From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc3296.txt | 787 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 787 insertions(+) create mode 100644 doc/rfc/rfc3296.txt (limited to 'doc/rfc/rfc3296.txt') diff --git a/doc/rfc/rfc3296.txt b/doc/rfc/rfc3296.txt new file mode 100644 index 0000000..32cf91c --- /dev/null +++ b/doc/rfc/rfc3296.txt @@ -0,0 +1,787 @@ + + + + + + +Network Working Group K. Zeilenga +Request for Comments: 3296 OpenLDAP Foundation +Category: Standards Track July 2002 + + + Named Subordinate References in + Lightweight Directory Access Protocol (LDAP) Directories + +Status of this Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (2002). All Rights Reserved. + +Abstract + + This document details schema and protocol elements for representing + and managing named subordinate references in Lightweight Directory + Access Protocol (LDAP) Directories. + +Conventions + + Schema definitions are provided using LDAPv3 description formats + [RFC2252]. Definitions provided here are formatted (line wrapped) + for readability. + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" used in + this document are to be interpreted as described in BCP 14 [RFC2119]. + +1. Background and Intended Usage + + The broadening of interest in LDAP (Lightweight Directory Access + Protocol) [RFC2251] directories beyond their use as front ends to + X.500 [X.500] directories has created a need to represent knowledge + information in a more general way. Knowledge information is + information about one or more servers maintained in another server, + used to link servers and services together. + + This document details schema and protocol elements for representing + and manipulating named subordinate references in LDAP directories. A + referral object is used to hold subordinate reference information in + + + +Zeilenga Standards Track [Page 1] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + + the directory. These referral objects hold one or more URIs + [RFC2396] contained in values of the ref attribute type and are used + to generate protocol referrals and continuations. + + A control, ManageDsaIT, is defined to allow manipulation of referral + and other special objects as normal objects. As the name of control + implies, it is intended to be analogous to the ManageDsaIT service + option described in X.511(97) [X.511]. + + Other forms of knowledge information are not detailed by this + document. These forms may be described in subsequent documents. + + This document details subordinate referral processing requirements + for servers. This document does not describe protocol syntax and + semantics. This is detailed in RFC 2251 [RFC2251]. + + This document does not detail use of subordinate knowledge references + to support replicated environments nor distributed operations (e.g., + chaining of operations from one server to other servers). + +2. Schema + +2.1. The referral Object Class + + A referral object is a directory entry whose structural object class + is (or is derived from) the referral object class. + + ( 2.16.840.1.113730.3.2.6 + NAME 'referral' + DESC 'named subordinate reference object' + STRUCTURAL + MUST ref ) + + The referral object class is a structural object class used to + represent a subordinate reference in the directory. The referral + object class SHOULD be used in conjunction with the extensibleObject + object class to support the naming attributes used in the entry's + Distinguished Name (DN) [RFC2253]. + + Referral objects are normally instantiated at DSEs immediately + subordinate to object entries within a naming context held by the + DSA. Referral objects are analogous to X.500 subordinate knowledge + (subr) DSEs [X.501]. + + + + + + + + +Zeilenga Standards Track [Page 2] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + + In the presence of a ManageDsaIT control, referral objects are + treated as normal entries as described in section 3. Note that the + ref attribute is operational and will only be returned in a search + entry response when requested. + + In the absence of a ManageDsaIT control, the content of referral + objects are used to construct referrals and search references as + described in Section 4 and, as such, the referral entries are not + themselves visible to clients. + +2.2 The ref Attribute Type + + ( 2.16.840.1.113730.3.1.34 + NAME 'ref' + DESC 'named reference - a labeledURI' + EQUALITY caseExactMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 + USAGE distributedOperation ) + + The ref attribute type has directoryString syntax and is case + sensitive. The ref attribute is multi-valued. Values placed in the + attribute MUST conform to the specification given for the labeledURI + attribute [RFC2079]. The labeledURI specification defines a format + that is a URI, optionally followed by whitespace and a label. This + document does not make use of the label portion of the syntax. + Future documents MAY enable new functionality by imposing additional + structure on the label portion of the syntax as it appears in the ref + attribute. + + If the URI contained in a ref attribute value refers to a LDAP + [RFC2251] server, it MUST be in the form of a LDAP URL [RFC2255]. + The LDAP URL SHOULD NOT contain an explicit scope specifier, filter, + attribute description list, or any extensions. The LDAP URL SHOULD + contain a non-empty DN. The handling of LDAP URLs with absent or + empty DN parts or with explicit scope specifier is not defined by + this specification. + + Other URI schemes MAY be used so long as all operations returning + referrals based upon the value could be performed. This document + does not detail use of non-LDAP URIs. This is left to future + specifications. + + The referential integrity of the URI SHOULD NOT be validated by the + server holding or returning the URI (whether as a value of the + attribute or as part of a referral result or search reference + response). + + + + + +Zeilenga Standards Track [Page 3] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + + When returning a referral result or search continuation, the server + MUST NOT return the separator or label portions of the attribute + values as part of the reference. When the attribute contains + multiple values, the URI part of each value is used to construct the + referral result or search continuation. + + The ref attribute values SHOULD NOT be used as a relative name- + component of an entry's DN [RFC2253]. + + This document uses the ref attribute in conjunction with the referral + object class to represent subordinate references. The ref attribute + may be used for other purposes as defined by other documents. + +3. The ManageDsaIT Control + + The client may provide the ManageDsaIT control with an operation to + indicate that the operation is intended to manage objects within the + DSA (server) Information Tree. The control causes Directory-specific + entries (DSEs), regardless of type, to be treated as normal entries + allowing clients to interrogate and update these entries using LDAP + operations. + + A client MAY specify the following control when issuing an add, + compare, delete, modify, modifyDN, search request or an extended + operation for which the control is defined. + + The control type is 2.16.840.1.113730.3.4.2. The control criticality + may be TRUE or, if FALSE, absent. The control value is absent. + + When the control is present in the request, the server SHALL NOT + generate a referral or continuation reference based upon information + held in referral objects and instead SHALL treat the referral object + as a normal entry. The server, however, is still free to return + referrals for other reasons. When not present, referral objects + SHALL be handled as described above. + + The control MAY cause other objects to be treated as normal entries + as defined by subsequent documents. + +4. Named Subordinate References + + A named subordinate reference is constructed by instantiating a + referral object in the referencing server with ref attribute values + which point to the corresponding subtree maintained in the referenced + server. In general, the name of the referral object is the same as + the referenced object and this referenced object is a context prefix + [X.501]. + + + + +Zeilenga Standards Track [Page 4] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + + That is, if server A holds "DC=example,DC=net" and server B holds + "DC=sub,DC=example,DC=net", server A may contain a referral object + named "DC=sub,DC=example,DC=net" which contains a ref attribute with + value of "ldap://B/DC=sub,DC=example,DC=net". + + dn: DC=sub,DC=example,DC=net + dc: sub + ref: ldap://B/DC=sub,DC=example,DC=net + objectClass: referral + objectClass: extensibleObject + + Typically the DN of the referral object and the DN of the object in + the referenced server are the same. + + If the ref attribute has multiple values, all the DNs contained + within the LDAP URLs SHOULD be equivalent. Administrators SHOULD + avoid configuring naming loops using referrals. + + Named references MUST be treated as normal entries if the request + includes the ManageDsaIT control as described in section 3. + +5. Scenarios + + The following sections contain specifications of how referral objects + should be used in different scenarios followed by examples that + illustrate that usage. The scenarios described here consist of + referral object handling when finding target of a non-search + operation, when finding the base of a search operation, and when + generating search references. Lastly, other operation processing + considerations are presented. + + It is to be noted that, in this document, a search operation is + conceptually divided into two distinct, sequential phases: (1) + finding the base object where the search is to begin, and (2) + performing the search itself. The first phase is similar to, but not + the same as, finding the target of a non-search operation. + + It should also be noted that the ref attribute may have multiple + values and, where these sections refer to a single ref attribute + value, multiple ref attribute values may be substituted and SHOULD be + processed and returned (in any order) as a group in a referral or + search reference in the same way as described for a single ref + attribute value. + + Search references returned for a given request may be returned in any + order. + + + + + +Zeilenga Standards Track [Page 5] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + +5.1. Example Configuration + + For example, suppose the contacted server (hosta) holds the entry + "O=MNN,C=WW" and the entry "CN=Manager,O=MNN,C=WW" and the following + referral objects: + + dn: OU=People,O=MNN,C=WW + ou: People + ref: ldap://hostb/OU=People,O=MNN,C=US + ref: ldap://hostc/OU=People,O=MNN,C=US + objectClass: referral + objectClass: extensibleObject + + dn: OU=Roles,O=MNN,C=WW + ou: Roles + ref: ldap://hostd/OU=Roles,O=MNN,C=WW + objectClass: referral + objectClass: extensibleObject + + The first referral object provides the server with the knowledge that + subtree "OU=People,O=MNN,C=WW" is held by hostb and hostc (e.g., one + is the master and the other a shadow). The second referral object + provides the server with the knowledge that the subtree + "OU=Roles,O=MNN,C=WW" is held by hostd. + + Also, in the context of this document, the "nearest naming context" + means the deepest context which the object is within. That is, if + the object is within multiple naming contexts, the nearest naming + context is the one which is subordinate to all other naming contexts + the object is within. + +5.2. Target Object Considerations + + This section details referral handling for add, compare, delete, + modify, and modify DN operations. If the client requests any of + these operations, there are four cases that the server must handle + with respect to the target object. + + The DN part MUST be modified such that it refers to the appropriate + target in the referenced server (as detailed below). Even where the + DN to be returned is the same as the target DN, the DN part SHOULD + NOT be trimmed. + + In cases where the URI to be returned is a LDAP URL, the server + SHOULD trim any present scope, filter, or attribute list from the URI + before returning it. Critical extensions MUST NOT be trimmed or + modified. + + + + +Zeilenga Standards Track [Page 6] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + + Case 1: The target object is not held by the server and is not within + or subordinate to any naming context nor subordinate to any + referral object held by the server. + + The server SHOULD process the request normally as appropriate for + a non-existent base which is not within any naming context of the + server (generally return noSuchObject or a referral based upon + superior knowledge reference information). This document does not + detail management or processing of superior knowledge reference + information. + + Case 2: The target object is held by the server and is a referral + object. + + The server SHOULD return the URI value contained in the ref + attribute of the referral object appropriately modified as + described above. + + Example: If the client issues a modify request for the target object + of "OU=People,O=MNN,c=WW", the server will return: + + ModifyResponse (referral) { + ldap://hostb/OU=People,O=MNN,C=WW + ldap://hostc/OU=People,O=MNN,C=WW + } + + Case 3: The target object is not held by the server, but the nearest + naming context contains no referral object which the target object + is subordinate to. + + If the nearest naming context contains no referral object which + the target is subordinate to, the server SHOULD process the + request as appropriate for a nonexistent target (generally return + noSuchObject). + + Case 4: The target object is not held by the server, but the nearest + naming context contains a referral object which the target object + is subordinate to. + + If a client requests an operation for which the target object is + not held by the server and the nearest naming context contains a + referral object which the target object is subordinate to, the + server SHOULD return a referral response constructed from the URI + portion of the ref value of the referral object. + + + + + + + +Zeilenga Standards Track [Page 7] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + + Example: If the client issues an add request where the target object + has a DN of "CN=Manager,OU=Roles,O=MNN,C=WW", the server will + return: + + AddResponse (referral) { + ldap://hostd/CN=Manager,OU=Roles,O=MNN,C=WW" + } + + Note that the DN part of the LDAP URL is modified such that it + refers to the appropriate entry in the referenced server. + +5.3. Base Object Considerations + + This section details referral handling for base object processing + within search operations. Like target object considerations for + non-search operations, there are the four cases. + + In cases where the URI to be returned is a LDAP URL, the server MUST + provide an explicit scope specifier from the LDAP URL prior to + returning it. In addition, the DN part MUST be modified such that it + refers to the appropriate target in the referenced server (as + detailed below). + + If aliasing dereferencing was necessary in finding the referral + object, the DN part of the URI MUST be replaced with the base DN as + modified by the alias dereferencing such that the return URL refers + to the new target object per [RFC2251, 4.1.11]. + + Critical extensions MUST NOT be trimmed nor modified. + + Case 1: The base object is not held by the server and is not within + nor subordinate to any naming context held by the server. + + The server SHOULD process the request normally as appropriate for + a non-existent base which not within any naming context of the + server (generally return a superior referral or noSuchObject). + This document does not detail management or processing of superior + knowledge references. + + Case 2: The base object is held by the server and is a referral + object. + + The server SHOULD return the URI value contained in the ref + attribute of the referral object appropriately modified as + described above. + + + + + + +Zeilenga Standards Track [Page 8] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + + Example: If the client issues a subtree search in which the base + object is "OU=Roles,O=MNN,C=WW", the server will return + + SearchResultDone (referral) { + ldap://hostd/OU=Roles,O=MNN,C=WW??sub + } + + If the client were to issue a base or oneLevel search instead of + subtree, the returned LDAP URL would explicitly specify "base" or + "one", respectively, instead of "sub". + + Case 3: The base object is not held by the server, but the nearest + naming context contains no referral object which the base object + is subordinate to. + + If the nearest naming context contains no referral object which + the base is subordinate to, the request SHOULD be processed + normally as appropriate for a nonexistent base (generally return + noSuchObject). + + Case 4: The base object is not held by the server, but the nearest + naming context contains a referral object which the base object is + subordinate to. + + If a client requests an operation for which the target object is + not held by the server and the nearest naming context contains a + referral object which the target object is subordinate to, the + server SHOULD return a referral response which is constructed from + the URI portion of the ref value of the referral object. + + Example: If the client issues a base search request for + "CN=Manager,OU=Roles,O=MNN,C=WW", the server will return + + SearchResultDone (referral) { + ldap://hostd/CN=Manager,OU=Roles,O=MNN,C=WW??base" + } + + If the client were to issue a subtree or oneLevel search instead + of subtree, the returned LDAP URL would explicitly specify "sub" + or "one", respectively, instead of "base". + + Note that the DN part of the LDAP URL is modified such that it + refers to the appropriate entry in the referenced server. + + + + + + + + +Zeilenga Standards Track [Page 9] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + +5.4. Search Continuation Considerations + + For search operations, once the base object has been found and + determined not to be a referral object, the search may progress. Any + entry matching the filter and scope of the search which is not a + referral object is returned to the client normally as described in + [RFC2251]. + + For each referral object within the requested scope, regardless of + the search filter, the server SHOULD return a SearchResultReference + which is constructed from the URI component of values of the ref + attribute. If the URI component is not a LDAP URL, it should be + returned as is. If the LDAP URL's DN part is absent or empty, the DN + part must be modified to contain the DN of the referral object. If + the URI component is a LDAP URL, the URI SHOULD be modified to add an + explicit scope specifier. + + Subtree Example: + + If a client requests a subtree search of "O=MNN,C=WW", then in + addition to any entries within scope which match the filter, hosta + will also return two search references as the two referral objects + are within scope. One possible response might be: + + SearchEntry for O=MNN,C=WW + SearchResultReference { + ldap://hostb/OU=People,O=MNN,C=WW??sub + ldap://hostc/OU=People,O=MNN,C=WW??sub + } + SearchEntry for CN=Manager,O=MNN,C=WW + SearchResultReference { + ldap://hostd/OU=Roles,O=MNN,C=WW??sub + } + SearchResultDone (success) + + One Level Example: + + If a client requests a one level search of "O=MNN,C=WW" then, in + addition to any entries one level below the "O=MNN,C=WW" entry + matching the filter, the server will also return two search + references as the two referral objects are within scope. One + possible sequence is shown: + + + + + + + + + +Zeilenga Standards Track [Page 10] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + + SearchResultReference { + ldap://hostb/OU=People,O=MNN,C=WW??base + ldap://hostc/OU=People,O=MNN,C=WW??base + } + SearchEntry for CN=Manager,O=MNN,C=WW + SearchResultReference { + ldap://hostd/OU=Roles,O=MNN,C=WW??base + } + SearchResultDone (success) + + Note: Unlike the examples in Section 4.5.3.1 of RFC 2251, the LDAP + URLs returned with the SearchResultReference messages contain, as + required by this specification, an explicit scope specifier. + +5.6. Other Considerations + + This section details processing considerations for other operations. + +5.6.1 Bind + + Servers SHOULD NOT return referral result code if the bind name (or + authentication identity or authorization identity) is (or is + subordinate to) a referral object but MAY use the knowledge + information to process the bind request (such as in support a future + distributed operation specification). Where the server makes no use + of the knowledge information, the server processes the request + normally as appropriate for a non-existent authentication or + authorization identity (e.g., return invalidCredentials). + +5.6.2 Modify DN + + If the newSuperior is a referral object or is subordinate to a + referral object, the server SHOULD return affectsMultipleDSAs. If + the newRDN already exists but is a referral object, the server SHOULD + return affectsMultipleDSAs instead of entryAlreadyExists. + +6. Security Considerations + + This document defines mechanisms that can be used to tie LDAP (and + other) servers together. The information used to tie services + together should be protected from unauthorized modification. If the + server topology information is not public information, it should be + protected from unauthorized disclosure as well. + + + + + + + + +Zeilenga Standards Track [Page 11] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + +7. Acknowledgments + + This document borrows heavily from previous work by IETF LDAPext + Working Group. In particular, this document is based upon "Named + Referral in LDAP Directories" (an expired Internet Draft) by + Christopher Lukas, Tim Howes, Michael Roszkowski, Mark C. Smith, and + Mark Wahl. + +8. Normative References + + [RFC2079] Smith, M., "Definition of an X.500 Attribute Type and an + Object Class to Hold Uniform Resource Identifiers (URIs)", + RFC 2079, January 1997. + + [RFC2119] Bradner, S., "Key Words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC2251] Wahl, M., Howes, T. and S. Kille, "Lightweight Directory + Access Protocol (v3)", RFC 2251, December 1997. + + [RFC2252] Wahl, M., Coulbeck, A., Howes, T. and S. Kille, + "Lightweight Directory Access Protocol (v3): Attribute + Syntax Definitions", RFC 2252, December 1997. + + [RFC2253] Wahl, M., Kille, S. and T. Howes, "Lightweight Directory + Access Protocol (v3): UTF-8 String Representation of + Distinguished Names", RFC 2253, December 1997. + + [RFC2255] Howes, T. and M. Smith, "The LDAP URL Format", RFC 2255, + December, 1997. + + [RFC2396] Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform + Resource Identifiers (URI): Generic Syntax", RFC 2396, + August 1998. + + [X.501] ITU-T, "The Directory: Models", X.501, 1993. + +9. Informative References + + [X.500] ITU-T, "The Directory: Overview of Concepts, Models, and + Services", X.500, 1993. + + [X.511] ITU-T, "The Directory: Abstract Service Definition", X.500, + 1997. + + + + + + + +Zeilenga Standards Track [Page 12] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + +10. Author's Address + + Kurt D. Zeilenga + OpenLDAP Foundation + + EMail: Kurt@OpenLDAP.org + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Zeilenga Standards Track [Page 13] + +RFC 3296 Named Subordinate References in LDAP Directories July 2002 + + +11. Full Copyright Statement + + Copyright (C) The Internet Society (2002). All Rights Reserved. + + This document and translations of it may be copied and furnished to + others, and derivative works that comment on or otherwise explain it + or assist in its implementation may be prepared, copied, published + and distributed, in whole or in part, without restriction of any + kind, provided that the above copyright notice and this paragraph are + included on all such copies and derivative works. However, this + document itself may not be modified in any way, such as by removing + the copyright notice or references to the Internet Society or other + Internet organizations, except as needed for the purpose of + developing Internet standards in which case the procedures for + copyrights defined in the Internet Standards process must be + followed, or as required to translate it into languages other than + English. + + The limited permissions granted above are perpetual and will not be + revoked by the Internet Society or its successors or assigns. + + This document and the information contained herein is provided on an + "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + + + + + + + + + + + + + + +Zeilenga Standards Track [Page 14] + -- cgit v1.2.3