diff options
| author | Thomas Voss <mail@thomasvoss.com> | 2024-11-27 20:54:24 +0100 |
|---|---|---|
| committer | Thomas Voss <mail@thomasvoss.com> | 2024-11-27 20:54:24 +0100 |
| commit | 4bfd864f10b68b71482b35c818559068ef8d5797 (patch) | |
| tree | e3989f47a7994642eb325063d46e8f08ffa681dc /doc/rfc/rfc3872.txt | |
| parent | ea76e11061bda059ae9f9ad130a9895cc85607db (diff) | |
doc: Add RFC documents
Diffstat (limited to 'doc/rfc/rfc3872.txt')
| -rw-r--r-- | doc/rfc/rfc3872.txt | 2971 |
1 files changed, 2971 insertions, 0 deletions
diff --git a/doc/rfc/rfc3872.txt b/doc/rfc/rfc3872.txt new file mode 100644 index 0000000..7e6b70e --- /dev/null +++ b/doc/rfc/rfc3872.txt @@ -0,0 +1,2971 @@ + + + + + + +Network Working Group D. Zinman +Request for Comments: 3872 D. Walker +Category: Standards Track J. Jiang + September 2004 + + + Management Information Base + for Telephony Routing over IP (TRIP) + +Status of this Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (2004). + +Abstract + + This memo defines a portion of the Management Information Base (MIB) + module for use with network management protocols in the Internet + community. In particular, it describes a set of managed objects that + are used to manage Telephony Routing over IP (TRIP) devices. + +Table of Contents + + 1. The Internet-Standard Management Framework . . . . . . . . . . 2 + 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2 + 3. Conventions used in this document. . . . . . . . . . . . . . . 2 + 4. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 + 5. Structure of TRIP MIB. . . . . . . . . . . . . . . . . . . . . 2 + 5.1. Textual Conventions. . . . . . . . . . . . . . . . . . . 3 + 6. Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . 4 + 6.1. TRIP Textual Conventions . . . . . . . . . . . . . . . . 4 + 6.2. TRIP MIB . . . . . . . . . . . . . . . . . . . . . . . . 7 + 7. Security Considerations. . . . . . . . . . . . . . . . . . . . 48 + 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 50 + 8.1. Normative References . . . . . . . . . . . . . . . . . . 50 + 8.2. Informative References . . . . . . . . . . . . . . . . . 51 + 9. Acknowledgments. . . . . . . . . . . . . . . . . . . . . . . . 51 + 10. Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 52 + 11. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 53 + + + + + +Zinman, et al. Standards Track [Page 1] + +RFC 3872 MIB for TRIP September 2004 + + +1. The Internet-Standard Management Framework + + For a detailed overview of the documents that describe the current + Internet-Standard Management Framework, please refer to section 7 of + RFC 3410 [RFC3410]. + + Managed objects are accessed via a virtual information store, termed + the Management Information Base or MIB. MIB module objects are + generally accessed through the Simple Network Management Protocol + (SNMP). Objects in this MIB module are defined using the mechanisms + defined in the Structure of Management Information (SMI). This memo + specifies a MIB module that is compliant to the SMIv2, which is + described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579], + and STD 58, RFC 2580 [RFC2580]. + +2. Introduction + + This memo defines a portion of the Management Information Base (MIB) + for use with network management protocols in the Internet community. + In particular, it describes a set of managed objects that are used + to schedule management operations periodically or at specified dates + and times. Since TRIP [RFC3219] is modeled after the Border Gateway + Protocol (BGP-4) [RFC1771], the managed objects for TRIP are also + modeled after RFC1657 - Definitions of Managed Objects for the + Fourth Version of the Border Gateway Protocol (BGP-4) using SMIv2 + [RFC1657]. + +3. Conventions used in this document + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in + this document are to be interpreted as described in BCP 14, RFC 2119 + [RFC2119]. + +4. Overview + + This MIB module provides managed objects for TRIP devices defined in + Telephony Routing over IP [RFC3219]. TRIP is an inter-domain + application-layer control protocol that exchanges information + between TRIP location servers (LS) to provide efficient IP telephony + routing. + +5. Structure of TRIP MIB + + This MIB module utilizes the framework described in RFC 2788 + [RFC2788] for management of multiple instances of TRIP from a single + entity. The Network Services Monitoring MIB module applTable will + be populated with entries corresponding to each TRIP Location Server + + + +Zinman, et al. Standards Track [Page 2] + +RFC 3872 MIB for TRIP September 2004 + + + in the system. Each TRIP Location Server will then have an + applIndex associated with it. The value assigned to applIndex will + represent the distinct instance of TRIP. + + The TRIP MIB module contains the following groups of objects with + each group as part of the management of a singular TRIP entity. Each + group covers a section of functionality of TRIP: + + o The tripConfigGroup contains the common configuration objects + applicable to all TRIP applications referenced by the applIndex. + + o The tripPeerTableConfigGroup contains the configuration objects + applicable to all TRIP peers of the Location Server referenced by + the applIndex. + + o The tripRouteGroup contains the configuration objects related to + the routes of all TRIBs of this Location Server. + + o The tripItadTopologyGroup contains information about the topology + of the TRIP ITADs concerning this Location Server. + + o The tripPeerTableStatsGroup contains the statistical objects + applicable to all TRIP peers of the Location Server referenced by + the applIndex. + + o The tripNotificationGroup contains notifications that the TRIP + application can generate. + + o The tripNotifObjectGroup contains the objects needed by one or + more of the notifications. + +5.1. Textual Conventions + + The data types TripItad and TripId are used as textual conventions + in this document. A TRIP ITAD (IP Telephony Administrative Domain) + is described in [RFC3219]. A TRIP ID is used as a distinct + identifier for a TRIP Location Server. A TripAppProtocol is used to + identify an application protocol. A TripAddressFamily is used to + define an address family. TripCommunityId is used as a distinct + identifier for a TRIP community. TripProtocolVersion depicts the + version number of the TRIP protocol. TripSendReceiveMode describes + the operational mode of the TRIP application. + + + + + + + + + +Zinman, et al. Standards Track [Page 3] + +RFC 3872 MIB for TRIP September 2004 + + +6. Definitions + +6.1. TRIP Textual Conventions + +TRIP-TC-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + Unsigned32, + Integer32, + mib-2 + FROM SNMPv2-SMI -- [RFC2578] + + TEXTUAL-CONVENTION + FROM SNMPv2-TC; -- [RFC2579] + +tripTC MODULE-IDENTITY + LAST-UPDATED "200409020000Z" -- Sep 02, 2004 + ORGANIZATION "IETF IPTel Working Group. + Mailing list: iptel@lists.bell-labs.com" + CONTACT-INFO + "Co-editor David Zinman + postal: 265 Ridley Blvd. + Toronto ON, M5M 4N8 + Canada + email: dzinman@rogers.com + phone: +1 416 433 4298 + + Co-editor: David Walker + Sedna Wireless Inc. + postal: 495 March Road, Suite 500 + Ottawa, ON K2K 3G1 + Canada + email: david.walker@sedna-wireless.com + phone: +1 613 878 8142 + + Co-editor Jianping Jiang + Syndesis Limited + postal: 30 Fulton Way + Richmond Hill, ON L4B 1J5 + Canada + + email: jjiang@syndesis.com + phone: +1 905 886-7818 x2515 + " + DESCRIPTION + "Initial version of TRIP (Telephony Routing Over IP) + MIB Textual Conventions module used by other + + + +Zinman, et al. Standards Track [Page 4] + +RFC 3872 MIB for TRIP September 2004 + + + TRIP-related MIB Modules. + + Copyright (C) The Internet Society (2004). This version of + this MIB module is part of RFC 3872, see the RFC itself + for full legal notices." + REVISION "200409020000Z" -- Sep 02, 2004 + DESCRIPTION + "The initial version, Published as RFC 3872." + ::= { mib-2 115 } + +-- +-- Textual Conventions +-- + +TripItad ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The values for identifying the IP Telephony + Administrative Domain (ITAD)." + SYNTAX Unsigned32 (0..4294967295) + +TripId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TRIP Identifier uniquely identifies a LS within its + ITAD. It is a 4 octet unsigned integer that may, but not + necessarily, represent the IPv4 address of a Location + Server. Where bytes 1-4 of the Unsigned32 represent + 1-4 bytes of the IPv4 address in network-byte order. For + an IPv6 network, TripId will not represent the IPv6 + address." + SYNTAX Unsigned32 (0..4294967295) + +TripAddressFamily ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A type of address for a TRIP route. Address families + defined within this MIB module are: + + Code Address Family + 1 Decimal Routing Numbers + 2 PentaDecimal Routing Numbers + 3 E.164 Numbers + 255 An other type of address family" + + SYNTAX INTEGER + { decimal(1), pentadecimal(2), e164(3), other(255) } + + + + +Zinman, et al. Standards Track [Page 5] + +RFC 3872 MIB for TRIP September 2004 + + +TripAppProtocol ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The application protocol used for communication with TRIP + Location Servers. Protocols defined in this MIB Module + are: + + Code Protocol + 1 SIP + 2 H.323-H.225.0-Q.931 + 3 H.323-H.225.0-RAS + 4 H.323-H.225.0-Annex-G + 255 An other type of application protocol" + + SYNTAX INTEGER + { sip(1), q931(2), ras(3), annexG(4), other(255) } + +TripCommunityId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The range of legal values for a TRIP Community + Identifier." + SYNTAX Unsigned32 (0..4294967295) + +TripProtocolVersion ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The version number of the TRIP protocol." + SYNTAX Integer32 (1..255) + +TripSendReceiveMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The operational mode of the TRIP application. Possible + values are: + 1 - Send Receive mode + 2 - Send only mode + 3 - Receive Only mode" + SYNTAX INTEGER { sendReceive(1), sendOnly(2), receiveOnly(3) } + +END + + + + + + + + + + +Zinman, et al. Standards Track [Page 6] + +RFC 3872 MIB for TRIP September 2004 + + +6.2. TRIP MIB + +TRIP-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + NOTIFICATION-TYPE, + Unsigned32, + Integer32, + Counter32, + mib-2 + FROM SNMPv2-SMI -- [RFC2578] + + DateAndTime, + TimeInterval, + TruthValue, + TimeStamp, + StorageType, + RowStatus + FROM SNMPv2-TC -- [RFC2579] + + OBJECT-GROUP, + MODULE-COMPLIANCE, + NOTIFICATION-GROUP + FROM SNMPv2-CONF -- [RFC2580] + + InetAddressType, + InetAddress, + InetPortNumber + FROM INET-ADDRESS-MIB -- [RFC3291] + + applIndex, + applRFC2788Group + FROM NETWORK-SERVICES-MIB -- [RFC2788] + + TripItad, + TripId, + TripAppProtocol, + TripAddressFamily, + TripCommunityId, + TripProtocolVersion, + TripSendReceiveMode + FROM TRIP-TC-MIB; -- [RFC3872] + + tripMIB MODULE-IDENTITY + LAST-UPDATED "200409020000Z" -- Sep 02, 2004 + ORGANIZATION "IETF IPTel Working Group. + + + +Zinman, et al. Standards Track [Page 7] + +RFC 3872 MIB for TRIP September 2004 + + + Mailing list: iptel@lists.bell-labs.com" + + CONTACT-INFO + "Co-editor David Zinman + postal: 265 Ridley Blvd. + Toronto ON, M5M 4N8 + Canada + email: dzinman@rogers.com + phone: +1 416 433 4298 + + Co-editor: David Walker + Sedna Wireless Inc. + postal: 495 March Road, Suite 500 + Ottawa, ON K2K 3G1 + Canada + email: david.walker@sedna-wireless.com + phone: +1 613 878 8142 + + Co-editor Jianping Jiang + Syndesis Limited + postal: 30 Fulton Way + Richmond Hill, ON L4B 1J5 + Canada + + email: jjiang@syndesis.com + phone: +1 905 886-7818 x2515 + " + DESCRIPTION + "The MIB module describing Telephony Routing over IP + (TRIP). TRIP is a policy driven inter-administrative + domain protocol for advertising the reachability of + telephony destinations between location servers (LS), and + for advertising attributes of the routes to those + destinations. + + Copyright (C) The Internet Society (2004). This version of + this MIB module is part of RFC 3872, see the RFC itself + for full legal notices." + REVISION "200409020000Z" -- Sep 02, 2004 + DESCRIPTION + "The initial version, Published as RFC 3872." + ::= { mib-2 116 } + + tripMIBNotifications OBJECT IDENTIFIER ::= { tripMIB 0 } + tripMIBObjects OBJECT IDENTIFIER ::= { tripMIB 1 } + tripMIBConformance OBJECT IDENTIFIER ::= { tripMIB 2 } + tripMIBNotifObjects OBJECT IDENTIFIER ::= { tripMIB 3 } + + + + +Zinman, et al. Standards Track [Page 8] + +RFC 3872 MIB for TRIP September 2004 + + + tripMIBCompliances OBJECT IDENTIFIER ::= + { tripMIBConformance 1 } + tripMIBGroups OBJECT IDENTIFIER ::= + { tripMIBConformance 2 } + + -- + -- tripCfgTable + -- + tripCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the common configuration objects + applicable to all TRIP applications referenced by the + applIndex. Each row represents those objects for a + particular TRIP LS present in this system. The + instances of TRIP LS's are uniquely identified by the + applIndex. The objects in this table SHOULD be + nonVolatile and survive a reboot." + ::= { tripMIBObjects 1 } + + tripCfgEntry OBJECT-TYPE + SYNTAX TripCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row of common configuration." + INDEX { applIndex } + ::= { tripCfgTable 1 } + + TripCfgEntry ::= + SEQUENCE { + tripCfgProtocolVersion TripProtocolVersion, + tripCfgItad TripItad, + tripCfgIdentifier TripId, + tripCfgAdminStatus INTEGER, + tripCfgOperStatus INTEGER, + tripCfgAddrIAddrType InetAddressType, + tripCfgAddr InetAddress, + tripCfgPort InetPortNumber, + tripCfgMinItadOriginationInterval Unsigned32, + tripCfgMinRouteAdvertisementInterval Unsigned32, + tripCfgMaxPurgeTime Unsigned32, + tripCfgDisableTime Unsigned32, + tripCfgSendReceiveMode TripSendReceiveMode, + tripCfgStorage StorageType + } + + + +Zinman, et al. Standards Track [Page 9] + +RFC 3872 MIB for TRIP September 2004 + + + tripCfgProtocolVersion OBJECT-TYPE + SYNTAX TripProtocolVersion + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object will reflect the version of TRIP + supported by this system. It follows the same + format as TRIP version information contained + in the TRIP messages generated by this TRIP entity." + REFERENCE + "RFC 3219, section 4.2." + ::= { tripCfgEntry 1 } + + tripCfgItad OBJECT-TYPE + SYNTAX TripItad + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Internet Telephony Administrative domain (ITAD) + of this LS." + ::= { tripCfgEntry 2 } + + tripCfgIdentifier OBJECT-TYPE + SYNTAX TripId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object that identifies this TRIP Client." + ::= { tripCfgEntry 3 } + + tripCfgAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired TRIP state. + + up(1) : Set the application to normal operation. + + down(2): Set the application to a state where it will + not process TRIP messages. + + Setting this object should be reflected in + tripCfgOperStatus. If an unknown error occurs + tripCfgOperStatus will return unknown(0)." + + + +Zinman, et al. Standards Track [Page 10] + +RFC 3872 MIB for TRIP September 2004 + + + ::= { tripCfgEntry 4 } + + tripCfgOperStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(0), + up(1), + down(2), + faulty(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of the TRIP protocol. + + unknown(0): The operating status of the application is + unknown. + + up(1): The application is operating normally, and + is ready to process (receive and issue) TRIP + requests and responses. + + down(2): The application is currently not processing + TRIP messages. This occurs if the TRIP + application is in an initialization state or + if tripCfgAdminStatus is set to down(2). + + faulty(3): The application is not operating normally due + to a fault in the system. + + If tripCfgAdminStatus is down(2) then tripOperStatus SHOULD + be down(2). If tripAdminStatus is changed to up(1) then + tripOperStatus SHOULD change to up(1) if there is no + fault that prevents the TRIP protocol from moving to the + up(1) state." + ::= { tripCfgEntry 5 } + + tripCfgAddrIAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of Inet Address of the tripAddr." + REFERENCE + "RFC 3291, section 3." + ::= { tripCfgEntry 6 } + + tripCfgAddr OBJECT-TYPE + SYNTAX InetAddress + + + +Zinman, et al. Standards Track [Page 11] + +RFC 3872 MIB for TRIP September 2004 + + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The network address of the local LS that the peer + connects to. The type of address depends on the object + tripCfgAddrIAddrType. The type of this address is + determined by the value of the + tripCfgAddrIAddrType object." + REFERENCE + "RFC 3291, section 3." + ::= { tripCfgEntry 7 } + + tripCfgPort OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The local tcp/udp port on the local LS that the peer + connects to." + ::= { tripCfgEntry 8 } + + tripCfgMinItadOriginationInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + UNITS "Seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum amount of time that MUST elapse between + advertisement of the update message that reports changes + within the LS's own ITAD." + DEFVAL { 30 } + ::= { tripCfgEntry 9 } + + tripCfgMinRouteAdvertisementInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + UNITS "Seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies minimal interval between successive + advertisements to a particular destination from an LS." + DEFVAL { 30 } + ::= { tripCfgEntry 10 } + + tripCfgMaxPurgeTime OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + UNITS "Seconds" + MAX-ACCESS read-write + + + +Zinman, et al. Standards Track [Page 12] + +RFC 3872 MIB for TRIP September 2004 + + + STATUS current + DESCRIPTION + "Indicates the interval that the LS MUST maintain routes + marked as withdrawn in its database." + DEFVAL { 10 } + ::= { tripCfgEntry 11 } + + tripCfgDisableTime OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + UNITS "Seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the interval that the TRIP module of the + LS MUST be disabled while routes originated by this + LS with high sequence numbers can be removed." + DEFVAL { 180 } + ::= { tripCfgEntry 12 } + + tripCfgSendReceiveMode OBJECT-TYPE + SYNTAX TripSendReceiveMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational mode of the TRIP entity running on this + system." + ::= { tripCfgEntry 13 } + + tripCfgStorage OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The storage type for this conceptual row. Conceptual rows + having the value 'permanent' need not allow write-access + to any columnar objects in the row." + DEFVAL { nonVolatile } + ::= { tripCfgEntry 14 } + + -- + -- TripRouteTypeTable + -- + + tripRouteTypeTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripRouteTypeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + + + +Zinman, et al. Standards Track [Page 13] + +RFC 3872 MIB for TRIP September 2004 + + + "The TRIP peer Route Type table contains one entry per + supported protocol - address family pair. The objects in + this table are volatile and are refreshed after a reboot." + ::= { tripMIBObjects 2 } + + tripRouteTypeEntry OBJECT-TYPE + SYNTAX TripRouteTypeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing information about the route type + that a particular TRIP entity supports. Each entry + represents information about either the local or a remote + LS peer. The object tripRouteTypePeer is used to + distinguish this. In the case of a local LS, the + address/port information will reflect the values + configured in tripCfgTable. In the case of a remote + peer, the address/port information will reflect the + values of an entry in the tripPeerTable. + + Implementation need to be aware that if the size of + tripRouteTypeAddr exceeds 111 sub-IDs, then OIDs of column + instances in this table will have more than 128 sub-IDs + and cannot be accessed using SNMPv1, SNMPv2c, or snmpv3." + INDEX { applIndex, + tripRouteTypeAddrInetType, + tripRouteTypeAddr, + tripRouteTypePort, + tripRouteTypeProtocolId, + tripRouteTypeAddrFamilyId } + ::= { tripRouteTypeTable 1 } + + TripRouteTypeEntry ::= SEQUENCE { + tripRouteTypeAddrInetType InetAddressType, + tripRouteTypeAddr InetAddress, + tripRouteTypePort InetPortNumber, + tripRouteTypeProtocolId TripAppProtocol, + tripRouteTypeAddrFamilyId TripAddressFamily, + tripRouteTypePeer INTEGER + } + + tripRouteTypeAddrInetType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of Inet Address of the tripRouteTypeAddr." + REFERENCE + + + +Zinman, et al. Standards Track [Page 14] + +RFC 3872 MIB for TRIP September 2004 + + + "RFC 3291, section 3." + ::= { tripRouteTypeEntry 1 } + + tripRouteTypeAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The network address of this entry's TRIP peer LS. The + type of this address is determined by the value of the + tripRouteTypeAddrInetType object." + REFERENCE + "RFC 3291, section 3." + ::= { tripRouteTypeEntry 2 } + + tripRouteTypePort OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The port for the TCP connection between this and + an associated TRIP peer." + ::= { tripRouteTypeEntry 3 } + + tripRouteTypeProtocolId OBJECT-TYPE + SYNTAX TripAppProtocol + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The object identifier of a protocol that the associated + peer is using." + ::= { tripRouteTypeEntry 4 } + + tripRouteTypeAddrFamilyId OBJECT-TYPE + SYNTAX TripAddressFamily + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The object identifier of an address family that the + associated peer belongs to." + ::= { tripRouteTypeEntry 5 } + + tripRouteTypePeer OBJECT-TYPE + SYNTAX INTEGER { local(1), remote(2) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies whether this entry is + + + +Zinman, et al. Standards Track [Page 15] + +RFC 3872 MIB for TRIP September 2004 + + + associated with a 'local' or 'remote' LS peer." + ::= { tripRouteTypeEntry 6 } + + -- + -- tripSupportedCommunityTable + -- + + tripSupportedCommunityTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripSupportedCommunityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of TRIP communities that this LS supports. A + TRIP community is a group of destinations that share + common properties. + + The TRIP Supported Communities entry is used to group + destinations so that the routing decision can be based + on the identity of the group." + REFERENCE + "RFC 3219, section 5.9" + ::= { tripMIBObjects 3 } + + tripSupportedCommunityEntry OBJECT-TYPE + SYNTAX TripSupportedCommunityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry containing information about a community. A TRIP + community is a group of destinations that share some + common property. This attribute is used so that routing + decisions can be based on the identity of the group." + INDEX { applIndex, tripSupportedCommunityId } + ::= { tripSupportedCommunityTable 1 } + + TripSupportedCommunityEntry ::= SEQUENCE { + tripSupportedCommunityId TripCommunityId, + tripSupportedCommunityItad TripItad, + tripSupportedCommunityStorage StorageType, + tripSupportedCommunityRowStatus RowStatus + } + + tripSupportedCommunityId OBJECT-TYPE + SYNTAX TripCommunityId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identifier of the supported Community." + + + +Zinman, et al. Standards Track [Page 16] + +RFC 3872 MIB for TRIP September 2004 + + + ::= { tripSupportedCommunityEntry 1 } + + tripSupportedCommunityItad OBJECT-TYPE + SYNTAX TripItad + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ITAD of the community." + ::= { tripSupportedCommunityEntry 2 } + + tripSupportedCommunityStorage OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row. Conceptual + rows having the value 'permanent' need not allow write- + access to any columnar objects in the row. It is not a + requirement that this storage be non volatile." + DEFVAL { nonVolatile } + ::= { tripSupportedCommunityEntry 3 } + + tripSupportedCommunityRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of the entry. This object is REQUIRED + to create or delete rows by a manager. A value for + tripSupportedCommunityItad MUST be set for row creation + to be successful. If the instance already exists for a + particular applIndex, the row create operation will + fail. + + The value of this object has no effect on whether + other objects in this conceptual row can be modified." + ::= { tripSupportedCommunityEntry 4 } + + -- + -- TripPeerTable + -- + tripPeerTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The TRIP peer table. This table contains one entry per + TRIP peer, and information about the connection with + + + +Zinman, et al. Standards Track [Page 17] + +RFC 3872 MIB for TRIP September 2004 + + + the peer." + ::= { tripMIBObjects 4 } + + tripPeerEntry OBJECT-TYPE + SYNTAX TripPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry containing information about the connection with + a TRIP peer. + + Implementation need to be aware that if the size of + tripPeerRemoteAddr exceeds 113 sub-IDs, then OIDs of + column instances in this table will have more than 128 + sub-IDs and cannot be accessed using SNMPv1, SNMPv2c, or + snmpv3." + INDEX { applIndex, + tripPeerRemoteAddrInetType, + tripPeerRemoteAddr, + tripPeerRemotePort } + ::= {tripPeerTable 1} + + TripPeerEntry ::= SEQUENCE { + tripPeerRemoteAddrInetType InetAddressType, + tripPeerRemoteAddr InetAddress, + tripPeerRemotePort InetPortNumber, + tripPeerIdentifier TripId, + tripPeerState INTEGER, + tripPeerAdminStatus INTEGER, + tripPeerNegotiatedVersion TripProtocolVersion, + tripPeerSendReceiveMode TripSendReceiveMode, + tripPeerRemoteItad TripItad, + tripPeerConnectRetryInterval Unsigned32, + tripPeerMaxRetryInterval Unsigned32, + tripPeerHoldTime Unsigned32, + tripPeerKeepAlive Unsigned32, + tripPeerHoldTimeConfigured Unsigned32, + tripPeerKeepAliveConfigured Unsigned32, + tripPeerMaxPurgeTime Unsigned32, + tripPeerDisableTime Unsigned32, + tripPeerLearned TruthValue, + tripPeerStorage StorageType, + tripPeerRowStatus RowStatus + } + + tripPeerRemoteAddrInetType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + + + +Zinman, et al. Standards Track [Page 18] + +RFC 3872 MIB for TRIP September 2004 + + + STATUS current + DESCRIPTION + "The type of Inet Address of the tripPeerRemoteAddr." + REFERENCE + "RFC 3291, section 3." + ::= { tripPeerEntry 1 } + + tripPeerRemoteAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP address of this entry's TRIP peer LS. The type of + this address is determined by the value of the + tripPeerRemoteAddrInetType object." + REFERENCE + "RFC 3291, section 3." + ::= { tripPeerEntry 2 } + + tripPeerRemotePort OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The remote port for the TCP connection between the + TRIP peers." + ::= { tripPeerEntry 3 } + + tripPeerIdentifier OBJECT-TYPE + SYNTAX TripId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TRIP identifier of the peer." + ::= { tripPeerEntry 4 } + + tripPeerState OBJECT-TYPE + SYNTAX INTEGER { + idle(1), + connect(2), + active(3), + openSent(4), + openConfirm(5), + established(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + +Zinman, et al. Standards Track [Page 19] + +RFC 3872 MIB for TRIP September 2004 + + + "TRIP Peer Finite State Machine state. + + idle(1) : The initial state. Local LS refuses all + incoming connections. No application + resources are allocated to processing + information about the remote peer. + + connect(2) : Local LS waiting for a transport + protocol connection to be completed to + the peer, and is listening for inbound + transport connections from the peer. + + active(3) : Local LS is listening for an inbound + connection from the peer, but is not in + the process of initiating a connection + to the remote peer. + + openSent(4) : Local LS has sent an OPEN message to its + peer and is waiting for an OPEN message + from the remote peer. + + openConfirm(5): Local LS has sent an OPEN message to the + remote peer, received an OPEN message from + the remote peer, and sent a KEEPALIVE + message in response to the OPEN. The local + LS is now waiting for a KEEPALIVE message + or a NOTIFICATION message in response to + its OPEN message. + + established(6): LS can exchange UPDATE, NOTIFICATION, and + KEEPALIVE messages with its peer." + ::= { tripPeerEntry 5 } + + tripPeerAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to affect the TRIP connection + state. + + up(1) : Allow a connection with the peer LS. + + down(2) : disconnect the connection from the peer LS and + do not allow any further connections to this + + + +Zinman, et al. Standards Track [Page 20] + +RFC 3872 MIB for TRIP September 2004 + + + peer. + + If this value is set to down(2) then tripPeerState will + have the value of idle(1)." + DEFVAL { up } + ::= { tripPeerEntry 6 } + + tripPeerNegotiatedVersion OBJECT-TYPE + SYNTAX TripProtocolVersion + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The negotiated version of TRIP running between this + local entity and this peer." + ::= { tripPeerEntry 7 } + + tripPeerSendReceiveMode OBJECT-TYPE + SYNTAX TripSendReceiveMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational mode of this peer." + ::= { tripPeerEntry 8 } + + tripPeerRemoteItad OBJECT-TYPE + SYNTAX TripItad + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Internet Telephony Administrative domain of + this peer." + ::= { tripPeerEntry 9 } + + tripPeerConnectRetryInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the initial amount of time that will elapse + between connection retry. This value SHOULD double + after each attempt up to the value of + tripPeerMaxRetryInterval. This value MUST always be less + than or equal to the value of tripPeerMaxRetryInterval. + Attempts to set this value higher than the max retry + will not be allowed." + DEFVAL { 120 } + ::= { tripPeerEntry 10 } + + + +Zinman, et al. Standards Track [Page 21] + +RFC 3872 MIB for TRIP September 2004 + + + tripPeerMaxRetryInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the maximum amount of time that will elapse + between connection retries. Once the value of + tripPeerConnectRetryInterval has reached this value, no + more retries will be attempted. Attempts to set this + value lower than the retry interval SHOULD not be + allowed." + DEFVAL { 360 } + ::= { tripPeerEntry 11 } + + tripPeerHoldTime OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + UNITS "Seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time interval in seconds for the hold timer that + is established with the peer. The value of this object + is the smaller of the values in + tripPeerHoldTimeConfigured and the hold time received + in the open message." + ::= { tripPeerEntry 12 } + + tripPeerKeepAlive OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + UNITS "Seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the amount of time that MUST elapse between + keep alive messages. This value is negotiated with the + remote when a connection is established." + ::= { tripPeerEntry 13 } + + tripPeerHoldTimeConfigured OBJECT-TYPE + SYNTAX Unsigned32 (0 | 3..65535) + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the maximum time that MAY elapse between the + receipt of successive keepalive or update message. A value + of 0 means that keepalive or update messages will not be + + + +Zinman, et al. Standards Track [Page 22] + +RFC 3872 MIB for TRIP September 2004 + + + sent." + DEFVAL { 240 } + ::= { tripPeerEntry 14 } + + tripPeerKeepAliveConfigured OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the amount of time that MUST elapse between + keep alive messages." + DEFVAL { 30 } + ::= { tripPeerEntry 15 } + + tripPeerMaxPurgeTime OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the interval that the LS MUST maintain routes + marked as withdrawn in its database." + DEFVAL { 10 } + ::= { tripPeerEntry 16 } + + tripPeerDisableTime OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicate the interval that the TRIP module of the remote + peer LS MUST be disabled while routes originated by the + local LS with high sequence numbers can be removed." + DEFVAL { 180 } + ::= { tripPeerEntry 17 } + + tripPeerLearned OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether this entry was learned or + configured." + DEFVAL { false } + ::= { tripPeerEntry 18 } + + + + +Zinman, et al. Standards Track [Page 23] + +RFC 3872 MIB for TRIP September 2004 + + + tripPeerStorage OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row. Conceptual + rows having the value 'permanent' need not allow write- + access to any columnar objects in the row. It is not a + requirement that this storage be non volatile." + DEFVAL { nonVolatile } + ::= { tripPeerEntry 19 } + + tripPeerRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of the entry. This object is REQUIRED to + create or delete rows remotely by a manager. If the + instance already exists for a particular applIndex, the + row create operation will fail. + + The value of this object has no effect on whether + other objects in this conceptual row can be modified. + + Entries in this table can be learned by the TRIP + application, or provisioned through this table." + ::= { tripPeerEntry 20 } + + -- + -- TripPeerStatisticsTable + -- + + tripPeerStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripPeerStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The TRIP peer stats table. This table contains one + entry per remote TRIP peer, and statistics related to the + connection with the remote peer. The objects in this + table are volatile." + ::= { tripMIBObjects 5 } + + tripPeerStatisticsEntry OBJECT-TYPE + SYNTAX TripPeerStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + + + +Zinman, et al. Standards Track [Page 24] + +RFC 3872 MIB for TRIP September 2004 + + + DESCRIPTION + "Entry containing information about the connection with + a TRIP peer." + AUGMENTS { tripPeerEntry } + ::= { tripPeerStatisticsTable 1 } + + TripPeerStatisticsEntry ::= SEQUENCE { + tripPeerInUpdates Counter32, + tripPeerOutUpdates Counter32, + tripPeerInTotalMessages Counter32, + tripPeerOutTotalMessages Counter32, + tripPeerFsmEstablishedTransitions Counter32, + tripPeerFsmEstablishedTime DateAndTime, + tripPeerInUpdateElapsedTime TimeInterval, + tripPeerStateChangeTime TimeStamp + } + + tripPeerInUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of TRIP update messages received from this + remote peer since the last restart of this location + server." + ::= { tripPeerStatisticsEntry 1 } + + tripPeerOutUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of TRIP update messages sent to this remote + peer since the last restart of this LS." + ::= { tripPeerStatisticsEntry 2 } + + tripPeerInTotalMessages OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of TRIP messages received from the + remote peer on this connection since the last restart + of this LS." + ::= { tripPeerStatisticsEntry 3 } + + tripPeerOutTotalMessages OBJECT-TYPE + SYNTAX Counter32 + + + +Zinman, et al. Standards Track [Page 25] + +RFC 3872 MIB for TRIP September 2004 + + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of outgoing TRIP messages sent to the + remote peer since the last restart of this LS." + ::= { tripPeerStatisticsEntry 4 } + + tripPeerFsmEstablishedTransitions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the remote peer has transitioned + into the established state since the last restart of this + LS." + ::= { tripPeerStatisticsEntry 5 } + + tripPeerFsmEstablishedTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the time and date that this remote peer entered + the 'established' state." + ::= { tripPeerStatisticsEntry 6 } + + tripPeerInUpdateElapsedTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Elapsed time in hundredths of seconds since the last + TRIP update message was received from this remote peer." + ::= { tripPeerStatisticsEntry 7 } + + tripPeerStateChangeTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the last state change of + tripPeerState took place." + ::= { tripPeerStatisticsEntry 8 } + + -- TRIP Received Route Table. This table contains + -- all routes from all sources. Each entry consists + -- of a route and its associated path attributes. + + + + +Zinman, et al. Standards Track [Page 26] + +RFC 3872 MIB for TRIP September 2004 + + + tripRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The TRIP route table containing information about + reachable routes that are to be added to service by the + receiving LS. The objects in this table are volatile + and are refreshed when this LS rediscovers its route + table." + ::= { tripMIBObjects 6 } + + tripRouteEntry OBJECT-TYPE + SYNTAX TripRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a route to a called destination." + INDEX { applIndex, + tripRouteAppProtocol, + tripRouteAddressFamily, + tripRouteAddress, + tripRoutePeer + } + ::= { tripRouteTable 1 } + + TripRouteEntry ::= SEQUENCE { + tripRouteAppProtocol TripAppProtocol, + tripRouteAddressFamily TripAddressFamily, + tripRouteAddress OCTET STRING, + tripRoutePeer TripId, + tripRouteTRIBMask BITS, + tripRouteAddressSequenceNumber Unsigned32, + tripRouteAddressOriginatorId TripId, + tripRouteNextHopServerIAddrType InetAddressType, + tripRouteNextHopServer InetAddress, + tripRouteNextHopServerPort InetPortNumber, + tripRouteNextHopServerItad TripItad, + tripRouteMultiExitDisc Unsigned32, + tripRouteLocalPref Unsigned32, + tripRouteAdvertisementPath OCTET STRING, + tripRouteRoutedPath OCTET STRING, + tripRouteAtomicAggregate TruthValue, + tripRouteUnknown OCTET STRING, + tripRouteWithdrawn TruthValue, + tripRouteConverted TruthValue, + tripRouteReceivedTime TimeStamp + } + + + +Zinman, et al. Standards Track [Page 27] + +RFC 3872 MIB for TRIP September 2004 + + + tripRouteAppProtocol OBJECT-TYPE + SYNTAX TripAppProtocol + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The protocol for which this entry of the routing table + is maintained." + ::= { tripRouteEntry 1 } + + tripRouteAddressFamily OBJECT-TYPE + SYNTAX TripAddressFamily + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the type of address for the destination + route." + ::= { tripRouteEntry 2 } + + tripRouteAddress OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1..105)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is the address (prefix) of the family type given + by Address Family of the destination. It is the prefix + of addresses reachable from this gateway via the next + hop server. The SIZE value of 105 has been assigned due + to the sub identifier of object types length limitation + as defined in SMIv2." + REFERENCE + "RFC 3219, section 5.1.1.1." + ::= { tripRouteEntry 3 } + + tripRoutePeer OBJECT-TYPE + SYNTAX TripId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The identifier of the peer where the route information + was learned." + ::= { tripRouteEntry 4 } + + tripRouteTRIBMask OBJECT-TYPE + SYNTAX BITS { + adjTribIns(0), + extTrib(1), + locTrib(2), + adjTribOut(3) + + + +Zinman, et al. Standards Track [Page 28] + +RFC 3872 MIB for TRIP September 2004 + + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates which Telephony Routing Information Base (TRIB) + this entry belongs to. This is + a bit-map of possible types. If the bit has a value of + 1, then the entry is a member of the corresponding TRIB + type. If the bit has a value of 0 then the entry is not + a member of the TRIP type. The various bit positions + are: + + 0 adjTribIns The entry is of type adj-TRIBs-ins, + stores routing information that has + been learned from inbound UPDATE + messages. + 1 extTrib The entry is of type ext-TRIB, the + best route for a given destination. + 2 locTrib The entry is of type loc-TRIB contains + the local TRIP routing information + that the LS has selected. + 3 adjTribOut The entry is of type adj-TRIBs-out, + stores the information that the local + LS has selected for advertisement to + its external peers." + REFERENCE + "RFC 3291, section 3.5." + ::= { tripRouteEntry 5 } + + tripRouteAddressSequenceNumber OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the version of the destination route + originated by the LS identified by + tripRouteAddressOriginatorId intra-domain attribute." + ::= { tripRouteEntry 6 } + + tripRouteAddressOriginatorId OBJECT-TYPE + SYNTAX TripId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is an intra-domain attribute indicating the + internal LS that originated the route into the ITAD." + ::= { tripRouteEntry 7 } + + + + +Zinman, et al. Standards Track [Page 29] + +RFC 3872 MIB for TRIP September 2004 + + + tripRouteNextHopServerIAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of Inet Address of the tripRouteNextHopServer." + REFERENCE + "RFC 3291, section 3." + ::= { tripRouteEntry 8 } + + tripRouteNextHopServer OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the next hop that messages of a given protocol + destined for tripRouteAddress SHOULD be sent to. The type + of this address is determined by the value of the + tripRouteNextHopServerIAddrType object." + ::= { tripRouteEntry 9 } + + tripRouteNextHopServerPort OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port of the next hop server that this route + will use." + ::= { tripRouteEntry 10 } + + tripRouteNextHopServerItad OBJECT-TYPE + SYNTAX TripItad + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the domain of the next hop." + ::= { tripRouteEntry 11 } + + tripRouteMultiExitDisc OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Multiple Exit Discriminator allows an LS to + discriminate between, and indicate preference for, + otherwise similar routes to a neighbouring domain. + A higher value represents a more preferred routing + object." + + + +Zinman, et al. Standards Track [Page 30] + +RFC 3872 MIB for TRIP September 2004 + + + REFERENCE + "RFC 3219, section 5.8" + ::= { tripRouteEntry 12 } + + tripRouteLocalPref OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicated the local LS's degree of preference for an + advertised route destination." + REFERENCE + "RFC 3219, section 4.3.4.7" + ::= { tripRouteEntry 13 } + + tripRouteAdvertisementPath OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(4..252)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identifies the sequence of domains through which this + advertisement has passed. + + This object is probably best represented as sequence of + TripItads. For SMI compatibility, though, it is + represented as an OCTET STRING. This object is a sequence + of ITADs where each set of 4 octets corresponds to a TRIP + ITAD in network byte order." + REFERENCE + "RFC 3219, section 4.3.4.4" + ::= { tripRouteEntry 14 } + + tripRouteRoutedPath OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(4..252)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identifies the ITADs through which messages sent using + this route would pass. These are a subset of + tripRouteAdvertisementPath. + + This object is probably best represented as sequence of + TripItads. For SMI compatibility, though, it is + represented as OCTET STRING. This object is a sequence + of ITADs where each set of 4 octets corresponds to a TRIP + ITAD in network byte order." + REFERENCE + "RFC 3219, section 4.3.4.5" + + + +Zinman, et al. Standards Track [Page 31] + +RFC 3872 MIB for TRIP September 2004 + + + ::= { tripRouteEntry 15 } + + tripRouteAtomicAggregate OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates that a route MAY traverse domains not listed + in tripRouteRoutedPath. If an LS selects the less + specific route from a set of overlapping routes, then + this value returns TRUE." + REFERENCE + "RFC 3219, section 4.3.4.6" + ::= { tripRouteEntry 16 } + + tripRouteUnknown OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains one or more attributes that were not + understood, and because they were transitive, were dropped + during aggregation. They take the format of a triple + <attribute type, attribute length, attribute value>, of + variable length. If no attributes were dropped, this + returns an OCTET STRING of size 0." + REFERENCE + "RFC 3219, sections 4.3.1, 4.3.2.3" + ::= { tripRouteEntry 17 } + + tripRouteWithdrawn OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if this route is to be removed from service + by the receiving LS." + ::= { tripRouteEntry 18 } + + tripRouteConverted OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if this route has been converted to a + different application protocol than it had originally." + ::= { tripRouteEntry 19 } + + + + +Zinman, et al. Standards Track [Page 32] + +RFC 3872 MIB for TRIP September 2004 + + + tripRouteReceivedTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this route was received." + ::= { tripRouteEntry 20 } + + -- + -- TRIP Received Route Community Table. + -- + + tripRouteCommunityTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripRouteCommunityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing a list of TRIP communities associated + with a route. Each instance of tripRouteTypeEntry that has + the tripRouteTypePeer object set to remote(2) has an + instance in the tripRouteTable as a parent. The objects + in this table are volatile and are refreshed after a + reboot." + REFERENCE + "RFC 3219, section 5.9." + ::= { tripMIBObjects 7 } + + tripRouteCommunityEntry OBJECT-TYPE + SYNTAX TripRouteCommunityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about communities associated with a route. + An entry with a tripRouteAddress of 00 and a + tripRoutePeer of 0 refers to the local LS." + INDEX { applIndex, + tripRouteAppProtocol, + tripRouteAddressFamily, + tripRouteAddress, + tripRoutePeer, + tripRouteCommunityId + } + ::= { tripRouteCommunityTable 1 } + + TripRouteCommunityEntry ::= SEQUENCE { + tripRouteCommunityId TripCommunityId, + tripRouteCommunityItad TripItad + } + + + +Zinman, et al. Standards Track [Page 33] + +RFC 3872 MIB for TRIP September 2004 + + + tripRouteCommunityId OBJECT-TYPE + SYNTAX TripCommunityId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The community identifier." + ::= { tripRouteCommunityEntry 1 } + + tripRouteCommunityItad OBJECT-TYPE + SYNTAX TripItad + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ITAD associated with this community." + ::= { tripRouteCommunityEntry 2 } + + -- + -- tripItadTopologyTable + -- + + tripItadTopologyTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripItadTopologyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The sequence of link connections between peers within an + ITAD. The objects in this table are volatile and are + refreshed after a reboot." + ::= { tripMIBObjects 8 } + + tripItadTopologyEntry OBJECT-TYPE + SYNTAX TripItadTopologyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a peer of the LS identified by + tripItadTopologyOrigId." + INDEX { applIndex, tripItadTopologyOrigId } + ::= { tripItadTopologyTable 1 } + + TripItadTopologyEntry ::= SEQUENCE { + tripItadTopologyOrigId TripId, + tripItadTopologySeqNum Unsigned32 + } + + tripItadTopologyOrigId OBJECT-TYPE + SYNTAX TripId + MAX-ACCESS not-accessible + + + +Zinman, et al. Standards Track [Page 34] + +RFC 3872 MIB for TRIP September 2004 + + + STATUS current + DESCRIPTION + "Indicates the internal LS that originated the ITAD + topology information into the ITAD." + ::= { tripItadTopologyEntry 1 } + + tripItadTopologySeqNum OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the version of the ITAD topology originated + by the LS identified by tripItadTopologyOrigId." + ::= { tripItadTopologyEntry 2 } + + -- + -- tripItadTopologyIdTable + -- + + tripItadTopologyIdTable OBJECT-TYPE + SYNTAX SEQUENCE OF TripItadTopologyIdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of other LS's within the ITAD domain that the + LS identified by tripItadTopologyOrigId is currently + peering. Each instance of tripItadTopologyIdEntry has an + instance in the tripItadTopologyTable as a parent. The + objects in this table are volatile and are refreshed + after a reboot." + ::= { tripMIBObjects 9 } + + tripItadTopologyIdEntry OBJECT-TYPE + SYNTAX TripItadTopologyIdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a peer to the LS identified by + tripItadTopologyOrigId." + INDEX { applIndex, + tripItadTopologyOrigId, + tripItadTopologyId } + ::= { tripItadTopologyIdTable 1 } + + TripItadTopologyIdEntry ::= SEQUENCE { + tripItadTopologyId TripId + } + + + + +Zinman, et al. Standards Track [Page 35] + +RFC 3872 MIB for TRIP September 2004 + + + tripItadTopologyId OBJECT-TYPE + SYNTAX TripId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index into this entry. Indicates the other location + servers within the ITAD domain that this LS identified + by tripItadTopologyOrigId is currently peering." + ::= { tripItadTopologyIdEntry 1 } + + -- + -- Notification objects + -- + + tripNotifApplIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This object contains the application Index. It is used + to bind this notification with a specific instance of + TRIP entity." + REFERENCE + "RFC 2788, section 3." + ::= { tripMIBNotifObjects 1 } + + tripNotifPeerAddrInetType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The type of Inet Address of the tripNotifPeerAddr." + REFERENCE + "RFC 3291, section 3." + ::= { tripMIBNotifObjects 2 } + + tripNotifPeerAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The IP address of this entry's TRIP peer LS. This object + contains the value of tripPeerRemoteAddr. The type of this + address is determined by the value of the + tripNotifPeerAddrInetType object." + REFERENCE + "RFC 3291, section 3." + ::= { tripMIBNotifObjects 3 } + + + +Zinman, et al. Standards Track [Page 36] + +RFC 3872 MIB for TRIP September 2004 + + + tripNotifPeerErrCode OBJECT-TYPE + SYNTAX INTEGER { + messageHeader(1), + openMessage(2), + updateMessage(3), + holdTimerExpired(4), + finiteStateMachine(5), + cease(6), + tripNotification(7) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Notification message of TRIP error. The meaning of this + value is applicable to the following functions: + + messageHeader(1) + - All errors detected while processing the TRIP message + header. + + openMessage(2) + - All errors detected while processing the OPEN message. + + updateMessage(3) + - All errors detected while processing the UPDATE + message. + + holdTimerExpired(4) + - A notification generated when the hold timer expires. + + finiteStateMachine(5) + - All errors detected by the TRIP Finite State Machine. + + cease(6) + - Any fatal error condition that the rest of the values + do not cover. + + tripNotification(7) + - Any error encountered while sending a notification + message." + ::= { tripMIBNotifObjects 4 } + + tripNotifPeerErrSubcode OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The sub error code associated with error code. The + + + +Zinman, et al. Standards Track [Page 37] + +RFC 3872 MIB for TRIP September 2004 + + + meaning of this value is dependent on the value of + tripNotifPeerErrCode. + + Message Header (1) Error Subcodes: + 1 - Bad Message Length. + 2 - Bad Message Type. + + OPEN Message (2) Error Subcodes: + 1 - Unsupported Version Number. + 2 - Bad Peer ITAD. + 3 - Bad TRIP Identifier. + 4 - Unsupported Optional Parameter. + 5 - Unacceptable Hold Time. + 6 - Unsupported Capability. + 7 - Capability Mismatch. + + UPDATE Message (3) Error Subcodes: + 1 - Malformed Attribute List. + 2 - Unrecognized Well-known Attribute. + 3 - Missing Well-known Mandatory Attribute. + 4 - Attribute Flags Error. + 5 - Attribute Length Error. + 6 - Invalid Attribute." + ::= { tripMIBNotifObjects 5 } + + -- + -- Notifications + -- + tripConnectionEstablished NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex, + tripNotifPeerAddrInetType, + tripNotifPeerAddr + } + STATUS current + DESCRIPTION + "The TRIP Connection Established event is generated when + the TRIP finite state machine enters the ESTABLISHED + state." + ::= { tripMIBNotifications 1 } + + tripConnectionDropped NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex, + tripNotifPeerAddrInetType, + tripNotifPeerAddr + } + STATUS current + DESCRIPTION + "The TRIP Connection Dropped event is generated when the + + + +Zinman, et al. Standards Track [Page 38] + +RFC 3872 MIB for TRIP September 2004 + + + TRIP finite state machine leaves the ESTABLISHED state." + ::= { tripMIBNotifications 2 } + + tripFSM NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex, + tripNotifPeerAddrInetType, + tripNotifPeerAddr, + tripNotifPeerErrCode, + tripNotifPeerErrSubcode, + tripPeerState + } + STATUS current + DESCRIPTION + "The trip FSM Event is generated when any error is + detected by the TRIP Finite State Machine." + ::= { tripMIBNotifications 3 } + + tripOpenMessageError NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex, + tripNotifPeerAddrInetType, + tripNotifPeerAddr, + tripNotifPeerErrCode, + tripNotifPeerErrSubcode, + tripPeerState + } + STATUS current + DESCRIPTION + "Errors detected while processing the OPEN message." + ::= { tripMIBNotifications 4 } + + tripUpdateMessageError NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex, + tripNotifPeerAddrInetType, + tripNotifPeerAddr, + tripNotifPeerErrCode, + tripNotifPeerErrSubcode, + tripPeerState + } + STATUS current + DESCRIPTION + "Errors detected while processing the UPDATE message." + ::= { tripMIBNotifications 5 } + + tripHoldTimerExpired NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex, + tripNotifPeerAddrInetType, + tripNotifPeerAddr, + tripNotifPeerErrCode, + + + +Zinman, et al. Standards Track [Page 39] + +RFC 3872 MIB for TRIP September 2004 + + + tripNotifPeerErrSubcode, + tripPeerState + } + STATUS current + DESCRIPTION + "The system does not receive successive messages within + the period specified by the negotiated Hold Time." + ::= { tripMIBNotifications 6 } + + tripConnectionCollision NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex } + STATUS current + DESCRIPTION + "A pair of LSs tried to simultaneously to establish a + transport connection to each other." + ::= { tripMIBNotifications 7 } + + tripCease NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex, + tripNotifPeerAddrInetType, + tripNotifPeerAddr, + tripNotifPeerErrCode, + tripNotifPeerErrSubcode, + tripPeerState + } + STATUS current + DESCRIPTION + "A TRIP peer MAY choose at any given time to close its TRIP + connection by sending this notification message. However, + the Cease notification message MUST NOT be used when a + fatal error occurs." + + ::= { tripMIBNotifications 8 } + + tripNotificationErr NOTIFICATION-TYPE + OBJECTS { tripNotifApplIndex } + STATUS current + DESCRIPTION + "Generated if there is an error detected in a TRIP + notification message sent with another cause. Note that + the TRIP notification referred to in this object is not + an SNMP notification, it is a specific message described + in the TRIP specification." + REFERENCE + "RFC 3219, section 6.4." + ::= { tripMIBNotifications 9 } + + -- + + + +Zinman, et al. Standards Track [Page 40] + +RFC 3872 MIB for TRIP September 2004 + + + -- Compliance Statements + -- + + tripMIBFullCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for TRIP entities that + implement this MIB module in read-write mode, such + that it can be used for both monitoring and configuring + the TRIP entity. + + There is one INDEX object that cannot be represented in + the form of OBJECT clauses in SMIv2, but for which there + is a compliance requirement, expressed in OBJECT clause + form in this description: + + -- OBJECT tripRouteTypeAddrInetType + -- SYNTAX InetAddressType (ipv4(1), ipv6(2), + -- ipv4z(3), ipv6z(4)) + -- DESCRIPTION + -- This MIB requires support for global and + -- non-global ipv4 and ipv6 addresses. + -- + -- OBJECT tripRouteTypeAddr + -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) + -- DESCRIPTION + -- This MIB requires support for global and + -- non-global IPv4 and IPv6 addresses. + -- + " + + MODULE -- this module + MANDATORY-GROUPS { tripConfigGroup, + tripPeerTableConfigGroup, + tripRouteGroup, + tripItadTopologyGroup, + tripPeerTableStatsGroup } + + GROUP tripNotificationGroup + DESCRIPTION + "This group is OPTIONAL. A TRIP entity can choose not to + send any notifications. If this group is implemented, + the tripNotifObjectGroup MUST also be implemented." + + GROUP tripNotifObjectGroup + DESCRIPTION + "This group is OPTIONAL. A TRIP entity can choose not to + send any notifications. If this group is implemented, + + + +Zinman, et al. Standards Track [Page 41] + +RFC 3872 MIB for TRIP September 2004 + + + the tripNotificationGroup MUST also be implemented." + + OBJECT tripSupportedCommunityRowStatus + SYNTAX RowStatus { active(1) } + WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } + DESCRIPTION + "Support for createAndWait and notInService is not + required." + + OBJECT tripPeerRowStatus + SYNTAX RowStatus { active(1) } + WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } + DESCRIPTION + "Support for createAndWait and notInService is not + required." + + MODULE NETWORK-SERVICES-MIB + MANDATORY-GROUPS { applRFC2788Group } + + ::= { tripMIBCompliances 1 } + tripMIBReadOnlyCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for TRIP entities that + implement this MIB module in read only mode. Such TRIP + entities can then only be monitored, but not be + configured via this MIB module. + + In read-only mode, the manager will not be able to add, + remove or modify rows to any table, however the TRIP + application may modify, remove or add rows to a table. + + There is one INDEX object that cannot be represented in + the form of OBJECT clauses in SMIv2, but for which there + is a compliance requirement, expressed in OBJECT clause + form in this description: + + -- OBJECT tripRouteTypeAddrInetType + -- SYNTAX InetAddressType (ipv4(1), ipv6(2), + -- ipv4z(3), ipv6z(4)) + -- DESCRIPTION + -- This MIB requires support for global and + -- non-global ipv4 and ipv6 addresses. + -- + -- OBJECT tripRouteTypeAddr + -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) + -- DESCRIPTION + -- This MIB requires support for global and + + + +Zinman, et al. Standards Track [Page 42] + +RFC 3872 MIB for TRIP September 2004 + + + -- non-global IPv4 and IPv6 addresses. + -- + " + + MODULE -- this module + MANDATORY-GROUPS { tripConfigGroup, + tripPeerTableConfigGroup, + tripRouteGroup, + tripItadTopologyGroup, + tripPeerTableStatsGroup } + + GROUP tripNotificationGroup + DESCRIPTION + "This group is OPTIONAL. A TRIP entity can choose not to + send any notifications. If this group is implemented, + the tripNotifObjectGroup MUST also be implemented." + + GROUP tripNotifObjectGroup + DESCRIPTION + "This group is OPTIONAL. A TRIP entity can choose not to + send any notifications. If this group is implemented, + the tripNotificationGroup MUST also be implemented." + OBJECT tripCfgItad + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripCfgAdminStatus + MIN-ACCESS not-accessible + DESCRIPTION + "Object is not needed when implemented in read-only mode." + + OBJECT tripCfgPort + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripCfgMinItadOriginationInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripCfgMinRouteAdvertisementInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripCfgMaxPurgeTime + + + +Zinman, et al. Standards Track [Page 43] + +RFC 3872 MIB for TRIP September 2004 + + + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripCfgDisableTime + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripCfgStorage + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripSupportedCommunityItad + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripSupportedCommunityStorage + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripSupportedCommunityRowStatus + SYNTAX RowStatus { active(1) } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, and active is the only + status that needs to be supported." + + OBJECT tripPeerAdminStatus + MIN-ACCESS not-accessible + DESCRIPTION + "Object is not needed when implemented in read-only mode." + + OBJECT tripPeerConnectRetryInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripPeerMaxRetryInterval + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripPeerHoldTimeConfigured + MIN-ACCESS read-only + + + +Zinman, et al. Standards Track [Page 44] + +RFC 3872 MIB for TRIP September 2004 + + + DESCRIPTION + "Write access is not required." + + OBJECT tripPeerKeepAliveConfigured + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripPeerMaxPurgeTime + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripPeerDisableTime + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripPeerStorage + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT tripPeerRowStatus + SYNTAX RowStatus { active(1) } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, and active is the only + status that needs to be supported." + MODULE NETWORK-SERVICES-MIB + MANDATORY-GROUPS { applRFC2788Group } + + ::= { tripMIBCompliances 2 } + + -- + -- Object and event conformance groups + -- + + tripConfigGroup OBJECT-GROUP + OBJECTS { + tripCfgProtocolVersion, + tripCfgItad, + tripCfgIdentifier, + tripCfgOperStatus, + tripCfgAdminStatus, + tripCfgAddrIAddrType, + tripCfgAddr, + tripCfgPort, + + + +Zinman, et al. Standards Track [Page 45] + +RFC 3872 MIB for TRIP September 2004 + + + tripCfgMinItadOriginationInterval, + tripCfgMinRouteAdvertisementInterval, + tripCfgMaxPurgeTime, + tripCfgDisableTime, + tripCfgSendReceiveMode, + tripCfgStorage, + tripSupportedCommunityItad, + tripSupportedCommunityStorage, + tripRouteTypePeer, + tripSupportedCommunityRowStatus + } + STATUS current + DESCRIPTION + "The global objects for configuring trip." + ::= { tripMIBGroups 1 } + + tripPeerTableConfigGroup OBJECT-GROUP + OBJECTS { + tripPeerIdentifier, + tripPeerState, + tripPeerAdminStatus, + tripPeerNegotiatedVersion, + tripPeerSendReceiveMode, + tripPeerRemoteItad, + tripPeerConnectRetryInterval, + tripPeerMaxRetryInterval, + tripPeerHoldTime, + tripPeerKeepAlive, + tripPeerHoldTimeConfigured, + tripPeerKeepAliveConfigured, + tripPeerMaxPurgeTime, + tripPeerDisableTime, + tripPeerLearned, + tripPeerStorage, + tripPeerRowStatus + } + + STATUS current + DESCRIPTION + "The global objects for configuring the TRIP peer + table." + ::= { tripMIBGroups 2 } + + tripPeerTableStatsGroup OBJECT-GROUP + OBJECTS { + tripPeerInUpdates, + tripPeerOutUpdates, + tripPeerInTotalMessages, + + + +Zinman, et al. Standards Track [Page 46] + +RFC 3872 MIB for TRIP September 2004 + + + tripPeerOutTotalMessages, + tripPeerFsmEstablishedTransitions, + tripPeerFsmEstablishedTime, + tripPeerInUpdateElapsedTime, + tripPeerStateChangeTime + } + STATUS current + DESCRIPTION + "The global statistics the TRIP peer table." + ::= { tripMIBGroups 3 } + + tripRouteGroup OBJECT-GROUP + OBJECTS { + tripRouteTRIBMask, + tripRouteAddressSequenceNumber, + tripRouteAddressOriginatorId, + tripRouteNextHopServerIAddrType, + tripRouteNextHopServer, + tripRouteNextHopServerPort, + tripRouteNextHopServerItad, + tripRouteMultiExitDisc, + tripRouteLocalPref, + tripRouteAdvertisementPath, + tripRouteRoutedPath, + tripRouteAtomicAggregate, + tripRouteUnknown, + tripRouteWithdrawn, + tripRouteConverted, + tripRouteReceivedTime, + tripRouteCommunityItad + } + + STATUS current + DESCRIPTION + "The global objects for configuring route attribute." + ::= { tripMIBGroups 4 } + tripItadTopologyGroup OBJECT-GROUP + OBJECTS { + tripItadTopologySeqNum, + tripItadTopologyId + } + STATUS current + DESCRIPTION + "The objects that define the TRIP ITAD topology." + ::= { tripMIBGroups 5 } + + tripNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + + + +Zinman, et al. Standards Track [Page 47] + +RFC 3872 MIB for TRIP September 2004 + + + tripConnectionEstablished, + tripConnectionDropped, + tripFSM, + tripOpenMessageError, + tripUpdateMessageError, + tripHoldTimerExpired, + tripConnectionCollision, + tripCease, + tripNotificationErr + } + STATUS current + DESCRIPTION + "A collection of notifications defined for TRIP." + ::= { tripMIBGroups 6 } + + tripNotifObjectGroup OBJECT-GROUP + OBJECTS { + tripNotifApplIndex, + tripNotifPeerAddrInetType, + tripNotifPeerAddr, + tripNotifPeerErrCode, + tripNotifPeerErrSubcode + } + STATUS current + DESCRIPTION + "The collection of objects that specify information for + TRIP notifications." + ::= { tripMIBGroups 7 } + +END + +7. Security Considerations + + The managed objects in this MIB module contain sensitive information + since, collectively, they allow tracing and influencing of + connections in TRIP devices and provide information of their + connection characteristics. As such, improper manipulation of the + objects represented by this MIB module MAY result in denial of + service to a large number of available routes. + + There are a number of management objects defined in this MIB module + that have a MAX-ACCESS clause of read-write and/or read-create. Such + objects MAY be considered sensitive or vulnerable in some network + environments. The support for SET operations in a non-secure + environment without proper protection can have a negative effect on + network operations. These objects include: + + + + + +Zinman, et al. Standards Track [Page 48] + +RFC 3872 MIB for TRIP September 2004 + + + tripCfgItad: + Improper setting of tripCfgItad value can make all peer + connections drop and not be re-established. + + tripCfgAdminStatus: + Improper setting of tripCfgAdminStatus from up to down will cause + the TRIP Location Server stop processing TRIP messages. + + tripCfgPort: + Improper setting of tripCfgPort can cause the failure of a peer + establishing a connection. + + tripCfgMinItadOriginationInterval, + tripCfgMinRouteAdvertisementInterval: + Improper configuration of these values MAY adversely affect local + and global convergence of the routes advertised by this TRIP + Location Server. + + tripPeerAdminStatus: + Improper setting of tripPeerAdminStatus from up to down can cause + significant disruption of the connectivity to the destination via + the applicable remote TRIP Location Server peer. + + tripPeerConnectRetryInterval,tripPeerMaxRetryInterval: + Improper configuration of these values can cause connections to be + disrupted for extremely long time periods when otherwise they + would be restored in a relatively short period of time. + + tripPeerHoldTimeConfigured, tripPeerKeepAliveConfigured: + Improper configuration of these value can make TRIP peer sessions + more fragile and less resilient to denial of service attacks. + + There are a number of managed objects in this MIB module that contain + sensitive information regarding the operation of a network. For + example, a TRIP Location Server peer's local and remote addresses + might be sensitive for ISPs who want to keep interface addresses on + TRIP Location Server confidential so as to prevent TRIP Location + Server addresses used for a denial of service attack or address + spoofing. + + Therefore, it is thus important to control even GET access to these + objects and possibly to even encrypt the values of these object when + sending them over the network via SNMP. Not all versions of SNMP + provide features for such a secure environment. + + + + + + + +Zinman, et al. Standards Track [Page 49] + +RFC 3872 MIB for TRIP September 2004 + + + SNMPv1 by itself is not a secure environment. Even if the network + itself is secure (for example by using IPSec), even then, there is no + control as to who on the secure network is allowed to access and + GET/SET (read/change/create/delete) the objects in this MIB module. + + It is RECOMMENDED that the implementers consider the security + features as provided by the SNMPv3 framework (see [RFC3410], section + 8), including full support for the SNMPv3 cryptographic mechanisms + (for authentication and privacy). + + Further, deployment of SNMP versions prior to SNMPv3 is NOT + RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to + enable cryptographic security. It is then a customer/operator + responsibility to ensure that the SNMP entity giving access to an + instance of this MIB module is properly configured to give access to + the objects only to those principals (users) that have legitimate + rights to indeed GET or SET (change/create/delete) them. + +8. References + +8.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Textual + Conventions for SMIv2", STD 58, RFC 2579, April 1999. + + [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, + "Conformance Statements for SMIv2", STD 58, RFC 2580, April + 1999. + + [RFC2788] Freed, N. and S. Kille, "Network Services Monitoring MIB", + RFC 2788, March 2000. + + [RFC3219] Rosenberg, J., Salama, H., and M. Squire, "Telephony + Routing over IP (TRIP)", RFC 3219, January 2002. + + [RFC3291] Daniele, M., Haberman, B., Routhier, S., and J. + Schoenwaelder, "Textual Conventions for Internet Network + Addresses", RFC 3291, May 2002. + + [RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder, + "Structure of Management Information Version 2 (SMIv2)", + STD 58, RFC 2578, April 1999. + + + + + + +Zinman, et al. Standards Track [Page 50] + +RFC 3872 MIB for TRIP September 2004 + + +8.2. Informative References + + [RFC1657] Willis, S., Burruss, J., and J. Chu, Ed., "Definitions of + Managed Objects for the Fourth Version of the Border + Gateway Protocol (BGP-4) using SMIv2", RFC 1657, July 1994. + + [RFC1771] Rekhter, Y. and T. Li, "Border Gateway Protocol 4 (BGP-4)", + RFC 1771, March 1995. + + [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, + "Introduction and Applicability Statements for Internet- + Standard Management Framework", RFC 3410, December 2002. + +9. Acknowledgments + + The authors wish to thank Bert Wijnen, Dan Romascanu, and Jonathan + Rosenberg for their insightful comments and suggestions. + + Thanks to Kevin Lingle for his invaluable comments, help with MIB + things and great ideas. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Zinman, et al. Standards Track [Page 51] + +RFC 3872 MIB for TRIP September 2004 + + +10. Authors' Addresses + + David Zinman + Editor + 265 Ridley Blvd + Toronto ON M5M 4N8 + Canada + + Phone: +1 416 433 4298 + EMail: dzinman@rogers.com + + + David Walker + Sedna Wireless Inc. + 495 March Road, Suite 500 + Ottawa, ON K2K 3G1 + Canada + + Phone: +1 613 878 8142 + EMail: david.walker@sedna-wireless.com + + + Jianping Jiang + Syndesis Limited + 30 Fulton Way + Richmond Hill, ON L4B 1J5 + Canada + + Phone: +1 905 886-7818 x2515 + EMail: jjiang@syndesis.com + + + + + + + + + + + + + + + + + + + + + +Zinman, et al. Standards Track [Page 52] + +RFC 3872 MIB for TRIP September 2004 + + +11. Full Copyright Statement + + Copyright (C) The Internet Society (2004). + + This document is subject to the rights, licenses and restrictions + contained in BCP 78, and except as set forth therein, the authors + retain all their rights. + + This document and the information contained herein are provided on an + "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/S HE + REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE + INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF + THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED + WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Intellectual Property + + The IETF takes no position regarding the validity or scope of any + Intellectual Property Rights or other rights that might be claimed to + pertain to the implementation or use of the technology described in + this document or the extent to which any license under such rights + might or might not be available; nor does it represent that it has + made any independent effort to identify any such rights. Information + on the IETF's procedures with respect to rights in IETF Documents can + be found in BCP 78 and BCP 79. + + Copies of IPR disclosures made to the IETF Secretariat and any + assurances of licenses to be made available, or the result of an + attempt made to obtain a general license or permission for the use of + such proprietary rights by implementers or users of this + specification can be obtained from the IETF on-line IPR repository at + http://www.ietf.org/ipr. + + The IETF invites any interested party to bring to its attention any + copyrights, patents or patent applications, or other proprietary + rights that may cover technology that may be required to implement + this standard. Please address the information to the IETF at ietf- + ipr@ietf.org. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + + +Zinman, et al. Standards Track [Page 53] + |