From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc3577.txt | 1739 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1739 insertions(+) create mode 100644 doc/rfc/rfc3577.txt (limited to 'doc/rfc/rfc3577.txt') diff --git a/doc/rfc/rfc3577.txt b/doc/rfc/rfc3577.txt new file mode 100644 index 0000000..6e6d6a6 --- /dev/null +++ b/doc/rfc/rfc3577.txt @@ -0,0 +1,1739 @@ + + + + + + +Network Working Group S. Waldbusser +Request for Comments: 3577 R. Cole +Category: Informational AT&T + C. Kalbfleisch + Verio, Inc. + D. Romascanu + Avaya + August 2003 + + + Introduction to the Remote Monitoring (RMON) Family of MIB Modules + +Status of this Memo + + This memo provides information for the Internet community. It does + not specify an Internet standard of any kind. Distribution of this + memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (2003). All Rights Reserved. + +Abstract + + The Remote Monitoring (RMON) Framework consists of a number of + interrelated documents. This memo describes these documents and how + they relate to one another. + +Table of Contents + + 1. The Internet-Standard Management Framework . . . . . . . . . . 2 + 2. Definition of RMON . . . . . . . . . . . . . . . . . . . . . . 2 + 3. Goals of RMON. . . . . . . . . . . . . . . . . . . . . . . . . 3 + 4. RMON Documents . . . . . . . . . . . . . . . . . . . . . . . . 4 + 4.1. RMON-1 . . . . . . . . . . . . . . . . . . . . . . . . . 6 + 4.2. Token Ring Extensions to RMON MIB. . . . . . . . . . . . 7 + 4.3. The RMON-2 MIB . . . . . . . . . . . . . . . . . . . . . 9 + 4.4. RMON MIB Protocol Identifiers. . . . . . . . . . . . . . 10 + 4.5. Remote Network Monitoring MIB Extensions for Switched + Networks (SMON MIB). . . . . . . . . . . . . . . . . . . 10 + 4.6. RMON MIB Extensions for Interface Parameters Monitoring + (IFTOPN) . . . . . . . . . . . . . . . . . . . . . . . . 12 + 4.7. RMON Extensions for Differentiated Services (DSMON MIB). 12 + 4.8. RMON for High Capacity Networks (HCRMON MIB) . . . . . . 13 + 4.9. Application Performance Measurement MIB (APM MIB). . . . 14 + 4.10. RMON MIB Protocol Identifier Reference Extensions. . . . 15 + 4.11. Transport Performance Metrics MIB (TPM MIB). . . . . . . 16 + + + + +Waldbusser, et al. Informational [Page 1] + +RFC 3577 Introduction to RMON August 2003 + + + 4.12. Synthetic Sources for Performance Monitoring MIB + (SSPM MIB) . . . . . . . . . . . . . . . . . . . . . . . 17 + 4.13. RMON MIB Extensions for High Capacity Alarms . . . . . . 17 + 4.14. Real-Time Application Quality of Service Monitoring + (RAQMON) MIB . . . . . . . . . . . . . . . . . . . . . . 17 + 5. RMON Framework Components. . . . . . . . . . . . . . . . . . . 18 + 5.1. MediaIndependent Table . . . . . . . . . . . . . . . . . 18 + 5.2. Protocol Directory . . . . . . . . . . . . . . . . . . . 19 + 5.3. Application Directory and appLocalIndex. . . . . . . . . 21 + 5.4. Data Source. . . . . . . . . . . . . . . . . . . . . . . 22 + 5.5. Capabilities . . . . . . . . . . . . . . . . . . . . . . 22 + 5.6. Control Tables . . . . . . . . . . . . . . . . . . . . . 23 + 6. Relationship of the SSPM MIB with the APM and TPM MIBs . . . . 24 + 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 26 + 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 27 + 8.1. Normative References . . . . . . . . . . . . . . . . . . 27 + 8.2. Informative References . . . . . . . . . . . . . . . . . 27 + 9. Security Considerations. . . . . . . . . . . . . . . . . . . . 29 + 10. Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 30 + 11. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 31 + +1. The Internet-Standard Management Framework + + For a detailed overview of the documents that describe the current + Internet-Standard Management Framework, please refer to section 7 of + RFC 3410 [RFC3410]. + + Managed objects are accessed via a virtual information store, termed + the Management Information Base or MIB. MIB objects are generally + accessed through the Simple Network Management Protocol (SNMP). + Objects in the MIB are defined using the mechanisms defined in the + Structure of Management Information (SMI). This memo specifies a MIB + module that is compliant to the SMIv2, which is described in STD 58, + RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 + [RFC2580]. + +2. Definition of RMON + + Remote network monitoring devices, often called monitors or probes, + are instruments that exist for the purpose of managing and/or + monitoring a network. Often these remote probes are stand-alone + devices and devote significant internal resources for the sole + purpose of managing a network. An organization may employ many of + these devices, up to one per network segment, to manage its internet. + In addition, these devices may be used to manage a geographically + remote network such as for a network management support center of a + service provider to manage a client network, or for the central + support organization of an enterprise to manage a remote site. + + + +Waldbusser, et al. Informational [Page 2] + +RFC 3577 Introduction to RMON August 2003 + + + When the work on the RMON documents was started, this device-oriented + definition of RMON was taken quite literally, as RMON devices were + purpose-built probes and dedicated to implementing the RMON MIB + modules. Soon, cards were introduced that added RMON capability into + a network hub, switch or router. RMON also began to appear as a + software capability that was added to the software of certain network + equipment, as well as software applications that could run on servers + or clients. Despite the variety of these approaches, the RMON + capability in each serves as a dedicated network management resource + available for activities ranging from long-term data collection and + analysis or for ad-hoc firefighting. + + In the beginning, most, but not all, of RMON's capabilities were + based on the promiscuous capture of packets on a network segment or + segments. Over time, that mixture included more and more + capabilities that did not depend on promiscuous packet capture. + Today, some of the newest documents added to the RMON framework allow + multiple techniques of data gathering, where promiscuous packet + capture is just one of several implementation options. + +3. Goals of RMON + + o Offline Operation + + There are sometimes conditions when a management station will + not be in constant contact with its remote monitoring devices. + This is sometimes by design in an attempt to lower + communications costs (especially when communicating over a WAN + or dialup link), or by accident as network failures affect the + communications between the management station and the probe. + + For this reason, RMON allows a probe to be configured to + perform diagnostics and to collect statistics continuously, + even when communication with the management station may not be + possible or efficient. The probe may then attempt to notify + the management station when an exceptional condition occurs. + Thus, even in circumstances where communication between + management station and probe is not continuous, fault, + performance, and configuration information may be continuously + accumulated and communicated to the management station + conveniently and efficiently. + + o Proactive Monitoring + + Given the resources available on the monitor, it is potentially + helpful for it to continuously run diagnostics and to log + network performance. The monitor is always available at the + onset of any failure. It can notify the management station of + + + +Waldbusser, et al. Informational [Page 3] + +RFC 3577 Introduction to RMON August 2003 + + + the failure and can store historical statistical information + about the failure. This historical information can be played + back by the management station in an attempt to perform further + diagnosis into the cause of the problem. + + o Problem Detection and Reporting + + The monitor can be configured to recognize conditions, most + notably error conditions, and to continuously check for them. + When one of these conditions occurs, the event may be logged, + and management stations may be notified in a number of ways. + + o Value Added Data + + Because a remote monitoring device represents a network + resource dedicated exclusively to network management functions, + and because it is located directly on the monitored portion of + the network, the remote network monitoring device has the + opportunity to add significant value to the data it collects. + For instance, by highlighting those hosts on the network that + generate the most traffic or errors, the probe can give the + management station precisely the information it needs to solve + a class of problems. + + o Multiple Managers + + An organization may have multiple management stations for + different units of the organization, for different functions + (e.g., engineering and operations), and in an attempt to + provide disaster recovery. Because environments with multiple + management stations are common, the remote network monitoring + device has to deal with more than one management station, + potentially using its resources concurrently. + +4. RMON Documents + + The RMON Framework includes a number of documents. Each document + that makes up the RMON framework defines some new useful behavior + (i.e., an application) and managed objects that configure, control + and monitor that behavior. This section lists those documents and + describes the role of each. + + One of the key ways to differentiate the various RMON MIB modules is + by noting at which layer they operate. Because the RMON MIB modules + take measurements and present aggregates of those measurements, there + are 2 criteria to quantify for each MIB: + + + + + +Waldbusser, et al. Informational [Page 4] + +RFC 3577 Introduction to RMON August 2003 + + + 1. At which layers does the MIB take measurements? + + For example, the RMON MIB measures data-link layer attributes + (e.g., packets, bytes, errors), while the APM MIB measures + application layer attributes (e.g., response time). Supporting + measurement at higher layers requires analysis deeper into the + packet and many application layer measurements require stateful + flow analysis. + + 2. At which layers does the MIB aggregate measurements? + + This criteria notes the granularity of aggregation. For + example, the RMON MIB aggregates its measurements to the link, + hardware address, or hardware address pair - all data-link + concepts. In contrast, the RMON-2 MIB takes the same data-link + metrics (packets, bytes, errors) and aggregates them based on + network address, transport protocol, or application protocol. + + Note that a MIB may take measurements at one level while aggregating + at different levels. Also note that a MIB may function at multiple + levels. Figure 1 and Figure 2 show the measurement layers and + aggregation layers for each MIB. + + Measurement Layers + + Data Link Network Transport Application + Layer Layer Layer Layer + RMON-1 X + TR-RMON X + RMON-2 X + SMON X + IFTopN X + HCRMON X + APM X + TPM X + + Figure 1 + + + + + + + + + + + + + + +Waldbusser, et al. Informational [Page 5] + +RFC 3577 Introduction to RMON August 2003 + + + Aggregation Layers + + Data Link Network Transport Application + Layer Layer Layer Layer + RMON-1 X + TR-RMON X + RMON-2 X X X + SMON X + IFTopN X + HCRMON X + APM X X X + TPM X X X + + Figure 2 + +4.1. RMON-1 + + The RMON-1 standard [RFC2819] is focused at layer 2 and provides + link-layer statistics aggregated in a variety of ways. In addition, + it provides the generation of alarms when thresholds are crossed, as + well as the ability to filter and capture packet contents. The + components of RMON-1 are: + + The Ethernet Statistics Group + + The ethernet statistics group contains statistics measured by + the probe for each monitored Ethernet interface on this device. + + The History Control Group + + The history control group controls the periodic statistical + sampling of data from various types of network media. + + The Ethernet History Group + + The ethernet history group records periodic statistical samples + from an ethernet network and stores them for later retrieval. + + The Alarm Group + + The alarm group periodically takes statistical samples from + variables in the probe and compares them to previously + configured thresholds. If the monitored variable crosses a + threshold, an event is generated. A hysteresis mechanism is + implemented to limit the generation of alarms. + + + + + + +Waldbusser, et al. Informational [Page 6] + +RFC 3577 Introduction to RMON August 2003 + + + The Host Group + + The host group contains statistics associated with each host + discovered on the network. This group discovers hosts on the + network by keeping a list of source and destination MAC + Addresses seen in good packets promiscuously received from the + network. + + The HostTopN Group + + The hostTopN group is used to prepare reports that describe the + hosts that top a list ordered by one of their statistics. The + available statistics are samples of one of their base + statistics over an interval specified by the management + station. Thus, these statistics are rate based. The + management station also selects how many such hosts are + reported. + + The Matrix Group + + The matrix group stores statistics for conversations between + sets of two MAC addresses. As the device detects a new + conversation, it creates a new entry in its tables. + + The Filter Group + + The filter group allows packets to be matched by a filter + equation. These matched packets form a data stream that may be + captured or may generate events. + + The Packet Capture Group + + The Packet Capture group allows packets to be captured after + they flow through a channel. + + The Event Group + + The event group controls the generation and notification of + events from this device. + +4.2. Token Ring Extensions to RMON MIB + + Some of the functions defined in the RMON-1 MIB were defined specific + to Ethernet media. In order to operate the functions on Token Ring + Media, new objects needed to be defined in the Token Ring Extensions + to RMON MIB [RFC1513]. In addition, this MIB defines additional + objects that provide monitoring functions unique to Token Ring. + + + + +Waldbusser, et al. Informational [Page 7] + +RFC 3577 Introduction to RMON August 2003 + + + The components of the Token Ring Extensions to RMON MIB are: + + The Token Ring Statistics Groups + + The Token Ring statistics groups contain current utilization + and error statistics. The statistics are broken down into two + groups, the Token Ring Mac-Layer Statistics Group and the Token + Ring Promiscuous Statistics Group. The Token Ring Mac-Layer + Statistics Group collects information from the Mac Layer, + including error reports for the ring and ring utilization of + the Mac Layer. The Token Ring Promiscuous Statistics Group + collects utilization statistics from data packets collected + promiscuously. + + The Token Ring History Groups + + The Token Ring History Groups contain historical utilization + and error statistics. The statistics are broken down into two + groups, the Token Ring Mac-Layer History Group and the Token + Ring Promiscuous History Group. The Token Ring Mac-Layer + History Group collects information from the Mac Layer, + including error reports for the ring and ring utilization of + the Mac Layer. The Token Ring Promiscuous History Group + collects utilization statistics from data packets collected + promiscuously. + + The Token Ring Ring Station Group + + The Token Ring Ring Station Group contains statistics and + status information associated with each Token Ring station on + the local ring. In addition, this group provides status + information for each ring being monitored. + + The Token Ring Ring Station Order Group + + The Token Ring Ring Station Order Group provides the order of + the stations on monitored rings. + + The Token Ring Ring Station Config Group + + The Token Ring Ring Station Config Group manages token ring + stations through active means. Any station on a monitored ring + may be removed or have configuration information downloaded + from it. + + + + + + + +Waldbusser, et al. Informational [Page 8] + +RFC 3577 Introduction to RMON August 2003 + + + The Token Ring Source Routing Group + + The Token Ring Source Routing Group contains utilization + statistics derived from source routing information optionally + present in token ring packets. + +4.3. The RMON-2 MIB + + The RMON-2 MIB [RFC2021] extends the architecture defined in RMON-1, + primarily by extending RMON analysis up to the application layer. + + The components of the RMON-2 MIB are: + + The Protocol Directory Group + + Every RMON-2 implementation will have the capability to parse + certain types of packets and identify their protocol type at + multiple levels. The protocol directory presents an inventory + of those protocol types the probe is capable of monitoring, and + allows the addition, deletion, and configuration of protocol + types in this list. + + Protocol Distribution Group + + This function controls the collection of packet and octet + counts for any or all protocols detected on a given interface. + An NMS can use this table to quickly determine bandwidth + allocation utilized by different protocols. + + Address Mapping Group + + This function lists MAC address to network address bindings + discovered by the probe and on which interface they were last + seen. + + Network Layer Host Group + + This function counts the amount of traffic sent from and to + each network address discovered by the probe. + + Network Layer Matrix Group + + This function counts the amount of traffic sent between each + pair of network addresses discovered by the probe. + + + + + + + +Waldbusser, et al. Informational [Page 9] + +RFC 3577 Introduction to RMON August 2003 + + + Application Layer Host Group + + This function counts the amount of traffic, by protocol, sent + from and to each network address discovered by the probe. + + Application Layer Matrix + + This function counts the amount of traffic, by protocol, sent + between each pair of network addresses discovered by the probe. + + User History + + This function allows an NMS to request that certain variables + on the probe be periodically polled and for a time-series to be + stored of the polled values. This builds a user-configurable + set of variables to be monitored (not to be confused with data + about users). + + Probe Configuration + + This group contains configuration objects that configure many + aspects of the probe, including the software downloaded to the + probe, the out of band serial connection, and the network + connection. + +4.4. RMON MIB Protocol Identifiers + + The RMON-2 MIB identifies protocols at any layer of the 7 layer + hierarchy with an identifier called a Protocol Identifier, or + ProtocolID for short. ProtocolIDs also identify the particular + configuration of layering in use, including any arbitrary + encapsulations. The RMON MIB Protocol Identifiers document [RFC2896] + is a companion document to the RMON-2 MIB that defines a number of + well-known protocols. Another document, the RMON MIB Protocol + Identifiers Macros [RFC2895], defines a macro format for the + description of these well-known protocols and others that may be + described in the future. + + As the RMON Framework has grown, other documents have been added to + the framework that utilize ProtocolIDs. + +4.5. Remote Network Monitoring MIB Extensions for Switched Networks + (SMON MIB) + + Switches have become pervasive in today's networks as a form of + broadcast media. SMON [RFC2613] provides RMON-like functions for the + monitoring of switched networks. + + + + +Waldbusser, et al. Informational [Page 10] + +RFC 3577 Introduction to RMON August 2003 + + + Switches today differ from standard shared media protocols because: + + 1) Data is not, in general, broadcast. This MAY be caused by the + switch architecture or by the connection-oriented nature of the + data. This means, therefore, that monitoring non-broadcast + traffic needs to be considered. + + 2) Monitoring the multiple entry and exit points from a Switching + device requires a vast amount of resources - memory and CPU, + and aggregation of the data in logical packets of information, + determined by the application needs. + + 3) Switching incorporates logical segmentation such as Virtual + LANs (VLANs). + + 4) Switching incorporates packet prioritization. + + 5) Data across the switch fabric can be in the form of cells. + Like RMON, SMON is only concerned with the monitoring of + packets. + + Differences such as these make monitoring difficult. The SMON MIB + provides the following functions that help to manage switched + networks: + + smonVlanStats + + This function provides traffic statistics per Virtual LAN for + 802.1q VLANs. + + smonPrioStats + + This function provides traffic statistics per priority level + for 802.1q VLANS. + + dataSourceCaps + + This function identifies all supported data sources on a SMON + device. An NMS MAY use this table to discover the RMON and + Copy Port attributes of each data source. + + portCopyConfig + + Many network switches provide the capability to make a copy of + traffic seen on one port and sending it out to another port for + management purposes. This occurs in addition to any copying + performed during the normal forwarding behavior of the switch. + + + + +Waldbusser, et al. Informational [Page 11] + +RFC 3577 Introduction to RMON August 2003 + + + The portCopyConfig function provides control of the port copy + functionality in a device. + +4.6. RMON MIB Extensions for Interface Parameters Monitoring (IFTOPN) + + Many network switches contain hundreds of ports, many with only one + attached device. A common operation when managing such a switch is + to sort the interfaces by one of the parameters (e.g., to find the + most highly utilized interface). If the switch contains many + interfaces it can be expensive and time consuming to download + information for all interfaces to sort it on the NMS. Instead, the + ifTopN MIB [RFC3144] allows the sorting to occur on the switch and + for only the top interfaces to be downloaded. + +4.7. RMON Extensions for Differentiated Services (DSMON MIB) + + This MIB [RFC3287] defines extensions of RMON for monitoring the + traffic usage of Differentiated Services [RFC2474] codepoint values. + The 6-bit DiffServ codepoint portion (DSCP) of the Type of Service + (TOS) octet in the IP header provides for 64 different packet + treatments for the implementation of differentiated network devices. + DSMON-capable RMON probes collect and aggregate statistics based on + the inspection of the DSCP value in monitored packets. + + The DSMON MIB defines a DSCP counter aggregation mechanism to reduce + the total number of counters by configuring the agent to internally + aggregate counters based on the DSCP value. This mechanism is + designed to overcome the agent data collection limitation, perform + data reduction at the agent and applications level, and optimize the + application for cases in which some codepoint values are not used, or + lead to similar packet treatment in the monitored network domain. + + The components of the DSMON MIB are: + + The Aggregate Control Group + + The Aggregate Control Group enables the configuration of the + counter aggregation groups. + + The DSMON Statistics Group + + The DSMON Statistics Group contains per counter aggregation + group distribution statistics for a particular RMON data + source. + + + + + + + +Waldbusser, et al. Informational [Page 12] + +RFC 3577 Introduction to RMON August 2003 + + + The DSMON Protocol Distribution Group + + The DSMON Protocol Distribution Group reports per counter + aggregation distribution statistics for each application + protocol detected on a particular RMON data source. + + The DSMON Host Group + + The DSMON Host Group contains host address distribution + statistics for each counter aggregation group, detected on a + particular RMON data source. + + The DSMON Capabilities Group + + The DSMON Capabilities Group reports the DSMON MIB functional + capabilities of the agent implementation. + + The DSMON Matrix Group + + The DSMON Matrix Group contains host address pair distribution + statistics for each counter aggregation group, detected on a + particular RMON data source. + +4.8. RMON for High Capacity Networks (HCRMON MIB) + + This MIB [RFC3272] defines extensions to RMON for use on high + capacity networks. Except for the mediaIndependentTable, each of the + tables in this MIB adds high capacity capability to an associated + table in the RMON-1 MIB or RMON-2 MIB. + + The mediaIndependentTable provides media independent utilization and + error statistics for full-duplex and half-duplex media. Prior to the + existence of the HCRMON MIB, a new table needed to be created for + RMON monitoring of each data-link layer media. These tables included + many statistical attributes of the media, including packet and octet + counters that are independent of the media type. This was not + optimal because there was no way to monitor media types for which a + media-specific table had not been defined. Further, there were no + common objects to monitor media-independent attributes between media + types. + + In the future, for media other than ethernet and token ring, the + mediaIndependentTable will be the source for media-independent + statistics. Additional media-specific tables may be created to + provide attributes unique to particular media, such as error + counters. + + + + + +Waldbusser, et al. Informational [Page 13] + +RFC 3577 Introduction to RMON August 2003 + + +4.9. Application Performance Measurement MIB (APM MIB) + + The APM MIB [APM] provides analysis of application performance as + experienced by end-users. + + Application performance measurement measures the quality of service + delivered to end-users by applications. With this perspective, a + true end-to-end view of the IT infrastructure results, combining the + performance of the application, desktop, network, and server, as well + as any positive or negative interactions between these components. + + Despite all the technically sophisticated ways in which networking + and system resources can be measured, human end-users perceive only + two things about an application: availability and responsiveness. + + Availability - The percentage of the time that the application is + ready to give a user service. + + Responsiveness - The speed at which the application delivers the + requested service. + + The APM MIB includes the following functions: + + The APM Application Directory Group + + The APM Application Directory group contains configuration + objects for every application or application verb monitored on + this system. + + The APM User Defined Applications Group + + The APM User Defined Applications Group contains objects that + allow for the tracking of applications or application verbs + that are not registered in the protocolDirectoryTable. + + The APM Report Group + + The APM Report Group is used to prepare regular reports that + aggregate application performance by flow, by client, by + server, or by application. + + The APM Transaction Group + + The APM Transaction Group is used to show transactions that are + currently in progress and ones that have ended recently, along + with their responsiveness metric. + + + + + +Waldbusser, et al. Informational [Page 14] + +RFC 3577 Introduction to RMON August 2003 + + + One important benefit of this table is that it allows a + management station to check on the status of long-lived + transactions. Because the apmReport and apmException + mechanisms act only on transactions that have finished, a + network manager may not have visibility for some time into the + performance of long-lived transactions, such as streaming + applications, large data transfers, or (very) poorly performing + transactions. In fact, by their very definition, the apmReport + and apmException mechanisms only provide visibility into a + problem after nothing can be done about it. + + The APM Exception Group + + The APM Exception Group is used to generate immediate + notifications of transactions that cross certain thresholds. + The apmExceptionTable is used to configure which thresholds are + to be checked for which types of transactions. The + apmTransactionResponsivenessAlarm notification is sent when a + transaction occurs with a responsiveness that crosses a + threshold. + + The apmTransactionUnsuccessfulAlarm notification is sent when a + transaction, for which exception checking was configured, + fails. + + The APM Notification Group + + The APM Notification Group contains 2 notifications that are + sent when thresholds in the APM Exception Table are exceeded. + +4.10. RMON MIB Protocol Identifier Reference Extensions + + The protocol identifier defined in RMON-2 [RFC2021] can identify any + protocol at any layer and its encapsulation. The protocol identifier + macro document [RFC2896] defines a convenient human readable and + machine parseable format for documenting well-known protocols. + + For the most part, the protocol identifiers used by RMON-2 + implementations have described protocols at any layer, including the + application layer, but have not gone any deeper into the application. + In order to differentiate an application's behavior while performing + different tasks (logging in vs. downloading, for example), it is + important to have a separate protocol identifier for each application + "verb". The macro defined in [RFC2896] is inconvenient for defining + application verbs because it assumes that most protocols are + identified by an integer type field and many or most applications use + other means for identifying verbs, including character strings. + + + + +Waldbusser, et al. Informational [Page 15] + +RFC 3577 Introduction to RMON August 2003 + + + These extensions define another macro for defining application verbs + that are children of an application. The parent application can be + defined with the original protocol identifier macro and the + application verbs are defined with the new macro. + +4.11. Transport Performance Metrics MIB (TPM MIB) + + The TPM MIB [TPM] monitors selected performance metrics and + statistics derived from the monitoring of network packets and sub- + application level transactions. The MIB is defined to compliment the + APM reports by providing a 'drill-down' capability to better + understand selected applications' performance. The metrics are + defined through reference to existing IETF, ITU and other standards + organizations' documents. The monitoring covers both passive and + active traffic generation sources. + + The TPM MIB includes the following functions: + + The tpmCapabilities Group + + The tpmCapabilitiesGroup contains objects and tables that show + the measurement protocol and metric capabilities of the agent. + + The tpmAggregateReports Group + + The tpmAggregateReportsGroup is used to provide the collection + of aggregated statistical measurements for the configured + report intervals. + + The tpmCurrentReports Group + + The tpmCurrentReportsGroup is used to provide the collection of + uncompleted measurements for the current configured report for + those transactions caught in progress. A history of these + transactions is also maintained once the current transaction + has completed. + + The tpmExceptionReports Group + + The tpmExceptionReportsGroup is used to link immediate + notifications of transactions that exceed certain thresholds + defined in the apmExceptionGroup [APM]. This group reports the + aggregated sub-application measurements for those applications + exceeding thresholds. + + + + + + + +Waldbusser, et al. Informational [Page 16] + +RFC 3577 Introduction to RMON August 2003 + + +4.12. Synthetic Sources for Performance Monitoring MIB (SSPM MIB) + + The Synthetic Sources for Performance Monitoring MIB [SSPM] covers + the artificial generation of a) application-level, b) transport- + level, and c) link-level traffic for the purpose of monitoring system + performance. There are situations where it is useful to be able to + control the generation of synthetic traffic when evaluating system + performance. There are other situations where system performance + evaluation can rely upon naturally generated application-level + traffic, in which case one needs only monitor existing traffic and + not instrument synthetic traffic. The SSPM MIB provides the ability + to configure and control the generation of this synthetic traffic. + +4.13. RMON MIB Extensions for High Capacity Alarms + + There is a need for a standardized way of providing the same type of + alarm thresholding capabilities for Counter64 objects, as already + exists for Counter32 objects. The RMON-1 alarmTable objects and + RMON-1 notification types are specific to 32-bit objects, and cannot + be used to properly monitor Counter64-based objects. Extensions to + these existing constructs are needed which explicitly support + Counter64-based objects. These extensions are completely independent + of the existing RMON-1 alarm mechanisms. + + This MIB [RFC3434] contains the following functions: + + The hcAlarmControlObjects group + + Controls the configuration of alarms for high capacity MIB + object instances. + + The hcAlarmCapabilities group + + Describes the high capacity alarm capabilities provided by the + agent. + + The hcAlarmNotifications group + + Provides new rising and falling threshold notifications for + high capacity objects. + +4.14. Real-Time Application Quality of Service Monitoring + (RAQMON) MIB + + There is a need to extend the RMON framework to monitor end devices + such as IP phones, pagers, Instant Message Clients, mobile phones, + and PDA devices. This memo proposes an extension of RMON Framework + to allow Real-time Application QoS information of these types of end + + + +Waldbusser, et al. Informational [Page 17] + +RFC 3577 Introduction to RMON August 2003 + + + devices to be retrieved with SNMP, independent of the technology used + to perform the measurements. An end-to-end user experience of the + quality of service (QoS) and performance for such an application is a + combination of device performance, transport network performance and + specific application context. + + RAQMON [RAQMON-FRAMEWORK] defines a common framework to identify a + set of application QoS parameters and a reporting mechanism using a + common protocol data unit (PDU) format used between a RAQMON Data + Source (RDS) and a RAQMON Report Collector (RRC) to report QOS + statistics using RTCP and SNMP as underlying transport protocol. + + See the RAQMON MIB [RAQMON-MIB] for more information about its + components. + +5. RMON Framework Components + + The collection of documents in the RMON Framework are associated by + 1) A common purpose and similar collection methodologies; and, 2) Use + of common infrastructure components. + + These common infrastructure components are: + + - MediaIndependent Table + - Protocol Directory + - appDirectory + - DataSource + - Capabilities + - Control Tables + +5.1. MediaIndependent Table + + While many data-link media types exist and they each have unique + features, there are many statistics that are common across most + media. For example, counts of packets and octets are interesting for + most media. The media independent table contains the most common + such statistics and forms a super class from which specific interface + types are inherited. This means that the common statistics can be + monitored even for media types that are unknown. + + For example, if the mediaindependentTable had existed prior to the + definition of the etherStatsTable, the etherStatsTable could have + omitted the etherStatsDropEvents, etherStatsOctets, etherStatsPkts + objects. + + The Media Independent Table is defined in the High Capacity RMON MIB + [RFC3434]. + + + + +Waldbusser, et al. Informational [Page 18] + +RFC 3577 Introduction to RMON August 2003 + + +5.2. Protocol Directory + + The second of the RMON infrastructure components is the Protocol + Directory Group defined in the RMON-2 MIB [RFC2021]. The main + objective of RMON-2 was to extend the remote network monitoring + agents capabilities beyond the link layer to higher level protocol + monitoring. This required a means to globally identify individual + protocol encapsulations. This capability is provided by the Protocol + Directory Group, specifically the protocolDirID found in the + protocolDirTable in the RMON-2 MIB. + + The Protocol Directory allows the agent to provide an inventory of + the protocols that the agent can decode, count, categorize and time. + The directory and its objects are designed to allow for the addition, + deletion and configuration of the protocol encapsulations in the + directory list. Protocol Directory entries are identified primarily + by an object called the protocolDirID. The protocolDirID is a + hierarchically formatted OCTET STRING that globally identifies + individual protocol encapsulations. A protocol descriptor macro has + been defined in RFC 2895 [RFC2895] to describe the various protocol + layers supported in the protocolDirID protocol hierarchy. The + protocolDirID is defined as a tree built up from successive protocol + encapsulations. Each layer is identified by a 4-octet identifier + that identifies the child protocol within the context of the parent + protocol identified by the preceding identifiers. + + Associated with each protocol layer in the protocolDirID is a 1-octet + parameter field. Each parameter identifies potential options + specific to that protocol, such as the agent's capability to count + fragmented packets correctly and to track sessions for port mapped + protocols, e.g., TFTP. These 1-octet parameter fields are + concatenated, in order, in the protocolDirParameters object. + + The protocolDirTable index is comprised of the protocolDirID, the + protocolDirParameters and their associated length fields. The index + format is shown in Figure 3. + + +---+--------------------------+---+---------------+ + | c ! | c ! protocolDir | + | n ! protocolDirID | n ! Parameters | + | t ! | t ! | + +---+--------------------------+---+---------------+ + + Figure 3: the protocolDirTable INDEX format. + + + + + + + +Waldbusser, et al. Informational [Page 19] + +RFC 3577 Introduction to RMON August 2003 + + + An example protocolDirTable INDEX for SNMP over UDP over IP over + Ethernet is: + + 16.0.0.0.1.0.0.8.0.0.0.0.17.0.0.0.161.4.0.0.0.0 + + | | | | | | | | + +--+-------+-------+--------+---------+-+-------+ + c ether2 ip udp snmp c param. + + c = 1-subidentifier count field + + Figure 4: A protocolDirTable INDEX example for + SNMP over UDP over IP over Ethernet. + + The set of defined protocol layers currently described is found in + RFC 2896 [RFC2896]. RFC 2895 [RFC2895] defines a process for + submitting new protocols to add to the currently defined set. + Periodic updates to RFC 2896 will be published to incorporate new + protocol definitions that have been submitted. In fact, RFC 2896 is + the second version of the defined protocol macros, obsoleting RFC + 2074 [RFC2074]. RFC 2895 also defines how to handle protocols that + do not map into this well-defined tree hierarchy built up from + encapsulation protocol identifiers. An example of such a protocol + encapsulation is RTP, which is mapped to specific UDP ports through a + separate signaling mechanism. These are handled by the ianaAssigned + protocols, as described in RFC 2895. + + The protocolDirTable is defined (and used) in the RMON-2 MIB + [RFC2021], and is being used in other RMON WG MIBs, as well as other + IETF defined MIBs. Examples include the APM MIB [APM], the TPM MIB + [TPM] and the SSPM MIB [SSPM]. + + As mentioned in previous sections, the protocolDirID is being + extended in two ways. First, work is underway on a new set of + protocol descriptor macros to extend the protocol encapsulation model + to identify application layer verbs [RFC3395]. This extension was + motivated by the work on the APM MIB and the TPM MIB. Second, the + APM MIB defines the apmAppDirectoryTable that provides a directory of + applications that the agent can process. This is discussed further + in the following section. Combined, these extensions allow: + + + The APM MIB to define and monitor the end-user's view of + application performance. + + + The TPM MIB to clearly specify the sub-transactions that + comprise the application it monitors through the + tpmTransMetricDirTable. + + + + +Waldbusser, et al. Informational [Page 20] + +RFC 3577 Introduction to RMON August 2003 + + + + The SSPM MIB to generate synthetic application transactions by + importing the appLocalIndex from the APM MIB. + +5.3. Application Directory and appLocalIndex + + APM, TPM and related applications collect certain types of statistics + for each application or application verb they are decoding. Some + applications and application verbs are defined in the protocol + directory and thus get their own protocolID and a corresponding + protocolDirLocalIndex. Other application verbs are defined more + dynamically by entries in the apmHttpFilterTable or + apmUserDefinedAppTable. These dynamically defined applications do + not have protocolDirID's assigned to them. + + The APM MIB [APM] defines an important index called the + appLocalIndex. For all application monitoring in the APM and TPM + MIBs, applications are identified by integer values of the + appLocalIndex. However, there is no single registry of applications + (as there is for protocols) because there are a few different + mechanisms through which an application may be registered. For each + value of appLocalIndex, a corresponding entry will exist in one of + several tables: + + 1. The protocolDirTable - Some values of appLocalIndex correspond + to protocolDirLocalIndex values assigned in the + protocolDirTable. Each of these corresponds to a protocol + defined by a protocolID. + + 2. The apmHttpFilterTable - Some values of appLocalIndex + correspond to apmHttpFilterAppLocalindex values assigned in the + apmHttpFilterTable. Each of these corresponds to an + application verb defined as a set of HTTP transactions that + match a set of filters. + + 3. The apmUserDefinedAppTable - Some values of appLocalIndex + correspond to index values of the apmUserDefinedAppTable. Each + of them corresponds to an application or application verb + defined in a user-defined way. + + Each value of appLocalIndex will only be registered in one of these + tables. In effect, the appLocalIndex number space is the union of + these number spaces, where these tables must work together to avoid + assigning overlapping (duplicate) appLocalIndexes. + + Each unique appLocalIndex value is also registered in the + apmAppDirectoryTable, where a number of attributes of the application + may be configured. + + + + +Waldbusser, et al. Informational [Page 21] + +RFC 3577 Introduction to RMON August 2003 + + +5.4. Data Source + + Most RMON functions use a DataSource as a pointer to the entity from + which data is to be collected. The DataSource is an object + identifier that identifies one of three types of data sources: + + ifIndex. + + Traditional RMON dataSources. Called 'port-based' for + ifType. not equal to 'propVirtual(53)'. is the ifIndex + value. + + smonVlanDataSource. + + A dataSource of this form refers to a 'Packet-based VLAN' and + is called a 'VLAN-based' dataSource. is the VLAN ID as + defined by the IEEE 802.1Q standard. The value is between 1 + and 4094 inclusive, and it represents an 802.1Q VLAN-ID with a + global scope within a given bridged domain, as defined by + 802.1Q. + + entPhysicalEntry. + + A dataSource of this form refers to a physical entity within + the agent and is called an 'entity-based' dataSource. is + the value of the entPhysicalIndex in the entPhysicalTable. + +5.5. Capabilities + + Probe Capabilities objects have been introduced in the RMON MIB + modules with the goal of helping applications determine the + capabilities of the different probes in the domain. These objects + use a BITS syntax (with the exception of some of the objects in the + TPM and SSPM MIBs), and list in an explicit manner the MIB groups + supported by the probe, as well as functional capabilities of the + specific RMON agents. By reading the values of these objects, it is + possible for applications to know which RMON functions are usable + without going through a trial-and-error process that can result in + loss of time and bandwidth in the operational flow. These objects + have the MAX-ACCESS of read-only, which defines their use as an + indication of what is supported by a probe, and not a means to + configure the probe for operational modes. An RMON agent SHOULD + initiate the capabilities objects at agent initialization and SHOULD + NOT modify the objects during operation. + + The probeCapabilities object in the RMON-2 MIB describes the + capabilities of probes that support RMON, Token-Ring RMON and RMON-2. + + + + +Waldbusser, et al. Informational [Page 22] + +RFC 3577 Introduction to RMON August 2003 + + + The smonCapabilities object in the SMON MIB describes the SMON- + specific capabilities of probes that support the SMON MIB. + + The dataSourceCapsTable in the SMON MIB defines the capabilities of + the SMON data sources on probes that support the RMON MIB. + + The interfaceTopNCaps object in the Interface TopN MIB defines the + sorting capabilities supported by an agent that supports the + Interface TopN MIB. + + The dsmonCapabilities object in the DSMON MIB provides an indication + of the DSMON groups supported by an agent that supports the DSMON + MIB. + + The tpmCapabilitiesGroup contains objects and tables, which show the + measurement protocol and metric capabilities of an agent that + supports the TPM MIB. + + The sspmCapabilitiesTable indicates whether a device supporting the + SSPM MIB supports SSPM configuration of the corresponding + AppLocalIndex. + + The hcAlarmCapabilities object provides an indication of the high + capacity alarm capabilities supported by an agent that supports the + HC-Alarm MIB. + +5.6. Control Tables + + Due to the complex nature of the available functions in the RMON MIB + modules, these functions often need user configuration. In many + cases, the function requires parameters to be set up for a data + collection operation. The operation can proceed only after these + parameters are fully set up. + + Many functional groups in the RMON MIBs have one or more tables in + which to set up control parameters, and one or more data tables in + which to place the results of the operation. The control tables are + typically read-write in nature, while the data tables are typically + read-only. Because the parameters in the control table often + describe resulting data in the data table, many of the parameters can + be modified only when the control entry is invalid. Thus, the method + for modifying these parameters is to invalidate the control entry, + causing its deletion and the deletion of any associated data entries, + and then create a new control entry with the proper parameters. + Deleting the control entry also gives a convenient method for + reclaiming the resources used by the associated data. + + + + + +Waldbusser, et al. Informational [Page 23] + +RFC 3577 Introduction to RMON August 2003 + + + To facilitate control by multiple managers, resources have to be + shared among the managers. These resources are typically the memory + and computation resources that a function requires. + + Two facilities are used to ease cooperation between multiple managers + as they create and use control tables. The first is the use of + EntryStatus or RowStatus objects that guarantee that two managers can + avoid creating the same control entry. The second is the use of + OwnerString objects in control tables that provides the following + benefits: + + 1. Provides information to facilitate sharing of already existing + control entries instead of creating a new but identical entry. + + 2. Provides information to allow the ultimate human owners of + control entries to identify each other so they can cooperate in + cases of conflict over resources. + + 3. Provides information to allow software to identify control + entries that it owns but has forgotten about (e.g., due to a + crash or other error) so that it can re-use or free them. + + 4. Provides information to allow an administrator to make an + informed decision to override someone else's control entry when + circumstances make it necessary. + + 5. Provides information to identify control entries that are set + up automatically when the device starts up. + + See the RMON MIB [RFC2819] for further information on the use of + control tables, EntryStatus/RowStatus, and OwnerStrings. + +6. Relationship of the SSPM MIB with the APM and TPM MIBs + + While APM and TPM may monitor actual traffic generated by end-users + on the network, they may also monitor synthetically generated + traffic. The SSPM MIB provides a mechanism for the generation of + synthetic traffic but no mechanism for monitoring - the task of + monitoring the generated traffic is deferred to the APM and TPM MIBs. + + Figure 5 shows an overview of the components of the SSPM MIB + architecture, including the roles played by the APM and TPM MIBs. + The RMON documents address the "Control-Level" in this diagram and + some aspects of the "Synchronization Control-Level". The underlying + "Instrumentation-Level" is implementation dependent and outside the + domain of the RMON specifications. + + + + + +Waldbusser, et al. Informational [Page 24] + +RFC 3577 Introduction to RMON August 2003 + + + +----------------+ + +-------------| Application |-------------+ + | +----------------+ | + | | | + +--------------------------------+ | + | Synchronization Control | | + +--------------------------------+ | + | | | + V V V + +------------------+ +------------------+ +--------------+ + |Traffic Generation| |Monitoring Metrics| |Data Reduction| + | Control | | Control | | Control | + +------------------+ +------------------+ +--------------+ + | ^ | ^ | ^ + | | | | | | + V | V | V | + +------------------+ +------------------+ +---------------+ + |Traffic Generation| |Monitoring Metrics| |Data Reduction | + | Instrumentation| | Instrumentation| +-->|Instrumentation| + +------------------+ +------------------+ | +---------------+ + | | + | | + Various levels | | + and span +-----------| + | + | + V + Reports + + Figure 5: An SSPM Performance Monitoring System + + It is the responsibility of the network management application to + coordinate the individual aspects of the performance management + system. + + Within the APM, TPM, and SSPM set of RMON MIB modules: + + + APM MIB [APM] is responsible for the aspects of the "Monitoring + Metrics Control" directly related to the end-user's perceived + application-level performance. The APM MIB also handles + aspects of "Data Reduction Control" and "Reports". Finally, + when TPM MIB relies upon the control tables in the APM MIB for + its own control, then APM MIB is providing some aspects of + "Synchronization Control" of the reports from these two MIBs. + + + + + + + +Waldbusser, et al. Informational [Page 25] + +RFC 3577 Introduction to RMON August 2003 + + + + TPM MIB [TPM] is responsible for the aspects of the "Monitoring + Metrics Control". TPM MIB also handles aspects of "Data + Reduction Control" and "Reports" related to sub-application- + level transactions. Synchronization control with APM MIB is + provided by opting to rely on the APM MIB control tables within + the TPM MIB. + + + SSPM MIB [SSPM] is responsible for the "Traffic Generation + Control" in the event that synthetic traffic is to be + monitored. The other, most common, option is to monitor + natural, user-generated traffic. + + The "Monitor Metrics Control" is essentially hard-coded in the APM + MIB. Within the TPM MIB, a metrics table is used to identify the + metrics monitored within a specific implementation of the TPM MIB. + The "Data Reduction Control" is essentially hard-coded within the MIB + structure of the APM MIB and the TPM MIB. These MIBs strictly + specify the statistics to be reported within a set of report tables. + + Both the TPM MIB and the SSPM MIB rely upon the APM MIB's + appLocalIndex to specify the application being monitored or + generated. The APM MIB provides the end-user view of the application + performance, e.g., the Whois transaction time. The TPM MIB, through + its tpmTransMetricDirTable, identifies a set of sub-application level + transactions and their metrics, which are associated with the + application. E.g., an implementation of the TPM MIB could report the + DNS lookup time, the TCP connect time (to the Whois Server), the + Whois Req/Resp download time. The SSPM MIB could be configured to + generate synthetically, these Whois transactions. + + The testing model then is to first configure the traffic generation + instrumentation through the SSPM MIB control function. This defines + aspects of the synthetic traffic such as application type, targets, + etc. Once the traffic generation is configured, the network + management application can setup the monitoring instrumentation + through the APM MIB and TPM MIB. These control the reporting + periods, the type of data aggregation, etc. Once the tests are + complete, the network management application retrieves the reports + from the monitoring metrics control MIBs, e.g., APM MIB and TPM MIB. + +7. Acknowledgements + + This memo is a product of the RMON MIB working group. In addition, + the authors gratefully acknowledge the contributions by Lester + D'Souza of NetScout Systems, Inc. + + + + + + +Waldbusser, et al. Informational [Page 26] + +RFC 3577 Introduction to RMON August 2003 + + +8. References + +8.1. Normative References + + [RFC2819] Waldbusser, S., "Remote Network Monitoring + Management Information Base", STD 59, RFC 2819, + May 2000. + +8.2. Informative References + + [RFC2026] Bradner, S., "The Internet Standards Process -- + Revision 3", BCP 9, RFC 2026, October 1996. + + [RFC2578] McCloghrie, K., Perkins, D. and J. Schoenwaelder, + Eds., "Structure of Management Information Version + 2 (SMIv2)", STD 58, RFC 2578, April 1999. + + [RFC2579] McCloghrie, K., Perkins, D. and J. Schoenwaelder, + J., Eds., "Textual Conventions for SMIv2", STD 58, + RFC 2579, April 1999. + + [RFC2580] McCloghrie, K., Perkins, D. and J. Schoenwaelder, + J., Eds., "Conformance Statements for SMIv2", STD + 58, RFC 2580, April 1999. + + [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, + "Introduction and Applicability Statements for + Internet-Standard Management Framework", RFC 3410, + December 2002. + + [RFC1513] Waldbusser, S., "Token Ring Extensions to the + Remote Network Monitoring MIB", RFC 1513, + September 1993. + + [RFC2021] Waldbusser, S., "Remote Network Monitoring + Management Information Base Version 2 using + SMIv2", RFC 2021, January 1997. + + [RFC2895] Bierman, A., Bucci, C. and R. Iddon, "Remote + Network Monitoring Management Information Base + Protocol Identification Reference", RFC 2895, + August 2000. + + [RFC2896] Bierman, A., Bucci, C. and R. Iddon, "Remote + Network Monitoring MIB Protocol Identifier + Macros", RFC 2896, August 2000. + + + + + +Waldbusser, et al. Informational [Page 27] + +RFC 3577 Introduction to RMON August 2003 + + + [RFC2613] Waterman, R., Lahaye, B., Romascanu, D. and S. + Waldbusser, "Remote Network Monitoring MIB + Extensions for Switched Networks Version 1.0", RFC + 2613, June 1999. + + [RFC3144] Waldbusser, S., "Remote Monitoring MIB Extensions + for Interface Parameters Monitoring", RFC 3144, + August 2001. + + [RFC3287] Bierman, A., "Remote Monitoring MIB Extensions for + Differentiated Services", RFC 3287, July 2002. + + [RFC3273] Waldbusser, S., "Remote Network Monitoring + Management Information Base for High Capacity + Networks", RFC 3273, July 2002. + + [APM] Waldbusser, S., "Application performance + measurement MIB", Work in Progress. + + [RFC3395] Bierman, A., Bucci, C., Dietz, R. and A. Warth, + "Remote Network Monitoring MIB Protocol Identifier + Reference Extensions", RFC 3395, September 2002. + + [TPM] Dietz, R. and R.G.Cole, "Application Performance + Measurement Framework Transport Performance + Metrics MIB", Work in Progress. + + [SSPM] Kalbfleisch, K., Cole, R.G. and D. Romascanu, + "Definition of Managed Objects for Synthetic + Sources for Performance Monitoring Algorithms", + Work in Progress. + + [RFC3434] Bierman, A. and K. McCloghrie, "Remote Monitoring + MIB Extensions for High Capacity Alarms", RFC + 3434, December 2002. + + [RFC2233] McCloghrie, K. and F. Kastenholz, "The Interfaces + Group MIB Using SMIv2", RFC 2233, November 1997. + + [RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces + Group MIB", RFC 2863, June 2000. + + [RFC2330] Paxson, V., Almes, G., Mahdavi, J. and M. Mathis, + "Framework for IP Performance Metrics", RFC 2330, + May 1998. + + + + + + +Waldbusser, et al. Informational [Page 28] + +RFC 3577 Introduction to RMON August 2003 + + + [OWDP] Shalunov, S., Teitelbaum, B. and M. Zekauskas, "A + One-way Active Measurement Protocol", Work in + Progress. + + [RAQMON-FRAMEWORK] Siddiqui, A., Romascanu, D. and E. Golovinsky, + "Real-time Application Quality of Service + Monitoring (RAQMON) Framework", Work in Progress. + + [RAQMON-MIB] Siddiqui, A., Romascanu, D., Golovinsky, E. and R. + Smith, "Real-Time Application Quality of Service + Monitoring (RAQMON) MIB", Work in Progress. + +9. Security Considerations + + This document is a description of existing documents and as such it + does not have any security impact. In order to understand the + security-related issues of the different RMON documents, the reader + is directed to the Security Considerations sections of the respective + documents. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Waldbusser, et al. Informational [Page 29] + +RFC 3577 Introduction to RMON August 2003 + + +10. Authors' Addresses + + Steve Waldbusser + + Phone: +1 650-948-6500 + Fax: +1 650-745-0671 + EMail: waldbusser@nextbeacon.com + + + Carl W. Kalbfleisch + NTT/VERIO + 8700 Stemmons Freeway, Suite 211 + Dallas, TX 75247 + United States + + Phone: +1 972-906-2034 + EMail: cwk@verio.net + + + Robert G. Cole + AT&T Labs + Network Design and Performance Analysis Department + 330 Saint John Street, 2nd Floor + Havre de Grace, MD 21078 + United States + + Phone: +1 410-939-8732 + Fax: +1 410-939-8732 + EMail: rgcole@att.com + + + Dan Romascanu + Avaya + Atidim Technology Park, Bldg. #3 + Tel Aviv, 61131 + Israel + + Phone: +972-3-645-8414 + EMail: dromasca@avaya.com + + + + + + + + + + + + +Waldbusser, et al. Informational [Page 30] + +RFC 3577 Introduction to RMON August 2003 + + +11. Full Copyright Statement + + Copyright (C) The Internet Society (2003). All Rights Reserved. + + This document and translations of it may be copied and furnished to + others, and derivative works that comment on or otherwise explain it + or assist in its implementation may be prepared, copied, published + and distributed, in whole or in part, without restriction of any + kind, provided that the above copyright notice and this paragraph are + included on all such copies and derivative works. However, this + document itself may not be modified in any way, such as by removing + the copyright notice or references to the Internet Society or other + Internet organizations, except as needed for the purpose of + developing Internet standards in which case the procedures for + copyrights defined in the Internet Standards process must be + followed, or as required to translate it into languages other than + English. + + The limited permissions granted above are perpetual and will not be + revoked by the Internet Society or its successors or assignees. + + This document and the information contained herein is provided on an + "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + + + + + + + + + + + + + + +Waldbusser, et al. Informational [Page 31] + -- cgit v1.2.3