diff options
| author | Thomas Voss <mail@thomasvoss.com> | 2024-11-27 20:54:24 +0100 |
|---|---|---|
| committer | Thomas Voss <mail@thomasvoss.com> | 2024-11-27 20:54:24 +0100 |
| commit | 4bfd864f10b68b71482b35c818559068ef8d5797 (patch) | |
| tree | e3989f47a7994642eb325063d46e8f08ffa681dc /doc/rfc/rfc1593.txt | |
| parent | ea76e11061bda059ae9f9ad130a9895cc85607db (diff) | |
doc: Add RFC documents
Diffstat (limited to 'doc/rfc/rfc1593.txt')
| -rw-r--r-- | doc/rfc/rfc1593.txt | 6723 |
1 files changed, 6723 insertions, 0 deletions
diff --git a/doc/rfc/rfc1593.txt b/doc/rfc/rfc1593.txt new file mode 100644 index 0000000..3bc44ec --- /dev/null +++ b/doc/rfc/rfc1593.txt @@ -0,0 +1,6723 @@ + + + + + + +Network Working Group W. McKenzie +Request for Comments: 1593 J. Cheng +Category: Informational IBM Networking Systems + March 1994 + + + SNA APPN Node MIB + +Status of this Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +Abstract + + This RFC describes IBM's SNMP support for SNA Advanced Peer-to-Peer + Networking (APPN) nodes. + +Table of Contents + + 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 + 2.0 Definitions . . . . . . . . . . . . . . . . . . . . . . . . 3 + 2.1 APPN Node Group . . . . . . . . . . . . . . . . . . . . . . 3 + 2.1.1 APPN Node General Information . . . . . . . . . . . . . 4 + 2.1.2 APPN Network Node Information . . . . . . . . . . . . . 6 + 2.1.3 APPN End Node Information . . . . . . . . . . . . . . . 8 + 2.1.4 APPN Port Information . . . . . . . . . . . . . . . . 10 + 2.1.4.1 General Port Information . . . . . . . . . . . . . 10 + 2.1.4.2 TCP/IP Port Information . . . . . . . . . . . . . 14 + 2.1.4.3 Data Link Switch Port Information . . . . . . . . 15 + 2.1.4.4 Token Ring Port Information . . . . . . . . . . . 16 + 2.1.4.5 Port DLC Trace Information . . . . . . . . . . . . 17 + 2.1.5 APPN Link Station Information . . . . . . . . . . . . 23 + 2.1.5.1 General Link Station Information . . . . . . . . . 23 + 2.1.5.2 TCP/IP Link Station Information . . . . . . . . . 35 + 2.1.5.3 Data Link Switch Link Station Information . . . . 37 + 2.1.5.4 Token Ring Link Station Information . . . . . . . 39 + 2.1.5.5 Link Station Status Information . . . . . . . . . 41 + 2.1.6 SNMP Performance Information for APPN Subagent . . . . 46 + 2.1.7 Performance Information for APPN Node . . . . . . . . 49 + 2.1.8 XID Statistics . . . . . . . . . . . . . . . . . . . . 50 + 2.2 APPN Topology Group . . . . . . . . . . . . . . . . . . . 51 + 2.2.1 Topology Performance Information . . . . . . . . . . . 52 + 2.2.1.1 Topology Route Information . . . . . . . . . . . . 58 + 2.2.2 Adjacent Node Table . . . . . . . . . . . . . . . . . 60 + 2.2.3 Network Node Topology . . . . . . . . . . . . . . . . 62 + 2.2.3.1 NN Topology Table (Indexed by Node Name) . . . . . 62 + + + +McKenzie & Cheng [Page 1] + +RFC 1593 SNA APPN Node MIB March 1994 + + + 2.2.3.2 NN TG Table (Indexed by Node Names and TG Number) 66 + 2.2.3.3 NN Topology Table (Indexed by FRSN and Node Name) 73 + 2.2.3.4 NN TG Table (Indexed by FRSN, Node Names, and TG + Number) . . . . . . . . . . . . . . . . . . . . . 77 + 2.3 APPN Node Local Topology Group . . . . . . . . . . . . . . 83 + 2.3.1 Local Topology This Node . . . . . . . . . . . . . . . 84 + 2.3.1.1 Local General Information . . . . . . . . . . . . 84 + 2.3.1.2 Local NN Specific Information . . . . . . . . . . 85 + 2.3.1.3 Local TG Information . . . . . . . . . . . . . . . 87 + 2.3.2 Client End Nodes Topology Known to Serving NN . . . . 93 + 2.3.2.1 Client End Nodes Information . . . . . . . . . . . 93 + 2.3.2.2 Client End Nodes TG Information (Tail Vectors) . . 94 + 2.4 APPN Directory Group . . . . . . . . . . . . . . . . . . . 99 + 2.4.1 Directory Performance Information . . . . . . . . . . 99 + 2.4.2 Directory Cache Table . . . . . . . . . . . . . . . . 102 + 2.5 APPN Class Of Service Group . . . . . . . . . . . . . . . 105 + 2.5.1 COS Mode Table . . . . . . . . . . . . . . . . . . . . 108 + 2.5.2 COS Name Table . . . . . . . . . . . . . . . . . . . . 109 + 2.5.3 COS Node Row Table . . . . . . . . . . . . . . . . . . 110 + 2.5.4 COS TG Row Table . . . . . . . . . . . . . . . . . . . 113 + 3.0 Acknowledgements . . . . . . . . . . . . . . . . . . . . . 119 + 4.0 Security Considerations . . . . . . . . . . . . . . . . . . 119 + 5.0 Authors' Addresses . . . . . . . . . . . . . . . . . . . . 120 + +1.0 Introduction + + This module contains managed objects which describe the following: + + o The APPN node (either an APPN network node or an APPN end node) + + o The connections of the node to other SNA nodes + + o The APPN network topology (as reflected in the network topology + database that is replicated in each APPN network node. + + This module does not describe the SNA logical units (LUs) served by + the APPN node nor does it describe the sessions between LUs. Managed + objects for that information are under development. + + + + + + + + + + + + + +McKenzie & Cheng [Page 2] + +RFC 1593 SNA APPN Node MIB March 1994 + + +2.0 Definitions + + IBM-6611-APPN-MIB DEFINITIONS ::= BEGIN + + IMPORTS + + enterprises, Counter, IpAddress, + Gauge, TimeTicks + FROM RFC1155-SMI + + DisplayString + FROM RFC1213-MIB + + OBJECT-TYPE + FROM RFC-1212; + + + + -- ****************************************************************** + ibm OBJECT IDENTIFIER ::= { enterprises 2 } + ibmProd OBJECT IDENTIFIER ::= { ibm 6 } + ibm6611 OBJECT IDENTIFIER ::= { ibmProd 2 } + ibmappn OBJECT IDENTIFIER ::= { ibm6611 13 } + + -- ******************** The APPN Node Group ********************* + + ibmappnNode OBJECT IDENTIFIER ::= { ibmappn 1 } + ibmappnGeneralInfoAndCaps OBJECT IDENTIFIER ::= { ibmappnNode 1 } + ibmappnNnUniqueInfoAndCaps OBJECT IDENTIFIER ::= { ibmappnNode 2 } + ibmappnEnUniqueCaps OBJECT IDENTIFIER ::= { ibmappnNode 3 } + ibmappnPortInformation OBJECT IDENTIFIER ::= { ibmappnNode 4 } + ibmappnLinkStationInformation OBJECT IDENTIFIER ::= { ibmappnNode 5 } + ibmappnSnmpInformation OBJECT IDENTIFIER ::= { ibmappnNode 6 } + ibmappnMemoryUse OBJECT IDENTIFIER ::= { ibmappnNode 7 } + ibmappnXidInformation OBJECT IDENTIFIER ::= { ibmappnNode 8 } + + -- This group provides global information about the + -- APPN node, which is either a network node or an end node. + + + -- The first section applies to all APPN nodes. + -- The second section applies only to network nodes. + -- The third section applies only to end nodes. + -- The fourth section applies to Port information. + -- The fifth section applies to SNA link station Information. + -- The sixth section applies to SNMP traffic for this APPN sub-agent + -- The seventh section applies to APPN memory usage. + -- The eighth section applies to XID activities. + + + +McKenzie & Cheng [Page 3] + +RFC 1593 SNA APPN Node MIB March 1994 + + + -- APPN General Information + -- This section applies to both network and end nodes. + + + ibmappnNodeCpName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned network name + for this node in the format NETID.CPNAME." + + ::= { ibmappnGeneralInfoAndCaps 1 } + + ibmappnNodeNetid OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned APPN network identification, + which can be from one to eight characters. + This ID is used with the control point name + to create a fully-qualified control point name." + + ::= { ibmappnGeneralInfoAndCaps 2 } + + ibmappnNodeBlockNum OBJECT-TYPE + SYNTAX DisplayString (SIZE (3)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The block number is the first three digits of the node_id. + These 3 hexadecimal digits identify the product and are not + configurable." + + ::= { ibmappnGeneralInfoAndCaps 3 } + + ibmappnNodeIdNum OBJECT-TYPE + SYNTAX DisplayString (SIZE (5)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The ID number is the last 5 digits of the node_id. + These 5 hexadecimal digits are administratively defined and + combined with the 3 digit block number form the node_id. + This node_id is used to identify the local node and is + include in APPN alerts as well as being included in XIDs. + A unique value is required for connections to SNA + + + +McKenzie & Cheng [Page 4] + +RFC 1593 SNA APPN Node MIB March 1994 + + + sub-area." + + ::= { ibmappnGeneralInfoAndCaps 4 } + + ibmappnNodeType OBJECT-TYPE + SYNTAX INTEGER { + networkNode(1), + endNode(2), + len(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of APPN node, either network, len, or end node." + + ::= { ibmappnGeneralInfoAndCaps 5 } + + ibmappnNodeUpTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Time (in hundredths of a second) since this APPN node + was initialized." + + ::= { ibmappnGeneralInfoAndCaps 6 } + + ibmappnNodeNegotLs OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports negotiable + link stations." + + ::= { ibmappnGeneralInfoAndCaps 7 } + + ibmappnNodeSegReasm OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports segment + reassembly. This is only supported when + segment generation is also supported." + + ::= { ibmappnGeneralInfoAndCaps 8 } + + + + +McKenzie & Cheng [Page 5] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNodeBindReasm OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports Bind segment + reassembly. This will only be supported when Bind + segment generation is also supported." + + ::= { ibmappnGeneralInfoAndCaps 9 } + + ibmappnNodeParallelTg OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports parallel TGs." + + ::= { ibmappnGeneralInfoAndCaps 10 } + + ibmappnNodeService OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node allows call-in from nodes not + defined locally." + + ::= { ibmappnGeneralInfoAndCaps 11 } + + ibmappnNodeAdaptiveBindPacing OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports adaptive bind pacing." + + ::= { ibmappnGeneralInfoAndCaps 12 } + + + + -- ************************************************************** + -- APPN Network Node Information + -- This section provides global information about the + -- APPN network node. + + ibmappnNodeNnRcvRegChar OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + + + +McKenzie & Cheng [Page 6] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports receiving registered + characteristics." + + ::= { ibmappnNnUniqueInfoAndCaps 1 } + + ibmappnNodeNnGateway OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this is a gateway node." + + ::= { ibmappnNnUniqueInfoAndCaps 2 } + + ibmappnNodeNnCentralDirectory OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports central directory + cache." + + ::= { ibmappnNnUniqueInfoAndCaps 3 } + + ibmappnNodeNnTreeCache OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports route tree cache." + + ::= { ibmappnNnUniqueInfoAndCaps 4 } + + ibmappnNodeNnTreeUpdate OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports + incremental_tree_update, which is only + supported when tree caching is supported." + + ::= { ibmappnNnUniqueInfoAndCaps 5 } + + ibmappnNodeNnRouteAddResist OBJECT-TYPE + + + +McKenzie & Cheng [Page 7] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Route addition resistance is a value that + indicates the relative desirability + of using this node for intermediate session traffic. + The value, which can be any integer 0-255, + is used in route computation. The lower the value, + the more desirable the node is for intermediate routing." + + ::= { ibmappnNnUniqueInfoAndCaps 6 } + + ibmappnNodeNnIsr OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node supports intermediate + session routing." + + ::= { ibmappnNnUniqueInfoAndCaps 7 } + + ibmappnNodeNnFrsn OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Flow reduction sequence numbers (FRSNs) are associated + with Topology Database Updates (TDUs) and are unique + only within each APPN network node. A TDU can be + associated with multiple APPN resources. This object + is the last FRSN sent in a topology update to + adjacent network nodes." + + ::= { ibmappnNnUniqueInfoAndCaps 8 } + + + -- ************************************************************** + -- APPN End Node Information + + ibmappnNodeEnSegGen OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this end node supports segment generation." + + + + +McKenzie & Cheng [Page 8] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnEnUniqueCaps 1 } + + ibmappnNodeEnModeCosMap OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this end node supports + mode name to COS name mapping." + + ::= { ibmappnEnUniqueCaps 2 } + + ibmappnNodeEnLocateCdinit OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this end node supports Locate Cdinit." + + ::= { ibmappnEnUniqueCaps 3 } + + ibmappnNodeEnSendRegNames OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node will register its LUs with the + adjacent serving network node: + + NO - do not register names + YES - register names" + + ::= { ibmappnEnUniqueCaps 4 } + + ibmappnNodeEnSendRegChar OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node supports + send register characteristics, which is only + supported when send registered names is also + supported." + + ::= { ibmappnEnUniqueCaps 5 } + + + + + + +McKenzie & Cheng [Page 9] + +RFC 1593 SNA APPN Node MIB March 1994 + + + -- ************************************************************** + -- APPN Port information + -- + + + ibmappnNodePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodePortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Port table describes the configuration and current + status of the ports used by APPN. The type of DLC is + included in this table as a pointer to the DLC port + specific tables." + + ::= { ibmappnPortInformation 1 } + + ibmappnNodePortEntry OBJECT-TYPE + SYNTAX IbmappnNodePortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Port Name is used as the index to this table." + + INDEX + { ibmappnNodePortName } + + ::= { ibmappnNodePortTable 1 } + + IbmappnNodePortEntry ::= SEQUENCE { + ibmappnNodePortName DisplayString, + ibmappnNodePortState INTEGER, + + ibmappnNodePortDlcType INTEGER, + ibmappnNodePortPortType INTEGER, + ibmappnNodePortSIMRIM INTEGER, + ibmappnNodePortLsRole INTEGER, + ibmappnNodePortMaxRcvBtuSize INTEGER, + ibmappnNodePortMaxIframeWindow INTEGER, + ibmappnNodePortDefLsGoodXids Counter, + ibmappnNodePortDefLsBadXids Counter, + ibmappnNodePortDynLsGoodXids Counter, + ibmappnNodePortDynLsBadXids Counter, + ibmappnNodePortSpecific OBJECT IDENTIFIER + } + + + ibmappnNodePortName OBJECT-TYPE + + + +McKenzie & Cheng [Page 10] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this APPN port. + The name can be from one to eight characters." + + ::= { ibmappnNodePortEntry 1 } + + ibmappnNodePortState OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + pendactive(2), + active(3), + pendinact(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the current state of this port." + + ::= { ibmappnNodePortEntry 2 } + + ibmappnNodePortDlcType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + sdlc(2), + dls(3), + socket(4), + ethernet(5), + tokenRing(6) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of DLC interface, distinguished according + to the protocol immediately 'below' this layer." + + ::= { ibmappnNodePortEntry 3 } + + ibmappnNodePortPortType OBJECT-TYPE + SYNTAX INTEGER { + leased(1), + switched(2), + sharedAccessFacilities(3) + } + ACCESS read-only + STATUS mandatory + + + +McKenzie & Cheng [Page 11] + +RFC 1593 SNA APPN Node MIB March 1994 + + + DESCRIPTION + "Identifies the type of line used by this port." + + ::= { ibmappnNodePortEntry 4 } + + ibmappnNodePortSIMRIM OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether Set Initialization Mode (SIM) and + Receive Initialization Mode (RIM) are supported." + + ::= { ibmappnNodePortEntry 5 } + + ibmappnNodePortLsRole OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + negotiable(3), + abm(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Initial role for LSs activated through this port, + where 'abm' indicates asynchronous balance mode." + + ::= { ibmappnNodePortEntry 6 } + + ibmappnNodePortMaxRcvBtuSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum Basic Transmission Size (BTU) that a + link station on this port can receive." + + ::= { ibmappnNodePortEntry 7 } + + ibmappnNodePortMaxIframeWindow OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum number of I-frames that can be received + by the XID sender before an acknowledgement is received." + + + + +McKenzie & Cheng [Page 12] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnNodePortEntry 8 } + + ibmappnNodePortDefLsGoodXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of successfull XIDs that have occurred + on all defined link stations on this port since the last + time this port was started." + + ::= { ibmappnNodePortEntry 9 } + + ibmappnNodePortDefLsBadXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of unsuccessfull XIDs that have occurred + on all defined link stations on this port since the last + time this port was started." + + ::= { ibmappnNodePortEntry 10 } + + ibmappnNodePortDynLsGoodXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of successfull XIDs that have occurred + on all dynamic link stations on this port since the last + time this port was started." + + ::= { ibmappnNodePortEntry 11 } + + ibmappnNodePortDynLsBadXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of unsuccessfull XIDs that have occurred + on all dynamic link stations on this port since the last + time this port was started." + + ::= { ibmappnNodePortEntry 12 } + + ibmappnNodePortSpecific OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + + + +McKenzie & Cheng [Page 13] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Identifies the port specific OBJECT IDENTIFIER + that can provide additional information." + + ::= { ibmappnNodePortEntry 13 } + + + + -- ************************************************************** + -- + -- + + ibmappnNodePortIpTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodePortIpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Port table (TCP/IP specific)." + + ::= { ibmappnPortInformation 2 } + + ibmappnNodePortIpEntry OBJECT-TYPE + SYNTAX IbmappnNodePortIpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The IP Name is used as the index to this table." + + INDEX + {ibmappnNodePortIpName } + + ::= { ibmappnNodePortIpTable 1 } + + IbmappnNodePortIpEntry ::= SEQUENCE { + ibmappnNodePortIpName DisplayString, + ibmappnNodePortIpPortNum INTEGER + } + + ibmappnNodePortIpName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this APPN port. + The name can be from one to eight characters." + + + + +McKenzie & Cheng [Page 14] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnNodePortIpEntry 1 } + + ibmappnNodePortIpPortNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local TCP/IP port number." + + ::= { ibmappnNodePortIpEntry 2 } + + + + -- ************************************************************** + -- + -- + + ibmappnNodePortDlsTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodePortDlsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Port table (DLS specific)." + + ::= { ibmappnPortInformation 3 } + + ibmappnNodePortDlsEntry OBJECT-TYPE + SYNTAX IbmappnNodePortDlsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The DLS Name is used as the index to this table." + + INDEX + {ibmappnNodePortDlsName } + + ::= { ibmappnNodePortDlsTable 1 } + + IbmappnNodePortDlsEntry ::= SEQUENCE { + ibmappnNodePortDlsName DisplayString, + ibmappnNodePortDlsMac OCTET STRING, + ibmappnNodePortDlsSap OCTET STRING + } + + ibmappnNodePortDlsName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + + + +McKenzie & Cheng [Page 15] + +RFC 1593 SNA APPN Node MIB March 1994 + + + DESCRIPTION + "Administratively-assigned name for this APPN DLS port. + The name can be from one to eight characters." + + ::= { ibmappnNodePortDlsEntry 1 } + + ibmappnNodePortDlsMac OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (6)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local DLS MAC address." + + ::= { ibmappnNodePortDlsEntry 2 } + + ibmappnNodePortDlsSap OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local DLS Sap address." + + ::= { ibmappnNodePortDlsEntry 3 } + + + + -- ************************************************************** + -- + -- + + ibmappnNodePortTrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodePortTrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Port table (Token Ring specific)." + + ::= { ibmappnPortInformation 4 } + + ibmappnNodePortTrEntry OBJECT-TYPE + SYNTAX IbmappnNodePortTrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The TR Name is used as the index to this table." + + INDEX + {ibmappnNodePortTrName } + + + +McKenzie & Cheng [Page 16] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnNodePortTrTable 1 } + + IbmappnNodePortTrEntry ::= SEQUENCE { + ibmappnNodePortTrName DisplayString, + ibmappnNodePortTrMac OCTET STRING, + ibmappnNodePortTrSap OCTET STRING + } + + ibmappnNodePortTrName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this APPN port. + The name can be from one to eight characters." + + ::= { ibmappnNodePortTrEntry 1 } + + ibmappnNodePortTrMac OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (6)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local Token Ring MAC address." + + ::= { ibmappnNodePortTrEntry 2 } + + ibmappnNodePortTrSap OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local Token Ring Sap address." + + ::= { ibmappnNodePortTrEntry 3 } + + + -- ************************************************************** + -- APPN generic DLC Trace + -- + + ibmappnNodePortDlcTraceTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodePortDlcTraceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Port table generic DLC trace table." + + + + +McKenzie & Cheng [Page 17] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnPortInformation 5 } + + ibmappnNodePortDlcTraceEntry OBJECT-TYPE + SYNTAX IbmappnNodePortDlcTraceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Port name and a dynamic integer are the index to + this table." + + INDEX + {ibmappnNodePortDlcTracPortName, + ibmappnNodePortDlcTracIndex} + + ::= { ibmappnNodePortDlcTraceTable 1 } + + IbmappnNodePortDlcTraceEntry ::= SEQUENCE { + ibmappnNodePortDlcTracPortName DisplayString, + ibmappnNodePortDlcTracIndex INTEGER, + ibmappnNodePortDlcTracDlcType INTEGER, + ibmappnNodePortDlcTracLocalAddr DisplayString, + ibmappnNodePortDlcTracRemoteAddr DisplayString, + ibmappnNodePortDlcTracMsgType INTEGER, + ibmappnNodePortDlcTracCmdType INTEGER, + ibmappnNodePortDlcTracUseWan INTEGER + } + + ibmappnNodePortDlcTracPortName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Port name associated with this this trace table entry." + + ::= { ibmappnNodePortDlcTraceEntry 1 } + + ibmappnNodePortDlcTracIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This index value is updated every time a new trace entry + is created which provides a means to retrieve only the + updated entries and also provides a simple method of + correlating the entries. The table will wrap when the + table is full, which will result in previous entries + being written over. The mangement station can over + come this by retrieving the table using this index to + + + +McKenzie & Cheng [Page 18] + +RFC 1593 SNA APPN Node MIB March 1994 + + + retrieve only the new table entries." + + ::= { ibmappnNodePortDlcTraceEntry 2 } + + ibmappnNodePortDlcTracDlcType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + sdlc(2), + dls(3), + socket(4), + ethernet(5), + tokenRing(6) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of DLC interface, distinguished according + to the protocol immediately 'below' this layer." + + ::= { ibmappnNodePortDlcTraceEntry 3 } + + ibmappnNodePortDlcTracLocalAddr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local address in format described below: + + other = free form DisplayString + ip = ld. ld. ld. ld / 2d + tr = lx: lx: lx: lx: lx: lx . lx + dlsw = lx: lx: lx: lx: lx: lx . lx + ethernet = lx: lx: lx: lx: lx: lx . lx + " + + ::= { ibmappnNodePortDlcTraceEntry 4 } + + + ibmappnNodePortDlcTracRemoteAddr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Remote Address in the format described below: + other = free form DisplayString + ip = ld. ld. ld. ld / 2d + tr = lx: lx: lx: lx: lx: lx . lx + dlsw = lx: lx: lx: lx: lx: lx . lx + + + +McKenzie & Cheng [Page 19] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ethernet = lx: lx: lx: lx: lx: lx . lx + " + + ::= { ibmappnNodePortDlcTraceEntry 5 } + + + ibmappnNodePortDlcTracMsgType OBJECT-TYPE + SYNTAX INTEGER { + -- enumeration values between 1 and 1999 are reserved + -- for potential undefined message types. + other(1), + unknown(2), + request(3), + confirm(4), + indication(5), + response(6) + + -- enumeration values between 2000 and 3999 are reserved + -- for IP socket traces, + + + + -- enumeration values between 4000 and 5999 are reserved + -- for DLS traces, + + + + -- enumeration values between 6000 and 7999 are reserved + -- for TR traces, + + + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the type of trace record entry" + + ::= { ibmappnNodePortDlcTraceEntry 6 } + + ibmappnNodePortDlcTracCmdType OBJECT-TYPE + SYNTAX INTEGER { + -- enumeration values between 1 and 1999 are reserved + -- for potential undefined message types. + + testFrame(1), + respFrame(2), + curFrame(3), + icrFrame(4), + + + +McKenzie & Cheng [Page 20] + +RFC 1593 SNA APPN Node MIB March 1994 + + + respAck(5), + dgrmFrame(6), + xidFrame(7), + contFrame(8), + contedFrame(9), + iFrame(10), + enterBusy(12), + exitBusy(13), + haltFrame(14), + lsHalted(15), + restartLs(16), + lsRestarted(17), + netBioSnq(18), + netBioSnr(19), + gnetFrame(20), + netdFrame(21), + oobFrame(22), + alterSap(23), + testRsp(24), + haltLsNow(25), + testReq(26), + + -- enumeration values between 2000 and 3999 are reserved + -- for IP socket traces. + ipTestFrame(2001), + ipRespFrame(2002), + ipCurFrame(2003), + ipIcrFrame(2004), + ipRespAck(2005), + ipDgrmFrame(2006), + ipXidFrame(2007), + ipContFrame(2008), + ipContedFrame(2009), + ipIFrame(2010), + ipEnterBusy(2012), + ipExitBusy(2013), + ipHaltFrame(2014), + ipLsHalted(2015), + ipRestartLs(2016), + ipLsRestarted(2017), + ipNetBioSnq(2018), + ipNetBioSnr(2019), + ipGnetFrame(2020), + ipNetdFrame(2021), + ipOobFrame(2022), + ipAlterSap(2023), + ipTestRsp(2024), + ipHaltLsNow(2025), + + + +McKenzie & Cheng [Page 21] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ipTestReq(2026), + + -- enumeration values between 4000 and 5999 are reserved + -- for DLS traces. + + dlsIpm(4124), + + -- enumeration values between 6000 and 7999 are reserved for + -- TR traces. + trTestFrame(6001), + trRespFrame(6002), + trCurFrame(6003), + trIcrFrame(6004), + trRespAck(6005), + trDgrmFrame(6006), + trXidFrame(6007), + trContFrame(6008), + trContedFrame(6009), + trIFrame(6010), + trEnterBusy(6012), + trExitBusy(6013), + trHaltFrame(6014), + trLsHalted(6015), + trRestartLs(6016), + trLsRestarted(6017), + trNetBioSnq(6018), + trNetBioSnr(6019), + trGnetFrame(6020), + trNetdFrame(6021), + trOobFrame(6022), + trAlterSap(6023), + trTestRsp(6024), + trHaltLsNow(6025), + trTestReq(6026) + + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the command type of the trace entry." + + ::= { ibmappnNodePortDlcTraceEntry 7 } + + ibmappnNodePortDlcTracUseWan OBJECT-TYPE + SYNTAX INTEGER { + other(1), + notApplicable(2), + useUnknown(3), + + + +McKenzie & Cheng [Page 22] + +RFC 1593 SNA APPN Node MIB March 1994 + + + useWan(4), + useLan(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the type of connection of the trace entry. + For example, token ring and ethernet ports will have + useLan as connection. For the dls port, it could be + either useWan if connection is across Wan via dls + sessions, or useLan if connection is to a local attached + LAN." + + ::= { ibmappnNodePortDlcTraceEntry 8 } + + + + -- ************************************************************** + -- APPN Link Station Information + -- + + + ibmappnNodeLsTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodeLsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains detail information about the + link station configuration and current status." + + ::= { ibmappnLinkStationInformation 1 } + + ibmappnNodeLsEntry OBJECT-TYPE + SYNTAX IbmappnNodeLsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is indexed by the link station name." + + INDEX + { ibmappnNodeLsName } + + ::= { ibmappnNodeLsTable 1 } + + IbmappnNodeLsEntry ::= SEQUENCE { + ibmappnNodeLsName DisplayString, + ibmappnNodeLsPortName DisplayString, + ibmappnNodeLsDlcType INTEGER, + + + +McKenzie & Cheng [Page 23] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNodeLsDynamic INTEGER, + ibmappnNodeLsState INTEGER, + -- ls defined data / xid info + ibmappnNodeLsCpName DisplayString, + ibmappnNodeLsTgNum INTEGER, + ibmappnNodeLsLimResource INTEGER, + ibmappnNodeLsMigration INTEGER, + ibmappnNodeLsBlockNum DisplayString, + ibmappnNodeLsIdNum DisplayString, + ibmappnNodeLsCpCpSession INTEGER, + -- ls parms (common) / xid info + ibmappnNodeLsTargetPacingCount INTEGER, + ibmappnNodeLsMaxSendBtuSize INTEGER, + -- tg characteristics + ibmappnNodeLsEffCap INTEGER, + ibmappnNodeLsConnCost INTEGER, + ibmappnNodeLsByteCost INTEGER, + ibmappnNodeLsSecurity INTEGER, + ibmappnNodeLsDelay INTEGER, + ibmappnNodeLsUsr1 INTEGER, + ibmappnNodeLsUsr2 INTEGER, + ibmappnNodeLsUsr3 INTEGER, + -- ls (performance data) + ibmappnNodeLsInXidBytes Counter, + ibmappnNodeLsInMsgBytes Counter, + ibmappnNodeLsInXidFrames Counter, + ibmappnNodeLsInMsgFrames Counter, + ibmappnNodeLsOutXidBytes Counter, + ibmappnNodeLsOutMsgBytes Counter, + ibmappnNodeLsOutXidFrames Counter, + ibmappnNodeLsOutMsgFrames Counter, + -- ls (propgation delay) + ibmappnNodeLsEchoRsps Counter, + ibmappnNodeLsCurrentDelay INTEGER, + ibmappnNodeLsMaxDelay INTEGER, + ibmappnNodeLsMinDelay INTEGER, + ibmappnNodeLsMaxDelayTime TimeTicks, + -- ls (Xid Statistics) + ibmappnNodeLsGoodXids Counter, + ibmappnNodeLsBadXids Counter, + -- Dlc specific + ibmappnNodeLsSpecific OBJECT IDENTIFIER, + ibmappnNodeLsSubState INTEGER, + ibmappnNodeLsStartTime TimeTicks, + ibmappnNodeLsActiveTime TimeTicks, + ibmappnNodeLsCurrentStateTime TimeTicks + } + + + + +McKenzie & Cheng [Page 24] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNodeLsName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for the link station. + The name can be from one to eight characters." + + ::= { ibmappnNodeLsEntry 1 } + + + ibmappnNodeLsPortName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for the port. + The name can be from one to eight characters." + + ::= { ibmappnNodeLsEntry 2 } + + + ibmappnNodeLsDlcType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + sdlc(2), + dls(3), + socket(4), + ethernet(5), + tokenRing(6) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of DLC interface, distinguished according + to the protocol immediately 'below' this layer." + + ::= { ibmappnNodeLsEntry 3 } + + ibmappnNodeLsDynamic OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Identifies whether this resource is a dynamic link station. + Dynamic link stations are created when adjacent nodes + that have not been locally defined establish a connection + with this node." + + + +McKenzie & Cheng [Page 25] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnNodeLsEntry 4 } + + + ibmappnNodeLsState OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + pendactive(2), + active(3), + pendinact(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "State of this link station." + + ::= { ibmappnNodeLsEntry 5 } + + ibmappnNodeLsCpName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Fully-qualified name of the adjacent node for this link + station. The name can be from three to seventeen + characters. Format is netid.cpname." + + ::= { ibmappnNodeLsEntry 6 } + + ibmappnNodeLsTgNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number associated with the TG to this link station." + + ::= { ibmappnNodeLsEntry 7 } + + ibmappnNodeLsLimResource OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the link station is + a limited resource. If it is, the TG + is deactivated when there are no sessions." + + ::= { ibmappnNodeLsEntry 8 } + + + + +McKenzie & Cheng [Page 26] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNodeLsMigration OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this link station will be used + for connections to down-level or migration partners." + + ::= { ibmappnNodeLsEntry 9 } + + ibmappnNodeLsBlockNum OBJECT-TYPE + SYNTAX DisplayString (SIZE (3)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The block number is the first three digits of the node_id. + These 3 hexideimal digits identify the product and are not + configurable." + + ::= { ibmappnNodeLsEntry 10 } + + ibmappnNodeLsIdNum OBJECT-TYPE + SYNTAX DisplayString (SIZE (5)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The ID number is the last 5 digits of the node_id. + These 5 hexadecimal digits are administratively defined and + combined with the 3 digit block number form the node_id. + This node_id is used to identify the local node and is + include in APPN alerts as well as being included in XIDs. + A unique value is required for connections to SNA + sub-area." + + ::= { ibmappnNodeLsEntry 11 } + + ibmappnNodeLsCpCpSession OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether CP-CP sessions are + supported by this link station." + + ::= { ibmappnNodeLsEntry 12 } + + ibmappnNodeLsTargetPacingCount OBJECT-TYPE + SYNTAX INTEGER + + + +McKenzie & Cheng [Page 27] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Numeric value between 0 and 32767 inclusive indicating + the desired pacing window size for BINDs on this TG. + The number is significant only when fixed bind pacing + is being performed." + + ::= { ibmappnNodeLsEntry 13 } + + ibmappnNodeLsMaxSendBtuSize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Numeric value between 0 and 32767 inclusive indicating + the desired number of bytes in a Basic Transmission Unit + (BTU) that can be sent on this TG. + This is an administratively assigned value." + + ::= { ibmappnNodeLsEntry 14 } + + ibmappnNodeLsEffCap OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The effective capacity is an integer value that indicates + the kilo bits per second. + It is derived from the link bandwidth and maximum load + factor with the range of 0 thru 603,979,776. + This is an administratively assigned value associated + with the TG using this link station." + + ::= { ibmappnNodeLsEntry 15 } + + ibmappnNodeLsConnCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Cost per connect time: a value representing + the relative cost per unit of time to use + the TG. Range is from 0, which means no cost, + to 255, which indicates maximum cost. + This is an administratively assigned value associated + with the TG using this link station." + + + + +McKenzie & Cheng [Page 28] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnNodeLsEntry 16 } + + ibmappnNodeLsByteCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Relative cost of transmitting a byte over this link. + Range is from 0 (lowest cost) to 255. + This is an administratively assigned value associated + with the TG using this link station." + + ::= { ibmappnNodeLsEntry 17 } + + ibmappnNodeLsSecurity OBJECT-TYPE + SYNTAX INTEGER { + nonsecure(1), --X'01' + publicSwitchedNetwork(32), --X'20' + undergroundCable(64), --X'40' + secureConduit(96), --X'60' + guardedConduit(128), --X'80' + encrypted(160), --X'A0' + guardedRadiation(192) --X'C0' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The security is represented as an integer with a range of + 1 thru 255 with the most common values enumerated as + defined above. + This is an administratively assigned value associated + with the TG using this link station." + + ::= { ibmappnNodeLsEntry 18 } + + ibmappnNodeLsDelay OBJECT-TYPE + SYNTAX INTEGER { + minimum(0), --X'00' + negligible(384), --X'4C' + terrestrial(9216), --X'71' + packet(147456), --X'91' + long(294912), --X'99' + maximum(2013265920) --X'FF' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Relative amount of time that it takes for a signal to + + + +McKenzie & Cheng [Page 29] + +RFC 1593 SNA APPN Node MIB March 1994 + + + travel the length of the logical link. This time is + represented in micro seconds, with some of the more + common values enumerated. + This is an administratively assigned value associated + with the TG using this link station." + + ::= { ibmappnNodeLsEntry 19 } + + ibmappnNodeLsUsr1 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "First user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with the TG using this link station." + + ::= { ibmappnNodeLsEntry 20 } + + ibmappnNodeLsUsr2 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Second user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with the TG using this link station." + + ::= { ibmappnNodeLsEntry 21 } + + ibmappnNodeLsUsr3 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Third user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with the TG using this link station." + + ::= { ibmappnNodeLsEntry 22 } + + ibmappnNodeLsInXidBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + + + +McKenzie & Cheng [Page 30] + +RFC 1593 SNA APPN Node MIB March 1994 + + + DESCRIPTION + "Number of XID bytes received." + + ::= { ibmappnNodeLsEntry 23 } + + ibmappnNodeLsInMsgBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of message (I-frame) bytes received." + + ::= { ibmappnNodeLsEntry 24 } + + ibmappnNodeLsInXidFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of XID frames received." + + ::= { ibmappnNodeLsEntry 25 } + + ibmappnNodeLsInMsgFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of message (I-frame) frames received." + + ::= { ibmappnNodeLsEntry 26 } + + ibmappnNodeLsOutXidBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of XID bytes sent." + + ::= { ibmappnNodeLsEntry 27 } + + ibmappnNodeLsOutMsgBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of message (I-frame) bytes sent." + + + + +McKenzie & Cheng [Page 31] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnNodeLsEntry 28 } + + ibmappnNodeLsOutXidFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of XID frames sent." + + ::= { ibmappnNodeLsEntry 29 } + + ibmappnNodeLsOutMsgFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of message (I-frame) frames sent." + + ::= { ibmappnNodeLsEntry 30 } + + ibmappnNodeLsEchoRsps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of responses returned from adjacent link station. + A response should be returned for each test frame sent by + this node. + Test frames are sent to adjacent nodes periodically to + verify connectivity and to measure that actual round trip + time, that is the time the test frame is sent until the + response is received." + + ::= { ibmappnNodeLsEntry 31 } + + ibmappnNodeLsCurrentDelay OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The time that it took for the last test signal to be + sent and returned from this link station to the + adjacent links station. + This time is represented in milliseconds." + + ::= { ibmappnNodeLsEntry 32 } + + ibmappnNodeLsMaxDelay OBJECT-TYPE + + + +McKenzie & Cheng [Page 32] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The longest time it took for a test signal + to be sent and returned from this link station to the + adjacent links station. + This time is represented in milliseconds ." + + ::= { ibmappnNodeLsEntry 33 } + + ibmappnNodeLsMinDelay OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The shortest time it took for a test signal + to be sent and returned from this link station to the + adjacent links station. + This time is represented in milliseconds." + + ::= { ibmappnNodeLsEntry 34 } + + ibmappnNodeLsMaxDelayTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The time (since system up in hundredth of seconds) + when the longest delay occurred. + This time can be used to identify when this high + water mark occurred in relation to the last initialization + of the APPN node." + + ::= { ibmappnNodeLsEntry 35 } + + ibmappnNodeLsGoodXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of successful XIDs that have occurred + on this link station since the time it was started." + + ::= { ibmappnNodeLsEntry 36 } + + ibmappnNodeLsBadXids OBJECT-TYPE + SYNTAX Counter + + + +McKenzie & Cheng [Page 33] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of unsuccessful XIDs that have occurred + on this link station since the time it was started." + + ::= { ibmappnNodeLsEntry 37 } + + ibmappnNodeLsSpecific OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Identifies the DLC specific OBJECT IDENTIFIER + that can provide additional information." + + ::= { ibmappnNodeLsEntry 38 } + + ibmappnNodeLsSubState OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + sentReqOpnstn(2), + pendXidExch(3), + sentActAs(4), + sentSetMode(5), + active(6), + sentDeactAsOrd(7), + sentDiscOrd(8), + sentDestroyTg(9), + sentCreateTg(10), + sentConnReq(11), + pendRcvConnInd(12), + pendSendConnRsp(13), + sentConnRsp(14), + pendDeact(15) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "State of this link station." + + ::= { ibmappnNodeLsEntry 39 } + + ibmappnNodeLsStartTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + + + +McKenzie & Cheng [Page 34] + +RFC 1593 SNA APPN Node MIB March 1994 + + + "The time (in hundredth of seconds) this link station + has been active the last time since the time APPN was + initialized." + + ::= { ibmappnNodeLsEntry 40 } + + ibmappnNodeLsActiveTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The time (in hundredth of seconds) this link station + has been in the active state. + A zero value indicates the link station has never been + active." + + ::= { ibmappnNodeLsEntry 41 } + + ibmappnNodeLsCurrentStateTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The time (in hundredth of seconds) the link station is + in the current state." + + ::= { ibmappnNodeLsEntry 42 } + + + -- ************************************************************** + -- Link station table (TCP/IP specific) + -- + + ibmappnNodeLsIpTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodeLsIpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Link station table (TCP/IP specific)." + + ::= { ibmappnLinkStationInformation 2 } + + ibmappnNodeLsIpEntry OBJECT-TYPE + SYNTAX IbmappnNodeLsIpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The IP Name is used as the index to this table." + + + +McKenzie & Cheng [Page 35] + +RFC 1593 SNA APPN Node MIB March 1994 + + + INDEX + {ibmappnNodeLsIpName } + + ::= { ibmappnNodeLsIpTable 1 } + + IbmappnNodeLsIpEntry ::= SEQUENCE { + ibmappnNodeLsIpName DisplayString, + ibmappnNodeLsIpState INTEGER, + ibmappnNodeLsLocalIpAddr IpAddress, + ibmappnNodeLsLocalIpPortNum INTEGER, + ibmappnNodeLsRemoteIpAddr IpAddress, + ibmappnNodeLsRemoteIpPortNum INTEGER + } + + ibmappnNodeLsIpName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this link station. The + name can be from one to eight characters." + + ::= { ibmappnNodeLsIpEntry 1 } + + ibmappnNodeLsIpState OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + pendactive(2), + active(3), + pendinact(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "State of this link station." + + ::= { ibmappnNodeLsIpEntry 2 } + + ibmappnNodeLsLocalIpAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local IP address." + + ::= { ibmappnNodeLsIpEntry 3 } + + ibmappnNodeLsLocalIpPortNum OBJECT-TYPE + + + +McKenzie & Cheng [Page 36] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local TCP/IP port number. + The default listening port will be administratively + assigned and will dynamically change if this node + initiates a session with adjacent node." + + ::= { ibmappnNodeLsIpEntry 4 } + + + + ibmappnNodeLsRemoteIpAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Remote IP address." + + ::= { ibmappnNodeLsIpEntry 5 } + + ibmappnNodeLsRemoteIpPortNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Remote TCP/IP port number." + + ::= { ibmappnNodeLsIpEntry 6 } + + + + -- ************************************************************** + -- Ls Table (DLS specific) + -- + + ibmappnNodeLsDlsTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodeLsDlsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Ls Table (DLS specific)." + + ::= { ibmappnLinkStationInformation 3 } + + ibmappnNodeLsDlsEntry OBJECT-TYPE + SYNTAX IbmappnNodeLsDlsEntry + + + +McKenzie & Cheng [Page 37] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The DLS Name is used as the index to this table." + + INDEX + {ibmappnNodeLsDlsName } + + ::= { ibmappnNodeLsDlsTable 1 } + + IbmappnNodeLsDlsEntry ::= SEQUENCE { + ibmappnNodeLsDlsName DisplayString, + ibmappnNodeLsDlsState INTEGER, + ibmappnNodeLsLocalDlsMac OCTET STRING, + ibmappnNodeLsLocalDlsSap OCTET STRING, + ibmappnNodeLsRemoteDlsMac OCTET STRING, + ibmappnNodeLsRemoteDlsSap OCTET STRING + } + + ibmappnNodeLsDlsName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this link station. + The name can be from one to eight characters." + + ::= { ibmappnNodeLsDlsEntry 1 } + + ibmappnNodeLsDlsState OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + pendactive(2), + active(3), + pendinact(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "State of this link station." + + ::= { ibmappnNodeLsDlsEntry 2 } + + ibmappnNodeLsLocalDlsMac OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (6)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + + + +McKenzie & Cheng [Page 38] + +RFC 1593 SNA APPN Node MIB March 1994 + + + "Local MAC address." + + ::= { ibmappnNodeLsDlsEntry 3 } + + ibmappnNodeLsLocalDlsSap OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local SAP address." + + ::= { ibmappnNodeLsDlsEntry 4 } + + ibmappnNodeLsRemoteDlsMac OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (6)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Remote MAC address." + + ::= { ibmappnNodeLsDlsEntry 5 } + + ibmappnNodeLsRemoteDlsSap OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Remote SAP address." + + ::= { ibmappnNodeLsDlsEntry 6 } + + + + -- ************************************************************** + -- Ls Table (Token Ring specific) + -- + + ibmappnNodeLsTrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodeLsTrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Ls Table (Token Ring specific)." + + ::= { ibmappnLinkStationInformation 4 } + + ibmappnNodeLsTrEntry OBJECT-TYPE + SYNTAX IbmappnNodeLsTrEntry + + + +McKenzie & Cheng [Page 39] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The TR Name is used as the index to this table." + INDEX + {ibmappnNodeLsTrName } + + ::= { ibmappnNodeLsTrTable 1 } + + IbmappnNodeLsTrEntry ::= SEQUENCE { + ibmappnNodeLsTrName DisplayString, + ibmappnNodeLsTrState INTEGER, + ibmappnNodeLsLocalTrMac OCTET STRING, + ibmappnNodeLsLocalTrSap OCTET STRING, + ibmappnNodeLsRemoteTrMac OCTET STRING, + ibmappnNodeLsRemoteTrSap OCTET STRING + } + + ibmappnNodeLsTrName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this link station. + The name can be from one to eight characters." + + ::= { ibmappnNodeLsTrEntry 1 } + + ibmappnNodeLsTrState OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + pendactive(2), + active(3), + pendinact(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "State of this link station." + + ::= { ibmappnNodeLsTrEntry 2 } + + ibmappnNodeLsLocalTrMac OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (6)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local MAC address." + + + +McKenzie & Cheng [Page 40] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnNodeLsTrEntry 3 } + + ibmappnNodeLsLocalTrSap OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Local SAP address." + + ::= { ibmappnNodeLsTrEntry 4 } + + ibmappnNodeLsRemoteTrMac OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (6)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Remote MAC address." + + ::= { ibmappnNodeLsTrEntry 5 } + + ibmappnNodeLsRemoteTrSap OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Remote SAP address." + + ::= { ibmappnNodeLsTrEntry 6 } + + + -- ************************************************************** + -- This table provides information about errors this node encountered + -- with connections to adjacent nodes. This includes all exceptional + -- conditions encountered establishing connections and all exceptional + -- conditions that result in terminating the connection. + -- ************************************************************** + + ibmappnNodeLsStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNodeLsStatusEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains information related to exceptional + and potential exceptional conditions that occur during + the activation, XID exchange, and termination of the + connection." + + ::= { ibmappnLinkStationInformation 5 } + + + +McKenzie & Cheng [Page 41] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNodeLsStatusEntry OBJECT-TYPE + SYNTAX IbmappnNodeLsStatusEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is indexed by the LsStatusIndex, which is an + integer that is continuously updated until it eventually + wraps. This provides the management station the ability + to retrieve only the updates to the table by using the + standard GET NEXT." + + INDEX + { ibmappnNodeLsStatusIndex } + + ::= { ibmappnNodeLsStatusTable 1 } + + IbmappnNodeLsStatusEntry ::= SEQUENCE { + ibmappnNodeLsStatusIndex INTEGER, + ibmappnNodeLsStatusTime TimeTicks, + ibmappnNodeLsStatusLsName DisplayString, + ibmappnNodeLsStatusCpName DisplayString, + ibmappnNodeLsStatusNodeId OCTET STRING, + ibmappnNodeLsStatusTgNum INTEGER, + ibmappnNodeLsStatusGeneralSense OCTET STRING, + ibmappnNodeLsStatusNofRetry INTEGER, + ibmappnNodeLsStatusEndSense OCTET STRING, + ibmappnNodeLsStatusXidLocalSense OCTET STRING, + ibmappnNodeLsStatusXidRemoteSense OCTET STRING, + ibmappnNodeLsStatusXidByteInError INTEGER, + ibmappnNodeLsStatusXidBitInError INTEGER, + ibmappnNodeLsStatusDlcType INTEGER, + ibmappnNodeLsStatusLocalAddr DisplayString, + ibmappnNodeLsStatusRemoteAddr DisplayString + } + + + ibmappnNodeLsStatusIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This index is continuous index this table." + + ::= { ibmappnNodeLsStatusEntry 1 } + + ibmappnNodeLsStatusTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + + + +McKenzie & Cheng [Page 42] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Time (in hundreds of a second) since this node was last + initialized." + + ::= { ibmappnNodeLsStatusEntry 2 } + + + ibmappnNodeLsStatusLsName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this link station." + + ::= { ibmappnNodeLsStatusEntry 3 } + + ibmappnNodeLsStatusCpName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned fully-qualified name of the + adjacent node partner. This will be provided when the + adjacent node has been defined at this node or when the + XID sequence has proceeded far enough to to identify the + adjacent node. A blank CP name will indicate the name is + unknown." + + ::= { ibmappnNodeLsStatusEntry 4 } + + ibmappnNodeLsStatusNodeId OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Adjacent Node id" + + + ::= { ibmappnNodeLsStatusEntry 5 } + + ibmappnNodeLsStatusTgNum OBJECT-TYPE + SYNTAX INTEGER (0..256) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number associated with the TG to this link station + with a range from 0 to 256. A value of 256 indicates + + + +McKenzie & Cheng [Page 43] + +RFC 1593 SNA APPN Node MIB March 1994 + + + the tg number has not been negotiated and is unknown at + this time." + + ::= { ibmappnNodeLsStatusEntry 6 } + + ibmappnNodeLsStatusGeneralSense OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The error sense code associated with the start sequence of + activation of a link up to the beginning of the XID + sequence." + + ::= { ibmappnNodeLsStatusEntry 7 } + + ibmappnNodeLsStatusNofRetry OBJECT-TYPE + SYNTAX INTEGER { + retry(1), + noretry(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether Node Operator Facility will retry the + start request to activate the link." + + ::= { ibmappnNodeLsStatusEntry 8 } + + ibmappnNodeLsStatusEndSense OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The sense code associated with the termination of the link + connection to adjacent node. This includes all sense + information included in the disconnect recieved from the + lower layer DLCs and also sense information indicating the + link termination originated by upper layer APPN components." + + ::= { ibmappnNodeLsStatusEntry 9 } + + ibmappnNodeLsStatusXidLocalSense OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The error sense code associated with the rejection of the + + + +McKenzie & Cheng [Page 44] + +RFC 1593 SNA APPN Node MIB March 1994 + + + XID." + + ::= { ibmappnNodeLsStatusEntry 10 } + + ibmappnNodeLsStatusXidRemoteSense OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The error sense code adjacent node returned to this node + indicating the reason the XID was rejected." + + ::= { ibmappnNodeLsStatusEntry 11 } + + ibmappnNodeLsStatusXidByteInError OBJECT-TYPE + SYNTAX INTEGER { + na(1000) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This identifies the actual byte in the XID that caused the + error. The value of zero (0) indicates that the variable + has no meaning." + + ::= { ibmappnNodeLsStatusEntry 12 } + + ibmappnNodeLsStatusXidBitInError OBJECT-TYPE + SYNTAX INTEGER { + na(8) -- not applicable + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This identifies the actual bit within the error byte of the + XID. This only has meaning when the byte in error is + greater than zero." + + ::= { ibmappnNodeLsStatusEntry 13 } + + ibmappnNodeLsStatusDlcType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + sdlc(2), + dls(3), + socket(4), + ethernet(5), + tr(6) + + + +McKenzie & Cheng [Page 45] + +RFC 1593 SNA APPN Node MIB March 1994 + + + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This identifies DLC type that was being used when error + occurred. This also is used to the format of the + local and remote address provided. + + other = free form DisplayString + + ip = ld. ld. ld. ld / 2d + + tr = lx: lx: lx: lx: lx: lx . lx + + dlsw = lx: lx: lx: lx: lx: lx . lx + + ethernet = lx: lx: lx: lx: lx: lx . lx + + " + + ::= { ibmappnNodeLsStatusEntry 14 } + + ibmappnNodeLsStatusLocalAddr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This contains a displayable string that identifies the + DLC type and appropriate address. See DlcType above for + details of the format." + + ::= { ibmappnNodeLsStatusEntry 15 } + + ibmappnNodeLsStatusRemoteAddr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This contains a displayable string that identifies the + DLC type and appropriate address. See DlcType above for + details of the format." + + ::= { ibmappnNodeLsStatusEntry 16 } + + + + -- ************************************************************** + -- APPN SNMP Performance Information + + + +McKenzie & Cheng [Page 46] + +RFC 1593 SNA APPN Node MIB March 1994 + + + -- + + ibmappnSnmpInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of messages delivered to the APPN SNMP sub-agent." + + ::= { ibmappnSnmpInformation 1 } + + ibmappnSnmpInGetRequests OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of GET requests delivered to the APPN SNMP + sub-agent." + + ::= { ibmappnSnmpInformation 2 } + + ibmappnSnmpInGetNexts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of GETNEXT requests delivered to the APPN SNMP + sub-agent." + + ::= { ibmappnSnmpInformation 3 } + + ibmappnSnmpInSetRequests OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of SET requests delivered to the APPN SNMP + sub-agent." + + ::= { ibmappnSnmpInformation 4 } + + ibmappnSnmpInTotalVars OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of VARIABLES included in both + GET and GETNEXT requests to the APPN SNMP sub-agent." + + + +McKenzie & Cheng [Page 47] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnSnmpInformation 5 } + + ibmappnSnmpInGetVars OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of VARIBLES included in all + GET requests to the APPN SNMP sub-agent." + + ::= { ibmappnSnmpInformation 6 } + + ibmappnSnmpInGetNextVars OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of VARIABLES included in all + GETNEXT requests to the APPN SNMP sub-agent." + + ::= { ibmappnSnmpInformation 7 } + + ibmappnSnmpInSetVars OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of VARIBLES included in all + SET requests to the APPN SNMP sub-agent." + + ::= { ibmappnSnmpInformation 8 } + + ibmappnSnmpOutNoSuchNames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of VARIABLES that could not + be found by the APPN SNMP sub-agent." + + ::= { ibmappnSnmpInformation 9 } + + ibmappnSnmpOutGenErrs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of undefined errors that + + + +McKenzie & Cheng [Page 48] + +RFC 1593 SNA APPN Node MIB March 1994 + + + occurred processing SNMP request to the + APPN SNMP sub-agent." + + ::= { ibmappnSnmpInformation 10 } + + + -- ************************************************************** + + -- This group provides global information about the + -- APPN node performance. + + -- The first section applies to the APPN control point + -- storage utilization. + + + ibmappnMemorySize OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Size of the shared storage segment, as obtained + by storage management from the underlying operating + system." + + ::= { ibmappnMemoryUse 1 } + + ibmappnMemoryUsed OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of bytes in the segment that are currently + allocated to process." + + ::= { ibmappnMemoryUse 2 } + + ibmappnMemoryWarnThresh OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Allocation threshold beyond which storage + management considers the storage resources + to be constrained." + + ::= { ibmappnMemoryUse 3 } + + ibmappnMemoryCritThresh OBJECT-TYPE + + + +McKenzie & Cheng [Page 49] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Allocation threshold beyond which storage + management considers the storage resources + to be critically constrained." + + ::= { ibmappnMemoryUse 4 } + + + -- ************************************************************** + -- The following are Counters maintained by the APPN CS component that + -- relate to total overall XID activity. + ------------------------------------------------------------------------ + ibmappnNodeDefLsGoodXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current number of successfull XIDs that have occurred + on all defined link stations since the last time this + node was initialized." + + ::= { ibmappnXidInformation 1 } + + ibmappnNodeDefLsBadXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current number of unsuccessfull XIDs that have + occurred on all defined link stations since the last + time this node was initialized." + + ::= { ibmappnXidInformation 2 } + + ibmappnNodeDynLsGoodXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current number of successfull XIDs that have + occurred on all dynamic link stations since the last + time this node was initialized." + + ::= { ibmappnXidInformation 3 } + + + + +McKenzie & Cheng [Page 50] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNodeDynLsBadXids OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current number of unsuccessfull XIDs that have + occurred on all dynamic link stations since the last + time this node was initialized." + + ::= { ibmappnXidInformation 4 } + + + + -- ************** The APPN Topology Group *********************** + + ibmappnNn OBJECT IDENTIFIER ::= { ibmappn 2 } + ibmappnNnTopo OBJECT IDENTIFIER ::= { ibmappnNn 1 } + ibmappnNnTopology OBJECT IDENTIFIER ::= { ibmappnNn 3 } + + + -- This group will be used to represent the entire APPN network + -- topology, including Network nodes, virtual nodes and + -- all TGs associated with these nodes. + -- + + -- Network nodes + -- The APPN topology database consists of information about every + -- APPN network node. This information is learned over time + -- as each network node exchanges topology information with + -- each of its adjacent network nodes. The database consists + -- of information about each node and all of the transmissions + -- groups used by each node. + + -- Virtual nodes + -- Information about virtual nodes (connection networks) is treated + -- the same as information about network node + -- and is replicated at each network node. + -- The node name is the only meaningful information. The other + -- node objects use default values. Each node that has defined + -- a TG with this virtual node as the destination also defines a + -- TG on this virtual node. There is a TG record for each node + -- that uses this virtual node. + -- + -- + -- The APPN node table represents the APPN topology + -- database with the APPN CP fully-qualified name + -- being used as the index to this table. + -- This entire table could be retrieved using the GET NEXT command, + + + +McKenzie & Cheng [Page 51] + +RFC 1593 SNA APPN Node MIB March 1994 + + + -- however, due to the dynamics of APPN, nodes could come and + -- go and status could change as the table is being + -- retrieved. Although in most cases the data retrieved will be valid, + -- missing and invalid status could cause problems for + -- a management application that was graphically displaying + -- this data. + -- This potential problem can be eliminated by + -- retrieving the FRSN before and after completion + -- of retrieval of the APPN topology table. + -- If the FRSN has changed, then repeat the + -- retrieval of the entire topology table + -- until the FRSN remains unchanged. + -- Object 'appnNnFrsn' represents the last + -- change or update to this node's topology + -- database. + -- + -- + -- The format of the actual database is as follows: + -- + -- Node table (entry for each node in network) + -- TG table (entry for each TG owned by node) + -- + -- Due to SNMP ASN.1 limitations, we cannot represent + -- the TG table within the node table. We define + -- separate tables for nodes and TGs, adding the node + -- name to each TG entry to provide a means of + -- correlating each TG with its originating node. + + + + ibmappnNnTopoMaxNodes OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum number of nodes allowed in the APPN topology + database. This administratively assigned value must be + equal to or greater than the maximum total number of end + nodes and network nodes. + If the number of nodes exceeds this value, APPN will issue + an Alert and the node can no longer participate as a network + node." + + ::= { ibmappnNnTopo 1 } + + ibmappnNnTopoCurNumNodes OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + + + +McKenzie & Cheng [Page 52] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Current number of nodes in this node's topology database. + If this value exceeds the maximum number of nodes allowed + (NnTopoMaxNodes), APPN alert CPDB002 is + issued." + + ::= { ibmappnNnTopo 2 } + + ibmappnNnTopoInTdus OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of TDUs received from + all adjacent NN since last initialization." + + ::= { ibmappnNnTopo 3 } + + ibmappnNnTopoOutTdus OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of TDUs built by this node to be sent to + all adjacent NN since last initialization." + + ::= { ibmappnNnTopo 4 } + + ibmappnNnTopoNodeLowRsns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology node updates received by this + node with a RSN less than the current RSN. Both even and + odd RSN are included in this count. + These TDUs are not errors, but result when TDUs are + broadcast to all adjacent network nodes. No update to + this node's topology database occurs, but this node will + send a TDU with it's higher RSN to the adjacent node that + sent this low RSN." + + ::= { ibmappnNnTopo 5 } + + ibmappnNnTopoNodeEqualRsns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + + + +McKenzie & Cheng [Page 53] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Total number of topology node updates received by this + node with a RSN equal to the current RSN. Both even and + odd RSN are included in this count. + These TDUs are not errors, but result when TDUs are + broadcast to all adjacent network nodes. No update to + this node's topology database occurs." + + ::= { ibmappnNnTopo 6 } + + ibmappnNnTopoNodeGoodHighRsns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology node updates received by this + node with a RSN greater than the current RSN. + This results in updating this nodes topology and + broadcasting a TDU to all adjacent network nodes. It is + not required to send a TDU to the sender of this update + because that node already has the update." + + ::= { ibmappnNnTopo 7 } + + + + ibmappnNnTopoNodeBadHighRsns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology node updates received by this + node with an odd RSN greater than the current RSN. + These updates represent a topology inconsistency detected + by one of the APPN network nodes. + This results in updating this nodes topology and broadcasting + a TDU to all adjacent network nodes." + + ::= { ibmappnNnTopo 8 } + + + ibmappnNnTopoNodeStateUpdates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology Node records built as a result + + + +McKenzie & Cheng [Page 54] + +RFC 1593 SNA APPN Node MIB March 1994 + + + of internally detected node state changes that affect APPN + topology and routing. Updates are sent via TDUs to all + adjacent network nodes." + + ::= { ibmappnNnTopo 9 } + + ibmappnNnTopoNodeErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology node records inconsistencies + detected by this node. This occurs when this node attempts + to update its topology database and detects a data + inconsistency. This node will create a TDU with the + current RSN incremented to the next odd number and + broadcast it to all adjacent NNs." + + ::= { ibmappnNnTopo 10 } + + ibmappnNnTopoNodeTimerUpdates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology node records built for this + node's resource due to timer updates. Updates are sent via + TDUs to all adjacent network nodes. These updates insure + other network nodes do not delete this node's resources + from their topology database." + + ::= { ibmappnNnTopo 11 } + + ibmappnNnTopoNodePurges OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology node records purged from this + node's topology database. This occurs when a node has not + been updated in a specified amount of time. The owning + node is responsible for broadcasting updates for its + resource that it wants kept in the network topology." + + ::= { ibmappnNnTopo 12 } + + + ibmappnNnTopoTgLowRsns OBJECT-TYPE + + + +McKenzie & Cheng [Page 55] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology TG updates received by this + node with a RSN less than the current RSN. Both even and + odd RSN are included in this count. + These TDUs are not errors, but result when TDUs are + broadcast to all adjacent network nodes. No update to + this node's topology database occurs, but this node will + send a TDU with it's higher RSN to the sender of the low + RSN." + + ::= { ibmappnNnTopo 13 } + + ibmappnNnTopoTgEqualRsns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology TG updates received by this + node with a RSN equal to the current RSN. Both even and + odd RSN are included in this count. + These TDUs are not errors, but result when TDUs are + broadcast to all adjacent network nodes. No update to + this node's topology database occurs." + + ::= { ibmappnNnTopo 14 } + + ibmappnNnTopoTgGoodHighRsns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology TG updates received by this + node with a RSN greater than the current RSN. + This results in updating this nodes topology and + broadcasting the update to all adjacent network nodes." + + ::= { ibmappnNnTopo 15 } + + + ibmappnNnTopoTgBadHighRsns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology TG updates received by this + + + +McKenzie & Cheng [Page 56] + +RFC 1593 SNA APPN Node MIB March 1994 + + + node with an odd RSN greater than the current RSN. + These updates represent a topology inconsistency detected + by one of the APPN network nodes. + This results in updating this nodes topology and + broadcasting a TDU to all adjacent network nodes." + + ::= { ibmappnNnTopo 16 } + + + ibmappnNnTopoTgStateUpdates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology TG records built as a result + of internally detected node state changes that affect APPN + topology and routing. Updates are sent via TDUs to all + adjacent network nodes." + + ::= { ibmappnNnTopo 17 } + + ibmappnNnTopoTgErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology TG records inconsistencies + detected by this node. This occurs when this node + attempts to update its topology database and detects a + data inconsistency. This node will create a TDU with + the current RSN incremented to the next odd number and + broadcast it to all adjacent NNs." + + ::= { ibmappnNnTopo 18 } + + ibmappnNnTopoTgTimerUpdates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology TG records built for this + node's resource due to timer updates. Updates are sent via + TDUs to all adjacent network nodes. These updates insure + other network nodes do not delete this node's resources + from their topology database." + + ::= { ibmappnNnTopo 19 } + + + + +McKenzie & Cheng [Page 57] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnTopoTgPurges OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of topology TG records purged from this + node's topology database. This occurs when a TG has not + been updated in a specified amount of time. The owning + node is responsible for broadcasting updates for its + resource that it wants to keep in the network topology." + + ::= { ibmappnNnTopo 20 } + + + ibmappnNnTopoTotalRouteCalcs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of routes calculated for all class of services + since the last initialization." + + ::= { ibmappnNnTopo 21 } + + ibmappnNnTopoTotalRouteRejs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of route requests for all class of services that + could not be calculated since last initialization." + + ::= { ibmappnNnTopo 22 } + + + ibmappnNnTopoRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNnTopoRouteEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table containing an entry for every Class of Service + that it has calculated a route for." + + ::= { ibmappnNnTopo 23 } + + + + ibmappnNnTopoRouteEntry OBJECT-TYPE + + + +McKenzie & Cheng [Page 58] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX IbmappnNnTopoRouteEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The Class of Service name is the index for this table." + + INDEX + {ibmappnNnTopoRouteCos} + + ::= { ibmappnNnTopoRouteTable 1 } + + IbmappnNnTopoRouteEntry ::= SEQUENCE { + ibmappnNnTopoRouteCos DisplayString, + ibmappnNnTopoRouteTrees Counter, + ibmappnNnTopoRouteCalcs Counter, + ibmappnNnTopoRouteRejs Counter + } + + + ibmappnNnTopoRouteCos OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Class of Service for the route." + + ::= { ibmappnNnTopoRouteEntry 1 } + + ibmappnNnTopoRouteTrees OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of routes tree caches built for this Class of + Service since the last initialization." + + ::= { ibmappnNnTopoRouteEntry 2 } + + + ibmappnNnTopoRouteCalcs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of routes calculated since last initialization." + + ::= { ibmappnNnTopoRouteEntry 3 } + + + + +McKenzie & Cheng [Page 59] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnTopoRouteRejs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of route requests that could not + be calculated since last initialization." + + ::= { ibmappnNnTopoRouteEntry 4 } + + + --Adjacent node table + -- Node name (only applies to adjacent nodes) + -- Number of out of sequence TDUs + -- Status of CP-CP sessions (ConWinner/ConLoser) + -- Last FRSN sent + -- Last FRSN received + + + ibmappnNnAdjNodeTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNnAdjNodeEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table containing an entry for every node. The information + kept in this table is the last FRSN sent and received, + the status of the CP-CP sessions, and a gauge that + indicates the number of outstanding TDUs." + + ::= { ibmappnNn 2 } + + + ibmappnNnAdjNodeEntry OBJECT-TYPE + SYNTAX IbmappnNnAdjNodeEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The adjacent node name is the index for this table." + + INDEX + {ibmappnNnAdjNodeAdjName} + + ::= { ibmappnNnAdjNodeTable 1 } + + IbmappnNnAdjNodeEntry ::= SEQUENCE { + ibmappnNnAdjNodeAdjName DisplayString, + ibmappnNnAdjNodeCpCpSessStatus INTEGER, + ibmappnNnAdjNodeOutOfSeqTdus Gauge, + + + +McKenzie & Cheng [Page 60] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnAdjNodeLastFrsnSent INTEGER, + ibmappnNnAdjNodeLastFrsnRcvd INTEGER + } + + ibmappnNnAdjNodeAdjName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An administratively-assigned fully-qualified + name of this node's adjacent network node." + + ::= { ibmappnNnAdjNodeEntry 1 } + + ibmappnNnAdjNodeCpCpSessStatus OBJECT-TYPE + SYNTAX INTEGER { + active(1), + conLoserActive(2), + conWinnerActive(3), + inactive(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates the state of CP-CP sessions between this node + and adjacent network and end nodes. Incative indicates no + CP-CP sessions exists between this node and the adjacent + node. Active indicates CP-CP sessons are active using both + the ConWinner and ConLoser sessions. The session initiated + by this node is refered to as the ConWinner session and is + used by this node to send to the adjacent node. The + ConLoserr session is initiated by the adjacent node and + is used by this node to receive from the adjacent node." + + ::= { ibmappnNnAdjNodeEntry 2 } + + ibmappnNnAdjNodeOutOfSeqTdus OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of out of sequence Topology Database + Updates (TDUs). In a quiesced state, this value is + zero. In normal operation, the value varies + depending on the network environment." + + ::= { ibmappnNnAdjNodeEntry 3 } + + + + +McKenzie & Cheng [Page 61] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnAdjNodeLastFrsnSent OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Flow reduction sequence numbers (FRSNs) are associated + with Topology Database Updates (TDUs) and are unique + only within each APPN network node. A TDU can be + associated with multiple APPN resources. This FRSN + indicates the last TDU sent to this adjacent node." + + ::= { ibmappnNnAdjNodeEntry 4 } + + ibmappnNnAdjNodeLastFrsnRcvd OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Flow reduction sequence numbers (FRSNs) are associated + with Topology Database Updates (TDUs) and are unique + only within each APPN network node. A TDU can be + associated with multiple APPN resources. This FRSN + indicates the last TDU received from this adjacent node." + + ::= { ibmappnNnAdjNodeEntry 5 } + + + --APPN Node Topology table + + -- This table describes every known APPN Network node + -- and Virtual node. + + + ibmappnNnTopologyTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNnTopologyEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Portion of the APPN routing table + that describes all of the APPN network nodes + and virtual nodes known to this node." + + ::= { ibmappnNnTopology 1 } + + ibmappnNnTopologyEntry OBJECT-TYPE + SYNTAX IbmappnNnTopologyEntry + ACCESS not-accessible + STATUS mandatory + + + +McKenzie & Cheng [Page 62] + +RFC 1593 SNA APPN Node MIB March 1994 + + + DESCRIPTION + "The fully-qualified node name is used to + index this table." + + INDEX + {ibmappnNnNodeName} + + ::= { ibmappnNnTopologyTable 1 } + + IbmappnNnTopologyEntry ::= SEQUENCE { + + ibmappnNnNodeName DisplayString, + ibmappnNnNodeFrsn INTEGER, + ibmappnNnNodeEntryTimeLeft INTEGER, + ibmappnNnNodeType INTEGER, + + ibmappnNnNodeRsn INTEGER, + ibmappnNnNodeRouteAddResist INTEGER, + ibmappnNnNodeCongested INTEGER, + ibmappnNnNodeIsrDepleted INTEGER, + ibmappnNnNodeEndptDepleted INTEGER, + ibmappnNnNodeQuiescing INTEGER, + ibmappnNnNodeGateway INTEGER, + ibmappnNnNodeCentralDirectory INTEGER, + ibmappnNnNodeIsr INTEGER, + ibmappnNnNodeChainSupport INTEGER + } + + ibmappnNnNodeName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned network name that is locally + defined at each network node in the format NETID.CPNAME." + + ::= { ibmappnNnTopologyEntry 1 } + + ibmappnNnNodeFrsn OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Flow reduction sequence numbers (FRSNs) are associated + with Topology Database Updates (TDUs) and are unique + only within each APPN network node. A TDU can be + associated with multiple APPN resources. This FRSN + indicates the last time this resource was updated at + + + +McKenzie & Cheng [Page 63] + +RFC 1593 SNA APPN Node MIB March 1994 + + + this node." + + ::= { ibmappnNnTopologyEntry 2 } + + ibmappnNnNodeEntryTimeLeft OBJECT-TYPE + SYNTAX INTEGER (0..31) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of days before deletion of this + network node entry. Range is 0-31." + + ::= { ibmappnNnTopologyEntry 3 } + + ibmappnNnNodeType OBJECT-TYPE + SYNTAX INTEGER { + networknode(1), + virtualnode(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of APPN node." + + ::= { ibmappnNnTopologyEntry 4 } + + ibmappnNnNodeRsn OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Resource sequence number that is assigned and + controlled by the network node that owns this + resource. This is always an even 32-bit number + unless an error has occurred." + + ::= { ibmappnNnTopologyEntry 5 } + + ibmappnNnNodeRouteAddResist OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Route addition resistance + indicates the relative desirability + of using this node for intermediate session traffic. + The value, which can be any integer 0-255, + is used in route computation. The lower the value, + + + +McKenzie & Cheng [Page 64] + +RFC 1593 SNA APPN Node MIB March 1994 + + + the more desirable the node is for intermediate routing." + + ::= { ibmappnNnTopologyEntry 6 } + + ibmappnNnNodeCongested OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node is congested. + This node is not be included in route selection + by other nodes when this congestion exists." + + ::= { ibmappnNnTopologyEntry 7 } + + ibmappnNnNodeIsrDepleted OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether intermediate session + routing resources are depleted. This node is + not included in intermediate route selection + by other nodes when resources are depleted." + + ::= { ibmappnNnTopologyEntry 8 } + + ibmappnNnNodeEndptDepleted OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether session endpoint resources are depleted." + + ::= { ibmappnNnTopologyEntry 9 } + + ibmappnNnNodeQuiescing OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node is quiescing. + This node is not included in route selection + by other nodes when the node is quiescing." + + ::= { ibmappnNnTopologyEntry 10 } + + ibmappnNnNodeGateway OBJECT-TYPE + + + +McKenzie & Cheng [Page 65] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node provide gateway functions." + + ::= { ibmappnNnTopologyEntry 11 } + + ibmappnNnNodeCentralDirectory OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node is central directory." + + ::= { ibmappnNnTopologyEntry 12 } + + ibmappnNnNodeIsr OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node supports intermediate session + routing (ISR)." + + ::= { ibmappnNnTopologyEntry 13 } + + ibmappnNnNodeChainSupport OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node supports chaining." + + ::= { ibmappnNnTopologyEntry 14 } + + + --APPN transmission group (TG) table + + -- This table describes the TGs associated with + -- the APPN network nodes. + -- The originating node is repeated here to provide a + -- means of correlating the TGs with the nodes. + + + ibmappnNnTgTopologyTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNnTgTopologyEntry + ACCESS not-accessible + + + +McKenzie & Cheng [Page 66] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Portion of the APPN topology database + that describes all of the APPN transmissions groups + used by the APPN network nodes." + + ::= { ibmappnNnTopology 2 } + + ibmappnNnTgTopologyEntry OBJECT-TYPE + SYNTAX IbmappnNnTgTopologyEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table requires three indexes to provide a + unique index. The indexes are the owning or originating + CPname, the destination CPname, and the TG number." + + INDEX + {ibmappnNnTgOwner, + ibmappnNnTgDest, + ibmappnNnTgNum} + + ::= { ibmappnNnTgTopologyTable 1 } + + IbmappnNnTgTopologyEntry ::= SEQUENCE { + + ibmappnNnTgOwner DisplayString, + ibmappnNnTgDest DisplayString, + ibmappnNnTgNum INTEGER, + ibmappnNnTgFrsn INTEGER, + ibmappnNnTgEntryTimeLeft INTEGER, + + ibmappnNnTgDestVirtual INTEGER, + ibmappnNnTgDlcData OCTET STRING, + + ibmappnNnTgRsn INTEGER, + ibmappnNnTgOperational INTEGER, + ibmappnNnTgQuiescing INTEGER, + ibmappnNnTgCpCpSession INTEGER, + ibmappnNnTgEffCap INTEGER, + ibmappnNnTgConnCost INTEGER, + ibmappnNnTgByteCost INTEGER, + ibmappnNnTgSecurity INTEGER, + ibmappnNnTgDelay INTEGER, + ibmappnNnTgModemClass INTEGER, + ibmappnNnTgUsr1 INTEGER, + ibmappnNnTgUsr2 INTEGER, + ibmappnNnTgUsr3 INTEGER} + + + +McKenzie & Cheng [Page 67] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnTgOwner OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for the + originating node for this TG. The format + is NETID.CPNAME and is the same name + specified in the node table." + + ::= { ibmappnNnTgTopologyEntry 1 } + + ibmappnNnTgDest OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned fully-qualified + network name for the destination node for this TG." + + ::= { ibmappnNnTgTopologyEntry 2 } + + ibmappnNnTgNum OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number associated with this + transmission group. Range is 0-255." + + ::= { ibmappnNnTgTopologyEntry 3 } + + ibmappnNnTgFrsn OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Flow reduction sequence numbers (FRSNs) are associated + with Topology Database Updates (TDUs) and are unique + only within each APPN network node. A TDU can be + associated with multiple APPN resources. This FRSN + indicates the last time this resource was updated at + this node." + + ::= { ibmappnNnTgTopologyEntry 4 } + + ibmappnNnTgEntryTimeLeft OBJECT-TYPE + SYNTAX INTEGER (0..31) + + + +McKenzie & Cheng [Page 68] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of days before deletion of this + network node TG entry. Range is 0-31." + + ::= { ibmappnNnTgTopologyEntry 5 } + + ibmappnNnTgDestVirtual OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the destination node is + a virtual node." + + ::= { ibmappnNnTgTopologyEntry 6 } + + ibmappnNnTgDlcData OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..9)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "DLC specific data related to the link connection + network. + Token-Ring - MAC/SAP + X.25 Switched - dial digits + X.21 Switched - dial digits + Circuit Swtch - dial digits" + + ::= { ibmappnNnTgTopologyEntry 7 } + + ibmappnNnTgRsn OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current owning node's resource sequence number + for this resource." + + ::= { ibmappnNnTgTopologyEntry 8 } + + ibmappnNnTgOperational OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the transmission group + + + +McKenzie & Cheng [Page 69] + +RFC 1593 SNA APPN Node MIB March 1994 + + + is operational." + + ::= { ibmappnNnTgTopologyEntry 9 } + + ibmappnNnTgQuiescing OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the transmission group + is quiescing." + + ::= { ibmappnNnTgTopologyEntry 10 } + + ibmappnNnTgCpCpSession OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether CP-CP sessions are supported on this TG." + + ::= { ibmappnNnTgTopologyEntry 11 } + + + ibmappnNnTgEffCap OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The effective capacity is an integer value that indicates + the kilo bits per second. + It is derived from the link bandwidth and maximum load + factor with the range of 0 thru 603,979,776. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyEntry 12 } + + ibmappnNnTgConnCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Cost per connect time: a value representing + the relative cost per unit of time to use + the TG. Range is from 0, which means no cost, + to 255, which indicates maximum cost. + This is an administratively assigned value associated + + + +McKenzie & Cheng [Page 70] + +RFC 1593 SNA APPN Node MIB March 1994 + + + with this TG." + + + ::= { ibmappnNnTgTopologyEntry 13 } + + ibmappnNnTgByteCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Relative cost of transmitting a byte over this link. + Range is from 0 (lowest cost) to 255. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyEntry 14 } + + ibmappnNnTgSecurity OBJECT-TYPE + SYNTAX INTEGER { + nonsecure(1), --X'01' + publicSwitchedNetwork(32), --X'20' + undergroundCable(64), --X'40' + secureConduit(96), --X'60' + guardedConduit(128), --X'80' + encrypted(160), --X'A0' + guardedRadiation(192) --X'C0' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The security is represented as an integer with a range of + 1 thru 255 with the most common values enumerated as + defined above. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyEntry 15 } + + ibmappnNnTgDelay OBJECT-TYPE + SYNTAX INTEGER { + minimum(0), --X'00' + negligible(384), --X'4C' + terrestrial(9216), --X'71' + packet(147456), --X'91' + long(294912), --X'99' + maximum(2013265920) --X'FF' + } + ACCESS read-only + + + +McKenzie & Cheng [Page 71] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Relative amount of time that it takes for a signal to + travel the length of the logical link. This time is + represented in micro seconds, with some of the more + common values enumerated. + This is an administratively assigned value associated + with this TG." + + + ::= { ibmappnNnTgTopologyEntry 16 } + + ibmappnNnTgModemClass OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is used to have multiple images for a + connection network. For a connection network + it is the same as in the TG vector; for + a non-connection network it is X'00'." + + ::= { ibmappnNnTgTopologyEntry 17 } + + ibmappnNnTgUsr1 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "First user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyEntry 18 } + + ibmappnNnTgUsr2 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Second user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyEntry 19 } + + + + +McKenzie & Cheng [Page 72] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnTgUsr3 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Third user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyEntry 20 } + + + --APPN Node Topology table (using FRSN as index) + + -- This table describes every known APPN Network node + -- and Virtual node. + + + ibmappnNnTopologyFRTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNnTopologyFREntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Portion of the APPN routing table + that describes all of the APPN network nodes + and virtual nodes known to this node." + + ::= { ibmappnNnTopology 3 } + + ibmappnNnTopologyFREntry OBJECT-TYPE + SYNTAX IbmappnNnTopologyFREntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is indexed by two columns: + FRSN, followed by fully-qualified node name." + + INDEX + {ibmappnNnNodeFRFrsn, + ibmappnNnNodeFRName} + + ::= { ibmappnNnTopologyFRTable 1 } + + IbmappnNnTopologyFREntry ::= SEQUENCE { + ibmappnNnNodeFRName DisplayString, + ibmappnNnNodeFRFrsn INTEGER, + ibmappnNnNodeFREntryTimeLeft INTEGER, + + + +McKenzie & Cheng [Page 73] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnNodeFRType INTEGER, + + ibmappnNnNodeFRRsn INTEGER, + ibmappnNnNodeFRRouteAddResist INTEGER, + ibmappnNnNodeFRCongested INTEGER, + ibmappnNnNodeFRIsrDepleted INTEGER, + ibmappnNnNodeFREndptDepleted INTEGER, + ibmappnNnNodeFRQuiescing INTEGER, + ibmappnNnNodeFRGateway INTEGER, + ibmappnNnNodeFRCentralDirectory INTEGER, + ibmappnNnNodeFRIsr INTEGER, + ibmappnNnNodeFRChainSupport INTEGER + } + + ibmappnNnNodeFRName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned network name that is locally + defined at each network node in the format NETID.CPNAME." + + ::= { ibmappnNnTopologyFREntry 1 } + + ibmappnNnNodeFRFrsn OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Flow reduction sequence numbers (FRSNs) are associated + with Topology Database Updates (TDUs) and are unique + only within each APPN network node. A TDU can be + associated with multiple APPN resources. This FRSN + indicates the last time this resource was updated at + this node." + + ::= { ibmappnNnTopologyFREntry 2 } + + ibmappnNnNodeFREntryTimeLeft OBJECT-TYPE + SYNTAX INTEGER (0..31) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of days before deletion of this + network node entry. Range is 0-31." + + ::= { ibmappnNnTopologyFREntry 3 } + + + + +McKenzie & Cheng [Page 74] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnNodeFRType OBJECT-TYPE + SYNTAX INTEGER { + networknode(1), + virtualnode(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of APPN node." + + ::= { ibmappnNnTopologyFREntry 4 } + + ibmappnNnNodeFRRsn OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Resource sequence number that is assigned and + controlled by the network node that owns this + resource. This is always an even 32-bit number + unless an error has occurred." + + ::= { ibmappnNnTopologyFREntry 5 } + + ibmappnNnNodeFRRouteAddResist OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Route addition resistance + indicates the relative desirability + of using this node for intermediate session traffic. + The value, which can be any integer 0-255, + is used in route computation. The lower the value, + the more desirable the node is for intermediate routing." + + ::= { ibmappnNnTopologyFREntry 6 } + + ibmappnNnNodeFRCongested OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node is congested. + This node is not be included in route selection + by other nodes when this congestion exists." + + ::= { ibmappnNnTopologyFREntry 7 } + + + +McKenzie & Cheng [Page 75] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnNodeFRIsrDepleted OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether intermediate session + routing resources are depleted. This node is + not included in intermediate route selection + by other nodes when resources are depleted." + + ::= { ibmappnNnTopologyFREntry 8 } + + ibmappnNnNodeFREndptDepleted OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether session endpoint resources are depleted." + + ::= { ibmappnNnTopologyFREntry 9 } + + ibmappnNnNodeFRQuiescing OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node is quiescing. + This node is not included in route selection + by other nodes when the node is quiescing." + + ::= { ibmappnNnTopologyFREntry 10 } + + ibmappnNnNodeFRGateway OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node provide gateway functions." + + ::= { ibmappnNnTopologyFREntry 11 } + + ibmappnNnNodeFRCentralDirectory OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node is central directory." + ::= { ibmappnNnTopologyFREntry 12 } + + + +McKenzie & Cheng [Page 76] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnNodeFRIsr OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node supports intermediate session + routing (ISR)." + + ::= { ibmappnNnTopologyFREntry 13 } + + ibmappnNnNodeFRChainSupport OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node supports chaining." + + ::= { ibmappnNnTopologyFREntry 14 } + + + --APPN transmission group (TG) table + + -- This table describes the TGs associated with + -- the APPN network nodes. + -- The originating node is repeated here to provide a + -- means of correlating the TGs with the nodes. + + + ibmappnNnTgTopologyFRTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnNnTgTopologyFREntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Portion of the APPN topology database + that describes all of the APPN transmissions groups + used by the APPN network nodes." + + ::= { ibmappnNnTopology 4 } + + ibmappnNnTgTopologyFREntry OBJECT-TYPE + SYNTAX IbmappnNnTgTopologyFREntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is indexed by four columns: + FRSN, TG owner fully-qualified node name, + TG destination fully-qualified node name, and TG number." + INDEX + + + +McKenzie & Cheng [Page 77] + +RFC 1593 SNA APPN Node MIB March 1994 + + + {ibmappnNnTgFRFrsn, + ibmappnNnTgFROwner, + ibmappnNnTgFRDest, + ibmappnNnTgFRNum} + + ::= { ibmappnNnTgTopologyFRTable 1 } + + IbmappnNnTgTopologyFREntry ::= SEQUENCE { + + ibmappnNnTgFROwner DisplayString, + ibmappnNnTgFRDest DisplayString, + ibmappnNnTgFRNum INTEGER, + ibmappnNnTgFRFrsn INTEGER, + ibmappnNnTgFREntryTimeLeft INTEGER, + + ibmappnNnTgFRDestVirtual INTEGER, + ibmappnNnTgFRDlcData OCTET STRING, + + ibmappnNnTgFRRsn INTEGER, + ibmappnNnTgFROperational INTEGER, + ibmappnNnTgFRQuiescing INTEGER, + ibmappnNnTgFRCpCpSession INTEGER, + ibmappnNnTgFREffCap INTEGER, + ibmappnNnTgFRConnCost INTEGER, + ibmappnNnTgFRByteCost INTEGER, + ibmappnNnTgFRSecurity INTEGER, + ibmappnNnTgFRDelay INTEGER, + ibmappnNnTgFRModemClass INTEGER, + ibmappnNnTgFRUsr1 INTEGER, + ibmappnNnTgFRUsr2 INTEGER, + ibmappnNnTgFRUsr3 INTEGER} + + + ibmappnNnTgFROwner OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for the + originating node for this TG. The format + is NETID.CPNAME and is the same name + specified in the node table." + + ::= { ibmappnNnTgTopologyFREntry 1 } + + ibmappnNnTgFRDest OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + + + +McKenzie & Cheng [Page 78] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Administratively-assigned fully-qualified + network name for the destination node for this TG." + + ::= { ibmappnNnTgTopologyFREntry 2 } + + ibmappnNnTgFRNum OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number associated with this + transmission group. Range is 0-255." + + ::= { ibmappnNnTgTopologyFREntry 3 } + + ibmappnNnTgFRFrsn OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Flow reduction sequence numbers (FRSNs) are associated + with Topology Database Updates (TDUs) and are unique + only within each APPN network node. A TDU can be + associated with multiple APPN resources. This FRSN + indicates the last time this resource was updated at + this node." + + ::= { ibmappnNnTgTopologyFREntry 4 } + + ibmappnNnTgFREntryTimeLeft OBJECT-TYPE + SYNTAX INTEGER (0..31) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of days before deletion of this + network node TG entry. Range is 0-31." + + ::= { ibmappnNnTgTopologyFREntry 5 } + + ibmappnNnTgFRDestVirtual OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the destination node is + a virtual node." + + + +McKenzie & Cheng [Page 79] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnNnTgTopologyFREntry 6 } + + ibmappnNnTgFRDlcData OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..9)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "DLC specific data related to the link connection + network. + Token-Ring - MAC/SAP + X.25 Switched - dial digits + X.21 Switched - dial digits + Circuit Swtch - dial digits" + + ::= { ibmappnNnTgTopologyFREntry 7 } + + ibmappnNnTgFRRsn OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current owning node's resource sequence number + for this resource." + + ::= { ibmappnNnTgTopologyFREntry 8 } + + ibmappnNnTgFROperational OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the transmission group + is operational." + + ::= { ibmappnNnTgTopologyFREntry 9 } + + ibmappnNnTgFRQuiescing OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the transmission group + is quiescing." + + ::= { ibmappnNnTgTopologyFREntry 10 } + + ibmappnNnTgFRCpCpSession OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + + + +McKenzie & Cheng [Page 80] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether CP-CP sessions are supported on this TG." + + ::= { ibmappnNnTgTopologyFREntry 11 } + + ibmappnNnTgFREffCap OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The effective capacity is an integer value that indicates + the kilo bits per second. + It is derived from the link bandwidth and maximum load + factor with the range of 0 thru 603,979,776. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyFREntry 12 } + + ibmappnNnTgFRConnCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Cost per connect time: a value representing + the relative cost per unit of time to use + the TG. Range is from 0, which means no cost, + to 255, which indicates maximum cost. + This is an administratively assigned value associated + with this TG." + + + ::= { ibmappnNnTgTopologyFREntry 13 } + + ibmappnNnTgFRByteCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Relative cost of transmitting a byte over this link. + Range is from 0 (lowest cost) to 255. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyFREntry 14 } + + + + +McKenzie & Cheng [Page 81] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnNnTgFRSecurity OBJECT-TYPE + SYNTAX INTEGER { + nonsecure(1), --X'01' + publicSwitchedNetwork(32), --X'20' + undergroundCable(64), --X'40' + secureConduit(96), --X'60' + guardedConduit(128), --X'80' + encrypted(160), --X'A0' + guardedRadiation(192) --X'C0' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The security is represented as an integer with a range of + 1 thru 255 with the most common values enumerated as + defined above. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyFREntry 15 } + + ibmappnNnTgFRDelay OBJECT-TYPE + SYNTAX INTEGER { + minimum(0), --X'00' + negligible(384), --X'4C' + terrestrial(9216), --X'71' + packet(147456), --X'91' + long(294912), --X'99' + maximum(2013265920) --X'FF' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Relative amount of time that it takes for a signal to + travel the length of the logical link. This time is + represented in micro seconds, with some of the more + common values enumerated. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyFREntry 16 } + + ibmappnNnTgFRModemClass OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is used to have multiple images for a + + + +McKenzie & Cheng [Page 82] + +RFC 1593 SNA APPN Node MIB March 1994 + + + connection network. For a connection network + it is the same as in the TG vector; for + a non-connection network it is X'00'." + + ::= { ibmappnNnTgTopologyFREntry 17 } + + ibmappnNnTgFRUsr1 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "First user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyFREntry 18 } + + ibmappnNnTgFRUsr2 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Second user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyFREntry 19 } + + ibmappnNnTgFRUsr3 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Third user-defined TG characteristic for this TG with + a range of 0-255. + This is an administratively assigned value associated + with this TG." + + ::= { ibmappnNnTgTopologyFREntry 20 } + + + -- ************** The APPN Local Topology Group ***************** + + ibmappnLocalTopology OBJECT IDENTIFIER ::= { ibmappn 3 } + ibmappnLocalThisNode OBJECT IDENTIFIER ::= { ibmappnLocalTopology 1 } + ibmappnLocalGeneral OBJECT IDENTIFIER ::= { ibmappnLocalThisNode 1} + + + +McKenzie & Cheng [Page 83] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnLocalNnSpecific OBJECT IDENTIFIER ::= { ibmappnLocalThisNode 2} + ibmappnLocalTg OBJECT IDENTIFIER ::= { ibmappnLocalThisNode 3} + ibmappnLocalEnTopology OBJECT IDENTIFIER ::= { ibmappnLocalTopology 2 } + + -- The LocalEnNodeTable and LocalEnTgTable will replace these OIs + --ibmappnLocalEnNode OBJECT IDENTIFIER ::= { ibmappnLocalEnTopology 1} + --ibmappnLocalEnTg OBJECT IDENTIFIER ::= { ibmappnLocalEnTopology 2} + + + --This MIB Group represents the local topology + --maintained in both APPN end nodes and network nodes. + --Although the same control vectors are used for both network + --and local topology, many of the attributes only apply to network + --nodes. This MIB group defines the required objects for retrieval + --of information about this node and the objects that represent + --the local topology about end nodes. + -- + --This node could be either an network node or an end node. The + --definition must address both cases. + -- + --1 Information about this node + -- a General information about this node, both NN and ENs. + -- b Information about this node that applies only to NNs. + -- c TG table (repeated for each TG this node owns) + -- + --2 Information about the end nodes known to this network node + -- (THIS SECTION ONLY APPLIES TO NETWORK NODES) + -- a End node table (entry for each end node ) + -- b TG table (repeated for each TG owned by the end nodes) + -- + -- + + + + ---- + -- General information section + + ibmappnLocalNodeName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned fully-qualified name + for this node. Format is NETID.CPNAME." + + ::= { ibmappnLocalGeneral 1 } + + ibmappnLocalNodeType OBJECT-TYPE + + + +McKenzie & Cheng [Page 84] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX INTEGER { + networknode(1), + endnode(2), + len(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of APPN node." + + ::= { ibmappnLocalGeneral 2 } + + + -- Network node unique information + -- + + ibmappnLocalNnRsn OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Resource sequence number is assigned and + controlled by the network node that owns this + resource. This is always an even unsigned + number unless an error has occurred." + + ::= { ibmappnLocalNnSpecific 1 } + + ibmappnLocalNnRouteAddResist OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Route addition resistance + indicates the relative desirability + of using this node for intermediate session traffic. + The value, which can be any integer 0-255, + is used in route computation. The lower the value, + the more desirable the node is for intermediate routing." + + ::= { ibmappnLocalNnSpecific 2 } + + ibmappnLocalNnCongested OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether this node is congested. + + + +McKenzie & Cheng [Page 85] + +RFC 1593 SNA APPN Node MIB March 1994 + + + Other network nodes stop routing traffic to + this node while this flag is on." + + ::= { ibmappnLocalNnSpecific 3 } + + ibmappnLocalNnIsrDepleted OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicate whether intermediated session + routing resources are depleted. + Other network nodes stop routing traffic through + this node while this flag is on." + + ::= { ibmappnLocalNnSpecific 4 } + + ibmappnLocalNnEndptDepleted OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether session endpoint resources + are depleted." + + ::= { ibmappnLocalNnSpecific 5 } + + ibmappnLocalNnQuiescing OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node is quiescing." + + ::= { ibmappnLocalNnSpecific 6 } + + ibmappnLocalNnGateway OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node is a gateway." + + ::= { ibmappnLocalNnSpecific 7 } + + ibmappnLocalNnCentralDirectory OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + + + +McKenzie & Cheng [Page 86] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Indicates whether the node is a central directory." + + ::= { ibmappnLocalNnSpecific 8 } + + ibmappnLocalNnIsr OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node supports intermediate + session routing." + + ::= { ibmappnLocalNnSpecific 9 } + + ibmappnLocalNnChainSupport OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the node supports chaining." + + ::= { ibmappnLocalNnSpecific 10 } + + ibmappnLocalNnFrsn OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Flow reduction sequence numbers (FRSNs) are associated + with Topology Database Updates (TDUs) and are unique + only within each APPN network node. A TDU can be + associated with multiple APPN resources. This object + is the last FRSN sent in a topology update to + adjacent network nodes." + + ::= { ibmappnLocalNnSpecific 11 } + + + -- Local TG information + -- APPN Transmission Group (TG) Table + + -- This table describes the TGs associated with + -- this node only. + + ibmappnLocalTgTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnLocalTgEntry + + + +McKenzie & Cheng [Page 87] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "TG Table describes all of the TGs owned by this + node. The TG destination can be a virtual + node, network node, len, or end node." + + ::= { ibmappnLocalTg 1 } + + ibmappnLocalTgEntry OBJECT-TYPE + SYNTAX IbmappnLocalTgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is indexed by the destination CPname + and the TG number." + + INDEX + {ibmappnLocalTgDest, + ibmappnLocalTgNum} + + ::= { ibmappnLocalTgTable 1 } + + IbmappnLocalTgEntry ::= SEQUENCE { + + ibmappnLocalTgDest DisplayString, + ibmappnLocalTgNum INTEGER, + ibmappnLocalTgDestVirtual INTEGER, + ibmappnLocalTgDlcData OCTET STRING, + + ibmappnLocalTgRsn INTEGER, + ibmappnLocalTgQuiescing INTEGER, + ibmappnLocalTgOperational INTEGER, + ibmappnLocalTgCpCpSession INTEGER, + ibmappnLocalTgEffCap INTEGER, + ibmappnLocalTgConnCost INTEGER, + ibmappnLocalTgByteCost INTEGER, + ibmappnLocalTgSecurity INTEGER, + ibmappnLocalTgDelay INTEGER, + ibmappnLocalTgModemClass INTEGER, + ibmappnLocalTgUsr1 INTEGER, + ibmappnLocalTgUsr2 INTEGER, + ibmappnLocalTgUsr3 INTEGER + } + + ibmappnLocalTgDest OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + + + +McKenzie & Cheng [Page 88] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for the + destination node for this TG. + This is the fully-qualified network node + name." + + ::= { ibmappnLocalTgEntry 1 } + + ibmappnLocalTgNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number associated with this transmission group." + + ::= { ibmappnLocalTgEntry 2 } + + ibmappnLocalTgDestVirtual OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the destination node is + a Virtual node." + ::= { ibmappnLocalTgEntry 3 } + + ibmappnLocalTgDlcData OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..9)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "DLC specific data related to the link connection + network. + Token-Ring - MAC/SAP + X.25 Switched - dial digits + X.21 Switched - dial digits + Circuit Swtch - dial digits" + + ::= { ibmappnLocalTgEntry 4 } + + ibmappnLocalTgRsn OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The resource sequence number is assigned and + controlled by the network node that owns this + + + +McKenzie & Cheng [Page 89] + +RFC 1593 SNA APPN Node MIB March 1994 + + + resource. This is always an even unsigned + number unless an error has occurred." + + ::= { ibmappnLocalTgEntry 5 } + + ibmappnLocalTgQuiescing OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the Transmission Group + is quiescing." + + ::= { ibmappnLocalTgEntry 6 } + + ibmappnLocalTgOperational OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the Transmission Group + is operational." + + ::= { ibmappnLocalTgEntry 7 } + + ibmappnLocalTgCpCpSession OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the CP-CP Sessions are + supported on this TG." + + ::= { ibmappnLocalTgEntry 8 } + + ibmappnLocalTgEffCap OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The effective capacity is an integer value that indicates + the actual kilo bits per second. + It is derived from the link bandwidth and maximum load + factor with the range of 0 thru 603,979,776." + + ::= { ibmappnLocalTgEntry 9 } + + ibmappnLocalTgConnCost OBJECT-TYPE + + + +McKenzie & Cheng [Page 90] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Cost per connect time: a value representing + the relative cost per unit of time to use + the TG. Range is from 0, which means no cost, + to 255." + + ::= { ibmappnLocalTgEntry 10 } + + ibmappnLocalTgByteCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Relative cost of transmitting a byte over this link. + Range is from 0 (lowest cost) to 255." + + ::= { ibmappnLocalTgEntry 11 } + + ibmappnLocalTgSecurity OBJECT-TYPE + SYNTAX INTEGER { + nonsecure(1), --X'01' + publicSwitchedNetwork(32), --X'20' + undergroundCable(64), --X'40' + secureConduit(96), --X'60' + guardedConduit(128), --X'80' + encrypted(160), --X'A0' + guardedRadiation(192) --X'C0' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Security level for this TG." + + ::= { ibmappnLocalTgEntry 12 } + + ibmappnLocalTgDelay OBJECT-TYPE + SYNTAX INTEGER { + minimum(0), --X'00' + negligible(384), --X'4C' + terrestrial(9216), --X'71' + packet(147456), --X'91' + long(294912), --X'99' + maximum(2013265920) --X'FF' + } + ACCESS read-only + + + +McKenzie & Cheng [Page 91] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Relative amount of time that it takes for a signal to + travel the length of the logical link. This time is + represented in micro seconds, with some of the more + common values enumerated." + + ::= { ibmappnLocalTgEntry 13 } + + ibmappnLocalTgModemClass OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is used to have multiple images for a + connection network. For a connection network + it is the same as in the TG vector and for + a non-connection network it is zero." + + ::= { ibmappnLocalTgEntry 14 } + + ibmappnLocalTgUsr1 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Value of the first user-defined TG + characteristic for this TG. + Range is 0-255." + + ::= { ibmappnLocalTgEntry 15 } + + ibmappnLocalTgUsr2 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Value of the second user-defined TG + characteristic for this TG. + Range is 0-255." + + ::= { ibmappnLocalTgEntry 16 } + + ibmappnLocalTgUsr3 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + + + +McKenzie & Cheng [Page 92] + +RFC 1593 SNA APPN Node MIB March 1994 + + + "Value of the third user-defined TG + characteristic for this TG. + Range is 0-255." + + ::= { ibmappnLocalTgEntry 17 } + + + -- This section applies only to network nodes. + -- It contains end node topology information known to serving + -- network node. + -- The first table contains information about all end nodes + -- known to this node. + -- + -- The TG table contains information about all of the TGs owned + -- by these end nodes. + + + ibmappnLocalEnTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnLocalEnEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Portion of the APPN topology + database that describes the end + nodes known to this node." + + ::= { ibmappnLocalEnTopology 1 } + + ibmappnLocalEnEntry OBJECT-TYPE + SYNTAX IbmappnLocalEnEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is indexed by the end node CPname." + + INDEX + {ibmappnLocalEnName} + ::= { ibmappnLocalEnTable 1 } + + IbmappnLocalEnEntry ::= SEQUENCE { + + ibmappnLocalEnName DisplayString, + ibmappnLocalEnEntryTimeLeft INTEGER, + ibmappnLocalEnType INTEGER + } + + ibmappnLocalEnName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + + + +McKenzie & Cheng [Page 93] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned fully-qualified + name of end node in the format NETID.CPNAME." + + ::= { ibmappnLocalEnEntry 1 } + + ibmappnLocalEnEntryTimeLeft OBJECT-TYPE + SYNTAX INTEGER (0..31) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of days before deletion of this + end node entry. Range is 0-31." + + ::= { ibmappnLocalEnEntry 2 } + + ibmappnLocalEnType OBJECT-TYPE + SYNTAX INTEGER { + endnode(2), + len(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Type of APPN node (must always be a len or end node)." + + ::= { ibmappnLocalEnEntry 3 } + + + --APPN Local End node Transmission Group (TG) table + + -- This table describes the TGs associated with + -- all of the end nodes known to this node. + + ibmappnLocalEnTgTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnLocalEnTgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table describing all of the TGs owned by the + end nodes known to this node. + The TG destination can be a virtual + node, network node, or end node." + + ::= { ibmappnLocalEnTopology 2 } + + + + +McKenzie & Cheng [Page 94] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnLocalEnTgEntry OBJECT-TYPE + SYNTAX IbmappnLocalEnTgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table requires multiple indexes to uniquely + identify each TG. They are originating CPname, + destination CPname, and the TG number." + + INDEX + {ibmappnLocalEnTgOrigin, + ibmappnLocalEnTgDest, + ibmappnLocalEnTgNum} + + ::= { ibmappnLocalEnTgTable 1 } + + IbmappnLocalEnTgEntry ::= SEQUENCE { + ibmappnLocalEnTgOrigin DisplayString, + ibmappnLocalEnTgDest DisplayString, + ibmappnLocalEnTgNum INTEGER, + ibmappnLocalEnTgEntryTimeLeft INTEGER, + + ibmappnLocalEnTgDestVirtual INTEGER, + ibmappnLocalEnTgDlcData OCTET STRING, + + ibmappnLocalEnTgOperational INTEGER, + ibmappnLocalEnTgCpCpSession INTEGER, + ibmappnLocalEnTgEffCap INTEGER, + ibmappnLocalEnTgConnCost INTEGER, + ibmappnLocalEnTgByteCost INTEGER, + ibmappnLocalEnTgSecurity INTEGER, + ibmappnLocalEnTgDelay INTEGER, + ibmappnLocalEnTgModemClass INTEGER, + ibmappnLocalEnTgUsr1 INTEGER, + ibmappnLocalEnTgUsr2 INTEGER, + ibmappnLocalEnTgUsr3 INTEGER + } + + ibmappnLocalEnTgOrigin OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for the + origination node for this TG. + This is the fully-qualified network name." + + ::= { ibmappnLocalEnTgEntry 1 } + + + +McKenzie & Cheng [Page 95] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnLocalEnTgDest OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for the + destination node for this TG. + This is the fully-qualified network name." + + ::= { ibmappnLocalEnTgEntry 2 } + + ibmappnLocalEnTgNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number associated with this transmission group." + + ::= { ibmappnLocalEnTgEntry 3 } + + ibmappnLocalEnTgEntryTimeLeft OBJECT-TYPE + SYNTAX INTEGER (0..31) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of days before deletion of this + end node TG entry. Range is 0-31." + + ::= { ibmappnLocalEnTgEntry 4 } + + ibmappnLocalEnTgDestVirtual OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the destination node is + a virtual node." + + ::= { ibmappnLocalEnTgEntry 5 } + + ibmappnLocalEnTgDlcData OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION + "DLC specific data related to the link connection + network. + Token-Ring - MAC/SAP + + + +McKenzie & Cheng [Page 96] + +RFC 1593 SNA APPN Node MIB March 1994 + + + X.25 Switched - dial digits + X.21 Switched - dial digits + Circuit Swtch - dial digits" + + ::= { ibmappnLocalEnTgEntry 6 } + + ibmappnLocalEnTgOperational OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether the Transmission Group is operational." + + ::= { ibmappnLocalEnTgEntry 7 } + + ibmappnLocalEnTgCpCpSession OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether CP-CP sessions are supported on this TG." + + ::= { ibmappnLocalEnTgEntry 8 } + + ibmappnLocalEnTgEffCap OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The effective capacity is an integer value that indicates + the actual kilo bits per second. + It is derived from the link bandwidth and maximum load + factor with the range of 0 thru 603,979,776." + + ::= { ibmappnLocalEnTgEntry 9 } + + ibmappnLocalEnTgConnCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Cost per connect time: a value representing + the relative cost per unit of time to use + the TG. Range is from 0, which means no cost, + to 255." + + ::= { ibmappnLocalEnTgEntry 10 } + + + + +McKenzie & Cheng [Page 97] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnLocalEnTgByteCost OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Relative cost of transmitting a byte over this link. + Range is from 0, which means no cost, to 255." + + ::= { ibmappnLocalEnTgEntry 11 } + + ibmappnLocalEnTgSecurity OBJECT-TYPE + SYNTAX INTEGER { + nonsecure(1), --X'01' + publicSwitchedNetwork(32), --X'20' + undergroundCable(64), --X'40' + secureConduit(96), --X'60' + guardedConduit(128), --X'80' + encrypted(160), --X'A0' + guardedRadiation(192) --X'C0' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Security level for this TG." + + ::= { ibmappnLocalEnTgEntry 12 } + + ibmappnLocalEnTgDelay OBJECT-TYPE + SYNTAX INTEGER { + minimum(0), --X'00' + negligible(384), --X'4C' + terrestrial(9216), --X'71' + packet(147456), --X'91' + long(294912), --X'99' + maximum(2013265920) --X'FF' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Relative amount of time that it takes for a signal to + travel the length of the logical link. This time is + represented in micro seconds, with some of the more + common values enumerated." + + ::= { ibmappnLocalEnTgEntry 13 } + + ibmappnLocalEnTgModemClass OBJECT-TYPE + SYNTAX INTEGER (0..65535) + + + +McKenzie & Cheng [Page 98] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is used to have multiple images for a + connection network. For a connection network + it is the same as in the TG vector and for + a non connection network it is zero." + + ::= { ibmappnLocalEnTgEntry 14 } + + ibmappnLocalEnTgUsr1 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "First user-defined TG characteristic + for this TG. Range of values is 0-255." + + ::= { ibmappnLocalEnTgEntry 15 } + + ibmappnLocalEnTgUsr2 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Second user-defined TG characteristic + for this TG. Range of values is 0-255." + + ::= { ibmappnLocalEnTgEntry 16 } + + ibmappnLocalEnTgUsr3 OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Third user-defined TG characteristic + for this TG. Range of values is 0-255." + + ::= { ibmappnLocalEnTgEntry 17 } + + + -- ************** The APPN Directory group ********************** + ibmappnDir OBJECT IDENTIFIER ::= { ibmappn 5 } + ibmappnDirPerf OBJECT IDENTIFIER ::= { ibmappnDir 1 } + + -- The APPN Directory Group + + -- The APPN Directory Database + + + +McKenzie & Cheng [Page 99] + +RFC 1593 SNA APPN Node MIB March 1994 + + + -- Each APPN network node maintains directories containing + -- information on which LUs (applications) are available and + -- where they are located. LUs can be located within an APPN + -- network node or in any of the attached end nodes. + + -- Max Cache Directory Entries + -- Current Number of Cache Entries + -- Current Number Home Entries + -- Current Number of Registered Entries + -- number of directed locates sent + -- number of directed locates received + -- number of broadcast locates sent + -- number of broadcast locates received + -- Number of locates returned with a found + -- Number of locates returned with a not found + -- Number of outstanding Locates + -- Directory table (Repeated for each Serving NN) + + -- Serving Network Node Fully Qualified CP Name + + -- LU Groups within Directory table (one for each LU) + + -- Fully-qualified LU Name + -- Owning fully-qualified CP Name + -- TP Name + -- Resource location (local/domain/cross-domain) + -- Entry type (home,Register/cache) + -- Wildcard (yes/no) + + + ibmappnDirMaxCaches OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum number of cache entries allowed. This + is an administratively assigned value." + + ::= { ibmappnDirPerf 1 } + + ibmappnDirCurCaches OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current number of cache entries." + + ::= { ibmappnDirPerf 2 } + + + +McKenzie & Cheng [Page 100] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnDirCurHomeEntries OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current number of home entries." + + ::= { ibmappnDirPerf 3 } + + ibmappnDirRegEntries OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current number of registered entries." + + ::= { ibmappnDirPerf 4 } + + ibmappnDirInLocates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of directed locates received." + + ::= { ibmappnDirPerf 5 } + + ibmappnDirInBcastLocates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of broadcast locates received." + + ::= { ibmappnDirPerf 6 } + + ibmappnDirOutLocates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of directed locates sent." + + ::= { ibmappnDirPerf 7 } + + ibmappnDirOutBcastLocates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + + + +McKenzie & Cheng [Page 101] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "Number of broadcast locates sent." + + ::= { ibmappnDirPerf 8 } + + ibmappnDirNotFoundLocates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of directed locates returned with a 'not found'." + + ::= { ibmappnDirPerf 9 } + + ibmappnDirNotFoundBcastLocates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Number of broadcast locates returned with + a not found." + + ::= { ibmappnDirPerf 10 } + + ibmappnDirLocateOutstands OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current number of outstanding locates, + both directed and broadcast. This value + varies. A value of zero indicates + that no locates are unanswered." + + ::= { ibmappnDirPerf 11 } + + + --APPN Directory table + + -- This table contains information about all known + -- LUs and TPs. + + ibmappnDirTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnDirEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + + + +McKenzie & Cheng [Page 102] + +RFC 1593 SNA APPN Node MIB March 1994 + + + "Table containing information about + all known LUs and TPs." + + ::= { ibmappnDir 2 } + + ibmappnDirEntry OBJECT-TYPE + SYNTAX IbmappnDirEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is indexed by the LU name." + + INDEX + {ibmappnDirLuName} + + ::= { ibmappnDirTable 1 } + + IbmappnDirEntry ::= SEQUENCE { + ibmappnDirLuName DisplayString, + ibmappnDirServerName DisplayString, + ibmappnDirLuOwnerName DisplayString, + ibmappnDirLuLocation INTEGER, + ibmappnDirType INTEGER, + ibmappnDirWildCard INTEGER + } + + ibmappnDirLuName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Fully-qualified network LU name in the + domain of the serving network node." + + ::= { ibmappnDirEntry 1 } + + ibmappnDirServerName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Fully-qualified control point (CP) name of the + network node server. For unassociated end node + entries, the end node fully-qualified name + is returned." + + ::= { ibmappnDirEntry 2 } + + + + +McKenzie & Cheng [Page 103] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnDirLuOwnerName OBJECT-TYPE + SYNTAX DisplayString (SIZE (3..17)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Fully-qualified CP name of the node at which + the LU is located. This name is the same as the + serving NN name when the LU is located at a + network node or an unassociated end node. It is + also the same as the fully-qualified LU name + when this is the control point LU for this node." + + ::= { ibmappnDirEntry 3 } + + + ibmappnDirLuLocation OBJECT-TYPE + SYNTAX INTEGER { + local(1), --Local + domain(2), --Domain + xdomain(3) --Cross Domain + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Specifies the location of the LU." + + ::= { ibmappnDirEntry 4 } + + ibmappnDirType OBJECT-TYPE + SYNTAX INTEGER { + home(1), --defined as home entry + cache(2), --learned over time + registered(3) --registered by end node + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Directory types are: + 1 - Home + The LU is in the domain of the local network node + and the LU information has been configured at the + local node. + + 2 - Cache + The LU has previously been located by a broadcast + search and the location information has been saved. + + 3 - Register + + + +McKenzie & Cheng [Page 104] + +RFC 1593 SNA APPN Node MIB March 1994 + + + The LU is at an end node that is in the domain + of the local network node. Registered entries + are registered by the served end node." + + ::= { ibmappnDirEntry 5 } + + + ibmappnDirWildCard OBJECT-TYPE + SYNTAX INTEGER { + other(1), + explicit-entry(2), + partial-wildcard(3), + full-wildcard(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "1 - Other means unknown type of LU entry. + 2 - Expliced-entry means the full LUNAME will be used + for locating this LU. + 3 - Partial-wildcard means only the non-blank portions + of the LUNAME will be used for locating this LU. + 4 - Full-wildcard means all LUNAMES will be directed + to this LU." + + ::= { ibmappnDirEntry 6 } + + + -- ************** The APPN Class of Service group *************** + + ibmappnCos OBJECT IDENTIFIER ::= { ibmappn 6 } --APPN COS + + -- The APPN Class of Service (COS) + + -- Class of Service is a means of expressing the quality of the routes + -- and the transmission priority of traffic which flows on these routes. + -- The quality of routes is specified by two tables, a COS weight table + -- for TGs and a COS weight table for nodes. These COS tables are + -- administratively assigned at each APPN node. Seven default tables + + -- for TGs and a COS weight table for Nodes. These COS tables are + -- administratively assigned at each APPN node with seven default tables + -- being provided by IBM. + -- + -- + -- COS Name + -- Unqualified name identifying the class of service. + -- Transmission priority + + + +McKenzie & Cheng [Page 105] + +RFC 1593 SNA APPN Node MIB March 1994 + + + -- Transmission priority associated with this class of service + -- COS Node Row Table + -- At least one node row must be specified. The default + -- COS tables specify 8 rows. + -- Node Row Weight + -- Numeric value between 0 and 255 inclusive indicating + -- the weight associated with this row. + -- Route addition resist (min) + -- Numeric value between 0 and 255 inclusive indicating + -- the minimum route addition resistance for this row. + -- Route addition resist (max) + -- Numeric value between 0 and 255 inclusive indicating + -- the maximum route addition resistance for this row. + -- Congestion (min) + -- Indicates whether this class of service for this row + -- will accept congestion. Yes or No must be specified. + -- Congestion (max) + -- Indicates whether this Class of Service for this row + -- will accept congestion. Yes or No must be specified. + -- + -- COS TG Row table + -- At least one TG row must be specified with the defaults + -- COS tables specify 8 rows. + -- TG Row Weight + -- Numeric value between 0 and 255 inclusive indicating + -- the weight associated with this row. + -- Effective capacity (min) + -- Indicates the lowest acceptable value for this row. + -- Effective capacity (max) + -- Indicates the highest required value for this row. + -- Cost per connect time (min) + -- Indicates the lowest connect cost per unit time value + -- for this row. This value is between 0 and 255 inclusive. + -- Cost per connect time (max) + -- Indicates the highest connect cost per unit time value + -- for this row. This value is between 0 and 255 inclusive. + -- Cost per byte (min) + -- Indicates the lowest cost per byte value + -- for this row. This value is between 0 and 255 inclusive. + -- Cost per byte (max) + -- Indicates the highest cost per byte value + -- for this row. This value is between 0 and 255 inclusive. + -- Security (min) + -- Indicates the lowest acceptable value for security + -- for this row. This value is one of seven values. + -- Security (max) + -- Indicates the highest acceptable value for security + -- for this row. This value is one of seven values. + + + +McKenzie & Cheng [Page 106] + +RFC 1593 SNA APPN Node MIB March 1994 + + + -- Propagation delay (min) + -- Indicates the lowest acceptable propagation delay value + -- for this row. + -- Propagation delay (max) + -- Indicates the highest acceptable propagation delay value + -- for this row. + -- User defined 1 (min) + -- Indicates the lowest acceptable value + -- for this row. This value is between 0 and 255 inclusive. + -- User defined 1 (max) + -- Indicates the highest acceptable value + -- for this row. This value is between 0 and 255 inclusive. + -- User defined 2 (min) + -- Same as user defined 1 + -- User defined 2 (max) + -- Same as user defined 1 + -- User defined 3 (min) + -- Same as user defined 1 + -- User defined 3 (max) + -- Same as user defined 1 + -- + -- + -- + --Due to SNMP ASN.1 limitations the COS table is defined + --in the following format. + -- + -- MODE name table + -- MODE Name (index) + -- COS Name + -- + -- COS name table + -- COS Name (index) + -- Transmission priority + -- + -- COS node row table + -- COS Name (index1) + -- Index2 + -- Node Row Weight + -- Rte addition resist (min) + -- Rte addition resist (max) + -- Congestion (min) + -- Congestion (max) + -- + -- COS TG row table + -- COS Name (index1) + -- Index + -- TG Row Weight + -- Effective capacity (min) + + + +McKenzie & Cheng [Page 107] + +RFC 1593 SNA APPN Node MIB March 1994 + + + -- Effective capacity (max) + -- Cost per conn time (min) + -- Cost per conn time (max) + -- cost per byte (min) + -- cost per byte (max) + -- Security (min) + -- Security (max) + -- Propagation delay (min) + -- Propagation delay (max) + -- User defined 1 (min) + -- User defined 1 (max) + -- User defined 2 (min) + -- User defined 2 (max) + -- User defined 3 (min) + -- User defined 3 (max) + -- + -- ************************************************************** + + + ibmappnCosModeTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnCosModeEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table representing all of the defined + mode names for this node. The table + contains the matching COS name." + + ::= { ibmappnCos 1 } + + ibmappnCosModeEntry OBJECT-TYPE + SYNTAX IbmappnCosModeEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is indexed by the Mode Name." + + INDEX + {ibmappnCosModeName} + + ::= { ibmappnCosModeTable 1 } + + IbmappnCosModeEntry ::= SEQUENCE { + ibmappnCosModeName DisplayString, + ibmappnCosModeCosName DisplayString + } + + ibmappnCosModeName OBJECT-TYPE + + + +McKenzie & Cheng [Page 108] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this + mode entry." + + ::= { ibmappnCosModeEntry 1 } + + ibmappnCosModeCosName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An administratively assigned name for this + Class of Service." + + ::= { ibmappnCosModeEntry 2 } + + + -- ************************************************************** + + ibmappnCosNameTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnCosNameEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table representing all of the defined class-of-service + names for this node. The COS node and TG tables are + accessed using the same index, which is the COS name." + + ::= { ibmappnCos 2 } + + ibmappnCosNameEntry OBJECT-TYPE + SYNTAX IbmappnCosNameEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The COS name is the index to this table." + + INDEX + {ibmappnCosName} + + ::= { ibmappnCosNameTable 1 } + + IbmappnCosNameEntry ::= SEQUENCE { + ibmappnCosName DisplayString, + ibmappnCosTransPriority INTEGER + + + +McKenzie & Cheng [Page 109] + +RFC 1593 SNA APPN Node MIB March 1994 + + + } + + + ibmappnCosName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this + class of service." + + ::= { ibmappnCosNameEntry 1 } + + ibmappnCosTransPriority OBJECT-TYPE + SYNTAX INTEGER { + low(1), --X'01' + medium(2), --X'02' + high(3), --X'03' + network(4) --X'04' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Transmission priority for this + class of service. Values are: + Low + Medium + High + Network " + + ::= { ibmappnCosNameEntry 2 } + + + ibmappnCosNodeRowTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnCosNodeRowEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table contains all node-row information for all + class of service in this node." + + ::= { ibmappnCos 3 } + + ibmappnCosNodeRowEntry OBJECT-TYPE + SYNTAX IbmappnCosNodeRowEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + + + +McKenzie & Cheng [Page 110] + +RFC 1593 SNA APPN Node MIB March 1994 + + + "The COS name is the first index and a integer + is the second index to insure a unique index." + + INDEX + {ibmappnCosNodeRowName, + ibmappnCosNodeRowIndex} + + ::= { ibmappnCosNodeRowTable 1 } + + IbmappnCosNodeRowEntry ::= SEQUENCE { + ibmappnCosNodeRowName DisplayString, + ibmappnCosNodeRowIndex INTEGER, + --Node Row Group + ibmappnCosNodeRowWgt DisplayString, + ibmappnCosNodeRowResistMin INTEGER, + ibmappnCosNodeRowResistMax INTEGER, + ibmappnCosNodeRowMinCongestAllow INTEGER, + ibmappnCosNodeRowMaxCongestAllow INTEGER + } + + ibmappnCosNodeRowName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this + class of service." + + ::= { ibmappnCosNodeRowEntry 1 } + + ibmappnCosNodeRowIndex OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index of COS name. This same value is used + to access the node and TG COS tables. + Range of values is 0-255." + + ::= { ibmappnCosNodeRowEntry 2 } + + --Node Row Group + + ibmappnCosNodeRowWgt OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + + + +McKenzie & Cheng [Page 111] + +RFC 1593 SNA APPN Node MIB March 1994 + + + "Weight to be associated with the nodes + that fit the criteria specified by this node row." + + ::= { ibmappnCosNodeRowEntry 3 } + + ibmappnCosNodeRowResistMin OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum route addition resistance value + for this node. Range of values is 0-255. + The lower the value, the more desirable + the node is for intermediate routing." + + ::= { ibmappnCosNodeRowEntry 4 } + + ibmappnCosNodeRowResistMax OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum route addition resistance value + for this node. Range of values is 0-255. + The lower the value, the more desirable + the node is for intermediate routing." + + ::= { ibmappnCosNodeRowEntry 5 } + + ibmappnCosNodeRowMinCongestAllow OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether low congestion will be + tolerated. The minimum and maximum parameters + will allow specifying either low-congested, + high-congested, or either to be used." + + ::= { ibmappnCosNodeRowEntry 6 } + + ibmappnCosNodeRowMaxCongestAllow OBJECT-TYPE + SYNTAX INTEGER {yes(1), no(2)} + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates whether high congestion will be + tolerated. The minimum and maximum parameters + + + +McKenzie & Cheng [Page 112] + +RFC 1593 SNA APPN Node MIB March 1994 + + + will allow specifying either low-congested, + high-congested, or either to be used." + + ::= { ibmappnCosNodeRowEntry 7 } + + + -- COS TG row table + -- Index + -- TG Row Weight + -- Effective capacity (min) + -- Effective capacity (max) + -- Cost per conn time (min) + -- Cost per conn time (max) + -- cost per byte (min) + -- cost per byte (max) + -- Security (min) + -- Security (max) + -- Propagation delay (min) + -- Propagation delay (max) + -- User defined 1 (min) + -- User defined 1 (max) + -- User defined 2 (min) + -- User defined 2 (max) + -- User defined 3 (min) + -- User defined 3 (max) + -- + + ibmappnCosTgRowTable OBJECT-TYPE + SYNTAX SEQUENCE OF IbmappnCosTgRowEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table containing all the Tg-row information for all + class of service defined in this node." + + ::= { ibmappnCos 4 } + + ibmappnCosTgRowEntry OBJECT-TYPE + SYNTAX IbmappnCosTgRowEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The TgRowName and the TgRowIndex are the index + for this table." + + INDEX + {ibmappnCosTgRowName, + ibmappnCosTgRowIndex} + + + +McKenzie & Cheng [Page 113] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ::= { ibmappnCosTgRowTable 1 } + + IbmappnCosTgRowEntry ::= SEQUENCE { + ibmappnCosTgRowName DisplayString, + ibmappnCosTgRowIndex INTEGER, + --TG Row Group + ibmappnCosTgRowWgt DisplayString, + ibmappnCosTgRowEffCapMin INTEGER, + ibmappnCosTgRowEffCapMax INTEGER, + ibmappnCosTgRowConnCostMin INTEGER, + ibmappnCosTgRowConnCostMax INTEGER, + ibmappnCosTgRowByteCostMin INTEGER, + ibmappnCosTgRowByteCostMax INTEGER, + ibmappnCosTgRowSecurityMin INTEGER, + ibmappnCosTgRowSecurityMax INTEGER, + ibmappnCosTgRowDelayMin INTEGER, + ibmappnCosTgRowDelayMax INTEGER, + ibmappnCosTgRowUsr1Min INTEGER, + ibmappnCosTgRowUsr1Max INTEGER, + ibmappnCosTgRowUsr2Min INTEGER, + ibmappnCosTgRowUsr2Max INTEGER, + ibmappnCosTgRowUsr3Min INTEGER, + ibmappnCosTgRowUsr3Max INTEGER + } + + ibmappnCosTgRowName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Administratively-assigned name for this + class of service." + + ::= { ibmappnCosTgRowEntry 1 } + + ibmappnCosTgRowIndex OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Index of COS name. This same value is used + to access the node and TG COS tables." + + ::= { ibmappnCosTgRowEntry 2 } + + --TG Row + + ibmappnCosTgRowWgt OBJECT-TYPE + + + +McKenzie & Cheng [Page 114] + +RFC 1593 SNA APPN Node MIB March 1994 + + + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Weight to be associated with the nodes + that fit the criteria specified by this tg-row." + + ::= { ibmappnCosTgRowEntry 3 } + + ibmappnCosTgRowEffCapMin OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum acceptable speed for this Class of Service. + The effective capacity is an integer value that indicates + the actual kilo bits per second. + It is derived from the link bandwidth and maximum load + factor with the range of 0 thru 603,979,776." + + ::= { ibmappnCosTgRowEntry 4 } + + ibmappnCosTgRowEffCapMax OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum acceptable speed for this Class of Service. + The effective capacity is an integer value that indicates + the actual kilo bits per second. + It is derived from the link bandwidth and maximum load + factor with the range of 0 thru 603,979,776." + + ::= { ibmappnCosTgRowEntry 5 } + + ibmappnCosTgRowConnCostMin OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum acceptable cost per connect time + for this Class of Service. + Cost per connect time: a value representing + the relative cost per unit of time to use + the TG. Range is from 0, which means no cost, + to 255." + + ::= { ibmappnCosTgRowEntry 6 } + + + +McKenzie & Cheng [Page 115] + +RFC 1593 SNA APPN Node MIB March 1994 + + + ibmappnCosTgRowConnCostMax OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum acceptable cost per connect time + for this Class of Service. + Cost per connect time: a value representing + the relative cost per unit of time to use + the TG. Range is from 0, which means no cost, + to 255." + + ::= { ibmappnCosTgRowEntry 7 } + + ibmappnCosTgRowByteCostMin OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum acceptable cost per byte + for this Class of Service." + + ::= { ibmappnCosTgRowEntry 8 } + + ibmappnCosTgRowByteCostMax OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum acceptable cost per byte + for this Class of Service." + + ::= { ibmappnCosTgRowEntry 9 } + + ibmappnCosTgRowSecurityMin OBJECT-TYPE + SYNTAX INTEGER { + nonsecure(1), --X'01' + publicSwitchedNetwork(32), --X'20' + undergroundCable(64), --X'40' + secureConduit(96), --X'60' + guardedConduit(128), --X'80' + encrypted(160), --X'A0' + guardedRadiation(192) --X'C0' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum acceptable security + + + +McKenzie & Cheng [Page 116] + +RFC 1593 SNA APPN Node MIB March 1994 + + + for this Class of Service." + + ::= { ibmappnCosTgRowEntry 10 } + + ibmappnCosTgRowSecurityMax OBJECT-TYPE + SYNTAX INTEGER { + nonsecure(1), --X'01' + publicSwitchedNetwork(32), --X'20' + undergroundCable(64), --X'40' + secureConduit(96), --X'60' + guardedConduit(128), --X'80' + encrypted(160), --X'A0' + guardedRadiation(192) --X'C0' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum acceptable security + for this Class of Service." + + ::= { ibmappnCosTgRowEntry 11 } + + ibmappnCosTgRowDelayMin OBJECT-TYPE + SYNTAX INTEGER { + minimum(0), --X'00' + negligible(384), --X'4C' + terrestrial(9216), --X'71' + packet(147456), --X'91' + long(294912), --X'99' + maximum(2013265920) --X'FF' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum acceptable propagation delay for this class of service. + Relative amount of time that it takes for a signal to travel + the length of the logical link. This time is represented in + micro seconds, with the more values enumerated." + + ::= { ibmappnCosTgRowEntry 12 } + + ibmappnCosTgRowDelayMax OBJECT-TYPE + SYNTAX INTEGER { + minimum(0), --X'00' + negligible(384), --X'4C' + terrestrial(9216), --X'71' + packet(147456), --X'91' + long(294912), --X'99' + + + +McKenzie & Cheng [Page 117] + +RFC 1593 SNA APPN Node MIB March 1994 + + + maximum(2013265920) --X'FF' + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum acceptable propagation delay for this class of service. + Relative amount of time that it takes for a signal to travel + the length of the logical link. This time is represented in + micro seconds, with the more values enumerated." + + ::= { ibmappnCosTgRowEntry 13 } + + ibmappnCosTgRowUsr1Min OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum acceptable value for this + user defined characteristic. + Range of values is 0-255." + + ::= { ibmappnCosTgRowEntry 14 } + + ibmappnCosTgRowUsr1Max OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum acceptable value for this + user defined characteristic. + Range of values is 0-255." + + ::= { ibmappnCosTgRowEntry 15 } + + ibmappnCosTgRowUsr2Min OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum acceptable value for this + user defined characteristic. + Range of values is 0-255." + + ::= { ibmappnCosTgRowEntry 16 } + + ibmappnCosTgRowUsr2Max OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + + + +McKenzie & Cheng [Page 118] + +RFC 1593 SNA APPN Node MIB March 1994 + + + STATUS mandatory + DESCRIPTION + "A Maximum acceptable value for this + user defined characteristic." + + ::= { ibmappnCosTgRowEntry 17 } + + ibmappnCosTgRowUsr3Min OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Minimum acceptable value for this + user defined characteristic. + Range of values is 0-255." + + ::= { ibmappnCosTgRowEntry 18 } + + ibmappnCosTgRowUsr3Max OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Maximum acceptable value for this + user defined characteristic. + Range of values is 0-255." + + ::= { ibmappnCosTgRowEntry 19 } + + END + +3.0 Acknowledgements + + Thanks go to David Chen, Leo Temoshenko, and Mike Allen for their + contribution and support through the development process. + +4.0 Security Considerations + + Security issues are not discussed in this memo. + + + + + + + + + + + + +McKenzie & Cheng [Page 119] + +RFC 1593 SNA APPN Node MIB March 1994 + + +5.0 Authors' Addresses + + William F. McKenzie + IBM Networking Systems + P. O. Box 12195 + Research Triangle Park, NC 27709 + US + + Phone: +1 919 254 5705 + EMail: mckenzie@ralvma.vnet.ibm.com + + + Jia-bing R. Cheng + IBM Networking Systems + P. O. Box 12195 + Research Triangle Park, NC 27709 + US + + Phone: +1 919 254 4434 + EMail: cheng@ralvm6.vnet.ibm.com + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +McKenzie & Cheng [Page 120] + |