From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc3629.txt | 787 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 787 insertions(+) create mode 100644 doc/rfc/rfc3629.txt (limited to 'doc/rfc/rfc3629.txt') diff --git a/doc/rfc/rfc3629.txt b/doc/rfc/rfc3629.txt new file mode 100644 index 0000000..e3070c7 --- /dev/null +++ b/doc/rfc/rfc3629.txt @@ -0,0 +1,787 @@ + + + + + + +Network Working Group F. Yergeau +Request for Comments: 3629 Alis Technologies +STD: 63 November 2003 +Obsoletes: 2279 +Category: Standards Track + + + UTF-8, a transformation format of ISO 10646 + +Status of this Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (2003). All Rights Reserved. + +Abstract + + ISO/IEC 10646-1 defines a large character set called the Universal + Character Set (UCS) which encompasses most of the world's writing + systems. The originally proposed encodings of the UCS, however, were + not compatible with many current applications and protocols, and this + has led to the development of UTF-8, the object of this memo. UTF-8 + has the characteristic of preserving the full US-ASCII range, + providing compatibility with file systems, parsers and other software + that rely on US-ASCII values but are transparent to other values. + This memo obsoletes and replaces RFC 2279. + +Table of Contents + + 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2 + 2. Notational conventions . . . . . . . . . . . . . . . . . . . . 3 + 3. UTF-8 definition . . . . . . . . . . . . . . . . . . . . . . . 4 + 4. Syntax of UTF-8 Byte Sequences . . . . . . . . . . . . . . . . 5 + 5. Versions of the standards . . . . . . . . . . . . . . . . . . 6 + 6. Byte order mark (BOM) . . . . . . . . . . . . . . . . . . . . 6 + 7. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 + 8. MIME registration . . . . . . . . . . . . . . . . . . . . . . 9 + 9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 10 + 10. Security Considerations . . . . . . . . . . . . . . . . . . . 10 + 11. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 11 + 12. Changes from RFC 2279 . . . . . . . . . . . . . . . . . . . . 11 + 13. Normative References . . . . . . . . . . . . . . . . . . . . . 12 + + + +Yergeau Standards Track [Page 1] + +RFC 3629 UTF-8 November 2003 + + + 14. Informative References . . . . . . . . . . . . . . . . . . . . 12 + 15. URI's . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 + 16. Intellectual Property Statement . . . . . . . . . . . . . . . 13 + 17. Author's Address . . . . . . . . . . . . . . . . . . . . . . . 13 + 18. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 14 + +1. Introduction + + ISO/IEC 10646 [ISO.10646] defines a large character set called the + Universal Character Set (UCS), which encompasses most of the world's + writing systems. The same set of characters is defined by the + Unicode standard [UNICODE], which further defines additional + character properties and other application details of great interest + to implementers. Up to the present time, changes in Unicode and + amendments and additions to ISO/IEC 10646 have tracked each other, so + that the character repertoires and code point assignments have + remained in sync. The relevant standardization committees have + committed to maintain this very useful synchronism. + + ISO/IEC 10646 and Unicode define several encoding forms of their + common repertoire: UTF-8, UCS-2, UTF-16, UCS-4 and UTF-32. In an + encoding form, each character is represented as one or more encoding + units. All standard UCS encoding forms except UTF-8 have an encoding + unit larger than one octet, making them hard to use in many current + applications and protocols that assume 8 or even 7 bit characters. + + UTF-8, the object of this memo, has a one-octet encoding unit. It + uses all bits of an octet, but has the quality of preserving the full + US-ASCII [US-ASCII] range: US-ASCII characters are encoded in one + octet having the normal US-ASCII value, and any octet with such a + value can only stand for a US-ASCII character, and nothing else. + + UTF-8 encodes UCS characters as a varying number of octets, where the + number of octets, and the value of each, depend on the integer value + assigned to the character in ISO/IEC 10646 (the character number, + a.k.a. code position, code point or Unicode scalar value). This + encoding form has the following characteristics (all values are in + hexadecimal): + + o Character numbers from U+0000 to U+007F (US-ASCII repertoire) + correspond to octets 00 to 7F (7 bit US-ASCII values). A direct + consequence is that a plain ASCII string is also a valid UTF-8 + string. + + + + + + + + +Yergeau Standards Track [Page 2] + +RFC 3629 UTF-8 November 2003 + + + o US-ASCII octet values do not appear otherwise in a UTF-8 encoded + character stream. This provides compatibility with file systems + or other software (e.g., the printf() function in C libraries) + that parse based on US-ASCII values but are transparent to other + values. + + o Round-trip conversion is easy between UTF-8 and other encoding + forms. + + o The first octet of a multi-octet sequence indicates the number of + octets in the sequence. + + o The octet values C0, C1, F5 to FF never appear. + + o Character boundaries are easily found from anywhere in an octet + stream. + + o The byte-value lexicographic sorting order of UTF-8 strings is the + same as if ordered by character numbers. Of course this is of + limited interest since a sort order based on character numbers is + almost never culturally valid. + + o The Boyer-Moore fast search algorithm can be used with UTF-8 data. + + o UTF-8 strings can be fairly reliably recognized as such by a + simple algorithm, i.e., the probability that a string of + characters in any other encoding appears as valid UTF-8 is low, + diminishing with increasing string length. + + UTF-8 was devised in September 1992 by Ken Thompson, guided by design + criteria specified by Rob Pike, with the objective of defining a UCS + transformation format usable in the Plan9 operating system in a non- + disruptive manner. Thompson's design was stewarded through + standardization by the X/Open Joint Internationalization Group XOJIG + (see [FSS_UTF]), bearing the names FSS-UTF (variant FSS/UTF), UTF-2 + and finally UTF-8 along the way. + +2. Notational conventions + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this + document are to be interpreted as described in [RFC2119]. + + UCS characters are designated by the U+HHHH notation, where HHHH is a + string of from 4 to 6 hexadecimal digits representing the character + number in ISO/IEC 10646. + + + + + +Yergeau Standards Track [Page 3] + +RFC 3629 UTF-8 November 2003 + + +3. UTF-8 definition + + UTF-8 is defined by the Unicode Standard [UNICODE]. Descriptions and + formulae can also be found in Annex D of ISO/IEC 10646-1 [ISO.10646] + + In UTF-8, characters from the U+0000..U+10FFFF range (the UTF-16 + accessible range) are encoded using sequences of 1 to 4 octets. The + only octet of a "sequence" of one has the higher-order bit set to 0, + the remaining 7 bits being used to encode the character number. In a + sequence of n octets, n>1, the initial octet has the n higher-order + bits set to 1, followed by a bit set to 0. The remaining bit(s) of + that octet contain bits from the number of the character to be + encoded. The following octet(s) all have the higher-order bit set to + 1 and the following bit set to 0, leaving 6 bits in each to contain + bits from the character to be encoded. + + The table below summarizes the format of these different octet types. + The letter x indicates bits available for encoding bits of the + character number. + + Char. number range | UTF-8 octet sequence + (hexadecimal) | (binary) + --------------------+--------------------------------------------- + 0000 0000-0000 007F | 0xxxxxxx + 0000 0080-0000 07FF | 110xxxxx 10xxxxxx + 0000 0800-0000 FFFF | 1110xxxx 10xxxxxx 10xxxxxx + 0001 0000-0010 FFFF | 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx + + Encoding a character to UTF-8 proceeds as follows: + + 1. Determine the number of octets required from the character number + and the first column of the table above. It is important to note + that the rows of the table are mutually exclusive, i.e., there is + only one valid way to encode a given character. + + 2. Prepare the high-order bits of the octets as per the second + column of the table. + + 3. Fill in the bits marked x from the bits of the character number, + expressed in binary. Start by putting the lowest-order bit of + the character number in the lowest-order position of the last + octet of the sequence, then put the next higher-order bit of the + character number in the next higher-order position of that octet, + etc. When the x bits of the last octet are filled in, move on to + the next to last octet, then to the preceding one, etc. until all + x bits are filled in. + + + + + +Yergeau Standards Track [Page 4] + +RFC 3629 UTF-8 November 2003 + + + The definition of UTF-8 prohibits encoding character numbers between + U+D800 and U+DFFF, which are reserved for use with the UTF-16 + encoding form (as surrogate pairs) and do not directly represent + characters. When encoding in UTF-8 from UTF-16 data, it is necessary + to first decode the UTF-16 data to obtain character numbers, which + are then encoded in UTF-8 as described above. This contrasts with + CESU-8 [CESU-8], which is a UTF-8-like encoding that is not meant for + use on the Internet. CESU-8 operates similarly to UTF-8 but encodes + the UTF-16 code values (16-bit quantities) instead of the character + number (code point). This leads to different results for character + numbers above 0xFFFF; the CESU-8 encoding of those characters is NOT + valid UTF-8. + + Decoding a UTF-8 character proceeds as follows: + + 1. Initialize a binary number with all bits set to 0. Up to 21 bits + may be needed. + + 2. Determine which bits encode the character number from the number + of octets in the sequence and the second column of the table + above (the bits marked x). + + 3. Distribute the bits from the sequence to the binary number, first + the lower-order bits from the last octet of the sequence and + proceeding to the left until no x bits are left. The binary + number is now equal to the character number. + + Implementations of the decoding algorithm above MUST protect against + decoding invalid sequences. For instance, a naive implementation may + decode the overlong UTF-8 sequence C0 80 into the character U+0000, + or the surrogate pair ED A1 8C ED BE B4 into U+233B4. Decoding + invalid sequences may have security consequences or cause other + problems. See Security Considerations (Section 10) below. + +4. Syntax of UTF-8 Byte Sequences + + For the convenience of implementors using ABNF, a definition of UTF-8 + in ABNF syntax is given here. + + A UTF-8 string is a sequence of octets representing a sequence of UCS + characters. An octet sequence is valid UTF-8 only if it matches the + following syntax, which is derived from the rules for encoding UTF-8 + and is expressed in the ABNF of [RFC2234]. + + UTF8-octets = *( UTF8-char ) + UTF8-char = UTF8-1 / UTF8-2 / UTF8-3 / UTF8-4 + UTF8-1 = %x00-7F + UTF8-2 = %xC2-DF UTF8-tail + + + +Yergeau Standards Track [Page 5] + +RFC 3629 UTF-8 November 2003 + + + UTF8-3 = %xE0 %xA0-BF UTF8-tail / %xE1-EC 2( UTF8-tail ) / + %xED %x80-9F UTF8-tail / %xEE-EF 2( UTF8-tail ) + UTF8-4 = %xF0 %x90-BF 2( UTF8-tail ) / %xF1-F3 3( UTF8-tail ) / + %xF4 %x80-8F 2( UTF8-tail ) + UTF8-tail = %x80-BF + + NOTE -- The authoritative definition of UTF-8 is in [UNICODE]. This + grammar is believed to describe the same thing Unicode describes, but + does not claim to be authoritative. Implementors are urged to rely + on the authoritative source, rather than on this ABNF. + +5. Versions of the standards + + ISO/IEC 10646 is updated from time to time by publication of + amendments and additional parts; similarly, new versions of the + Unicode standard are published over time. Each new version obsoletes + and replaces the previous one, but implementations, and more + significantly data, are not updated instantly. + + In general, the changes amount to adding new characters, which does + not pose particular problems with old data. In 1996, Amendment 5 to + the 1993 edition of ISO/IEC 10646 and Unicode 2.0 moved and expanded + the Korean Hangul block, thereby making any previous data containing + Hangul characters invalid under the new version. Unicode 2.0 has the + same difference from Unicode 1.1. The justification for allowing + such an incompatible change was that there were no major + implementations and no significant amounts of data containing Hangul. + The incident has been dubbed the "Korean mess", and the relevant + committees have pledged to never, ever again make such an + incompatible change (see Unicode Consortium Policies [1]). + + New versions, and in particular any incompatible changes, have + consequences regarding MIME charset labels, to be discussed in MIME + registration (Section 8). + +6. Byte order mark (BOM) + + The UCS character U+FEFF "ZERO WIDTH NO-BREAK SPACE" is also known + informally as "BYTE ORDER MARK" (abbreviated "BOM"). This character + can be used as a genuine "ZERO WIDTH NO-BREAK SPACE" within text, but + the BOM name hints at a second possible usage of the character: to + prepend a U+FEFF character to a stream of UCS characters as a + "signature". A receiver of such a serialized stream may then use the + initial character as a hint that the stream consists of UCS + characters and also to recognize which UCS encoding is involved and, + with encodings having a multi-octet encoding unit, as a way to + + + + + +Yergeau Standards Track [Page 6] + +RFC 3629 UTF-8 November 2003 + + + recognize the serialization order of the octets. UTF-8 having a + single-octet encoding unit, this last function is useless and the BOM + will always appear as the octet sequence EF BB BF. + + It is important to understand that the character U+FEFF appearing at + any position other than the beginning of a stream MUST be interpreted + with the semantics for the zero-width non-breaking space, and MUST + NOT be interpreted as a signature. When interpreted as a signature, + the Unicode standard suggests than an initial U+FEFF character may be + stripped before processing the text. Such stripping is necessary in + some cases (e.g., when concatenating two strings, because otherwise + the resulting string may contain an unintended "ZERO WIDTH NO-BREAK + SPACE" at the connection point), but might affect an external process + at a different layer (such as a digital signature or a count of the + characters) that is relying on the presence of all characters in the + stream. It is therefore RECOMMENDED to avoid stripping an initial + U+FEFF interpreted as a signature without a good reason, to ignore it + instead of stripping it when appropriate (such as for display) and to + strip it only when really necessary. + + U+FEFF in the first position of a stream MAY be interpreted as a + zero-width non-breaking space, and is not always a signature. In an + attempt at diminishing this uncertainty, Unicode 3.2 adds a new + character, U+2060 "WORD JOINER", with exactly the same semantics and + usage as U+FEFF except for the signature function, and strongly + recommends its exclusive use for expressing word-joining semantics. + Eventually, following this recommendation will make it all but + certain that any initial U+FEFF is a signature, not an intended "ZERO + WIDTH NO-BREAK SPACE". + + In the meantime, the uncertainty unfortunately remains and may affect + Internet protocols. Protocol specifications MAY restrict usage of + U+FEFF as a signature in order to reduce or eliminate the potential + ill effects of this uncertainty. In the interest of striking a + balance between the advantages (reduction of uncertainty) and + drawbacks (loss of the signature function) of such restrictions, it + is useful to distinguish a few cases: + + o A protocol SHOULD forbid use of U+FEFF as a signature for those + textual protocol elements that the protocol mandates to be always + UTF-8, the signature function being totally useless in those + cases. + + o A protocol SHOULD also forbid use of U+FEFF as a signature for + those textual protocol elements for which the protocol provides + character encoding identification mechanisms, when it is expected + that implementations of the protocol will be in a position to + always use the mechanisms properly. This will be the case when + + + +Yergeau Standards Track [Page 7] + +RFC 3629 UTF-8 November 2003 + + + the protocol elements are maintained tightly under the control of + the implementation from the time of their creation to the time of + their (properly labeled) transmission. + + o A protocol SHOULD NOT forbid use of U+FEFF as a signature for + those textual protocol elements for which the protocol does not + provide character encoding identification mechanisms, when a ban + would be unenforceable, or when it is expected that + implementations of the protocol will not be in a position to + always use the mechanisms properly. The latter two cases are + likely to occur with larger protocol elements such as MIME + entities, especially when implementations of the protocol will + obtain such entities from file systems, from protocols that do not + have encoding identification mechanisms for payloads (such as FTP) + or from other protocols that do not guarantee proper + identification of character encoding (such as HTTP). + + When a protocol forbids use of U+FEFF as a signature for a certain + protocol element, then any initial U+FEFF in that protocol element + MUST be interpreted as a "ZERO WIDTH NO-BREAK SPACE". When a + protocol does NOT forbid use of U+FEFF as a signature for a certain + protocol element, then implementations SHOULD be prepared to handle a + signature in that element and react appropriately: using the + signature to identify the character encoding as necessary and + stripping or ignoring the signature as appropriate. + +7. Examples + + The character sequence U+0041 U+2262 U+0391 U+002E "A." is encoded in UTF-8 as follows: + + --+--------+-----+-- + 41 E2 89 A2 CE 91 2E + --+--------+-----+-- + + The character sequence U+D55C U+AD6D U+C5B4 (Korean "hangugeo", + meaning "the Korean language") is encoded in UTF-8 as follows: + + --------+--------+-------- + ED 95 9C EA B5 AD EC 96 B4 + --------+--------+-------- + + The character sequence U+65E5 U+672C U+8A9E (Japanese "nihongo", + meaning "the Japanese language") is encoded in UTF-8 as follows: + + --------+--------+-------- + E6 97 A5 E6 9C AC E8 AA 9E + --------+--------+-------- + + + +Yergeau Standards Track [Page 8] + +RFC 3629 UTF-8 November 2003 + + + The character U+233B4 (a Chinese character meaning 'stump of tree'), + prepended with a UTF-8 BOM, is encoded in UTF-8 as follows: + + --------+----------- + EF BB BF F0 A3 8E B4 + --------+----------- + +8. MIME registration + + This memo serves as the basis for registration of the MIME charset + parameter for UTF-8, according to [RFC2978]. The charset parameter + value is "UTF-8". This string labels media types containing text + consisting of characters from the repertoire of ISO/IEC 10646 + including all amendments at least up to amendment 5 of the 1993 + edition (Korean block), encoded to a sequence of octets using the + encoding scheme outlined above. UTF-8 is suitable for use in MIME + content types under the "text" top-level type. + + It is noteworthy that the label "UTF-8" does not contain a version + identification, referring generically to ISO/IEC 10646. This is + intentional, the rationale being as follows: + + A MIME charset label is designed to give just the information needed + to interpret a sequence of bytes received on the wire into a sequence + of characters, nothing more (see [RFC2045], section 2.2). As long as + a character set standard does not change incompatibly, version + numbers serve no purpose, because one gains nothing by learning from + the tag that newly assigned characters may be received that one + doesn't know about. The tag itself doesn't teach anything about the + new characters, which are going to be received anyway. + + Hence, as long as the standards evolve compatibly, the apparent + advantage of having labels that identify the versions is only that, + apparent. But there is a disadvantage to such version-dependent + labels: when an older application receives data accompanied by a + newer, unknown label, it may fail to recognize the label and be + completely unable to deal with the data, whereas a generic, known + label would have triggered mostly correct processing of the data, + which may well not contain any new characters. + + Now the "Korean mess" (ISO/IEC 10646 amendment 5) is an incompatible + change, in principle contradicting the appropriateness of a version + independent MIME charset label as described above. But the + compatibility problem can only appear with data containing Korean + Hangul characters encoded according to Unicode 1.1 (or equivalently + ISO/IEC 10646 before amendment 5), and there is arguably no such data + to worry about, this being the very reason the incompatible change + was deemed acceptable. + + + +Yergeau Standards Track [Page 9] + +RFC 3629 UTF-8 November 2003 + + + In practice, then, a version-independent label is warranted, provided + the label is understood to refer to all versions after Amendment 5, + and provided no incompatible change actually occurs. Should + incompatible changes occur in a later version of ISO/IEC 10646, the + MIME charset label defined here will stay aligned with the previous + version until and unless the IETF specifically decides otherwise. + +9. IANA Considerations + + The entry for UTF-8 in the IANA charset registry has been updated to + point to this memo. + +10. Security Considerations + + Implementers of UTF-8 need to consider the security aspects of how + they handle illegal UTF-8 sequences. It is conceivable that in some + circumstances an attacker would be able to exploit an incautious + UTF-8 parser by sending it an octet sequence that is not permitted by + the UTF-8 syntax. + + A particularly subtle form of this attack can be carried out against + a parser which performs security-critical validity checks against the + UTF-8 encoded form of its input, but interprets certain illegal octet + sequences as characters. For example, a parser might prohibit the + NUL character when encoded as the single-octet sequence 00, but + erroneously allow the illegal two-octet sequence C0 80 and interpret + it as a NUL character. Another example might be a parser which + prohibits the octet sequence 2F 2E 2E 2F ("/../"), yet permits the + illegal octet sequence 2F C0 AE 2E 2F. This last exploit has + actually been used in a widespread virus attacking Web servers in + 2001; thus, the security threat is very real. + + Another security issue occurs when encoding to UTF-8: the ISO/IEC + 10646 description of UTF-8 allows encoding character numbers up to + U+7FFFFFFF, yielding sequences of up to 6 bytes. There is therefore + a risk of buffer overflow if the range of character numbers is not + explicitly limited to U+10FFFF or if buffer sizing doesn't take into + account the possibility of 5- and 6-byte sequences. + + Security may also be impacted by a characteristic of several + character encodings, including UTF-8: the "same thing" (as far as a + user can tell) can be represented by several distinct character + sequences. For instance, an e with acute accent can be represented + by the precomposed U+00E9 E ACUTE character or by the canonically + equivalent sequence U+0065 U+0301 (E + COMBINING ACUTE). Even though + UTF-8 provides a single byte sequence for each character sequence, + the existence of multiple character sequences for "the same thing" + may have security consequences whenever string matching, indexing, + + + +Yergeau Standards Track [Page 10] + +RFC 3629 UTF-8 November 2003 + + + searching, sorting, regular expression matching and selection are + involved. An example would be string matching of an identifier + appearing in a credential and in access control list entries. This + issue is amenable to solutions based on Unicode Normalization Forms, + see [UAX15]. + +11. Acknowledgements + + The following have participated in the drafting and discussion of + this memo: James E. Agenbroad, Harald Alvestrand, Andries Brouwer, + Mark Davis, Martin J. Duerst, Patrick Faltstrom, Ned Freed, David + Goldsmith, Tony Hansen, Edwin F. Hart, Paul Hoffman, David Hopwood, + Simon Josefsson, Kent Karlsson, Dan Kohn, Markus Kuhn, Michael Kung, + Alain LaBonte, Ira McDonald, Alexey Melnikov, MURATA Makoto, John + Gardiner Myers, Chris Newman, Dan Oscarsson, Roozbeh Pournader, + Murray Sargent, Markus Scherer, Keld Simonsen, Arnold Winkler, + Kenneth Whistler and Misha Wolf. + +12. Changes from RFC 2279 + + o Restricted the range of characters to 0000-10FFFF (the UTF-16 + accessible range). + + o Made Unicode the source of the normative definition of UTF-8, + keeping ISO/IEC 10646 as the reference for characters. + + o Straightened out terminology. UTF-8 now described in terms of an + encoding form of the character number. UCS-2 and UCS-4 almost + disappeared. + + o Turned the note warning against decoding of invalid sequences into + a normative MUST NOT. + + o Added a new section about the UTF-8 BOM, with advice for + protocols. + + o Removed suggested UNICODE-1-1-UTF-8 MIME charset registration. + + o Added an ABNF syntax for valid UTF-8 octet sequences + + o Expanded Security Considerations section, in particular impact of + Unicode normalization + + + + + + + + + +Yergeau Standards Track [Page 11] + +RFC 3629 UTF-8 November 2003 + + +13. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [ISO.10646] International Organization for Standardization, + "Information Technology - Universal Multiple-octet coded + Character Set (UCS)", ISO/IEC Standard 10646, comprised + of ISO/IEC 10646-1:2000, "Information technology -- + Universal Multiple-Octet Coded Character Set (UCS) -- + Part 1: Architecture and Basic Multilingual Plane", + ISO/IEC 10646-2:2001, "Information technology -- + Universal Multiple-Octet Coded Character Set (UCS) -- + Part 2: Supplementary Planes" and ISO/IEC 10646- + 1:2000/Amd 1:2002, "Mathematical symbols and other + characters". + + [UNICODE] The Unicode Consortium, "The Unicode Standard -- Version + 4.0", defined by The Unicode Standard, Version 4.0 + (Boston, MA, Addison-Wesley, 2003. ISBN 0-321-18578-1), + April 2003, . + +14. Informative References + + [CESU-8] Phipps, T., "Unicode Technical Report #26: Compatibility + Encoding Scheme for UTF-16: 8-Bit (CESU-8)", UTR 26, + April 2002, + . + + [FSS_UTF] X/Open Company Ltd., "X/Open Preliminary Specification -- + File System Safe UCS Transformation Format (FSS-UTF)", + May 1993, . + + [RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail + Extensions (MIME) Part One: Format of Internet Message + Bodies", RFC 2045, November 1996. + + [RFC2234] Crocker, D. and P. Overell, "Augmented BNF for Syntax + Specifications: ABNF", RFC 2234, November 1997. + + [RFC2978] Freed, N. and J. Postel, "IANA Charset Registration + Procedures", BCP 19, RFC 2978, October 2000. + + + + + + + +Yergeau Standards Track [Page 12] + +RFC 3629 UTF-8 November 2003 + + + [UAX15] Davis, M. and M. Duerst, "Unicode Standard Annex #15: + Unicode Normalization Forms", An integral part of The + Unicode Standard, Version 4.0.0, April 2003, . + + [US-ASCII] American National Standards Institute, "Coded Character + Set - 7-bit American Standard Code for Information + Interchange", ANSI X3.4, 1986. + +15. URIs + + [1] + +16. Intellectual Property Statement + + The IETF takes no position regarding the validity or scope of any + intellectual property or other rights that might be claimed to + pertain to the implementation or use of the technology described in + this document or the extent to which any license under such rights + might or might not be available; neither does it represent that it + has made any effort to identify any such rights. Information on the + IETF's procedures with respect to rights in standards-track and + standards-related documentation can be found in BCP-11. Copies of + claims of rights made available for publication and any assurances of + licenses to be made available, or the result of an attempt made to + obtain a general license or permission for the use of such + proprietary rights by implementors or users of this specification can + be obtained from the IETF Secretariat. + + The IETF invites any interested party to bring to its attention any + copyrights, patents or patent applications, or other proprietary + rights which may cover technology that may be required to practice + this standard. Please address the information to the IETF Executive + Director. + +17. Author's Address + + Francois Yergeau + Alis Technologies + 100, boul. Alexis-Nihon, bureau 600 + Montreal, QC H4M 2P2 + Canada + + Phone: +1 514 747 2547 + Fax: +1 514 747 2561 + EMail: fyergeau@alis.com + + + + + +Yergeau Standards Track [Page 13] + +RFC 3629 UTF-8 November 2003 + + +18. Full Copyright Statement + + Copyright (C) The Internet Society (2003). All Rights Reserved. + + This document and translations of it may be copied and furnished to + others, and derivative works that comment on or otherwise explain it + or assist in its implementation may be prepared, copied, published + and distributed, in whole or in part, without restriction of any + kind, provided that the above copyright notice and this paragraph are + included on all such copies and derivative works. However, this + document itself may not be modified in any way, such as by removing + the copyright notice or references to the Internet Society or other + Internet organizations, except as needed for the purpose of + developing Internet standards in which case the procedures for + copyrights defined in the Internet Standards process must be + followed, or as required to translate it into languages other than + English. + + The limited permissions granted above are perpetual and will not be + revoked by the Internet Society or its successors or assignees. + + This document and the information contained herein is provided on an + "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + + + + + + + + + + + + + + +Yergeau Standards Track [Page 14] + -- cgit v1.2.3