From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc2812.txt | 3531 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3531 insertions(+) create mode 100644 doc/rfc/rfc2812.txt (limited to 'doc/rfc/rfc2812.txt') diff --git a/doc/rfc/rfc2812.txt b/doc/rfc/rfc2812.txt new file mode 100644 index 0000000..7f1b162 --- /dev/null +++ b/doc/rfc/rfc2812.txt @@ -0,0 +1,3531 @@ + + + + + + +Network Working Group C. Kalt +Request for Comments: 2812 April 2000 +Updates: 1459 +Category: Informational + + + Internet Relay Chat: Client Protocol + +Status of this Memo + + This memo provides information for the Internet community. It does + not specify an Internet standard of any kind. Distribution of this + memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (2000). All Rights Reserved. + +IESG NOTE: + + The IRC protocol itself enables several possibilities of transferring + data between clients, and just like with other transfer mechanisms + like email, the receiver of the data has to be careful about how the + data is handled. For more information on security issues with the IRC + protocol, see for example http://www.irchelp.org/irchelp/security/. + +Abstract + + The IRC (Internet Relay Chat) protocol is for use with text based + conferencing; the simplest client being any socket program capable of + connecting to the server. + + This document defines the Client Protocol, and assumes that the + reader is familiar with the IRC Architecture [IRC-ARCH]. + +Table of Contents + + 1. Labels ..................................................... 3 + 1.1 Servers ................................................ 3 + 1.2 Clients ................................................ 3 + 1.2.1 Users ............................................. 4 + 1.2.1.1 Operators .................................... 4 + 1.2.2 Services .......................................... 4 + 1.3 Channels ............................................... 4 + 2. The IRC Client Specification ............................... 5 + 2.1 Overview ............................................... 5 + 2.2 Character codes ........................................ 5 + 2.3 Messages ............................................... 5 + + + +Kalt Informational [Page 1] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 2.3.1 Message format in Augmented BNF ................... 6 + 2.4 Numeric replies ........................................ 8 + 2.5 Wildcard expressions ................................... 9 + 3. Message Details ............................................ 9 + 3.1 Connection Registration ................................ 10 + 3.1.1 Password message .................................. 10 + 3.1.2 Nick message ...................................... 10 + 3.1.3 User message ...................................... 11 + 3.1.4 Oper message ...................................... 12 + 3.1.5 User mode message ................................. 12 + 3.1.6 Service message ................................... 13 + 3.1.7 Quit .............................................. 14 + 3.1.8 Squit ............................................. 15 + 3.2 Channel operations ..................................... 15 + 3.2.1 Join message ...................................... 16 + 3.2.2 Part message ...................................... 17 + 3.2.3 Channel mode message .............................. 18 + 3.2.4 Topic message ..................................... 19 + 3.2.5 Names message ..................................... 20 + 3.2.6 List message ...................................... 21 + 3.2.7 Invite message .................................... 21 + 3.2.8 Kick command ...................................... 22 + 3.3 Sending messages ....................................... 23 + 3.3.1 Private messages .................................. 23 + 3.3.2 Notice ............................................ 24 + 3.4 Server queries and commands ............................ 25 + 3.4.1 Motd message ...................................... 25 + 3.4.2 Lusers message .................................... 25 + 3.4.3 Version message ................................... 26 + 3.4.4 Stats message ..................................... 26 + 3.4.5 Links message ..................................... 27 + 3.4.6 Time message ...................................... 28 + 3.4.7 Connect message ................................... 28 + 3.4.8 Trace message ..................................... 29 + 3.4.9 Admin command ..................................... 30 + 3.4.10 Info command ...................................... 31 + 3.5 Service Query and Commands ............................. 31 + 3.5.1 Servlist message .................................. 31 + 3.5.2 Squery ............................................ 32 + 3.6 User based queries ..................................... 32 + 3.6.1 Who query ......................................... 32 + 3.6.2 Whois query ....................................... 33 + 3.6.3 Whowas ............................................ 34 + 3.7 Miscellaneous messages ................................. 34 + 3.7.1 Kill message ...................................... 35 + 3.7.2 Ping message ...................................... 36 + 3.7.3 Pong message ...................................... 37 + 3.7.4 Error ............................................. 37 + + + +Kalt Informational [Page 2] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 4. Optional features .......................................... 38 + 4.1 Away ................................................... 38 + 4.2 Rehash message ......................................... 39 + 4.3 Die message ............................................ 39 + 4.4 Restart message ........................................ 40 + 4.5 Summon message ......................................... 40 + 4.6 Users .................................................. 41 + 4.7 Operwall message ....................................... 41 + 4.8 Userhost message ....................................... 42 + 4.9 Ison message ........................................... 42 + 5. Replies .................................................... 43 + 5.1 Command responses ...................................... 43 + 5.2 Error Replies .......................................... 53 + 5.3 Reserved numerics ...................................... 59 + 6. Current implementations .................................... 60 + 7. Current problems ........................................... 60 + 7.1 Nicknames .............................................. 60 + 7.2 Limitation of wildcards ................................ 61 + 7.3 Security considerations ................................ 61 + 8. Current support and availability ........................... 61 + 9. Acknowledgements ........................................... 61 + 10. References ................................................ 62 + 11. Author's Address .......................................... 62 + 12. Full Copyright Statement .................................. 63 + +1. Labels + + This section defines the identifiers used for the various components + of the IRC protocol. + +1.1 Servers + + Servers are uniquely identified by their name, which has a maximum + length of sixty three (63) characters. See the protocol grammar + rules (section 2.3.1) for what may and may not be used in a server + name. + +1.2 Clients + + For each client all servers MUST have the following information: a + netwide unique identifier (whose format depends on the type of + client) and the server which introduced the client. + + + + + + + + + +Kalt Informational [Page 3] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +1.2.1 Users + + Each user is distinguished from other users by a unique nickname + having a maximum length of nine (9) characters. See the protocol + grammar rules (section 2.3.1) for what may and may not be used in a + nickname. + + While the maximum length is limited to nine characters, clients + SHOULD accept longer strings as they may become used in future + evolutions of the protocol. + +1.2.1.1 Operators + + To allow a reasonable amount of order to be kept within the IRC + network, a special class of users (operators) is allowed to perform + general maintenance functions on the network. Although the powers + granted to an operator can be considered as 'dangerous', they are + nonetheless often necessary. Operators SHOULD be able to perform + basic network tasks such as disconnecting and reconnecting servers as + needed. In recognition of this need, the protocol discussed herein + provides for operators only to be able to perform such functions. + See sections 3.1.8 (SQUIT) and 3.4.7 (CONNECT). + + A more controversial power of operators is the ability to remove a + user from the connected network by 'force', i.e., operators are able + to close the connection between any client and server. The + justification for this is very delicate since its abuse is both + destructive and annoying, and its benefits close to inexistent. For + further details on this type of action, see section 3.7.1 (KILL). + +1.2.2 Services + + Each service is distinguished from other services by a service name + composed of a nickname and a server name. As for users, the nickname + has a maximum length of nine (9) characters. See the protocol + grammar rules (section 2.3.1) for what may and may not be used in a + nickname. + +1.3 Channels + + Channels names are strings (beginning with a '&', '#', '+' or '!' + character) of length up to fifty (50) characters. Apart from the + requirement that the first character is either '&', '#', '+' or '!', + the only restriction on a channel name is that it SHALL NOT contain + any spaces (' '), a control G (^G or ASCII 7), a comma (','). Space + is used as parameter separator and command is used as a list item + separator by the protocol). A colon (':') can also be used as a + delimiter for the channel mask. Channel names are case insensitive. + + + +Kalt Informational [Page 4] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + See the protocol grammar rules (section 2.3.1) for the exact syntax + of a channel name. + + Each prefix characterizes a different channel type. The definition + of the channel types is not relevant to the client-server protocol + and thus it is beyond the scope of this document. More details can + be found in "Internet Relay Chat: Channel Management" [IRC-CHAN]. + +2. The IRC Client Specification + +2.1 Overview + + The protocol as described herein is for use only with client to + server connections when the client registers as a user. + +2.2 Character codes + + No specific character set is specified. The protocol is based on a + set of codes which are composed of eight (8) bits, making up an + octet. Each message may be composed of any number of these octets; + however, some octet values are used for control codes, which act as + message delimiters. + + Regardless of being an 8-bit protocol, the delimiters and keywords + are such that protocol is mostly usable from US-ASCII terminal and a + telnet connection. + + Because of IRC's Scandinavian origin, the characters {}|^ are + considered to be the lower case equivalents of the characters []\~, + respectively. This is a critical issue when determining the + equivalence of two nicknames or channel names. + +2.3 Messages + + Servers and clients send each other messages, which may or may not + generate a reply. If the message contains a valid command, as + described in later sections, the client should expect a reply as + specified but it is not advised to wait forever for the reply; client + to server and server to server communication is essentially + asynchronous by nature. + + Each IRC message may consist of up to three main parts: the prefix + (OPTIONAL), the command, and the command parameters (maximum of + fifteen (15)). The prefix, command, and all parameters are separated + by one ASCII space character (0x20) each. + + + + + + +Kalt Informational [Page 5] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + The presence of a prefix is indicated with a single leading ASCII + colon character (':', 0x3b), which MUST be the first character of the + message itself. There MUST be NO gap (whitespace) between the colon + and the prefix. The prefix is used by servers to indicate the true + origin of the message. If the prefix is missing from the message, it + is assumed to have originated from the connection from which it was + received from. Clients SHOULD NOT use a prefix when sending a + message; if they use one, the only valid prefix is the registered + nickname associated with the client. + + The command MUST either be a valid IRC command or a three (3) digit + number represented in ASCII text. + + IRC messages are always lines of characters terminated with a CR-LF + (Carriage Return - Line Feed) pair, and these messages SHALL NOT + exceed 512 characters in length, counting all characters including + the trailing CR-LF. Thus, there are 510 characters maximum allowed + for the command and its parameters. There is no provision for + continuation of message lines. See section 6 for more details about + current implementations. + +2.3.1 Message format in Augmented BNF + + The protocol messages must be extracted from the contiguous stream of + octets. The current solution is to designate two characters, CR and + LF, as message separators. Empty messages are silently ignored, + which permits use of the sequence CR-LF between messages without + extra problems. + + The extracted message is parsed into the components , + and list of parameters (). + + The Augmented BNF representation for this is: + + message = [ ":" prefix SPACE ] command [ params ] crlf + prefix = servername / ( nickname [ [ "!" user ] "@" host ] ) + command = 1*letter / 3digit + params = *14( SPACE middle ) [ SPACE ":" trailing ] + =/ 14( SPACE middle ) [ SPACE [ ":" ] trailing ] + + nospcrlfcl = %x01-09 / %x0B-0C / %x0E-1F / %x21-39 / %x3B-FF + ; any octet except NUL, CR, LF, " " and ":" + middle = nospcrlfcl *( ":" / nospcrlfcl ) + trailing = *( ":" / " " / nospcrlfcl ) + + SPACE = %x20 ; space character + crlf = %x0D %x0A ; "carriage return" "linefeed" + + + + +Kalt Informational [Page 6] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + NOTES: + 1) After extracting the parameter list, all parameters are equal + whether matched by or . is just a + syntactic trick to allow SPACE within the parameter. + + 2) The NUL (%x00) character is not special in message framing, and + basically could end up inside a parameter, but it would cause + extra complexities in normal C string handling. Therefore, NUL + is not allowed within messages. + + Most protocol messages specify additional semantics and syntax for + the extracted parameter strings dictated by their position in the + list. For example, many server commands will assume that the first + parameter after the command is the list of targets, which can be + described with: + + target = nickname / server + msgtarget = msgto *( "," msgto ) + msgto = channel / ( user [ "%" host ] "@" servername ) + msgto =/ ( user "%" host ) / targetmask + msgto =/ nickname / ( nickname "!" user "@" host ) + channel = ( "#" / "+" / ( "!" channelid ) / "&" ) chanstring + [ ":" chanstring ] + servername = hostname + host = hostname / hostaddr + hostname = shortname *( "." shortname ) + shortname = ( letter / digit ) *( letter / digit / "-" ) + *( letter / digit ) + ; as specified in RFC 1123 [HNAME] + hostaddr = ip4addr / ip6addr + ip4addr = 1*3digit "." 1*3digit "." 1*3digit "." 1*3digit + ip6addr = 1*hexdigit 7( ":" 1*hexdigit ) + ip6addr =/ "0:0:0:0:0:" ( "0" / "FFFF" ) ":" ip4addr + nickname = ( letter / special ) *8( letter / digit / special / "-" ) + targetmask = ( "$" / "#" ) mask + ; see details on allowed masks in section 3.3.1 + chanstring = %x01-07 / %x08-09 / %x0B-0C / %x0E-1F / %x21-2B + chanstring =/ %x2D-39 / %x3B-FF + ; any octet except NUL, BELL, CR, LF, " ", "," and ":" + channelid = 5( %x41-5A / digit ) ; 5( A-Z / 0-9 ) + + + + + + + + + + + +Kalt Informational [Page 7] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Other parameter syntaxes are: + + user = 1*( %x01-09 / %x0B-0C / %x0E-1F / %x21-3F / %x41-FF ) + ; any octet except NUL, CR, LF, " " and "@" + key = 1*23( %x01-05 / %x07-08 / %x0C / %x0E-1F / %x21-7F ) + ; any 7-bit US_ASCII character, + ; except NUL, CR, LF, FF, h/v TABs, and " " + letter = %x41-5A / %x61-7A ; A-Z / a-z + digit = %x30-39 ; 0-9 + hexdigit = digit / "A" / "B" / "C" / "D" / "E" / "F" + special = %x5B-60 / %x7B-7D + ; "[", "]", "\", "`", "_", "^", "{", "|", "}" + + NOTES: + 1) The syntax is given here for the sole purpose of + indicating the format to follow for IP addresses. This + reflects the fact that the only available implementations of + this protocol uses TCP/IP as underlying network protocol but is + not meant to prevent other protocols to be used. + + 2) has a maximum length of 63 characters. This is a + limitation of the protocol as internet hostnames (in + particular) can be longer. Such restriction is necessary + because IRC messages are limited to 512 characters in length. + Clients connecting from a host which name is longer than 63 + characters are registered using the host (numeric) address + instead of the host name. + + 3) Some parameters used in the following sections of this + documents are not defined here as there is nothing specific + about them besides the name that is used for convenience. + These parameters follow the general syntax defined for + . + +2.4 Numeric replies + + Most of the messages sent to the server generate a reply of some + sort. The most common reply is the numeric reply, used for both + errors and normal replies. The numeric reply MUST be sent as one + message consisting of the sender prefix, the three-digit numeric, and + the target of the reply. A numeric reply is not allowed to originate + from a client. In all other respects, a numeric reply is just like a + normal message, except that the keyword is made up of 3 numeric + digits rather than a string of letters. A list of different replies + is supplied in section 5 (Replies). + + + + + + +Kalt Informational [Page 8] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +2.5 Wildcard expressions + + When wildcards are allowed in a string, it is referred as a "mask". + + For string matching purposes, the protocol allows the use of two + special characters: '?' (%x3F) to match one and only one character, + and '*' (%x2A) to match any number of any characters. These two + characters can be escaped using the character '\' (%x5C). + + The Augmented BNF syntax for this is: + + mask = *( nowild / noesc wildone / noesc wildmany ) + wildone = %x3F + wildmany = %x2A + nowild = %x01-29 / %x2B-3E / %x40-FF + ; any octet except NUL, "*", "?" + noesc = %x01-5B / %x5D-FF + ; any octet except NUL and "\" + matchone = %x01-FF + ; matches wildone + matchmany = *matchone + ; matches wildmany + + Examples: + + a?c ; Matches any string of 3 characters in length starting + with "a" and ending with "c" + + a*c ; Matches any string of at least 2 characters in length + starting with "a" and ending with "c" + +3. Message Details + + On the following pages there are descriptions of each message + recognized by the IRC server and client. All commands described in + this section MUST be implemented by any server for this protocol. + + Where the reply ERR_NOSUCHSERVER is returned, it means that the + target of the message could not be found. The server MUST NOT send + any other replies after this error for that command. + + The server to which a client is connected is required to parse the + complete message, and return any appropriate errors. + + If multiple parameters is presented, then each MUST be checked for + validity and appropriate responses MUST be sent back to the client. + In the case of incorrect messages which use parameter lists with + comma as an item separator, a reply MUST be sent for each item. + + + +Kalt Informational [Page 9] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +3.1 Connection Registration + + The commands described here are used to register a connection with an + IRC server as a user as well as to correctly disconnect. + + A "PASS" command is not required for a client connection to be + registered, but it MUST precede the latter of the NICK/USER + combination (for a user connection) or the SERVICE command (for a + service connection). The RECOMMENDED order for a client to register + is as follows: + + 1. Pass message + 2. Nick message 2. Service message + 3. User message + + Upon success, the client will receive an RPL_WELCOME (for users) or + RPL_YOURESERVICE (for services) message indicating that the + connection is now registered and known the to the entire IRC network. + The reply message MUST contain the full client identifier upon which + it was registered. + +3.1.1 Password message + + Command: PASS + Parameters: + + The PASS command is used to set a 'connection password'. The + optional password can and MUST be set before any attempt to register + the connection is made. Currently this requires that user send a + PASS command before sending the NICK/USER combination. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_ALREADYREGISTRED + + Example: + + PASS secretpasswordhere + +3.1.2 Nick message + + + Command: NICK + Parameters: + + NICK command is used to give user a nickname or change the existing + one. + + + + +Kalt Informational [Page 10] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Numeric Replies: + + ERR_NONICKNAMEGIVEN ERR_ERRONEUSNICKNAME + ERR_NICKNAMEINUSE ERR_NICKCOLLISION + ERR_UNAVAILRESOURCE ERR_RESTRICTED + + Examples: + + NICK Wiz ; Introducing new nick "Wiz" if session is + still unregistered, or user changing his + nickname to "Wiz" + + :WiZ!jto@tolsun.oulu.fi NICK Kilroy + ; Server telling that WiZ changed his + nickname to Kilroy. + +3.1.3 User message + + Command: USER + Parameters: + + The USER command is used at the beginning of connection to specify + the username, hostname and realname of a new user. + + The parameter should be a numeric, and can be used to + automatically set user modes when registering with the server. This + parameter is a bitmask, with only 2 bits having any signification: if + the bit 2 is set, the user mode 'w' will be set and if the bit 3 is + set, the user mode 'i' will be set. (See Section 3.1.5 "User + Modes"). + + The may contain space characters. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_ALREADYREGISTRED + + Example: + + USER guest 0 * :Ronnie Reagan ; User registering themselves with a + username of "guest" and real name + "Ronnie Reagan". + + USER guest 8 * :Ronnie Reagan ; User registering themselves with a + username of "guest" and real name + "Ronnie Reagan", and asking to be set + invisible. + + + + +Kalt Informational [Page 11] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +3.1.4 Oper message + + Command: OPER + Parameters: + + A normal user uses the OPER command to obtain operator privileges. + The combination of and are REQUIRED to gain + Operator privileges. Upon success, the user will receive a MODE + message (see section 3.1.5) indicating the new user modes. + + Numeric Replies: + + ERR_NEEDMOREPARAMS RPL_YOUREOPER + ERR_NOOPERHOST ERR_PASSWDMISMATCH + + Example: + + OPER foo bar ; Attempt to register as an operator + using a username of "foo" and "bar" + as the password. + +3.1.5 User mode message + + Command: MODE + Parameters: + *( ( "+" / "-" ) *( "i" / "w" / "o" / "O" / "r" ) ) + + The user MODE's are typically changes which affect either how the + client is seen by others or what 'extra' messages the client is sent. + + A user MODE command MUST only be accepted if both the sender of the + message and the nickname given as a parameter are both the same. If + no other parameter is given, then the server will return the current + settings for the nick. + + The available modes are as follows: + + a - user is flagged as away; + i - marks a users as invisible; + w - user receives wallops; + r - restricted user connection; + o - operator flag; + O - local operator flag; + s - marks a user for receipt of server notices. + + Additional modes may be available later on. + + + + + +Kalt Informational [Page 12] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + The flag 'a' SHALL NOT be toggled by the user using the MODE command, + instead use of the AWAY command is REQUIRED. + + If a user attempts to make themselves an operator using the "+o" or + "+O" flag, the attempt SHOULD be ignored as users could bypass the + authentication mechanisms of the OPER command. There is no + restriction, however, on anyone `deopping' themselves (using "-o" or + "-O"). + + On the other hand, if a user attempts to make themselves unrestricted + using the "-r" flag, the attempt SHOULD be ignored. There is no + restriction, however, on anyone `deopping' themselves (using "+r"). + This flag is typically set by the server upon connection for + administrative reasons. While the restrictions imposed are left up + to the implementation, it is typical that a restricted user not be + allowed to change nicknames, nor make use of the channel operator + status on channels. + + The flag 's' is obsolete but MAY still be used. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_USERSDONTMATCH + ERR_UMODEUNKNOWNFLAG RPL_UMODEIS + + Examples: + + MODE WiZ -w ; Command by WiZ to turn off + reception of WALLOPS messages. + + MODE Angel +i ; Command from Angel to make herself + invisible. + + MODE WiZ -o ; WiZ 'deopping' (removing operator + status). + +3.1.6 Service message + + Command: SERVICE + Parameters: + + + The SERVICE command to register a new service. Command parameters + specify the service nickname, distribution, type and info of a new + service. + + + + + + +Kalt Informational [Page 13] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + The parameter is used to specify the visibility of a + service. The service may only be known to servers which have a name + matching the distribution. For a matching server to have knowledge + of the service, the network path between that server and the server + on which the service is connected MUST be composed of servers which + names all match the mask. + + The parameter is currently reserved for future usage. + + Numeric Replies: + + ERR_ALREADYREGISTRED ERR_NEEDMOREPARAMS + ERR_ERRONEUSNICKNAME + RPL_YOURESERVICE RPL_YOURHOST + RPL_MYINFO + + Example: + + SERVICE dict * *.fr 0 0 :French Dictionary ; Service registering + itself with a name of "dict". This + service will only be available on + servers which name matches "*.fr". + +3.1.7 Quit + + Command: QUIT + Parameters: [ ] + + A client session is terminated with a quit message. The server + acknowledges this by sending an ERROR message to the client. + + Numeric Replies: + + None. + + Example: + + QUIT :Gone to have lunch ; Preferred message format. + + :syrk!kalt@millennium.stealth.net QUIT :Gone to have lunch ; User + syrk has quit IRC to have lunch. + + + + + + + + + + +Kalt Informational [Page 14] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +3.1.8 Squit + + Command: SQUIT + Parameters: + + The SQUIT command is available only to operators. It is used to + disconnect server links. Also servers can generate SQUIT messages on + error conditions. A SQUIT message may also target a remote server + connection. In this case, the SQUIT message will simply be sent to + the remote server without affecting the servers in between the + operator and the remote server. + + The SHOULD be supplied by all operators who execute a SQUIT + for a remote server. The server ordered to disconnect its peer + generates a WALLOPS message with included, so that other + users may be aware of the reason of this action. + + Numeric replies: + + ERR_NOPRIVILEGES ERR_NOSUCHSERVER + ERR_NEEDMOREPARAMS + + Examples: + + SQUIT tolsun.oulu.fi :Bad Link ? ; Command to uplink of the server + tolson.oulu.fi to terminate its + connection with comment "Bad Link". + + :Trillian SQUIT cm22.eng.umd.edu :Server out of control ; Command + from Trillian from to disconnect + "cm22.eng.umd.edu" from the net with + comment "Server out of control". + +3.2 Channel operations + + This group of messages is concerned with manipulating channels, their + properties (channel modes), and their contents (typically users). + For this reason, these messages SHALL NOT be made available to + services. + + All of these messages are requests which will or will not be granted + by the server. The server MUST send a reply informing the user + whether the request was granted, denied or generated an error. When + the server grants the request, the message is typically sent back + (eventually reformatted) to the user with the prefix set to the user + itself. + + + + + +Kalt Informational [Page 15] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + The rules governing how channels are managed are enforced by the + servers. These rules are beyond the scope of this document. More + details are found in "Internet Relay Chat: Channel Management" [IRC- + CHAN]. + +3.2.1 Join message + + Command: JOIN + Parameters: ( *( "," ) [ *( "," ) ] ) + / "0" + + The JOIN command is used by a user to request to start listening to + the specific channel. Servers MUST be able to parse arguments in the + form of a list of target, but SHOULD NOT use lists when sending JOIN + messages to clients. + + Once a user has joined a channel, he receives information about + all commands his server receives affecting the channel. This + includes JOIN, MODE, KICK, PART, QUIT and of course PRIVMSG/NOTICE. + This allows channel members to keep track of the other channel + members, as well as channel modes. + + If a JOIN is successful, the user receives a JOIN message as + confirmation and is then sent the channel's topic (using RPL_TOPIC) and + the list of users who are on the channel (using RPL_NAMREPLY), which + MUST include the user joining. + + Note that this message accepts a special argument ("0"), which is + a special request to leave all channels the user is currently a member + of. The server will process this message as if the user had sent + a PART command (See Section 3.2.2) for each channel he is a member + of. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_BANNEDFROMCHAN + ERR_INVITEONLYCHAN ERR_BADCHANNELKEY + ERR_CHANNELISFULL ERR_BADCHANMASK + ERR_NOSUCHCHANNEL ERR_TOOMANYCHANNELS + ERR_TOOMANYTARGETS ERR_UNAVAILRESOURCE + RPL_TOPIC + + Examples: + + JOIN #foobar ; Command to join channel #foobar. + + JOIN &foo fubar ; Command to join channel &foo using + key "fubar". + + + +Kalt Informational [Page 16] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + JOIN #foo,&bar fubar ; Command to join channel #foo using + key "fubar" and &bar using no key. + + JOIN #foo,#bar fubar,foobar ; Command to join channel #foo using + key "fubar", and channel #bar using + key "foobar". + + JOIN #foo,#bar ; Command to join channels #foo and + #bar. + + JOIN 0 ; Leave all currently joined + channels. + + :WiZ!jto@tolsun.oulu.fi JOIN #Twilight_zone ; JOIN message from WiZ + on channel #Twilight_zone + +3.2.2 Part message + + Command: PART + Parameters: *( "," ) [ ] + + The PART command causes the user sending the message to be removed + from the list of active members for all given channels listed in the + parameter string. If a "Part Message" is given, this will be sent + instead of the default message, the nickname. This request is always + granted by the server. + + Servers MUST be able to parse arguments in the form of a list of + target, but SHOULD NOT use lists when sending PART messages to + clients. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_NOSUCHCHANNEL + ERR_NOTONCHANNEL + + Examples: + + PART #twilight_zone ; Command to leave channel + "#twilight_zone" + + PART #oz-ops,&group5 ; Command to leave both channels + "&group5" and "#oz-ops". + + :WiZ!jto@tolsun.oulu.fi PART #playzone :I lost + ; User WiZ leaving channel + "#playzone" with the message "I + lost". + + + +Kalt Informational [Page 17] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +3.2.3 Channel mode message + + Command: MODE + Parameters: *( ( "-" / "+" ) * * ) + + The MODE command is provided so that users may query and change the + characteristics of a channel. For more details on available modes + and their uses, see "Internet Relay Chat: Channel Management" [IRC- + CHAN]. Note that there is a maximum limit of three (3) changes per + command for modes that take a parameter. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_KEYSET + ERR_NOCHANMODES ERR_CHANOPRIVSNEEDED + ERR_USERNOTINCHANNEL ERR_UNKNOWNMODE + RPL_CHANNELMODEIS + RPL_BANLIST RPL_ENDOFBANLIST + RPL_EXCEPTLIST RPL_ENDOFEXCEPTLIST + RPL_INVITELIST RPL_ENDOFINVITELIST + RPL_UNIQOPIS + + The following examples are given to help understanding the syntax of + the MODE command, but refer to modes defined in "Internet Relay Chat: + Channel Management" [IRC-CHAN]. + + Examples: + + MODE #Finnish +imI *!*@*.fi ; Command to make #Finnish channel + moderated and 'invite-only' with user + with a hostname matching *.fi + automatically invited. + + MODE #Finnish +o Kilroy ; Command to give 'chanop' privileges + to Kilroy on channel #Finnish. + + MODE #Finnish +v Wiz ; Command to allow WiZ to speak on + #Finnish. + + MODE #Fins -s ; Command to remove 'secret' flag + from channel #Fins. + + MODE #42 +k oulu ; Command to set the channel key to + "oulu". + + MODE #42 -k oulu ; Command to remove the "oulu" + channel key on channel "#42". + + + + +Kalt Informational [Page 18] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + MODE #eu-opers +l 10 ; Command to set the limit for the + number of users on channel + "#eu-opers" to 10. + + :WiZ!jto@tolsun.oulu.fi MODE #eu-opers -l + ; User "WiZ" removing the limit for + the number of users on channel "#eu- + opers". + + MODE &oulu +b ; Command to list ban masks set for + the channel "&oulu". + + MODE &oulu +b *!*@* ; Command to prevent all users from + joining. + + MODE &oulu +b *!*@*.edu +e *!*@*.bu.edu + ; Command to prevent any user from a + hostname matching *.edu from joining, + except if matching *.bu.edu + + MODE #bu +be *!*@*.edu *!*@*.bu.edu + ; Comment to prevent any user from a + hostname matching *.edu from joining, + except if matching *.bu.edu + + MODE #meditation e ; Command to list exception masks set + for the channel "#meditation". + + MODE #meditation I ; Command to list invitations masks + set for the channel "#meditation". + + MODE !12345ircd O ; Command to ask who the channel + creator for "!12345ircd" is + +3.2.4 Topic message + + Command: TOPIC + Parameters: [ ] + + The TOPIC command is used to change or view the topic of a channel. + The topic for channel is returned if there is no + given. If the parameter is present, the topic for that + channel will be changed, if this action is allowed for the user + requesting it. If the parameter is an empty string, the + topic for that channel will be removed. + + + + + + +Kalt Informational [Page 19] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_NOTONCHANNEL + RPL_NOTOPIC RPL_TOPIC + ERR_CHANOPRIVSNEEDED ERR_NOCHANMODES + + Examples: + + :WiZ!jto@tolsun.oulu.fi TOPIC #test :New topic ; User Wiz setting the + topic. + + TOPIC #test :another topic ; Command to set the topic on #test + to "another topic". + + TOPIC #test : ; Command to clear the topic on + #test. + + TOPIC #test ; Command to check the topic for + #test. + +3.2.5 Names message + + Command: NAMES + Parameters: [ *( "," ) [ ] ] + + By using the NAMES command, a user can list all nicknames that are + visible to him. For more details on what is visible and what is not, + see "Internet Relay Chat: Channel Management" [IRC-CHAN]. The + parameter specifies which channel(s) to return information + about. There is no error reply for bad channel names. + + If no parameter is given, a list of all channels and their + occupants is returned. At the end of this list, a list of users who + are visible but either not on any channel or not on a visible channel + are listed as being on `channel' "*". + + If the parameter is specified, the request is forwarded to + that server which will generate the reply. + + Wildcards are allowed in the parameter. + + Numerics: + + ERR_TOOMANYMATCHES ERR_NOSUCHSERVER + RPL_NAMREPLY RPL_ENDOFNAMES + + + + + + +Kalt Informational [Page 20] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Examples: + + NAMES #twilight_zone,#42 ; Command to list visible users on + #twilight_zone and #42 + + NAMES ; Command to list all visible + channels and users + +3.2.6 List message + + Command: LIST + Parameters: [ *( "," ) [ ] ] + + The list command is used to list channels and their topics. If the + parameter is used, only the status of that channel is + displayed. + + If the parameter is specified, the request is forwarded to + that server which will generate the reply. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_TOOMANYMATCHES ERR_NOSUCHSERVER + RPL_LIST RPL_LISTEND + + Examples: + + LIST ; Command to list all channels. + + LIST #twilight_zone,#42 ; Command to list channels + #twilight_zone and #42 + +3.2.7 Invite message + + Command: INVITE + Parameters: + + The INVITE command is used to invite a user to a channel. The + parameter is the nickname of the person to be invited to + the target channel . There is no requirement that the + channel the target user is being invited to must exist or be a valid + channel. However, if the channel exists, only members of the channel + are allowed to invite other users. When the channel has invite-only + flag set, only channel operators may issue INVITE command. + + + + + +Kalt Informational [Page 21] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Only the user inviting and the user being invited will receive + notification of the invitation. Other channel members are not + notified. (This is unlike the MODE changes, and is occasionally the + source of trouble for users.) + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_NOSUCHNICK + ERR_NOTONCHANNEL ERR_USERONCHANNEL + ERR_CHANOPRIVSNEEDED + RPL_INVITING RPL_AWAY + + Examples: + + :Angel!wings@irc.org INVITE Wiz #Dust + + ; Message to WiZ when he has been + invited by user Angel to channel + #Dust + + INVITE Wiz #Twilight_Zone ; Command to invite WiZ to + #Twilight_zone + +3.2.8 Kick command + + Command: KICK + Parameters: *( "," ) *( "," ) + [] + + The KICK command can be used to request the forced removal of a user + from a channel. It causes the to PART from the by + force. For the message to be syntactically correct, there MUST be + either one channel parameter and multiple user parameter, or as many + channel parameters as there are user parameters. If a "comment" is + given, this will be sent instead of the default message, the nickname + of the user issuing the KICK. + + The server MUST NOT send KICK messages with multiple channels or + users to clients. This is necessarily to maintain backward + compatibility with old client software. + + Numeric Replies: + + ERR_NEEDMOREPARAMS ERR_NOSUCHCHANNEL + ERR_BADCHANMASK ERR_CHANOPRIVSNEEDED + ERR_USERNOTINCHANNEL ERR_NOTONCHANNEL + + + + + +Kalt Informational [Page 22] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Examples: + + KICK &Melbourne Matthew ; Command to kick Matthew from + &Melbourne + + KICK #Finnish John :Speaking English + ; Command to kick John from #Finnish + using "Speaking English" as the + reason (comment). + + :WiZ!jto@tolsun.oulu.fi KICK #Finnish John + ; KICK message on channel #Finnish + from WiZ to remove John from channel + +3.3 Sending messages + + The main purpose of the IRC protocol is to provide a base for clients + to communicate with each other. PRIVMSG, NOTICE and SQUERY + (described in Section 3.5 on Service Query and Commands) are the only + messages available which actually perform delivery of a text message + from one client to another - the rest just make it possible and try + to ensure it happens in a reliable and structured manner. + +3.3.1 Private messages + + Command: PRIVMSG + Parameters: + + PRIVMSG is used to send private messages between users, as well as to + send messages to channels. is usually the nickname of + the recipient of the message, or a channel name. + + The parameter may also be a host mask (#) or server + mask ($). In both cases the server will only send the PRIVMSG + to those who have a server or host matching the mask. The mask MUST + have at least 1 (one) "." in it and no wildcards following the last + ".". This requirement exists to prevent people sending messages to + "#*" or "$*", which would broadcast to all users. Wildcards are the + '*' and '?' characters. This extension to the PRIVMSG command is + only available to operators. + + Numeric Replies: + + ERR_NORECIPIENT ERR_NOTEXTTOSEND + ERR_CANNOTSENDTOCHAN ERR_NOTOPLEVEL + ERR_WILDTOPLEVEL ERR_TOOMANYTARGETS + ERR_NOSUCHNICK + RPL_AWAY + + + +Kalt Informational [Page 23] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Examples: + + :Angel!wings@irc.org PRIVMSG Wiz :Are you receiving this message ? + ; Message from Angel to Wiz. + + PRIVMSG Angel :yes I'm receiving it ! + ; Command to send a message to Angel. + + PRIVMSG jto@tolsun.oulu.fi :Hello ! + ; Command to send a message to a user + on server tolsun.oulu.fi with + username of "jto". + + PRIVMSG kalt%millennium.stealth.net@irc.stealth.net :Are you a frog? + ; Message to a user on server + irc.stealth.net with username of + "kalt", and connected from the host + millennium.stealth.net. + + PRIVMSG kalt%millennium.stealth.net :Do you like cheese? + ; Message to a user on the local + server with username of "kalt", and + connected from the host + millennium.stealth.net. + + PRIVMSG Wiz!jto@tolsun.oulu.fi :Hello ! + ; Message to the user with nickname + Wiz who is connected from the host + tolsun.oulu.fi and has the username + "jto". + + PRIVMSG $*.fi :Server tolsun.oulu.fi rebooting. + ; Message to everyone on a server + which has a name matching *.fi. + + PRIVMSG #*.edu :NSFNet is undergoing work, expect interruptions + ; Message to all users who come from + a host which has a name matching + *.edu. + +3.3.2 Notice + + Command: NOTICE + Parameters: + + The NOTICE command is used similarly to PRIVMSG. The difference + between NOTICE and PRIVMSG is that automatic replies MUST NEVER be + sent in response to a NOTICE message. This rule applies to servers + + + +Kalt Informational [Page 24] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + too - they MUST NOT send any error reply back to the client on + receipt of a notice. The object of this rule is to avoid loops + between clients automatically sending something in response to + something it received. + + This command is available to services as well as users. + + This is typically used by services, and automatons (clients with + either an AI or other interactive program controlling their actions). + + See PRIVMSG for more details on replies and examples. + +3.4 Server queries and commands + + The server query group of commands has been designed to return + information about any server which is connected to the network. + + In these queries, where a parameter appears as , wildcard + masks are usually valid. For each parameter, however, only one query + and set of replies is to be generated. In most cases, if a nickname + is given, it will mean the server to which the user is connected. + + These messages typically have little value for services, it is + therefore RECOMMENDED to forbid services from using them. + +3.4.1 Motd message + + Command: MOTD + Parameters: [ ] + + The MOTD command is used to get the "Message Of The Day" of the given + server, or current server if is omitted. + + Wildcards are allowed in the parameter. + + Numeric Replies: + RPL_MOTDSTART RPL_MOTD + RPL_ENDOFMOTD ERR_NOMOTD + +3.4.2 Lusers message + + Command: LUSERS + Parameters: [ [ ] ] + + The LUSERS command is used to get statistics about the size of the + IRC network. If no parameter is given, the reply will be about the + whole net. If a is specified, then the reply will only + + + + +Kalt Informational [Page 25] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + concern the part of the network formed by the servers matching the + mask. Finally, if the parameter is specified, the request + is forwarded to that server which will generate the reply. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + RPL_LUSERCLIENT RPL_LUSEROP + RPL_LUSERUNKOWN RPL_LUSERCHANNELS + RPL_LUSERME ERR_NOSUCHSERVER + +3.4.3 Version message + + Command: VERSION + Parameters: [ ] + + The VERSION command is used to query the version of the server + program. An optional parameter is used to query the version + of the server program which a client is not directly connected to. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER RPL_VERSION + + Examples: + + VERSION tolsun.oulu.fi ; Command to check the version of + server "tolsun.oulu.fi". + +3.4.4 Stats message + + Command: STATS + Parameters: [ [ ] ] + + The stats command is used to query statistics of certain server. If + parameter is omitted, only the end of stats reply is sent + back. + + A query may be given for any single letter which is only checked by + the destination server and is otherwise passed on by intermediate + servers, ignored and unaltered. + + Wildcards are allowed in the parameter. + + + + + +Kalt Informational [Page 26] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Except for the ones below, the list of valid queries is + implementation dependent. The standard queries below SHOULD be + supported by the server: + + l - returns a list of the server's connections, showing how + long each connection has been established and the + traffic over that connection in Kbytes and messages for + each direction; + m - returns the usage count for each of commands supported + by the server; commands for which the usage count is + zero MAY be omitted; + o - returns a list of configured privileged users, + operators; + u - returns a string showing how long the server has been + up. + + It is also RECOMMENDED that client and server access configuration be + published this way. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_STATSLINKINFO RPL_STATSUPTIME + RPL_STATSCOMMANDS RPL_STATSOLINE + RPL_ENDOFSTATS + + Examples: + + STATS m ; Command to check the command usage + for the server you are connected to + +3.4.5 Links message + + Command: LINKS + Parameters: [ [ ] ] + + With LINKS, a user can list all servernames, which are known by the + server answering the query. The returned list of servers MUST match + the mask, or if no mask is given, the full list is returned. + + If is given in addition to , the LINKS + command is forwarded to the first server found that matches that name + (if any), and that server is then required to answer the query. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_LINKS RPL_ENDOFLINKS + + + +Kalt Informational [Page 27] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Examples: + + LINKS *.au ; Command to list all servers which + have a name that matches *.au; + + LINKS *.edu *.bu.edu ; Command to list servers matching + *.bu.edu as seen by the first server + matching *.edu. + +3.4.6 Time message + + Command: TIME + Parameters: [ ] + + The time command is used to query local time from the specified + server. If the parameter is not given, the server receiving + the command must reply to the query. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER RPL_TIME + + Examples: + TIME tolsun.oulu.fi ; check the time on the server + "tolson.oulu.fi" + +3.4.7 Connect message + + Command: CONNECT + Parameters: [ ] + + The CONNECT command can be used to request a server to try to + establish a new connection to another server immediately. CONNECT is + a privileged command and SHOULD be available only to IRC Operators. + If a is given and its mask doesn't match name of the + parsing server, the CONNECT attempt is sent to the first match of + remote server. Otherwise the CONNECT attempt is made by the server + processing the request. + + The server receiving a remote CONNECT command SHOULD generate a + WALLOPS message describing the source and target of the request. + + Numeric Replies: + + ERR_NOSUCHSERVER ERR_NOPRIVILEGES + ERR_NEEDMOREPARAMS + + + +Kalt Informational [Page 28] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Examples: + + CONNECT tolsun.oulu.fi 6667 ; Command to attempt to connect local + server to tolsun.oulu.fi on port 6667 + +3.4.8 Trace message + + Command: TRACE + Parameters: [ ] + + TRACE command is used to find the route to specific server and + information about its peers. Each server that processes this command + MUST report to the sender about it. The replies from pass-through + links form a chain, which shows route to destination. After sending + this reply back, the query MUST be sent to the next server until + given server is reached. + + TRACE command is used to find the route to specific server. Each + server that processes this message MUST tell the sender about it by + sending a reply indicating it is a pass-through link, forming a chain + of replies. After sending this reply back, it MUST then send the + TRACE message to the next server until given server is reached. If + the parameter is omitted, it is RECOMMENDED that TRACE + command sends a message to the sender telling which servers the local + server has direct connection to. + + If the destination given by is an actual server, the + destination server is REQUIRED to report all servers, services and + operators which are connected to it; if the command was issued by an + operator, the server MAY also report all users which are connected to + it. If the destination given by is a nickname, then only a + reply for that nickname is given. If the parameter is + omitted, it is RECOMMENDED that the TRACE command is parsed as + targeted to the processing server. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER + + If the TRACE message is destined for another server, all + intermediate servers must return a RPL_TRACELINK reply to indicate + that the TRACE passed through it and where it is going next. + + RPL_TRACELINK + + + + + +Kalt Informational [Page 29] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + A TRACE reply may be composed of any number of the following + numeric replies. + + RPL_TRACECONNECTING RPL_TRACEHANDSHAKE + RPL_TRACEUNKNOWN RPL_TRACEOPERATOR + RPL_TRACEUSER RPL_TRACESERVER + RPL_TRACESERVICE RPL_TRACENEWTYPE + RPL_TRACECLASS RPL_TRACELOG + RPL_TRACEEND + + Examples: + + TRACE *.oulu.fi ; TRACE to a server matching + *.oulu.fi + +3.4.9 Admin command + + Command: ADMIN + Parameters: [ ] + + The admin command is used to find information about the administrator + of the given server, or current server if parameter is + omitted. Each server MUST have the ability to forward ADMIN messages + to other servers. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_ADMINME RPL_ADMINLOC1 + RPL_ADMINLOC2 RPL_ADMINEMAIL + + Examples: + + ADMIN tolsun.oulu.fi ; request an ADMIN reply from + tolsun.oulu.fi + + ADMIN syrk ; ADMIN request for the server to + which the user syrk is connected + + + + + + + + + + + +Kalt Informational [Page 30] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +3.4.10 Info command + + Command: INFO + Parameters: [ ] + + The INFO command is REQUIRED to return information describing the + server: its version, when it was compiled, the patchlevel, when it + was started, and any other miscellaneous information which may be + considered to be relevant. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_INFO RPL_ENDOFINFO + + Examples: + + INFO csd.bu.edu ; request an INFO reply from + csd.bu.edu + + INFO Angel ; request info from the server that + Angel is connected to. + +3.5 Service Query and Commands + + The service query group of commands has been designed to return + information about any service which is connected to the network. + +3.5.1 Servlist message + + Command: SERVLIST + Parameters: [ [ ] ] + + The SERVLIST command is used to list services currently connected to + the network and visible to the user issuing the command. The + optional parameters may be used to restrict the result of the query + (to matching services names, and services type). + + Numeric Replies: + + RPL_SERVLIST RPL_SERVLISTEND + + + + + + + + +Kalt Informational [Page 31] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +3.5.2 Squery + + Command: SQUERY + Parameters: + + The SQUERY command is used similarly to PRIVMSG. The only difference + is that the recipient MUST be a service. This is the only way for a + text message to be delivered to a service. + + See PRIVMSG for more details on replies and example. + + Examples: + + SQUERY irchelp :HELP privmsg + ; Message to the service with + nickname irchelp. + + SQUERY dict@irc.fr :fr2en blaireau + ; Message to the service with name + dict@irc.fr. + +3.6 User based queries + + User queries are a group of commands which are primarily concerned + with finding details on a particular user or group users. When using + wildcards with any of these commands, if they match, they will only + return information on users who are 'visible' to you. The visibility + of a user is determined as a combination of the user's mode and the + common set of channels you are both on. + + Although services SHOULD NOT be using this class of message, they are + allowed to. + +3.6.1 Who query + + Command: WHO + Parameters: [ [ "o" ] ] + + The WHO command is used by a client to generate a query which returns + a list of information which 'matches' the parameter given by + the client. In the absence of the parameter, all visible + (users who aren't invisible (user mode +i) and who don't have a + common channel with the requesting client) are listed. The same + result can be achieved by using a of "0" or any wildcard which + will end up matching every visible user. + + The passed to WHO is matched against users' host, server, real + name and nickname if the channel cannot be found. + + + +Kalt Informational [Page 32] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + If the "o" parameter is passed only operators are returned according + to the supplied. + + Numeric Replies: + + ERR_NOSUCHSERVER + RPL_WHOREPLY RPL_ENDOFWHO + + Examples: + + WHO *.fi ; Command to list all users who match + against "*.fi". + + WHO jto* o ; Command to list all users with a + match against "jto*" if they are an + operator. + +3.6.2 Whois query + + Command: WHOIS + Parameters: [ ] *( "," ) + + This command is used to query information about particular user. + The server will answer this command with several numeric messages + indicating different statuses of each user which matches the mask (if + you are entitled to see them). If no wildcard is present in the + , any information about that nick which you are allowed to see + is presented. + + If the parameter is specified, it sends the query to a + specific server. It is useful if you want to know how long the user + in question has been idle as only local server (i.e., the server the + user is directly connected to) knows that information, while + everything else is globally known. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NOSUCHSERVER ERR_NONICKNAMEGIVEN + RPL_WHOISUSER RPL_WHOISCHANNELS + RPL_WHOISCHANNELS RPL_WHOISSERVER + RPL_AWAY RPL_WHOISOPERATOR + RPL_WHOISIDLE ERR_NOSUCHNICK + RPL_ENDOFWHOIS + + + + + + +Kalt Informational [Page 33] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Examples: + + WHOIS wiz ; return available user information + about nick WiZ + + WHOIS eff.org trillian ; ask server eff.org for user + information about trillian + +3.6.3 Whowas + + Command: WHOWAS + Parameters: *( "," ) [ [ ] ] + + Whowas asks for information about a nickname which no longer exists. + This may either be due to a nickname change or the user leaving IRC. + In response to this query, the server searches through its nickname + history, looking for any nicks which are lexically the same (no wild + card matching here). The history is searched backward, returning the + most recent entry first. If there are multiple entries, up to + replies will be returned (or all of them if no + parameter is given). If a non-positive number is passed as being + , then a full search is done. + + Wildcards are allowed in the parameter. + + Numeric Replies: + + ERR_NONICKNAMEGIVEN ERR_WASNOSUCHNICK + RPL_WHOWASUSER RPL_WHOISSERVER + RPL_ENDOFWHOWAS + + Examples: + + WHOWAS Wiz ; return all information in the nick + history about nick "WiZ"; + + WHOWAS Mermaid 9 ; return at most, the 9 most recent + entries in the nick history for + "Mermaid"; + + WHOWAS Trillian 1 *.edu ; return the most recent history for + "Trillian" from the first server + found to match "*.edu". + +3.7 Miscellaneous messages + + Messages in this category do not fit into any of the above categories + but are nonetheless still a part of and REQUIRED by the protocol. + + + +Kalt Informational [Page 34] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +3.7.1 Kill message + + Command: KILL + Parameters: + + The KILL command is used to cause a client-server connection to be + closed by the server which has the actual connection. Servers + generate KILL messages on nickname collisions. It MAY also be + available available to users who have the operator status. + + Clients which have automatic reconnect algorithms effectively make + this command useless since the disconnection is only brief. It does + however break the flow of data and can be used to stop large amounts + of 'flooding' from abusive users or accidents. Abusive users usually + don't care as they will reconnect promptly and resume their abusive + behaviour. To prevent this command from being abused, any user may + elect to receive KILL messages generated for others to keep an 'eye' + on would be trouble spots. + + In an arena where nicknames are REQUIRED to be globally unique at all + times, KILL messages are sent whenever 'duplicates' are detected + (that is an attempt to register two users with the same nickname) in + the hope that both of them will disappear and only 1 reappear. + + When a client is removed as the result of a KILL message, the server + SHOULD add the nickname to the list of unavailable nicknames in an + attempt to avoid clients to reuse this name immediately which is + usually the pattern of abusive behaviour often leading to useless + "KILL loops". See the "IRC Server Protocol" document [IRC-SERVER] + for more information on this procedure. + + The comment given MUST reflect the actual reason for the KILL. For + server-generated KILLs it usually is made up of details concerning + the origins of the two conflicting nicknames. For users it is left + up to them to provide an adequate reason to satisfy others who see + it. To prevent/discourage fake KILLs from being generated to hide + the identify of the KILLer, the comment also shows a 'kill-path' + which is updated by each server it passes through, each prepending + its name to the path. + + Numeric Replies: + + ERR_NOPRIVILEGES ERR_NEEDMOREPARAMS + ERR_NOSUCHNICK ERR_CANTKILLSERVER + + + + + + + +Kalt Informational [Page 35] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + NOTE: + It is RECOMMENDED that only Operators be allowed to kill other users + with KILL command. This command has been the subject of many + controversies over the years, and along with the above + recommendation, it is also widely recognized that not even operators + should be allowed to kill users on remote servers. + +3.7.2 Ping message + + Command: PING + Parameters: [ ] + + The PING command is used to test the presence of an active client or + server at the other end of the connection. Servers send a PING + message at regular intervals if no other activity detected coming + from a connection. If a connection fails to respond to a PING + message within a set amount of time, that connection is closed. A + PING message MAY be sent even if the connection is active. + + When a PING message is received, the appropriate PONG message MUST be + sent as reply to (server which sent the PING message out) + as soon as possible. If the parameter is specified, it + represents the target of the ping, and the message gets forwarded + there. + + Numeric Replies: + + ERR_NOORIGIN ERR_NOSUCHSERVER + + Examples: + + PING tolsun.oulu.fi ; Command to send a PING message to + server + + PING WiZ tolsun.oulu.fi ; Command from WiZ to send a PING + message to server "tolsun.oulu.fi" + + PING :irc.funet.fi ; Ping message sent by server + "irc.funet.fi" + + + + + + + + + + + + +Kalt Informational [Page 36] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +3.7.3 Pong message + + Command: PONG + Parameters: [ ] + + PONG message is a reply to ping message. If parameter is + given, this message MUST be forwarded to given target. The + parameter is the name of the entity who has responded to PING message + and generated this message. + + Numeric Replies: + + ERR_NOORIGIN ERR_NOSUCHSERVER + + Example: + + PONG csd.bu.edu tolsun.oulu.fi ; PONG message from csd.bu.edu to + tolsun.oulu.fi + +3.7.4 Error + + Command: ERROR + Parameters: + + The ERROR command is for use by servers when reporting a serious or + fatal error to its peers. It may also be sent from one server to + another but MUST NOT be accepted from any normal unknown clients. + + Only an ERROR message SHOULD be used for reporting errors which occur + with a server-to-server link. An ERROR message is sent to the server + at the other end (which reports it to appropriate local users and + logs) and to appropriate local users and logs. It is not to be + passed onto any other servers by a server if it is received from a + server. + + The ERROR message is also used before terminating a client + connection. + + When a server sends a received ERROR message to its operators, the + message SHOULD be encapsulated inside a NOTICE message, indicating + that the client was not responsible for the error. + + Numerics: + + None. + + + + + + +Kalt Informational [Page 37] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Examples: + + ERROR :Server *.fi already exists ; ERROR message to the other server + which caused this error. + + NOTICE WiZ :ERROR from csd.bu.edu -- Server *.fi already exists + ; Same ERROR message as above but + sent to user WiZ on the other server. + +4. Optional features + + This section describes OPTIONAL messages. They are not required in a + working server implementation of the protocol described herein. In + the absence of the feature, an error reply message MUST be generated + or an unknown command error. If the message is destined for another + server to answer then it MUST be passed on (elementary parsing + REQUIRED) The allocated numerics for this are listed with the + messages below. + + From this section, only the USERHOST and ISON messages are available + to services. + +4.1 Away + + Command: AWAY + Parameters: [ ] + + With the AWAY command, clients can set an automatic reply string for + any PRIVMSG commands directed at them (not to a channel they are on). + The server sends an automatic reply to the client sending the PRIVMSG + command. The only replying server is the one to which the sending + client is connected to. + + The AWAY command is used either with one parameter, to set an AWAY + message, or with no parameters, to remove the AWAY message. + + Because of its high cost (memory and bandwidth wise), the AWAY + message SHOULD only be used for client-server communication. A + server MAY choose to silently ignore AWAY messages received from + other servers. To update the away status of a client across servers, + the user mode 'a' SHOULD be used instead. (See Section 3.1.5) + + Numeric Replies: + + RPL_UNAWAY RPL_NOWAWAY + + + + + + +Kalt Informational [Page 38] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Example: + + AWAY :Gone to lunch. Back in 5 ; Command to set away message to + "Gone to lunch. Back in 5". + +4.2 Rehash message + + Command: REHASH + Parameters: None + + The rehash command is an administrative command which can be used by + an operator to force the server to re-read and process its + configuration file. + + Numeric Replies: + + RPL_REHASHING ERR_NOPRIVILEGES + + + Example: + + REHASH ; message from user with operator + status to server asking it to reread + its configuration file. + +4.3 Die message + + Command: DIE + Parameters: None + + An operator can use the DIE command to shutdown the server. This + message is optional since it may be viewed as a risk to allow + arbitrary people to connect to a server as an operator and execute + this command. + + The DIE command MUST always be fully processed by the server to which + the sending client is connected and MUST NOT be passed onto other + connected servers. + + Numeric Replies: + + ERR_NOPRIVILEGES + + Example: + + DIE ; no parameters required. + + + + + +Kalt Informational [Page 39] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + +4.4 Restart message + + Command: RESTART + Parameters: None + + An operator can use the restart command to force the server to + restart itself. This message is optional since it may be viewed as a + risk to allow arbitrary people to connect to a server as an operator + and execute this command, causing (at least) a disruption to service. + + The RESTART command MUST always be fully processed by the server to + which the sending client is connected and MUST NOT be passed onto + other connected servers. + + Numeric Replies: + + ERR_NOPRIVILEGES + + Example: + + RESTART ; no parameters required. + +4.5 Summon message + + Command: SUMMON + Parameters: [ [ ] ] + + The SUMMON command can be used to give users who are on a host + running an IRC server a message asking them to please join IRC. This + message is only sent if the target server (a) has SUMMON enabled, (b) + the user is logged in and (c) the server process can write to the + user's tty (or similar). + + If no parameter is given it tries to summon from the + server the client is connected to is assumed as the target. + + If summon is not enabled in a server, it MUST return the + ERR_SUMMONDISABLED numeric. + + Numeric Replies: + + ERR_NORECIPIENT ERR_FILEERROR + ERR_NOLOGIN ERR_NOSUCHSERVER + ERR_SUMMONDISABLED RPL_SUMMONING + + + + + + + +Kalt Informational [Page 40] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + Examples: + + SUMMON jto ; summon user jto on the server's + host + + SUMMON jto tolsun.oulu.fi ; summon user jto on the host which a + server named "tolsun.oulu.fi" is + running. + +4.6 Users + + Command: USERS + Parameters: [ ] + + The USERS command returns a list of users logged into the server in a + format similar to the UNIX commands who(1), rusers(1) and finger(1). + If disabled, the correct numeric MUST be returned to indicate this. + + Because of the security implications of such a command, it SHOULD be + disabled by default in server implementations. Enabling it SHOULD + require recompiling the server or some equivalent change rather than + simply toggling an option and restarting the server. The procedure + to enable this command SHOULD also include suitable large comments. + + Numeric Replies: + + ERR_NOSUCHSERVER ERR_FILEERROR + RPL_USERSSTART RPL_USERS + RPL_NOUSERS RPL_ENDOFUSERS + ERR_USERSDISABLED + + Disabled Reply: + + ERR_USERSDISABLED + + Example: + + USERS eff.org ; request a list of users logged in + on server eff.org + +4.7 Operwall message + + Command: WALLOPS + Parameters: + + The WALLOPS command is used to send a message to all currently + connected users who have set the 'w' user mode for themselves. (See + Section 3.1.5 "User modes"). + + + +Kalt Informational [Page 41] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + After implementing WALLOPS as a user command it was found that it was + often and commonly abused as a means of sending a message to a lot of + people. Due to this, it is RECOMMENDED that the implementation of + WALLOPS allows and recognizes only servers as the originators of + WALLOPS. + + Numeric Replies: + + ERR_NEEDMOREPARAMS + + Example: + + :csd.bu.edu WALLOPS :Connect '*.uiuc.edu 6667' from Joshua ; WALLOPS + message from csd.bu.edu announcing a + CONNECT message it received from + Joshua and acted upon. + +4.8 Userhost message + + Command: USERHOST + Parameters: *( SPACE ) + + The USERHOST command takes a list of up to 5 nicknames, each + separated by a space character and returns a list of information + about each nickname that it found. The returned list has each reply + separated by a space. + + Numeric Replies: + + RPL_USERHOST ERR_NEEDMOREPARAMS + + Example: + + USERHOST Wiz Michael syrk ; USERHOST request for information on + nicks "Wiz", "Michael", and "syrk" + + :ircd.stealth.net 302 yournick :syrk=+syrk@millennium.stealth.net + ; Reply for user syrk + +4.9 Ison message + + Command: ISON + Parameters: *( SPACE ) + + The ISON command was implemented to provide a quick and efficient + means to get a response about whether a given nickname was currently + on IRC. ISON only takes one (1) type of parameter: a space-separated + list of nicks. For each nickname in the list that is present, the + + + +Kalt Informational [Page 42] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + server adds that to its reply string. Thus the reply string may + return empty (none of the given nicks are present), an exact copy of + the parameter string (all of them present) or any other subset of the + set of nicks given in the parameter. The only limit on the number of + nicks that may be checked is that the combined length MUST NOT be too + large as to cause the server to chop it off so it fits in 512 + characters. + + ISON is only processed by the server local to the client sending the + command and thus not passed onto other servers for further + processing. + + Numeric Replies: + + RPL_ISON ERR_NEEDMOREPARAMS + + Example: + + ISON phone trillian WiZ jarlek Avalon Angel Monstah syrk + ; Sample ISON request for 7 nicks. + +5. Replies + + The following is a list of numeric replies which are generated in + response to the commands given above. Each numeric is given with its + number, name and reply string. + +5.1 Command responses + + Numerics in the range from 001 to 099 are used for client-server + connections only and should never travel between servers. Replies + generated in the response to commands are found in the range from 200 + to 399. + + 001 RPL_WELCOME + "Welcome to the Internet Relay Network + !@" + 002 RPL_YOURHOST + "Your host is , running version " + 003 RPL_CREATED + "This server was created " + 004 RPL_MYINFO + " + " + + - The server sends Replies 001 to 004 to a user upon + successful registration. + + + + +Kalt Informational [Page 43] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 005 RPL_BOUNCE + "Try server , port " + + - Sent by the server to a user to suggest an alternative + server. This is often used when the connection is + refused because the server is already full. + + 302 RPL_USERHOST + ":*1 *( " " )" + + - Reply format used by USERHOST to list replies to + the query list. The reply string is composed as + follows: + + reply = nickname [ "*" ] "=" ( "+" / "-" ) hostname + + The '*' indicates whether the client has registered + as an Operator. The '-' or '+' characters represent + whether the client has set an AWAY message or not + respectively. + + 303 RPL_ISON + ":*1 *( " " )" + + - Reply format used by ISON to list replies to the + query list. + + 301 RPL_AWAY + " :" + 305 RPL_UNAWAY + ":You are no longer marked as being away" + 306 RPL_NOWAWAY + ":You have been marked as being away" + + - These replies are used with the AWAY command (if + allowed). RPL_AWAY is sent to any client sending a + PRIVMSG to a client which is away. RPL_AWAY is only + sent by the server to which the client is connected. + Replies RPL_UNAWAY and RPL_NOWAWAY are sent when the + client removes and sets an AWAY message. + + 311 RPL_WHOISUSER + " * :" + 312 RPL_WHOISSERVER + " :" + 313 RPL_WHOISOPERATOR + " :is an IRC operator" + + + + +Kalt Informational [Page 44] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 317 RPL_WHOISIDLE + " :seconds idle" + 318 RPL_ENDOFWHOIS + " :End of WHOIS list" + 319 RPL_WHOISCHANNELS + " :*( ( "@" / "+" ) " " )" + + - Replies 311 - 313, 317 - 319 are all replies + generated in response to a WHOIS message. Given that + there are enough parameters present, the answering + server MUST either formulate a reply out of the above + numerics (if the query nick is found) or return an + error reply. The '*' in RPL_WHOISUSER is there as + the literal character and not as a wild card. For + each reply set, only RPL_WHOISCHANNELS may appear + more than once (for long lists of channel names). + The '@' and '+' characters next to the channel name + indicate whether a client is a channel operator or + has been granted permission to speak on a moderated + channel. The RPL_ENDOFWHOIS reply is used to mark + the end of processing a WHOIS message. + + 314 RPL_WHOWASUSER + " * :" + 369 RPL_ENDOFWHOWAS + " :End of WHOWAS" + + - When replying to a WHOWAS message, a server MUST use + the replies RPL_WHOWASUSER, RPL_WHOISSERVER or + ERR_WASNOSUCHNICK for each nickname in the presented + list. At the end of all reply batches, there MUST + be RPL_ENDOFWHOWAS (even if there was only one reply + and it was an error). + + 321 RPL_LISTSTART + Obsolete. Not used. + + 322 RPL_LIST + " <# visible> :" + 323 RPL_LISTEND + ":End of LIST" + + - Replies RPL_LIST, RPL_LISTEND mark the actual replies + with data and end of the server's response to a LIST + command. If there are no channels available to return, + only the end reply MUST be sent. + + + + + +Kalt Informational [Page 45] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 325 RPL_UNIQOPIS + " " + + 324 RPL_CHANNELMODEIS + " " + + 331 RPL_NOTOPIC + " :No topic is set" + 332 RPL_TOPIC + " :" + + - When sending a TOPIC message to determine the + channel topic, one of two replies is sent. If + the topic is set, RPL_TOPIC is sent back else + RPL_NOTOPIC. + + 341 RPL_INVITING + " " + + - Returned by the server to indicate that the + attempted INVITE message was successful and is + being passed onto the end client. + + 342 RPL_SUMMONING + " :Summoning user to IRC" + + - Returned by a server answering a SUMMON message to + indicate that it is summoning that user. + + 346 RPL_INVITELIST + " " + 347 RPL_ENDOFINVITELIST + " :End of channel invite list" + + - When listing the 'invitations masks' for a given channel, + a server is required to send the list back using the + RPL_INVITELIST and RPL_ENDOFINVITELIST messages. A + separate RPL_INVITELIST is sent for each active mask. + After the masks have been listed (or if none present) a + RPL_ENDOFINVITELIST MUST be sent. + + 348 RPL_EXCEPTLIST + " " + 349 RPL_ENDOFEXCEPTLIST + " :End of channel exception list" + + + + + + +Kalt Informational [Page 46] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + - When listing the 'exception masks' for a given channel, + a server is required to send the list back using the + RPL_EXCEPTLIST and RPL_ENDOFEXCEPTLIST messages. A + separate RPL_EXCEPTLIST is sent for each active mask. + After the masks have been listed (or if none present) + a RPL_ENDOFEXCEPTLIST MUST be sent. + + 351 RPL_VERSION + ". :" + + - Reply by the server showing its version details. + The is the version of the software being + used (including any patchlevel revisions) and the + is used to indicate if the server is + running in "debug mode". + + The "comments" field may contain any comments about + the version or further version details. + + 352 RPL_WHOREPLY + " + ( "H" / "G" > ["*"] [ ( "@" / "+" ) ] + : " + + 315 RPL_ENDOFWHO + " :End of WHO list" + + - The RPL_WHOREPLY and RPL_ENDOFWHO pair are used + to answer a WHO message. The RPL_WHOREPLY is only + sent if there is an appropriate match to the WHO + query. If there is a list of parameters supplied + with a WHO message, a RPL_ENDOFWHO MUST be sent + after processing each list item with being + the item. + + 353 RPL_NAMREPLY + "( "=" / "*" / "@" ) + :[ "@" / "+" ] *( " " [ "@" / "+" ] ) + - "@" is used for secret channels, "*" for private + channels, and "=" for others (public channels). + + 366 RPL_ENDOFNAMES + " :End of NAMES list" + + - To reply to a NAMES message, a reply pair consisting + of RPL_NAMREPLY and RPL_ENDOFNAMES is sent by the + server back to the client. If there is no channel + found as in the query, then only RPL_ENDOFNAMES is + + + +Kalt Informational [Page 47] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + returned. The exception to this is when a NAMES + message is sent with no parameters and all visible + channels and contents are sent back in a series of + RPL_NAMEREPLY messages with a RPL_ENDOFNAMES to mark + the end. + + 364 RPL_LINKS + " : " + 365 RPL_ENDOFLINKS + " :End of LINKS list" + + - In replying to the LINKS message, a server MUST send + replies back using the RPL_LINKS numeric and mark the + end of the list using an RPL_ENDOFLINKS reply. + + 367 RPL_BANLIST + " " + 368 RPL_ENDOFBANLIST + " :End of channel ban list" + + - When listing the active 'bans' for a given channel, + a server is required to send the list back using the + RPL_BANLIST and RPL_ENDOFBANLIST messages. A separate + RPL_BANLIST is sent for each active banmask. After the + banmasks have been listed (or if none present) a + RPL_ENDOFBANLIST MUST be sent. + + 371 RPL_INFO + ":" + 374 RPL_ENDOFINFO + ":End of INFO list" + + - A server responding to an INFO message is required to + send all its 'info' in a series of RPL_INFO messages + with a RPL_ENDOFINFO reply to indicate the end of the + replies. + + 375 RPL_MOTDSTART + ":- Message of the day - " + 372 RPL_MOTD + ":- " + 376 RPL_ENDOFMOTD + ":End of MOTD command" + + - When responding to the MOTD message and the MOTD file + is found, the file is displayed line by line, with + each line no longer than 80 characters, using + + + + +Kalt Informational [Page 48] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + RPL_MOTD format replies. These MUST be surrounded + by a RPL_MOTDSTART (before the RPL_MOTDs) and an + RPL_ENDOFMOTD (after). + + 381 RPL_YOUREOPER + ":You are now an IRC operator" + + - RPL_YOUREOPER is sent back to a client which has + just successfully issued an OPER message and gained + operator status. + + 382 RPL_REHASHING + " :Rehashing" + + - If the REHASH option is used and an operator sends + a REHASH message, an RPL_REHASHING is sent back to + the operator. + + 383 RPL_YOURESERVICE + "You are service " + + - Sent by the server to a service upon successful + registration. + + 391 RPL_TIME + " :" + + - When replying to the TIME message, a server MUST send + the reply using the RPL_TIME format above. The string + showing the time need only contain the correct day and + time there. There is no further requirement for the + time string. + + 392 RPL_USERSSTART + ":UserID Terminal Host" + 393 RPL_USERS + ": " + 394 RPL_ENDOFUSERS + ":End of users" + 395 RPL_NOUSERS + ":Nobody logged in" + + - If the USERS message is handled by a server, the + replies RPL_USERSTART, RPL_USERS, RPL_ENDOFUSERS and + RPL_NOUSERS are used. RPL_USERSSTART MUST be sent + first, following by either a sequence of RPL_USERS + or a single RPL_NOUSER. Following this is + RPL_ENDOFUSERS. + + + +Kalt Informational [Page 49] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 200 RPL_TRACELINK + "Link + V + + " + 201 RPL_TRACECONNECTING + "Try. " + 202 RPL_TRACEHANDSHAKE + "H.S. " + 203 RPL_TRACEUNKNOWN + "???? []" + 204 RPL_TRACEOPERATOR + "Oper " + 205 RPL_TRACEUSER + "User " + 206 RPL_TRACESERVER + "Serv S C + @ V" + 207 RPL_TRACESERVICE + "Service " + 208 RPL_TRACENEWTYPE + " 0 " + 209 RPL_TRACECLASS + "Class " + 210 RPL_TRACERECONNECT + Unused. + 261 RPL_TRACELOG + "File " + 262 RPL_TRACEEND + " :End of TRACE" + + - The RPL_TRACE* are all returned by the server in + response to the TRACE message. How many are + returned is dependent on the TRACE message and + whether it was sent by an operator or not. There + is no predefined order for which occurs first. + Replies RPL_TRACEUNKNOWN, RPL_TRACECONNECTING and + RPL_TRACEHANDSHAKE are all used for connections + which have not been fully established and are either + unknown, still attempting to connect or in the + process of completing the 'server handshake'. + RPL_TRACELINK is sent by any server which handles + a TRACE message and has to pass it on to another + server. The list of RPL_TRACELINKs sent in + response to a TRACE command traversing the IRC + network should reflect the actual connectivity of + the servers themselves along that path. + + + + +Kalt Informational [Page 50] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + RPL_TRACENEWTYPE is to be used for any connection + which does not fit in the other categories but is + being displayed anyway. + RPL_TRACEEND is sent to indicate the end of the list. + + 211 RPL_STATSLINKINFO + " + +