From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc2287.txt | 2467 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2467 insertions(+) create mode 100644 doc/rfc/rfc2287.txt (limited to 'doc/rfc/rfc2287.txt') diff --git a/doc/rfc/rfc2287.txt b/doc/rfc/rfc2287.txt new file mode 100644 index 0000000..d548ff7 --- /dev/null +++ b/doc/rfc/rfc2287.txt @@ -0,0 +1,2467 @@ + + + + + + +Network Working Group C. Krupczak +Request for Comments: 2287 Empire Technologies, Inc. +Category: Standards Track J. Saperia + BGS Systems Inc. + February 1998 + + + Definitions of System-Level Managed Objects for Applications + +Status of this Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (1998). All Rights Reserved. + +Table of Contents + + 1 Abstract .............................................. 2 + 2 The SNMPv2 Network Management Framework ............... 2 + 2.1 Object Definitions .................................. 2 + 3 Overview .............................................. 3 + 4 Architecture for Application Management ............... 3 + 5 The Structure of the MIB .............................. 4 + 5.1 System Application Installed Group .................. 5 + 5.2 System Application Run Group ........................ 5 + 5.2.1 sysApplRunTable and sysApplPastRunTable ........... 5 + 5.2.2 sysApplElmtRunTable and sysApplElmtPastRunTable + .................................................... 6 + 5.3 System Application Map Group ........................ 7 + 6 Definitions ........................................... 7 + 7 Implementation Issues ................................. 40 + 7.1 Implementation with Polling Agents .................. 40 + 7.2 sysApplElmtPastRunTable Entry Collisions ............ 40 + 8 Security Considerations ............................... 41 + 9 Acknowledgements ...................................... 42 + 10 Author's Address ..................................... 42 + 11 References ........................................... 42 + 12 Full Copyright Statement ............................. 44 + + + + + + + +Krupczak & Saperia Standards Track [Page 1] + +RFC 2287 MIB for Applications February 1998 + + +1. Abstract + + This memo defines a portion of the Management Information Base (MIB) + for use with network management protocols in the Internet community. + In particular, it describes a basic set of managed objects for fault, + configuration and performance management of applications from a + systems perspective. More specifically, the managed objects are + restricted to information that can be determined from the system + itself and which does not require special instrumentation within the + applications to make the information available. + + This memo does not specify a standard for the Internet community. + +2. The SNMPv2 Network Management Framework + + The SNMPv2 Network Management Framework consists of the following + major components: + + o RFC 1902 Structure of Management Information for Version + 2 of the Simple Network Management Protocol (SNMPv2) [2] + + o RFC 1903 Textual Conventions for Version 2 of the Simple + Network Management Protocol (SNMPv2) [3] + + o RFC 1904 Conformance Statements for Version 2 of the + Simple Network Management Protocol (SNMPv2) [4] + + o RFC 1905 Protocol Operations for Version 2 of the Simple + Network Management Protocol (SNMPv2) [5] + + o RFC 1906 Transport Mappings for Version 2 of the Simple + Network Management Protocol (SNMPv2) [6] + + o RFC 1907 Management Information Base for Version 2 of the + Simple Network Management Protocol (SNMPv2) [7] + + o RFC 1908 Coexistence between Version 1 and Version 2 of + the Internet-standard Network Management Framework [8] + + The Framework permits new objects to be defined for the purpose of + experimentation and evaluation. + +2.1. Object Definitions + + Managed objects are accessed via a virtual information store, termed + the Management Information Base or MIB. Objects in the MIB are + defined using the subset of Abstract Syntax Notation One (ASN.1) [1], + defined in the Structure of Management Information (SMI) (See RFC + + + +Krupczak & Saperia Standards Track [Page 2] + +RFC 2287 MIB for Applications February 1998 + + + 1902 [2]). In particular, each object type is named by an OBJECT + IDENTIFIER, an administratively assigned name. The object type + together with an object instance serves to uniquely identify a + specific instantiation of the object. For human convenience, we often + use a textual string, termed the object descriptor, to refer to the + object type. + +3. Overview + + The primary purpose of computing technologies is the execution of + application software. These applications, typically specialized + collections of executables, files, and interprocess communications, + exist to solve business, scientific or other "problems". The + configuration, fault detection, performance monitoring and control of + application software across its life on a host computer is of great + economic importance. For the purposes of our work, we define + applications as one or more units of executable code and other + resources, installed on a single host system that a manager may think + of as a single object for management purposes. + + The information described by the objects in the System Application + MIB support configuration, fault, and performance management; they + represent some of the basic attributes of application software from a + systems (non-application specific) perspective. The information + allows for the description of applications as collections of + executables and files installed and executing on a host computer. + + This memo is concerned primarily with, and defines a model for, + application information resident on a host computer which can be + determined from the system itself, and not from the individual + applications. This system-level view of applications is designed to + provide information about software applications installed and running + on the host system without requiring modifications and code additions + to the applications themselves. This approach was taken to insure + ease and speed of implementation, while allowing room for future + growth. + +4. Architecture for Application Management + + In the area of application management it is fully acknowledged and + even expected that additional MIB modules will be defined over time + to provide an even greater level of detail regarding applications. + This MIB module presents the most general case: a set of management + objects for providing generic information about applications and + whose object values can be determined from the computer system itself + without requiring instrumentation within the application. + + + + + +Krupczak & Saperia Standards Track [Page 3] + +RFC 2287 MIB for Applications February 1998 + + + A finer-grained level of detail is planned for the future "appl MIB" + which will be a common set of management objects relating to generic + applications, but which require some type of instrumentation in the + application in order to be determined. Since the applmib MIB module + will provide a finer level of detail, any connection to the sysAppl + MIB should be made by having references from the more detailed appl + MIB back to the more generic sysAppl MIB. Likewise, as application- + specific MIB modules such as the WWW MIB, etc., are developed over + time, these more specific MIBs should reference back to the more + generic MIBs. + + While this MIB module does not attempt to provide every detailed + piece of information for managing applications, it does provide a + basic systems-level view of the applications and their components on + a single host system. + +5. The Structure of the MIB + + The System Application MIB structure models application packages as a + whole, and also models the individual elements (files and + executables) which collectively form an application. The MIB is + structured to model information regarding installed application + packages and the elements which make up each application package. The + MIB also models activity information on applications (and in turn, + their components) that are running or have previously run on the host + system. In modeling applications and their elements, this MIB module + provides the necessary link for associating executing processes with + the applications of which they are a part. + + The objects are arranged into the following groups: + + - System Application Installed Group + - sysApplInstallPkgTable + - sysApplInstallElmtTable + + - System Application Run Group + - sysApplRunTable + - sysApplPastRunTable + - sysApplElmtRunTable + - sysApplElmtPastRunTable + - (scalars for restricting table sizes) + + - System Application Map Group + - sysApplMapTable + + + + + + + +Krupczak & Saperia Standards Track [Page 4] + +RFC 2287 MIB for Applications February 1998 + + + As can be seen by the arrangement above, for each category, the MIB + first treats an application package as a whole, and then breaks down + the package to provide information about each of the elements + (executable and non-executable files) of the package. + +5.1. System Application Installed Group + + The System Application Installed group consists of two tables. + Through these two tables, administrators will be able to determine + which applications have been installed on a system and what their + constituent components are. The first table, the + sysApplInstallPkgTable, lists the application packages installed on a + particular host. The second, the sysApplInstallElmtTable, provides + information regarding the executables and non-executable files, or + elements, which collectively compose an application. + + NOTE: This MIB is intended to work with applications that have been + installed on a particular host, where "installed" means that the + existence of the application and the association between an + application and its component files can be discovered without + requiring additional instrumentation of the application itself. This + may require that certain conventions be used, such as using a central + software installation mechanism or registry, when installing + application packages. For example, many UNIX systems utilize a + "pkgadd" utility to track installed application packages, while many + PC systems utilize a global registry. + +5.2. System Application Run Group + + This group models activity information for applications that have + been invoked and are either currently running, or have previously + run, on the host system. Likewise, the individual elements of an + invoked application are also modeled to show currently running + processes, and processes that have run in the past. This information + is modeled using two pairs of tables: a pair of tables for currently + running applications and past run applications, and a pair of tables + for the currently running elements and the past run elements. Seven + scalars are also defined to control the size of the past run tables. + +5.2.1. sysApplRunTable and sysApplPastRunTable + + The sysApplRunTable and the sysApplPastRunTable make up the first + pair of tables. The sysApplRunTable contains the application + instances which are currently running on the host. Each time an + application is invoked, a new entry is created in the sysApplRunTable + to provide information about that particular invocation of the + application. An entry will remain in this table until the + + + + +Krupczak & Saperia Standards Track [Page 5] + +RFC 2287 MIB for Applications February 1998 + + + application instance terminates, at which time the entry will be + deleted from the sysApplRunTable and placed in the + sysApplPastRunTable. + + The sysApplPastRunTable maintains a history of instances of + applications which have previously executed on the host. Entries to + this table are made when an invoked application from the + sysApplRunTable terminates; the table entry which represents the + application instance is removed from the SysApplRunTable and a + corresponding entry is added to the sysApplPastRunTable. + + Because the sysApplPastRunTable will continuously grow as + applications are executed and terminate, two scalars are defined to + control the aging-out of table entries. The value of + sysApplPastRunMaxRows specifies the maximum number of entries the + table may contain, while the sysApplPastRunTblTimeLimit specifies the + maximum age of the table entries. Oldest entries are removed first. + + It is important to note that the sysApplRunTable and + sysApplPastRunTable contain entries for each INVOCATION of an + application. A single application package might be invoked multiple + times; each invocation is properly recorded by a separate entry in + the sysApplRunTable. + + In order to implement this group, the agent must be able to recognize + that an application has been invoked, and be able to determine when + that invocation terminates. This poses a complex problem since a + single application invocation may involve numerous processes, some of + which may be required to remain running throughout the duration of + the application, others which might come and go. The + sysApplInstallElmtRole columnar object in the sysApplInstallElmtTable + is meant to assist in this task by indicating which element is the + application's primary executable, which elements must be running in + order for the application to be running, which elements are dependent + on required elements, etc. See the description of + sysApplInstallElmtRole for more details. + +5.2.2. sysApplElmtRunTable and sysApplElmtPastRunTable + + While the sysApplRunTable and sysApplPastRunTable focus on + applications as a whole, the sysApplElmtRunTable and + sysApplElmtPastRunTable provide information regarding an + application's executable elements, (processes), which are either + currently executing or have executed in the past. + + The sysApplElmtRunTable contains an entry for every process currently + running on the host. An entry is created in this table for each + process at the time it is started, and will remain in the table until + + + +Krupczak & Saperia Standards Track [Page 6] + +RFC 2287 MIB for Applications February 1998 + + + the process terminates. Note that in order to provide complete + information on the load on the system, this table lists EVERY running + process, not just those processes that are running as part of an + identified application. However, when processes terminate, only + information from entries corresponding to elements of an identified + application are moved to the sysApplElmtPastRunTable. + + The sysApplElmtPastRunTable maintains a history of processes which + have previously executed on the host as part of an application. When + a process from the sysApplElmtRunTable terminates, the entry's + information is moved to this sysApplElmtPastRunTable provided that + the process was part of an identified application. If the process + cannot be associated with any 'parent' application, then it is simply + removed from the sysApplElmtRunTable. This allows for processes like + 'ps' or 'grep' to show up in the sysApplElmtRunTable, (where they are + consuming resources and are thus "interesting"), but not in the + sysApplElmtPastRunTable. + + Because the sysApplElmtPastRunTable will continuously grow as + processes are executed and terminate, two scalars are defined to + control the aging-out of table entries. The value of + sysApplElmtPastRunMaxRows specifies the maximum number of entries the + table may contain, while the sysApplElmtPastRunTblTimeLimit specifies + the maximum age of the table entries. Oldest entries are removed + first. + +5.3. System Application Map Group + + The System Application Map group contains a single table, the + sysApplMapTable, whose sole purpose is to provide a backwards mapping + for determining the invoked application, installed element, and + installed application package given a known process identification + number. + +6. Definitions + + SYSAPPL-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Unsigned32, TimeTicks, Counter32, Gauge32 + FROM SNMPv2-SMI + DateAndTime, TEXTUAL-CONVENTION + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + mib-2 FROM SNMPv2-SMI; + + + + +Krupczak & Saperia Standards Track [Page 7] + +RFC 2287 MIB for Applications February 1998 + + + -- System Application MIB + + sysApplMIB MODULE-IDENTITY + LAST-UPDATED "9710200000Z" + ORGANIZATION "IETF Applications MIB Working Group" + CONTACT-INFO + "Cheryl Krupczak (Editor, WG Advisor) + Postal: Empire Technologies, Inc. + 541 Tenth Street NW + Suite 169 + Atlanta, GA 30318 + USA + Phone: (770) 384-0184 + Email: cheryl@empiretech.com + + Jon Saperia (WG Chair) + Postal: BGS Systems, Inc. + One First Avenue + Waltham, MA 02254-9111 + USA + Phone: (617) 891-0000 + Email: saperia@networks.bgs.com" + DESCRIPTION + "The MIB module defines management objects that model + applications as collections of executables and files + installed and executing on a host system. The MIB + presents a system-level view of applications; i.e., + objects in this MIB are limited to those attributes + that can typically be obtained from the system itself + without adding special instrumentation to the applications." + ::= { mib-2 54 } + + + sysApplOBJ OBJECT IDENTIFIER ::= { sysApplMIB 1 } + sysApplInstalled OBJECT IDENTIFIER ::= { sysApplOBJ 1 } + sysApplRun OBJECT IDENTIFIER ::= { sysApplOBJ 2 } + sysApplMap OBJECT IDENTIFIER ::= { sysApplOBJ 3 } + sysApplNotifications OBJECT IDENTIFIER ::= { sysApplMIB 2 } + sysApplConformance OBJECT IDENTIFIER ::= { sysApplMIB 3 } + + -- Textual Conventions + + RunState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This TC describes the current execution state of + a running application or process. The possible + values are: + + + +Krupczak & Saperia Standards Track [Page 8] + +RFC 2287 MIB for Applications February 1998 + + + running(1), + runnable(2), - waiting for a resource (CPU, etc.) + waiting(3), - waiting for an event + exiting(4), + other(5) - other invalid state" + SYNTAX INTEGER { + running (1), + runnable (2), -- waiting for resource (CPU, etc.) + waiting (3), -- waiting for event + exiting (4), + other (5) -- other invalid state + } + + LongUtf8String ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1024a" + STATUS current + DESCRIPTION + "To facilitate internationalization, this TC + represents information taken from the ISO/IEC IS + 10646-1 character set, encoded as an octet string + using the UTF-8 character encoding scheme described + in RFC 2044 [10]. For strings in 7-bit US-ASCII, + there is no impact since the UTF-8 representation + is identical to the US-ASCII encoding." + SYNTAX OCTET STRING (SIZE (0..1024)) + + Utf8String ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "To facilitate internationalization, this TC + represents information taken from the ISO/IEC IS + 10646-1 character set, encoded as an octet string + using the UTF-8 character encoding scheme described + in RFC 2044 [10]. For strings in 7-bit US-ASCII, + there is no impact since the UTF-8 representation + is identical to the US-ASCII encoding." + SYNTAX OCTET STRING (SIZE (0..255)) + + + + -- sysApplInstalled Group + -- This group provides information about application packages + -- that have been installed on the host computer. The group + -- contains two tables. The first, the sysApplInstallPkgTable, + -- describes the application packages, the second, the + -- sysApplInstallElmtTable, describes the constituent elements + -- (files and executables) which compose an application package. + + + +Krupczak & Saperia Standards Track [Page 9] + +RFC 2287 MIB for Applications February 1998 + + + -- + -- In order to appear in this group, an application and its + -- component files must be discoverable by the system itself, + -- possibly through some type of software installation mechanism + -- or registry. + + -- sysApplInstallPkgTable + -- The system installed application packages table provides + -- information on the software packages installed on a system. + -- These packages may consist of many different files including + -- executable and non-executable files. + + sysApplInstallPkgTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysApplInstallPkgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table listing the software application packages + installed on a host computer. In order to appear in + this table, it may be necessary for the application + to be installed using some type of software + installation mechanism or global registry so that its + existence can be detected by the agent implementation." + + ::= { sysApplInstalled 1 } + + sysApplInstallPkgEntry OBJECT-TYPE + SYNTAX SysApplInstallPkgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The logical row describing an installed application + package." + INDEX { sysApplInstallPkgIndex } + ::= { sysApplInstallPkgTable 1 } + + SysApplInstallPkgEntry ::= SEQUENCE { + sysApplInstallPkgIndex Unsigned32, + sysApplInstallPkgManufacturer Utf8String, + sysApplInstallPkgProductName Utf8String, + sysApplInstallPkgVersion Utf8String, + sysApplInstallPkgSerialNumber Utf8String, + sysApplInstallPkgDate DateAndTime, + sysApplInstallPkgLocation LongUtf8String + } + + sysApplInstallPkgIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + + + +Krupczak & Saperia Standards Track [Page 10] + +RFC 2287 MIB for Applications February 1998 + + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An integer used only for indexing purposes. + Generally monotonically increasing from 1 as new + applications are installed. + + The value for each installed application must + remain constant at least from one re-initialization of + the network management entity which implements this + MIB module to the next re-initialization. + + The specific value is meaningful only within a given SNMP + entity. A sysApplInstallPkgIndex value must not be re-used + until the next agent entity restart in the event the + installed application entry is deleted." + ::= { sysApplInstallPkgEntry 1 } + + sysApplInstallPkgManufacturer OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Manufacturer of the software application package." + ::= { sysApplInstallPkgEntry 2 } + + sysApplInstallPkgProductName OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name assigned to the software application package + by the Manufacturer." + ::= { sysApplInstallPkgEntry 3 } + + sysApplInstallPkgVersion OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number assigned to the application package + by the manufacturer of the software." + ::= { sysApplInstallPkgEntry 4 } + + sysApplInstallPkgSerialNumber OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + + + +Krupczak & Saperia Standards Track [Page 11] + +RFC 2287 MIB for Applications February 1998 + + + DESCRIPTION + "The serial number of the software assigned by the + manufacturer." + ::= { sysApplInstallPkgEntry 5 } + + sysApplInstallPkgDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time this software application was installed + on the host." + ::= { sysApplInstallPkgEntry 6 } + + sysApplInstallPkgLocation OBJECT-TYPE + SYNTAX LongUtf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The complete path name where the application package + is installed. For example, the value would be + '/opt/MyapplDir' if the application package was installed + in the /opt/MyapplDir directory." + ::= { sysApplInstallPkgEntry 7 } + + + -- sysApplInstallElmtTable + -- The table describing the individual application package + -- elements (files and executables) installed on the host computer. + + sysApplInstallElmtTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysApplInstallElmtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table details the individual application package + elements (files and executables) which comprise the + applications defined in the sysApplInstallPkg Table. + Each entry in this table has an index to the + sysApplInstallPkg table to identify the application + package of which it is a part. As a result, there may + be many entries in this table for each instance in the + sysApplInstallPkg Table. + + Table entries are indexed by sysApplInstallPkgIndex, + sysApplInstallElmtIndex to facilitate retrieval of + all elements associated with a particular installed + application package." + + + +Krupczak & Saperia Standards Track [Page 12] + +RFC 2287 MIB for Applications February 1998 + + + ::= { sysApplInstalled 2 } + + sysApplInstallElmtEntry OBJECT-TYPE + SYNTAX SysApplInstallElmtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The logical row describing an element of an installed + application. The element may be an executable or + non-executable file." + INDEX {sysApplInstallPkgIndex, sysApplInstallElmtIndex} + ::= { sysApplInstallElmtTable 1 } + + SysApplInstallElmtEntry ::= SEQUENCE { + sysApplInstallElmtIndex Unsigned32, + sysApplInstallElmtName Utf8String, + sysApplInstallElmtType INTEGER, + sysApplInstallElmtDate DateAndTime, + sysApplInstallElmtPath LongUtf8String, + sysApplInstallElmtSizeHigh Unsigned32, + sysApplInstallElmtSizeLow Unsigned32, + sysApplInstallElmtRole BITS, + sysApplInstallElmtModifyDate DateAndTime, + sysApplInstallElmtCurSizeHigh Unsigned32, + sysApplInstallElmtCurSizeLow Unsigned32 + + } + + sysApplInstallElmtIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer used for indexing. The value + of this index is unique among all rows in this table + that exist or have existed since the last agent restart." + ::= { sysApplInstallElmtEntry 1 } + + + sysApplInstallElmtName OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of this element which is contained in the + application." + ::= { sysApplInstallElmtEntry 2 } + + + + +Krupczak & Saperia Standards Track [Page 13] + +RFC 2287 MIB for Applications February 1998 + + + sysApplInstallElmtType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + nonexecutable(2), + operatingSystem(3), -- executable + deviceDriver(4), -- executable + application(5) -- executable + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of element that is part of the installed + application." + ::= { sysApplInstallElmtEntry 3 } + + sysApplInstallElmtDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time that this component was installed on + the system." + ::= { sysApplInstallElmtEntry 4 } + + sysApplInstallElmtPath OBJECT-TYPE + SYNTAX LongUtf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The full directory path where this element is installed. + For example, the value would be '/opt/EMPuma/bin' for an + element installed in the directory '/opt/EMPuma/bin'. + Most application packages include information about the + elements contained in the package. In addition, elements + are typically installed in sub-directories under the + package installation directory. In cases where the + element path names are not included in the package + information itself, the path can usually be determined + by a simple search of the sub-directories. If the + element is not installed in that location and there is + no other information available to the agent implementation, + then the path is unknown and null is returned." + ::= { sysApplInstallElmtEntry 5} + + sysApplInstallElmtSizeHigh OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + + + +Krupczak & Saperia Standards Track [Page 14] + +RFC 2287 MIB for Applications February 1998 + + + DESCRIPTION + "The installed file size in 2^32 byte blocks. This is + the size of the file on disk immediately after installation. + + For example, for a file with a total size of 4,294,967,296 + bytes, this variable would have a value of 1; for a file + with a total size of 4,294,967,295 bytes this variable + would be 0." + ::= { sysApplInstallElmtEntry 6 } + + sysApplInstallElmtSizeLow OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The installed file size modulo 2^32 bytes. This is + the size of the file on disk immediately after installation. + + For example, for a file with a total size of 4,294,967,296 + bytes this variable would have a value of 0; for a file with + a total size of 4,294,967,295 bytes this variable would be + 4,294,967,295." + ::= { sysApplInstallElmtEntry 7 } + + sysApplInstallElmtRole OBJECT-TYPE + SYNTAX BITS { + executable(0), + -- An application may have one or + -- more executable elements. The rest of the + -- bits have no meaning if the element is not + -- executable. + exclusive(1), + -- Only one copy of an exclusive element may be + -- running per invocation of the running + -- application. + primary(2), + -- The primary executable. An application can + -- have one, and only one element that is designated + -- as the primary executable. The execution of + -- this element constitutes an invocation of + -- the application. This is used by the agent + -- implementation to determine the initiation of + -- an application. The primary executable must + -- remain running long enough for the agent + -- implementation to detect its presence. + required(3), + -- An application may have zero or more required + -- elements. All required elements must be running + + + +Krupczak & Saperia Standards Track [Page 15] + +RFC 2287 MIB for Applications February 1998 + + + -- in order for the application to be judged to be + -- running and healthy. + dependent(4), + -- An application may have zero or more + -- dependent elements. Dependent elements may + -- not be running unless required elements are. + unknown(5) + -- Default value for the case when an operator + -- has not yet assigned one of the other values. + -- When set, bits 1, 2, 3, and 4 have no meaning. + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An operator assigned value used in the determination of + application status. This value is used by the agent to + determine both the mapping of started processes to the + initiation of an application, as well as to allow for a + determination of application health. The default value, + unknown(5), is used when an operator has not yet assigned + one of the other values. If unknown(5) is set, bits + 1 - 4 have no meaning. The possible values are: + + executable(0), + An application may have one or + more executable elements. The rest of the + bits have no meaning if the element is not + executable. + exclusive(1), + Only one copy of an exclusive element may be + running per invocation of the running + application. + primary(2), + The primary executable. An application can + have one, and only one element that is designated + as the primary executable. The execution of + this element constitutes an invocation of + the application. This is used by the agent + implementation to determine the initiation of + an application. The primary executable must + remain running long enough for the agent + implementation to detect its presence. + required(3), + An application may have zero or more required + elements. All required elements must be running + in order for the application to be judged to be + running and healthy. + dependent(4), + + + +Krupczak & Saperia Standards Track [Page 16] + +RFC 2287 MIB for Applications February 1998 + + + An application may have zero or more + dependent elements. Dependent elements may + not be running unless required elements are. + unknown(5) + Default value for the case when an operator + has not yet assigned one of the other values. + When set, bits 1, 2, 3, and 4 have no meaning. + + sysApplInstallElmtRole is used by the agent implementation + in determining the initiation of an application, the + current state of a running application (see + sysApplRunCurrentState), when an application invocation is + no longer running, and the exit status of a terminated + application invocation (see sysApplPastRunExitState)." + + DEFVAL { { unknown } } + ::= { sysApplInstallElmtEntry 8 } + + sysApplInstallElmtModifyDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time that this element was last modified. + Modification of the sysApplInstallElmtRole columnar + object does NOT constitute a modification of the element + itself and should not affect the value of this object." + ::= { sysApplInstallElmtEntry 9 } + + sysApplInstallElmtCurSizeHigh OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current file size in 2^32 byte blocks. + For example, for a file with a total size of 4,294,967,296 + bytes, this variable would have a value of 1; for a file + with a total size of 4,294,967,295 bytes this variable + would be 0." + ::= { sysApplInstallElmtEntry 10 } + + sysApplInstallElmtCurSizeLow OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current file size modulo 2^32 bytes. + For example, for a file with a total size of 4,294,967,296 + + + +Krupczak & Saperia Standards Track [Page 17] + +RFC 2287 MIB for Applications February 1998 + + + bytes this variable would have a value of 0; for a file with + a total size of 4,294,967,295 bytes this variable would be + 4,294,967,295." + ::= { sysApplInstallElmtEntry 11 } + + + + -- sysApplRun Group + -- This group models activity information for applications + -- that have been invoked and are either currently running, + -- or have previously run on the host system. Likewise, + -- the individual elements of an invoked application are + -- also modeled to show currently running processes, and + -- processes that have run in the past. + + -- sysApplRunTable + -- The sysApplRunTable contains the application instances + -- which are currently running on the host. Since a single + -- application might be invoked multiple times, an entry is + -- added to this table for each INVOCATION of an application. + -- The table is indexed by sysApplInstallPkgIndex, sysApplRunIndex + -- to enable managers to easily locate all invocations of + -- a particular application package. + + sysApplRunTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysApplRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table describes the applications which are executing + on the host. Each time an application is invoked, + an entry is created in this table. When an application ends, + the entry is removed from this table and a corresponding + entry is created in the SysApplPastRunTable. + + A new entry is created in this table whenever the agent + implementation detects a new running process that is an + installed application element whose sysApplInstallElmtRole + designates it as being the application's primary executable + (sysApplInstallElmtRole = primary(2) ). + + The table is indexed by sysApplInstallPkgIndex, + sysApplRunIndex to enable managers to easily locate all + invocations of a particular application package." + ::= { sysApplRun 1 } + + sysApplRunEntry OBJECT-TYPE + SYNTAX SysApplRunEntry + + + +Krupczak & Saperia Standards Track [Page 18] + +RFC 2287 MIB for Applications February 1998 + + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The logical row describing an application which is + currently running on this host." + INDEX { sysApplInstallPkgIndex, sysApplRunIndex } + ::= { sysApplRunTable 1 } + + SysApplRunEntry ::= SEQUENCE { + sysApplRunIndex Unsigned32, + sysApplRunStarted DateAndTime, + sysApplRunCurrentState RunState + } + + sysApplRunIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Part of the index for this table. An arbitrary + integer used only for indexing purposes. Generally + monotonically increasing from 1 as new applications are + started on the host, it uniquely identifies application + invocations. + + The numbering for this index increases by 1 for each + INVOCATION of an application, regardless of which + installed application package this entry represents a + running instance of. + + An example of the indexing for a couple of entries is + shown below. + + : + sysApplRunStarted.17.14 + sysApplRunStarted.17.63 + sysApplRunStarted.18.13 + : + + In this example, the agent has observed 12 application + invocations when the application represented by entry 18 + in the sysApplInstallPkgTable is invoked. The next + invocation detected by the agent is an invocation of + installed application package 17. Some time later, + installed application 17 is invoked a second time. + + NOTE: this index is not intended to reflect a real-time + (wall clock time) ordering of application invocations; + + + +Krupczak & Saperia Standards Track [Page 19] + +RFC 2287 MIB for Applications February 1998 + + + it is merely intended to uniquely identify running + instances of applications. Although the + sysApplInstallPkgIndex is included in the INDEX clause + for this table, it serves only to ease searching of + this table by installed application and does not + contribute to uniquely identifying table entries." + ::= { sysApplRunEntry 1 } + + sysApplRunStarted OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time that the application was started." + ::= { sysApplRunEntry 2 } + + sysApplRunCurrentState OBJECT-TYPE + SYNTAX RunState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the running application instance. + The possible values are running(1), runnable(2) but waiting + for a resource such as CPU, waiting(3) for an event, + exiting(4), or other(5). This value is based on an evaluation + of the running elements of this application instance (see + sysApplElmRunState) and their Roles as defined by + sysApplInstallElmtRole. An agent implementation may + detect that an application instance is in the process of + exiting if one or more of its REQUIRED elements are no + longer running. Most agent implementations will wait until + a second internal poll has been completed to give the + system time to start REQUIRED elements before marking the + application instance as exiting." + ::= { sysApplRunEntry 3 } + + + -- sysApplPastRunTable + -- The sysApplPastRunTable provides a history of applications + -- previously run on the host computer. Entries are removed from + -- the sysApplRunTable and corresponding entries are added to this + -- table when an application becomes inactive. Entries remain in + -- this table until they are aged out when either the table size + -- reaches a maximum as determined by the sysApplPastRunMaxRows, + -- or when an entry has aged to exceed a time limit as set be + -- sysApplPastRunTblTimeLimit. + -- + -- When aging out entries, the oldest entry, as determined by + + + +Krupczak & Saperia Standards Track [Page 20] + +RFC 2287 MIB for Applications February 1998 + + + -- the value of sysApplPastRunTimeEnded, will be removed first. + + sysApplPastRunTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysApplPastRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A history of the applications that have previously run + on the host computer. An entry's information is moved to + this table from the sysApplRunTable when the invoked + application represented by the entry ceases to be running. + + An agent implementation can determine that an application + invocation is no longer running by evaluating the running + elements of the application instance and their Roles as + defined by sysApplInstallElmtRole. Obviously, if there + are no running elements for the application instance, + then the application invocation is no longer running. + If any one of the REQUIRED elements is not running, + the application instance may be in the process of exiting. + Most agent implementations will wait until a second internal + poll has been completed to give the system time to either + restart partial failures or to give all elements time to + exit. If, after the second poll, there are REQUIRED + elements that are not running, then the application + instance may be considered by the agent implementation + to no longer be running. + + Entries remain in the sysApplPastRunTable until they + are aged out when either the table size reaches a maximum + as determined by the sysApplPastRunMaxRows, or when an entry + has aged to exceed a time limit as set by + sysApplPastRunTblTimeLimit. + + Entries in this table are indexed by sysApplInstallPkgIndex, + sysApplPastRunIndex to facilitate retrieval of all past + run invocations of a particular installed application." + ::= { sysApplRun 2 } + + sysApplPastRunEntry OBJECT-TYPE + SYNTAX SysApplPastRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The logical row describing an invocation of an application + which was previously run and has terminated. The entry + is basically copied from the sysApplRunTable when the + application instance terminates. Hence, the entry's + + + +Krupczak & Saperia Standards Track [Page 21] + +RFC 2287 MIB for Applications February 1998 + + + value for sysApplPastRunIndex is the same as its value was + for sysApplRunIndex." + INDEX { sysApplInstallPkgIndex, sysApplPastRunIndex } + ::= { sysApplPastRunTable 1 } + + SysApplPastRunEntry ::= SEQUENCE { + sysApplPastRunIndex Unsigned32, + sysApplPastRunStarted DateAndTime, + sysApplPastRunExitState INTEGER, + sysApplPastRunTimeEnded DateAndTime + } + + sysApplPastRunIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Part of the index for this table. An integer + matching the value of the removed sysApplRunIndex + corresponding to this row." + ::= { sysApplPastRunEntry 1 } + + sysApplPastRunStarted OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time that the application was started." + ::= { sysApplPastRunEntry 2 } + + sysApplPastRunExitState OBJECT-TYPE + SYNTAX INTEGER { + complete (1), -- normal exit at sysApplRunTimeEnded + failed (2), -- abnormal exit + other (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the application instance when it terminated. + This value is based on an evaluation of the running elements + of an application and their Roles as defined by + sysApplInstallElmtRole. An application instance is said to + have exited in a COMPLETE state and its entry is removed + from the sysApplRunTable and added to the sysApplPastRunTable + when the agent detects that ALL elements of an application + invocation are no longer running. Most agent implementations + will wait until a second internal poll has been completed to + + + +Krupczak & Saperia Standards Track [Page 22] + +RFC 2287 MIB for Applications February 1998 + + + give the system time to either restart partial failures or + to give all elements time to exit. A failed state occurs if, + after the second poll, any elements continue to run but + one or more of the REQUIRED elements are no longer running. + All other combinations MUST be defined as OTHER." + ::= { sysApplPastRunEntry 3 } + + sysApplPastRunTimeEnded OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The DateAndTime the application instance was determined + to be no longer running." + ::= { sysApplPastRunEntry 4 } + + -- sysApplElmtRunTable + -- The sysApplElmtRunTable contains an entry for each process that + -- is currently running on the host. An entry is created in + -- this table for each process at the time it is started, and will + -- remain in the table until the process terminates. + -- + -- The table is indexed by sysApplElmtRunInstallPkg, + -- sysApplElmtRunInvocID, and sysApplElmtRunIndex to make it easy + -- to locate all running elements of a particular invoked application + -- which has been installed on the system. + + + sysApplElmtRunTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysApplElmtRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table describes the processes which are + currently executing on the host system. Each entry + represents a running process and is associated with + the invoked application of which that process is a part, if + possible. This table contains an entry for every process + currently running on the system, regardless of whether its + 'parent' application can be determined. So, for example, + processes like 'ps' and 'grep' will have entries though they + are not associated with an installed application package. + + Because a running application may involve + more than one executable, it is possible to have + multiple entries in this table for each application. + Entries are removed from this table when the process + terminates. + + + +Krupczak & Saperia Standards Track [Page 23] + +RFC 2287 MIB for Applications February 1998 + + + The table is indexed by sysApplElmtRunInstallPkg, + sysApplElmtRunInvocID, and sysApplElmtRunIndex to + facilitate the retrieval of all running elements of a + particular invoked application which has been installed on + the system." + ::= { sysApplRun 3 } + + sysApplElmtRunEntry OBJECT-TYPE + SYNTAX SysApplElmtRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The logical row describing a process currently + running on this host. When possible, the entry is + associated with the invoked application of which it + is a part." + INDEX { sysApplElmtRunInstallPkg, sysApplElmtRunInvocID, + sysApplElmtRunIndex } + ::= { sysApplElmtRunTable 1 } + + SysApplElmtRunEntry ::= SEQUENCE { + sysApplElmtRunInstallPkg Unsigned32, + sysApplElmtRunInvocID Unsigned32, + sysApplElmtRunIndex Unsigned32, + sysApplElmtRunInstallID Unsigned32, + sysApplElmtRunTimeStarted DateAndTime, + sysApplElmtRunState RunState, + sysApplElmtRunName LongUtf8String, + sysApplElmtRunParameters Utf8String, + sysApplElmtRunCPU TimeTicks, + sysApplElmtRunMemory Gauge32, + sysApplElmtRunNumFiles Gauge32, + sysApplElmtRunUser Utf8String + } + + sysApplElmtRunInstallPkg OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Part of the index for this table, this value + identifies the installed software package for + the application of which this process is a part. + Provided that the process's 'parent' application can be + determined, the value of this object is the same + value as the sysApplInstallPkgIndex for the + entry in the sysApplInstallPkgTable that corresponds + to the installed application of which this process + + + +Krupczak & Saperia Standards Track [Page 24] + +RFC 2287 MIB for Applications February 1998 + + + is a part. + + If, however, the 'parent' application cannot be + determined, (for example the process is not part + of a particular installed application), the value + for this object is then '0', signifying that this + process cannot be related back to an application, + and in turn, an installed software package." + ::= { sysApplElmtRunEntry 1 } + + sysApplElmtRunInvocID OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Part of the index for this table, this value + identifies the invocation of an application of which + this process is a part. Provided that the 'parent' + application can be determined, the value of this object + is the same value as the sysApplRunIndex for the + corresponding application invocation in the + sysApplRunTable. + + If, however, the 'parent' application cannot be + determined, the value for this object is then '0', + signifying that this process cannot be related back + to an invocation of an application in the + sysApplRunTable." + ::= { sysApplElmtRunEntry 2 } + + sysApplElmtRunIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Part of the index for this table. A unique value + for each process running on the host. Wherever + possible, this should be the system's native, unique + identification number." + ::= { sysApplElmtRunEntry 3 } + + + sysApplElmtRunInstallID OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index into the sysApplInstallElmtTable. The + + + +Krupczak & Saperia Standards Track [Page 25] + +RFC 2287 MIB for Applications February 1998 + + + value of this object is the same value as the + sysApplInstallElmtIndex for the application element + of which this entry represents a running instance. + If this process cannot be associated with an installed + executable, the value should be '0'." + ::= { sysApplElmtRunEntry 4 } + + sysApplElmtRunTimeStarted OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time the process was started." + ::= { sysApplElmtRunEntry 5 } + + sysApplElmtRunState OBJECT-TYPE + SYNTAX RunState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the running process. The + possible values are running(1), runnable(2) but waiting + for a resource such as CPU, waiting(3) for an event, + exiting(4), or other(5)." + ::= { sysApplElmtRunEntry 6 } + + sysApplElmtRunName OBJECT-TYPE + SYNTAX LongUtf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The full path and filename of the process. + For example, '/opt/MYYpkg/bin/myyproc' would + be returned for process 'myyproc' whose execution + path is '/opt/MYYpkg/bin/myyproc'." + ::= { sysApplElmtRunEntry 7 } + + sysApplElmtRunParameters OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The starting parameters for the process." + ::= { sysApplElmtRunEntry 8 } + + sysApplElmtRunCPU OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + + + +Krupczak & Saperia Standards Track [Page 26] + +RFC 2287 MIB for Applications February 1998 + + + STATUS current + DESCRIPTION + "The number of centi-seconds of the total system's + CPU resources consumed by this process. Note that + on a multi-processor system, this value may + have been incremented by more than one centi-second + in one centi-second of real (wall clock) time." + ::= { sysApplElmtRunEntry 9 } + + sysApplElmtRunMemory OBJECT-TYPE + SYNTAX Gauge32 + UNITS "Kbytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of real system memory measured in + Kbytes currently allocated to this process." + + ::= { sysApplElmtRunEntry 10 } + + sysApplElmtRunNumFiles OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of regular files currently open by the + process. Transport connections (sockets) + should NOT be included in the calculation of + this value, nor should operating system specific + special file types." + ::= { sysApplElmtRunEntry 11 } + + sysApplElmtRunUser OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The process owner's login name (e.g. root)." + ::= { sysApplElmtRunEntry 12 } + + -- sysApplElmtPastRunTable + -- The sysApplElmtPastRunTable maintains a history of + -- processes which have previously executed on + -- the host as part of an application. Upon termination + -- of a process, the entry representing the process is removed from + -- the sysApplElmtRunTable and a corresponding entry is created in + -- this table provided that the process was part of an + -- identifiable application. If the process could not be associated + + + +Krupczak & Saperia Standards Track [Page 27] + +RFC 2287 MIB for Applications February 1998 + + + -- with an invoked application, no corresponding entry is created. + -- Hence, whereas the sysApplElmtRunTable contains an entry for + -- every process currently executing on the system, the + -- sysApplElmtPastRunTable only contains entries for processes + -- that previously executed as part of an invoked application. + -- + -- Entries remain in this table until they are aged out when + -- either the number of entries in the table reaches a + -- maximum as determined by sysApplElmtPastRunMaxRows, or + -- when an entry has aged to exceed a time limit as set by + -- sysApplElmtPastRunTblTimeLimit. When aging out entries, + -- the oldest entry, as determined by the value of + -- sysApplElmtPastRunTimeEnded, will be removed first. + -- + -- The table is indexed by sysApplInstallPkgIndex (from the + -- sysApplInstallPkgTable), sysApplElmtPastRunInvocID, and + -- sysApplElmtPastRunIndex to make it easy to locate all + -- previously executed processes of a particular invoked application + -- that has been installed on the system. + + + sysApplElmtPastRunTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysApplElmtPastRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table describes the processes which have previously + executed on the host system as part of an application. + Each entry represents a process which has previously + executed and is associated with the invoked application + of which it was a part. Because an invoked application + may involve more than one executable, it is possible + to have multiple entries in this table for + each application invocation. Entries are added + to this table when the corresponding process in the + sysApplElmtRun Table terminates. + + Entries remain in this table until they are aged out when + either the number of entries in the table reaches a + maximum as determined by sysApplElmtPastRunMaxRows, or + when an entry has aged to exceed a time limit as set by + sysApplElmtPastRunTblTimeLimit. When aging out entries, + the oldest entry, as determined by the value of + sysApplElmtPastRunTimeEnded, will be removed first. + + The table is indexed by sysApplInstallPkgIndex (from the + sysApplInstallPkgTable), sysApplElmtPastRunInvocID, + and sysApplElmtPastRunIndex to make it easy to locate all + + + +Krupczak & Saperia Standards Track [Page 28] + +RFC 2287 MIB for Applications February 1998 + + + previously executed processes of a particular invoked + application that has been installed on the system." + ::= { sysApplRun 4 } + + sysApplElmtPastRunEntry OBJECT-TYPE + SYNTAX SysApplElmtPastRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The logical row describing a process which was + previously executed on this host as part of an + installed application. The entry is basically copied + from the sysApplElmtRunTable when the process + terminates. Hence, the entry's value for + sysApplElmtPastRunIndex is the same as its value + was for sysApplElmtRunIndex. Note carefully: only those + processes which could be associated with an + identified application are included in this table." + INDEX { sysApplInstallPkgIndex, sysApplElmtPastRunInvocID, + sysApplElmtPastRunIndex } + ::= { sysApplElmtPastRunTable 1 } + + SysApplElmtPastRunEntry ::= SEQUENCE { + sysApplElmtPastRunInvocID Unsigned32, + sysApplElmtPastRunIndex Unsigned32, + sysApplElmtPastRunInstallID Unsigned32, + sysApplElmtPastRunTimeStarted DateAndTime, + sysApplElmtPastRunTimeEnded DateAndTime, + sysApplElmtPastRunName LongUtf8String, + sysApplElmtPastRunParameters Utf8String, + sysApplElmtPastRunCPU TimeTicks, + sysApplElmtPastRunMemory Unsigned32, + sysApplElmtPastRunNumFiles Unsigned32, + sysApplElmtPastRunUser Utf8String + } + + sysApplElmtPastRunInvocID OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Part of the index for this table, this value + identifies the invocation of an application of which + the process represented by this entry was a part. + The value of this object is the same value as the + sysApplRunIndex for the corresponding application + invocation in the sysApplRunTable. If the invoked + application as a whole has terminated, it will be the + + + +Krupczak & Saperia Standards Track [Page 29] + +RFC 2287 MIB for Applications February 1998 + + + same as the sysApplPastRunIndex." + ::= { sysApplElmtPastRunEntry 1 } + + sysApplElmtPastRunIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Part of the index for this table. An integer + assigned by the agent equal to the corresponding + sysApplElmtRunIndex which was removed from the + sysApplElmtRunTable and moved to this table + when the element terminated. + + Note: entries in this table are indexed by + sysApplElmtPastRunInvocID, sysApplElmtPastRunIndex. + The possibility exists, though unlikely, of a + collision occurring by a new entry which was run + by the same invoked application (InvocID), and + was assigned the same process identification number + (ElmtRunIndex) as an element which was previously + run by the same invoked application. + + Should this situation occur, the new entry replaces + the old entry. + + See Section: 'Implementation Issues - + sysApplElmtPastRunTable Entry Collisions' for the + conditions that would have to occur in order for a + collision to occur." + ::= { sysApplElmtPastRunEntry 2 } + + + sysApplElmtPastRunInstallID OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index into the installed element table. The + value of this object is the same value as the + sysApplInstallElmtIndex for the application element + of which this entry represents a previously executed + process." + ::= { sysApplElmtPastRunEntry 3 } + + sysApplElmtPastRunTimeStarted OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + + + +Krupczak & Saperia Standards Track [Page 30] + +RFC 2287 MIB for Applications February 1998 + + + STATUS current + DESCRIPTION + "The time the process was started." + ::= { sysApplElmtPastRunEntry 4 } + + sysApplElmtPastRunTimeEnded OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time the process ended." + ::= { sysApplElmtPastRunEntry 5 } + + sysApplElmtPastRunName OBJECT-TYPE + SYNTAX LongUtf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The full path and filename of the process. + For example, '/opt/MYYpkg/bin/myyproc' would + be returned for process 'myyproc' whose execution + path was '/opt/MYYpkg/bin/myyproc'." + ::= { sysApplElmtPastRunEntry 6 } + + sysApplElmtPastRunParameters OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The starting parameters for the process." + ::= { sysApplElmtPastRunEntry 7 } + + sysApplElmtPastRunCPU OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The last known number of centi-seconds of the total + system's CPU resources consumed by this process. + Note that on a multi-processor system, this value may + increment by more than one centi-second in one + centi-second of real (wall clock) time." + ::= { sysApplElmtPastRunEntry 8 } + + sysApplElmtPastRunMemory OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + UNITS "Kbytes" + MAX-ACCESS read-only + + + +Krupczak & Saperia Standards Track [Page 31] + +RFC 2287 MIB for Applications February 1998 + + + STATUS current + DESCRIPTION + "The last known total amount of real system memory + measured in Kbytes allocated to this process before it + terminated." + ::= { sysApplElmtPastRunEntry 9 } + + sysApplElmtPastRunNumFiles OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The last known number of files open by the + process before it terminated. Transport + connections (sockets) should NOT be included in + the calculation of this value." + ::= { sysApplElmtPastRunEntry 10 } + + sysApplElmtPastRunUser OBJECT-TYPE + SYNTAX Utf8String + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The process owner's login name (e.g. root)." + ::= { sysApplElmtPastRunEntry 11 } + + + -- Additional Scalar objects to control table sizes + + sysApplPastRunMaxRows OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of entries allowed in the + sysApplPastRunTable. Once the number of rows in + the sysApplPastRunTable reaches this value, the + management subsystem will remove the oldest entry + in the table to make room for the new entry to be added. + Entries will be removed on the basis of oldest + sysApplPastRunTimeEnded value first. + + This object may be used to control the amount of + system resources that can used for sysApplPastRunTable + entries. A conforming implementation should attempt + to support the default value, however, a lesser value + may be necessary due to implementation-dependent issues + and resource availability." + + + +Krupczak & Saperia Standards Track [Page 32] + +RFC 2287 MIB for Applications February 1998 + + + DEFVAL { 500 } + ::= { sysApplRun 5 } + + sysApplPastRunTableRemItems OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A counter of the number of entries removed from + the sysApplPastRunTable because of table size limitations + as set in sysApplPastRunMaxRows. This counter is the + number of entries the management subsystem has had to + remove in order to make room for new entries (so as not + to exceed the limit set by sysApplPastRunMaxRows) since + the last initialization of the management subsystem." + ::= { sysApplRun 6 } + + sysApplPastRunTblTimeLimit OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum time in seconds which an entry in the + sysApplPastRunTable may exist before it is removed. + Any entry that is older than this value will be + removed (aged out) from the table. + + Note that an entry may be aged out prior to reaching + this time limit if it is the oldest entry in the + table and must be removed to make space for a new + entry so as to not exceed sysApplPastRunMaxRows." + DEFVAL { 7200 } + ::= { sysApplRun 7 } + + sysApplElemPastRunMaxRows OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of entries allowed in the + sysApplElmtPastRunTable. Once the number of rows in + the sysApplElmtPastRunTable reaches this value, + the management subsystem will remove the oldest entry + to make room for the new entry to be added. Entries + will be removed on the basis of oldest + sysApplElmtPastRunTimeEnded value first. + + + + +Krupczak & Saperia Standards Track [Page 33] + +RFC 2287 MIB for Applications February 1998 + + + This object may be used to control the amount of + system resources that can used for sysApplElemPastRunTable + entries. A conforming implementation should attempt + to support the default value, however, a lesser value + may be necessary due to implementation-dependent issues + and resource availability." + DEFVAL { 500 } + ::= { sysApplRun 8 } + + sysApplElemPastRunTableRemItems OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A counter of the number of entries removed from the + sysApplElemPastRunTable because of table size limitations + as set in sysApplElemPastRunMaxRows. This counter is the + number of entries the management subsystem has had to + remove in order to make room for new entries (so as not + to exceed the limit set by sysApplElemPastRunMaxRows) since + the last initialization of the management subsystem." + ::= { sysApplRun 9 } + + sysApplElemPastRunTblTimeLimit OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum time in seconds which an entry in the + sysApplElemPastRunTable may exist before it is removed. + Any entry that is older than this value will be + removed (aged out) from the table. + + Note that an entry may be aged out prior to reaching + this time limit if it is the oldest entry in the + table and must be removed to make space for a new + entry so as to not exceed sysApplElemPastRunMaxRows." + DEFVAL { 7200 } + ::= { sysApplRun 10 } + + sysApplAgentPollInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum interval in seconds that the management + + + +Krupczak & Saperia Standards Track [Page 34] + +RFC 2287 MIB for Applications February 1998 + + + subsystem implementing this MIB will poll the status + of the managed resources. Because of the non-trivial + effort involved in polling the managed resources, + and because the method for obtaining the status of + the managed resources is implementation-dependent, + a conformant implementation may chose a lower bound + greater than 0. + + A value of 0 indicates that there is no delay + in the passing of information from the managed + resources to the agent." + DEFVAL { 60 } + ::= { sysApplRun 11 } + + + -- sysApplMap Group + -- This group contains a table, the sysApplMapTable, + -- whose sole purpose is to provide a 'backwards' + -- mapping so that, given a known sysApplElmtRunIndex + -- (process identification number), the corresponding invoked + -- application (sysApplRunIndex), installed element + -- (sysApplInstallElmtIndex), and installed application + -- package (sysApplInstallPkgIndex) can be quickly determined. + -- + -- The table will contain one entry for each process + -- currently running on the system. + -- + -- A backwards mapping is extremely useful since the tables + -- in this MIB module are typically indexed with the + -- installed application package (sysApplInstallPkgIndex) + -- as the primary key, and on down as required by the + -- specific table, with the process ID number (sysApplElmtRunIndex) + -- being the least significant key. + -- + -- It is expected that management applications will use + -- this mapping table by doing a 'GetNext' operation with + -- the known process ID number (sysApplElmtRunIndex) as the partial + -- instance identifier. Assuming that there is an entry for + -- the process, the result should return a single columnar value, + -- the sysApplMapInstallPkgIndex, with the sysApplElmtRunIndex, + -- sysApplRunIndex, and sysApplInstallElmtIndex contained in the + -- instance identifier for the returned MIB object value. + -- + -- NOTE: if the process can not be associated back to an + -- invoked application installed on the system, then the + -- value returned for the columnar value sysApplMapInstallPkgIndex + -- will be '0' and the instance portion of the object-identifier + -- will be the process ID number (sysApplElmtRunIndex) followed + + + +Krupczak & Saperia Standards Track [Page 35] + +RFC 2287 MIB for Applications February 1998 + + + -- by 0.0. + + sysApplMapTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysApplMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The sole purpose of this table is to provide a + 'backwards' mapping so that, given a known + sysApplElmtRunIndex (process identification number), + the corresponding invoked application (sysApplRunIndex), + installed element (sysApplInstallElmtIndex), and + installed application package (sysApplInstallPkgIndex) + can be quickly determined. + + This table will contain one entry for each process + that is currently executing on the system. + + It is expected that management applications will use + this mapping table by doing a 'GetNext' operation with + the known process ID number (sysApplElmtRunIndex) as the + partial instance identifier. Assuming that there is an + entry for the process, the result should return a single + columnar value, the sysApplMapInstallPkgIndex, with the + sysApplElmtRunIndex, sysApplRunIndex, and + sysApplInstallElmtIndex contained in the instance identifier + for the returned MIB object value. + + NOTE: if the process can not be associated back to an + invoked application installed on the system, then the + value returned for the columnar value + sysApplMapInstallPkgIndex will be '0' and the instance + portion of the object-identifier will be the process ID + number (sysApplElmtRunIndex) followed by 0.0." + ::= { sysApplMap 1 } + + sysApplMapEntry OBJECT-TYPE + SYNTAX SysApplMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A logical row representing a process currently running + on the system. This entry provides the index mapping from + process identifier, back to the invoked application, + installed element, and finally, the installed application + package. The entry includes only one accessible columnar + object, the sysApplMapInstallPkgIndex, but the + invoked application and installed element can be + + + +Krupczak & Saperia Standards Track [Page 36] + +RFC 2287 MIB for Applications February 1998 + + + determined from the instance identifier since they form + part of the index clause." + INDEX { sysApplElmtRunIndex, sysApplElmtRunInvocID, + sysApplMapInstallElmtIndex } + ::= { sysApplMapTable 1 } + + SysApplMapEntry ::= SEQUENCE { + sysApplMapInstallElmtIndex Unsigned32, + sysApplMapInstallPkgIndex Unsigned32 + } + + sysApplMapInstallElmtIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index into the sysApplInstallElmtTable. The + value of this object is the same value as the + sysApplInstallElmtIndex for the application element + of which this entry represents a running instance. + If this process cannot be associated to an installed + executable, the value should be '0'." + ::= { sysApplMapEntry 1 } + + sysApplMapInstallPkgIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..'ffffffff'h) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object identifies the installed + software package for the application of which this + process is a part. Provided that the process's 'parent' + application can be determined, the value of this object + is the same value as the sysApplInstallPkgIndex for the + entry in the sysApplInstallPkgTable that corresponds + to the installed application of which this process + is a part. + + If, however, the 'parent' application cannot be + determined, (for example the process is not part + of a particular installed application), the value + for this object is then '0', signifying that this + process cannot be related back to an application, + and in turn, an installed software package." + ::= { sysApplMapEntry 2 } + + + -- Conformance Macros + + + +Krupczak & Saperia Standards Track [Page 37] + +RFC 2287 MIB for Applications February 1998 + + + sysApplMIBCompliances OBJECT IDENTIFIER ::= { sysApplConformance 1 } + sysApplMIBGroups OBJECT IDENTIFIER ::= { sysApplConformance 2 } + + sysApplMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for conformance to + the System Application MIB" + MODULE -- this module + MANDATORY-GROUPS { sysApplInstalledGroup, + sysApplRunGroup, sysApplMapGroup } + ::= { sysApplMIBCompliances 1 } + + sysApplInstalledGroup OBJECT-GROUP + OBJECTS { sysApplInstallPkgManufacturer, + sysApplInstallPkgProductName, + sysApplInstallPkgVersion, + sysApplInstallPkgSerialNumber, + sysApplInstallPkgDate, + sysApplInstallPkgLocation, + sysApplInstallElmtName, + sysApplInstallElmtType, + sysApplInstallElmtDate, + sysApplInstallElmtPath, + sysApplInstallElmtSizeHigh, + sysApplInstallElmtSizeLow, + sysApplInstallElmtRole, + sysApplInstallElmtModifyDate, + sysApplInstallElmtCurSizeHigh, + sysApplInstallElmtCurSizeLow } + STATUS current + DESCRIPTION + "The system application installed group contains + information about applications and their constituent + components which have been installed on the host system." + ::= { sysApplMIBGroups 1 } + + sysApplRunGroup OBJECT-GROUP + OBJECTS { sysApplRunStarted, + sysApplRunCurrentState, + sysApplPastRunStarted, + sysApplPastRunExitState, + sysApplPastRunTimeEnded, + sysApplElmtRunInstallID, + sysApplElmtRunTimeStarted, + sysApplElmtRunState, + sysApplElmtRunName, + sysApplElmtRunParameters, + + + +Krupczak & Saperia Standards Track [Page 38] + +RFC 2287 MIB for Applications February 1998 + + + sysApplElmtRunCPU, + sysApplElmtRunMemory, + sysApplElmtRunNumFiles, + sysApplElmtRunUser, + sysApplElmtPastRunInstallID, + sysApplElmtPastRunTimeStarted, + sysApplElmtPastRunTimeEnded, + sysApplElmtPastRunName, + sysApplElmtPastRunParameters, + sysApplElmtPastRunCPU, + sysApplElmtPastRunMemory, + sysApplElmtPastRunNumFiles, + sysApplElmtPastRunUser, + sysApplPastRunMaxRows, + sysApplPastRunTableRemItems, + sysApplPastRunTblTimeLimit, + sysApplElemPastRunMaxRows, + sysApplElemPastRunTableRemItems, + sysApplElemPastRunTblTimeLimit, + sysApplAgentPollInterval } + STATUS current + DESCRIPTION + "The system application run group contains information + about applications and associated elements which have + run or are currently running on the host system." + ::= { sysApplMIBGroups 2 } + + sysApplMapGroup OBJECT-GROUP + OBJECTS { sysApplMapInstallPkgIndex } + STATUS current + DESCRIPTION + "The Map Group contains a single table, sysApplMapTable, + that provides a backwards mapping for determining the + invoked application, installed element, and installed + application package given a known process identification + number." + ::= { sysApplMIBGroups 3 } + + END + + + + + + + + + + + + +Krupczak & Saperia Standards Track [Page 39] + +RFC 2287 MIB for Applications February 1998 + + +7. Implementation Issues + + This section discusses implementation issues that are important for + both an agent developer, and a management application developer or + user to understand with regards to this MIB module. Although this + section does not attempt to prescribe a particular implementation + strategy, it does attempt to recognize some of the real world + limitations that could effect an implementation of this MIB module. + +7.1. Implementation with Polling Agents + + Implementations of the System Application MIB on popular operating + systems might require some considerable processing power to obtain + status information from the managed resources. It might also be + difficult to determine when an application or a process starts or + finishes. Implementors of this MIB might therefore choose an + implementation approach where the agent polls the managed resources + at regular intervals. The information retrieved by every poll is used + to update a cached version of this MIB maintained inside of the + agent. SNMP request are processed based on the information found in + this MIB cache. + + A scalar sysApplAgentPollInterval is defined to give the manager + control over the polling frequency. There is a trade- off between the + amount of resources consumed during every poll to update the MIB + cache, and the accuracy of the information provided by the System + Application MIB agent. A default value of 60 seconds is defined to + keep the processing overhead low, while providing usable information + for long-lived processes. A manager is expected to adjust this value + if more accurate information about short-lived applications or + processes is needed, or if the amount of resources consumed by the + agent is too high. + +7.2. sysApplElmtPastRunTable Entry Collisions + + The sysApplElmtPastRunTable maintains a history of processes which + have previously executed on the host as part of an application. + Information is moved from the sysApplElmtRunTable to this PastRun + table when the process represented by the entry terminates. + + The sysApplElmtPastRunTable is indexed by the tuple, + (sysApplElmtPastRunInvocID, sysApplElmtPastRunIndex), where the first + part identifies the application invocation of which the process was a + part, and the second part identifies the process itself. + + Recall that the sysApplElmtRunIndex represents the system's unique + identification number assigned to a running process and that this + value is mapped to sysApplElmtPastRunIndex when the process + + + +Krupczak & Saperia Standards Track [Page 40] + +RFC 2287 MIB for Applications February 1998 + + + terminates and the entry's information is moved from the + sysApplElmtRunTable to the sysApplElmtPastRunTable. Many systems + re-use process ID numbers which are no longer assigned to running + processes; typically, the process numbers wrap and the next available + process number is used. + + It is therefore possible for two entries in the sysApplElmtPastRun + Table to have the same value for sysApplElmtPastRunIndex. For this + reason, entries in the ElmtPastRun table are indexed by the tuple + sysApplElmtPastRunInvocID, sysApplElmtPastRunIndex to reduce the + chance of a collision by two past run elements with the same + sysApplElmtPastRunIndex. + + However, it is still possible, though unlikely, for a collision to + occur if the following happens: + + 1) the invoked application (identified by InvocID), has an + element which runs, terminates, and is moved into the + sysApplElmtPastRun table (index: InvocID, RunIndex) + + 2) the numbers used for the system's process identification + numbering wrap + + 3) that same invoked application (same InvocID), has another + element process run, AND that process is assigned the same + identification number as one of the processes previously run by + that invoked application (same RunIndex), and finally, + + 4) that element process terminates and is moved to the + sysApplElmtPastRun table prior to the old, duplicate (InvocID, + RunIndex) entry being aged out of the table by settings defined + for sysApplElmtPastRunMaxRows and + sysApplElmtPastRunTblTimeLimit. + + In the event that a collision occurs, the new entry will replace the + old entry. + +8. Security Considerations + + In order to implement this MIB, an agent must make certain management + information available about various logical and physical entities + within a managed system which may be considered sensitive in some + network environments. + + Therefore, a network administrator may wish to employ instance-level + access control, and configure the access mechanism (i.e., community + strings in SNMPv1 and SNMPv2C), such that certain instances within + this MIB are excluded from particular MIB views. + + + +Krupczak & Saperia Standards Track [Page 41] + +RFC 2287 MIB for Applications February 1998 + + +9. Acknowledgements + + This document was produced by the Application MIB working group. + Special acknowledgement is made to: + + Rick Sturm + Enterprise Management Professional Services, Inc. + sturm@emi-summit.com + For hosting the working group mailing list, and for his + participation in the development of the initial draft. + + + Jon Weinstock + General Instrument Corporation + jweinstock@gic.gi.com + For his participation in the development of the initial drafts + and for serving as editor for drafts 1 and 2. + + The editor would like to extend special thanks to the + following working group members for their contributions + to this effort. + + Harald Alvestrand, George Best, Ian Hanson, Harrie + Hazewinkel, Carl Kalbfleisch, Bobby Krupczak, Randy + Presuhn, Jon Saperia, Juergen Schoenwaelder + +11. Author's Address + + Cheryl Krupczak + Empire Technologies, Inc. + 541 Tenth Street, NW Suite 169 + Atlanta, GA 30318 + + Phone: 770.384.0184 + EMail: cheryl@empiretech.com + + Jonathan Saperia + BGS Systems Inc. + saperia@networks.bgs.com + +12. References + + [1] Information processing systems - Open Systems + Interconnection - Specification of Abstract Syntax + Notation One (ASN.1), International Organization for + Standardization. International Standard 8824, (December, + 1987). + + + + +Krupczak & Saperia Standards Track [Page 42] + +RFC 2287 MIB for Applications February 1998 + + + [2] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., + and S. Waldbusser, "Structure of Management Information + for Version 2 of the Simple Network Management Protocol + (SNMPv2)", RFC 1902, January 1996. + + [3] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., + and S. Waldbusser, "Textual Conventions for Version 2 of + the Simple Network Management Protocol (SNMPv2)", RFC + 1903, January 1996. + + [4] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., + and S. Waldbusser, "Conformance Statements for Version 2 + of the Simple Network Management Protocol (SNMPv2)", RFC + 1904, January 1996. + + [5] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., + and S. Waldbusser, "Protocol Operations for Version 2 of + the Simple Network Management Protocol (SNMPv2)", RFC + 1905, January 1996. + + [6] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., + and S. Waldbusser, "Transport Mappings for SNMPv2", RFC + 1906, January 1996. + + [7] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., + and S. Waldbusser, "Management Information Base for + Version 2 of the Simple Network Management Protocol + (SNMPv2)", RFC 1907, January 1996. + + [8] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., + and S. Waldbusser, "Coexistence between Version 1 and + Version 2 of the Internet-standard Network Management + Framework", RFC 1908, January 1996. + + [9] Grillo, P., and S. Waldbusser, "Host Resources MIB", RFC 1514, + September 1993. + + [10] Yergeau, F., "UTF-8, a transformation format of Unicode + and ISO 10646", RFC 2044, October 1996. + + [11] Krupczak, C., and S. Waldbusser, "Applicability of Host + Resources MIB to Application Management", Application MIB + working group report, October 1995. + + + + + + + + +Krupczak & Saperia Standards Track [Page 43] + +RFC 2287 MIB for Applications February 1998 + + +12. Full Copyright Statement + + Copyright (C) The Internet Society (1998). All Rights Reserved. + + This document and translations of it may be copied and furnished to + others, and derivative works that comment on or otherwise explain it + or assist in its implementation may be prepared, copied, published + and distributed, in whole or in part, without restriction of any + kind, provided that the above copyright notice and this paragraph are + included on all such copies and derivative works. However, this + document itself may not be modified in any way, such as by removing + the copyright notice or references to the Internet Society or other + Internet organizations, except as needed for the purpose of + developing Internet standards in which case the procedures for + copyrights defined in the Internet Standards process must be + followed, or as required to translate it into languages other than + English. + + The limited permissions granted above are perpetual and will not be + revoked by the Internet Society or its successors or assigns. + + This document and the information contained herein is provided on an + "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + + + + + + + + + + + + + + + + + + + + + + + + +Krupczak & Saperia Standards Track [Page 44] + -- cgit v1.2.3