diff options
| author | Thomas Voss <mail@thomasvoss.com> | 2024-11-27 20:54:24 +0100 |
|---|---|---|
| committer | Thomas Voss <mail@thomasvoss.com> | 2024-11-27 20:54:24 +0100 |
| commit | 4bfd864f10b68b71482b35c818559068ef8d5797 (patch) | |
| tree | e3989f47a7994642eb325063d46e8f08ffa681dc /doc/rfc/rfc9172.txt | |
| parent | ea76e11061bda059ae9f9ad130a9895cc85607db (diff) | |
doc: Add RFC documents
Diffstat (limited to 'doc/rfc/rfc9172.txt')
| -rw-r--r-- | doc/rfc/rfc9172.txt | 1989 |
1 files changed, 1989 insertions, 0 deletions
diff --git a/doc/rfc/rfc9172.txt b/doc/rfc/rfc9172.txt new file mode 100644 index 0000000..beb800c --- /dev/null +++ b/doc/rfc/rfc9172.txt @@ -0,0 +1,1989 @@ + + + + +Internet Engineering Task Force (IETF) E. Birrane, III +Request for Comments: 9172 K. McKeever +Category: Standards Track JHU/APL +ISSN: 2070-1721 January 2022 + + + Bundle Protocol Security (BPSec) + +Abstract + + This document defines a security protocol providing data integrity + and confidentiality services for the Bundle Protocol (BP). + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 7841. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + https://www.rfc-editor.org/info/rfc9172. + +Copyright Notice + + Copyright (c) 2022 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (https://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Revised BSD License text as described in Section 4.e of the + Trust Legal Provisions and are provided without warranty as described + in the Revised BSD License. + +Table of Contents + + 1. Introduction + 1.1. Supported Security Services + 1.2. Specification Scope + 1.3. Related Documents + 1.4. Terminology + 2. Design Decisions + 2.1. Block-Level Granularity + 2.2. Multiple Security Sources + 2.3. Mixed Security Policy + 2.4. User-Defined Security Contexts + 2.5. Deterministic Processing + 3. Security Blocks + 3.1. Block Definitions + 3.2. Uniqueness + 3.3. Target Multiplicity + 3.4. Target Identification + 3.5. Block Representation + 3.6. Abstract Security Block + 3.7. Block Integrity Block + 3.8. Block Confidentiality Block + 3.9. Block Interactions + 3.10. Parameter and Result Identification + 3.11. BPSec Block Examples + 3.11.1. Example 1: Constructing a Bundle with Security + 3.11.2. Example 2: Adding More Security at a New Node + 4. Canonical Forms + 5. Security Processing + 5.1. Bundles Received from Other Nodes + 5.1.1. Receiving BCBs + 5.1.2. Receiving BIBs + 5.2. Bundle Fragmentation and Reassembly + 6. Key Management + 7. Security Policy Considerations + 7.1. Security Reason Codes + 8. Security Considerations + 8.1. Attacker Capabilities and Objectives + 8.2. Attacker Behaviors and BPSec Mitigations + 8.2.1. Eavesdropping Attacks + 8.2.2. Modification Attacks + 8.2.3. Topology Attacks + 8.2.4. Message Injection + 9. Security Context Considerations + 9.1. Mandating Security Contexts + 9.2. Identification and Configuration + 9.3. Authorship + 10. Defining Other Security Blocks + 11. IANA Considerations + 11.1. Bundle Block Types + 11.2. Bundle Status Report Reason Codes + 11.3. Security Context Identifiers + 12. References + 12.1. Normative References + 12.2. Informative References + Acknowledgments + Authors' Addresses + +1. Introduction + + This document defines security features for the Bundle Protocol (BP) + [RFC9171] and is intended for use in Delay-Tolerant Networking (DTN) + to provide security services between a security source and a security + acceptor. When the security source is the bundle source and the + security acceptor is the bundle destination, the security service + provides end-to-end protection. + + The Bundle Protocol specification [RFC9171] defines DTN as referring + to "a network architecture providing communications in and/or through + highly stressed environments" where "BP may be viewed as sitting at + the application layer of some number of constituent networks, forming + a store-carry-forward overlay network". The phrase "stressed + environment" refers to multiple challenging conditions including + intermittent connectivity, large and/or variable delays, asymmetric + data rates, and high bit error rates. + + It should be presumed that the BP will be deployed in an untrusted + network, which poses the usual security challenges related to + confidentiality and integrity. However, the stressed nature of the + BP operating environment imposes unique conditions where usual + transport security mechanisms may not be sufficient. For example, + the store-carry-forward nature of the network may require protecting + data at rest, preventing unauthorized consumption of critical + resources such as storage space, and operating without regular + contact with a centralized security oracle (such as a certificate + authority). + + An end-to-end security service that operates in all of the + environments where the BP operates is needed. + +1.1. Supported Security Services + + BPSec provides integrity and confidentiality services for BP bundles, + as defined in this section. + + Integrity services ensure that changes to target data within a bundle + can be discovered. Data changes may be caused by processing errors, + environmental conditions, or intentional manipulation. In the + context of BPSec, integrity services apply to plaintext in the + bundle. + + Confidentiality services ensure that target data is unintelligible to + nodes in DTN, except for authorized nodes possessing special + information. Generally, this means producing ciphertext from + plaintext and generating authentication information for that + ciphertext. In this context, confidentiality applies to the contents + of target data and does not extend to hiding the fact that + confidentiality exists in the bundle. + + NOTE: Hop-by-hop authentication is NOT a supported security service + in this specification, for two reasons: + + 1. The term "hop-by-hop" is ambiguous in a BP overlay, as nodes that + are adjacent in the overlay may not be adjacent in physical + connectivity. This condition is difficult or impossible to + detect; therefore, hop-by-hop authentication is difficult or + impossible to enforce. + + 2. Hop-by-hop authentication cannot be deployed in a network if + adjacent nodes in the network have incompatible security + capabilities. + +1.2. Specification Scope + + This document defines the security services provided by the BPSec. + This includes the data specification for representing these services + as BP extension blocks and the rules for adding, removing, and + processing these blocks at various points during the bundle's + traversal of a delay-tolerant network. + + BPSec addresses only the security of data traveling over the DTN, not + the underlying DTN itself. Furthermore, while the BPSec protocol can + provide security-at-rest in a store-carry-forward network, it does + not address threats that share computing resources with the DTN and/ + or BPSec software implementations. These threats may be malicious + software or compromised libraries that intend to intercept data or + recover cryptographic material. Here, it is the responsibility of + the BPSec implementer to ensure that any cryptographic material, + including shared secrets or private keys, is protected against access + within both memory and storage devices. + + Completely trusted networks are extremely uncommon. Among untrusted + networks, different networking conditions and operational + considerations require security mechanisms of varying strengths. + Mandating a single security context, which is a set of assumptions, + algorithms, configurations, and policies used to implement security + services, may result in too much security for some networks and too + little security in others. Default security contexts are defined in + [RFC9173] to provide basic security services for interoperability + testing and for operational use on the terrestrial Internet. It is + expected that separate documents will define different security + contexts for use in different networks. + + This specification addresses neither the fitness of externally + defined cryptographic methods nor the security of their + implementation. + + This specification does not address the implementation of security + policies and does not provide a security policy for the BPSec. + Similar to cipher suites, security policies are based on the nature + and capabilities of individual networks and network operational + concepts. This specification does provide policy considerations that + can be taken into account when building a security policy. + + With the exception of the Bundle Protocol, this specification does + not address how to combine the BPSec security blocks with other + protocols, other BP extension blocks, or other best practices to + achieve security in any particular network implementation. + +1.3. Related Documents + + This document is best read and understood within the context of the + following other DTN documents: + + * "Delay-Tolerant Networking Architecture" [RFC4838] defines the + architecture for DTN and identifies certain security assumptions + made by existing Internet protocols that are not valid in DTN. + + * "Bundle Protocol Version 7" [RFC9171] defines the format and + processing of bundles, the extension block format used to + represent BPSec security blocks, and the canonical block structure + used by this specification. + + * "Concise Binary Object Representation (CBOR)" [RFC8949] defines a + data format that allows for small code size, fairly small message + size, and extensibility without version negotiation. The block- + type-specific data associated with BPSec security blocks is + encoded in this data format. + + * "Bundle Security Protocol Specification" [RFC6257] introduces the + concept of using BP extension blocks for security services in DTN. + BPSec is a continuation and refinement of this document. + +1.4. Terminology + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and + "OPTIONAL" in this document are to be interpreted as described in + BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all + capitals, as shown here. + + This section defines terminology that either is unique to the BPSec + or is necessary for understanding the concepts defined in this + specification. + + Bundle Destination: the Bundle Protocol Agent (BPA) that receives a + bundle and delivers the payload of the bundle to an Application + Agent. Also, an endpoint comprising the node(s) at which the + bundle is to be delivered. The bundle destination acts as the + security acceptor for every security target in every security + block in every bundle it receives. + + Bundle Source: the BPA that originates a bundle. Also, any node ID + of the node of which the BPA is a component. + + Cipher Suite: a set of one or more algorithms providing integrity + and/or confidentiality services. Cipher suites may define user + parameters (e.g., secret keys to use), but they do not provide + values for those parameters. + + Forwarder: any BPA that transmits a bundle in DTN. Also, any node + ID of the node of which the BPA that sent the bundle on its most + recent hop is a component. + + Intermediate Receiver, Waypoint, or Next Hop: any BPA that receives + a bundle from a forwarder that is not the bundle destination. + Also, any node ID of the node of which the BPA is a component. + + Path: the ordered sequence of nodes through which a bundle passes on + its way from source to destination. The path is not necessarily + known in advance by the bundle or any BPAs in DTN. + + Security Acceptor: a BPA that processes and dispositions one or more + security blocks in a bundle. Security acceptors act as the + endpoint of a security service represented in a security block. + They remove the security blocks they act upon as part of + processing and disposition. Also, any node ID of the node of + which the BPA is a component. + + Security Block: a BPSec extension block in a bundle. + + Security Context: the set of assumptions, algorithms, + configurations, and policies used to implement security services. + + Security Operation: the application of a given security service to a + security target, notated as OP(security service, security target). + For example, OP(bcb-confidentiality, payload). Every security + operation in a bundle MUST be unique, meaning that a given + security service can only be applied to a security target once in + a bundle. A security operation is implemented by a security + block. + + Security Service: a process that gives some protection to a security + target. For example, this specification defines security services + for plaintext integrity (bib-integrity) and authenticated + plaintext confidentiality with additional authenticated data (bcb- + confidentiality). + + Security Source: a BPA that adds a security block to a bundle. + Also, any node ID of the node of which the BPA is a component. + + Security Target: the block within a bundle that receives a security + service as part of a security operation. + + Security Verifier: a BPA that verifies the data integrity of one or + more security blocks in a bundle. Unlike security acceptors, + security verifiers do not act as the endpoint of a security + service, and they do not remove verified security blocks. Also, + any node ID of the node of which the BPA is a component. + +2. Design Decisions + + The application of security services in DTN is a complex endeavor + that must consider physical properties of the network (such as + connectivity and propagation times), policies at each node, + application security requirements, and current and future threat + environments. This section identifies those desirable properties + that guide design decisions for this specification and that are + necessary for understanding the format and behavior of the BPSec + protocol. + +2.1. Block-Level Granularity + + Security services within this specification must allow different + blocks within a bundle to have different security services applied to + them. + + Blocks within a bundle represent different types of information. The + primary block contains identification and routing information. The + payload block carries application data. Extension blocks carry a + variety of data that may augment or annotate the payload or that + otherwise provide information necessary for the proper processing of + a bundle along a path. Therefore, applying a single level and type + of security across an entire bundle fails to recognize that blocks in + a bundle represent different types of information with different + security needs. + + For example, a payload block might be encrypted to protect its + contents and an extension block containing summary information + related to the payload might be integrity signed but unencrypted to + provide waypoints access to payload-related data without providing + access to the payload. + +2.2. Multiple Security Sources + + A bundle can have multiple security blocks, and these blocks can have + different security sources. BPSec implementations MUST NOT assume + that all blocks in a bundle have the same security operations applied + to them. + + The Bundle Protocol allows extension blocks to be added to a bundle + at any time during its existence in DTN. When a waypoint adds a new + extension block to a bundle, that extension block MAY have security + services applied to it by that waypoint. Similarly, a waypoint MAY + add a security service to an existing block, consistent with its + security policy. + + When a waypoint adds a security service to the bundle, the waypoint + is the security source for that service. The security block(s) that + represent that service in the bundle may need to record this security + source, as the bundle destination might need this information for + processing. + + For example, a bundle source may choose to apply an integrity service + to its plaintext payload. Later a waypoint node, representing a + gateway to another portion of the delay-tolerant network, may receive + the bundle and choose to apply a confidentiality service. In this + case, the integrity security source is the bundle source and the + confidentiality security source is the waypoint node. + + In cases where the security source and security acceptor are not the + bundle source and bundle destination, respectively, it is possible + that the bundle will reach the bundle destination prior to reaching a + security acceptor. In cases where this may be a practical problem, + it is recommended that solutions such as bundle encapsulation be used + to ensure that a bundle be delivered to a security acceptor prior to + being delivered to the bundle destination. Generally, if a bundle + reaches a waypoint that has the appropriate configuration and policy + to act as a security acceptor for a security service in the bundle, + then the waypoint should act as that security acceptor. + +2.3. Mixed Security Policy + + The security policy enforced by nodes in the delay-tolerant network + may differ. + + Some waypoints will have security policies that require the waypoint + to evaluate security services even if the waypoint is neither the + bundle destination nor the final intended acceptor of the service. + For example, a waypoint could choose to verify an integrity service + even though the waypoint is not the bundle destination and the + integrity service will be needed by other nodes along the bundle's + path. + + Some waypoints will determine, through policy, that they are the + intended recipient of the security service and will terminate the + security service in the bundle. For example, a gateway node could + determine that, even though it is not the destination of the bundle, + it should verify and remove a particular integrity service or attempt + to decrypt a confidentiality service, before forwarding the bundle + along its path. + + Some waypoints could understand security blocks but refuse to process + them unless they are the bundle destination. + +2.4. User-Defined Security Contexts + + A security context is the set of assumptions, algorithms, + configurations, and policies used to implement security services. + Different contexts may specify different algorithms, different + polices, or different configuration values used in the implementation + of their security services. BPSec provides a mechanism to define + security contexts. Users may select from registered security + contexts and customize those contexts through security context + parameters. + + For example, some users might prefer a SHA2 hash function for + integrity, whereas other users might prefer a SHA3 hash function. + Providing either separate security contexts or a single, + parameterized security context allows users flexibility in applying + the desired cipher suite, policy, and configuration when populating a + security block. + +2.5. Deterministic Processing + + Whenever a node determines that it must process more than one + security block in a received bundle (either because the policy at a + waypoint states that it should process security blocks or because the + node is the bundle destination), the order in which security blocks + are processed must be deterministic. All nodes must impose this same + deterministic processing order for all security blocks. This + specification provides determinism in the application and evaluation + of security services, even when doing so results in a loss of + flexibility. + +3. Security Blocks + +3.1. Block Definitions + + This specification defines two types of security block: the Block + Integrity Block (BIB) and the Block Confidentiality Block (BCB). + + * The BIB is used to ensure the integrity of its plaintext security + target(s). The integrity information in the BIB MAY be verified + by any node along the bundle path from the BIB security source to + the bundle destination. Waypoints add or remove BIBs from bundles + in accordance with their security policy. BIBs are never used for + integrity protection of the ciphertext provided by a BCB. Because + security policy at BPSec nodes may differ regarding integrity + verification, BIBs do not guarantee hop-by-hop authentication, as + discussed in Section 1.1. + + * The BCB indicates that the security target or targets have been + encrypted at the BCB security source in order to protect their + content while in transit. As a matter of security policy, the BCB + is decrypted by security acceptor nodes in the network, up to and + including the bundle destination. BCBs additionally provide + integrity-protection mechanisms for the ciphertext they generate. + +3.2. Uniqueness + + Security operations in a bundle MUST be unique; the same security + service MUST NOT be applied to a security target more than once in a + bundle. Since a security operation is represented by a security + block, this means that multiple security blocks of the same type + cannot share the same security targets. A new security block MUST + NOT be added to a bundle if a preexisting security block of the same + type is already defined for the security target of the new security + block. + + This uniqueness requirement ensures that there is no ambiguity + related to the order in which security blocks are processed or how + security policy can be specified to require certain security services + be present in a bundle. + + Using the notation OP(service, target), several examples illustrate + this uniqueness requirement. + + Signing the payload twice: The two operations OP(bib-integrity, + payload) and OP(bib-integrity, payload) are redundant and MUST NOT + both be present in the same bundle at the same time. + + Signing different blocks: The two operations OP(bib-integrity, + payload) and OP(bib-integrity, extension_block_1) are not + redundant and both may be present in the same bundle at the same + time. Similarly, the two operations OP(bib-integrity, + extension_block_1) and OP(bib-integrity, extension_block_2) are + also not redundant and may both be present in the bundle at the + same time. + + Different services on same block: The two operations OP(bib- + integrity, payload) and OP(bcb-confidentiality, payload) are not + inherently redundant and may both be present in the bundle at the + same time, pursuant to other processing rules in this + specification. + + Different services from different block types: The notation + OP(service, target) refers specifically to a security block, as + the security block is the embodiment of a security service applied + to a security target in a bundle. Were some Other Security Block + (OSB) to be defined providing an integrity service, then the + operations OP(bib-integrity, target) and OP(osb-integrity, target) + MAY both be present in the same bundle if so allowed by the + definition of the OSB, as discussed in Section 10. + + NOTES: + + * A security block may be removed from a bundle as part of security + processing at a waypoint node with a new security block being + added to the bundle by that node. In this case, conflicting + security blocks never coexist in the bundle at the same time and + the uniqueness requirement is not violated. + + * A ciphertext integrity-protection mechanism (such as associated + authenticated data) calculated by a cipher suite and transported + in a BCB is considered part of the confidentiality service; + therefore, it is unique from the plaintext integrity service + provided by a BIB. + + * The security blocks defined in this specification (BIB and BCB) + are designed with the intention that the BPA adding these blocks + is the authoritative source of the security service. If a BPA + adds a BIB on a security target, then the BIB is expected to be + the authoritative source of integrity for that security target. + If a BPA adds a BCB to a security target, then the BCB is expected + to be the authoritative source of confidentiality for that + security target. More complex scenarios, such as having multiple + nodes in a network sign the same security target, can be + accommodated using the definition of custom security contexts (see + Section 9) and/or the definition of OSBs (see Section 10). + +3.3. Target Multiplicity + + A single security block MAY represent multiple security operations as + a way of reducing the overall number of security blocks present in a + bundle. In these circumstances, reducing the number of security + blocks in the bundle reduces the amount of redundant information in + the bundle. + + A set of security operations can be represented by a single security + block when all of the following conditions are true. + + * The security operations apply the same security service. For + example, they are all integrity operations or all confidentiality + operations. + + * The security context parameters for the security operations are + identical. + + * The security source for the security operations is the same, + meaning the set of operations are being added by the same node. + + * No security operations have the same security target, as that + would violate the need for security operations to be unique. + + * None of the security operations conflict with security operations + already present in the bundle. + + When representing multiple security operations in a single security + block, the information that is common across all operations is + represented once in the security block; the information that is + different (e.g., the security targets) is represented individually. + + If a node processes any security operation in a security block, it is + RECOMMENDED that it process all security operations in the security + block. This allows security sources to assert that the set of + security operations in a security block are expected to be processed + by the same security acceptor. However, the determination of whether + a node actually is a security acceptor or not is a matter of the + policy of the node itself. In cases where a receiving node + determines that it is the security acceptor of only a subset of the + security operations in a security block, the node may choose to only + process that subset of security operations. + +3.4. Target Identification + + A security target is a block in the bundle to which a security + service applies. This target must be uniquely and unambiguously + identifiable when processing a security block. The definition of the + extension block header from [RFC9171] provides a "block number" field + suitable for this purpose. Therefore, a security target in a + security block MUST be represented as the block number of the target + block. + +3.5. Block Representation + + Each security block uses the Canonical Bundle Block Format as defined + in [RFC9171]. That is, each security block is comprised of the + following elements: + + * block type code + * block number + * block processing control flags + * cyclic redundancy check (CRC) type + * block-type-specific data + * CRC field (if present) + + Security-specific information for a security block is captured in the + block-type-specific data field. + +3.6. Abstract Security Block + + The structure of the security-specific portions of a security block + is identical for both the BIB and BCB block types. Therefore, this + section defines an Abstract Security Block (ASB) data structure and + discusses its definition, its processing, and other constraints for + using this structure. An ASB is never directly instantiated within a + bundle, it is only a mechanism for discussing the common aspects of + BIB and BCB security blocks. + + The fields of the ASB SHALL be as follows, listed in the order in + which they must appear. The encoding of these fields MUST be in + accordance with the canonical forms provided in Section 4. + + Security Targets: + This field identifies the block(s) targeted by the security + operation(s) represented by this security block. Each target + block is represented by its unique block number. This field + SHALL be represented by a Concise Binary Object Representation + (CBOR) array of data items. Each target within this CBOR array + SHALL be represented by a CBOR unsigned integer. This array + MUST have at least one entry and each entry MUST represent the + block number of a block that exists in the bundle. There MUST + NOT be duplicate entries in this array. The order of elements + in this list has no semantic meaning outside of the context of + this block. Within the block, the ordering of targets must + match the ordering of results associated with these targets. + + Security Context Id: + This field identifies the security context used to implement + the security service represented by this block and applied to + each security target. This field SHALL be represented by a + CBOR unsigned integer. The values for this Id should come from + the registry defined in Section 11.3. + + Security Context Flags: + This field identifies which optional fields are present in the + security block. This field SHALL be represented as a CBOR + unsigned integer whose contents shall be interpreted as a bit + field. Each bit in this bit field indicates the presence (bit + set to 1) or absence (bit set to 0) of optional data in the + security block. The association of bits to security block data + is defined as follows. + + Bit 0 (the least-significant bit, 0x01): "Security context + parameters present" flag. + + Bit >0 Reserved + + Implementations MUST set reserved bits to 0 when writing this + field and MUST ignore the values of reserved bits when reading + this field. For unreserved bits, a value of 1 indicates that + the associated security block field MUST be included in the + security block. A value of 0 indicates that the associated + security block field MUST NOT be in the security block. + + Security Source: + This field identifies the BPA that inserted the security block + in the bundle. Also, any node ID of the node of which the BPA + is a component. This field SHALL be represented by a CBOR + array in accordance with the rules in [RFC9171] for + representing endpoint IDs (EIDs). + + Security Context Parameters (Optional): + This field captures one or more security context parameters + that should be used when processing the security service + described by this security block. This field SHALL be + represented by a CBOR array. Each entry in this array is a + single security context parameter. A single parameter SHALL + also be represented as a CBOR array comprising a 2-tuple of the + Id and value of the parameter, as follows. + + Parameter Id: This field identifies which parameter is being + specified. This field SHALL be represented as a CBOR + unsigned integer. Parameter Ids are selected as described + in Section 3.10. + + Parameter Value: This field captures the value associated with + this parameter. This field SHALL be represented by the + applicable CBOR representation of the parameter, in + accordance with Section 3.10. + + The logical layout of the parameters array is illustrated in + Figure 1. + + +----------------+----------------+ +----------------+ + | Parameter 1 | Parameter 2 | ... | Parameter N | + +------+---------+------+---------+ +------+---------+ + | Id | Value | Id | Value | | Id | Value | + +------+---------+------+---------+ +------+---------+ + + Figure 1: Security Context Parameters + + Security Results: + This field captures the results of applying a security service + to the security targets of the security block. This field + SHALL be represented as a CBOR array of target results. Each + entry in this array represents the set of security results for + a specific security target. The target results MUST be ordered + identically to the Security Targets field of the security + block. This means that the first set of target results in this + array corresponds to the first entry in the Security Targets + field of the security block, and so on. There MUST be one + entry in this array for each entry in the Security Targets + field of the security block. + + The set of security results for a target is also represented as + a CBOR array of individual results. An individual result is + represented as a CBOR array comprising a 2-tuple of a result Id + and a result value, defined as follows. + + Result Id: This field identifies which security result is + being specified. Some security results capture the primary + output of a cipher suite. Other security results contain + additional annotative information from cipher suite + processing. This field SHALL be represented as a CBOR + unsigned integer. Security result Ids will be as specified + in Section 3.10. + + Result Value: This field captures the value associated with + the result. This field SHALL be represented by the + applicable CBOR representation of the result value, in + accordance with Section 3.10. + + The logical layout of the security results array is illustrated + in Figure 2. In this figure, there are N security targets for + this security block. The first security target contains M + results and the Nth security target contains K results. + + +--------------------------+ +---------------------------+ + | Target 1 | | Target N | + +----------+----+----------+ +---------------------------+ + | Result 1 | | Result M | ... | Result 1 | | Result K | + +----+-----+ .. +----+-----+ +---+------+ .. +----+------+ + | Id |Value| | Id |Value| | Id |Value| | Id | Value| + +----+-----+ +----+-----+ +----+-----+ +----+------+ + + Figure 2: Security Results + +3.7. Block Integrity Block + + A BIB is a BP extension block with the following characteristics. + + * The block type code value is as specified in Section 11.1. + + * The block-type-specific data field follows the structure of the + ASB. + + * A security target listed in the Security Targets field MUST NOT + reference a security block defined in this specification (e.g., a + BIB or a BCB). + + * The security context MUST utilize an authentication mechanism or + an error detection mechanism. + + Notes: + + * Designers SHOULD carefully consider the effect of setting flags + that either discard the block or delete the bundle in the event + that this block cannot be processed. + + * Since OP(bib-integrity, target) is allowed only once in a bundle + per target, it is RECOMMENDED that users wishing to support + multiple integrity-protection mechanisms for the same target + define a multi-result security context. Such a context could + generate multiple security results for the same security target + using different integrity-protection mechanisms or different + configurations for the same integrity-protection mechanism. + + * A BIB is used to verify the plaintext integrity of its security + target. However, a single BIB MAY include security results for + blocks other than its security target when doing so establishes a + needed relationship between the BIB security target and other + blocks in the bundle (such as the primary block). + + * Security information MAY be checked at any hop on the way to the + bundle destination that has access to the required keying + information, in accordance with Section 3.9. + +3.8. Block Confidentiality Block + + A BCB is a BP extension block with the following characteristics. + + * The block type code value is as specified in Section 11.1. + + * The block processing control flags value can be set to whatever + values are required by local policy with the following exceptions: + + - BCBs MUST have the "Block must be replicated in every fragment" + flag set if one of the targets is the payload block. Having + that BCB in each fragment indicates to a receiving node that + the payload portion of each fragment represents ciphertext. + + - BCBs MUST NOT have the "Block must be removed from bundle if it + can't be processed" flag set. Removing a BCB from a bundle + without decrypting its security targets removes information + from the bundle necessary for their later decryption. + + * The block-type-specific data fields follow the structure of the + ASB. + + * A security target listed in the Security Targets field can + reference the payload block, a non-security extension block, or a + BIB. A BCB MUST NOT include another BCB as a security target. A + BCB MUST NOT target the primary block. A BCB MUST NOT target a + BIB unless it shares a security target with that BIB. + + * Any security context used by a BCB MUST utilize a confidentiality + cipher that provides authenticated encryption with associated data + (AEAD). + + * Additional information created by a cipher suite (such as an + authentication tag) can be placed either in a security result + field or in the generated ciphertext. The determination of where + to place this information is a function of the cipher suite and + security context used. + + The BCB modifies the contents of its security target(s). When a BCB + is applied, the security target body data are encrypted "in-place". + Following encryption, the security target block-type-specific data + field contains ciphertext, not plaintext. + + Notes: + + * It is RECOMMENDED that designers carefully consider the effect of + setting flags that delete the bundle in the event that this block + cannot be processed. + + * The BCB block processing control flags can be set independently + from the processing control flags of the security target(s). The + setting of such flags should be an implementation/policy decision + for the encrypting node. + +3.9. Block Interactions + + The security block types defined in this specification are designed + to be as independent as possible. However, there are some cases + where security blocks may share a security target; this sharing + creates processing dependencies. + + If a BCB and a BIB share a security target, an undesirable condition + occurs: a waypoint would be unable to validate the BIB because the + shared security target has been encrypted by the BCB. To address + this situation, the following processing rules MUST be followed: + + * When adding a BCB to a bundle, if some (or all) of the security + targets of the BCB match all of the security targets of an + existing BIB, then the existing BIB MUST also be encrypted. This + can be accomplished either by adding a new BCB that targets the + existing BIB or by adding the BIB to the list of security targets + for the BCB. Deciding which way to represent this situation is a + matter of security policy. + + * When adding a BCB to a bundle, if some (or all) of the security + targets of the BCB match some (but not all) of the security + targets of a BIB, then that BIB MUST be altered in the following + way. Any security results in the BIB associated with the BCB + security targets MUST be removed from the BIB and placed in a new + BIB. This newly created BIB MUST then be encrypted. The + encryption of the new BIB can be accomplished either by adding a + new BCB that targets the new BIB or by adding the new BIB to the + list of security targets for the BCB. Deciding which way to + represent this situation is a matter of security policy. + + * A BIB MUST NOT be added for a security target that is already the + security target of a BCB as this would cause ambiguity in block + processing order. + + * A BIB integrity value MUST NOT be checked if the BIB is the + security target of an existing BCB. In this case, the BIB data is + encrypted. + + * A BIB integrity value MUST NOT be checked if the security target + associated with that value is also the security target of a BCB. + In such a case, the security target data contains ciphertext as it + has been encrypted. + + * As mentioned in Section 3.7, a BIB MUST NOT have a BCB as its + security target. + + These restrictions on block interactions impose a necessary ordering + when applying security operations within a bundle. Specifically, for + a given security target, BIBs MUST be added before BCBs. This + ordering MUST be preserved in cases where the current BPA is adding + all of the security blocks for the bundle or where the BPA is a + waypoint adding new security blocks to a bundle that already contains + security blocks. + + In cases where a security source wishes to calculate both a plaintext + integrity-protection mechanism and encrypt a security target, a BCB + with a security context that generates an integrity-protection + mechanism as one or more additional security results MUST be used + instead of adding both a BIB and then a BCB for the security target + at the security source. + +3.10. Parameter and Result Identification + + Each security context MUST define its own context parameters and + results. Each defined parameter and result is represented as the + tuple of an identifier and a value. Identifiers are always + represented as a CBOR unsigned integer. The CBOR encoding of values + is as defined by the security context specification. + + Identifiers MUST be unique for a given security context but do not + need to be unique amongst all security contexts. + + An example of a security context can be found in [RFC9173]. + +3.11. BPSec Block Examples + + This section provides two examples of BPSec blocks applied to + bundles. In the first example, a single node adds several security + operations to a bundle. In the second example, a waypoint node + received the bundle created in the first example and adds additional + security operations. In both examples, the first column represents + blocks within a bundle and the second column represents the block + number for the block, using the terminology B1...Bn for the purpose + of illustration. + +3.11.1. Example 1: Constructing a Bundle with Security + + In this example, a bundle has four non-security-related blocks: the + primary block (B1), two extension blocks (B4, B5), and a payload + block (B6). The bundle source wishes to provide an integrity + signature of the plaintext associated with the primary block, the + second extension block, and the payload. The bundle source also + wishes to provide confidentiality for the first extension block. The + resultant bundle is illustrated in Figure 3 and the security actions + are described below. + + Block in Bundle ID + +==========================================+====+ + | Primary Block | B1 | + +------------------------------------------+----+ + | BIB | B2 | + | OP(bib-integrity, targets = B1, B5, B6)| | + +------------------------------------------+----+ + | BCB | B3 | + | OP(bcb-confidentiality, target = B4) | | + +------------------------------------------+----+ + | Extension Block (encrypted) | B4 | + +------------------------------------------+----+ + | Extension Block | B5 | + +------------------------------------------+----+ + | Payload Block | B6 | + +------------------------------------------+----+ + + Figure 3: Security at Bundle Creation + + The following security actions were applied to this bundle at its + time of creation. + + * An integrity signature applied to the canonical form of the + primary block (B1), the canonical form of the block-type-specific + data field of the second extension block (B5), and the canonical + form of the payload block (B6). This is accomplished by a single + BIB (B2) with multiple targets. A single BIB is used in this case + because all three targets share a security source, security + context, and security context parameters. Had this not been the + case, multiple BIBs could have been added instead. + + * Confidentiality for the first extension block (B4). This is + accomplished by a BCB (B3). Once applied, the block-type-specific + data field of extension block B4 is encrypted. The BCB MUST hold + an authentication tag for the ciphertext either in the ciphertext + that now populates the first extension block or as a security + result in the BCB itself, depending on which security context is + used to form the BCB. A plaintext integrity signature may also + exist as a security result in the BCB if one is provided by the + selected confidentiality security context. + +3.11.2. Example 2: Adding More Security at a New Node + + Consider that the bundle as it is illustrated in Figure 3 is now + received by a waypoint node that wishes to encrypt the second + extension block and the bundle payload. The waypoint security policy + is to allow existing BIBs for these blocks to persist, as they may be + required as part of the security policy at the bundle destination. + + The resultant bundle is illustrated in Figure 4 and the security + actions are described below. Note that block IDs provided here are + ordered solely for the purpose of this example and are not meant to + impose an ordering for block creation. The ordering of blocks added + to a bundle MUST always be in compliance with [RFC9171]. + + Block in Bundle ID + +==========================================+====+ + | Primary Block | B1 | + +------------------------------------------+----+ + | BIB | B2 | + | OP(bib-integrity, target = B1) | | + +------------------------------------------+----+ + | BIB (encrypted) | B7 | + | OP(bib-integrity, targets = B5, B6) | | + +------------------------------------------+----+ + | BCB | B8 | + |OP(bcb-confidentiality,targets = B5,B6,B7)| | + +------------------------------------------+----+ + | BCB | B3 | + | OP(bcb-confidentiality, target = B4) | | + +------------------------------------------+----+ + | Extension Block (encrypted) | B4 | + +------------------------------------------+----+ + | Extension Block (encrypted) | B5 | + +------------------------------------------+----+ + | Payload Block (encrypted) | B6 | + +------------------------------------------+----+ + + Figure 4: Security at Bundle Forwarding + + The following security actions were applied to this bundle prior to + its forwarding from the waypoint node. + + * Since the waypoint node wishes to encrypt the block-type-specific + data field of blocks B5 and B6, it MUST also encrypt the block- + type-specific data field of the BIBs providing plaintext integrity + over those blocks. However, BIB B2 could not be encrypted in its + entirety because it also held a signature for the primary block + (B1). Therefore, a new BIB (B7) is created and security results + associated with B5 and B6 are moved out of BIB B2 and into BIB B7. + + * Now that there is no longer confusion about which plaintext + integrity signatures must be encrypted, a BCB is added to the + bundle with the security targets being the second extension block + (B5) and the payload (B6) as well as the newly created BIB holding + their plaintext integrity signatures (B7). A single new BCB is + used in this case because all three targets share a security + source, security context, and security context parameters. Had + this not been the case, multiple BCBs could have been added + instead. + +4. Canonical Forms + + Security services require consistency and determinism in how + information is presented to cipher suites at security sources, + verifiers, and acceptors. For example, integrity services require + that the same target information (e.g., the same bits in the same + order) is provided to the cipher suite when generating an original + signature and when validating a signature. Canonicalization + algorithms transcode the contents of a security target into a + canonical form. + + Canonical forms are used to generate input to a security context for + security processing at a BP node. If the values of a security target + are unchanged, then the canonical form of that target will be the + same even if the encoding of those values for wire transmission is + different. + + BPSec operates on data fields within bundle blocks (e.g., the block- + type-specific data field). In their canonical form, these fields + MUST include their own CBOR encoding and MUST NOT include any other + encapsulating CBOR encoding. For example, the canonical form of the + block-type-specific data field is a CBOR byte string existing within + the CBOR array containing the fields of the extension block. The + entire CBOR byte string is considered the canonical block-type- + specific data field. The CBOR array framing is not considered part + of the field. + + The canonical form of the primary block is as specified in [RFC9171] + with the following constraint. + + * CBOR values from the primary block MUST be canonicalized using the + rules for Deterministically Encoded CBOR, as specified in + [RFC8949]. + + All non-primary blocks share the same block structure and are + canonicalized as specified in [RFC9171] with the following + constraints. + + * CBOR values from the non-primary block MUST be canonicalized using + the rules for Deterministically Encoded CBOR, as specified in + [RFC8949]. + + * Only the block-type-specific data field may be provided to a + cipher suite for encryption as part of a confidentiality security + service. Other fields within a non-primary block MUST NOT be + encrypted or decrypted and MUST NOT be included in the canonical + form used by the cipher suite for encryption and decryption. An + integrity-protection mechanism MAY be applied to these other + fields as supported by the security context. For example, these + fields might be treated as associated authenticated data. + + * Reserved and unassigned flags in the block processing control + flags field MUST be set to 0 in a canonical form as it is not + known if those flags will change in transit. + + Security contexts MAY define their own canonicalization algorithms + and require the use of those algorithms over the ones provided in + this specification. In the event of conflicting canonicalization + algorithms, algorithms defined in a security context take precedence + over this specification when constructing canonical forms for that + security context. + +5. Security Processing + + This section describes the security aspects of bundle processing. + +5.1. Bundles Received from Other Nodes + + Security blocks must be processed in a specific order when received + by a BP node. The processing order is as follows. + + * When BIBs and BCBs share a security target, BCBs MUST be evaluated + first and BIBs second. + +5.1.1. Receiving BCBs + + If a received bundle contains a BCB, the receiving node MUST + determine whether it is the security acceptor for any of the security + operations in the BCB. If so, the node MUST process those operations + and remove any operation-specific information from the BCB prior to + delivering data to an application at the node or forwarding the + bundle. If processing a security operation fails, the target SHALL + be processed according to the security policy. A bundle status + report indicating the failure MAY be generated. When all security + operations for a BCB have been removed from the BCB, the BCB MUST be + removed from the bundle. + + If the receiving node is the destination of the bundle, the node MUST + decrypt any BCBs remaining in the bundle. If the receiving node is + not the destination of the bundle, the node MUST process the BCB if + directed to do so as a matter of security policy. + + If the security policy of a node specifies that a node should have + applied confidentiality to a specific security target and no such BCB + is present in the bundle, then the node MUST process this security + target in accordance with the security policy. It is RECOMMENDED + that the node remove the security target from the bundle because the + confidentiality (and possibly the integrity) of the security target + cannot be guaranteed. If the removed security target is the payload + block, the bundle MUST be discarded. + + If an encrypted payload block cannot be decrypted (i.e., the + ciphertext cannot be authenticated), then the bundle MUST be + discarded and processed no further. If an encrypted security target + other than the payload block cannot be decrypted, then the associated + security target and all security blocks associated with that target + MUST be discarded and processed no further. In both cases, requested + status reports (see [RFC9171]) MAY be generated to reflect bundle or + block deletion. + + When a BCB is decrypted, the recovered plaintext for each security + target MUST replace the ciphertext in each of the security targets' + block-type-specific data fields. If the plaintext is of a different + size than the ciphertext, the framing of the CBOR byte string of this + field must be updated to ensure this field remains a valid CBOR byte + string. The length of the recovered plaintext is known by the + decrypting security context. + + If a BCB contains multiple security operations, each operation + processed by the node MUST be treated as if the security operation + has been represented by a single BCB with a single security operation + for the purposes of report generation and policy processing. + +5.1.2. Receiving BIBs + + If a received bundle contains a BIB, the receiving node MUST + determine whether it is the security acceptor for any of the security + operations in the BIB. If so, the node MUST process those operations + and remove any operation-specific information from the BIB prior to + delivering data to an application at the node or forwarding the + bundle. If processing a security operation fails, the target SHALL + be processed according to the security policy. A bundle status + report indicating the failure MAY be generated. When all security + operations for a BIB have been removed from the BIB, the BIB MUST be + removed from the bundle. + + A BIB MUST NOT be processed if the security target of the BIB is also + the security target of a BCB in the bundle. Given the order of + operations mandated by this specification, when both a BIB and a BCB + share a security target, it means that the security target must have + been encrypted after it was integrity signed; therefore, the BIB + cannot be verified until the security target has been decrypted by + processing the BCB. + + If the security policy of a node specifies that a node should have + applied integrity to a specific security target and no such BIB is + present in the bundle, then the node MUST process this security + target in accordance with the security policy. It is RECOMMENDED + that the node remove the security target from the bundle if the + security target is not the payload or primary block. If the security + target is the payload or primary block, the bundle MAY be discarded. + This action can occur at any node that has the ability to verify an + integrity signature, not just the bundle destination. + + If a receiving node is not the security acceptor of a security + operation in a BIB, it MAY attempt to verify the security operation + anyway to prevent forwarding corrupt data. If the verification + fails, the node SHALL process the security target in accordance with + local security policy. If a payload integrity check fails at a + waypoint, it is RECOMMENDED that it be processed in the same way as a + failure of a payload integrity check at the bundle destination. If + the check passes, the node MUST NOT remove the security operation + from the BIB prior to forwarding. + + If a BIB contains multiple security operations, each operation + processed by the node MUST be treated as if the security operation + has been represented by a single BIB with a single security operation + for the purposes of report generation and policy processing. + +5.2. Bundle Fragmentation and Reassembly + + If it is necessary for a node to fragment a bundle payload, and + security services have been applied to that bundle, the fragmentation + rules described in [RFC9171] MUST be followed. As defined there and + summarized here for completeness, only the payload block can be + fragmented; security blocks, like all extension blocks, can never be + fragmented. + + Due to the complexity of payload-block fragmentation, including the + possibility of fragmenting payload-block fragments, integrity and + confidentiality operations are not to be applied to a bundle + representing a fragment. Specifically, a BCB or BIB MUST NOT be + added to a bundle if the "Bundle is a fragment" flag is set in the + bundle processing control flags field. + + Security processing in the presence of payload-block fragmentation + may be handled by other mechanisms outside of the BPSec protocol or + by applying BPSec blocks in coordination with an encapsulation + mechanism. A node should apply any confidentiality protection prior + to performing any fragmentation. + +6. Key Management + + There exists a myriad of ways to establish, communicate, and + otherwise manage key information in DTN. Certain DTN deployments + might follow established protocols for key management, whereas other + DTN deployments might require new and novel approaches. BPSec + assumes that key management is handled as a separate part of network + management; this specification neither defines nor requires a + specific strategy for key management. + +7. Security Policy Considerations + + When implementing BPSec, several policy decisions must be considered. + This section describes key policies that affect the generation, + forwarding, and receipt of bundles that are secured using this + specification. No single set of policy decisions is envisioned to + work for all secure DTN deployments. + + * If a bundle is received that contains combinations of security + operations that are disallowed by this specification, the BPA must + determine how to handle the bundle: the bundle may be discarded, + the block affected by the security operation may be discarded, or + one security operation may be favored over another. + + * BPAs in the network must understand what security operations they + should apply to bundles. This decision may be based on the source + of the bundle, the destination of the bundle, or some other + information related to the bundle. + + * If a waypoint has been configured to add a security operation to a + bundle, and the received bundle already has the security operation + applied, then the receiver must understand what to do. The + receiver may discard the bundle, discard the security target and + associated BPSec blocks, replace the security operation, or take + some other action. + + * It is RECOMMENDED that security operations be applied to every + block in a bundle and that the default behavior of a BPA be to use + the security services defined in this specification. Designers + should only deviate from the use of security operations when the + deviation can be justified -- such as when doing so causes + downstream errors when processing blocks whose contents must be + inspected or changed at one or more hops along the path. + + * BCB security contexts can alter the size of extension blocks and + the payload block. Security policy SHOULD consider how changes to + the size of a block could negatively effect bundle processing + (e.g., calculating storage needs and scheduling transmission + times). + + * Adding a BIB to a security target that has already been encrypted + by a BCB is not allowed. If this condition is likely to be + encountered, there are (at least) three possible policies that + could handle this situation. + + 1. At the time of encryption, a security context can be selected + that computes a plaintext integrity-protection mechanism that + is included as a security context result field. + + 2. The encrypted block may be replicated as a new block with a + new block number and may be given integrity protection. + + 3. An encapsulation scheme may be applied to encapsulate the + security target (or the entire bundle) such that the + encapsulating structure is, itself, no longer the security + target of a BCB and may therefore be the security target of a + BIB. + + * Security policy SHOULD address whether cipher suites whose + ciphertext is larger than the initial plaintext are permitted and, + if so, for what types of blocks. Changing the size of a block may + cause processing difficulties for networks that calculate block + offsets into bundles or predict transmission times or storage + availability as a function of bundle size. In other cases, + changing the size of a payload as part of encryption has no + significant impact. + +7.1. Security Reason Codes + + BPAs must process blocks and bundles in accordance with both BP + policy and BPSec policy. The decision to receive, forward, deliver, + or delete a bundle may be communicated to the report-to address of + the bundle in the form of a status report, as a method of tracking + the progress of the bundle through the network. The status report + for a bundle may be augmented with a "reason code" explaining why the + particular action was taken on the bundle. + + This section describes a set of reason codes associated with the + security processing of a bundle. The communication of security- + related status reports might reduce the security of a network if + these reports are intercepted by unintended recipients. BPSec policy + SHOULD specify the conditions in which sending security reason codes + are appropriate. Examples of appropriate conditions for the use of + security reason codes could include the following. + + * When the report-to address is verified as unchanged from the + bundle source. This can occur by placing an appropriate BIB on + the bundle primary block. + + * When the block containing a status report with a security reason + code is encrypted by a BCB. + + * When a status report containing a security reason code is only + sent for security issues relating to bundles and/or blocks + associated with non-operational user data or test data. + + * When a status report containing a security reason code is only + sent for security issues associated with non-operational security + contexts, or security contexts using non-operational + configurations, such as test keys. + + Security reason codes are assigned in accordance with Section 11.2 + and are as described below. + + Missing security operation: + This reason code indicates that a bundle was missing one or + more required security operations. This reason code is + typically used by a security verifier or security acceptor. + + Unknown security operation: + This reason code indicates that one or more security operations + present in a bundle cannot be understood by the security + verifier or security acceptor for the operation. For example, + this reason code may be used if a security block references an + unknown security context identifier or security context + parameter. This reason code should not be used for security + operations for which the node is not a security verifier or + security acceptor; there is no requirement that all nodes in a + network understand all security contexts, security context + parameters, and security services for every bundle in a + network. + + Unexpected security operation: + This reason code indicates that a receiving node is neither a + security verifier nor a security acceptor for at least one + security operation in a bundle. This reason code should not be + seen as an error condition: not every node is a security + verifier or security acceptor for every security operation in + every bundle. In certain networks, this reason code may be + useful in identifying misconfigurations of security policy. + + Failed security operation: + This reason code indicates that one or more security operations + in a bundle failed to process as expected for reasons other + than misconfiguration. This may occur when a security-source + is unable to add a security block to a bundle. This may occur + if the target of a security operation fails to verify using the + defined security context at a security verifier. This may also + occur if a security operation fails to be processed without + error at a security acceptor. + + Conflicting security operation: + This reason code indicates that two or more security operations + in a bundle are not conformant with the BPSec specification and + that security processing was unable to proceed because of a + BPSec protocol violation. + +8. Security Considerations + + Given the nature of DTN applications, it is expected that bundles may + traverse a variety of environments and devices that each pose unique + security risks and requirements on the implementation of security + within BPSec. For this reason, it is important to introduce key + threat models and describe the roles and responsibilities of the + BPSec protocol in protecting the confidentiality and integrity of the + data against those threats. This section provides additional + discussion on security threats that BPSec will face and describes how + BPSec security mechanisms operate to mitigate these threats. + + The threat model described here is assumed to have a set of + capabilities identical to those described by the Internet Threat + Model in [RFC3552], but the BPSec threat model is scoped to + illustrate threats specific to BPSec operating within DTN + environments; therefore, it focuses on on-path attackers (OPAs). In + doing so, it is assumed that the delay-tolerant network (or + significant portions of the delay-tolerant network) are completely + under the control of an attacker. + +8.1. Attacker Capabilities and Objectives + + BPSec was designed to protect against OPA threats that may have + access to a bundle during transit from its source, Alice, to its + destination, Bob. An OPA node, Olive, is a noncooperative node + operating on the delay-tolerant network between Alice and Bob that + has the ability to receive bundles, examine bundles, modify bundles, + forward bundles, and generate bundles at will in order to compromise + the confidentiality or integrity of data within the delay-tolerant + network. There are three classes of OPA nodes that are + differentiated based on their access to cryptographic material: + + Unprivileged Node: Olive has not been provisioned within the secure + environment and only has access to cryptographic material that has + been publicly shared. + + Legitimate Node: Olive is within the secure environment; therefore, + Olive has access to cryptographic material that has been + provisioned to Olive (i.e., K_M) as well as material that has been + publicly shared. + + Privileged Node: Olive is a privileged node within the secure + environment; therefore, Olive has access to cryptographic material + that has been provisioned to Olive, Alice, and/or Bob (i.e., K_M, + K_A, and/or K_B) as well as material that has been publicly + shared. + + If Olive is operating as a privileged node, this is tantamount to + compromise; BPSec does not provide mechanisms to detect or remove + Olive from the delay-tolerant network or BPSec secure environment. + It is up to the BPSec implementer or the underlying cryptographic + mechanisms to provide appropriate capabilities if they are needed. + It should also be noted that if the implementation of BPSec uses a + single set of shared cryptographic material for all nodes, a + legitimate node is equivalent to a privileged node because K_M == K_A + == K_B. For this reason, sharing cryptographic material in this way + is not recommended. + + A special case of the legitimate node is when Olive is either Alice + or Bob (i.e., K_M == K_A or K_M == K_B). In this case, Olive is able + to impersonate traffic as either Alice or Bob, respectively, which + means that traffic to and from that node can be decrypted and + encrypted, respectively. Additionally, messages may be signed as + originating from one of the endpoints. + +8.2. Attacker Behaviors and BPSec Mitigations + +8.2.1. Eavesdropping Attacks + + Once Olive has received a bundle, she is able to examine the contents + of that bundle and attempt to recover any protected data or + cryptographic keying material from the blocks contained within. The + protection mechanism that BPSec provides against this action is the + BCB, which encrypts the contents of its security target, providing + confidentiality of the data. Of course, it should be assumed that + Olive is able to attempt offline recovery of encrypted data, so the + cryptographic mechanisms selected to protect the data should provide + a suitable level of protection. + + When evaluating the risk of eavesdropping attacks, it is important to + consider the lifetime of bundles on DTN. Depending on the network, + bundles may persist for days or even years. Long-lived bundles imply + that the data exists in the network for a longer period of time and, + thus, there may be more opportunities to capture those bundles. + Additionally, the implication is that long-lived bundles store + information within that remains relevant and sensitive for long + enough that, once captured, there is sufficient time to crack + encryption associated with the bundle. If a bundle does persist on + the network for years and the cipher suite used for a BCB provides + inadequate protection, Olive may be able to recover the protected + data either before that bundle reaches its intended destination or + before the information in the bundle is no longer considered + sensitive. + + NOTE: Olive is not limited by the bundle lifetime and may retain a + given bundle indefinitely. + + NOTE: Irrespective of whether BPSec is used, traffic analysis will be + possible. + +8.2.2. Modification Attacks + + As a node participating in the delay-tolerant network between Alice + and Bob, Olive will also be able to modify the received bundle, + including non-BPSec data such as the primary block, payload blocks, + or block processing control flags as defined in [RFC9171]. Olive + will be able to undertake activities including modification of data + within the blocks, replacement of blocks, addition of blocks, or + removal of blocks. Within BPSec, both the BIB and BCB provide + integrity-protection mechanisms to detect or prevent data + manipulation attempts by Olive. + + The BIB provides that protection to another block that is its + security target. The cryptographic mechanisms used to generate the + BIB should be strong against collision attacks, and Olive should not + have access to the cryptographic material used by the originating + node to generate the BIB (e.g., K_A). If both of these conditions + are true, Olive will be unable to modify the security target or the + BIB, and thus she cannot lead Bob to validate the security target as + originating from Alice. + + Since BPSec security operations are implemented by placing blocks in + a bundle, there is no in-band mechanism for detecting or correcting + certain cases where Olive removes blocks from a bundle. If Olive + removes a BCB, but keeps the security target, the security target + remains encrypted and there is a possibility that there may no longer + be sufficient information to decrypt the block at its destination. + If Olive removes both a BCB (or BIB) and its security target, there + is no evidence left in the bundle of the security operation. + Similarly, if Olive removes the BIB, but not the security target, + there is no evidence left in the bundle of the security operation. + In each of these cases, the implementation of BPSec must be combined + with policy configuration at endpoints in the network that describe + the expected and required security operations that must be applied on + transmission and that are expected to be present on receipt. This or + other similar out-of-band information is required to correct for + removal of security information in the bundle. + + A limitation of the BIB may exist within the implementation of BIB + validation at the destination node. If Olive is a legitimate node + within the delay-tolerant network, the BIB generated by Alice with + K_A can be replaced with a new BIB generated with K_M and forwarded + to Bob. If Bob is only validating that the BIB was generated by a + legitimate user, Bob will acknowledge the message as originating from + Olive instead of Alice. Validating a BIB indicates only that the BIB + was generated by a holder of the relevant key; it does not provide + any guarantee that the bundle or block was created by the same + entity. In order to provide verifiable integrity checks, the BCB + should require an encryption scheme that is Indistinguishable under + adaptive Chosen Ciphertext Attack (IND-CCA2) secure. Such an + encryption scheme will guard against signature substitution attempts + by Olive. In this case, Alice creates a BIB with the protected data + block as the security target and then creates a BCB with both the BIB + and protected data block as its security targets. + +8.2.3. Topology Attacks + + If Olive is in an OPA position within the delay-tolerant network, she + is able to influence how any bundles that come to her may pass + through the network. Upon receiving and processing a bundle that + must be routed elsewhere in the network, Olive has three options as + to how to proceed: not forward the bundle, forward the bundle as + intended, or forward the bundle to one or more specific nodes within + the network. + + Attacks that involve rerouting the bundles throughout the network are + essentially a special case of the modification attacks described in + this section, one where the attacker is modifying fields within the + primary block of the bundle. Given that BPSec cannot encrypt the + contents of the primary block, alternate methods must be used to + prevent this situation. These methods may include requiring BIBs for + primary blocks, using encapsulation, or otherwise strategically + manipulating primary block data. The details of any such mitigation + technique are specific to the implementation of the deploying network + and are outside of the scope of this document. + + Furthermore, routing rules and policies may be useful in enforcing + particular traffic flows to prevent topology attacks. While these + rules and policies may utilize some features provided by BPSec, their + definition is beyond the scope of this specification. + +8.2.4. Message Injection + + Olive is also able to generate new bundles and transmit them into the + delay-tolerant network at will. These bundles may be either 1) + copies or slight modifications of previously observed bundles (i.e., + a replay attack) or 2) entirely new bundles generated based on the + Bundle Protocol, BPSec, or other bundle-related protocols. With + these attacks, Olive's objectives may vary, but may be targeting + either the Bundle Protocol or application-layer protocols conveyed by + the Bundle Protocol. The target could also be the storage and + computing capabilities of the nodes running the bundle or + application-layer protocols (e.g., a denial of service to flood on + the storage of the store-and-forward mechanism or a computation that + would process the bundles and perhaps prevent other activities). + + BPSec relies on cipher suite capabilities to prevent replay or forged + message attacks. A BCB used with appropriate cryptographic + mechanisms may provide replay protection under certain circumstances. + Alternatively, application data itself may be augmented to include + mechanisms to assert data uniqueness and then be protected with a + BIB, a BCB, or both along with other block data. In such a case, the + receiving node would be able to validate the uniqueness of the data. + + For example, a BIB may be used to validate the integrity of a + bundle's primary block, which includes a timestamp and lifetime for + the bundle. If a bundle is replayed outside of its lifetime, then + the replay attack will fail as the bundle will be discarded. + Similarly, additional blocks, such as the Bundle Age, may be signed + and validated to identify replay attacks. Finally, security context + parameters within BIBs and BCBs may include anti-replay mechanisms + such as session identifiers, nonces, and dynamic passwords as + supported by network characteristics. + +9. Security Context Considerations + +9.1. Mandating Security Contexts + + Because of the diversity of networking scenarios and node + capabilities that may utilize BPSec, there is a risk that a single + security context mandated for every possible BPSec implementation is + not feasible. For example, a security context appropriate for a + resource-constrained node with limited connectivity may be + inappropriate for use in a well-resourced, well-connected node. + + This does not mean that the use of BPSec in a particular network is + meant to happen without security contexts for interoperability and + default behavior. Network designers must identify the minimal set of + security contexts necessary for functions in their network. For + example, a default set of security contexts could be created for use + over the terrestrial Internet, and they could be required by any + BPSec implementation communicating over the terrestrial Internet. + + To ensure interoperability among various implementations, all BPSec + implementations MUST support at least the current, mandatory security + context(s) defined in IETF Standards Track RFCs. As of this writing, + that BP mandatory security context is specified in [RFC9173], but the + mandatory security context(s) might change over time in accordance + with usual IETF processes. Such changes are likely to occur in the + future if/when flaws are discovered in the applicable cryptographic + algorithms, for example. + + Additionally, BPSec implementations need to support the security + contexts that are required by the BP networks in which they are + deployed. + + If a node serves as a gateway between two or more networks, the BPSec + implementation at that node needs to support the union of security + contexts mandated in those networks. + + BPSec has been designed to allow for a diversity of security contexts + and for new contexts to be defined over time. The use of different + security contexts does not change the BPSec protocol itself, and the + definition of new security contexts MUST adhere to the requirements + of such contexts as presented in this section and generally in this + specification. + + Implementers should monitor the state of security context + specifications to check for future updates and replacement. + +9.2. Identification and Configuration + + Security blocks uniquely identify the security context to be used in + the processing of their security services. The security context for + a security block MUST be uniquely identifiable and MAY use parameters + for customization. + + To reduce the number of security contexts used in a network, security + context designers should make security contexts customizable through + the definition of security context parameters. For example, a single + security context could be associated with a single cipher suite and + security context parameters could be used to configure the use of + this security context with different key lengths and different key + management options without needing to define separate security + contexts for each possible option. + + A single security context may be used in the application of more than + one security service. This means that a security context identifier + MAY be used with a BIB, with a BCB, or with any other BPSec-compliant + security block. The definition of a security context MUST identify + which security services may be used with the security context, how + security context parameters are interpreted as a function of the + security operation being supported, and which security results are + produced for each security service. + + Network operators must determine the number, type, and configuration + of security contexts in a system. Networks with rapidly changing + configurations may define relatively few security contexts with each + context customized with multiple parameters. For networks with more + stability, or an increased need for confidentiality, a larger number + of contexts can be defined with each context supporting few, if any, + parameters. + + +=============+============+=======================================+ + | Context | Parameters | Definition | + | Type | | | + +=============+============+=======================================+ + | Key | Encrypted | AES-GCM-256 cipher suite with | + | Exchange | Key, IV | provided ephemeral key encrypted with | + | AES | | a predetermined key encryption key | + | | | and cleartext initialization vector. | + +-------------+------------+---------------------------------------+ + | Pre-Shared | IV | AES-GCM-256 cipher suite with | + | Key AES | | predetermined key and predetermined | + | | | key-rotation policy. | + +-------------+------------+---------------------------------------+ + | Out-of-Band | None | AES-GCM-256 cipher suite with all | + | AES | | info predetermined. | + +-------------+------------+---------------------------------------+ + + Table 1: Security Context Examples + +9.3. Authorship + + Developers or implementers should consider the diverse performance + and conditions of networks on which the Bundle Protocol (and, + therefore, BPSec) will operate. Specifically, the delay and capacity + of DTNs can vary substantially. Developers should consider these + conditions to better describe the conditions in which those contexts + will operate or exhibit vulnerability, and selection of these + contexts for implementation should be made with consideration for + this reality. There are key differences that may limit the + opportunity for a security context to leverage existing cipher suites + and technologies that have been developed for use in more reliable + networks: + + Data Lifetime: Depending on the application environment, bundles may + persist on the network for extended periods of time, perhaps even + years. Cryptographic algorithms should be selected to ensure + protection of data against attacks for a length of time reasonable + for the application. + + One-Way Traffic: Depending on the application environment, it is + possible that only a one-way connection may exist between two + endpoints, or if a two-way connection does exist, the round-trip + time may be extremely large. This may limit the utility of + session key generation mechanisms, such as Diffie-Hellman, as a + two-way handshake may not be feasible or reliable. + + Opportunistic Access: Depending on the application environment, a + given endpoint may not be guaranteed to be accessible within a + certain amount of time. This may make asymmetric cryptographic + architectures that rely on a key distribution center or other + trust center impractical under certain conditions. + + When developing security contexts for use with BPSec, the following + information SHOULD be considered for inclusion in these + specifications. + + Security Context Parameters: Security contexts MUST define their + parameter Ids, the data types of those parameters, and their CBOR + encoding. + + Security Results: Security contexts MUST define their security + result Ids, the data types of those results, and their CBOR + encoding. + + New Canonicalizations: Security contexts may define new + canonicalization algorithms as necessary. + + Ciphertext Size: Security contexts MUST state whether their + associated cipher suites generate ciphertext (to include any + authentication information) that is of a different size than the + input plaintext. + + If a security context does not wish to alter the size of the + plaintext, it should place overflow bytes and authentication tags + in security result fields. + + Block Header Information: Security contexts SHOULD include block + header information that is considered to be immutable for the + block. This information MAY include the block type code, block + number, CRC type, and CRC field (if present or if missing and + unlikely to be added later), and possibly certain block processing + control flags. Designers should input these fields as additional + data for integrity protection when these fields are expected to + remain unchanged over the path the block will take from the + security source to the security acceptor. Security contexts + considering block header information MUST describe expected + behavior when these fields fail their integrity verification. + + Handling CRC Fields: Security contexts may include algorithms that + alter the contexts of their security target block, such as the + case when encrypting the block-type-specific data of a target + block as part of a BCB confidentiality service. Security context + specifications SHOULD address how preexisting CRC type and CRC + value fields be handled. For example, a BCB security context + could remove the plaintext CRC value from its target upon + encryption and replace or recalculate the value upon decryption. + +10. Defining Other Security Blocks + + Other Security Blocks (OSBs) may be defined and used in addition to + the security blocks identified in this specification. BIB, BCB, and + any future OSBs can coexist within a bundle and can be considered in + conformance with BPSec if all of the following requirements are met + by any future identified security blocks. + + * OSBs MUST NOT reuse any enumerations identified in this + specification, to include the block type codes for BIB and BCB. + + * An OSB definition MUST state whether it can be the target of a BIB + or a BCB. The definition MUST also state whether the OSB can + target a BIB or a BCB. + + * An OSB definition MUST provide a deterministic processing order in + the event that a bundle is received containing BIBs, BCBs, and + OSBs. This processing order MUST NOT alter the BIB and BCB + processing orders identified in this specification. + + * An OSB definition MUST provide a canonicalization algorithm if the + default algorithm for non-primary-block canonicalization cannot be + used to generate a deterministic input for a cipher suite. This + requirement can be waived if the OSB is defined so as to never be + the security target of a BIB or a BCB. + + * An OSB definition MUST NOT require any behavior of a BPSec BPA + that is in conflict with the behavior identified in this + specification. In particular, the security processing + requirements imposed by this specification must be consistent + across all BPSec BPAs in a network. + + * The behavior of an OSB when dealing with fragmentation must be + specified and MUST NOT lead to ambiguous processing states. In + particular, an OSB definition should address how to receive and + process an OSB in a bundle fragment that may or may not also + contain its security target. An OSB definition should also + address whether an OSB may be added to a bundle marked as a + fragment. + + Additionally, policy considerations for the management, monitoring, + and configuration associated with blocks SHOULD be included in any + OSB definition. + + NOTE: The burden of showing compliance with processing rules is + placed upon the specifications defining new security blocks, and the + identification of such blocks shall not, alone, require maintenance + of this specification. + +11. IANA Considerations + + This specification includes fields that require registries managed by + IANA. + +11.1. Bundle Block Types + + This specification allocates two block types from the existing + "Bundle Block Types" registry defined in [RFC6255]. + + +=======+=======================+===============+ + | Value | Description | Reference | + +=======+=======================+===============+ + | 11 | Block Integrity | This document | + +-------+-----------------------+---------------+ + | 12 | Block Confidentiality | This document | + +-------+-----------------------+---------------+ + + Table 2: Additional Entries for the "Bundle + Block Types" Registry + + The "Bundle Block Types" registry notes whether a block type is meant + for use in BP version 6, BP version 7 (BPv7), or both. The two block + types defined in this specification are meant for use with BPv7. + +11.2. Bundle Status Report Reason Codes + + This specification allocates five reason codes from the existing + "Bundle Status Report Reason Codes" registry defined in [RFC6255]. + + +============+=======+============================+================+ + | BP Version | Value | Description | Reference | + +============+=======+============================+================+ + | 7 | 12 | Missing security operation | This document, | + | | | | Section 7.1 | + +------------+-------+----------------------------+----------------+ + | 7 | 13 | Unknown security operation | This document, | + | | | | Section 7.1 | + +------------+-------+----------------------------+----------------+ + | 7 | 14 | Unexpected security | This document, | + | | | operation | Section 7.1 | + +------------+-------+----------------------------+----------------+ + | 7 | 15 | Failed security operation | This document, | + | | | | Section 7.1 | + +------------+-------+----------------------------+----------------+ + | 7 | 16 | Conflicting security | This document, | + | | | operation | Section 7.1 | + +------------+-------+----------------------------+----------------+ + + Table 3: Additional Entries for the "Bundle Status Report Reason + Codes" Registry + +11.3. Security Context Identifiers + + BPSec has a Security Context Identifier field for which IANA has + created a new registry named "BPSec Security Context Identifiers". + Initial values for this registry are given below. + + The registration policy for this registry is Specification Required + (see [RFC8126]). + + The value range: signed 16-bit integer. + + +=======+=============+===============+ + | Value | Description | Reference | + +=======+=============+===============+ + | < 0 | Reserved | This document | + +-------+-------------+---------------+ + | 0 | Reserved | This document | + +-------+-------------+---------------+ + + Table 4: "BPSec Security Context + Identifier" Registry + + Negative security context identifiers are reserved for local/site- + specific uses. The use of 0 as a security context identifier is for + nonoperational testing purposes only. + +12. References + +12.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, + DOI 10.17487/RFC2119, March 1997, + <https://www.rfc-editor.org/info/rfc2119>. + + [RFC3552] Rescorla, E. and B. Korver, "Guidelines for Writing RFC + Text on Security Considerations", BCP 72, RFC 3552, + DOI 10.17487/RFC3552, July 2003, + <https://www.rfc-editor.org/info/rfc3552>. + + [RFC6255] Blanchet, M., "Delay-Tolerant Networking Bundle Protocol + IANA Registries", RFC 6255, DOI 10.17487/RFC6255, May + 2011, <https://www.rfc-editor.org/info/rfc6255>. + + [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC + 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, + May 2017, <https://www.rfc-editor.org/info/rfc8174>. + + [RFC8949] Bormann, C. and P. Hoffman, "Concise Binary Object + Representation (CBOR)", STD 94, RFC 8949, + DOI 10.17487/RFC8949, December 2020, + <https://www.rfc-editor.org/info/rfc8949>. + + [RFC9171] Burleigh, S., Fall, K., and E. Birrane, III, "Bundle + Protocol Version 7", RFC 9171, DOI 10.17487/RFC9171, + January 2022, <https://www.rfc-editor.org/info/rfc9171>. + + [RFC9173] Birrane, III, E., White, A., and S. Heiner, "Default + Security Contexts for Bundle Protocol Security (BPSec)", + RFC 9173, DOI 10.17487/RFC9173, January 2022, + <https://www.rfc-editor.org/info/rfc9173>. + +12.2. Informative References + + [RFC4838] Cerf, V., Burleigh, S., Hooke, A., Torgerson, L., Durst, + R., Scott, K., Fall, K., and H. Weiss, "Delay-Tolerant + Networking Architecture", RFC 4838, DOI 10.17487/RFC4838, + April 2007, <https://www.rfc-editor.org/info/rfc4838>. + + [RFC6257] Symington, S., Farrell, S., Weiss, H., and P. Lovell, + "Bundle Security Protocol Specification", RFC 6257, + DOI 10.17487/RFC6257, May 2011, + <https://www.rfc-editor.org/info/rfc6257>. + + [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for + Writing an IANA Considerations Section in RFCs", BCP 26, + RFC 8126, DOI 10.17487/RFC8126, June 2017, + <https://www.rfc-editor.org/info/rfc8126>. + +Acknowledgments + + The following participants contributed technical material, use cases, + and useful thoughts on the overall approach to this security + specification: Scott Burleigh of the IPNGROUP, Angela Hennessy of the + Laboratory for Telecommunications Sciences, Amy Alford and Cherita + Corbett of the Johns Hopkins University Applied Physics Laboratory + (JHU/APL), and Angela Dalton of AMD Research. + + Additionally, Benjamin Kaduk of Akamai Technologies provided a + detailed technical review that resulted in a stronger and more + precise specification. + +Authors' Addresses + + Edward J. Birrane, III + The Johns Hopkins University Applied Physics Laboratory + 11100 Johns Hopkins Rd. + Laurel, MD 20723 + United States of America + + Phone: +1 443 778 7423 + Email: Edward.Birrane@jhuapl.edu + + + Kenneth McKeever + The Johns Hopkins University Applied Physics Laboratory + 11100 Johns Hopkins Rd. + Laurel, MD 20723 + United States of America + + Phone: +1 443 778 2237 + Email: Ken.McKeever@jhuapl.edu |