doc: Add RFC documents

1 files changed, 223 insertions, 0 deletions

diff --git a/doc/rfc/rfc930.txt b/doc/rfc/rfc930.txt
new file mode 100644
index 0000000..691ac1e
--- /dev/null
+++ b/doc/rfc/rfc930.txt
@@ -0,0 +1,223 @@
+
+Network Working Group                                     Marvin Solomon
+Request for Comments: 930                                 Edward Wimmers
+Supersedes: RFC 884                    University of Wisconsin - Madison
+                                                            January 1985
+
+                      TELNET TERMINAL TYPE OPTION
+
+
+Status of This Memo
+
+   This RFC specifies a standard for the ARPA Internet community.  Hosts
+   on the ARPA Internet that exchange terminal type information within
+   the Telnet protocol are expected to adopt and implement this
+   standard.  Distribution of this memo is unlimited.
+
+   This standard supersedes RFC 884.  The only change is to specify that
+   the TERMINAL-TYPE IS sub-negotiation should be sent only in response
+   to the TERMINAL-TYPE SEND sub-negotiation.  See below for further
+   explanation.
+
+1. Command Name and Code
+
+   TERMINAL-TYPE    24
+
+2. Command Meanings
+
+   IAC WILL TERMINAL-TYPE
+
+      Sender is willing to send terminal type information in a
+      subsequent sub-negotiation
+
+   IAC WON'T TERMINAL-TYPE
+
+      Sender refuses to send terminal type information
+
+   IAC DO TERMINAL-TYPE
+
+      Sender is willing to receive terminal type information in a
+      subsequent sub-negotiation
+
+   IAC DON'T TERMINAL-TYPE
+
+      Sender refuses to accept terminal type information
+
+   IAC SB TERMINAL-TYPE SEND IAC SE
+
+      Sender requests receiver to transmit his (the receiver's) terminal
+      type. The code for SEND is 1. (See below.)
+
+
+
+
+
+Solomon & Wimmers                                               [Page 1]
+
+
+RFC 930                                                     January 1985
+Telnet Terminal Type Option
+
+
+   IAC SB TERMINAL-TYPE IS ... IAC SE
+
+      Sender is stating the name of his terminal type. The code for IS
+      is 0. (See below.)
+
+3. Default
+
+   WON'T TERMINAL-TYPE
+
+      Terminal type information will not be exchanged.
+
+   DON'T TERMINAL-TYPE
+
+      Terminal type information will not be exchanged.
+
+4. Motivation for the Option
+
+   This option allows a telnet server to determine the type of terminal
+   connected to a user telnet program.  The transmission of such
+   information does not immediately imply any change of processing.
+   However, the information may be passed to a process, which may alter
+   the data it sends to suit the particular characteristics of the
+   terminal. For example, some operating systems have a terminal driver
+   that accepts a code indicating the type of terminal being driven.
+   Using the TERMINAL TYPE and BINARY options, a telnet server program
+   on such a system could arrange to have terminals driven as if they
+   were directly connected, including such special functions as cursor
+   addressing, multiple colors, etc., not included in the Network
+   Virtual Terminal specification.  This option fits into the normal
+   structure of TELNET options by deferring the actual transfer of
+   status information to the SB command.
+
+5. Description of the Option
+
+   WILL and DO are used only to obtain and grant permission for future
+   discussion. The actual exchange of status information occurs within
+   option subcommands (IAC SB TERMINAL-TYPE...).
+
+   Once the two hosts have exchanged a WILL and a DO, the sender of the
+   DO TERMINAL-TYPE is free to request type information.  Only the
+   sender of the DO may send requests (IAC SB TERMINAL-TYPE SEND IAC SE)
+   and only the sender of the WILL may transmit actual type information
+   (within an IAC SB TERMINAL-TYPE IS ... IAC SE command).  Terminal
+   type information may not be sent spontaneously, but only in response
+   to a request.
+
+   The terminal type information is an NVT ASCII string.  Within this
+
+
+Solomon & Wimmers                                               [Page 2]
+
+
+RFC 930                                                     January 1985
+Telnet Terminal Type Option
+
+
+   string, upper and lower case are considered equivalent.  The complete
+   list of valid terminal type names can be found in the latest
+   "Assigned Numbers" RFC.
+
+   The following is an example of use of the option:
+
+      Host1: IAC DO TERMINAL-TYPE
+
+      Host2: IAC WILL TERMINAL-TYPE
+
+         (Host1 is now free to request status information at any time.)
+
+      Host1: IAC SB TERMINAL-TYPE SEND IAC SE
+
+      Host2: IAC SB TERMINAL-TYPE IS IBM-3278-2 IAC SE
+
+6.  Implementation Suggestions
+
+   The "terminal type" information may be any NVT ASCII string
+   meaningful to both ends of the negotiation.  The list of terminal
+   type names in "Assigned Numbers" is intended to minimize confusion
+   caused by alternative "spellings" of the terminal type.  For example,
+   confusion would arise if one party were to call a terminal
+   "IBM3278-2" while the other called it "IBM-3278/2".  There is no
+   negative acknowledgement for a terminal type that is not understood,
+   but certain other options (such as switching to BINARY mode) may be
+   refused if a valid terminal type name has not been specified.  In
+   some cases, a particular terminal may be known by more than one name,
+   for example a specific type and a more generic type.  In such cases,
+   the sender of the TERMINAL-TYPE IS command should reply to successive
+   TERMINAL-TYPE SEND commands with the various names, from most to
+   least specific.  In this way, a telnet server that does not
+   understand the first response can prompt for alternatives.  However,
+   it should cease sending TERMINAL-TYPE SEND commands after receiving
+   the same response two consecutive times.  Similarly, a sender should
+   indicate it has sent all available names by repeating the last one
+   sent.  Note that TERMINAL-TYPE IS must only be sent in response to a
+   request (TERMINAL-TYPE SEND), because a host that sent TERMINAL-TYPE
+   IS and then received TERMINAL-TYPE SEND couldn't determine whether
+   the other host was requesting a second option or the TERMINAL-TYPE
+   SEND and the TERMINAL-TYPE IS crossed in midstream.
+
+   The type "UNKNOWN" should be used if the type of the terminal is
+   unknown or unlikely to be recognized by the other party.
+
+
+
+
+
+Solomon & Wimmers                                               [Page 3]
+
+
+RFC 930                                                     January 1985
+Telnet Terminal Type Option
+
+
+   The complete and up-to-date list of terminal type names will be
+   maintained in the "Assigned Numbers".  The maximum length of a
+   terminal type name is 40 characters.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Solomon & Wimmers                                               [Page 4]
\ No newline at end of file