diff options
Diffstat (limited to 'doc/rfc/rfc6234.txt')
| -rw-r--r-- | doc/rfc/rfc6234.txt | 7115 |
1 files changed, 7115 insertions, 0 deletions
diff --git a/doc/rfc/rfc6234.txt b/doc/rfc/rfc6234.txt new file mode 100644 index 0000000..814568a --- /dev/null +++ b/doc/rfc/rfc6234.txt @@ -0,0 +1,7115 @@ + + + + + + +Internet Engineering Task Force (IETF) D. Eastlake 3rd +Request for Comments: 6234 Huawei +Obsoletes: 4634 T. Hansen +Updates: 3174 AT&T Labs +Category: Informational May 2011 +ISSN: 2070-1721 + + + US Secure Hash Algorithms + (SHA and SHA-based HMAC and HKDF) + +Abstract + + The United States of America has adopted a suite of Secure Hash + Algorithms (SHAs), including four beyond SHA-1, as part of a Federal + Information Processing Standard (FIPS), namely SHA-224, SHA-256, + SHA-384, and SHA-512. This document makes open source code + performing these SHA hash functions conveniently available to the + Internet community. The sample code supports input strings of + arbitrary bit length. Much of the text herein was adapted by the + authors from FIPS 180-2. + + This document replaces RFC 4634, fixing errata and adding code for an + HMAC-based extract-and-expand Key Derivation Function, HKDF (RFC + 5869). As with RFC 4634, code to perform SHA-based Hashed Message + Authentication Codes (HMACs) is also included. + +Status of This Memo + + This document is not an Internet Standards Track specification; it is + published for informational purposes. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Not all documents + approved by the IESG are a candidate for any level of Internet + Standard; see Section 2 of RFC 5741. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + http://www.rfc-editor.org/info/rfc6234. + + + + + + + + + +Eastlake & Hansen Informational [Page 1] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +Copyright Notice + + Copyright (c) 2011 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Eastlake & Hansen Informational [Page 2] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +Table of Contents + + 1. Overview of Contents ............................................4 + 2. Notation for Bit Strings and Integers ...........................5 + 3. Operations on Words .............................................6 + 4. Message Padding and Parsing .....................................8 + 4.1. SHA-224 and SHA-256 ........................................8 + 4.2. SHA-384 and SHA-512 ........................................9 + 5. Functions and Constants Used ...................................10 + 5.1. SHA-224 and SHA-256 .......................................10 + 5.2. SHA-384 and SHA-512 .......................................11 + 6. Computing the Message Digest ...................................12 + 6.1. SHA-224 and SHA-256 Initialization ........................12 + 6.2. SHA-224 and SHA-256 Processing ............................13 + 6.3. SHA-384 and SHA-512 Initialization ........................14 + 6.4. SHA-384 and SHA-512 Processing ............................15 + 7. HKDF- and SHA-Based HMACs ......................................17 + 7.1. SHA-Based HMACs ...........................................17 + 7.2. HKDF ......................................................17 + 8. C Code for SHAs, HMAC, and HKDF ................................17 + 8.1. The Header Files ..........................................21 + 8.1.1. The .h file ........................................21 + 8.1.2. stdint-example.h ...................................29 + 8.1.3. sha-private.h ......................................29 + 8.2. The SHA Code ..............................................30 + 8.2.1. sha1.c .............................................30 + 8.2.2. sha224-256.c .......................................39 + 8.2.3. sha384-512.c .......................................51 + 8.2.4. usha.c .............................................73 + 8.3. The HMAC Code .............................................79 + 8.4. The HKDF Code .............................................84 + 8.5. The Test Driver ...........................................91 + 9. Security Considerations .......................................123 + 10. Acknowledgements .............................................123 + 11. References ...................................................124 + 11.1. Normative References ....................................124 + 11.2. Informative References ..................................124 + Appendix: Changes from RFC 4634...................................126 + + + + + + + + + + + + + +Eastlake & Hansen Informational [Page 3] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +1. Overview of Contents + + This document includes specifications for the United States of + America (USA) Federal Information Processing Standard (FIPS) Secure + Hash Algorithms (SHAs), code to implement the SHAs, code to implement + HMAC (Hashed Message Authentication Code, [RFC2104]) based on the + SHAs, and code to implement HKDF (HMAC-based Key Derivation Function, + [RFC5869]) based on HMAC. Specifications for HMAC and HKDF are not + included as they appear elsewhere in the RFC series [RFC2104] + [RFC5869]. + + NOTE: Much of the text below is taken from [SHS], and the assertions + of the security of the hash algorithms described therein are made by + the US Government, the author of [SHS], not by the listed authors of + this document. See also [RFC6194] concerning the security of SHA-1. + + The text below specifies Secure Hash Algorithms, SHA-224 [RFC3874], + SHA-256, SHA-384, and SHA-512, for computing a condensed + representation of a message or a data file. (SHA-1 is specified in + [RFC3174].) When a message of any length < 2^64 bits (for SHA-224 and + SHA-256) or < 2^128 bits (for SHA-384 and SHA-512) is input to one of + these algorithms, the result is an output called a message digest. + The message digests range in length from 224 to 512 bits, depending + on the algorithm. Secure Hash Algorithms are typically used with + other cryptographic algorithms, such as digital signature algorithms + and keyed-hash authentication codes, the generation of random numbers + [RFC4086], or in key derivation functions. + + The algorithms specified in this document are called secure because + it is computationally infeasible to (1) find a message that + corresponds to a given message digest, or (2) find two different + messages that produce the same message digest. Any change to a + message in transit will, with very high probability, result in a + different message digest. This will result in a verification failure + when the Secure Hash Algorithm is used with a digital signature + algorithm or a keyed-hash message authentication algorithm. + + The code provided herein supports input strings of arbitrary bit + length. SHA-1's sample code from [RFC3174] has also been updated to + handle input strings of arbitrary bit length. Permission is granted + for all uses, commercial and non-commercial, of this code. + + This document obsoletes [RFC4634], and the changes from that RFC are + summarized in the Appendix. + + + + + + + +Eastlake & Hansen Informational [Page 4] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + ASN.1 OIDs (Object Identifiers) for the SHA algorithms, taken from + [RFC4055], are as follows: + + id-sha1 OBJECT IDENTIFIER ::= { iso(1) + identified-organization(3) oiw(14) + secsig(3) algorithms(2) 26 } + id-sha224 OBJECT IDENTIFIER ::= {{ joint-iso-itu-t(2) + country(16) us(840) organization(1) gov(101) + csor(3) nistalgorithm(4) hashalgs(2) 4 } + id-sha256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) + country(16) us(840) organization(1) gov(101) + csor(3) nistalgorithm(4) hashalgs(2) 1 } + id-sha384 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) + country(16) us(840) organization(1) gov(101) + csor(3) nistalgorithm(4) hashalgs(2) 2 } + id-sha512 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) + country(16) us(840) organization(1) gov(101) + csor(3) nistalgorithm(4) hashalgs(2) 3 } + + Section 2 below defines the terminology and functions used as + building blocks to form these algorithms. Section 3 describes the + fundamental operations on words from which these algorithms are + built. Section 4 describes how messages are padded up to an integral + multiple of the required block size and then parsed into blocks. + Section 5 defines the constants and the composite functions used to + specify the hash algorithms. Section 6 gives the actual + specification for the SHA-224, SHA-256, SHA-384, and SHA-512 + functions. Section 7 provides pointers to the specification of HMAC + keyed message authentication codes and to the specification of an + extract-and-expand key derivation function based on HMAC. + + Section 8 gives sample code for the SHA algorithms, for SHA-based + HMACs, and for HMAC-based extract-and-expand key derivation function. + +2. Notation for Bit Strings and Integers + + The following terminology related to bit strings and integers will be + used: + + a. A hex digit is an element of the set {0, 1, ... , 9, A, ... , F}. + A hex digit is the representation of a 4-bit string. Examples: 7 + = 0111, A = 1010. + + b. A word equals a 32-bit or 64-bit string that may be represented + as a sequence of 8 or 16 hex digits, respectively. To convert a + word to hex digits, each 4-bit string is converted to its hex + equivalent as described in (a) above. Example: + + + + +Eastlake & Hansen Informational [Page 5] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + 1010 0001 0000 0011 1111 1110 0010 0011 = A103FE23. + + Throughout this document, the "big-endian" convention is used when + expressing both 32-bit and 64-bit words, so that within each word + the most significant bit is shown in the leftmost bit position. + + c. An integer may be represented as a word or pair of words. + + An integer between 0 and 2^32 - 1 inclusive may be represented as + a 32-bit word. The least significant four bits of the integer are + represented by the rightmost hex digit of the word representation. + Example: the integer 291 = 2^8+2^5+2^1+2^0 = 256+32+2+1 is + represented by the hex word 00000123. + + The same holds true for an integer between 0 and 2^64-1 inclusive, + which may be represented as a 64-bit word. + + If Z is an integer, 0 <= z < 2^64, then z = (2^32)x + y where + 0 <= x < 2^32 and 0 <= y < 2^32. Since x and y can be represented + as words X and Y, respectively, z can be represented as the pair + of words (X,Y). + + Again, the "big-endian" convention is used and the most + significant word is in the leftmost word position for values + represented by multiple-words. + + d. block = 512-bit or 1024-bit string. A block (e.g., B) may be + represented as a sequence of 32-bit or 64-bit words. + +3. Operations on Words + + The following logical operators will be applied to words in all four + hash operations specified herein. SHA-224 and SHA-256 operate on + 32-bit words while SHA-384 and SHA-512 operate on 64-bit words. + + In the operations below, x<<n is obtained as follows: discard the + leftmost n bits of x and then pad the result with n zeroed bits on + the right (the result will still be the same number of bits). + Similarly, x>>n is obtained as follows: discard the rightmost n bits + of x and then prepend the result with n zeroed bits on the left (the + result will still be the same number of bits). + + a. Bitwise logical word operations + + X AND Y = bitwise logical "and" of X and Y. + + X OR Y = bitwise logical "inclusive-or" of X and Y. + + + + +Eastlake & Hansen Informational [Page 6] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + X XOR Y = bitwise logical "exclusive-or" of X and Y. + + NOT X = bitwise logical "complement" of X. + + Example: + 01101100101110011101001001111011 + XOR 01100101110000010110100110110111 + -------------------------------- + = 00001001011110001011101111001100 + + b. The operation X + Y is defined as follows: words X and Y represent + w-bit integers x and y, where 0 <= x < 2^w and 0 <= y < 2^w. For + positive integers n and m, let + + n mod m + + be the remainder upon dividing n by m. Compute + + z = (x + y) mod 2^w. + + Then 0 <= z < 2^w. Convert z to a word, Z, and define Z = X + Y. + + c. The right shift operation SHR^n(x), where x is a w-bit word and n + is an integer with 0 <= n < w, is defined by + + SHR^n(x) = x>>n + + d. The rotate right (circular right shift) operation ROTR^n(x), where + x is a w-bit word and n is an integer with 0 <= n < w, is defined + by + + ROTR^n(x) = (x>>n) OR (x<<(w-n)) + + e. The rotate left (circular left shift) operation ROTL^n(x), where x + is a w-bit word and n is an integer with 0 <= n < w, is defined by + + ROTL^n(X) = (x<<n) OR (x>>(w-n)) + + Note the following equivalence relationships, where w is fixed in + each relationship: + + ROTL^n(x) = ROTR^(w-n)(x) + + ROTR^n(x) = ROTL^(w-n)(x) + + + + + + + +Eastlake & Hansen Informational [Page 7] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +4. Message Padding and Parsing + + The hash functions specified herein are used to compute a message + digest for a message or data file that is provided as input. The + message or data file should be considered to be a bit string. The + length of the message is the number of bits in the message (the empty + message has length 0). If the number of bits in a message is a + multiple of 8, for compactness we can represent the message in hex. + The purpose of message padding is to make the total length of a + padded message a multiple of 512 for SHA-224 and SHA-256 or a + multiple of 1024 for SHA-384 and SHA-512. + + The following specifies how this padding shall be performed. As a + summary, a "1" followed by m "0"s followed by a 64-bit or 128-bit + integer are appended to the end of the message to produce a padded + message of length 512*n or 1024*n. The appended integer is the + length of the original message. The padded message is then processed + by the hash function as n 512-bit or 1024-bit blocks. + +4.1. SHA-224 and SHA-256 + + Suppose a message has length L < 2^64. Before it is input to the + hash function, the message is padded on the right as follows: + + a. "1" is appended. Example: if the original message is "01010000", + this is padded to "010100001". + + b. K "0"s are appended where K is the smallest, non-negative solution + to the equation + + ( L + 1 + K ) mod 512 = 448 + + c. Then append the 64-bit block that is L in binary representation. + After appending this block, the length of the message will be a + multiple of 512 bits. + + Example: Suppose the original message is the bit string + + 01100001 01100010 01100011 01100100 01100101 + + After step (a) this gives + + 01100001 01100010 01100011 01100100 01100101 1 + + + + + + + + +Eastlake & Hansen Informational [Page 8] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + Since L = 40, the number of bits in the above is 41 and K = 407 + "0"s are appended, making the total now 448. This gives the + following in hex: + + 61626364 65800000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 + + The 64-bit representation of L = 40 is hex 00000000 00000028. + Hence the final padded message is the following hex + + 61626364 65800000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000028 + +4.2. SHA-384 and SHA-512 + + Suppose a message has length L < 2^128. Before it is input to the + hash function, the message is padded on the right as follows: + + a. "1" is appended. Example: if the original message is "01010000", + this is padded to "010100001". + + b. K "0"s are appended where K is the smallest, non-negative solution + to the equation + + ( L + 1 + K ) mod 1024 = 896 + + c. Then append the 128-bit block that is L in binary representation. + After appending this block, the length of the message will be a + multiple of 1024 bits. + + Example: Suppose the original message is the bit string + + 01100001 01100010 01100011 01100100 01100101 + + After step (a) this gives + + 01100001 01100010 01100011 01100100 01100101 1 + + + + + + + + + + +Eastlake & Hansen Informational [Page 9] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + Since L = 40, the number of bits in the above is 41 and K = 855 + "0"s are appended, making the total now 896. This gives the + following in hex: + + 61626364 65800000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + + The 128-bit representation of L = 40 is hex 00000000 00000000 + 00000000 00000028. Hence the final padded message is the + following hex: + + 61626364 65800000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000000 + 00000000 00000000 00000000 00000028 + +5. Functions and Constants Used + + The following subsections give the six logical functions and the + table of constants used in each of the hash functions. + +5.1. SHA-224 and SHA-256 + + SHA-224 and SHA-256 use six logical functions, where each function + operates on 32-bit words, which are represented as x, y, and z. The + result of each function is a new 32-bit word. + + CH( x, y, z) = (x AND y) XOR ( (NOT x) AND z) + + MAJ( x, y, z) = (x AND y) XOR (x AND z) XOR (y AND z) + + BSIG0(x) = ROTR^2(x) XOR ROTR^13(x) XOR ROTR^22(x) + + BSIG1(x) = ROTR^6(x) XOR ROTR^11(x) XOR ROTR^25(x) + + SSIG0(x) = ROTR^7(x) XOR ROTR^18(x) XOR SHR^3(x) + + SSIG1(x) = ROTR^17(x) XOR ROTR^19(x) XOR SHR^10(x) + + + + +Eastlake & Hansen Informational [Page 10] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + SHA-224 and SHA-256 use the same sequence of sixty-four constant + 32-bit words, K0, K1, ..., K63. These words represent the first 32 + bits of the fractional parts of the cube roots of the first sixty- + four prime numbers. In hex, these constant words are as follows + (from left to right): + + 428a2f98 71374491 b5c0fbcf e9b5dba5 + 3956c25b 59f111f1 923f82a4 ab1c5ed5 + d807aa98 12835b01 243185be 550c7dc3 + 72be5d74 80deb1fe 9bdc06a7 c19bf174 + e49b69c1 efbe4786 0fc19dc6 240ca1cc + 2de92c6f 4a7484aa 5cb0a9dc 76f988da + 983e5152 a831c66d b00327c8 bf597fc7 + c6e00bf3 d5a79147 06ca6351 14292967 + 27b70a85 2e1b2138 4d2c6dfc 53380d13 + 650a7354 766a0abb 81c2c92e 92722c85 + a2bfe8a1 a81a664b c24b8b70 c76c51a3 + d192e819 d6990624 f40e3585 106aa070 + 19a4c116 1e376c08 2748774c 34b0bcb5 + 391c0cb3 4ed8aa4a 5b9cca4f 682e6ff3 + 748f82ee 78a5636f 84c87814 8cc70208 + 90befffa a4506ceb bef9a3f7 c67178f2 + +5.2. SHA-384 and SHA-512 + + SHA-384 and SHA-512 each use six logical functions, where each + function operates on 64-bit words, which are represented as x, y, and + z. The result of each function is a new 64-bit word. + + CH( x, y, z) = (x AND y) XOR ( (NOT x) AND z) + + MAJ( x, y, z) = (x AND y) XOR (x AND z) XOR (y AND z) + + BSIG0(x) = ROTR^28(x) XOR ROTR^34(x) XOR ROTR^39(x) + + BSIG1(x) = ROTR^14(x) XOR ROTR^18(x) XOR ROTR^41(x) + + SSIG0(x) = ROTR^1(x) XOR ROTR^8(x) XOR SHR^7(x) + + SSIG1(x) = ROTR^19(x) XOR ROTR^61(x) XOR SHR^6(x) + + SHA-384 and SHA-512 use the same sequence of eighty constant 64-bit + words, K0, K1, ... K79. These words represent the first 64 bits of + the fractional parts of the cube roots of the first eighty prime + numbers. In hex, these constant words are as follows (from left to + right): + + + + + +Eastlake & Hansen Informational [Page 11] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + 428a2f98d728ae22 7137449123ef65cd b5c0fbcfec4d3b2f e9b5dba58189dbbc + 3956c25bf348b538 59f111f1b605d019 923f82a4af194f9b ab1c5ed5da6d8118 + d807aa98a3030242 12835b0145706fbe 243185be4ee4b28c 550c7dc3d5ffb4e2 + 72be5d74f27b896f 80deb1fe3b1696b1 9bdc06a725c71235 c19bf174cf692694 + e49b69c19ef14ad2 efbe4786384f25e3 0fc19dc68b8cd5b5 240ca1cc77ac9c65 + 2de92c6f592b0275 4a7484aa6ea6e483 5cb0a9dcbd41fbd4 76f988da831153b5 + 983e5152ee66dfab a831c66d2db43210 b00327c898fb213f bf597fc7beef0ee4 + c6e00bf33da88fc2 d5a79147930aa725 06ca6351e003826f 142929670a0e6e70 + 27b70a8546d22ffc 2e1b21385c26c926 4d2c6dfc5ac42aed 53380d139d95b3df + 650a73548baf63de 766a0abb3c77b2a8 81c2c92e47edaee6 92722c851482353b + a2bfe8a14cf10364 a81a664bbc423001 c24b8b70d0f89791 c76c51a30654be30 + d192e819d6ef5218 d69906245565a910 f40e35855771202a 106aa07032bbd1b8 + 19a4c116b8d2d0c8 1e376c085141ab53 2748774cdf8eeb99 34b0bcb5e19b48a8 + 391c0cb3c5c95a63 4ed8aa4ae3418acb 5b9cca4f7763e373 682e6ff3d6b2b8a3 + 748f82ee5defb2fc 78a5636f43172f60 84c87814a1f0ab72 8cc702081a6439ec + 90befffa23631e28 a4506cebde82bde9 bef9a3f7b2c67915 c67178f2e372532b + ca273eceea26619c d186b8c721c0c207 eada7dd6cde0eb1e f57d4f7fee6ed178 + 06f067aa72176fba 0a637dc5a2c898a6 113f9804bef90dae 1b710b35131c471b + 28db77f523047d84 32caab7b40c72493 3c9ebe0a15c9bebc 431d67c49c100d4c + 4cc5d4becb3e42b6 597f299cfc657e2a 5fcb6fab3ad6faec 6c44198c4a475817 + +6. Computing the Message Digest + + The output of each of the secure hash functions, after being applied + to a message of N blocks, is the hash quantity H(N). For SHA-224 and + SHA-256, H(i) can be considered to be eight 32-bit words, H(i)0, + H(i)1, ... H(i)7. For SHA-384 and SHA-512, it can be considered to + be eight 64-bit words, H(i)0, H(i)1, ..., H(i)7. + + As described below, the hash words are initialized, modified as each + message block is processed, and finally concatenated after processing + the last block to yield the output. For SHA-256 and SHA-512, all of + the H(N) variables are concatenated while the SHA-224 and SHA-384 + hashes are produced by omitting some from the final concatenation. + +6.1. SHA-224 and SHA-256 Initialization + + For SHA-224, the initial hash value, H(0), consists of the following + 32-bit words in hex: + + H(0)0 = c1059ed8 + H(0)1 = 367cd507 + H(0)2 = 3070dd17 + H(0)3 = f70e5939 + H(0)4 = ffc00b31 + H(0)5 = 68581511 + H(0)6 = 64f98fa7 + H(0)7 = befa4fa4 + + + +Eastlake & Hansen Informational [Page 12] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + For SHA-256, the initial hash value, H(0), consists of the following + eight 32-bit words, in hex. These words were obtained by taking the + first 32 bits of the fractional parts of the square roots of the + first eight prime numbers. + + H(0)0 = 6a09e667 + H(0)1 = bb67ae85 + H(0)2 = 3c6ef372 + H(0)3 = a54ff53a + H(0)4 = 510e527f + H(0)5 = 9b05688c + H(0)6 = 1f83d9ab + H(0)7 = 5be0cd19 + +6.2. SHA-224 and SHA-256 Processing + + SHA-224 and SHA-256 perform identical processing on message blocks + and differ only in how H(0) is initialized and how they produce their + final output. They may be used to hash a message, M, having a length + of L bits, where 0 <= L < 2^64. The algorithm uses (1) a message + schedule of sixty-four 32-bit words, (2) eight working variables of + 32 bits each, and (3) a hash value of eight 32-bit words. + + The words of the message schedule are labeled W0, W1, ..., W63. The + eight working variables are labeled a, b, c, d, e, f, g, and h. The + words of the hash value are labeled H(i)0, H(i)1, ..., H(i)7, which + will hold the initial hash value, H(0), replaced by each successive + intermediate hash value (after each message block is processed), + H(i), and ending with the final hash value, H(N), after all N blocks + are processed. They also use two temporary words, T1 and T2. + + The input message is padded as described in Section 4.1 above, then + parsed into 512-bit blocks that are considered to be composed of + sixteen 32-bit words M(i)0, M(i)1, ..., M(i)15. The following + computations are then performed for each of the N message blocks. + All addition is performed modulo 2^32. + + For i = 1 to N + + 1. Prepare the message schedule W: + For t = 0 to 15 + Wt = M(i)t + For t = 16 to 63 + Wt = SSIG1(W(t-2)) + W(t-7) + SSIG0(w(t-15)) + W(t-16) + + + + + + + +Eastlake & Hansen Informational [Page 13] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + 2. Initialize the working variables: + a = H(i-1)0 + b = H(i-1)1 + c = H(i-1)2 + d = H(i-1)3 + e = H(i-1)4 + f = H(i-1)5 + g = H(i-1)6 + h = H(i-1)7 + + 3. Perform the main hash computation: + For t = 0 to 63 + T1 = h + BSIG1(e) + CH(e,f,g) + Kt + Wt + T2 = BSIG0(a) + MAJ(a,b,c) + h = g + g = f + f = e + e = d + T1 + d = c + c = b + b = a + a = T1 + T2 + + 4. Compute the intermediate hash value H(i) + H(i)0 = a + H(i-1)0 + H(i)1 = b + H(i-1)1 + H(i)2 = c + H(i-1)2 + H(i)3 = d + H(i-1)3 + H(i)4 = e + H(i-1)4 + H(i)5 = f + H(i-1)5 + H(i)6 = g + H(i-1)6 + H(i)7 = h + H(i-1)7 + + After the above computations have been sequentially performed for all + of the blocks in the message, the final output is calculated. For + SHA-256, this is the concatenation of all of H(N)0, H(N)1, through + H(N)7. For SHA-224, this is the concatenation of H(N)0, H(N)1, + through H(N)6. + +6.3. SHA-384 and SHA-512 Initialization + + For SHA-384, the initial hash value, H(0), consists of the following + eight 64-bit words, in hex. These words were obtained by taking the + first 64 bits of the fractional parts of the square roots of the + ninth through sixteenth prime numbers. + + + + + + +Eastlake & Hansen Informational [Page 14] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + H(0)0 = cbbb9d5dc1059ed8 + H(0)1 = 629a292a367cd507 + H(0)2 = 9159015a3070dd17 + H(0)3 = 152fecd8f70e5939 + H(0)4 = 67332667ffc00b31 + H(0)5 = 8eb44a8768581511 + H(0)6 = db0c2e0d64f98fa7 + H(0)7 = 47b5481dbefa4fa4 + + For SHA-512, the initial hash value, H(0), consists of the following + eight 64-bit words, in hex. These words were obtained by taking the + first 64 bits of the fractional parts of the square roots of the + first eight prime numbers. + + H(0)0 = 6a09e667f3bcc908 + H(0)1 = bb67ae8584caa73b + H(0)2 = 3c6ef372fe94f82b + H(0)3 = a54ff53a5f1d36f1 + H(0)4 = 510e527fade682d1 + H(0)5 = 9b05688c2b3e6c1f + H(0)6 = 1f83d9abfb41bd6b + H(0)7 = 5be0cd19137e2179 + +6.4. SHA-384 and SHA-512 Processing + + SHA-384 and SHA-512 perform identical processing on message blocks + and differ only in how H(0) is initialized and how they produce their + final output. They may be used to hash a message, M, having a length + of L bits, where 0 <= L < 2^128. The algorithm uses (1) a message + schedule of eighty 64-bit words, (2) eight working variables of 64 + bits each, and (3) a hash value of eight 64-bit words. + + The words of the message schedule are labeled W0, W1, ..., W79. The + eight working variables are labeled a, b, c, d, e, f, g, and h. The + words of the hash value are labeled H(i)0, H(i)1, ..., H(i)7, which + will hold the initial hash value, H(0), replaced by each successive + intermediate hash value (after each message block is processed), + H(i), and ending with the final hash value, H(N) after all N blocks + are processed. + + The input message is padded as described in Section 4.2 above, then + parsed into 1024-bit blocks that are considered to be composed of + sixteen 64-bit words M(i)0, M(i)1, ..., M(i)15. The following + computations are then performed for each of the N message blocks. + All addition is performed modulo 2^64. + + + + + + +Eastlake & Hansen Informational [Page 15] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + For i = 1 to N + + 1. Prepare the message schedule W: + For t = 0 to 15 + Wt = M(i)t + For t = 16 to 79 + Wt = SSIG1(W(t-2)) + W(t-7) + SSIG0(W(t-15)) + W(t-16) + + 2. Initialize the working variables: + a = H(i-1)0 + b = H(i-1)1 + c = H(i-1)2 + d = H(i-1)3 + e = H(i-1)4 + f = H(i-1)5 + g = H(i-1)6 + h = H(i-1)7 + + 3. Perform the main hash computation: + For t = 0 to 79 + T1 = h + BSIG1(e) + CH(e,f,g) + Kt + Wt + T2 = BSIG0(a) + MAJ(a,b,c) + h = g + g = f + f = e + e = d + T1 + d = c + c = b + b = a + a = T1 + T2 + + 4. Compute the intermediate hash value H(i) + H(i)0 = a + H(i-1)0 + H(i)1 = b + H(i-1)1 + H(i)2 = c + H(i-1)2 + H(i)3 = d + H(i-1)3 + H(i)4 = e + H(i-1)4 + H(i)5 = f + H(i-1)5 + H(i)6 = g + H(i-1)6 + H(i)7 = h + H(i-1)7 + + After the above computations have been sequentially performed for all + of the blocks in the message, the final output is calculated. For + SHA-512, this is the concatenation of all of H(N)0, H(N)1, through + H(N)7. For SHA-384, this is the concatenation of H(N)0, H(N)1, + through H(N)5. + + + + + +Eastlake & Hansen Informational [Page 16] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +7. HKDF- and SHA-Based HMACs + + Below are brief descriptions and pointers to more complete + descriptions and code for (1) SHA-based HMACs and (2) an HMAC-based + extract-and-expand key derivation function. Both HKDF and HMAC were + devised by Hugo Krawczyk. + +7.1. SHA-Based HMACs + + HMAC is a method for computing a keyed MAC (Message Authentication + Code) using a hash function as described in [RFC2104]. It uses a key + to mix in with the input text to produce the final hash. + + Sample code is also provided, in Section 8.3 below, to perform HMAC + based on any of the SHA algorithms described herein. The sample code + found in [RFC2104] was written in terms of a specified text size. + Since SHA is defined in terms of an arbitrary number of bits, the + sample HMAC code has been written to allow the text input to HMAC to + have an arbitrary number of octets and bits. A fixed-length + interface is also provided. + +7.2. HKDF + + HKDF is a specific Key Derivation Function (KDF), that is, a function + of initial keying material from which the KDF derives one or more + cryptographically strong secret keys. HKDF, which is described in + [RFC5869], is based on HMAC. + + Sample code for HKDF is provided in Section 8.4 below. + +8. C Code for SHAs, HMAC, and HKDF + + Below is a demonstration implementation of these secure hash + functions in C. Section 8.1 contains the header file sha.h that + declares all constants, structures, and functions used by the SHA and + HMAC functions. It includes conditionals based on the state of + definition of USE_32BIT_ONLY that, if that symbol is defined at + compile time, avoids 64-bit operations. It also contains sha- + private.h that provides some declarations common to all the SHA + functions. Section 8.2 contains the C code for sha1.c, sha224-256.c, + sha384-512.c, and usha.c. Section 8.3 contains the C code for the + HMAC functions, and Section 8.4 contains the C code for HKDF. + Section 8.5 contains a test driver to exercise the code. + + For each of the digest lengths $$$, there is the following set of + constants, a structure, and functions: + + + + + +Eastlake & Hansen Informational [Page 17] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + Constants: + SHA$$$HashSize number of octets in the hash + SHA$$$HashSizeBits number of bits in the hash + SHA$$$_Message_Block_Size + number of octets used in the intermediate + message blocks + Most functions return an enum value that is one of: + shaSuccess(0) on success + shaNull(1) when presented with a null pointer parameter + shaInputTooLong(2) when the input data is too long + shaStateError(3) when SHA$$$Input is called after + SHA$$$FinalBits or SHA$$$Result + + Structure: + typedef SHA$$$Context + an opaque structure holding the complete state + for producing the hash + + Functions: + int SHA$$$Reset(SHA$$$Context *context); + Reset the hash context state. + int SHA$$$Input(SHA$$$Context *context, const uint8_t *octets, + unsigned int bytecount); + Incorporate bytecount octets into the hash. + int SHA$$$FinalBits(SHA$$$Context *, const uint8_t octet, + unsigned int bitcount); + Incorporate bitcount bits into the hash. The bits are in + the upper portion of the octet. SHA$$$Input() cannot be + called after this. + int SHA$$$Result(SHA$$$Context *, + uint8_t Message_Digest[SHA$$$HashSize]); + Do the final calculations on the hash and copy the value + into Message_Digest. + + In addition, functions with the prefix USHA are provided that take a + SHAversion value (SHA$$$) to select the SHA function suite. They add + the following constants, structure, and functions: + + Constants: + shaBadParam(4) constant returned by USHA functions when + presented with a bad SHAversion (SHA$$$) + parameter or other illegal parameter values + USAMaxHashSize maximum of the SHA hash sizes + SHA$$$ SHAversion enumeration values, used by USHA, + HMAC, and HKDF functions to select the SHA + function suite + + + + + +Eastlake & Hansen Informational [Page 18] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + Structure: + typedef USHAContext + an opaque structure holding the complete state + for producing the hash + + Functions: + int USHAReset(USHAContext *context, SHAversion whichSha); + Reset the hash context state. + int USHAInput(USHAContext context*, + const uint8_t *bytes, unsigned int bytecount); + Incorporate bytecount octets into the hash. + int USHAFinalBits(USHAContext *context, + const uint8_t bits, unsigned int bitcount); + Incorporate bitcount bits into the hash. + int USHAResult(USHAContext *context, + uint8_t Message_Digest[USHAMaxHashSize]); + Do the final calculations on the hash and copy the value + into Message_Digest. Octets in Message_Digest beyond + USHAHashSize(whichSha) are left untouched. + int USHAHashSize(enum SHAversion whichSha); + The number of octets in the given hash. + int USHAHashSizeBits(enum SHAversion whichSha); + The number of bits in the given hash. + int USHABlockSize(enum SHAversion whichSha); + The internal block size for the given hash. + const char *USHAHashName(enum SHAversion whichSha); + This function will return the name of the given SHA + algorithm as a string. + + The HMAC functions follow the same pattern to allow any length of + text input to be used. + + Structure: + typedef HMACContext an opaque structure holding the complete state + for producing the keyed message digest (MAC) + + Functions: + int hmacReset(HMACContext *ctx, enum SHAversion whichSha, + const unsigned char *key, int key_len); + Reset the MAC context state. + int hmacInput(HMACContext *ctx, const unsigned char *text, + int text_len); + Incorporate text_len octets into the MAC. + int hmacFinalBits(HMACContext *ctx, const uint8_t bits, + unsigned int bitcount); + Incorporate bitcount bits into the MAC. + int hmacResult(HMACContext *ctx, + uint8_t Message_Digest[USHAMaxHashSize]); + + + +Eastlake & Hansen Informational [Page 19] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + Do the final calculations on the MAC and copy the value into + Message_Digest. Octets in Message_Digest beyond + USHAHashSize(whichSha) are left untouched. + + In addition, a combined interface is provided, similar to that shown + in [RFC2104], that allows a fixed-length text input to be used. + + int hmac(SHAversion whichSha, + const unsigned char *text, int text_len, + const unsigned char *key, int key_len, + uint8_t Message_Digest[USHAMaxHashSize]); + Calculate the given digest for the given text and key, and + return the resulting MAC. Octets in Message_Digest beyond + USHAHashSize(whichSha) are left untouched. + + The HKDF functions follow the same pattern to allow any length of + text input to be used. + + Structure: + typedef HKDFContext an opaque structure holding the complete state + for producing the keying material + Functions: + int hkdfReset(HKDFContext *context, enum SHAversion whichSha, + const unsigned char *salt, int salt_len) + Reset the key derivation state and initialize it with the + salt_len octets of the optional salt. + int hkdfInput(HKDFContext *context, const unsigned char *ikm, + int ikm_len) + Incorporate ikm_len octets into the entropy extractor. + int hkdfFinalBits(HKDFContext *context, uint8_t ikm_bits, + unsigned int ikm_bit_count) + Incorporate ikm_bit_count bits into the entropy extractor. + int hkdfResult(HKDFContext *context, + uint8_t prk[USHAMaxHashSize], + const unsigned char *info, int info_len, + uint8_t okm[ ], int okm_len) + Finish the HKDF extraction and perform the final HKDF + expansion, storing the okm_len octets into output keying + material (okm). Optionally store the pseudo-random key + (prk) that is generated internally. + + In addition, combined interfaces are provided, similar to that shown + in [RFC5869], that allows a fixed-length text input to be used. + + int hkdfExtract(SHAversion whichSha, + const unsigned char *salt, int salt_len, + const unsigned char *ikm, int ikm_len, + uint8_t prk[USHAMaxHashSize]) + + + +Eastlake & Hansen Informational [Page 20] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + Perform HKDF extraction, combining the salt_len octets of + the optional salt with the ikm_len octets of the input + keying material (ikm) to form the pseudo-random key prk. + The output prk must be large enough to hold the octets + appropriate for the given hash type. + + int hkdfExpand(SHAversion whichSha, + const uint8_t prk[ ], int prk_len, + const unsigned char *info, int info_len, + uint8_t okm[ ], int okm_len) + Perform HKDF expansion, combining the prk_len octets of the + pseudo-random key prk with the info_len octets of info to + form the okm_len octets stored in okm. + + int hkdf(SHAversion whichSha, + const unsigned char *salt, int salt_len, + const unsigned char *ikm, int ikm_len, + const unsigned char *info, int info_len, + uint8_t okm[ ], int okm_len) + This combined interface performs both HKDF extraction and + expansion. The variables are the same as in hkdfExtract() + and hkdfExpand(). + +8.1. The Header Files + +8.1.1. The .h file + + The following sha.h file, as stated in the comments within the file, + assumes that <stdint.h> is available on your system. If it is not, + you should change to including <stdint-example.h>, provided in + Section 8.1.2, or the like. + +/**************************** sha.h ****************************/ +/***************** See RFC 6234 for details. *******************/ +/* + Copyright (c) 2011 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, are permitted provided that the following + conditions are met: + + - Redistributions of source code must retain the above + copyright notice, this list of conditions and + the following disclaimer. + + + + + + +Eastlake & Hansen Informational [Page 21] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + - Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following + disclaimer in the documentation and/or other materials provided + with the distribution. + + - Neither the name of Internet Society, IETF or IETF Trust, nor + the names of specific contributors, may be used to endorse or + promote products derived from this software without specific + prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ +#ifndef _SHA_H_ +#define _SHA_H_ + +/* + * Description: + * This file implements the Secure Hash Algorithms + * as defined in the U.S. National Institute of Standards + * and Technology Federal Information Processing Standards + * Publication (FIPS PUB) 180-3 published in October 2008 + * and formerly defined in its predecessors, FIPS PUB 180-1 + * and FIP PUB 180-2. + * + * A combined document showing all algorithms is available at + * http://csrc.nist.gov/publications/fips/ + * fips180-3/fips180-3_final.pdf + * + * The five hashes are defined in these sizes: + * SHA-1 20 byte / 160 bit + * SHA-224 28 byte / 224 bit + * SHA-256 32 byte / 256 bit + * SHA-384 48 byte / 384 bit + * SHA-512 64 byte / 512 bit + * + + + + +Eastlake & Hansen Informational [Page 22] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * Compilation Note: + * These files may be compiled with two options: + * USE_32BIT_ONLY - use 32-bit arithmetic only, for systems + * without 64-bit integers + * + * USE_MODIFIED_MACROS - use alternate form of the SHA_Ch() + * and SHA_Maj() macros that are equivalent + * and potentially faster on many systems + * + */ + +#include <stdint.h> +/* + * If you do not have the ISO standard stdint.h header file, then you + * must typedef the following: + * name meaning + * uint64_t unsigned 64-bit integer + * uint32_t unsigned 32-bit integer + * uint8_t unsigned 8-bit integer (i.e., unsigned char) + * int_least16_t integer of >= 16 bits + * + * See stdint-example.h + */ + +#ifndef _SHA_enum_ +#define _SHA_enum_ +/* + * All SHA functions return one of these values. + */ +enum { + shaSuccess = 0, + shaNull, /* Null pointer parameter */ + shaInputTooLong, /* input data too long */ + shaStateError, /* called Input after FinalBits or Result */ + shaBadParam /* passed a bad parameter */ +}; +#endif /* _SHA_enum_ */ + +/* + * These constants hold size information for each of the SHA + * hashing operations + */ +enum { + SHA1_Message_Block_Size = 64, SHA224_Message_Block_Size = 64, + SHA256_Message_Block_Size = 64, SHA384_Message_Block_Size = 128, + SHA512_Message_Block_Size = 128, + USHA_Max_Message_Block_Size = SHA512_Message_Block_Size, + + + + +Eastlake & Hansen Informational [Page 23] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + SHA1HashSize = 20, SHA224HashSize = 28, SHA256HashSize = 32, + SHA384HashSize = 48, SHA512HashSize = 64, + USHAMaxHashSize = SHA512HashSize, + + SHA1HashSizeBits = 160, SHA224HashSizeBits = 224, + SHA256HashSizeBits = 256, SHA384HashSizeBits = 384, + SHA512HashSizeBits = 512, USHAMaxHashSizeBits = SHA512HashSizeBits +}; + +/* + * These constants are used in the USHA (Unified SHA) functions. + */ +typedef enum SHAversion { + SHA1, SHA224, SHA256, SHA384, SHA512 +} SHAversion; + +/* + * This structure will hold context information for the SHA-1 + * hashing operation. + */ +typedef struct SHA1Context { + uint32_t Intermediate_Hash[SHA1HashSize/4]; /* Message Digest */ + + uint32_t Length_High; /* Message length in bits */ + uint32_t Length_Low; /* Message length in bits */ + + int_least16_t Message_Block_Index; /* Message_Block array index */ + /* 512-bit message blocks */ + uint8_t Message_Block[SHA1_Message_Block_Size]; + + int Computed; /* Is the hash computed? */ + int Corrupted; /* Cumulative corruption code */ +} SHA1Context; + +/* + * This structure will hold context information for the SHA-256 + * hashing operation. + */ +typedef struct SHA256Context { + uint32_t Intermediate_Hash[SHA256HashSize/4]; /* Message Digest */ + + uint32_t Length_High; /* Message length in bits */ + uint32_t Length_Low; /* Message length in bits */ + + int_least16_t Message_Block_Index; /* Message_Block array index */ + /* 512-bit message blocks */ + uint8_t Message_Block[SHA256_Message_Block_Size]; + + + + +Eastlake & Hansen Informational [Page 24] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + int Computed; /* Is the hash computed? */ + int Corrupted; /* Cumulative corruption code */ +} SHA256Context; + +/* + * This structure will hold context information for the SHA-512 + * hashing operation. + */ +typedef struct SHA512Context { +#ifdef USE_32BIT_ONLY + uint32_t Intermediate_Hash[SHA512HashSize/4]; /* Message Digest */ + uint32_t Length[4]; /* Message length in bits */ +#else /* !USE_32BIT_ONLY */ + uint64_t Intermediate_Hash[SHA512HashSize/8]; /* Message Digest */ + uint64_t Length_High, Length_Low; /* Message length in bits */ +#endif /* USE_32BIT_ONLY */ + + int_least16_t Message_Block_Index; /* Message_Block array index */ + /* 1024-bit message blocks */ + uint8_t Message_Block[SHA512_Message_Block_Size]; + + int Computed; /* Is the hash computed?*/ + int Corrupted; /* Cumulative corruption code */ +} SHA512Context; + +/* + * This structure will hold context information for the SHA-224 + * hashing operation. It uses the SHA-256 structure for computation. + */ +typedef struct SHA256Context SHA224Context; + +/* + * This structure will hold context information for the SHA-384 + * hashing operation. It uses the SHA-512 structure for computation. + */ +typedef struct SHA512Context SHA384Context; + +/* + * This structure holds context information for all SHA + * hashing operations. + */ +typedef struct USHAContext { + int whichSha; /* which SHA is being used */ + union { + SHA1Context sha1Context; + SHA224Context sha224Context; SHA256Context sha256Context; + SHA384Context sha384Context; SHA512Context sha512Context; + } ctx; + + + +Eastlake & Hansen Informational [Page 25] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +} USHAContext; + +/* + * This structure will hold context information for the HMAC + * keyed-hashing operation. + */ +typedef struct HMACContext { + int whichSha; /* which SHA is being used */ + int hashSize; /* hash size of SHA being used */ + int blockSize; /* block size of SHA being used */ + USHAContext shaContext; /* SHA context */ + unsigned char k_opad[USHA_Max_Message_Block_Size]; + /* outer padding - key XORd with opad */ + int Computed; /* Is the MAC computed? */ + int Corrupted; /* Cumulative corruption code */ + +} HMACContext; + +/* + * This structure will hold context information for the HKDF + * extract-and-expand Key Derivation Functions. + */ +typedef struct HKDFContext { + int whichSha; /* which SHA is being used */ + HMACContext hmacContext; + int hashSize; /* hash size of SHA being used */ + unsigned char prk[USHAMaxHashSize]; + /* pseudo-random key - output of hkdfInput */ + int Computed; /* Is the key material computed? */ + int Corrupted; /* Cumulative corruption code */ +} HKDFContext; + +/* + * Function Prototypes + */ + +/* SHA-1 */ +extern int SHA1Reset(SHA1Context *); +extern int SHA1Input(SHA1Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA1FinalBits(SHA1Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA1Result(SHA1Context *, + uint8_t Message_Digest[SHA1HashSize]); + + + + + + + +Eastlake & Hansen Informational [Page 26] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +/* SHA-224 */ +extern int SHA224Reset(SHA224Context *); +extern int SHA224Input(SHA224Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA224FinalBits(SHA224Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA224Result(SHA224Context *, + uint8_t Message_Digest[SHA224HashSize]); + +/* SHA-256 */ +extern int SHA256Reset(SHA256Context *); +extern int SHA256Input(SHA256Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA256FinalBits(SHA256Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA256Result(SHA256Context *, + uint8_t Message_Digest[SHA256HashSize]); + +/* SHA-384 */ +extern int SHA384Reset(SHA384Context *); +extern int SHA384Input(SHA384Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA384FinalBits(SHA384Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA384Result(SHA384Context *, + uint8_t Message_Digest[SHA384HashSize]); + +/* SHA-512 */ +extern int SHA512Reset(SHA512Context *); +extern int SHA512Input(SHA512Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA512FinalBits(SHA512Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA512Result(SHA512Context *, + uint8_t Message_Digest[SHA512HashSize]); + +/* Unified SHA functions, chosen by whichSha */ +extern int USHAReset(USHAContext *context, SHAversion whichSha); +extern int USHAInput(USHAContext *context, + const uint8_t *bytes, unsigned int bytecount); +extern int USHAFinalBits(USHAContext *context, + uint8_t bits, unsigned int bit_count); +extern int USHAResult(USHAContext *context, + uint8_t Message_Digest[USHAMaxHashSize]); +extern int USHABlockSize(enum SHAversion whichSha); +extern int USHAHashSize(enum SHAversion whichSha); +extern int USHAHashSizeBits(enum SHAversion whichSha); +extern const char *USHAHashName(enum SHAversion whichSha); + + + +Eastlake & Hansen Informational [Page 27] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +/* + * HMAC Keyed-Hashing for Message Authentication, RFC 2104, + * for all SHAs. + * This interface allows a fixed-length text input to be used. + */ +extern int hmac(SHAversion whichSha, /* which SHA algorithm to use */ + const unsigned char *text, /* pointer to data stream */ + int text_len, /* length of data stream */ + const unsigned char *key, /* pointer to authentication key */ + int key_len, /* length of authentication key */ + uint8_t digest[USHAMaxHashSize]); /* caller digest to fill in */ + +/* + * HMAC Keyed-Hashing for Message Authentication, RFC 2104, + * for all SHAs. + * This interface allows any length of text input to be used. + */ +extern int hmacReset(HMACContext *context, enum SHAversion whichSha, + const unsigned char *key, int key_len); +extern int hmacInput(HMACContext *context, const unsigned char *text, + int text_len); +extern int hmacFinalBits(HMACContext *context, uint8_t bits, + unsigned int bit_count); +extern int hmacResult(HMACContext *context, + uint8_t digest[USHAMaxHashSize]); + +/* + * HKDF HMAC-based Extract-and-Expand Key Derivation Function, + * RFC 5869, for all SHAs. + */ +extern int hkdf(SHAversion whichSha, const unsigned char *salt, + int salt_len, const unsigned char *ikm, int ikm_len, + const unsigned char *info, int info_len, + uint8_t okm[ ], int okm_len); +extern int hkdfExtract(SHAversion whichSha, const unsigned char *salt, + int salt_len, const unsigned char *ikm, + int ikm_len, uint8_t prk[USHAMaxHashSize]); +extern int hkdfExpand(SHAversion whichSha, const uint8_t prk[ ], + int prk_len, const unsigned char *info, + int info_len, uint8_t okm[ ], int okm_len); + +/* + * HKDF HMAC-based Extract-and-Expand Key Derivation Function, + * RFC 5869, for all SHAs. + * This interface allows any length of text input to be used. + */ +extern int hkdfReset(HKDFContext *context, enum SHAversion whichSha, + const unsigned char *salt, int salt_len); + + + +Eastlake & Hansen Informational [Page 28] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +extern int hkdfInput(HKDFContext *context, const unsigned char *ikm, + int ikm_len); +extern int hkdfFinalBits(HKDFContext *context, uint8_t ikm_bits, + unsigned int ikm_bit_count); +extern int hkdfResult(HKDFContext *context, + uint8_t prk[USHAMaxHashSize], + const unsigned char *info, int info_len, + uint8_t okm[USHAMaxHashSize], int okm_len); +#endif /* _SHA_H_ */ + +8.1.2. stdint-example.h + +If your system does not have <stdint.h>, the following should be +adequate as a substitute for compiling the other code in this document. + +/*********************** stdint-example.h **********************/ +/**** Use this file if your system does not have a stdint.h. ***/ +/***************** See RFC 6234 for details. *******************/ +#ifndef STDINT_H +#define STDINT_H + +typedef unsigned long long uint64_t; /* unsigned 64-bit integer */ +typedef unsigned int uint32_t; /* unsigned 32-bit integer */ +typedef unsigned char uint8_t; /* unsigned 8-bit integer */ + /* (i.e., unsigned char) */ +typedef int int_least32_t; /* integer of >= 32 bits */ +typedef short int_least16_t; /* integer of >= 16 bits */ + +#endif /* STDINT_H */ + +8.1.3. sha-private.h + + The sha-private.h header file contains definitions that should only + be needed internally in the other code in this document. These + definitions should not be needed in application code calling the code + provided in this document. + +/************************ sha-private.h ************************/ +/***************** See RFC 6234 for details. *******************/ +#ifndef _SHA_PRIVATE__H +#define _SHA_PRIVATE__H +/* + * These definitions are defined in FIPS 180-3, section 4.1. + * Ch() and Maj() are defined identically in sections 4.1.1, + * 4.1.2, and 4.1.3. + * + * The definitions used in FIPS 180-3 are as follows: + */ + + + +Eastlake & Hansen Informational [Page 29] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +#ifndef USE_MODIFIED_MACROS +#define SHA_Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) +#define SHA_Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) +#else /* USE_MODIFIED_MACROS */ +/* + * The following definitions are equivalent and potentially faster. + */ + +#define SHA_Ch(x, y, z) (((x) & ((y) ^ (z))) ^ (z)) +#define SHA_Maj(x, y, z) (((x) & ((y) | (z))) | ((y) & (z))) + +#endif /* USE_MODIFIED_MACROS */ + +#define SHA_Parity(x, y, z) ((x) ^ (y) ^ (z)) + +#endif /* _SHA_PRIVATE__H */ + +8.2. The SHA Code + + This code is primarily intended as expository reference code and + could be optimized further. For example, the assignment rotations + through the variables a, b, ..., h could be treated as a cycle and + the loop unrolled, rather than doing the explicit copying. + + Note that there are alternative representations of the Ch() and Maj() + functions controlled by an ifdef. + +8.2.1. sha1.c + +/**************************** sha1.c ***************************/ +/***************** See RFC 6234 for details. *******************/ +/* Copyright (c) 2011 IETF Trust and the persons identified as */ +/* authors of the code. All rights reserved. */ +/* See sha.h for terms of use and redistribution. */ + +/* + * Description: + * This file implements the Secure Hash Algorithm SHA-1 + * as defined in the U.S. National Institute of Standards + * and Technology Federal Information Processing Standards + * Publication (FIPS PUB) 180-3 published in October 2008 + * and formerly defined in its predecessors, FIPS PUB 180-1 + * and FIP PUB 180-2. + * + * A combined document showing all algorithms is available at + * http://csrc.nist.gov/publications/fips/ + * fips180-3/fips180-3_final.pdf + * + + + +Eastlake & Hansen Informational [Page 30] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * The SHA-1 algorithm produces a 160-bit message digest for a + * given data stream that can serve as a means of providing a + * "fingerprint" for a message. + * + * Portability Issues: + * SHA-1 is defined in terms of 32-bit "words". This code + * uses <stdint.h> (included via "sha.h") to define 32- and + * 8-bit unsigned integer types. If your C compiler does + * not support 32-bit unsigned integers, this code is not + * appropriate. + * + * Caveats: + * SHA-1 is designed to work with messages less than 2^64 bits + * long. This implementation uses SHA1Input() to hash the bits + * that are a multiple of the size of an 8-bit octet, and then + * optionally uses SHA1FinalBits() to hash the final few bits of + * the input. + */ + +#include "sha.h" +#include "sha-private.h" + +/* + * Define the SHA1 circular left shift macro + */ +#define SHA1_ROTL(bits,word) \ + (((word) << (bits)) | ((word) >> (32-(bits)))) + +/* + * Add "length" to the length. + * Set Corrupted when overflow has occurred. + */ +static uint32_t addTemp; +#define SHA1AddLength(context, length) \ + (addTemp = (context)->Length_Low, \ + (context)->Corrupted = \ + (((context)->Length_Low += (length)) < addTemp) && \ + (++(context)->Length_High == 0) ? shaInputTooLong \ + : (context)->Corrupted ) + +/* Local Function Prototypes */ +static void SHA1ProcessMessageBlock(SHA1Context *context); +static void SHA1Finalize(SHA1Context *context, uint8_t Pad_Byte); +static void SHA1PadMessage(SHA1Context *context, uint8_t Pad_Byte); + + + + + + + +Eastlake & Hansen Informational [Page 31] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +/* + * SHA1Reset + * + * Description: + * This function will initialize the SHA1Context in preparation + * for computing a new SHA1 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * + * Returns: + * sha Error Code. + * + */ +int SHA1Reset(SHA1Context *context) +{ + if (!context) return shaNull; + + context->Length_High = context->Length_Low = 0; + context->Message_Block_Index = 0; + + /* Initial Hash Values: FIPS 180-3 section 5.3.1 */ + context->Intermediate_Hash[0] = 0x67452301; + context->Intermediate_Hash[1] = 0xEFCDAB89; + context->Intermediate_Hash[2] = 0x98BADCFE; + context->Intermediate_Hash[3] = 0x10325476; + context->Intermediate_Hash[4] = 0xC3D2E1F0; + + context->Computed = 0; + context->Corrupted = shaSuccess; + + return shaSuccess; +} + +/* + * SHA1Input + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_array[ ]: [in] + * An array of octets representing the next portion of + * the message. + + + +Eastlake & Hansen Informational [Page 32] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * length: [in] + * The length of the message in message_array. + * + * Returns: + * sha Error Code. + * + */ +int SHA1Input(SHA1Context *context, + const uint8_t *message_array, unsigned length) +{ + if (!context) return shaNull; + if (!length) return shaSuccess; + if (!message_array) return shaNull; + if (context->Computed) return context->Corrupted = shaStateError; + if (context->Corrupted) return context->Corrupted; + + while (length--) { + context->Message_Block[context->Message_Block_Index++] = + *message_array; + + if ((SHA1AddLength(context, 8) == shaSuccess) && + (context->Message_Block_Index == SHA1_Message_Block_Size)) + SHA1ProcessMessageBlock(context); + + message_array++; + } + + return context->Corrupted; +} + +/* + * SHA1FinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + + + +Eastlake & Hansen Informational [Page 33] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + */ +int SHA1FinalBits(SHA1Context *context, uint8_t message_bits, + unsigned int length) +{ + static uint8_t masks[8] = { + /* 0 0b00000000 */ 0x00, /* 1 0b10000000 */ 0x80, + /* 2 0b11000000 */ 0xC0, /* 3 0b11100000 */ 0xE0, + /* 4 0b11110000 */ 0xF0, /* 5 0b11111000 */ 0xF8, + /* 6 0b11111100 */ 0xFC, /* 7 0b11111110 */ 0xFE + }; + + static uint8_t markbit[8] = { + /* 0 0b10000000 */ 0x80, /* 1 0b01000000 */ 0x40, + /* 2 0b00100000 */ 0x20, /* 3 0b00010000 */ 0x10, + /* 4 0b00001000 */ 0x08, /* 5 0b00000100 */ 0x04, + /* 6 0b00000010 */ 0x02, /* 7 0b00000001 */ 0x01 + }; + + if (!context) return shaNull; + if (!length) return shaSuccess; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + if (length >= 8) return context->Corrupted = shaBadParam; + + SHA1AddLength(context, length); + SHA1Finalize(context, + (uint8_t) ((message_bits & masks[length]) | markbit[length])); + + return context->Corrupted; +} + +/* + * SHA1Result + * + * Description: + * This function will return the 160-bit message digest + * into the Message_Digest array provided by the caller. + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 19. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA-1 hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * + + + + +Eastlake & Hansen Informational [Page 34] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * Returns: + * sha Error Code. + * + */ +int SHA1Result(SHA1Context *context, + uint8_t Message_Digest[SHA1HashSize]) +{ + int i; + + if (!context) return shaNull; + if (!Message_Digest) return shaNull; + if (context->Corrupted) return context->Corrupted; + + if (!context->Computed) + SHA1Finalize(context, 0x80); + + for (i = 0; i < SHA1HashSize; ++i) + Message_Digest[i] = (uint8_t) (context->Intermediate_Hash[i>>2] + >> (8 * ( 3 - ( i & 0x03 ) ))); + + return shaSuccess; +} + +/* + * SHA1ProcessMessageBlock + * + * Description: + * This helper function will process the next 512 bits of the + * message stored in the Message_Block array. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * + * Returns: + * Nothing. + * + * Comments: + * Many of the variable names in this code, especially the + * single character names, were used because those were the + * names used in the Secure Hash Standard. + */ +static void SHA1ProcessMessageBlock(SHA1Context *context) +{ + /* Constants defined in FIPS 180-3, section 4.2.1 */ + const uint32_t K[4] = { + 0x5A827999, 0x6ED9EBA1, 0x8F1BBCDC, 0xCA62C1D6 + }; + + + +Eastlake & Hansen Informational [Page 35] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + int t; /* Loop counter */ + uint32_t temp; /* Temporary word value */ + uint32_t W[80]; /* Word sequence */ + uint32_t A, B, C, D, E; /* Word buffers */ + + /* + * Initialize the first 16 words in the array W + */ + for (t = 0; t < 16; t++) { + W[t] = ((uint32_t)context->Message_Block[t * 4]) << 24; + W[t] |= ((uint32_t)context->Message_Block[t * 4 + 1]) << 16; + W[t] |= ((uint32_t)context->Message_Block[t * 4 + 2]) << 8; + W[t] |= ((uint32_t)context->Message_Block[t * 4 + 3]); + } + + for (t = 16; t < 80; t++) + W[t] = SHA1_ROTL(1, W[t-3] ^ W[t-8] ^ W[t-14] ^ W[t-16]); + + A = context->Intermediate_Hash[0]; + B = context->Intermediate_Hash[1]; + C = context->Intermediate_Hash[2]; + D = context->Intermediate_Hash[3]; + E = context->Intermediate_Hash[4]; + + for (t = 0; t < 20; t++) { + temp = SHA1_ROTL(5,A) + SHA_Ch(B, C, D) + E + W[t] + K[0]; + E = D; + D = C; + C = SHA1_ROTL(30,B); + B = A; + A = temp; + } + + for (t = 20; t < 40; t++) { + temp = SHA1_ROTL(5,A) + SHA_Parity(B, C, D) + E + W[t] + K[1]; + E = D; + D = C; + C = SHA1_ROTL(30,B); + B = A; + A = temp; + } + + for (t = 40; t < 60; t++) { + temp = SHA1_ROTL(5,A) + SHA_Maj(B, C, D) + E + W[t] + K[2]; + E = D; + D = C; + C = SHA1_ROTL(30,B); + B = A; + + + +Eastlake & Hansen Informational [Page 36] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + A = temp; + } + + for (t = 60; t < 80; t++) { + temp = SHA1_ROTL(5,A) + SHA_Parity(B, C, D) + E + W[t] + K[3]; + E = D; + D = C; + C = SHA1_ROTL(30,B); + B = A; + A = temp; + } + + context->Intermediate_Hash[0] += A; + context->Intermediate_Hash[1] += B; + context->Intermediate_Hash[2] += C; + context->Intermediate_Hash[3] += D; + context->Intermediate_Hash[4] += E; + context->Message_Block_Index = 0; +} + +/* + * SHA1Finalize + * + * Description: + * This helper function finishes off the digest calculations. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * Pad_Byte: [in] + * The last byte to add to the message block before the 0-padding + * and length. This will contain the last bits of the message + * followed by another single bit. If the message was an + * exact multiple of 8-bits long, Pad_Byte will be 0x80. + * + * Returns: + * sha Error Code. + * + */ +static void SHA1Finalize(SHA1Context *context, uint8_t Pad_Byte) +{ + int i; + SHA1PadMessage(context, Pad_Byte); + /* message may be sensitive, clear it out */ + for (i = 0; i < SHA1_Message_Block_Size; ++i) + context->Message_Block[i] = 0; + context->Length_High = 0; /* and clear length */ + context->Length_Low = 0; + + + +Eastlake & Hansen Informational [Page 37] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + context->Computed = 1; +} + +/* + * SHA1PadMessage + * + * Description: + * According to the standard, the message must be padded to the next + * even multiple of 512 bits. The first padding bit must be a '1'. + * The last 64 bits represent the length of the original message. + * All bits in between should be 0. This helper function will pad + * the message according to those rules by filling the Message_Block + * array accordingly. When it returns, it can be assumed that the + * message digest has been computed. + * + * Parameters: + * context: [in/out] + * The context to pad. + * Pad_Byte: [in] + * The last byte to add to the message block before the 0-padding + * and length. This will contain the last bits of the message + * followed by another single bit. If the message was an + * exact multiple of 8-bits long, Pad_Byte will be 0x80. + * + * Returns: + * Nothing. + */ +static void SHA1PadMessage(SHA1Context *context, uint8_t Pad_Byte) +{ + /* + * Check to see if the current message block is too small to hold + * the initial padding bits and length. If so, we will pad the + * block, process it, and then continue padding into a second + * block. + */ + if (context->Message_Block_Index >= (SHA1_Message_Block_Size - 8)) { + context->Message_Block[context->Message_Block_Index++] = Pad_Byte; + while (context->Message_Block_Index < SHA1_Message_Block_Size) + context->Message_Block[context->Message_Block_Index++] = 0; + + SHA1ProcessMessageBlock(context); + } else + context->Message_Block[context->Message_Block_Index++] = Pad_Byte; + + while (context->Message_Block_Index < (SHA1_Message_Block_Size - 8)) + context->Message_Block[context->Message_Block_Index++] = 0; + + + + + +Eastlake & Hansen Informational [Page 38] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + /* + * Store the message length as the last 8 octets + */ + context->Message_Block[56] = (uint8_t) (context->Length_High >> 24); + context->Message_Block[57] = (uint8_t) (context->Length_High >> 16); + context->Message_Block[58] = (uint8_t) (context->Length_High >> 8); + context->Message_Block[59] = (uint8_t) (context->Length_High); + context->Message_Block[60] = (uint8_t) (context->Length_Low >> 24); + context->Message_Block[61] = (uint8_t) (context->Length_Low >> 16); + context->Message_Block[62] = (uint8_t) (context->Length_Low >> 8); + context->Message_Block[63] = (uint8_t) (context->Length_Low); + + SHA1ProcessMessageBlock(context); +} + +8.2.2. sha224-256.c + +/************************* sha224-256.c ************************/ +/***************** See RFC 6234 for details. *******************/ +/* Copyright (c) 2011 IETF Trust and the persons identified as */ +/* authors of the code. All rights reserved. */ +/* See sha.h for terms of use and redistribution. */ + +/* + * Description: + * This file implements the Secure Hash Algorithms SHA-224 and + * SHA-256 as defined in the U.S. National Institute of Standards + * and Technology Federal Information Processing Standards + * Publication (FIPS PUB) 180-3 published in October 2008 + * and formerly defined in its predecessors, FIPS PUB 180-1 + * and FIP PUB 180-2. + * + * A combined document showing all algorithms is available at + * http://csrc.nist.gov/publications/fips/ + * fips180-3/fips180-3_final.pdf + * + * The SHA-224 and SHA-256 algorithms produce 224-bit and 256-bit + * message digests for a given data stream. It should take about + * 2**n steps to find a message with the same digest as a given + * message and 2**(n/2) to find any two messages with the same + * digest, when n is the digest size in bits. Therefore, this + * algorithm can serve as a means of providing a + * "fingerprint" for a message. + * + * Portability Issues: + * SHA-224 and SHA-256 are defined in terms of 32-bit "words". + * This code uses <stdint.h> (included via "sha.h") to define 32- + * and 8-bit unsigned integer types. If your C compiler does not + + + +Eastlake & Hansen Informational [Page 39] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * support 32-bit unsigned integers, this code is not + * appropriate. + * + * Caveats: + * SHA-224 and SHA-256 are designed to work with messages less + * than 2^64 bits long. This implementation uses SHA224/256Input() + * to hash the bits that are a multiple of the size of an 8-bit + * octet, and then optionally uses SHA224/256FinalBits() + * to hash the final few bits of the input. + */ + +#include "sha.h" +#include "sha-private.h" + +/* Define the SHA shift, rotate left, and rotate right macros */ +#define SHA256_SHR(bits,word) ((word) >> (bits)) +#define SHA256_ROTL(bits,word) \ + (((word) << (bits)) | ((word) >> (32-(bits)))) +#define SHA256_ROTR(bits,word) \ + (((word) >> (bits)) | ((word) << (32-(bits)))) + +/* Define the SHA SIGMA and sigma macros */ +#define SHA256_SIGMA0(word) \ + (SHA256_ROTR( 2,word) ^ SHA256_ROTR(13,word) ^ SHA256_ROTR(22,word)) +#define SHA256_SIGMA1(word) \ + (SHA256_ROTR( 6,word) ^ SHA256_ROTR(11,word) ^ SHA256_ROTR(25,word)) +#define SHA256_sigma0(word) \ + (SHA256_ROTR( 7,word) ^ SHA256_ROTR(18,word) ^ SHA256_SHR( 3,word)) +#define SHA256_sigma1(word) \ + (SHA256_ROTR(17,word) ^ SHA256_ROTR(19,word) ^ SHA256_SHR(10,word)) + +/* + * Add "length" to the length. + * Set Corrupted when overflow has occurred. + */ +static uint32_t addTemp; +#define SHA224_256AddLength(context, length) \ + (addTemp = (context)->Length_Low, (context)->Corrupted = \ + (((context)->Length_Low += (length)) < addTemp) && \ + (++(context)->Length_High == 0) ? shaInputTooLong : \ + (context)->Corrupted ) + +/* Local Function Prototypes */ +static int SHA224_256Reset(SHA256Context *context, uint32_t *H0); +static void SHA224_256ProcessMessageBlock(SHA256Context *context); +static void SHA224_256Finalize(SHA256Context *context, + uint8_t Pad_Byte); +static void SHA224_256PadMessage(SHA256Context *context, + + + +Eastlake & Hansen Informational [Page 40] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + uint8_t Pad_Byte); +static int SHA224_256ResultN(SHA256Context *context, + uint8_t Message_Digest[ ], int HashSize); + +/* Initial Hash Values: FIPS 180-3 section 5.3.2 */ +static uint32_t SHA224_H0[SHA256HashSize/4] = { + 0xC1059ED8, 0x367CD507, 0x3070DD17, 0xF70E5939, + 0xFFC00B31, 0x68581511, 0x64F98FA7, 0xBEFA4FA4 +}; + +/* Initial Hash Values: FIPS 180-3 section 5.3.3 */ +static uint32_t SHA256_H0[SHA256HashSize/4] = { + 0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A, + 0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19 +}; + +/* + * SHA224Reset + * + * Description: + * This function will initialize the SHA224Context in preparation + * for computing a new SHA224 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * + * Returns: + * sha Error Code. + */ +int SHA224Reset(SHA224Context *context) +{ + return SHA224_256Reset(context, SHA224_H0); +} + +/* + * SHA224Input + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_array[ ]: [in] + * An array of octets representing the next portion of + * the message. + + + +Eastlake & Hansen Informational [Page 41] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * length: [in] + * The length of the message in message_array. + * + * Returns: + * sha Error Code. + * + */ +int SHA224Input(SHA224Context *context, const uint8_t *message_array, + unsigned int length) +{ + return SHA256Input(context, message_array, length); +} + +/* + * SHA224FinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + */ +int SHA224FinalBits(SHA224Context *context, + uint8_t message_bits, unsigned int length) +{ + return SHA256FinalBits(context, message_bits, length); +} + +/* + * SHA224Result + * + * Description: + * This function will return the 224-bit message digest + * into the Message_Digest array provided by the caller. + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 27. + * + + + +Eastlake & Hansen Informational [Page 42] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * + * Returns: + * sha Error Code. + */ +int SHA224Result(SHA224Context *context, + uint8_t Message_Digest[SHA224HashSize]) +{ + return SHA224_256ResultN(context, Message_Digest, SHA224HashSize); +} + +/* + * SHA256Reset + * + * Description: + * This function will initialize the SHA256Context in preparation + * for computing a new SHA256 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * + * Returns: + * sha Error Code. + */ +int SHA256Reset(SHA256Context *context) +{ + return SHA224_256Reset(context, SHA256_H0); +} + +/* + * SHA256Input + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_array[ ]: [in] + * An array of octets representing the next portion of + * the message. + + + + +Eastlake & Hansen Informational [Page 43] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * length: [in] + * The length of the message in message_array. + * + * Returns: + * sha Error Code. + */ +int SHA256Input(SHA256Context *context, const uint8_t *message_array, + unsigned int length) +{ + if (!context) return shaNull; + if (!length) return shaSuccess; + if (!message_array) return shaNull; + if (context->Computed) return context->Corrupted = shaStateError; + if (context->Corrupted) return context->Corrupted; + + while (length--) { + context->Message_Block[context->Message_Block_Index++] = + *message_array; + + if ((SHA224_256AddLength(context, 8) == shaSuccess) && + (context->Message_Block_Index == SHA256_Message_Block_Size)) + SHA224_256ProcessMessageBlock(context); + + message_array++; + } + + return context->Corrupted; + +} + +/* + * SHA256FinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + + + +Eastlake & Hansen Informational [Page 44] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + */ +int SHA256FinalBits(SHA256Context *context, + uint8_t message_bits, unsigned int length) +{ + static uint8_t masks[8] = { + /* 0 0b00000000 */ 0x00, /* 1 0b10000000 */ 0x80, + /* 2 0b11000000 */ 0xC0, /* 3 0b11100000 */ 0xE0, + /* 4 0b11110000 */ 0xF0, /* 5 0b11111000 */ 0xF8, + /* 6 0b11111100 */ 0xFC, /* 7 0b11111110 */ 0xFE + }; + static uint8_t markbit[8] = { + /* 0 0b10000000 */ 0x80, /* 1 0b01000000 */ 0x40, + /* 2 0b00100000 */ 0x20, /* 3 0b00010000 */ 0x10, + /* 4 0b00001000 */ 0x08, /* 5 0b00000100 */ 0x04, + /* 6 0b00000010 */ 0x02, /* 7 0b00000001 */ 0x01 + }; + + if (!context) return shaNull; + if (!length) return shaSuccess; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + if (length >= 8) return context->Corrupted = shaBadParam; + + SHA224_256AddLength(context, length); + SHA224_256Finalize(context, (uint8_t) + ((message_bits & masks[length]) | markbit[length])); + + return context->Corrupted; +} + +/* + * SHA256Result + * + * Description: + * This function will return the 256-bit message digest + * into the Message_Digest array provided by the caller. + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 31. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * + * Returns: + * sha Error Code. + + + +Eastlake & Hansen Informational [Page 45] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + */ +int SHA256Result(SHA256Context *context, + uint8_t Message_Digest[SHA256HashSize]) +{ + return SHA224_256ResultN(context, Message_Digest, SHA256HashSize); +} + +/* + * SHA224_256Reset + * + * Description: + * This helper function will initialize the SHA256Context in + * preparation for computing a new SHA-224 or SHA-256 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * H0[ ]: [in] + * The initial hash value array to use. + * + * Returns: + * sha Error Code. + */ +static int SHA224_256Reset(SHA256Context *context, uint32_t *H0) +{ + if (!context) return shaNull; + + context->Length_High = context->Length_Low = 0; + context->Message_Block_Index = 0; + + context->Intermediate_Hash[0] = H0[0]; + context->Intermediate_Hash[1] = H0[1]; + context->Intermediate_Hash[2] = H0[2]; + context->Intermediate_Hash[3] = H0[3]; + context->Intermediate_Hash[4] = H0[4]; + context->Intermediate_Hash[5] = H0[5]; + context->Intermediate_Hash[6] = H0[6]; + context->Intermediate_Hash[7] = H0[7]; + + context->Computed = 0; + context->Corrupted = shaSuccess; + + return shaSuccess; +} + +/* + * SHA224_256ProcessMessageBlock + * + + + +Eastlake & Hansen Informational [Page 46] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * Description: + * This helper function will process the next 512 bits of the + * message stored in the Message_Block array. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * + * Returns: + * Nothing. + * + * Comments: + * Many of the variable names in this code, especially the + * single character names, were used because those were the + * names used in the Secure Hash Standard. + */ +static void SHA224_256ProcessMessageBlock(SHA256Context *context) +{ + /* Constants defined in FIPS 180-3, section 4.2.2 */ + static const uint32_t K[64] = { + 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, 0x3956c25b, + 0x59f111f1, 0x923f82a4, 0xab1c5ed5, 0xd807aa98, 0x12835b01, + 0x243185be, 0x550c7dc3, 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, + 0xc19bf174, 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, + 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da, 0x983e5152, + 0xa831c66d, 0xb00327c8, 0xbf597fc7, 0xc6e00bf3, 0xd5a79147, + 0x06ca6351, 0x14292967, 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, + 0x53380d13, 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85, + 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, 0xd192e819, + 0xd6990624, 0xf40e3585, 0x106aa070, 0x19a4c116, 0x1e376c08, + 0x2748774c, 0x34b0bcb5, 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, + 0x682e6ff3, 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, + 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 + }; + int t, t4; /* Loop counter */ + uint32_t temp1, temp2; /* Temporary word value */ + uint32_t W[64]; /* Word sequence */ + uint32_t A, B, C, D, E, F, G, H; /* Word buffers */ + + /* + * Initialize the first 16 words in the array W + */ + for (t = t4 = 0; t < 16; t++, t4 += 4) + W[t] = (((uint32_t)context->Message_Block[t4]) << 24) | + (((uint32_t)context->Message_Block[t4 + 1]) << 16) | + (((uint32_t)context->Message_Block[t4 + 2]) << 8) | + (((uint32_t)context->Message_Block[t4 + 3])); + + + + +Eastlake & Hansen Informational [Page 47] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + for (t = 16; t < 64; t++) + W[t] = SHA256_sigma1(W[t-2]) + W[t-7] + + SHA256_sigma0(W[t-15]) + W[t-16]; + + A = context->Intermediate_Hash[0]; + B = context->Intermediate_Hash[1]; + C = context->Intermediate_Hash[2]; + D = context->Intermediate_Hash[3]; + E = context->Intermediate_Hash[4]; + F = context->Intermediate_Hash[5]; + G = context->Intermediate_Hash[6]; + H = context->Intermediate_Hash[7]; + + for (t = 0; t < 64; t++) { + temp1 = H + SHA256_SIGMA1(E) + SHA_Ch(E,F,G) + K[t] + W[t]; + temp2 = SHA256_SIGMA0(A) + SHA_Maj(A,B,C); + H = G; + G = F; + F = E; + E = D + temp1; + D = C; + C = B; + B = A; + A = temp1 + temp2; + } + + context->Intermediate_Hash[0] += A; + context->Intermediate_Hash[1] += B; + context->Intermediate_Hash[2] += C; + context->Intermediate_Hash[3] += D; + context->Intermediate_Hash[4] += E; + context->Intermediate_Hash[5] += F; + context->Intermediate_Hash[6] += G; + context->Intermediate_Hash[7] += H; + + context->Message_Block_Index = 0; +} + +/* + * SHA224_256Finalize + * + * Description: + * This helper function finishes off the digest calculations. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * Pad_Byte: [in] + + + +Eastlake & Hansen Informational [Page 48] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * The last byte to add to the message block before the 0-padding + * and length. This will contain the last bits of the message + * followed by another single bit. If the message was an + * exact multiple of 8-bits long, Pad_Byte will be 0x80. + * + * Returns: + * sha Error Code. + */ +static void SHA224_256Finalize(SHA256Context *context, + uint8_t Pad_Byte) +{ + int i; + SHA224_256PadMessage(context, Pad_Byte); + /* message may be sensitive, so clear it out */ + for (i = 0; i < SHA256_Message_Block_Size; ++i) + context->Message_Block[i] = 0; + context->Length_High = 0; /* and clear length */ + context->Length_Low = 0; + context->Computed = 1; +} + +/* + * SHA224_256PadMessage + * + * Description: + * According to the standard, the message must be padded to the next + * even multiple of 512 bits. The first padding bit must be a '1'. + * The last 64 bits represent the length of the original message. + * All bits in between should be 0. This helper function will pad + * the message according to those rules by filling the + * Message_Block array accordingly. When it returns, it can be + * assumed that the message digest has been computed. + * + * Parameters: + * context: [in/out] + * The context to pad. + * Pad_Byte: [in] + * The last byte to add to the message block before the 0-padding + * and length. This will contain the last bits of the message + * followed by another single bit. If the message was an + * exact multiple of 8-bits long, Pad_Byte will be 0x80. + * + * Returns: + * Nothing. + */ +static void SHA224_256PadMessage(SHA256Context *context, + uint8_t Pad_Byte) +{ + + + +Eastlake & Hansen Informational [Page 49] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + /* + * Check to see if the current message block is too small to hold + * the initial padding bits and length. If so, we will pad the + * block, process it, and then continue padding into a second + * block. + */ + if (context->Message_Block_Index >= (SHA256_Message_Block_Size-8)) { + context->Message_Block[context->Message_Block_Index++] = Pad_Byte; + while (context->Message_Block_Index < SHA256_Message_Block_Size) + context->Message_Block[context->Message_Block_Index++] = 0; + SHA224_256ProcessMessageBlock(context); + } else + context->Message_Block[context->Message_Block_Index++] = Pad_Byte; + + while (context->Message_Block_Index < (SHA256_Message_Block_Size-8)) + context->Message_Block[context->Message_Block_Index++] = 0; + + /* + * Store the message length as the last 8 octets + */ + context->Message_Block[56] = (uint8_t)(context->Length_High >> 24); + context->Message_Block[57] = (uint8_t)(context->Length_High >> 16); + context->Message_Block[58] = (uint8_t)(context->Length_High >> 8); + context->Message_Block[59] = (uint8_t)(context->Length_High); + context->Message_Block[60] = (uint8_t)(context->Length_Low >> 24); + context->Message_Block[61] = (uint8_t)(context->Length_Low >> 16); + context->Message_Block[62] = (uint8_t)(context->Length_Low >> 8); + context->Message_Block[63] = (uint8_t)(context->Length_Low); + + SHA224_256ProcessMessageBlock(context); +} + +/* + * SHA224_256ResultN + * + * Description: + * This helper function will return the 224-bit or 256-bit message + * digest into the Message_Digest array provided by the caller. + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 27/31. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * HashSize: [in] + + + +Eastlake & Hansen Informational [Page 50] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * The size of the hash, either 28 or 32. + * + * Returns: + * sha Error Code. + */ +static int SHA224_256ResultN(SHA256Context *context, + uint8_t Message_Digest[ ], int HashSize) +{ + int i; + + if (!context) return shaNull; + if (!Message_Digest) return shaNull; + if (context->Corrupted) return context->Corrupted; + + if (!context->Computed) + SHA224_256Finalize(context, 0x80); + + for (i = 0; i < HashSize; ++i) + Message_Digest[i] = (uint8_t) + (context->Intermediate_Hash[i>>2] >> 8 * ( 3 - ( i & 0x03 ) )); + + return shaSuccess; +} + +8.2.3. sha384-512.c + +/************************* sha384-512.c ************************/ +/***************** See RFC 6234 for details. *******************/ +/* Copyright (c) 2011 IETF Trust and the persons identified as */ +/* authors of the code. All rights reserved. */ +/* See sha.h for terms of use and redistribution. */ + +/* + * Description: + * This file implements the Secure Hash Algorithms SHA-384 and + * SHA-512 as defined in the U.S. National Institute of Standards + * and Technology Federal Information Processing Standards + * Publication (FIPS PUB) 180-3 published in October 2008 + * and formerly defined in its predecessors, FIPS PUB 180-1 + * and FIP PUB 180-2. + * + * A combined document showing all algorithms is available at + * http://csrc.nist.gov/publications/fips/ + * fips180-3/fips180-3_final.pdf + * + * The SHA-384 and SHA-512 algorithms produce 384-bit and 512-bit + * message digests for a given data stream. It should take about + * 2**n steps to find a message with the same digest as a given + + + +Eastlake & Hansen Informational [Page 51] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * message and 2**(n/2) to find any two messages with the same + * digest, when n is the digest size in bits. Therefore, this + * algorithm can serve as a means of providing a + * "fingerprint" for a message. + * + * Portability Issues: + * SHA-384 and SHA-512 are defined in terms of 64-bit "words", + * but if USE_32BIT_ONLY is #defined, this code is implemented in + * terms of 32-bit "words". This code uses <stdint.h> (included + * via "sha.h") to define the 64-, 32- and 8-bit unsigned integer + * types. If your C compiler does not support 64-bit unsigned + * integers and you do not #define USE_32BIT_ONLY, this code is + * not appropriate. + * + * Caveats: + * SHA-384 and SHA-512 are designed to work with messages less + * than 2^128 bits long. This implementation uses SHA384/512Input() + * to hash the bits that are a multiple of the size of an 8-bit + * octet, and then optionally uses SHA384/256FinalBits() + * to hash the final few bits of the input. + * + */ + +#include "sha.h" + +#ifdef USE_32BIT_ONLY +/* + * Define 64-bit arithmetic in terms of 32-bit arithmetic. + * Each 64-bit number is represented in a 2-word array. + * All macros are defined such that the result is the last parameter. + */ + +/* + * Define shift, rotate left, and rotate right functions + */ +#define SHA512_SHR(bits, word, ret) ( \ + /* (((uint64_t)((word))) >> (bits)) */ \ + (ret)[0] = (((bits) < 32) && ((bits) >= 0)) ? \ + ((word)[0] >> (bits)) : 0, \ + (ret)[1] = ((bits) > 32) ? ((word)[0] >> ((bits) - 32)) : \ + ((bits) == 32) ? (word)[0] : \ + ((bits) >= 0) ? \ + (((word)[0] << (32 - (bits))) | \ + ((word)[1] >> (bits))) : 0 ) + +#define SHA512_SHL(bits, word, ret) ( \ + /* (((uint64_t)(word)) << (bits)) */ \ + (ret)[0] = ((bits) > 32) ? ((word)[1] << ((bits) - 32)) : \ + + + +Eastlake & Hansen Informational [Page 52] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + ((bits) == 32) ? (word)[1] : \ + ((bits) >= 0) ? \ + (((word)[0] << (bits)) | \ + ((word)[1] >> (32 - (bits)))) : \ + 0, \ + (ret)[1] = (((bits) < 32) && ((bits) >= 0)) ? \ + ((word)[1] << (bits)) : 0 ) + +/* + * Define 64-bit OR + */ +#define SHA512_OR(word1, word2, ret) ( \ + (ret)[0] = (word1)[0] | (word2)[0], \ + (ret)[1] = (word1)[1] | (word2)[1] ) + +/* + * Define 64-bit XOR + */ +#define SHA512_XOR(word1, word2, ret) ( \ + (ret)[0] = (word1)[0] ^ (word2)[0], \ + (ret)[1] = (word1)[1] ^ (word2)[1] ) + +/* + * Define 64-bit AND + */ +#define SHA512_AND(word1, word2, ret) ( \ + (ret)[0] = (word1)[0] & (word2)[0], \ + (ret)[1] = (word1)[1] & (word2)[1] ) + +/* + * Define 64-bit TILDA + */ +#define SHA512_TILDA(word, ret) \ + ( (ret)[0] = ~(word)[0], (ret)[1] = ~(word)[1] ) + +/* + * Define 64-bit ADD + */ +#define SHA512_ADD(word1, word2, ret) ( \ + (ret)[1] = (word1)[1], (ret)[1] += (word2)[1], \ + (ret)[0] = (word1)[0] + (word2)[0] + ((ret)[1] < (word1)[1]) ) + +/* + * Add the 4word value in word2 to word1. + */ +static uint32_t ADDTO4_temp, ADDTO4_temp2; +#define SHA512_ADDTO4(word1, word2) ( \ + ADDTO4_temp = (word1)[3], \ + + + +Eastlake & Hansen Informational [Page 53] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + (word1)[3] += (word2)[3], \ + ADDTO4_temp2 = (word1)[2], \ + (word1)[2] += (word2)[2] + ((word1)[3] < ADDTO4_temp), \ + ADDTO4_temp = (word1)[1], \ + (word1)[1] += (word2)[1] + ((word1)[2] < ADDTO4_temp2), \ + (word1)[0] += (word2)[0] + ((word1)[1] < ADDTO4_temp) ) + +/* + * Add the 2word value in word2 to word1. + */ +static uint32_t ADDTO2_temp; +#define SHA512_ADDTO2(word1, word2) ( \ + ADDTO2_temp = (word1)[1], \ + (word1)[1] += (word2)[1], \ + (word1)[0] += (word2)[0] + ((word1)[1] < ADDTO2_temp) ) + +/* + * SHA rotate ((word >> bits) | (word << (64-bits))) + */ +static uint32_t ROTR_temp1[2], ROTR_temp2[2]; +#define SHA512_ROTR(bits, word, ret) ( \ + SHA512_SHR((bits), (word), ROTR_temp1), \ + SHA512_SHL(64-(bits), (word), ROTR_temp2), \ + SHA512_OR(ROTR_temp1, ROTR_temp2, (ret)) ) + +/* + * Define the SHA SIGMA and sigma macros + * + * SHA512_ROTR(28,word) ^ SHA512_ROTR(34,word) ^ SHA512_ROTR(39,word) + */ +static uint32_t SIGMA0_temp1[2], SIGMA0_temp2[2], + SIGMA0_temp3[2], SIGMA0_temp4[2]; +#define SHA512_SIGMA0(word, ret) ( \ + SHA512_ROTR(28, (word), SIGMA0_temp1), \ + SHA512_ROTR(34, (word), SIGMA0_temp2), \ + SHA512_ROTR(39, (word), SIGMA0_temp3), \ + SHA512_XOR(SIGMA0_temp2, SIGMA0_temp3, SIGMA0_temp4), \ + SHA512_XOR(SIGMA0_temp1, SIGMA0_temp4, (ret)) ) + +/* + * SHA512_ROTR(14,word) ^ SHA512_ROTR(18,word) ^ SHA512_ROTR(41,word) + */ +static uint32_t SIGMA1_temp1[2], SIGMA1_temp2[2], + SIGMA1_temp3[2], SIGMA1_temp4[2]; +#define SHA512_SIGMA1(word, ret) ( \ + SHA512_ROTR(14, (word), SIGMA1_temp1), \ + SHA512_ROTR(18, (word), SIGMA1_temp2), \ + SHA512_ROTR(41, (word), SIGMA1_temp3), \ + + + +Eastlake & Hansen Informational [Page 54] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + SHA512_XOR(SIGMA1_temp2, SIGMA1_temp3, SIGMA1_temp4), \ + SHA512_XOR(SIGMA1_temp1, SIGMA1_temp4, (ret)) ) + +/* + * (SHA512_ROTR( 1,word) ^ SHA512_ROTR( 8,word) ^ SHA512_SHR( 7,word)) + */ +static uint32_t sigma0_temp1[2], sigma0_temp2[2], + sigma0_temp3[2], sigma0_temp4[2]; +#define SHA512_sigma0(word, ret) ( \ + SHA512_ROTR( 1, (word), sigma0_temp1), \ + SHA512_ROTR( 8, (word), sigma0_temp2), \ + SHA512_SHR( 7, (word), sigma0_temp3), \ + SHA512_XOR(sigma0_temp2, sigma0_temp3, sigma0_temp4), \ + SHA512_XOR(sigma0_temp1, sigma0_temp4, (ret)) ) + +/* + * (SHA512_ROTR(19,word) ^ SHA512_ROTR(61,word) ^ SHA512_SHR( 6,word)) + */ +static uint32_t sigma1_temp1[2], sigma1_temp2[2], + sigma1_temp3[2], sigma1_temp4[2]; +#define SHA512_sigma1(word, ret) ( \ + SHA512_ROTR(19, (word), sigma1_temp1), \ + SHA512_ROTR(61, (word), sigma1_temp2), \ + SHA512_SHR( 6, (word), sigma1_temp3), \ + SHA512_XOR(sigma1_temp2, sigma1_temp3, sigma1_temp4), \ + SHA512_XOR(sigma1_temp1, sigma1_temp4, (ret)) ) + +#ifndef USE_MODIFIED_MACROS +/* + * These definitions are the ones used in FIPS 180-3, section 4.1.3 + * Ch(x,y,z) ((x & y) ^ (~x & z)) + */ +static uint32_t Ch_temp1[2], Ch_temp2[2], Ch_temp3[2]; +#define SHA_Ch(x, y, z, ret) ( \ + SHA512_AND(x, y, Ch_temp1), \ + SHA512_TILDA(x, Ch_temp2), \ + SHA512_AND(Ch_temp2, z, Ch_temp3), \ + SHA512_XOR(Ch_temp1, Ch_temp3, (ret)) ) + +/* + * Maj(x,y,z) (((x)&(y)) ^ ((x)&(z)) ^ ((y)&(z))) + */ +static uint32_t Maj_temp1[2], Maj_temp2[2], + Maj_temp3[2], Maj_temp4[2]; +#define SHA_Maj(x, y, z, ret) ( \ + SHA512_AND(x, y, Maj_temp1), \ + SHA512_AND(x, z, Maj_temp2), \ + SHA512_AND(y, z, Maj_temp3), \ + + + +Eastlake & Hansen Informational [Page 55] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + SHA512_XOR(Maj_temp2, Maj_temp3, Maj_temp4), \ + SHA512_XOR(Maj_temp1, Maj_temp4, (ret)) ) +#else /* !USE_MODIFIED_MACROS */ +/* + * These definitions are potentially faster equivalents for the ones + * used in FIPS 180-3, section 4.1.3. + * ((x & y) ^ (~x & z)) becomes + * ((x & (y ^ z)) ^ z) + */ +#define SHA_Ch(x, y, z, ret) ( \ + (ret)[0] = (((x)[0] & ((y)[0] ^ (z)[0])) ^ (z)[0]), \ + (ret)[1] = (((x)[1] & ((y)[1] ^ (z)[1])) ^ (z)[1]) ) + +/* + * ((x & y) ^ (x & z) ^ (y & z)) becomes + * ((x & (y | z)) | (y & z)) + */ +#define SHA_Maj(x, y, z, ret) ( \ + ret[0] = (((x)[0] & ((y)[0] | (z)[0])) | ((y)[0] & (z)[0])), \ + ret[1] = (((x)[1] & ((y)[1] | (z)[1])) | ((y)[1] & (z)[1])) ) +#endif /* USE_MODIFIED_MACROS */ + +/* + * Add "length" to the length. + * Set Corrupted when overflow has occurred. + */ +static uint32_t addTemp[4] = { 0, 0, 0, 0 }; +#define SHA384_512AddLength(context, length) ( \ + addTemp[3] = (length), SHA512_ADDTO4((context)->Length, addTemp), \ + (context)->Corrupted = (((context)->Length[3] < (length)) && \ + ((context)->Length[2] == 0) && ((context)->Length[1] == 0) && \ + ((context)->Length[0] == 0)) ? shaInputTooLong : \ + (context)->Corrupted ) + +/* Local Function Prototypes */ +static int SHA384_512Reset(SHA512Context *context, + uint32_t H0[SHA512HashSize/4]); +static void SHA384_512ProcessMessageBlock(SHA512Context *context); +static void SHA384_512Finalize(SHA512Context *context, + uint8_t Pad_Byte); +static void SHA384_512PadMessage(SHA512Context *context, + uint8_t Pad_Byte); +static int SHA384_512ResultN( SHA512Context *context, + uint8_t Message_Digest[ ], int HashSize); + +/* Initial Hash Values: FIPS 180-3 sections 5.3.4 and 5.3.5 */ +static uint32_t SHA384_H0[SHA512HashSize/4] = { + 0xCBBB9D5D, 0xC1059ED8, 0x629A292A, 0x367CD507, 0x9159015A, + + + +Eastlake & Hansen Informational [Page 56] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + 0x3070DD17, 0x152FECD8, 0xF70E5939, 0x67332667, 0xFFC00B31, + 0x8EB44A87, 0x68581511, 0xDB0C2E0D, 0x64F98FA7, 0x47B5481D, + 0xBEFA4FA4 +}; +static uint32_t SHA512_H0[SHA512HashSize/4] = { + 0x6A09E667, 0xF3BCC908, 0xBB67AE85, 0x84CAA73B, 0x3C6EF372, + 0xFE94F82B, 0xA54FF53A, 0x5F1D36F1, 0x510E527F, 0xADE682D1, + 0x9B05688C, 0x2B3E6C1F, 0x1F83D9AB, 0xFB41BD6B, 0x5BE0CD19, + 0x137E2179 +}; + +#else /* !USE_32BIT_ONLY */ + +#include "sha-private.h" + +/* Define the SHA shift, rotate left and rotate right macros */ +#define SHA512_SHR(bits,word) (((uint64_t)(word)) >> (bits)) +#define SHA512_ROTR(bits,word) ((((uint64_t)(word)) >> (bits)) | \ + (((uint64_t)(word)) << (64-(bits)))) + +/* + * Define the SHA SIGMA and sigma macros + * + * SHA512_ROTR(28,word) ^ SHA512_ROTR(34,word) ^ SHA512_ROTR(39,word) + */ +#define SHA512_SIGMA0(word) \ + (SHA512_ROTR(28,word) ^ SHA512_ROTR(34,word) ^ SHA512_ROTR(39,word)) +#define SHA512_SIGMA1(word) \ + (SHA512_ROTR(14,word) ^ SHA512_ROTR(18,word) ^ SHA512_ROTR(41,word)) +#define SHA512_sigma0(word) \ + (SHA512_ROTR( 1,word) ^ SHA512_ROTR( 8,word) ^ SHA512_SHR( 7,word)) +#define SHA512_sigma1(word) \ + (SHA512_ROTR(19,word) ^ SHA512_ROTR(61,word) ^ SHA512_SHR( 6,word)) + +/* + * Add "length" to the length. + * Set Corrupted when overflow has occurred. + */ +static uint64_t addTemp; +#define SHA384_512AddLength(context, length) \ + (addTemp = context->Length_Low, context->Corrupted = \ + ((context->Length_Low += length) < addTemp) && \ + (++context->Length_High == 0) ? shaInputTooLong : \ + (context)->Corrupted) + +/* Local Function Prototypes */ +static int SHA384_512Reset(SHA512Context *context, + uint64_t H0[SHA512HashSize/8]); + + + +Eastlake & Hansen Informational [Page 57] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +static void SHA384_512ProcessMessageBlock(SHA512Context *context); +static void SHA384_512Finalize(SHA512Context *context, + uint8_t Pad_Byte); +static void SHA384_512PadMessage(SHA512Context *context, + uint8_t Pad_Byte); +static int SHA384_512ResultN(SHA512Context *context, + uint8_t Message_Digest[ ], int HashSize); + +/* Initial Hash Values: FIPS 180-3 sections 5.3.4 and 5.3.5 */ +static uint64_t SHA384_H0[ ] = { + 0xCBBB9D5DC1059ED8ll, 0x629A292A367CD507ll, 0x9159015A3070DD17ll, + 0x152FECD8F70E5939ll, 0x67332667FFC00B31ll, 0x8EB44A8768581511ll, + 0xDB0C2E0D64F98FA7ll, 0x47B5481DBEFA4FA4ll +}; +static uint64_t SHA512_H0[ ] = { + 0x6A09E667F3BCC908ll, 0xBB67AE8584CAA73Bll, 0x3C6EF372FE94F82Bll, + 0xA54FF53A5F1D36F1ll, 0x510E527FADE682D1ll, 0x9B05688C2B3E6C1Fll, + 0x1F83D9ABFB41BD6Bll, 0x5BE0CD19137E2179ll +}; + +#endif /* USE_32BIT_ONLY */ + +/* + * SHA384Reset + * + * Description: + * This function will initialize the SHA384Context in preparation + * for computing a new SHA384 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * + * Returns: + * sha Error Code. + * + */ +int SHA384Reset(SHA384Context *context) +{ + return SHA384_512Reset(context, SHA384_H0); +} + +/* + * SHA384Input + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. + + + +Eastlake & Hansen Informational [Page 58] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_array[ ]: [in] + * An array of octets representing the next portion of + * the message. + * length: [in] + * The length of the message in message_array. + * + * Returns: + * sha Error Code. + * + */ +int SHA384Input(SHA384Context *context, + const uint8_t *message_array, unsigned int length) +{ + return SHA512Input(context, message_array, length); +} + +/* + * SHA384FinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + * + */ +int SHA384FinalBits(SHA384Context *context, + uint8_t message_bits, unsigned int length) +{ + return SHA512FinalBits(context, message_bits, length); +} + +/* + * SHA384Result + + + +Eastlake & Hansen Informational [Page 59] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * + * Description: + * This function will return the 384-bit message digest + * into the Message_Digest array provided by the caller. + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 47. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * + * Returns: + * sha Error Code. + * + */ +int SHA384Result(SHA384Context *context, + uint8_t Message_Digest[SHA384HashSize]) +{ + return SHA384_512ResultN(context, Message_Digest, SHA384HashSize); +} + +/* + * SHA512Reset + * + * Description: + * This function will initialize the SHA512Context in preparation + * for computing a new SHA512 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * + * Returns: + * sha Error Code. + * + */ +int SHA512Reset(SHA512Context *context) +{ + return SHA384_512Reset(context, SHA512_H0); +} + +/* + * SHA512Input + * + * Description: + + + +Eastlake & Hansen Informational [Page 60] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * This function accepts an array of octets as the next portion + * of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_array[ ]: [in] + * An array of octets representing the next portion of + * the message. + * length: [in] + * The length of the message in message_array. + * + * Returns: + * sha Error Code. + * + */ +int SHA512Input(SHA512Context *context, + const uint8_t *message_array, + unsigned int length) +{ + if (!context) return shaNull; + if (!length) return shaSuccess; + if (!message_array) return shaNull; + if (context->Computed) return context->Corrupted = shaStateError; + if (context->Corrupted) return context->Corrupted; + + while (length--) { + context->Message_Block[context->Message_Block_Index++] = + *message_array; + + if ((SHA384_512AddLength(context, 8) == shaSuccess) && + (context->Message_Block_Index == SHA512_Message_Block_Size)) + SHA384_512ProcessMessageBlock(context); + + message_array++; + } + + return context->Corrupted; +} + +/* + * SHA512FinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + + + +Eastlake & Hansen Informational [Page 61] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * The SHA context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + * + */ +int SHA512FinalBits(SHA512Context *context, + uint8_t message_bits, unsigned int length) +{ + static uint8_t masks[8] = { + /* 0 0b00000000 */ 0x00, /* 1 0b10000000 */ 0x80, + /* 2 0b11000000 */ 0xC0, /* 3 0b11100000 */ 0xE0, + /* 4 0b11110000 */ 0xF0, /* 5 0b11111000 */ 0xF8, + /* 6 0b11111100 */ 0xFC, /* 7 0b11111110 */ 0xFE + }; + static uint8_t markbit[8] = { + /* 0 0b10000000 */ 0x80, /* 1 0b01000000 */ 0x40, + /* 2 0b00100000 */ 0x20, /* 3 0b00010000 */ 0x10, + /* 4 0b00001000 */ 0x08, /* 5 0b00000100 */ 0x04, + /* 6 0b00000010 */ 0x02, /* 7 0b00000001 */ 0x01 + }; + + if (!context) return shaNull; + if (!length) return shaSuccess; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + if (length >= 8) return context->Corrupted = shaBadParam; + + SHA384_512AddLength(context, length); + SHA384_512Finalize(context, (uint8_t) + ((message_bits & masks[length]) | markbit[length])); + + return context->Corrupted; +} + +/* + * SHA512Result + * + * Description: + * This function will return the 512-bit message digest + * into the Message_Digest array provided by the caller. + * NOTE: + + + +Eastlake & Hansen Informational [Page 62] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 63. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * + * Returns: + * sha Error Code. + * + */ +int SHA512Result(SHA512Context *context, + uint8_t Message_Digest[SHA512HashSize]) +{ + return SHA384_512ResultN(context, Message_Digest, SHA512HashSize); +} + +/* + * SHA384_512Reset + * + * Description: + * This helper function will initialize the SHA512Context in + * preparation for computing a new SHA384 or SHA512 message + * digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * H0[ ]: [in] + * The initial hash value array to use. + * + * Returns: + * sha Error Code. + * + */ +#ifdef USE_32BIT_ONLY +static int SHA384_512Reset(SHA512Context *context, + uint32_t H0[SHA512HashSize/4]) +#else /* !USE_32BIT_ONLY */ +static int SHA384_512Reset(SHA512Context *context, + uint64_t H0[SHA512HashSize/8]) +#endif /* USE_32BIT_ONLY */ +{ + int i; + if (!context) return shaNull; + + + + +Eastlake & Hansen Informational [Page 63] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + context->Message_Block_Index = 0; + +#ifdef USE_32BIT_ONLY + context->Length[0] = context->Length[1] = + context->Length[2] = context->Length[3] = 0; + + for (i = 0; i < SHA512HashSize/4; i++) + context->Intermediate_Hash[i] = H0[i]; +#else /* !USE_32BIT_ONLY */ + context->Length_High = context->Length_Low = 0; + + for (i = 0; i < SHA512HashSize/8; i++) + context->Intermediate_Hash[i] = H0[i]; +#endif /* USE_32BIT_ONLY */ + + context->Computed = 0; + context->Corrupted = shaSuccess; + + return shaSuccess; +} + +/* + * SHA384_512ProcessMessageBlock + * + * Description: + * This helper function will process the next 1024 bits of the + * message stored in the Message_Block array. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * + * Returns: + * Nothing. + * + * Comments: + * Many of the variable names in this code, especially the + * single character names, were used because those were the + * names used in the Secure Hash Standard. + * + * + */ +static void SHA384_512ProcessMessageBlock(SHA512Context *context) +{ +#ifdef USE_32BIT_ONLY + /* Constants defined in FIPS 180-3, section 4.2.3 */ + static const uint32_t K[80*2] = { + 0x428A2F98, 0xD728AE22, 0x71374491, 0x23EF65CD, 0xB5C0FBCF, + + + +Eastlake & Hansen Informational [Page 64] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + 0xEC4D3B2F, 0xE9B5DBA5, 0x8189DBBC, 0x3956C25B, 0xF348B538, + 0x59F111F1, 0xB605D019, 0x923F82A4, 0xAF194F9B, 0xAB1C5ED5, + 0xDA6D8118, 0xD807AA98, 0xA3030242, 0x12835B01, 0x45706FBE, + 0x243185BE, 0x4EE4B28C, 0x550C7DC3, 0xD5FFB4E2, 0x72BE5D74, + 0xF27B896F, 0x80DEB1FE, 0x3B1696B1, 0x9BDC06A7, 0x25C71235, + 0xC19BF174, 0xCF692694, 0xE49B69C1, 0x9EF14AD2, 0xEFBE4786, + 0x384F25E3, 0x0FC19DC6, 0x8B8CD5B5, 0x240CA1CC, 0x77AC9C65, + 0x2DE92C6F, 0x592B0275, 0x4A7484AA, 0x6EA6E483, 0x5CB0A9DC, + 0xBD41FBD4, 0x76F988DA, 0x831153B5, 0x983E5152, 0xEE66DFAB, + 0xA831C66D, 0x2DB43210, 0xB00327C8, 0x98FB213F, 0xBF597FC7, + 0xBEEF0EE4, 0xC6E00BF3, 0x3DA88FC2, 0xD5A79147, 0x930AA725, + 0x06CA6351, 0xE003826F, 0x14292967, 0x0A0E6E70, 0x27B70A85, + 0x46D22FFC, 0x2E1B2138, 0x5C26C926, 0x4D2C6DFC, 0x5AC42AED, + 0x53380D13, 0x9D95B3DF, 0x650A7354, 0x8BAF63DE, 0x766A0ABB, + 0x3C77B2A8, 0x81C2C92E, 0x47EDAEE6, 0x92722C85, 0x1482353B, + 0xA2BFE8A1, 0x4CF10364, 0xA81A664B, 0xBC423001, 0xC24B8B70, + 0xD0F89791, 0xC76C51A3, 0x0654BE30, 0xD192E819, 0xD6EF5218, + 0xD6990624, 0x5565A910, 0xF40E3585, 0x5771202A, 0x106AA070, + 0x32BBD1B8, 0x19A4C116, 0xB8D2D0C8, 0x1E376C08, 0x5141AB53, + 0x2748774C, 0xDF8EEB99, 0x34B0BCB5, 0xE19B48A8, 0x391C0CB3, + 0xC5C95A63, 0x4ED8AA4A, 0xE3418ACB, 0x5B9CCA4F, 0x7763E373, + 0x682E6FF3, 0xD6B2B8A3, 0x748F82EE, 0x5DEFB2FC, 0x78A5636F, + 0x43172F60, 0x84C87814, 0xA1F0AB72, 0x8CC70208, 0x1A6439EC, + 0x90BEFFFA, 0x23631E28, 0xA4506CEB, 0xDE82BDE9, 0xBEF9A3F7, + 0xB2C67915, 0xC67178F2, 0xE372532B, 0xCA273ECE, 0xEA26619C, + 0xD186B8C7, 0x21C0C207, 0xEADA7DD6, 0xCDE0EB1E, 0xF57D4F7F, + 0xEE6ED178, 0x06F067AA, 0x72176FBA, 0x0A637DC5, 0xA2C898A6, + 0x113F9804, 0xBEF90DAE, 0x1B710B35, 0x131C471B, 0x28DB77F5, + 0x23047D84, 0x32CAAB7B, 0x40C72493, 0x3C9EBE0A, 0x15C9BEBC, + 0x431D67C4, 0x9C100D4C, 0x4CC5D4BE, 0xCB3E42B6, 0x597F299C, + 0xFC657E2A, 0x5FCB6FAB, 0x3AD6FAEC, 0x6C44198C, 0x4A475817 + }; + int t, t2, t8; /* Loop counter */ + uint32_t temp1[2], temp2[2], /* Temporary word values */ + temp3[2], temp4[2], temp5[2]; + uint32_t W[2*80]; /* Word sequence */ + uint32_t A[2], B[2], C[2], D[2], /* Word buffers */ + E[2], F[2], G[2], H[2]; + + /* Initialize the first 16 words in the array W */ + for (t = t2 = t8 = 0; t < 16; t++, t8 += 8) { + W[t2++] = ((((uint32_t)context->Message_Block[t8 ])) << 24) | + ((((uint32_t)context->Message_Block[t8 + 1])) << 16) | + ((((uint32_t)context->Message_Block[t8 + 2])) << 8) | + ((((uint32_t)context->Message_Block[t8 + 3]))); + W[t2++] = ((((uint32_t)context->Message_Block[t8 + 4])) << 24) | + ((((uint32_t)context->Message_Block[t8 + 5])) << 16) | + ((((uint32_t)context->Message_Block[t8 + 6])) << 8) | + + + +Eastlake & Hansen Informational [Page 65] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + ((((uint32_t)context->Message_Block[t8 + 7]))); + } + + for (t = 16; t < 80; t++, t2 += 2) { + /* W[t] = SHA512_sigma1(W[t-2]) + W[t-7] + + SHA512_sigma0(W[t-15]) + W[t-16]; */ + uint32_t *Wt2 = &W[t2-2*2]; + uint32_t *Wt7 = &W[t2-7*2]; + uint32_t *Wt15 = &W[t2-15*2]; + uint32_t *Wt16 = &W[t2-16*2]; + SHA512_sigma1(Wt2, temp1); + SHA512_ADD(temp1, Wt7, temp2); + SHA512_sigma0(Wt15, temp1); + SHA512_ADD(temp1, Wt16, temp3); + SHA512_ADD(temp2, temp3, &W[t2]); + } + + A[0] = context->Intermediate_Hash[0]; + A[1] = context->Intermediate_Hash[1]; + B[0] = context->Intermediate_Hash[2]; + B[1] = context->Intermediate_Hash[3]; + C[0] = context->Intermediate_Hash[4]; + C[1] = context->Intermediate_Hash[5]; + D[0] = context->Intermediate_Hash[6]; + D[1] = context->Intermediate_Hash[7]; + E[0] = context->Intermediate_Hash[8]; + E[1] = context->Intermediate_Hash[9]; + F[0] = context->Intermediate_Hash[10]; + F[1] = context->Intermediate_Hash[11]; + G[0] = context->Intermediate_Hash[12]; + G[1] = context->Intermediate_Hash[13]; + H[0] = context->Intermediate_Hash[14]; + H[1] = context->Intermediate_Hash[15]; + + for (t = t2 = 0; t < 80; t++, t2 += 2) { + /* + * temp1 = H + SHA512_SIGMA1(E) + SHA_Ch(E,F,G) + K[t] + W[t]; + */ + SHA512_SIGMA1(E,temp1); + SHA512_ADD(H, temp1, temp2); + SHA_Ch(E,F,G,temp3); + SHA512_ADD(temp2, temp3, temp4); + SHA512_ADD(&K[t2], &W[t2], temp5); + SHA512_ADD(temp4, temp5, temp1); + /* + * temp2 = SHA512_SIGMA0(A) + SHA_Maj(A,B,C); + */ + SHA512_SIGMA0(A,temp3); + + + +Eastlake & Hansen Informational [Page 66] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + SHA_Maj(A,B,C,temp4); + SHA512_ADD(temp3, temp4, temp2); + H[0] = G[0]; H[1] = G[1]; + G[0] = F[0]; G[1] = F[1]; + F[0] = E[0]; F[1] = E[1]; + SHA512_ADD(D, temp1, E); + D[0] = C[0]; D[1] = C[1]; + C[0] = B[0]; C[1] = B[1]; + B[0] = A[0]; B[1] = A[1]; + SHA512_ADD(temp1, temp2, A); + } + + SHA512_ADDTO2(&context->Intermediate_Hash[0], A); + SHA512_ADDTO2(&context->Intermediate_Hash[2], B); + SHA512_ADDTO2(&context->Intermediate_Hash[4], C); + SHA512_ADDTO2(&context->Intermediate_Hash[6], D); + SHA512_ADDTO2(&context->Intermediate_Hash[8], E); + SHA512_ADDTO2(&context->Intermediate_Hash[10], F); + SHA512_ADDTO2(&context->Intermediate_Hash[12], G); + SHA512_ADDTO2(&context->Intermediate_Hash[14], H); + +#else /* !USE_32BIT_ONLY */ + /* Constants defined in FIPS 180-3, section 4.2.3 */ + static const uint64_t K[80] = { + 0x428A2F98D728AE22ll, 0x7137449123EF65CDll, 0xB5C0FBCFEC4D3B2Fll, + 0xE9B5DBA58189DBBCll, 0x3956C25BF348B538ll, 0x59F111F1B605D019ll, + 0x923F82A4AF194F9Bll, 0xAB1C5ED5DA6D8118ll, 0xD807AA98A3030242ll, + 0x12835B0145706FBEll, 0x243185BE4EE4B28Cll, 0x550C7DC3D5FFB4E2ll, + 0x72BE5D74F27B896Fll, 0x80DEB1FE3B1696B1ll, 0x9BDC06A725C71235ll, + 0xC19BF174CF692694ll, 0xE49B69C19EF14AD2ll, 0xEFBE4786384F25E3ll, + 0x0FC19DC68B8CD5B5ll, 0x240CA1CC77AC9C65ll, 0x2DE92C6F592B0275ll, + 0x4A7484AA6EA6E483ll, 0x5CB0A9DCBD41FBD4ll, 0x76F988DA831153B5ll, + 0x983E5152EE66DFABll, 0xA831C66D2DB43210ll, 0xB00327C898FB213Fll, + 0xBF597FC7BEEF0EE4ll, 0xC6E00BF33DA88FC2ll, 0xD5A79147930AA725ll, + 0x06CA6351E003826Fll, 0x142929670A0E6E70ll, 0x27B70A8546D22FFCll, + 0x2E1B21385C26C926ll, 0x4D2C6DFC5AC42AEDll, 0x53380D139D95B3DFll, + 0x650A73548BAF63DEll, 0x766A0ABB3C77B2A8ll, 0x81C2C92E47EDAEE6ll, + 0x92722C851482353Bll, 0xA2BFE8A14CF10364ll, 0xA81A664BBC423001ll, + 0xC24B8B70D0F89791ll, 0xC76C51A30654BE30ll, 0xD192E819D6EF5218ll, + 0xD69906245565A910ll, 0xF40E35855771202All, 0x106AA07032BBD1B8ll, + 0x19A4C116B8D2D0C8ll, 0x1E376C085141AB53ll, 0x2748774CDF8EEB99ll, + 0x34B0BCB5E19B48A8ll, 0x391C0CB3C5C95A63ll, 0x4ED8AA4AE3418ACBll, + 0x5B9CCA4F7763E373ll, 0x682E6FF3D6B2B8A3ll, 0x748F82EE5DEFB2FCll, + 0x78A5636F43172F60ll, 0x84C87814A1F0AB72ll, 0x8CC702081A6439ECll, + 0x90BEFFFA23631E28ll, 0xA4506CEBDE82BDE9ll, 0xBEF9A3F7B2C67915ll, + 0xC67178F2E372532Bll, 0xCA273ECEEA26619Cll, 0xD186B8C721C0C207ll, + 0xEADA7DD6CDE0EB1Ell, 0xF57D4F7FEE6ED178ll, 0x06F067AA72176FBAll, + 0x0A637DC5A2C898A6ll, 0x113F9804BEF90DAEll, 0x1B710B35131C471Bll, + + + +Eastlake & Hansen Informational [Page 67] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + 0x28DB77F523047D84ll, 0x32CAAB7B40C72493ll, 0x3C9EBE0A15C9BEBCll, + 0x431D67C49C100D4Cll, 0x4CC5D4BECB3E42B6ll, 0x597F299CFC657E2All, + 0x5FCB6FAB3AD6FAECll, 0x6C44198C4A475817ll + }; + int t, t8; /* Loop counter */ + uint64_t temp1, temp2; /* Temporary word value */ + uint64_t W[80]; /* Word sequence */ + uint64_t A, B, C, D, E, F, G, H; /* Word buffers */ + + /* + * Initialize the first 16 words in the array W + */ + for (t = t8 = 0; t < 16; t++, t8 += 8) + W[t] = ((uint64_t)(context->Message_Block[t8 ]) << 56) | + ((uint64_t)(context->Message_Block[t8 + 1]) << 48) | + ((uint64_t)(context->Message_Block[t8 + 2]) << 40) | + ((uint64_t)(context->Message_Block[t8 + 3]) << 32) | + ((uint64_t)(context->Message_Block[t8 + 4]) << 24) | + ((uint64_t)(context->Message_Block[t8 + 5]) << 16) | + ((uint64_t)(context->Message_Block[t8 + 6]) << 8) | + ((uint64_t)(context->Message_Block[t8 + 7])); + + for (t = 16; t < 80; t++) + W[t] = SHA512_sigma1(W[t-2]) + W[t-7] + + SHA512_sigma0(W[t-15]) + W[t-16]; + A = context->Intermediate_Hash[0]; + B = context->Intermediate_Hash[1]; + C = context->Intermediate_Hash[2]; + D = context->Intermediate_Hash[3]; + E = context->Intermediate_Hash[4]; + F = context->Intermediate_Hash[5]; + G = context->Intermediate_Hash[6]; + H = context->Intermediate_Hash[7]; + + for (t = 0; t < 80; t++) { + temp1 = H + SHA512_SIGMA1(E) + SHA_Ch(E,F,G) + K[t] + W[t]; + temp2 = SHA512_SIGMA0(A) + SHA_Maj(A,B,C); + H = G; + G = F; + F = E; + E = D + temp1; + D = C; + C = B; + B = A; + A = temp1 + temp2; + } + + context->Intermediate_Hash[0] += A; + + + +Eastlake & Hansen Informational [Page 68] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + context->Intermediate_Hash[1] += B; + context->Intermediate_Hash[2] += C; + context->Intermediate_Hash[3] += D; + context->Intermediate_Hash[4] += E; + context->Intermediate_Hash[5] += F; + context->Intermediate_Hash[6] += G; + context->Intermediate_Hash[7] += H; +#endif /* USE_32BIT_ONLY */ + + context->Message_Block_Index = 0; +} + +/* + * SHA384_512Finalize + * + * Description: + * This helper function finishes off the digest calculations. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * Pad_Byte: [in] + * The last byte to add to the message block before the 0-padding + * and length. This will contain the last bits of the message + * followed by another single bit. If the message was an + * exact multiple of 8-bits long, Pad_Byte will be 0x80. + * + * Returns: + * sha Error Code. + * + */ +static void SHA384_512Finalize(SHA512Context *context, + uint8_t Pad_Byte) +{ + int_least16_t i; + SHA384_512PadMessage(context, Pad_Byte); + /* message may be sensitive, clear it out */ + for (i = 0; i < SHA512_Message_Block_Size; ++i) + context->Message_Block[i] = 0; +#ifdef USE_32BIT_ONLY /* and clear length */ + context->Length[0] = context->Length[1] = 0; + context->Length[2] = context->Length[3] = 0; +#else /* !USE_32BIT_ONLY */ + context->Length_High = context->Length_Low = 0; +#endif /* USE_32BIT_ONLY */ + context->Computed = 1; +} + + + + +Eastlake & Hansen Informational [Page 69] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +/* + * SHA384_512PadMessage + * + * Description: + * According to the standard, the message must be padded to the next + * even multiple of 1024 bits. The first padding bit must be a '1'. + * The last 128 bits represent the length of the original message. + * All bits in between should be 0. This helper function will + * pad the message according to those rules by filling the + * Message_Block array accordingly. When it returns, it can be + * assumed that the message digest has been computed. + * + * Parameters: + * context: [in/out] + * The context to pad. + * Pad_Byte: [in] + * The last byte to add to the message block before the 0-padding + * and length. This will contain the last bits of the message + * followed by another single bit. If the message was an + * exact multiple of 8-bits long, Pad_Byte will be 0x80. + * + * Returns: + * Nothing. + * + */ +static void SHA384_512PadMessage(SHA512Context *context, + uint8_t Pad_Byte) +{ + /* + * Check to see if the current message block is too small to hold + * the initial padding bits and length. If so, we will pad the + * block, process it, and then continue padding into a second + * block. + */ + if (context->Message_Block_Index >= (SHA512_Message_Block_Size-16)) { + context->Message_Block[context->Message_Block_Index++] = Pad_Byte; + while (context->Message_Block_Index < SHA512_Message_Block_Size) + context->Message_Block[context->Message_Block_Index++] = 0; + + SHA384_512ProcessMessageBlock(context); + } else + context->Message_Block[context->Message_Block_Index++] = Pad_Byte; + + while (context->Message_Block_Index < (SHA512_Message_Block_Size-16)) + context->Message_Block[context->Message_Block_Index++] = 0; + + /* + * Store the message length as the last 16 octets + + + +Eastlake & Hansen Informational [Page 70] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + */ +#ifdef USE_32BIT_ONLY + context->Message_Block[112] = (uint8_t)(context->Length[0] >> 24); + context->Message_Block[113] = (uint8_t)(context->Length[0] >> 16); + context->Message_Block[114] = (uint8_t)(context->Length[0] >> 8); + context->Message_Block[115] = (uint8_t)(context->Length[0]); + context->Message_Block[116] = (uint8_t)(context->Length[1] >> 24); + context->Message_Block[117] = (uint8_t)(context->Length[1] >> 16); + context->Message_Block[118] = (uint8_t)(context->Length[1] >> 8); + context->Message_Block[119] = (uint8_t)(context->Length[1]); + + context->Message_Block[120] = (uint8_t)(context->Length[2] >> 24); + context->Message_Block[121] = (uint8_t)(context->Length[2] >> 16); + context->Message_Block[122] = (uint8_t)(context->Length[2] >> 8); + context->Message_Block[123] = (uint8_t)(context->Length[2]); + context->Message_Block[124] = (uint8_t)(context->Length[3] >> 24); + context->Message_Block[125] = (uint8_t)(context->Length[3] >> 16); + context->Message_Block[126] = (uint8_t)(context->Length[3] >> 8); + context->Message_Block[127] = (uint8_t)(context->Length[3]); +#else /* !USE_32BIT_ONLY */ + context->Message_Block[112] = (uint8_t)(context->Length_High >> 56); + context->Message_Block[113] = (uint8_t)(context->Length_High >> 48); + context->Message_Block[114] = (uint8_t)(context->Length_High >> 40); + context->Message_Block[115] = (uint8_t)(context->Length_High >> 32); + context->Message_Block[116] = (uint8_t)(context->Length_High >> 24); + context->Message_Block[117] = (uint8_t)(context->Length_High >> 16); + context->Message_Block[118] = (uint8_t)(context->Length_High >> 8); + context->Message_Block[119] = (uint8_t)(context->Length_High); + + context->Message_Block[120] = (uint8_t)(context->Length_Low >> 56); + context->Message_Block[121] = (uint8_t)(context->Length_Low >> 48); + context->Message_Block[122] = (uint8_t)(context->Length_Low >> 40); + context->Message_Block[123] = (uint8_t)(context->Length_Low >> 32); + context->Message_Block[124] = (uint8_t)(context->Length_Low >> 24); + context->Message_Block[125] = (uint8_t)(context->Length_Low >> 16); + context->Message_Block[126] = (uint8_t)(context->Length_Low >> 8); + context->Message_Block[127] = (uint8_t)(context->Length_Low); +#endif /* USE_32BIT_ONLY */ + + SHA384_512ProcessMessageBlock(context); +} + +/* + * SHA384_512ResultN + * + * Description: + * This helper function will return the 384-bit or 512-bit message + * digest into the Message_Digest array provided by the caller. + + + +Eastlake & Hansen Informational [Page 71] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 47/63. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * HashSize: [in] + * The size of the hash, either 48 or 64. + * + * Returns: + * sha Error Code. + * + */ +static int SHA384_512ResultN(SHA512Context *context, + uint8_t Message_Digest[ ], int HashSize) +{ + int i; +#ifdef USE_32BIT_ONLY + int i2; +#endif /* USE_32BIT_ONLY */ + + if (!context) return shaNull; + if (!Message_Digest) return shaNull; + if (context->Corrupted) return context->Corrupted; + + if (!context->Computed) + SHA384_512Finalize(context, 0x80); + +#ifdef USE_32BIT_ONLY + for (i = i2 = 0; i < HashSize; ) { + Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>24); + Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>16); + Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>8); + Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2++]); + Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>24); + Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>16); + Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>8); + Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2++]); + } +#else /* !USE_32BIT_ONLY */ + for (i = 0; i < HashSize; ++i) + Message_Digest[i] = (uint8_t) + (context->Intermediate_Hash[i>>3] >> 8 * ( 7 - ( i % 8 ) )); +#endif /* USE_32BIT_ONLY */ + + + + +Eastlake & Hansen Informational [Page 72] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + return shaSuccess; +} + +8.2.4. usha.c + +/**************************** usha.c ***************************/ +/***************** See RFC 6234 for details. *******************/ +/* Copyright (c) 2011 IETF Trust and the persons identified as */ +/* authors of the code. All rights reserved. */ +/* See sha.h for terms of use and redistribution. */ + +/* + * Description: + * This file implements a unified interface to the SHA algorithms. + */ + +#include "sha.h" + +/* + * USHAReset + * + * Description: + * This function will initialize the SHA Context in preparation + * for computing a new SHA message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * whichSha: [in] + * Selects which SHA reset to call + * + * Returns: + * sha Error Code. + * + */ +int USHAReset(USHAContext *context, enum SHAversion whichSha) +{ + if (!context) return shaNull; + context->whichSha = whichSha; + switch (whichSha) { + case SHA1: return SHA1Reset((SHA1Context*)&context->ctx); + case SHA224: return SHA224Reset((SHA224Context*)&context->ctx); + case SHA256: return SHA256Reset((SHA256Context*)&context->ctx); + case SHA384: return SHA384Reset((SHA384Context*)&context->ctx); + case SHA512: return SHA512Reset((SHA512Context*)&context->ctx); + default: return shaBadParam; + } +} + + + +Eastlake & Hansen Informational [Page 73] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +/* + * USHAInput + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_array: [in] + * An array of octets representing the next portion of + * the message. + * length: [in] + * The length of the message in message_array. + * + * Returns: + * sha Error Code. + * + */ +int USHAInput(USHAContext *context, + const uint8_t *bytes, unsigned int bytecount) +{ + if (!context) return shaNull; + switch (context->whichSha) { + case SHA1: + return SHA1Input((SHA1Context*)&context->ctx, bytes, + bytecount); + case SHA224: + return SHA224Input((SHA224Context*)&context->ctx, bytes, + bytecount); + case SHA256: + return SHA256Input((SHA256Context*)&context->ctx, bytes, + bytecount); + case SHA384: + return SHA384Input((SHA384Context*)&context->ctx, bytes, + bytecount); + case SHA512: + return SHA512Input((SHA512Context*)&context->ctx, bytes, + bytecount); + default: return shaBadParam; + } +} + + + + + + + + +Eastlake & Hansen Informational [Page 74] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +/* + * USHAFinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + */ +int USHAFinalBits(USHAContext *context, + uint8_t bits, unsigned int bit_count) +{ + if (!context) return shaNull; + switch (context->whichSha) { + case SHA1: + return SHA1FinalBits((SHA1Context*)&context->ctx, bits, + bit_count); + case SHA224: + return SHA224FinalBits((SHA224Context*)&context->ctx, bits, + bit_count); + case SHA256: + return SHA256FinalBits((SHA256Context*)&context->ctx, bits, + bit_count); + case SHA384: + return SHA384FinalBits((SHA384Context*)&context->ctx, bits, + bit_count); + case SHA512: + return SHA512FinalBits((SHA512Context*)&context->ctx, bits, + bit_count); + default: return shaBadParam; + } +} + + + + + + + + + +Eastlake & Hansen Informational [Page 75] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +/* + * USHAResult + * + * Description: + * This function will return the message digest of the appropriate + * bit size, as returned by USHAHashSizeBits(whichSHA) for the + * 'whichSHA' value used in the preceeding call to USHAReset, + * into the Message_Digest array provided by the caller. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA-1 hash. + * Message_Digest: [out] + * Where the digest is returned. + * + * Returns: + * sha Error Code. + * + */ +int USHAResult(USHAContext *context, + uint8_t Message_Digest[USHAMaxHashSize]) +{ + if (!context) return shaNull; + switch (context->whichSha) { + case SHA1: + return SHA1Result((SHA1Context*)&context->ctx, Message_Digest); + case SHA224: + return SHA224Result((SHA224Context*)&context->ctx, + Message_Digest); + case SHA256: + return SHA256Result((SHA256Context*)&context->ctx, + Message_Digest); + case SHA384: + return SHA384Result((SHA384Context*)&context->ctx, + Message_Digest); + case SHA512: + return SHA512Result((SHA512Context*)&context->ctx, + Message_Digest); + default: return shaBadParam; + } +} + +/* + * USHABlockSize + * + * Description: + * This function will return the blocksize for the given SHA + * algorithm. + + + +Eastlake & Hansen Informational [Page 76] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * + * Parameters: + * whichSha: + * which SHA algorithm to query + * + * Returns: + * block size + * + */ +int USHABlockSize(enum SHAversion whichSha) +{ + switch (whichSha) { + case SHA1: return SHA1_Message_Block_Size; + case SHA224: return SHA224_Message_Block_Size; + case SHA256: return SHA256_Message_Block_Size; + case SHA384: return SHA384_Message_Block_Size; + default: + case SHA512: return SHA512_Message_Block_Size; + } +} + +/* + * USHAHashSize + * + * Description: + * This function will return the hashsize for the given SHA + * algorithm. + * + * Parameters: + * whichSha: + * which SHA algorithm to query + * + * Returns: + * hash size + * + */ +int USHAHashSize(enum SHAversion whichSha) +{ + switch (whichSha) { + case SHA1: return SHA1HashSize; + case SHA224: return SHA224HashSize; + case SHA256: return SHA256HashSize; + case SHA384: return SHA384HashSize; + default: + case SHA512: return SHA512HashSize; + } +} + + + + +Eastlake & Hansen Informational [Page 77] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +/* + * USHAHashSizeBits + * + * Description: + * This function will return the hashsize for the given SHA + * algorithm, expressed in bits. + * + * Parameters: + * whichSha: + * which SHA algorithm to query + * + * Returns: + * hash size in bits + * + */ +int USHAHashSizeBits(enum SHAversion whichSha) +{ + switch (whichSha) { + case SHA1: return SHA1HashSizeBits; + case SHA224: return SHA224HashSizeBits; + case SHA256: return SHA256HashSizeBits; + case SHA384: return SHA384HashSizeBits; + default: + case SHA512: return SHA512HashSizeBits; + } +} + +/* + * USHAHashName + * + * Description: + * This function will return the name of the given SHA algorithm + * as a string. + * + * Parameters: + * whichSha: + * which SHA algorithm to query + * + * Returns: + * character string with the name in it + * + */ +const char *USHAHashName(enum SHAversion whichSha) +{ + switch (whichSha) { + case SHA1: return "SHA1"; + case SHA224: return "SHA224"; + case SHA256: return "SHA256"; + + + +Eastlake & Hansen Informational [Page 78] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + case SHA384: return "SHA384"; + default: + case SHA512: return "SHA512"; + } +} + +8.3. The HMAC Code + +/**************************** hmac.c ***************************/ +/***************** See RFC 6234 for details. *******************/ +/* Copyright (c) 2011 IETF Trust and the persons identified as */ +/* authors of the code. All rights reserved. */ +/* See sha.h for terms of use and redistribution. */ + +/* + * Description: + * This file implements the HMAC algorithm (Keyed-Hashing for + * Message Authentication, [RFC 2104]), expressed in terms of + * the various SHA algorithms. + */ + +#include "sha.h" + +/* + * hmac + * + * Description: + * This function will compute an HMAC message digest. + * + * Parameters: + * whichSha: [in] + * One of SHA1, SHA224, SHA256, SHA384, SHA512 + * message_array[ ]: [in] + * An array of octets representing the message. + * Note: in RFC 2104, this parameter is known + * as 'text'. + * length: [in] + * The length of the message in message_array. + * key[ ]: [in] + * The secret shared key. + * key_len: [in] + * The length of the secret shared key. + * digest[ ]: [out] + * Where the digest is to be returned. + * NOTE: The length of the digest is determined by + * the value of whichSha. + * + + + + +Eastlake & Hansen Informational [Page 79] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * Returns: + * sha Error Code. + * + */ + +int hmac(SHAversion whichSha, + const unsigned char *message_array, int length, + const unsigned char *key, int key_len, + uint8_t digest[USHAMaxHashSize]) +{ + HMACContext context; + return hmacReset(&context, whichSha, key, key_len) || + hmacInput(&context, message_array, length) || + hmacResult(&context, digest); +} + +/* + * hmacReset + * + * Description: + * This function will initialize the hmacContext in preparation + * for computing a new HMAC message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * whichSha: [in] + * One of SHA1, SHA224, SHA256, SHA384, SHA512 + * key[ ]: [in] + * The secret shared key. + * key_len: [in] + * The length of the secret shared key. + * + * Returns: + * sha Error Code. + * + */ +int hmacReset(HMACContext *context, enum SHAversion whichSha, + const unsigned char *key, int key_len) +{ + int i, blocksize, hashsize, ret; + + /* inner padding - key XORd with ipad */ + unsigned char k_ipad[USHA_Max_Message_Block_Size]; + + /* temporary buffer when keylen > blocksize */ + unsigned char tempkey[USHAMaxHashSize]; + + + + +Eastlake & Hansen Informational [Page 80] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + if (!context) return shaNull; + context->Computed = 0; + context->Corrupted = shaSuccess; + + blocksize = context->blockSize = USHABlockSize(whichSha); + hashsize = context->hashSize = USHAHashSize(whichSha); + context->whichSha = whichSha; + + /* + * If key is longer than the hash blocksize, + * reset it to key = HASH(key). + */ + if (key_len > blocksize) { + USHAContext tcontext; + int err = USHAReset(&tcontext, whichSha) || + USHAInput(&tcontext, key, key_len) || + USHAResult(&tcontext, tempkey); + if (err != shaSuccess) return err; + + key = tempkey; + key_len = hashsize; + } + + /* + * The HMAC transform looks like: + * + * SHA(K XOR opad, SHA(K XOR ipad, text)) + * + * where K is an n byte key, 0-padded to a total of blocksize bytes, + * ipad is the byte 0x36 repeated blocksize times, + * opad is the byte 0x5c repeated blocksize times, + * and text is the data being protected. + */ + + /* store key into the pads, XOR'd with ipad and opad values */ + for (i = 0; i < key_len; i++) { + k_ipad[i] = key[i] ^ 0x36; + context->k_opad[i] = key[i] ^ 0x5c; + } + /* remaining pad bytes are '\0' XOR'd with ipad and opad values */ + for ( ; i < blocksize; i++) { + k_ipad[i] = 0x36; + context->k_opad[i] = 0x5c; + } + + /* perform inner hash */ + /* init context for 1st pass */ + ret = USHAReset(&context->shaContext, whichSha) || + + + +Eastlake & Hansen Informational [Page 81] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + /* and start with inner pad */ + USHAInput(&context->shaContext, k_ipad, blocksize); + return context->Corrupted = ret; +} + +/* + * hmacInput + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. It may be called multiple times. + * + * Parameters: + * context: [in/out] + * The HMAC context to update. + * text[ ]: [in] + * An array of octets representing the next portion of + * the message. + * text_len: [in] + * The length of the message in text. + * + * Returns: + * sha Error Code. + * + */ +int hmacInput(HMACContext *context, const unsigned char *text, + int text_len) +{ + if (!context) return shaNull; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + /* then text of datagram */ + return context->Corrupted = + USHAInput(&context->shaContext, text, text_len); +} + +/* + * hmacFinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + * The HMAC context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + + + +Eastlake & Hansen Informational [Page 82] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + */ +int hmacFinalBits(HMACContext *context, + uint8_t bits, unsigned int bit_count) +{ + if (!context) return shaNull; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + /* then final bits of datagram */ + return context->Corrupted = + USHAFinalBits(&context->shaContext, bits, bit_count); +} + +/* + * hmacResult + * + * Description: + * This function will return the N-byte message digest into the + * Message_Digest array provided by the caller. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the HMAC hash. + * digest[ ]: [out] + * Where the digest is returned. + * NOTE 2: The length of the hash is determined by the value of + * whichSha that was passed to hmacReset(). + * + * Returns: + * sha Error Code. + * + */ +int hmacResult(HMACContext *context, uint8_t *digest) +{ + int ret; + if (!context) return shaNull; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + + /* finish up 1st pass */ + /* (Use digest here as a temporary buffer.) */ + ret = + USHAResult(&context->shaContext, digest) || + + + +Eastlake & Hansen Informational [Page 83] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + /* perform outer SHA */ + /* init context for 2nd pass */ + USHAReset(&context->shaContext, context->whichSha) || + + /* start with outer pad */ + USHAInput(&context->shaContext, context->k_opad, + context->blockSize) || + + /* then results of 1st hash */ + USHAInput(&context->shaContext, digest, context->hashSize) || + /* finish up 2nd pass */ + USHAResult(&context->shaContext, digest); + + context->Computed = 1; + return context->Corrupted = ret; +} + +8.4. The HKDF Code + +/**************************** hkdf.c ***************************/ +/***************** See RFC 6234 for details. *******************/ +/* Copyright (c) 2011 IETF Trust and the persons identified as */ +/* authors of the code. All rights reserved. */ +/* See sha.h for terms of use and redistribution. */ + +/* + * Description: + * This file implements the HKDF algorithm (HMAC-based + * Extract-and-Expand Key Derivation Function, RFC 5869), + * expressed in terms of the various SHA algorithms. + */ + +#include "sha.h" +#include <string.h> +#include <stdlib.h> + +/* + * hkdf + * + * Description: + * This function will generate keying material using HKDF. + * + * Parameters: + * whichSha: [in] + * One of SHA1, SHA224, SHA256, SHA384, SHA512 + * salt[ ]: [in] + * The optional salt value (a non-secret random value); + * if not provided (salt == NULL), it is set internally + + + +Eastlake & Hansen Informational [Page 84] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * to a string of HashLen(whichSha) zeros. + * salt_len: [in] + * The length of the salt value. (Ignored if salt == NULL.) + * ikm[ ]: [in] + * Input keying material. + * ikm_len: [in] + * The length of the input keying material. + * info[ ]: [in] + * The optional context and application specific information. + * If info == NULL or a zero-length string, it is ignored. + * info_len: [in] + * The length of the optional context and application specific + * information. (Ignored if info == NULL.) + * okm[ ]: [out] + * Where the HKDF is to be stored. + * okm_len: [in] + * The length of the buffer to hold okm. + * okm_len must be <= 255 * USHABlockSize(whichSha) + * + * Notes: + * Calls hkdfExtract() and hkdfExpand(). + * + * Returns: + * sha Error Code. + * + */ +int hkdf(SHAversion whichSha, + const unsigned char *salt, int salt_len, + const unsigned char *ikm, int ikm_len, + const unsigned char *info, int info_len, + uint8_t okm[ ], int okm_len) +{ + uint8_t prk[USHAMaxHashSize]; + return hkdfExtract(whichSha, salt, salt_len, ikm, ikm_len, prk) || + hkdfExpand(whichSha, prk, USHAHashSize(whichSha), info, + info_len, okm, okm_len); +} + +/* + * hkdfExtract + * + * Description: + * This function will perform HKDF extraction. + * + * Parameters: + * whichSha: [in] + * One of SHA1, SHA224, SHA256, SHA384, SHA512 + * salt[ ]: [in] + + + +Eastlake & Hansen Informational [Page 85] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * The optional salt value (a non-secret random value); + * if not provided (salt == NULL), it is set internally + * to a string of HashLen(whichSha) zeros. + * salt_len: [in] + * The length of the salt value. (Ignored if salt == NULL.) + * ikm[ ]: [in] + * Input keying material. + * ikm_len: [in] + * The length of the input keying material. + * prk[ ]: [out] + * Array where the HKDF extraction is to be stored. + * Must be larger than USHAHashSize(whichSha); + * + * Returns: + * sha Error Code. + * + */ +int hkdfExtract(SHAversion whichSha, + const unsigned char *salt, int salt_len, + const unsigned char *ikm, int ikm_len, + uint8_t prk[USHAMaxHashSize]) +{ + unsigned char nullSalt[USHAMaxHashSize]; + if (salt == 0) { + salt = nullSalt; + salt_len = USHAHashSize(whichSha); + memset(nullSalt, '\0', salt_len); + } else if (salt_len < 0) { + return shaBadParam; + } + return hmac(whichSha, ikm, ikm_len, salt, salt_len, prk); +} + +/* + * hkdfExpand + * + * Description: + * This function will perform HKDF expansion. + * + * Parameters: + * whichSha: [in] + * One of SHA1, SHA224, SHA256, SHA384, SHA512 + * prk[ ]: [in] + * The pseudo-random key to be expanded; either obtained + * directly from a cryptographically strong, uniformly + * distributed pseudo-random number generator, or as the + * output from hkdfExtract(). + * prk_len: [in] + + + +Eastlake & Hansen Informational [Page 86] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * The length of the pseudo-random key in prk; + * should at least be equal to USHAHashSize(whichSHA). + * info[ ]: [in] + * The optional context and application specific information. + * If info == NULL or a zero-length string, it is ignored. + * info_len: [in] + * The length of the optional context and application specific + * information. (Ignored if info == NULL.) + * okm[ ]: [out] + * Where the HKDF is to be stored. + * okm_len: [in] + * The length of the buffer to hold okm. + * okm_len must be <= 255 * USHABlockSize(whichSha) + * + * Returns: + * sha Error Code. + * + */ +int hkdfExpand(SHAversion whichSha, const uint8_t prk[ ], int prk_len, + const unsigned char *info, int info_len, + uint8_t okm[ ], int okm_len) +{ + int hash_len, N; + unsigned char T[USHAMaxHashSize]; + int Tlen, where, i; + + if (info == 0) { + info = (const unsigned char *)""; + info_len = 0; + } else if (info_len < 0) { + return shaBadParam; + } + if (okm_len <= 0) return shaBadParam; + if (!okm) return shaBadParam; + + hash_len = USHAHashSize(whichSha); + if (prk_len < hash_len) return shaBadParam; + N = okm_len / hash_len; + if ((okm_len % hash_len) != 0) N++; + if (N > 255) return shaBadParam; + + Tlen = 0; + where = 0; + for (i = 1; i <= N; i++) { + HMACContext context; + unsigned char c = i; + int ret = hmacReset(&context, whichSha, prk, prk_len) || + hmacInput(&context, T, Tlen) || + + + +Eastlake & Hansen Informational [Page 87] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + hmacInput(&context, info, info_len) || + hmacInput(&context, &c, 1) || + hmacResult(&context, T); + if (ret != shaSuccess) return ret; + memcpy(okm + where, T, + (i != N) ? hash_len : (okm_len - where)); + where += hash_len; + Tlen = hash_len; + } + return shaSuccess; +} + +/* + * hkdfReset + * + * Description: + * This function will initialize the hkdfContext in preparation + * for key derivation using the modular HKDF interface for + * arbitrary length inputs. + * + * Parameters: + * context: [in/out] + * The context to reset. + * whichSha: [in] + * One of SHA1, SHA224, SHA256, SHA384, SHA512 + * salt[ ]: [in] + * The optional salt value (a non-secret random value); + * if not provided (salt == NULL), it is set internally + * to a string of HashLen(whichSha) zeros. + * salt_len: [in] + * The length of the salt value. (Ignored if salt == NULL.) + * + * Returns: + * sha Error Code. + * + */ +int hkdfReset(HKDFContext *context, enum SHAversion whichSha, + const unsigned char *salt, int salt_len) +{ + unsigned char nullSalt[USHAMaxHashSize]; + if (!context) return shaNull; + + context->whichSha = whichSha; + context->hashSize = USHAHashSize(whichSha); + if (salt == 0) { + salt = nullSalt; + salt_len = context->hashSize; + memset(nullSalt, '\0', salt_len); + + + +Eastlake & Hansen Informational [Page 88] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + } + + return hmacReset(&context->hmacContext, whichSha, salt, salt_len); +} + +/* + * hkdfInput + * + * Description: + * This function accepts an array of octets as the next portion + * of the input keying material. It may be called multiple times. + * + * Parameters: + * context: [in/out] + * The HKDF context to update. + * ikm[ ]: [in] + * An array of octets representing the next portion of + * the input keying material. + * ikm_len: [in] + * The length of ikm. + * + * Returns: + * sha Error Code. + * + */ +int hkdfInput(HKDFContext *context, const unsigned char *ikm, + int ikm_len) +{ + if (!context) return shaNull; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + return hmacInput(&context->hmacContext, ikm, ikm_len); +} + +/* + * hkdfFinalBits + * + * Description: + * This function will add in any final bits of the + * input keying material. + * + * Parameters: + * context: [in/out] + * The HKDF context to update + * ikm_bits: [in] + * The final bits of the input keying material, in the upper + * portion of the byte. (Use 0b###00000 instead of 0b00000### + * to input the three bits ###.) + + + +Eastlake & Hansen Informational [Page 89] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * ikm_bit_count: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + */ +int hkdfFinalBits(HKDFContext *context, uint8_t ikm_bits, + unsigned int ikm_bit_count) +{ + if (!context) return shaNull; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + return hmacFinalBits(&context->hmacContext, ikm_bits, ikm_bit_count); +} + +/* + * hkdfResult + * + * Description: + * This function will finish the HKDF extraction and perform the + * final HKDF expansion. + * + * Parameters: + * context: [in/out] + * The HKDF context to use to calculate the HKDF hash. + * prk[ ]: [out] + * An optional location to store the HKDF extraction. + * Either NULL, or pointer to a buffer that must be + * larger than USHAHashSize(whichSha); + * info[ ]: [in] + * The optional context and application specific information. + * If info == NULL or a zero-length string, it is ignored. + * info_len: [in] + * The length of the optional context and application specific + * information. (Ignored if info == NULL.) + * okm[ ]: [out] + * Where the HKDF is to be stored. + * okm_len: [in] + * The length of the buffer to hold okm. + * okm_len must be <= 255 * USHABlockSize(whichSha) + * + * Returns: + * sha Error Code. + * + */ +int hkdfResult(HKDFContext *context, + uint8_t prk[USHAMaxHashSize], + const unsigned char *info, int info_len, + + + +Eastlake & Hansen Informational [Page 90] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + uint8_t okm[ ], int okm_len) +{ + uint8_t prkbuf[USHAMaxHashSize]; + int ret; + + if (!context) return shaNull; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + if (!okm) return context->Corrupted = shaBadParam; + if (!prk) prk = prkbuf; + + ret = hmacResult(&context->hmacContext, prk) || + hkdfExpand(context->whichSha, prk, context->hashSize, info, + info_len, okm, okm_len); + context->Computed = 1; + return context->Corrupted = ret; +} + +8.5. The Test Driver + + The following code is a main program test driver to exercise the code + in sha1.c, sha224-256.c, sha384-512.c, hmac.c, and hkdf.c. The test + driver can also be used as a standalone program for generating the + hashes. Note that the tests assume that character values are as in + [US-ASCII] and a run time check warns if the code appears to have + been compiled with some other character system. + + See also [SHAVS]. + +/************************** shatest.c **************************/ +/***************** See RFC 6234 for details. *******************/ +/* Copyright (c) 2011 IETF Trust and the persons identified as */ +/* authors of the code. All rights reserved. */ +/* See sha.h for terms of use and redistribution. */ + +/* + * Description: + * This file will exercise the SHA code performing + * the three tests documented in FIPS PUB 180-3 + * (http://csrc.nist.gov/publications/fips/ + * fips180-2/fips180-2withchangenotice.pdf) + * one that calls SHAInput with an exact multiple of 512 bits + * the seven tests documented for each algorithm in + * "The Secure Hash Algorithm Validation System (SHAVS)" + * (http://csrc.nist.gov/cryptval/shs/SHAVS.pdf), + * three of which are bit-level tests + * + + + + +Eastlake & Hansen Informational [Page 91] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + * These tests have subsequently been moved to pages linked from + * http://csrc.nist.gov/groups/ST/toolkit/examples.html + * + * This file will exercise the HMAC SHA1 code performing + * the seven tests documented in RFCs [RFC 2202] and [RFC 4231]. + * + * This file will exercise the HKDF code performing + * the seven tests documented in RFC 4869. + * + * To run the tests and just see PASSED/FAILED, use the -p option. + * + * Other options exercise: + * hashing an arbitrary string + * hashing a file's contents + * a few error test checks + * printing the results in raw format + * + * Portability Issues: + * None. + * + */ + +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <ctype.h> +#include <unistd.h> /* defines getopt() and optarg */ +#include "sha.h" + +static int scasecmp(const char *s1, const char *s2); + +/* + * Define patterns for testing + */ +#define TEST1 "abc" +#define TEST2_1 \ + "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" +#define TEST2_2a \ + "abcdefghbcdefghicdefghijdefghijkefghijklfghijklmghijklmn" +#define TEST2_2b \ + "hijklmnoijklmnopjklmnopqklmnopqrlmnopqrsmnopqrstnopqrstu" +#define TEST2_2 TEST2_2a TEST2_2b +#define TEST3 "a" /* times 1000000 */ +#define TEST4a "01234567012345670123456701234567" +#define TEST4b "01234567012345670123456701234567" + /* an exact multiple of 512 bits */ +#define TEST4 TEST4a TEST4b /* times 10 */ + + + +Eastlake & Hansen Informational [Page 92] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +#define TEST7_1 \ + "\x49\xb2\xae\xc2\x59\x4b\xbe\x3a\x3b\x11\x75\x42\xd9\x4a\xc8" +#define TEST8_1 \ + "\x9a\x7d\xfd\xf1\xec\xea\xd0\x6e\xd6\x46\xaa\x55\xfe\x75\x71\x46" +#define TEST9_1 \ + "\x65\xf9\x32\x99\x5b\xa4\xce\x2c\xb1\xb4\xa2\xe7\x1a\xe7\x02\x20" \ + "\xaa\xce\xc8\x96\x2d\xd4\x49\x9c\xbd\x7c\x88\x7a\x94\xea\xaa\x10" \ + "\x1e\xa5\xaa\xbc\x52\x9b\x4e\x7e\x43\x66\x5a\x5a\xf2\xcd\x03\xfe" \ + "\x67\x8e\xa6\xa5\x00\x5b\xba\x3b\x08\x22\x04\xc2\x8b\x91\x09\xf4" \ + "\x69\xda\xc9\x2a\xaa\xb3\xaa\x7c\x11\xa1\xb3\x2a" +#define TEST10_1 \ + "\xf7\x8f\x92\x14\x1b\xcd\x17\x0a\xe8\x9b\x4f\xba\x15\xa1\xd5\x9f" \ + "\x3f\xd8\x4d\x22\x3c\x92\x51\xbd\xac\xbb\xae\x61\xd0\x5e\xd1\x15" \ + "\xa0\x6a\x7c\xe1\x17\xb7\xbe\xea\xd2\x44\x21\xde\xd9\xc3\x25\x92" \ + "\xbd\x57\xed\xea\xe3\x9c\x39\xfa\x1f\xe8\x94\x6a\x84\xd0\xcf\x1f" \ + "\x7b\xee\xad\x17\x13\xe2\xe0\x95\x98\x97\x34\x7f\x67\xc8\x0b\x04" \ + "\x00\xc2\x09\x81\x5d\x6b\x10\xa6\x83\x83\x6f\xd5\x56\x2a\x56\xca" \ + "\xb1\xa2\x8e\x81\xb6\x57\x66\x54\x63\x1c\xf1\x65\x66\xb8\x6e\x3b" \ + "\x33\xa1\x08\xb0\x53\x07\xc0\x0a\xff\x14\xa7\x68\xed\x73\x50\x60" \ + "\x6a\x0f\x85\xe6\xa9\x1d\x39\x6f\x5b\x5c\xbe\x57\x7f\x9b\x38\x80" \ + "\x7c\x7d\x52\x3d\x6d\x79\x2f\x6e\xbc\x24\xa4\xec\xf2\xb3\xa4\x27" \ + "\xcd\xbb\xfb" +#define TEST7_224 \ + "\xf0\x70\x06\xf2\x5a\x0b\xea\x68\xcd\x76\xa2\x95\x87\xc2\x8d" +#define TEST8_224 \ + "\x18\x80\x40\x05\xdd\x4f\xbd\x15\x56\x29\x9d\x6f\x9d\x93\xdf\x62" +#define TEST9_224 \ + "\xa2\xbe\x6e\x46\x32\x81\x09\x02\x94\xd9\xce\x94\x82\x65\x69\x42" \ + "\x3a\x3a\x30\x5e\xd5\xe2\x11\x6c\xd4\xa4\xc9\x87\xfc\x06\x57\x00" \ + "\x64\x91\xb1\x49\xcc\xd4\xb5\x11\x30\xac\x62\xb1\x9d\xc2\x48\xc7" \ + "\x44\x54\x3d\x20\xcd\x39\x52\xdc\xed\x1f\x06\xcc\x3b\x18\xb9\x1f" \ + "\x3f\x55\x63\x3e\xcc\x30\x85\xf4\x90\x70\x60\xd2" +#define TEST10_224 \ + "\x55\xb2\x10\x07\x9c\x61\xb5\x3a\xdd\x52\x06\x22\xd1\xac\x97\xd5" \ + "\xcd\xbe\x8c\xb3\x3a\xa0\xae\x34\x45\x17\xbe\xe4\xd7\xba\x09\xab" \ + "\xc8\x53\x3c\x52\x50\x88\x7a\x43\xbe\xbb\xac\x90\x6c\x2e\x18\x37" \ + "\xf2\x6b\x36\xa5\x9a\xe3\xbe\x78\x14\xd5\x06\x89\x6b\x71\x8b\x2a" \ + "\x38\x3e\xcd\xac\x16\xb9\x61\x25\x55\x3f\x41\x6f\xf3\x2c\x66\x74" \ + "\xc7\x45\x99\xa9\x00\x53\x86\xd9\xce\x11\x12\x24\x5f\x48\xee\x47" \ + "\x0d\x39\x6c\x1e\xd6\x3b\x92\x67\x0c\xa5\x6e\xc8\x4d\xee\xa8\x14" \ + "\xb6\x13\x5e\xca\x54\x39\x2b\xde\xdb\x94\x89\xbc\x9b\x87\x5a\x8b" \ + "\xaf\x0d\xc1\xae\x78\x57\x36\x91\x4a\xb7\xda\xa2\x64\xbc\x07\x9d" \ + "\x26\x9f\x2c\x0d\x7e\xdd\xd8\x10\xa4\x26\x14\x5a\x07\x76\xf6\x7c" \ + "\x87\x82\x73" +#define TEST7_256 \ + "\xbe\x27\x46\xc6\xdb\x52\x76\x5f\xdb\x2f\x88\x70\x0f\x9a\x73" +#define TEST8_256 \ + "\xe3\xd7\x25\x70\xdc\xdd\x78\x7c\xe3\x88\x7a\xb2\xcd\x68\x46\x52" + + + +Eastlake & Hansen Informational [Page 93] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +#define TEST9_256 \ + "\x3e\x74\x03\x71\xc8\x10\xc2\xb9\x9f\xc0\x4e\x80\x49\x07\xef\x7c" \ + "\xf2\x6b\xe2\x8b\x57\xcb\x58\xa3\xe2\xf3\xc0\x07\x16\x6e\x49\xc1" \ + "\x2e\x9b\xa3\x4c\x01\x04\x06\x91\x29\xea\x76\x15\x64\x25\x45\x70" \ + "\x3a\x2b\xd9\x01\xe1\x6e\xb0\xe0\x5d\xeb\xa0\x14\xeb\xff\x64\x06" \ + "\xa0\x7d\x54\x36\x4e\xff\x74\x2d\xa7\x79\xb0\xb3" +#define TEST10_256 \ + "\x83\x26\x75\x4e\x22\x77\x37\x2f\x4f\xc1\x2b\x20\x52\x7a\xfe\xf0" \ + "\x4d\x8a\x05\x69\x71\xb1\x1a\xd5\x71\x23\xa7\xc1\x37\x76\x00\x00" \ + "\xd7\xbe\xf6\xf3\xc1\xf7\xa9\x08\x3a\xa3\x9d\x81\x0d\xb3\x10\x77" \ + "\x7d\xab\x8b\x1e\x7f\x02\xb8\x4a\x26\xc7\x73\x32\x5f\x8b\x23\x74" \ + "\xde\x7a\x4b\x5a\x58\xcb\x5c\x5c\xf3\x5b\xce\xe6\xfb\x94\x6e\x5b" \ + "\xd6\x94\xfa\x59\x3a\x8b\xeb\x3f\x9d\x65\x92\xec\xed\xaa\x66\xca" \ + "\x82\xa2\x9d\x0c\x51\xbc\xf9\x33\x62\x30\xe5\xd7\x84\xe4\xc0\xa4" \ + "\x3f\x8d\x79\xa3\x0a\x16\x5c\xba\xbe\x45\x2b\x77\x4b\x9c\x71\x09" \ + "\xa9\x7d\x13\x8f\x12\x92\x28\x96\x6f\x6c\x0a\xdc\x10\x6a\xad\x5a" \ + "\x9f\xdd\x30\x82\x57\x69\xb2\xc6\x71\xaf\x67\x59\xdf\x28\xeb\x39" \ + "\x3d\x54\xd6" +#define TEST7_384 \ + "\x8b\xc5\x00\xc7\x7c\xee\xd9\x87\x9d\xa9\x89\x10\x7c\xe0\xaa" +#define TEST8_384 \ + "\xa4\x1c\x49\x77\x79\xc0\x37\x5f\xf1\x0a\x7f\x4e\x08\x59\x17\x39" +#define TEST9_384 \ + "\x68\xf5\x01\x79\x2d\xea\x97\x96\x76\x70\x22\xd9\x3d\xa7\x16\x79" \ + "\x30\x99\x20\xfa\x10\x12\xae\xa3\x57\xb2\xb1\x33\x1d\x40\xa1\xd0" \ + "\x3c\x41\xc2\x40\xb3\xc9\xa7\x5b\x48\x92\xf4\xc0\x72\x4b\x68\xc8" \ + "\x75\x32\x1a\xb8\xcf\xe5\x02\x3b\xd3\x75\xbc\x0f\x94\xbd\x89\xfe" \ + "\x04\xf2\x97\x10\x5d\x7b\x82\xff\xc0\x02\x1a\xeb\x1c\xcb\x67\x4f" \ + "\x52\x44\xea\x34\x97\xde\x26\xa4\x19\x1c\x5f\x62\xe5\xe9\xa2\xd8" \ + "\x08\x2f\x05\x51\xf4\xa5\x30\x68\x26\xe9\x1c\xc0\x06\xce\x1b\xf6" \ + "\x0f\xf7\x19\xd4\x2f\xa5\x21\xc8\x71\xcd\x23\x94\xd9\x6e\xf4\x46" \ + "\x8f\x21\x96\x6b\x41\xf2\xba\x80\xc2\x6e\x83\xa9" +#define TEST10_384 \ + "\x39\x96\x69\xe2\x8f\x6b\x9c\x6d\xbc\xbb\x69\x12\xec\x10\xff\xcf" \ + "\x74\x79\x03\x49\xb7\xdc\x8f\xbe\x4a\x8e\x7b\x3b\x56\x21\xdb\x0f" \ + "\x3e\x7d\xc8\x7f\x82\x32\x64\xbb\xe4\x0d\x18\x11\xc9\xea\x20\x61" \ + "\xe1\xc8\x4a\xd1\x0a\x23\xfa\xc1\x72\x7e\x72\x02\xfc\x3f\x50\x42" \ + "\xe6\xbf\x58\xcb\xa8\xa2\x74\x6e\x1f\x64\xf9\xb9\xea\x35\x2c\x71" \ + "\x15\x07\x05\x3c\xf4\xe5\x33\x9d\x52\x86\x5f\x25\xcc\x22\xb5\xe8" \ + "\x77\x84\xa1\x2f\xc9\x61\xd6\x6c\xb6\xe8\x95\x73\x19\x9a\x2c\xe6" \ + "\x56\x5c\xbd\xf1\x3d\xca\x40\x38\x32\xcf\xcb\x0e\x8b\x72\x11\xe8" \ + "\x3a\xf3\x2a\x11\xac\x17\x92\x9f\xf1\xc0\x73\xa5\x1c\xc0\x27\xaa" \ + "\xed\xef\xf8\x5a\xad\x7c\x2b\x7c\x5a\x80\x3e\x24\x04\xd9\x6d\x2a" \ + "\x77\x35\x7b\xda\x1a\x6d\xae\xed\x17\x15\x1c\xb9\xbc\x51\x25\xa4" \ + "\x22\xe9\x41\xde\x0c\xa0\xfc\x50\x11\xc2\x3e\xcf\xfe\xfd\xd0\x96" \ + "\x76\x71\x1c\xf3\xdb\x0a\x34\x40\x72\x0e\x16\x15\xc1\xf2\x2f\xbc" \ + "\x3c\x72\x1d\xe5\x21\xe1\xb9\x9b\xa1\xbd\x55\x77\x40\x86\x42\x14" \ + "\x7e\xd0\x96" + + + +Eastlake & Hansen Informational [Page 94] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +#define TEST7_512 \ + "\x08\xec\xb5\x2e\xba\xe1\xf7\x42\x2d\xb6\x2b\xcd\x54\x26\x70" +#define TEST8_512 \ + "\x8d\x4e\x3c\x0e\x38\x89\x19\x14\x91\x81\x6e\x9d\x98\xbf\xf0\xa0" +#define TEST9_512 \ + "\x3a\xdd\xec\x85\x59\x32\x16\xd1\x61\x9a\xa0\x2d\x97\x56\x97\x0b" \ + "\xfc\x70\xac\xe2\x74\x4f\x7c\x6b\x27\x88\x15\x10\x28\xf7\xb6\xa2" \ + "\x55\x0f\xd7\x4a\x7e\x6e\x69\xc2\xc9\xb4\x5f\xc4\x54\x96\x6d\xc3" \ + "\x1d\x2e\x10\xda\x1f\x95\xce\x02\xbe\xb4\xbf\x87\x65\x57\x4c\xbd" \ + "\x6e\x83\x37\xef\x42\x0a\xdc\x98\xc1\x5c\xb6\xd5\xe4\xa0\x24\x1b" \ + "\xa0\x04\x6d\x25\x0e\x51\x02\x31\xca\xc2\x04\x6c\x99\x16\x06\xab" \ + "\x4e\xe4\x14\x5b\xee\x2f\xf4\xbb\x12\x3a\xab\x49\x8d\x9d\x44\x79" \ + "\x4f\x99\xcc\xad\x89\xa9\xa1\x62\x12\x59\xed\xa7\x0a\x5b\x6d\xd4" \ + "\xbd\xd8\x77\x78\xc9\x04\x3b\x93\x84\xf5\x49\x06" +#define TEST10_512 \ + "\xa5\x5f\x20\xc4\x11\xaa\xd1\x32\x80\x7a\x50\x2d\x65\x82\x4e\x31" \ + "\xa2\x30\x54\x32\xaa\x3d\x06\xd3\xe2\x82\xa8\xd8\x4e\x0d\xe1\xde" \ + "\x69\x74\xbf\x49\x54\x69\xfc\x7f\x33\x8f\x80\x54\xd5\x8c\x26\xc4" \ + "\x93\x60\xc3\xe8\x7a\xf5\x65\x23\xac\xf6\xd8\x9d\x03\xe5\x6f\xf2" \ + "\xf8\x68\x00\x2b\xc3\xe4\x31\xed\xc4\x4d\xf2\xf0\x22\x3d\x4b\xb3" \ + "\xb2\x43\x58\x6e\x1a\x7d\x92\x49\x36\x69\x4f\xcb\xba\xf8\x8d\x95" \ + "\x19\xe4\xeb\x50\xa6\x44\xf8\xe4\xf9\x5e\xb0\xea\x95\xbc\x44\x65" \ + "\xc8\x82\x1a\xac\xd2\xfe\x15\xab\x49\x81\x16\x4b\xbb\x6d\xc3\x2f" \ + "\x96\x90\x87\xa1\x45\xb0\xd9\xcc\x9c\x67\xc2\x2b\x76\x32\x99\x41" \ + "\x9c\xc4\x12\x8b\xe9\xa0\x77\xb3\xac\xe6\x34\x06\x4e\x6d\x99\x28" \ + "\x35\x13\xdc\x06\xe7\x51\x5d\x0d\x73\x13\x2e\x9a\x0d\xc6\xd3\xb1" \ + "\xf8\xb2\x46\xf1\xa9\x8a\x3f\xc7\x29\x41\xb1\xe3\xbb\x20\x98\xe8" \ + "\xbf\x16\xf2\x68\xd6\x4f\x0b\x0f\x47\x07\xfe\x1e\xa1\xa1\x79\x1b" \ + "\xa2\xf3\xc0\xc7\x58\xe5\xf5\x51\x86\x3a\x96\xc9\x49\xad\x47\xd7" \ + "\xfb\x40\xd2" +#define SHA1_SEED "\xd0\x56\x9c\xb3\x66\x5a\x8a\x43\xeb\x6e\xa2\x3d" \ + "\x75\xa3\xc4\xd2\x05\x4a\x0d\x7d" +#define SHA224_SEED "\xd0\x56\x9c\xb3\x66\x5a\x8a\x43\xeb\x6e\xa2" \ + "\x3d\x75\xa3\xc4\xd2\x05\x4a\x0d\x7d\x66\xa9\xca\x99\xc9\xce\xb0" \ + "\x27" +#define SHA256_SEED "\xf4\x1e\xce\x26\x13\xe4\x57\x39\x15\x69\x6b" \ + "\x5a\xdc\xd5\x1c\xa3\x28\xbe\x3b\xf5\x66\xa9\xca\x99\xc9\xce\xb0" \ + "\x27\x9c\x1c\xb0\xa7" +#define SHA384_SEED "\x82\x40\xbc\x51\xe4\xec\x7e\xf7\x6d\x18\xe3" \ + "\x52\x04\xa1\x9f\x51\xa5\x21\x3a\x73\xa8\x1d\x6f\x94\x46\x80\xd3" \ + "\x07\x59\x48\xb7\xe4\x63\x80\x4e\xa3\xd2\x6e\x13\xea\x82\x0d\x65" \ + "\xa4\x84\xbe\x74\x53" +#define SHA512_SEED "\x47\x3f\xf1\xb9\xb3\xff\xdf\xa1\x26\x69\x9a" \ + "\xc7\xef\x9e\x8e\x78\x77\x73\x09\x58\x24\xc6\x42\x55\x7c\x13\x99" \ + "\xd9\x8e\x42\x20\x44\x8d\xc3\x5b\x99\xbf\xdd\x44\x77\x95\x43\x92" \ + "\x4c\x1c\xe9\x3b\xc5\x94\x15\x38\x89\x5d\xb9\x88\x26\x1b\x00\x77" \ + "\x4b\x12\x27\x20\x39" + + + + +Eastlake & Hansen Informational [Page 95] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +#define TESTCOUNT 10 +#define HASHCOUNT 5 +#define RANDOMCOUNT 4 +#define HMACTESTCOUNT 7 +#define HKDFTESTCOUNT 7 + +#define PRINTNONE 0 +#define PRINTTEXT 1 +#define PRINTRAW 2 +#define PRINTHEX 3 +#define PRINTBASE64 4 + +#define PRINTPASSFAIL 1 +#define PRINTFAIL 2 + +#define length(x) (sizeof(x)-1) + +/* Test arrays for hashes. */ +struct hash { + const char *name; + SHAversion whichSha; + int hashsize; + struct { + const char *testarray; + int length; + long repeatcount; + int extrabits; + int numberExtrabits; + const char *resultarray; + } tests[TESTCOUNT]; + const char *randomtest; + const char *randomresults[RANDOMCOUNT]; +} hashes[HASHCOUNT] = { + { "SHA1", SHA1, SHA1HashSize, + { + /* 1 */ { TEST1, length(TEST1), 1, 0, 0, + "A9993E364706816ABA3E25717850C26C9CD0D89D" }, + /* 2 */ { TEST2_1, length(TEST2_1), 1, 0, 0, + "84983E441C3BD26EBAAE4AA1F95129E5E54670F1" }, + /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, + "34AA973CD4C4DAA4F61EEB2BDBAD27316534016F" }, + /* 4 */ { TEST4, length(TEST4), 10, 0, 0, + "DEA356A2CDDD90C7A7ECEDC5EBB563934F460452" }, + /* 5 */ { "", 0, 0, 0x98, 5, + "29826B003B906E660EFF4027CE98AF3531AC75BA" }, + /* 6 */ { "\x5e", 1, 1, 0, 0, + "5E6F80A34A9798CAFC6A5DB96CC57BA4C4DB59C2" }, + /* 7 */ { TEST7_1, length(TEST7_1), 1, 0x80, 3, + + + +Eastlake & Hansen Informational [Page 96] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "6239781E03729919C01955B3FFA8ACB60B988340" }, + /* 8 */ { TEST8_1, length(TEST8_1), 1, 0, 0, + "82ABFF6605DBE1C17DEF12A394FA22A82B544A35" }, + /* 9 */ { TEST9_1, length(TEST9_1), 1, 0xE0, 3, + "8C5B2A5DDAE5A97FC7F9D85661C672ADBF7933D4" }, + /* 10 */ { TEST10_1, length(TEST10_1), 1, 0, 0, + "CB0082C8F197D260991BA6A460E76E202BAD27B3" } + }, SHA1_SEED, { "E216836819477C7F78E0D843FE4FF1B6D6C14CD4", + "A2DBC7A5B1C6C0A8BCB7AAA41252A6A7D0690DBC", + "DB1F9050BB863DFEF4CE37186044E2EEB17EE013", + "127FDEDF43D372A51D5747C48FBFFE38EF6CDF7B" + } }, + { "SHA224", SHA224, SHA224HashSize, + { + /* 1 */ { TEST1, length(TEST1), 1, 0, 0, + "23097D223405D8228642A477BDA255B32AADBCE4BDA0B3F7E36C9DA7" }, + /* 2 */ { TEST2_1, length(TEST2_1), 1, 0, 0, + "75388B16512776CC5DBA5DA1FD890150B0C6455CB4F58B1952522525" }, + /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, + "20794655980C91D8BBB4C1EA97618A4BF03F42581948B2EE4EE7AD67" }, + /* 4 */ { TEST4, length(TEST4), 10, 0, 0, + "567F69F168CD7844E65259CE658FE7AADFA25216E68ECA0EB7AB8262" }, + /* 5 */ { "", 0, 0, 0x68, 5, + "E3B048552C3C387BCAB37F6EB06BB79B96A4AEE5FF27F51531A9551C" }, + /* 6 */ { "\x07", 1, 1, 0, 0, + "00ECD5F138422B8AD74C9799FD826C531BAD2FCABC7450BEE2AA8C2A" }, + /* 7 */ { TEST7_224, length(TEST7_224), 1, 0xA0, 3, + "1B01DB6CB4A9E43DED1516BEB3DB0B87B6D1EA43187462C608137150" }, + /* 8 */ { TEST8_224, length(TEST8_224), 1, 0, 0, + "DF90D78AA78821C99B40BA4C966921ACCD8FFB1E98AC388E56191DB1" }, + /* 9 */ { TEST9_224, length(TEST9_224), 1, 0xE0, 3, + "54BEA6EAB8195A2EB0A7906A4B4A876666300EEFBD1F3B8474F9CD57" }, + /* 10 */ { TEST10_224, length(TEST10_224), 1, 0, 0, + "0B31894EC8937AD9B91BDFBCBA294D9ADEFAA18E09305E9F20D5C3A4" } + }, SHA224_SEED, { "100966A5B4FDE0B42E2A6C5953D4D7F41BA7CF79FD" + "2DF431416734BE", "1DCA396B0C417715DEFAAE9641E10A2E99D55A" + "BCB8A00061EB3BE8BD", "1864E627BDB2319973CD5ED7D68DA71D8B" + "F0F983D8D9AB32C34ADB34", "A2406481FC1BCAF24DD08E6752E844" + "709563FB916227FED598EB621F" + } }, + { "SHA256", SHA256, SHA256HashSize, + { + /* 1 */ { TEST1, length(TEST1), 1, 0, 0, "BA7816BF8F01CFEA4141" + "40DE5DAE2223B00361A396177A9CB410FF61F20015AD" }, + /* 2 */ { TEST2_1, length(TEST2_1), 1, 0, 0, "248D6A61D20638B8" + "E5C026930C3E6039A33CE45964FF2167F6ECEDD419DB06C1" }, + /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, "CDC76E5C9914FB92" + "81A1C7E284D73E67F1809A48A497200E046D39CCC7112CD0" }, + + + +Eastlake & Hansen Informational [Page 97] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + /* 4 */ { TEST4, length(TEST4), 10, 0, 0, "594847328451BDFA" + "85056225462CC1D867D877FB388DF0CE35F25AB5562BFBB5" }, + /* 5 */ { "", 0, 0, 0x68, 5, "D6D3E02A31A84A8CAA9718ED6C2057BE" + "09DB45E7823EB5079CE7A573A3760F95" }, + /* 6 */ { "\x19", 1, 1, 0, 0, "68AA2E2EE5DFF96E3355E6C7EE373E3D" + "6A4E17F75F9518D843709C0C9BC3E3D4" }, + /* 7 */ { TEST7_256, length(TEST7_256), 1, 0x60, 3, "77EC1DC8" + "9C821FF2A1279089FA091B35B8CD960BCAF7DE01C6A7680756BEB972" }, + /* 8 */ { TEST8_256, length(TEST8_256), 1, 0, 0, "175EE69B02BA" + "9B58E2B0A5FD13819CEA573F3940A94F825128CF4209BEABB4E8" }, + /* 9 */ { TEST9_256, length(TEST9_256), 1, 0xA0, 3, "3E9AD646" + "8BBBAD2AC3C2CDC292E018BA5FD70B960CF1679777FCE708FDB066E9" }, + /* 10 */ { TEST10_256, length(TEST10_256), 1, 0, 0, "97DBCA7D" + "F46D62C8A422C941DD7E835B8AD3361763F7E9B2D95F4F0DA6E1CCBC" }, + }, SHA256_SEED, { "83D28614D49C3ADC1D6FC05DB5F48037C056F8D2A4CE44" + "EC6457DEA5DD797CD1", "99DBE3127EF2E93DD9322D6A07909EB33B6399" + "5E529B3F954B8581621BB74D39", "8D4BE295BB64661CA3C7EFD129A2F7" + "25B33072DBDDE32385B9A87B9AF88EA76F", "40AF5D3F9716B040DF9408" + "E31536B70FF906EC51B00447CA97D7DD97C12411F4" + } }, + { "SHA384", SHA384, SHA384HashSize, + { + /* 1 */ { TEST1, length(TEST1), 1, 0, 0, + "CB00753F45A35E8BB5A03D699AC65007272C32AB0EDED163" + "1A8B605A43FF5BED8086072BA1E7CC2358BAECA134C825A7" }, + /* 2 */ { TEST2_2, length(TEST2_2), 1, 0, 0, + "09330C33F71147E83D192FC782CD1B4753111B173B3B05D2" + "2FA08086E3B0F712FCC7C71A557E2DB966C3E9FA91746039" }, + /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, + "9D0E1809716474CB086E834E310A4A1CED149E9C00F24852" + "7972CEC5704C2A5B07B8B3DC38ECC4EBAE97DDD87F3D8985" }, + /* 4 */ { TEST4, length(TEST4), 10, 0, 0, + "2FC64A4F500DDB6828F6A3430B8DD72A368EB7F3A8322A70" + "BC84275B9C0B3AB00D27A5CC3C2D224AA6B61A0D79FB4596" }, + /* 5 */ { "", 0, 0, 0x10, 5, + "8D17BE79E32B6718E07D8A603EB84BA0478F7FCFD1BB9399" + "5F7D1149E09143AC1FFCFC56820E469F3878D957A15A3FE4" }, + /* 6 */ { "\xb9", 1, 1, 0, 0, + "BC8089A19007C0B14195F4ECC74094FEC64F01F90929282C" + "2FB392881578208AD466828B1C6C283D2722CF0AD1AB6938" }, + /* 7 */ { TEST7_384, length(TEST7_384), 1, 0xA0, 3, + "D8C43B38E12E7C42A7C9B810299FD6A770BEF30920F17532" + "A898DE62C7A07E4293449C0B5FA70109F0783211CFC4BCE3" }, + /* 8 */ { TEST8_384, length(TEST8_384), 1, 0, 0, + "C9A68443A005812256B8EC76B00516F0DBB74FAB26D66591" + "3F194B6FFB0E91EA9967566B58109CBC675CC208E4C823F7" }, + /* 9 */ { TEST9_384, length(TEST9_384), 1, 0xE0, 3, + "5860E8DE91C21578BB4174D227898A98E0B45C4C760F0095" + + + +Eastlake & Hansen Informational [Page 98] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "49495614DAEDC0775D92D11D9F8CE9B064EEAC8DAFC3A297" }, + /* 10 */ { TEST10_384, length(TEST10_384), 1, 0, 0, + "4F440DB1E6EDD2899FA335F09515AA025EE177A79F4B4AAF" + "38E42B5C4DE660F5DE8FB2A5B2FBD2A3CBFFD20CFF1288C0" } + }, SHA384_SEED, { "CE44D7D63AE0C91482998CF662A51EC80BF6FC68661A3C" + "57F87566112BD635A743EA904DEB7D7A42AC808CABE697F38F", "F9C6D2" + "61881FEE41ACD39E67AA8D0BAD507C7363EB67E2B81F45759F9C0FD7B503" + "DF1A0B9E80BDE7BC333D75B804197D", "D96512D8C9F4A7A4967A366C01" + "C6FD97384225B58343A88264847C18E4EF8AB7AEE4765FFBC3E30BD485D3" + "638A01418F", "0CA76BD0813AF1509E170907A96005938BC985628290B2" + "5FEF73CF6FAD68DDBA0AC8920C94E0541607B0915A7B4457F7" + } }, + { "SHA512", SHA512, SHA512HashSize, + { + /* 1 */ { TEST1, length(TEST1), 1, 0, 0, + "DDAF35A193617ABACC417349AE20413112E6FA4E89A97EA2" + "0A9EEEE64B55D39A2192992A274FC1A836BA3C23A3FEEBBD" + "454D4423643CE80E2A9AC94FA54CA49F" }, + /* 2 */ { TEST2_2, length(TEST2_2), 1, 0, 0, + "8E959B75DAE313DA8CF4F72814FC143F8F7779C6EB9F7FA1" + "7299AEADB6889018501D289E4900F7E4331B99DEC4B5433A" + "C7D329EEB6DD26545E96E55B874BE909" }, + /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, + "E718483D0CE769644E2E42C7BC15B4638E1F98B13B204428" + "5632A803AFA973EBDE0FF244877EA60A4CB0432CE577C31B" + "EB009C5C2C49AA2E4EADB217AD8CC09B" }, + /* 4 */ { TEST4, length(TEST4), 10, 0, 0, + "89D05BA632C699C31231DED4FFC127D5A894DAD412C0E024" + "DB872D1ABD2BA8141A0F85072A9BE1E2AA04CF33C765CB51" + "0813A39CD5A84C4ACAA64D3F3FB7BAE9" }, + /* 5 */ { "", 0, 0, 0xB0, 5, + "D4EE29A9E90985446B913CF1D1376C836F4BE2C1CF3CADA0" + "720A6BF4857D886A7ECB3C4E4C0FA8C7F95214E41DC1B0D2" + "1B22A84CC03BF8CE4845F34DD5BDBAD4" }, + /* 6 */ { "\xD0", 1, 1, 0, 0, + "9992202938E882E73E20F6B69E68A0A7149090423D93C81B" + "AB3F21678D4ACEEEE50E4E8CAFADA4C85A54EA8306826C4A" + "D6E74CECE9631BFA8A549B4AB3FBBA15" }, + /* 7 */ { TEST7_512, length(TEST7_512), 1, 0x80, 3, + "ED8DC78E8B01B69750053DBB7A0A9EDA0FB9E9D292B1ED71" + "5E80A7FE290A4E16664FD913E85854400C5AF05E6DAD316B" + "7359B43E64F8BEC3C1F237119986BBB6" }, + /* 8 */ { TEST8_512, length(TEST8_512), 1, 0, 0, + "CB0B67A4B8712CD73C9AABC0B199E9269B20844AFB75ACBD" + "D1C153C9828924C3DDEDAAFE669C5FDD0BC66F630F677398" + "8213EB1B16F517AD0DE4B2F0C95C90F8" }, + /* 9 */ { TEST9_512, length(TEST9_512), 1, 0x80, 3, + "32BA76FC30EAA0208AEB50FFB5AF1864FDBF17902A4DC0A6" + + + +Eastlake & Hansen Informational [Page 99] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "82C61FCEA6D92B783267B21080301837F59DE79C6B337DB2" + "526F8A0A510E5E53CAFED4355FE7C2F1" }, + /* 10 */ { TEST10_512, length(TEST10_512), 1, 0, 0, + "C665BEFB36DA189D78822D10528CBF3B12B3EEF726039909" + "C1A16A270D48719377966B957A878E720584779A62825C18" + "DA26415E49A7176A894E7510FD1451F5" } + }, SHA512_SEED, { "2FBB1E7E00F746BA514FBC8C421F36792EC0E11FF5EFC3" + "78E1AB0C079AA5F0F66A1E3EDBAEB4F9984BE14437123038A452004A5576" + "8C1FD8EED49E4A21BEDCD0", "25CBE5A4F2C7B1D7EF07011705D50C62C5" + "000594243EAFD1241FC9F3D22B58184AE2FEE38E171CF8129E29459C9BC2" + "EF461AF5708887315F15419D8D17FE7949", "5B8B1F2687555CE2D7182B" + "92E5C3F6C36547DA1C13DBB9EA4F73EA4CBBAF89411527906D35B1B06C1B" + "6A8007D05EC66DF0A406066829EAB618BDE3976515AAFC", "46E36B007D" + "19876CDB0B29AD074FE3C08CDD174D42169D6ABE5A1414B6E79707DF5877" + "6A98091CF431854147BB6D3C66D43BFBC108FD715BDE6AA127C2B0E79F" + } + } +}; + +/* Test arrays for HMAC. */ +struct hmachash { + const char *keyarray[5]; + int keylength[5]; + const char *dataarray[5]; + int datalength[5]; + const char *resultarray[5]; + int resultlength[5]; +} hmachashes[HMACTESTCOUNT] = { + { /* 1 */ { + "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b" + "\x0b\x0b\x0b\x0b\x0b" + }, { 20 }, { + "\x48\x69\x20\x54\x68\x65\x72\x65" /* "Hi There" */ + }, { 8 }, { + /* HMAC-SHA-1 */ + "B617318655057264E28BC0B6FB378C8EF146BE00", + /* HMAC-SHA-224 */ + "896FB1128ABBDF196832107CD49DF33F47B4B1169912BA4F53684B22", + /* HMAC-SHA-256 */ + "B0344C61D8DB38535CA8AFCEAF0BF12B881DC200C9833DA726E9376C2E32" + "CFF7", + /* HMAC-SHA-384 */ + "AFD03944D84895626B0825F4AB46907F15F9DADBE4101EC682AA034C7CEB" + "C59CFAEA9EA9076EDE7F4AF152E8B2FA9CB6", + /* HMAC-SHA-512 */ + "87AA7CDEA5EF619D4FF0B4241A1D6CB02379F4E2CE4EC2787AD0B30545E1" + "7CDEDAA833B7D6B8A702038B274EAEA3F4E4BE9D914EEB61F1702E696C20" + "3A126854" + + + +Eastlake & Hansen Informational [Page 100] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, + SHA384HashSize, SHA512HashSize } + }, + { /* 2 */ { + "\x4a\x65\x66\x65" /* "Jefe" */ + }, { 4 }, { + "\x77\x68\x61\x74\x20\x64\x6f\x20\x79\x61\x20\x77\x61\x6e\x74" + "\x20\x66\x6f\x72\x20\x6e\x6f\x74\x68\x69\x6e\x67\x3f" + /* "what do ya want for nothing?" */ + }, { 28 }, { + /* HMAC-SHA-1 */ + "EFFCDF6AE5EB2FA2D27416D5F184DF9C259A7C79", + /* HMAC-SHA-224 */ + "A30E01098BC6DBBF45690F3A7E9E6D0F8BBEA2A39E6148008FD05E44", + /* HMAC-SHA-256 */ + "5BDCC146BF60754E6A042426089575C75A003F089D2739839DEC58B964EC" + "3843", + /* HMAC-SHA-384 */ + "AF45D2E376484031617F78D2B58A6B1B9C7EF464F5A01B47E42EC3736322" + "445E8E2240CA5E69E2C78B3239ECFAB21649", + /* HMAC-SHA-512 */ + "164B7A7BFCF819E2E395FBE73B56E0A387BD64222E831FD610270CD7EA25" + "05549758BF75C05A994A6D034F65F8F0E6FDCAEAB1A34D4A6B4B636E070A" + "38BCE737" + }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, + SHA384HashSize, SHA512HashSize } + }, + { /* 3 */ + { + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa" + }, { 20 }, { + "\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd" + "\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd" + "\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd" + "\xdd\xdd\xdd\xdd\xdd" + }, { 50 }, { + /* HMAC-SHA-1 */ + "125D7342B9AC11CD91A39AF48AA17B4F63F175D3", + /* HMAC-SHA-224 */ + "7FB3CB3588C6C1F6FFA9694D7D6AD2649365B0C1F65D69D1EC8333EA", + /* HMAC-SHA-256 */ + "773EA91E36800E46854DB8EBD09181A72959098B3EF8C122D9635514CED5" + "65FE", + /* HMAC-SHA-384 */ + "88062608D3E6AD8A0AA2ACE014C8A86F0AA635D947AC9FEBE83EF4E55966" + "144B2A5AB39DC13814B94E3AB6E101A34F27", + /* HMAC-SHA-512 */ + + + +Eastlake & Hansen Informational [Page 101] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "FA73B0089D56A284EFB0F0756C890BE9B1B5DBDD8EE81A3655F83E33B227" + "9D39BF3E848279A722C806B485A47E67C807B946A337BEE8942674278859" + "E13292FB" + }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, + SHA384HashSize, SHA512HashSize } + }, + { /* 4 */ { + "\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" + "\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19" + }, { 25 }, { + "\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd" + "\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd" + "\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd" + "\xcd\xcd\xcd\xcd\xcd" + }, { 50 }, { + /* HMAC-SHA-1 */ + "4C9007F4026250C6BC8414F9BF50C86C2D7235DA", + /* HMAC-SHA-224 */ + "6C11506874013CAC6A2ABC1BB382627CEC6A90D86EFC012DE7AFEC5A", + /* HMAC-SHA-256 */ + "82558A389A443C0EA4CC819899F2083A85F0FAA3E578F8077A2E3FF46729" + "665B", + /* HMAC-SHA-384 */ + "3E8A69B7783C25851933AB6290AF6CA77A9981480850009CC5577C6E1F57" + "3B4E6801DD23C4A7D679CCF8A386C674CFFB", + /* HMAC-SHA-512 */ + "B0BA465637458C6990E5A8C5F61D4AF7E576D97FF94B872DE76F8050361E" + "E3DBA91CA5C11AA25EB4D679275CC5788063A5F19741120C4F2DE2ADEBEB" + "10A298DD" + }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, + SHA384HashSize, SHA512HashSize } + }, + { /* 5 */ { + "\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c" + "\x0c\x0c\x0c\x0c\x0c" + }, { 20 }, { + "Test With Truncation" + }, { 20 }, { + /* HMAC-SHA-1 */ + "4C1A03424B55E07FE7F27BE1", + /* HMAC-SHA-224 */ + "0E2AEA68A90C8D37C988BCDB9FCA6FA8", + /* HMAC-SHA-256 */ + "A3B6167473100EE06E0C796C2955552B", + /* HMAC-SHA-384 */ + "3ABF34C3503B2A23A46EFC619BAEF897", + /* HMAC-SHA-512 */ + "415FAD6271580A531D4179BC891D87A6" + + + +Eastlake & Hansen Informational [Page 102] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + }, { 12, 16, 16, 16, 16 } + }, + { /* 6 */ { + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + }, { 80, 131 }, { + "Test Using Larger Than Block-Size Key - Hash Key First" + }, { 54 }, { + /* HMAC-SHA-1 */ + "AA4AE5E15272D00E95705637CE8A3B55ED402112", + /* HMAC-SHA-224 */ + "95E9A0DB962095ADAEBE9B2D6F0DBCE2D499F112F2D2B7273FA6870E", + /* HMAC-SHA-256 */ + "60E431591EE0B67F0D8A26AACBF5B77F8E0BC6213728C5140546040F0EE3" + "7F54", + /* HMAC-SHA-384 */ + "4ECE084485813E9088D2C63A041BC5B44F9EF1012A2B588F3CD11F05033A" + "C4C60C2EF6AB4030FE8296248DF163F44952", + /* HMAC-SHA-512 */ + "80B24263C7C1A3EBB71493C1DD7BE8B49B46D1F41B4AEEC1121B013783F8" + "F3526B56D037E05F2598BD0FD2215D6A1E5295E64F73F63F0AEC8B915A98" + "5D786598" + }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, + SHA384HashSize, SHA512HashSize } + }, + { /* 7 */ { + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" + }, { 80, 131 }, { + "Test Using Larger Than Block-Size Key and " + "Larger Than One Block-Size Data", + "\x54\x68\x69\x73\x20\x69\x73\x20\x61\x20\x74\x65\x73\x74\x20" + "\x75\x73\x69\x6e\x67\x20\x61\x20\x6c\x61\x72\x67\x65\x72\x20" + "\x74\x68\x61\x6e\x20\x62\x6c\x6f\x63\x6b\x2d\x73\x69\x7a\x65" + + + +Eastlake & Hansen Informational [Page 103] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "\x20\x6b\x65\x79\x20\x61\x6e\x64\x20\x61\x20\x6c\x61\x72\x67" + "\x65\x72\x20\x74\x68\x61\x6e\x20\x62\x6c\x6f\x63\x6b\x2d\x73" + "\x69\x7a\x65\x20\x64\x61\x74\x61\x2e\x20\x54\x68\x65\x20\x6b" + "\x65\x79\x20\x6e\x65\x65\x64\x73\x20\x74\x6f\x20\x62\x65\x20" + "\x68\x61\x73\x68\x65\x64\x20\x62\x65\x66\x6f\x72\x65\x20\x62" + "\x65\x69\x6e\x67\x20\x75\x73\x65\x64\x20\x62\x79\x20\x74\x68" + "\x65\x20\x48\x4d\x41\x43\x20\x61\x6c\x67\x6f\x72\x69\x74\x68" + "\x6d\x2e" + /* "This is a test using a larger than block-size key and a " + "larger than block-size data. The key needs to be hashed " + "before being used by the HMAC algorithm." */ + }, { 73, 152 }, { + /* HMAC-SHA-1 */ + "E8E99D0F45237D786D6BBAA7965C7808BBFF1A91", + /* HMAC-SHA-224 */ + "3A854166AC5D9F023F54D517D0B39DBD946770DB9C2B95C9F6F565D1", + /* HMAC-SHA-256 */ + "9B09FFA71B942FCB27635FBCD5B0E944BFDC63644F0713938A7F51535C3A" + "35E2", + /* HMAC-SHA-384 */ + "6617178E941F020D351E2F254E8FD32C602420FEB0B8FB9ADCCEBB82461E" + "99C5A678CC31E799176D3860E6110C46523E", + /* HMAC-SHA-512 */ + "E37B6A775DC87DBAA4DFA9F96E5E3FFDDEBD71F8867289865DF5A32D20CD" + "C944B6022CAC3C4982B10D5EEB55C3E4DE15134676FB6DE0446065C97440" + "FA8C6A58" + }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, + SHA384HashSize, SHA512HashSize } + } +}; + +/* Test arrays for HKDF. */ +struct hkdfhash { + SHAversion whichSha; + int ikmlength; + const char *ikmarray; + int saltlength; + const char *saltarray; + int infolength; + const char *infoarray; + int prklength; + const char *prkarray; + int okmlength; + const char *okmarray; +} hkdfhashes[HKDFTESTCOUNT] = { + { /* RFC 5869 A.1. Test Case 1 */ + SHA256, + 22, "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b" + + + +Eastlake & Hansen Informational [Page 104] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b", + 13, "\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c", + 10, "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9", + 32, "077709362C2E32DF0DDC3F0DC47BBA6390B6C73BB50F9C3122EC844A" + "D7C2B3E5", + 42, "3CB25F25FAACD57A90434F64D0362F2A2D2D0A90CF1A5A4C5DB02D56" + "ECC4C5BF34007208D5B887185865" + }, + { /* RFC 5869 A.2. Test Case 2 */ + SHA256, + 80, "\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d" + "\x0e\x0f\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b" + "\x1c\x1d\x1e\x1f\x20\x21\x22\x23\x24\x25\x26\x27\x28\x29" + "\x2a\x2b\x2c\x2d\x2e\x2f\x30\x31\x32\x33\x34\x35\x36\x37" + "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f\x40\x41\x42\x43\x44\x45" + "\x46\x47\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f", + 80, "\x60\x61\x62\x63\x64\x65\x66\x67\x68\x69\x6a\x6b\x6c\x6d" + "\x6e\x6f\x70\x71\x72\x73\x74\x75\x76\x77\x78\x79\x7a\x7b" + "\x7c\x7d\x7e\x7f\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89" + "\x8a\x8b\x8c\x8d\x8e\x8f\x90\x91\x92\x93\x94\x95\x96\x97" + "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f\xa0\xa1\xa2\xa3\xa4\xa5" + "\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf", + 80, "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd" + "\xbe\xbf\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb" + "\xcc\xcd\xce\xcf\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9" + "\xda\xdb\xdc\xdd\xde\xdf\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" + "\xe8\xe9\xea\xeb\xec\xed\xee\xef\xf0\xf1\xf2\xf3\xf4\xf5" + "\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff", + 32, "06A6B88C5853361A06104C9CEB35B45C" + "EF760014904671014A193F40C15FC244", + 82, "B11E398DC80327A1C8E7F78C596A4934" + "4F012EDA2D4EFAD8A050CC4C19AFA97C" + "59045A99CAC7827271CB41C65E590E09" + "DA3275600C2F09B8367793A9ACA3DB71" + "CC30C58179EC3E87C14C01D5C1F3434F" + "1D87" + }, + { /* RFC 5869 A.3. Test Case 3 */ + SHA256, + 22, "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b" + "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b", + 0, "", + 0, "", + 32, "19EF24A32C717B167F33A91D6F648BDF" + "96596776AFDB6377AC434C1C293CCB04", + 42, "8DA4E775A563C18F715F802A063C5A31" + "B8A11F5C5EE1879EC3454E5F3C738D2D" + "9D201395FAA4B61A96C8" + + + +Eastlake & Hansen Informational [Page 105] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + }, + { /* RFC 5869 A.4. Test Case 4 */ + SHA1, + 11, "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b", + 13, "\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c", + 10, "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9", + 20, "9B6C18C432A7BF8F0E71C8EB88F4B30BAA2BA243", + 42, "085A01EA1B10F36933068B56EFA5AD81" + "A4F14B822F5B091568A9CDD4F155FDA2" + "C22E422478D305F3F896" + }, + { /* RFC 5869 A.5. Test Case 5 */ + SHA1, + 80, "\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d" + "\x0e\x0f\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b" + "\x1c\x1d\x1e\x1f\x20\x21\x22\x23\x24\x25\x26\x27\x28\x29" + "\x2a\x2b\x2c\x2d\x2e\x2f\x30\x31\x32\x33\x34\x35\x36\x37" + "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f\x40\x41\x42\x43\x44\x45" + "\x46\x47\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f", + 80, "\x60\x61\x62\x63\x64\x65\x66\x67\x68\x69\x6A\x6B\x6C\x6D" + "\x6E\x6F\x70\x71\x72\x73\x74\x75\x76\x77\x78\x79\x7A\x7B" + "\x7C\x7D\x7E\x7F\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89" + "\x8A\x8B\x8C\x8D\x8E\x8F\x90\x91\x92\x93\x94\x95\x96\x97" + "\x98\x99\x9A\x9B\x9C\x9D\x9E\x9F\xA0\xA1\xA2\xA3\xA4\xA5" + "\xA6\xA7\xA8\xA9\xAA\xAB\xAC\xAD\xAE\xAF", + 80, "\xB0\xB1\xB2\xB3\xB4\xB5\xB6\xB7\xB8\xB9\xBA\xBB\xBC\xBD" + "\xBE\xBF\xC0\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xCA\xCB" + "\xCC\xCD\xCE\xCF\xD0\xD1\xD2\xD3\xD4\xD5\xD6\xD7\xD8\xD9" + "\xDA\xDB\xDC\xDD\xDE\xDF\xE0\xE1\xE2\xE3\xE4\xE5\xE6\xE7" + "\xE8\xE9\xEA\xEB\xEC\xED\xEE\xEF\xF0\xF1\xF2\xF3\xF4\xF5" + "\xF6\xF7\xF8\xF9\xFA\xFB\xFC\xFD\xFE\xFF", + 20, "8ADAE09A2A307059478D309B26C4115A224CFAF6", + 82, "0BD770A74D1160F7C9F12CD5912A06EB" + "FF6ADCAE899D92191FE4305673BA2FFE" + "8FA3F1A4E5AD79F3F334B3B202B2173C" + "486EA37CE3D397ED034C7F9DFEB15C5E" + "927336D0441F4C4300E2CFF0D0900B52" + "D3B4" + }, + { /* RFC 5869 A.6. Test Case 6 */ + SHA1, + 22, "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b" + "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b", + 0, "", + 0, "", + 20, "DA8C8A73C7FA77288EC6F5E7C297786AA0D32D01", + 42, "0AC1AF7002B3D761D1E55298DA9D0506" + "B9AE52057220A306E07B6B87E8DF21D0" + + + +Eastlake & Hansen Informational [Page 106] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "EA00033DE03984D34918" + }, + { /* RFC 5869 A.7. Test Case 7. */ + SHA1, + 22, "\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c" + "\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c", + 0, 0, + 0, "", + 20, "2ADCCADA18779E7C2077AD2EB19D3F3E731385DD", + 42, "2C91117204D745F3500D636A62F64F0A" + "B3BAE548AA53D423B0D1F27EBBA6F5E5" + "673A081D70CCE7ACFC48" + } +}; + +/* + * Check the hash value against the expected string, expressed in hex + */ +static const char hexdigits[ ] = "0123456789ABCDEF"; +int checkmatch(const unsigned char *hashvalue, + const char *hexstr, int hashsize) +{ + int i; + for (i = 0; i < hashsize; ++i) { + if (*hexstr++ != hexdigits[(hashvalue[i] >> 4) & 0xF]) + return 0; + if (*hexstr++ != hexdigits[hashvalue[i] & 0xF]) return 0; + } + return 1; +} + +/* + * Print the string, converting non-printable characters to "." + */ +void printstr(const char *str, int len) +{ + for ( ; len-- > 0; str++) + putchar(isprint((unsigned char)*str) ? *str : '.'); +} + +/* + * Print the string, converting all characters to hex "## ". + */ +void printxstr(const char *str, int len) +{ + char *sep = ""; + for ( ; len-- > 0; str++) { + printf("%s%c%c", sep, hexdigits[(*str >> 4) & 0xF], + + + +Eastlake & Hansen Informational [Page 107] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + hexdigits[*str & 0xF]); + sep = " "; + } +} + +/* + * Print a usage message. + */ +void usage(const char *argv0) +{ + fprintf(stderr, + "Usage:\n" + "Common options: [-h hash] [-w|-x|-6] [-H]\n" + "Hash a string:\n" + "\t%s [-S expectedresult] -s hashstr [-k key] " + "[-i info -L okm-len]\n" + "Hash a file:\n" + "\t%s [-S expectedresult] -f file [-k key] " + "[-i info -L okm-len]\n" + "Hash a file, ignoring whitespace:\n" + "\t%s [-S expectedresult] -F file [-k key] " + "[-i info -L okm-len]\n" + "Additional bits to add in: [-B bitcount -b bits]\n" + "(If -k,-i&-L are used, run HKDF-SHA###.\n" + " If -k is used, but not -i&-L, run HMAC-SHA###.\n" + " Otherwise, run SHA###.)\n" + "Standard tests:\n" + "\t%s [-m | -d] [-l loopcount] [-t test#] [-e]\n" + "\t\t[-r randomseed] [-R randomloop-count] " + "[-p] [-P|-X]\n" + "-h\thash to test: " + "0|SHA1, 1|SHA224, 2|SHA256, 3|SHA384, 4|SHA512\n" + "-m\tperform hmac standard tests\n" + "-k\tkey for hmac test\n" + "-d\tperform hkdf standard tests\n" + "-t\ttest case to run, 1-10\n" + "-l\thow many times to run the test\n" + "-e\ttest error returns\n" + "-p\tdo not print results\n" + "-P\tdo not print PASSED/FAILED\n" + "-X\tprint FAILED, but not PASSED\n" + "-r\tseed for random test\n" + "-R\thow many times to run random test\n" + "-s\tstring to hash\n" + "-S\texpected result of hashed string, in hex\n" + "-w\toutput hash in raw format\n" + "-x\toutput hash in hex format\n" + "-6\toutput hash in base64 format\n" + + + +Eastlake & Hansen Informational [Page 108] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "-B\t# extra bits to add in after string or file input\n" + "-b\textra bits to add (high order bits of #, 0# or 0x#)\n" + "-H\tinput hashstr or randomseed is in hex\n" + , argv0, argv0, argv0, argv0); + exit(1); +} + +/* + * Print the results and PASS/FAIL. + */ +void printResult(uint8_t *Message_Digest, int hashsize, + const char *hashname, const char *testtype, const char *testname, + const char *resultarray, int printResults, int printPassFail) +{ + int i, k; + if (printResults == PRINTTEXT) { + printf("\nhashsize=%d\n", hashsize); + putchar('\t'); + for (i = 0; i < hashsize; ++i) { + putchar(hexdigits[(Message_Digest[i] >> 4) & 0xF]); + putchar(hexdigits[Message_Digest[i] & 0xF]); + putchar(' '); + } + putchar('\n'); + } else if (printResults == PRINTRAW) { + fwrite(Message_Digest, 1, hashsize, stdout); + } else if (printResults == PRINTHEX) { + for (i = 0; i < hashsize; ++i) { + putchar(hexdigits[(Message_Digest[i] >> 4) & 0xF]); + putchar(hexdigits[Message_Digest[i] & 0xF]); + } + putchar('\n'); + } else if (printResults == PRINTBASE64) { + unsigned char b; + char *sm = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" + "0123456789+/"; + for (i = 0; i < hashsize; i += 3) { + putchar(sm[Message_Digest[i] >> 2]); + b = (Message_Digest[i] & 0x03) << 4; + if (i+1 < hashsize) b |= Message_Digest[i+1] >> 4; + putchar(sm[b]); + if (i+1 < hashsize) { + b = (Message_Digest[i+1] & 0x0f) << 2; + if (i+2 < hashsize) b |= Message_Digest[i+2] >> 6; + putchar(sm[b]); + } else putchar('='); + if (i+2 < hashsize) putchar(sm[Message_Digest[i+2] & 0x3f]); + else putchar('='); + + + +Eastlake & Hansen Informational [Page 109] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + } + putchar('\n'); + } + + if (printResults && resultarray) { + printf(" Should match:\n\t"); + for (i = 0, k = 0; i < hashsize; i++, k += 2) { + putchar(resultarray[k]); + putchar(resultarray[k+1]); + putchar(' '); + } + putchar('\n'); + } + + if (printPassFail && resultarray) { + int ret = checkmatch(Message_Digest, resultarray, hashsize); + if ((printPassFail == PRINTPASSFAIL) || !ret) + printf("%s %s %s: %s\n", hashname, testtype, testname, + ret ? "PASSED" : "FAILED"); + } +} + +/* + * Exercise a hash series of functions. The input is the testarray, + * repeated repeatcount times, followed by the extrabits. If the + * result is known, it is in resultarray in uppercase hex. + */ +int hash(int testno, int loopno, int hashno, + const char *testarray, int length, long repeatcount, + int numberExtrabits, int extrabits, const unsigned char *keyarray, + int keylen, const unsigned char *info, int infolen, int okmlen, + const char *resultarray, int hashsize, int printResults, + int printPassFail) +{ + USHAContext sha; + HMACContext hmac; + HKDFContext hkdf; + int err, i; + uint8_t Message_Digest_Buf[USHAMaxHashSize]; + uint8_t *Message_Digest = Message_Digest_Buf; + char buf[20]; + + if (printResults == PRINTTEXT) { + printf("\nTest %d: Iteration %d, Repeat %ld\n\t'", testno+1, + loopno, repeatcount); + printstr(testarray, length); + printf("'\n\t'"); + printxstr(testarray, length); + + + +Eastlake & Hansen Informational [Page 110] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + printf("'\n"); + printf(" Length=%d bytes (%d bits), ", length, length * 8); + printf("ExtraBits %d: %2.2x\n", numberExtrabits, extrabits); + } + + if (info) Message_Digest = malloc(okmlen); + memset(&sha, '\343', sizeof(sha)); /* force bad data into struct */ + memset(&hmac, '\343', sizeof(hmac)); + memset(&hkdf, '\343', sizeof(hkdf)); + + err = info ? hkdfReset(&hkdf, hashes[hashno].whichSha, + keyarray, keylen) : + keyarray ? hmacReset(&hmac, hashes[hashno].whichSha, + keyarray, keylen) : + USHAReset(&sha, hashes[hashno].whichSha); + if (err != shaSuccess) { + fprintf(stderr, "hash(): %sReset Error %d.\n", + info ? "hkdf" : keyarray ? "hmac" : "sha", err); + return err; + } + + for (i = 0; i < repeatcount; ++i) { + err = info ? hkdfInput(&hkdf, (const uint8_t *)testarray, length) : + keyarray ? hmacInput(&hmac, (const uint8_t *) testarray, + length) : + USHAInput(&sha, (const uint8_t *) testarray, + length); + if (err != shaSuccess) { + fprintf(stderr, "hash(): %sInput Error %d.\n", + info ? "hkdf" : keyarray ? "hmac" : "sha", err); + return err; + } + } + + if (numberExtrabits > 0) { + err = info ? hkdfFinalBits(&hkdf, extrabits, numberExtrabits) : + keyarray ? hmacFinalBits(&hmac, (uint8_t) extrabits, + numberExtrabits) : + USHAFinalBits(&sha, (uint8_t) extrabits, + numberExtrabits); + if (err != shaSuccess) { + fprintf(stderr, "hash(): %sFinalBits Error %d.\n", + info ? "hkdf" : keyarray ? "hmac" : "sha", err); + return err; + } + } + + err = info ? hkdfResult(&hkdf, 0, info, infolen, + + + +Eastlake & Hansen Informational [Page 111] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + Message_Digest, okmlen) : + keyarray ? hmacResult(&hmac, Message_Digest) : + USHAResult(&sha, Message_Digest); + if (err != shaSuccess) { + fprintf(stderr, "hash(): %s Result Error %d, could not compute " + "message digest.\n", + info ? "hkdf" : keyarray ? "hmac" : "sha", err); + return err; + } + + sprintf(buf, "%d", testno+1); + printResult(Message_Digest, info ? okmlen : hashsize, + hashes[hashno].name, info ? "hkdf standard test" : + keyarray ? "hmac standard test" : "sha standard test", buf, + resultarray, printResults, printPassFail); + + return err; +} + +/* + * Exercise an HKDF series. The input is the testarray, + * repeated repeatcount times, followed by the extrabits. If the + * result is known, it is in resultarray in uppercase hex. + */ +int hashHkdf(int testno, int loopno, int hashno, + int printResults, int printPassFail) +{ + int err; + unsigned char prk[USHAMaxHashSize+1]; + uint8_t okm[255 * USHAMaxHashSize+1]; + char buf[20]; + + if (printResults == PRINTTEXT) { + printf("\nTest %d: Iteration %d\n\tSALT\t'", testno+1, loopno); + printxstr(hkdfhashes[testno].saltarray, + hkdfhashes[testno].saltlength); + printf("'\n\tIKM\t'"); + printxstr(hkdfhashes[testno].ikmarray, + hkdfhashes[testno].ikmlength); + printf("'\n\tINFO\t'"); + printxstr(hkdfhashes[testno].infoarray, + hkdfhashes[testno].infolength); + printf("'\n"); + printf(" L=%d bytes\n", hkdfhashes[testno].okmlength); + } + + /* Run hkdf() against the test vectors */ + err = hkdf(hkdfhashes[testno].whichSha, + + + +Eastlake & Hansen Informational [Page 112] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + (const uint8_t *) hkdfhashes[testno].saltarray, + hkdfhashes[testno].saltlength, + (const uint8_t *) hkdfhashes[testno].ikmarray, + hkdfhashes[testno].ikmlength, + (const uint8_t *) hkdfhashes[testno].infoarray, + hkdfhashes[testno].infolength, okm, + hkdfhashes[testno].okmlength); + if (err != shaSuccess) { + fprintf(stderr, "hashHkdf(): hkdf Error %d.\n", err); + return err; + } + sprintf(buf, "hkdf %d", testno+1); + printResult(okm, hkdfhashes[testno].okmlength, + USHAHashName(hkdfhashes[testno].whichSha), "hkdf standard test", + buf, hkdfhashes[testno].okmarray, printResults, printPassFail); + + /* Now run hkdfExtract() by itself against the test vectors */ + /* to verify the intermediate results. */ + err = hkdfExtract(hkdfhashes[testno].whichSha, + (const uint8_t *) hkdfhashes[testno].saltarray, + hkdfhashes[testno].saltlength, + (const uint8_t *) hkdfhashes[testno].ikmarray, + hkdfhashes[testno].ikmlength, prk); + if (err != shaSuccess) { + fprintf(stderr, "hashHkdf(): hkdfExtract Error %d.\n", err); + return err; + } + sprintf(buf, "hkdfExtract %d", testno+1); + printResult(prk, USHAHashSize(hkdfhashes[testno].whichSha), + USHAHashName(hkdfhashes[testno].whichSha), "hkdf standard test", + buf, hkdfhashes[testno].prkarray, printResults, printPassFail); + + /* Now run hkdfExpand() by itself against the test vectors */ + /* using the intermediate results from hkdfExtract. */ + err = hkdfExpand(hkdfhashes[testno].whichSha, prk, + USHAHashSize(hkdfhashes[testno].whichSha), + (const uint8_t *)hkdfhashes[testno].infoarray, + hkdfhashes[testno].infolength, okm, hkdfhashes[testno].okmlength); + if (err != shaSuccess) { + fprintf(stderr, "hashHkdf(): hkdfExpand Error %d.\n", err); + return err; + } + sprintf(buf, "hkdfExpand %d", testno+1); + printResult(okm, hkdfhashes[testno].okmlength, + USHAHashName(hkdfhashes[testno].whichSha), "hkdf standard test", + buf, hkdfhashes[testno].okmarray, printResults, printPassFail); + + return err; + + + +Eastlake & Hansen Informational [Page 113] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +} + +/* + * Exercise a hash series of functions. The input is a filename. + * If the result is known, it is in resultarray in uppercase hex. + */ +int hashfile(int hashno, const char *hashfilename, int bits, + int bitcount, int skipSpaces, const unsigned char *keyarray, + int keylen, const unsigned char *info, int infolen, int okmlen, + const char *resultarray, int hashsize, + int printResults, int printPassFail) +{ + USHAContext sha; + HMACContext hmac; + HKDFContext hkdf; + int err, nread, c; + unsigned char buf[4096]; + uint8_t Message_Digest_Buf[USHAMaxHashSize]; + uint8_t *Message_Digest = Message_Digest_Buf; + unsigned char cc; + FILE *hashfp = (strcmp(hashfilename, "-") == 0) ? stdin : + fopen(hashfilename, "r"); + + if (!hashfp) { + fprintf(stderr, "cannot open file '%s'\n", hashfilename); + return shaStateError; + } + + if (info) Message_Digest = malloc(okmlen); + memset(&sha, '\343', sizeof(sha)); /* force bad data into struct */ + memset(&hmac, '\343', sizeof(hmac)); + memset(&hkdf, '\343', sizeof(hkdf)); + err = info ? hkdfReset(&hkdf, hashes[hashno].whichSha, + keyarray, keylen) : + keyarray ? hmacReset(&hmac, hashes[hashno].whichSha, + keyarray, keylen) : + USHAReset(&sha, hashes[hashno].whichSha); + if (err != shaSuccess) { + fprintf(stderr, "hashfile(): %sReset Error %d.\n", + info ? "hkdf" : keyarray ? "hmac" : "sha", err); + return err; + } + + if (skipSpaces) + while ((c = getc(hashfp)) != EOF) { + if (!isspace(c)) { + cc = (unsigned char)c; + err = info ? hkdfInput(&hkdf, &cc, 1) : + + + +Eastlake & Hansen Informational [Page 114] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + keyarray ? hmacInput(&hmac, &cc, 1) : + USHAInput(&sha, &cc, 1); + if (err != shaSuccess) { + fprintf(stderr, "hashfile(): %sInput Error %d.\n", + info ? "hkdf" : keyarray ? "hmac" : "sha", err); + if (hashfp != stdin) fclose(hashfp); + return err; + } + } + } + else + while ((nread = fread(buf, 1, sizeof(buf), hashfp)) > 0) { + err = info ? hkdfInput(&hkdf, buf, nread) : + keyarray ? hmacInput(&hmac, buf, nread) : + USHAInput(&sha, buf, nread); + if (err != shaSuccess) { + fprintf(stderr, "hashfile(): %s Error %d.\n", + info ? "hkdf" : keyarray ? "hmacInput" : + "shaInput", err); + if (hashfp != stdin) fclose(hashfp); + return err; + } + } + + if (bitcount > 0) + err = info ? hkdfFinalBits(&hkdf, bits, bitcount) : + keyarray ? hmacFinalBits(&hmac, bits, bitcount) : + USHAFinalBits(&sha, bits, bitcount); + if (err != shaSuccess) { + fprintf(stderr, "hashfile(): %s Error %d.\n", + info ? "hkdf" : keyarray ? "hmacFinalBits" : + "shaFinalBits", err); + if (hashfp != stdin) fclose(hashfp); + return err; + } + + err = info ? hkdfResult(&hkdf, 0, info, infolen, + Message_Digest, okmlen) : + keyarray ? hmacResult(&hmac, Message_Digest) : + USHAResult(&sha, Message_Digest); + if (err != shaSuccess) { + fprintf(stderr, "hashfile(): %s Error %d.\n", + info ? "hkdf" : keyarray ? "hmacResult" : + "shaResult", err); + if (hashfp != stdin) fclose(hashfp); + return err; + } + + + + +Eastlake & Hansen Informational [Page 115] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + printResult(Message_Digest, info ? okmlen : hashsize, + hashes[hashno].name, "file", hashfilename, resultarray, + printResults, printPassFail); + + if (hashfp != stdin) fclose(hashfp); + if (info) free(Message_Digest); + return err; +} + +/* + * Exercise a hash series of functions through multiple permutations. + * The input is an initial seed. That seed is replicated 3 times. + * For 1000 rounds, the previous three results are used as the input. + * This result is then checked, and used to seed the next cycle. + * If the result is known, it is in resultarrays in uppercase hex. + */ +void randomtest(int hashno, const char *seed, int hashsize, + const char **resultarrays, int randomcount, + int printResults, int printPassFail) +{ + int i, j; char buf[20]; + unsigned char SEED[USHAMaxHashSize], MD[1003][USHAMaxHashSize]; + + /* INPUT: Seed - A random seed n bits long */ + memcpy(SEED, seed, hashsize); + if (printResults == PRINTTEXT) { + printf("%s random test seed= '", hashes[hashno].name); + printxstr(seed, hashsize); + printf("'\n"); + } + + for (j = 0; j < randomcount; j++) { + /* MD0 = MD1 = MD2 = Seed; */ + memcpy(MD[0], SEED, hashsize); + memcpy(MD[1], SEED, hashsize); + memcpy(MD[2], SEED, hashsize); + for (i=3; i<1003; i++) { + /* Mi = MDi-3 || MDi-2 || MDi-1; */ + USHAContext Mi; + memset(&Mi, '\343', sizeof(Mi)); /* force bad data into struct */ + USHAReset(&Mi, hashes[hashno].whichSha); + USHAInput(&Mi, MD[i-3], hashsize); + USHAInput(&Mi, MD[i-2], hashsize); + USHAInput(&Mi, MD[i-1], hashsize); + /* MDi = SHA(Mi); */ + USHAResult(&Mi, MD[i]); + } + + + + +Eastlake & Hansen Informational [Page 116] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + /* MDj = Seed = MDi; */ + memcpy(SEED, MD[i-1], hashsize); + + /* OUTPUT: MDj */ + sprintf(buf, "%d", j); + printResult(SEED, hashsize, hashes[hashno].name, "random test", + buf, resultarrays ? resultarrays[j] : 0, printResults, + (j < RANDOMCOUNT) ? printPassFail : 0); + } +} + +/* + * Look up a hash name. + */ +int findhash(const char *argv0, const char *opt) +{ + int i; + const char *names[HASHCOUNT][2] = { + { "0", "sha1" }, { "1", "sha224" }, { "2", "sha256" }, + { "3", "sha384" }, { "4", "sha512" } + }; + for (i = 0; i < HASHCOUNT; i++) + if ((strcmp(opt, names[i][0]) == 0) || + (scasecmp(opt, names[i][1]) == 0)) + return i; + + fprintf(stderr, "%s: Unknown hash name: '%s'\n", argv0, opt); + usage(argv0); + return 0; +} + +/* + * Run some tests that should invoke errors. + */ +void testErrors(int hashnolow, int hashnohigh, int printResults, + int printPassFail) +{ + USHAContext usha; + uint8_t Message_Digest[USHAMaxHashSize]; + int hashno, err; + + for (hashno = hashnolow; hashno <= hashnohigh; hashno++) { + memset(&usha, '\343', sizeof(usha)); /* force bad data */ + USHAReset(&usha, hashno); + USHAResult(&usha, Message_Digest); + err = USHAInput(&usha, (const unsigned char *)"foo", 3); + if (printResults == PRINTTEXT) + printf ("\nError %d. Should be %d.\n", err, shaStateError); + + + +Eastlake & Hansen Informational [Page 117] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + if ((printPassFail == PRINTPASSFAIL) || + ((printPassFail == PRINTFAIL) && (err != shaStateError))) + printf("%s se: %s\n", hashes[hashno].name, + (err == shaStateError) ? "PASSED" : "FAILED"); + + err = USHAFinalBits(&usha, 0x80, 3); + if (printResults == PRINTTEXT) + printf ("\nError %d. Should be %d.\n", err, shaStateError); + if ((printPassFail == PRINTPASSFAIL) || + ((printPassFail == PRINTFAIL) && (err != shaStateError))) + printf("%s se: %s\n", hashes[hashno].name, + (err == shaStateError) ? "PASSED" : "FAILED"); + + err = USHAReset(0, hashes[hashno].whichSha); + if (printResults == PRINTTEXT) + printf("\nError %d. Should be %d.\n", err, shaNull); + if ((printPassFail == PRINTPASSFAIL) || + ((printPassFail == PRINTFAIL) && (err != shaNull))) + printf("%s usha null: %s\n", hashes[hashno].name, + (err == shaNull) ? "PASSED" : "FAILED"); + + switch (hashno) { + case SHA1: err = SHA1Reset(0); break; + case SHA224: err = SHA224Reset(0); break; + case SHA256: err = SHA256Reset(0); break; + case SHA384: err = SHA384Reset(0); break; + case SHA512: err = SHA512Reset(0); break; + } + if (printResults == PRINTTEXT) + printf("\nError %d. Should be %d.\n", err, shaNull); + if ((printPassFail == PRINTPASSFAIL) || + ((printPassFail == PRINTFAIL) && (err != shaNull))) + printf("%s sha null: %s\n", hashes[hashno].name, + (err == shaNull) ? "PASSED" : "FAILED"); + } +} + +/* replace a hex string in place with its value */ +int unhexStr(char *hexstr) +{ + char *o = hexstr; + int len = 0, nibble1 = 0, nibble2 = 0; + if (!hexstr) return 0; + for ( ; *hexstr; hexstr++) { + if (isalpha((int)(unsigned char)(*hexstr))) { + nibble1 = tolower((int)(unsigned char)(*hexstr)) - 'a' + 10; + } else if (isdigit((int)(unsigned char)(*hexstr))) { + nibble1 = *hexstr - '0'; + + + +Eastlake & Hansen Informational [Page 118] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + } else { + printf("\nError: bad hex character '%c'\n", *hexstr); + } + if (!*++hexstr) break; + if (isalpha((int)(unsigned char)(*hexstr))) { + nibble2 = tolower((int)(unsigned char)(*hexstr)) - 'a' + 10; + } else if (isdigit((int)(unsigned char)(*hexstr))) { + nibble2 = *hexstr - '0'; + } else { + printf("\nError: bad hex character '%c'\n", *hexstr); + } + *o++ = (char)((nibble1 << 4) | nibble2); + len++; + } + return len; +} + +int main(int argc, char **argv) +{ + int i, err; + int loopno, loopnohigh = 1; + int hashno, hashnolow = 0, hashnohigh = HASHCOUNT - 1; + int testno, testnolow = 0, testnohigh; + int ntestnohigh = 0; + int printResults = PRINTTEXT; + int printPassFail = 1; + int checkErrors = 0; + char *hashstr = 0; + int hashlen = 0; + const char *resultstr = 0; + char *randomseedstr = 0; + int runHmacTests = 0; + int runHkdfTests = 0; + char *hmacKey = 0; + int hmaclen = 0; + char *info = 0; + int infolen = 0, okmlen = 0; + int randomcount = RANDOMCOUNT; + const char *hashfilename = 0; + const char *hashFilename = 0; + int extrabits = 0, numberExtrabits = 0; + int strIsHex = 0; + + if ('A' != 0x41) { + fprintf(stderr, "%s: these tests require ASCII\n", argv[0]); + } + + while ((i = getopt(argc, argv, + + + +Eastlake & Hansen Informational [Page 119] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + "6b:B:def:F:h:i:Hk:l:L:mpPr:R:s:S:t:wxX")) != -1) + switch (i) { + case 'b': extrabits = strtol(optarg, 0, 0); break; + case 'B': numberExtrabits = atoi(optarg); break; + case 'd': runHkdfTests = 1; break; + case 'e': checkErrors = 1; break; + case 'f': hashfilename = optarg; break; + case 'F': hashFilename = optarg; break; + case 'h': hashnolow = hashnohigh = findhash(argv[0], optarg); + break; + case 'H': strIsHex = 1; break; + case 'i': info = optarg; infolen = strlen(optarg); break; + case 'k': hmacKey = optarg; hmaclen = strlen(optarg); break; + case 'l': loopnohigh = atoi(optarg); break; + case 'L': okmlen = strtol(optarg, 0, 0); break; + case 'm': runHmacTests = 1; break; + case 'P': printPassFail = 0; break; + case 'p': printResults = PRINTNONE; break; + case 'R': randomcount = atoi(optarg); break; + case 'r': randomseedstr = optarg; break; + case 's': hashstr = optarg; hashlen = strlen(hashstr); break; + case 'S': resultstr = optarg; break; + case 't': testnolow = ntestnohigh = atoi(optarg) - 1; break; + case 'w': printResults = PRINTRAW; break; + case 'x': printResults = PRINTHEX; break; + case 'X': printPassFail = 2; break; + case '6': printResults = PRINTBASE64; break; + default: usage(argv[0]); + } + + if (strIsHex) { + hashlen = unhexStr(hashstr); + unhexStr(randomseedstr); + hmaclen = unhexStr(hmacKey); + infolen = unhexStr(info); + } + testnohigh = (ntestnohigh != 0) ? ntestnohigh: + runHmacTests ? (HMACTESTCOUNT-1) : + runHkdfTests ? (HKDFTESTCOUNT-1) : + (TESTCOUNT-1); + if ((testnolow < 0) || + (testnohigh >= (runHmacTests ? HMACTESTCOUNT : TESTCOUNT)) || + (hashnolow < 0) || (hashnohigh >= HASHCOUNT) || + (hashstr && (testnolow == testnohigh)) || + (randomcount < 0) || + (resultstr && (!hashstr && !hashfilename && !hashFilename)) || + ((runHmacTests || hmacKey) && randomseedstr) || + (hashfilename && hashFilename) || + + + +Eastlake & Hansen Informational [Page 120] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + (info && ((infolen <= 0) || (okmlen <= 0))) || + (info && !hmacKey)) + usage(argv[0]); + + /* + * Perform SHA/HMAC tests + */ + for (hashno = hashnolow; hashno <= hashnohigh; ++hashno) { + if (printResults == PRINTTEXT) + printf("Hash %s\n", hashes[hashno].name); + err = shaSuccess; + + for (loopno = 1; (loopno <= loopnohigh) && (err == shaSuccess); + ++loopno) { + if (hashstr) + err = hash(0, loopno, hashno, hashstr, hashlen, 1, + numberExtrabits, extrabits, (const unsigned char *)hmacKey, + hmaclen, (const uint8_t *) info, infolen, okmlen, resultstr, + hashes[hashno].hashsize, printResults, printPassFail); + + else if (randomseedstr) + randomtest(hashno, randomseedstr, hashes[hashno].hashsize, 0, + randomcount, printResults, printPassFail); + + else if (hashfilename) + err = hashfile(hashno, hashfilename, extrabits, + numberExtrabits, 0, + (const unsigned char *)hmacKey, hmaclen, + (const uint8_t *) info, infolen, okmlen, + resultstr, hashes[hashno].hashsize, + printResults, printPassFail); + + else if (hashFilename) + err = hashfile(hashno, hashFilename, extrabits, + numberExtrabits, 1, + (const unsigned char *)hmacKey, hmaclen, + (const uint8_t *) info, infolen, okmlen, + resultstr, hashes[hashno].hashsize, + printResults, printPassFail); + + else /* standard tests */ { + for (testno = testnolow; + (testno <= testnohigh) && (err == shaSuccess); ++testno) { + if (runHmacTests) { + err = hash(testno, loopno, hashno, + hmachashes[testno].dataarray[hashno] ? + hmachashes[testno].dataarray[hashno] : + hmachashes[testno].dataarray[1] ? + + + +Eastlake & Hansen Informational [Page 121] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + hmachashes[testno].dataarray[1] : + hmachashes[testno].dataarray[0], + hmachashes[testno].datalength[hashno] ? + hmachashes[testno].datalength[hashno] : + hmachashes[testno].datalength[1] ? + hmachashes[testno].datalength[1] : + hmachashes[testno].datalength[0], + 1, 0, 0, + (const unsigned char *)( + hmachashes[testno].keyarray[hashno] ? + hmachashes[testno].keyarray[hashno] : + hmachashes[testno].keyarray[1] ? + hmachashes[testno].keyarray[1] : + hmachashes[testno].keyarray[0]), + hmachashes[testno].keylength[hashno] ? + hmachashes[testno].keylength[hashno] : + hmachashes[testno].keylength[1] ? + hmachashes[testno].keylength[1] : + hmachashes[testno].keylength[0], + 0, 0, 0, + hmachashes[testno].resultarray[hashno], + hmachashes[testno].resultlength[hashno], + printResults, printPassFail); + } else if (runHkdfTests) { + err = hashHkdf(testno, loopno, hashno, + printResults, printPassFail); + } else { /* sha tests */ + err = hash(testno, loopno, hashno, + hashes[hashno].tests[testno].testarray, + hashes[hashno].tests[testno].length, + hashes[hashno].tests[testno].repeatcount, + hashes[hashno].tests[testno].numberExtrabits, + hashes[hashno].tests[testno].extrabits, + 0, 0, 0, 0, 0, + hashes[hashno].tests[testno].resultarray, + hashes[hashno].hashsize, + printResults, printPassFail); + } + } + if (!runHmacTests && !runHkdfTests) { + randomtest(hashno, hashes[hashno].randomtest, + hashes[hashno].hashsize, hashes[hashno].randomresults, + RANDOMCOUNT, printResults, printPassFail); + } + } + } + } + + + + +Eastlake & Hansen Informational [Page 122] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + /* Test some error returns */ + if (checkErrors) { + testErrors(hashnolow, hashnohigh, printResults, printPassFail); + } + + return 0; +} + +/* + * Compare two strings, case independently. + * Equivalent to strcasecmp() found on some systems. + */ +int scasecmp(const char *s1, const char *s2) +{ + for (;;) { + char u1 = tolower((int)(unsigned char)(*s1++)); + char u2 = tolower((int)(unsigned char)(*s2++)); + if (u1 != u2) + return u1 - u2; + if (u1 == '\0') + return 0; + } +} + +9. Security Considerations + + This document is intended to provide convenient open source access by + the Internet community to the United States of America Federal + Information Processing Standard Secure Hash Algorithms (SHAs) [FIPS + 180-2], HMACs based thereon, and HKDF. No independent assertion of + the security of these functions by the authors for any particular use + is intended. + + See [RFC6194] for a discussion of SHA-1 Security Considerations. + +10. Acknowledgements + + Thanks for the corrections to [RFC4634] that were provided by Alfred + Hoenes and Jan Andres and to Alfred's comments on the document + hereof. + + Also to the following in alphabetic order, whose comments lead to + improvements in the document: James Carlson, Russ Housley, Tero + Kivinen, Juergen Quittek, and Sean Turner. + + + + + + + +Eastlake & Hansen Informational [Page 123] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +11. References + +11.1. Normative References + + [RFC2104] Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed- + Hashing for Message Authentication", RFC 2104, February + 1997. + + [RFC5869] Krawczyk, H. and P. Eronen, "HMAC-based Extract-and-Expand + Key Derivation Function (HKDF)", RFC 5869, May 2010. + + [SHS] "Secure Hash Standard", United States of American, + National Institute of Science and Technology, Federal + Information Processing Standard (FIPS) 180-3, + http://csrc.nist.gov/publications/fips/fips180-3/ + fips180-3_final.pdf. + + [US-ASCII] ANSI, "USA Standard Code for Information Interchange", + X3.4, American National Standards Institute: New York, + 1968. + +11.2. Informative References + + [RFC3174] Eastlake 3rd, D. and P. Jones, "US Secure Hash Algorithm 1 + (SHA1)", RFC 3174, September 2001. + + [RFC3874] Housley, R., "A 224-bit One-way Hash Function: + SHA-224", RFC 3874, September 2004. + + [RFC4055] Schaad, J., Kaliski, B., and R. Housley, "Additional + Algorithms and Identifiers for RSA Cryptography for use in + the Internet X.509 Public Key Infrastructure Certificate + and Certificate Revocation List (CRL) Profile", RFC 4055, + June 2005. + + [RFC4086] Eastlake 3rd, D., Schiller, J., and S. Crocker, + "Randomness Requirements for Security", BCP 106, RFC 4086, + June 2005. + + [RFC4634] Eastlake 3rd, D. and T. Hansen, "US Secure Hash Algorithms + (SHA and HMAC-SHA)", RFC 4634, July 2006. + + [RFC6194] Polk, T., Chen, L., Turner, S., and P. Hoffman, "Security + Considerations for the SHA-0 and SHA-1 Message-Digest + Algorithms", RFC 6194, March 2011. + + + + + + +Eastlake & Hansen Informational [Page 124] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + + [SHAVS] "The Secure Hash Algorithm Validation System (SHAVS)", + http://csrc.nist.gov/groups/STM/cavp/documents/shs/ + SHAVS.pdf, July 2004. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Eastlake & Hansen Informational [Page 125] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +Appendix: Changes from RFC 4634 + + The following changes were made to RFC 4634 to produce this document: + + 1. Add code for HKDF and brief text about HKDF with pointer to + [RFC5869]. + + 2. Fix numerous errata filed against [RFC4634] as included below. + Note that in no case did the old code return an incorrect hash + value. + + 2.a. Correct some of the error return values which has erroneously + been "shaNull" to the correct "shaInputTooLong" error. + + 2.b. Update comments and variable names within the code for + consistency and clarity and other editorial changes. + + 2.c. The previous code for SHA-384 and SHA-512 would stop after + 2^93 bytes (2^96 bits). The fixed code handles up to 2^125 + bytes (2^128 bits). + + 2.d. Add additional error checking including a run time check in + the test driver to detect attempts to run the test driver + after compilation using some other character set instead of + [US-ASCII]. + + 3. Update boilerplate, remove special license in [RFC4634] as new + boilerplate mandates simplified BSD license. + + 4. Replace MIT version of getopt with new code to satisfy IETF + incoming and outgoing license restrictions. + + 5. Add references to [RFC6194]. + + 6. Other assorted editorial improvements. + + + + + + + + + + + + + + + + +Eastlake & Hansen Informational [Page 126] + +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +Author's Address + + Donald Eastlake + Huawei + 155 Beaver Street + Milford, MA 01757 USA + + Telephone: +1-508-333-2270 + EMail: d3e3e3@gmail.com + + + Tony Hansen + AT&T Laboratories + 200 Laurel Ave. + Middletown, NJ 07748 USA + + Telephone: +1-732-420-8934 + EMail: tony+shs@maillennium.att.com + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Eastlake & Hansen Informational [Page 127] + |