From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc3729.txt | 3419 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3419 insertions(+) create mode 100644 doc/rfc/rfc3729.txt (limited to 'doc/rfc/rfc3729.txt') diff --git a/doc/rfc/rfc3729.txt b/doc/rfc/rfc3729.txt new file mode 100644 index 0000000..7999b3f --- /dev/null +++ b/doc/rfc/rfc3729.txt @@ -0,0 +1,3419 @@ + + + + + + +Network Working Group S. Waldbusser +Request for Comments: 3729 March 2004 +Category: Standards Track + + + Application Performance Measurement MIB + +Status of this Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (2004). All Rights Reserved. + +Abstract + + This memo defines a portion of the Management Information Base (MIB) + for use with network management protocols in TCP/IP-based internets. + In particular, it defines objects for measuring the application + performance as experienced by end-users. + +Table of Contents + + 1. The Internet-Standard Management Framework . . . . . . . . . . 2 + 2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 + 2.1. Report Aggregation . . . . . . . . . . . . . . . . . . . 4 + 2.2. AppLocalIndex Linkages . . . . . . . . . . . . . . . . . 8 + 2.3. Measurement Methodology. . . . . . . . . . . . . . . . . 10 + 2.4. Instrumentation Architectures. . . . . . . . . . . . . . 10 + 2.4.1. Application Directory Caching. . . . . . . . . . 10 + 2.4.2. Push Model . . . . . . . . . . . . . . . . . . . 11 + 2.5. Structure of this MIB Module . . . . . . . . . . . . . . 12 + 2.5.1. The APM Application Directory Group. . . . . . . 13 + 2.5.2. The APM User Defined Applications Group. . . . . 13 + 2.5.3. The APM Report Group . . . . . . . . . . . . . . 13 + 2.5.4. The APM Transaction Group. . . . . . . . . . . . 13 + 2.5.5. The APM Exception Group. . . . . . . . . . . . . 14 + 2.5.6. The APM Notification Group . . . . . . . . . . . 14 + 3. Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . 14 + 4. Security Considerations. . . . . . . . . . . . . . . . . . . . 58 + 5. References . . . . . . . . . . . . . . . . . . . . . . . . . . 60 + 5.1. Normative References . . . . . . . . . . . . . . . . . . 60 + 5.2. Informative References . . . . . . . . . . . . . . . . . 60 + + + +Waldbusser Standards Track [Page 1] + +RFC 3729 APM MIB March 2004 + + + 6. Author's Address . . . . . . . . . . . . . . . . . . . . . . . 60 + 7. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 61 + +1. The Internet-Standard Management Framework + + For a detailed overview of the documents that describe the current + Internet-Standard Management Framework, please refer to section 7 of + RFC 3410 [8]. + + Managed objects are accessed via a virtual information store, termed + the Management Information Base or MIB. MIB objects are generally + accessed through the Simple Network Management Protocol (SNMP). + Objects in the MIB are defined using the mechanisms defined in the + Structure of Management Information (SMI). This memo specifies a MIB + module that is compliant to the SMIv2, which is described in STD 58, + RFC 2578 [1], STD 58, RFC 2579 [2] and STD 58, RFC 2580 [3]. + +2. Overview + + This document continues the architecture created in the RMON MIB [7] + by providing analysis of application performance as experienced by + end-users. + + Application performance measurement measures the quality of service + delivered to end-users by applications. With this perspective, a + true end-to-end view of the IT infrastructure results, combining the + performance of the application, desktop, network, and server, as well + as any positive or negative interactions between these components. + + Despite all the technically sophisticated ways in which networking + and system resources can be measured, human end-users perceive only + two things about an application: availability and responsiveness. + + Availability - The percentage of the time that the application is + ready to give a user service. + + Responsiveness - The speed at which the application delivers the + requested service. + + A transaction is an action initiated by a user that starts and + completes a distributed processing function. A transaction begins + when a user initiates a request for service (i.e., pushing a submit + button) and ends when the work is completed (i.e., information is + provided or a confirmation is delivered). A transaction is the + fundamental item measured by the APM MIB. + + + + + + +Waldbusser Standards Track [Page 2] + +RFC 3729 APM MIB March 2004 + + + A failed transaction is a transaction that fails to provide the + service requested by the end user, regardless of whether it is due to + a processing failure or transport failure. + + An application protocol (e.g., POP3) may implement different commands + or application "verbs" (e.g., POP3 Login and POP3 Retrieval). It + will often be interesting to monitor these verbs separately because: + + 1) The verbs may have widely differing performance characteristics + (in fact some may be response time oriented while others are + throughput oriented) + 2) The verbs have varying business significance + 3) It provides more granularity of exactly what might be performing + poorly + + This MIB Module allows the measurement of a parent application, its + component verbs, or both. If monitoring both, one can watch the + top-level application and then drill down to the verbs when trouble + is spotted to learn which subcomponents are in trouble. Each + application verb is registered separately in the Protocol Directory + [5] [6] as a child of its parent application. + + Application protocols implement one of three different types of + transactions: transaction-oriented, throughput-oriented, or + streaming-oriented. While the availability metric is the same for + all three types, the responsiveness metric varies: + + Transaction-Oriented: These transactions have a fairly constant + workload to perform for all transactions. In particular, to the + degree that the workload may vary, it doesn't vary based on the + amount of data to be transferred but based on the parameters of + the transaction. The responsiveness metric for transaction- + oriented applications is application response time, the elapsed + time between the user's request for service (e.g., pushing the + submit button) and the completion of the request (e.g., displaying + the results) and is measured in milliseconds. This is commonly + referred to as end-user response time. + + Throughput-Oriented: These transactions have widely varying + workloads based on the amount of data requested. The + responsiveness metric for throughput-oriented applications is + kilobits per second. + + Streaming-Oriented: These transactions deliver data at a constant + metered rate of speed regardless of excess capacity in the + networking and computing infrastructure. However, when the + infrastructures cannot deliver data at this speed, interruption of + service or degradation of service can result. The responsiveness + + + +Waldbusser Standards Track [Page 3] + +RFC 3729 APM MIB March 2004 + + + metric for streaming-oriented applications is the signal quality + ratio of time that the service is degraded or interrupted to the + total service time. This metric is measured in parts per million. + +2.1. Report Aggregation + + This MIB Module provides functions to aggregate measurements into + higher level summaries. + + Every transaction is identified by its application, server, and + client and has an availability measure as well as a responsiveness + measure. The appropriate responsiveness measure is context-sensitive + depending on whether the application is transaction-oriented, + throughput-oriented, or streaming- oriented. For example, in a 5 + minute period several transactions might be recorded: + + Application Client Server Successful Responsiveness + HTTP Jim Sales 1 6 sec. + SAP/R3 Jane Finance 1 17 sec. + HTTP Joe HR 0 - + FTP Jim FTP 1 212 Kbps + HTTP Joe HR 1 25 sec. + RealVideo Joe Videoconf 1 100.0% + HTTP Jane HR 1 5 sec. + + These transactions can be aggregated in several ways, providing + statistical summaries - for example summarizing all HTTP + transactions, or all HTTP transactions to the HR Server. Note that + data from different applications may not be summarized because: + + 1. The performance characteristics of different applications differ + widely enough to render statistical analysis meaningless. + + 2. The responsiveness metrics of different applications may be + different, making a statistical analysis impossible (in other + words, one application may be transaction-oriented, while another + is throughput-oriented). + + Aggregating transactions collected over a period requires an + aggregation algorithm. In this MIB Module, transaction aggregation + always results in the following statistics: + + TransactionCount + The total number of transactions during this period + + + + + + + +Waldbusser Standards Track [Page 4] + +RFC 3729 APM MIB March 2004 + + + SuccessfulTransactions + The total number of transactions that were successful. The + management station can derive the percent success by dividing + SuccessfulTransactions by the TransactionCount. + + ResponsivenessMean + The average of the responsiveness metric for all aggregated + transactions that completed successfully. + + ResponsivenessMin + The minimum responsiveness metric for all aggregated transactions + that completed successfully. + + ResponsivenessMax + The maximum responsiveness metric for all aggregated transactions + that completed successfully. + + ResponsivenessBx + The count of successful transactions whose responsiveness metric + fell into the range specified for Bx. There are 7 buckets + specified. Because the performance of different applications + varies widely, the bucket ranges are specified separately for each + application (in the apmAppDirTable) so that they may be tuned to + typical performance of each application. + + For example, when aggregating the previous set of transactions by + application we get (for simplicity the example only shows + TransactionCount, SuccessfulTransactions, and ResponsivenessMean): + + Application Count Successful ResponsivenessMean + HTTP 4 3 12 sec. + SAP/R3 1 1 17 sec. + FTP 1 1 212 Kbps. + RealVideo 1 1 100.0% + + There are four different types of aggregation. + + The flows(1) aggregation is the simplest. All transactions that + share common application/server/client 3-tuples are aggregated + together, resulting in a set of metrics for all such unique 3- + tuples. + + The clients(2) aggregation results in somewhat more aggregation + (i.e., fewer resulting records). All transactions that share + common application/client tuples are aggregated together, + resulting in a set of metrics for all such unique tuples. + + + + + +Waldbusser Standards Track [Page 5] + +RFC 3729 APM MIB March 2004 + + + The servers(3) aggregation usually results in still more + aggregation (i.e., fewer resulting records). All transactions + that share common application/server tuples are aggregated + together, resulting in a set of metrics for all such unique + tuples. + + The applications(4) aggregation results in the most aggregation + (i.e., the fewest resulting records). All transactions that share + a common application are aggregated together, resulting in a set + of metrics for all such unique applications. + + For example, if in a 5 minute period the following transactions + occurred: + + Actual Transactions: + # App Client Server Successful Responsiveness + 1 HTTP Jim CallCtr N - + 2 HTTP Jim HR Y 12 sec. + 3 HTTP Jim Sales Y 7 sec. + 4 HTTP Jim CallCtr Y 5 sec. + 5 Email Jim Pop3 Y 12 sec. + 6 HTTP Jane CallCtr Y 3 sec. + 7 SAP/R3 Jane Finance Y 19 sec. + 8 Email Jane Pop3 Y 16 sec. + 9 HTTP Joe HR Y 18 sec. + + The flows(1) aggregation results in the following table. Note that + the first record (HTTP/Jim/CallCtr) is the aggregation of + transactions #1 and #4: + +Flow Aggregation: +App Client Server Count Succe- Rsp Rsp Rsp RspB1 RspB2 + ssful Mean Min Max +HTTP Jim CallCtr 2 1 5 5 5 1 0 +HTTP Jim HR 1 1 12 12 12 0 1 +HTTP Jim Sales 1 1 7 7 7 1 0 +Email Jim Pop3 1 1 12 12 12 0 1 +HTTP Jane CallCtr 1 1 3 3 3 1 0 +SAP/R3 Jane Finance 1 1 19 19 19 0 1 +Email Jane Pop3 1 1 16 16 16 0 1 +HTTP Joe HR 1 1 18 18 18 0 1 + + (Note: Columns above such as RspMean and RspB1 are abbreviations for + objects in the apmReportTable) + + The clients(2) aggregation results in the following table. Note that + the first record (HTTP/Jim) is the aggregate of transactions #1, #2, + #3 and #4: + + + +Waldbusser Standards Track [Page 6] + +RFC 3729 APM MIB March 2004 + + + Client Aggregation: + App Client Count Succe- Rsp Rsp Rsp RspB1 RspB2 ... + ssful Mean Min Max + HTTP Jim 4 3 8 5 12 2 1 + Email Jim 1 1 12 12 12 0 1 + HTTP Jane 1 1 3 3 3 1 0 + SAP/R3 Jane 1 1 19 19 19 0 1 + Email Jane 1 1 16 16 16 0 1 + HTTP Joe 1 1 18 18 18 0 1 + + The servers(3) aggregation results in the following table. Note that + the first record (HTTP/CallCtr) is the aggregation of transactions + #1, #4 and #6: + + Server Aggregation: + App Server Count Succe- Rsp Rsp Rsp RspB1 RspB2 ... + ssful Mean Min Max + HTTP CallCtr 3 2 4 3 5 2 0 + HTTP HR 2 2 15 12 18 0 2 + HTTP Sales 1 1 7 7 7 1 0 + Email Pop3 2 2 14 12 16 0 2 + SAP/R3 Finance 1 1 19 19 19 0 1 + + The applications(4) aggregation results in the following table. Note + that the first record (HTTP) is the aggregate of transactions #1, #2, + #3, #5, #6 and #9: + + Application Aggregation: + App Count Succe- Rsp Rsp Rsp RspB1 RspB2 ... + ssful Mean Min Max + HTTP 6 5 9 3 18 3 2 + Email 2 2 14 12 16 0 2 + SAP/R3 1 1 19 19 19 0 1 + + The apmReportControlTable provides for a historical set of the last + 'X' reports, combining the historical records found in history tables + with the periodic snapshots found in TopN tables. Conceptually the + components are: + + apmReportControlTable + Specifies data collection and summarization parameters, including + the number of reports to keep and the size of each report. + + apmReport + Each APM Report contains an aggregated list of records that + represent data collected during a specific time period. + + + + + +Waldbusser Standards Track [Page 7] + +RFC 3729 APM MIB March 2004 + + + An apmReportControlEntry causes a family of APM Reports to be + created, where each report summarizes different, successive, + contiguous periods of time. + + While the conceptual model of APM Reports shows them as distinct + entities, they are all entries in a single apmReportTable, where + entries in report 'A' are separated from entries in report 'B' by + different values of the apmReportIndex. + + +-----------------------+ + | | + | apmReportControlTable | + | | +-----------+ + +-----------------------+ | | + +-----------+ | + | | | + +-----------+ |---+ + | | | + +----------+ |---+ + | | | apmReport + |apmReport |----+ +-----------------------+ + | | |Thu Mar 30 12-1PM | + +----------+ | | + |CLNT SERV PROT stats | + | | + |Joe News HTTP data | + |Jan POP POP3 data | + |Jan POP SMTP data | + |Bob HR PSOFT data | + |... | + |... | + +-----------------------+ + +2.2. AppLocalIndex Linkages + + The following set of example tables illustrates a few points: + + 1. How protocolDirEntries, apmHttpFilterEntries and + apmUserDefinedAppEntries(not shown) all result in entries in the + apmAppDirTable. + + 2. How a single appLocalIndex may be represented multiple times in + the apmAppDirTable and apmReportTable if the agent measures + multiple responsiveness types for that application. + + A convention in the formatting of these tables is that the columns to + the left of the '|' separator are index columns for the table. + + + + +Waldbusser Standards Track [Page 8] + +RFC 3729 APM MIB March 2004 + + + Assuming the following entries in the RMON2 protocolDirectory: + + protocolDirectory + ID (*) Parameters | LocalIndex ... + WWW None | 1 + WWW Get None | 2 + SAP/R3 None | 3 + + (*) These IDs are represented here symbolically. Consult [5] for + more detail in their format + + and the following entry in the apmHttpFilterTable: + + ApmHttpFilterTable + Index | AppLocalIndex ServerAddress URLPath MatchType ... + 5 | 20 hr.example.com /expense prefix(3) ... + + the apmAppDirTable would be populated with the following + entries: + + apmAppDir + AppLocalIndex ResponsivenessType | Config ... + 1 transaction(1) | On ... + 1 throughput(2) | On ... + 2 transaction(1) | On ... + 2 throughput(2) | On ... + 3 transaction(1) | On ... + 20 transaction(1) | On ... + 20 throughput(2) | On ... + + The entries in the apmAppDirTable with an appLocalIndex of 1, 2 and 3 + correspond to the identically named entries in the protocolDirectory + table. appLocalIndex #1 results in 2 entries, one to measure the + transaction responsiveness of WWW and one to measure its throughput + responsiveness. In contrast, appLocalIndex #3 results in only a + transaction entry because the agent does not measure the throughput + responsiveness for SAP/R3 (probably because it isn't very + meaningful). Finally, appLocalIndex #20 corresponds to the entry in + the apmHttpFilterTable and has transaction responsiveness and + throughput responsiveness measurements available. + + If a report was configured using application aggregation, entries in + that report might look like: + + + + + + + + +Waldbusser Standards Track [Page 9] + +RFC 3729 APM MIB March 2004 + + + apmReportTable + CtlIndex Index AppLocalIdx ResponsivenessType | TransactionCount ... + 1 1 1 transaction(1) | counters... + 1 1 1 throughput(2) | counters... + 1 1 2 transaction(1) | counters... + 1 1 2 throughput(2) | counters... + 1 1 3 transaction(1) | counters... + 1 1 20 transaction(1) | counters... + 1 1 20 throughput(2) | counters... + + Note that the index items protocolDirLocalIndex, + apmReportServerAddress and apmReportClientID were omitted from + apmReportTable example for brevity because they would have been equal + to zero due to the use of the application aggregation in this + example. + +2.3. Measurement Methodology + + There are many different measurement methodologies available for + measuring application performance (e.g., probe-based, client-based, + synthetic-transaction, etc.). This specification does not mandate a + particular methodology - it is open to any that meet the minimum + requirements. Conformance to this specification requires that the + collected data match the semantics described herein. In particular, + a data collection methodology must be able to measure response time, + throughput, streaming responsiveness and availability as specified. + + Note that in some cases a transaction may run for a long time but + ultimately be successful. The measurement software shouldn't + prematurely classify lengthy transactions as failures but should wait + as long as the client application will wait for a successful + response. + +2.4. Instrumentation Architectures + + Different architectural approaches and deployment strategies may be + taken towards implementation of this specification. If a highly + distributed approach is desired (e.g., an agent per desktop), one or + both of the two approaches below may be used to make it more + practical. + +2.4.1. Application Directory Caching + + It is necessary for the manager to have a copy of the tables that + define the Application Directory in order to interpret APM + measurements. It is likely that in a highly distributed network of + + + + + +Waldbusser Standards Track [Page 10] + +RFC 3729 APM MIB March 2004 + + + thousands of APM agents, this Application Directory will be the same + on many, if not all of the agents. Repeated downloads of the + Application Directory may be inefficient. + + The apmAppDirID object is a single object that identifies the + configuration of all aspects of the Application Directory when it is + equal to a well-known, registered configuration. Thus, when a + manager sees an apmAppDirID value that it recognizes, it need not + download the Application Directory from that agent. In fact, the + manager may discover a new registered Application Directory + configuration on one agent and then re-use that configuration on + another agent that shares the same apmAppDirID value. + + Application directory registrations are unique within an + administrative domain, allowing an administrator to create a custom + application directory configuration without the need to assign it a + globally-unique registration. + +2.4.2. Push Model + + When APM agents are installed on "desktops" (including laptops), a + few issues make polling difficult: + + 1. Desktops often have dynamically-assigned addresses so there is no + long-lived address to poll. + + 2. Desktops are not available as much as infrastructure components + due to crashes, user-initiated reboots and shutdowns and user + control over monitoring software. Thus a desktop may not be + available to answer a poll at the moment when the manager is + scheduled to poll that desktop. + + 3. Laptops that are connected via dialup connections are only + sporadically connected and will routinely be unreachable when the + manager is scheduled to poll. + + As a consequence, a push model is usually more appropriate for + desktop-based agents. To achieve this, the agent should follow the + following rules in deciding what data to send in notifications. + + + + + + + + + + + + +Waldbusser Standards Track [Page 11] + +RFC 3729 APM MIB March 2004 + + + APM Reports + If an agent wishes to push APM reports to a manager, it + must send: + apmAppDirID + apmNameTable (any data updated since the last push) + For each report the agent wishes to upload, it must + send the entire apmReportControlEntry associated with + that report and the associated entries in the + apmReportTable that have changed since the last report. + + APM Transactions + If an agent wishes to push APM transactions to + a manager, it must send: + apmAppDirID + apmNameTable (any data updated since the last push) + apmTransactionTable (relevant entries) + + APM Exceptions + The agent must send: + apmAppDirID + apmNameTable (any data updated since the last push) + apmTransactionEntry (of exception transaction) + apmExceptionEntry (entry that generated exception) + [Note that this list supersedes the information in the + OBJECTS clauses of the apmTransactionResponsivenessAlarm + and apmTransactionUnsuccessfulAlarm when the agent is + using a push model. This additional information + eliminates the need for the manager to request additional + data to understand the exception.] + + The order of varbinds and where to segment varbinds into PDUs is at + the discretion of the agent. + +2.5. Structure of this MIB Module + + The objects are arranged into the following groups: + + - APM Application Directory Group + + - APM User Defined Applications Group + + - APM Report Group + + - APM Transaction Group + + - APM Exception Group + + - APM Notification Group + + + +Waldbusser Standards Track [Page 12] + +RFC 3729 APM MIB March 2004 + + + These groups are the basic unit of conformance. If an agent + implements a group, then it must implement all objects in that group. + While this section provides an overview of grouping and conformance + information for this MIB Module, the authoritative reference for such + information is contained in the MODULE-COMPLIANCE and OBJECT-GROUP + macros later in this MIB Module. + + These groups are defined to provide a means of assigning object + identifiers, and to provide a method for implementors of managed + agents to know which objects they must implement. + +2.5.1. The APM Application Directory Group + + The APM Application Directory group contains configuration objects + for every application or application verb monitored on this system. + This group consists of the apmAppDirTable. + +2.5.2. The APM User Defined Applications Group + + The APM User Defined Applications Group contains objects that allow + for the tracking of applications or application verbs that aren't + registered in the protocolDirTable. This group consists of the + apmHttpFilterTable and the apmUserDefinedAppTable. + +2.5.3. The APM Report Group + + The APM Report Group is used to prepare regular reports that + aggregate application performance by flow, by client, by server, or + by application. This group consists of the apmReportControlTable and + the apmReportTable. + +2.5.4. The APM Transaction Group + + The APM Transaction Group is used to show transactions that are + currently in progress and ones that have ended recently, along with + their responsiveness metric. + + Because many transactions last a very short time and because an agent + may not retain completed transactions very long, transactions may + exist in this table for a very short time. Thus, polling this table + isn't an effective mechanism for retrieving all transactions unless + the value of apmTransactionsHistorySize is suitably large for the + transactions being monitored. + + One important benefit of this table is that it allows a management + station to check on the status of long-lived transactions. Because + the apmReport and apmException mechanisms act only on transactions + that have finished, a network manager may not have visibility for + + + +Waldbusser Standards Track [Page 13] + +RFC 3729 APM MIB March 2004 + + + some time into the performance of long-lived transactions such as + streaming applications, large data transfers, or (very) poorly + performing transactions. In fact, by their very definition, the + apmReport and apmException mechanisms only provide visibility into a + problem after nothing can be done about it. This group consists + primarily of the apmTransactionTable. + +2.5.5. The APM Exception Group + + The APM Exception Group is used to generate immediate notifications + of transactions that cross certain thresholds. The apmExceptionTable + is used to configure which thresholds are to be checked for which + types of transactions. The apmTransactionResponsivenessAlarm + notification is sent when a transaction occurs with a responsiveness + that crosses a threshold. The apmTransactionUnsuccessfulAlarm + notification is sent when a transaction fails for which exception + checking was configured. This group consists primarily of the + apmExceptionTable. + +2.5.6. The APM Notification Group + + The APM Notification Group contains 2 notifications that are sent + when thresholds in the APM Exception Table are exceeded. + +3. Definitions + +APM-MIB DEFINITIONS ::= BEGIN +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, + Counter32, Unsigned32 FROM SNMPv2-SMI + TEXTUAL-CONVENTION, RowStatus, TimeStamp, + TimeInterval, TruthValue, DateAndTime, + StorageType FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP FROM SNMPv2-CONF + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + rmon, OwnerString FROM RMON-MIB + protocolDirLocalIndex FROM RMON2-MIB; + +-- Application Performance Measurement MIB + +apm MODULE-IDENTITY + LAST-UPDATED "200402190000Z" -- February 19, 2004 + ORGANIZATION "IETF RMON MIB Working Group" + CONTACT-INFO + "Author: + Steve Waldbusser + + + +Waldbusser Standards Track [Page 14] + +RFC 3729 APM MIB March 2004 + + + Phone: +1-650-948-6500 + Fax : +1-650-745-0671 + Email: waldbusser@nextbeacon.com + + Working Group Chair: + Andy Bierman + Cisco Systems, Inc. + Postal: 170 West Tasman Drive + San Jose, CA USA 95134 + Tel: +1 408 527-3711 + E-mail: abierman@cisco.com + + Working Group Mailing List: + To subscribe send email to: + " + DESCRIPTION + "The MIB module for measuring application performance + as experienced by end-users. + + Copyright (C) The Internet Society (2004). This version of + this MIB module is part of RFC 3729; see the RFC itself for + full legal notices." + + REVISION "200402190000Z" -- February 19, 2004 + DESCRIPTION + "The original version of this MIB Module, published as + RFC3729." + + ::= { rmon 23 } + +apmMibObjects OBJECT IDENTIFIER ::= { apm 1 } +apmConformance OBJECT IDENTIFIER ::= { apm 2 } +apmCompliances OBJECT IDENTIFIER ::= { apmConformance 1 } +apmGroups OBJECT IDENTIFIER ::= { apmConformance 2 } + + +AppLocalIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A locally arbitrary unique identifier associated with an + application or application verb. + + All objects of type AppLocalIndex are assigned by the agent + out of a common number space. In other words, AppLocalIndex + values assigned to entries in one table must not overlap with + AppLocalIndex values assigned to entries in another + table. Further, every protocolDirLocalIndex value registered + by the agent automatically assigns the same value out of the + + + +Waldbusser Standards Track [Page 15] + +RFC 3729 APM MIB March 2004 + + + AppLocalIndex number space. + + For example, if the protocolDirLocalIndex values { 1, 3, 5, 7 } + have been assigned, and the apmHttpFilterAppLocalIndex values + { 6, 8, 9 } have been assigned: + + - Assignment of new AppLocalIndex values must not use the + values { 1, 3, 5, 6, 7, 8, 9 }. + - AppLocalIndex values { 1, 3, 5, 7 } are automatically + assigned and are associated with the identical value of + protocolDirLocalIndex. In particular, an entry in the + apmAppDirTable indexed by a value provides further + information about a protocol indexed by the same value + in the protocolDirTable of RMON2. + + The value for each supported application must remain constant + at least from one re-initialization of the entity's network + management system to the next re-initialization, except that + if an application is deleted and re-created, it must be + re-created with a new value that has not been used since the + last re-initialization. + + The specific value is meaningful only within a given SNMP + entity. An AppLocalIndex value must not be re-used until the + next agent restart." + SYNTAX Unsigned32 (1..2147483647) + +ProtocolDirNetworkAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A network level address whose semantics and encoding are + specified by an associated protocolDirLocalIndex + value. Objects of this type must specify which + protocolDirLocalIndex value is used. This value is encoded + according to the encoding rules for the identified + protocolDirectory entry. + + For example, if the associated protocolDirLocalIndex indicates + an encapsulation of ip, this object is encoded as a length + octet of 4, followed by the 4 octets of the ip address, + in network byte order. + + Objects of this type may allow this value to be the zero + length string. If so, they must identify they meaning of this + value." + SYNTAX OCTET STRING (SIZE(0..255)) + +DataSourceOrZero ::= TEXTUAL-CONVENTION + + + +Waldbusser Standards Track [Page 16] + +RFC 3729 APM MIB March 2004 + + + STATUS current + DESCRIPTION + "Identifies the source of the data that the associated + function is configured to analyze. This source can be any + interface on this device. + + In order to identify a particular interface, this + object shall identify the instance of the ifIndex + object, defined in [4], for the desired interface. + + For example, if an entry were to receive data from + interface #1, this object would be set to ifIndex.1. + + If the source of the data isn't an interface or cannot be + localized to an interface, this object would be set to 0.0" + + REFERENCE "The DataSource textual convention is defined in + RFC 2021 [5]." + SYNTAX OBJECT IDENTIFIER + +RmonClientID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A long-lived unique ID assigned to an end-system. This ID is + assigned by the agent using an implementation-specific + algorithm. + + Because a client machine may be assigned multiple addresses + over any time period it can be difficult to attribute + behavior to a particular client based solely on its + address. A ClientID may be assigned to provide a more + stable handle for referencing that client. The entity that + assigns the ClientID may use various implementation + techniques to keep track of a client but if the assigning + entity is unable to track client address mappings, it may map + client identifiers to client addresses rather than to + distinct client machines. + + This is named ClientID because it helps to solve a problem + seen in network clients (servers usually have well-known, + long-lived addresses). However, ClientID's may be assigned to + any end-system regardless of its role on the network." + SYNTAX Unsigned32 (0..4294967295) + + +TransactionAggregationType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + + + +Waldbusser Standards Track [Page 17] + +RFC 3729 APM MIB March 2004 + + + "Specifies one of 4 different techniques for aggregating + transactions. + + The metrics for a single transaction are the responsiveness of + the transaction and whether the transaction succeeded (a + boolean). When such metrics are aggregated in this MIB Module, + these metrics are replaced by averages and distributions of + responsiveness and availability. The metrics describing + aggregates are constant no matter which type of aggregation is + being performed. These metrics may be found in the + apmReportTable. + + The flows(1) aggregation is the simplest. All transactions + that share common application/server/client 3-tuples are + aggregated together, resulting in a set of metrics for all + such unique 3-tuples. + + The clients(2) aggregation results in somewhat more + aggregation (i.e., fewer resulting records). All transactions + that share common application/client tuples are aggregated + together, resulting in a set of metrics for all such unique + tuples. + + The servers(3) aggregation usually results in still more + aggregation (i.e., fewer resulting records). All transactions + that share common application/server tuples are aggregated + together, resulting in a set of metrics for all such unique + tuples. + + The applications(4) aggregation results in the most + aggregation (i.e., the fewest resulting records). All + transactions that share a common application are aggregated + together, resulting in a set of metrics for all such unique + applications. + + Note that it is not meaningful to aggregate applications, as + different applications have widely varying characteristics. As a + result, this set of aggregations is complete." + SYNTAX INTEGER { + flows(1), -- Least Aggregation + clients(2), + servers(3), + applications(4) -- Most Aggregation + } + +-- The APM Application Directory Group + +-- The Application Directory Table contains a record for every + + + +Waldbusser Standards Track [Page 18] + +RFC 3729 APM MIB March 2004 + + +-- application monitored by this agent. This table is also used to +-- configure whether or not an application will be measured and which +-- bucket boundaries will be used for the application. +-- +-- The bucket boundaries define the break-points between bins of a +-- histogram analysis for that application. As an example of how this +-- works, consider an entry representing response-time for http. +-- If the boundaries are set as follows: +-- Boundary1: 500 milliseconds +-- Boundary2: 1 second +-- Boundary3: 2 seconds +-- Boundary4: 5 +-- Boundary5: 15 +-- Boundary6: 60 +-- +-- If the following measurements are made (all in milliseconds): +-- 377, 8645, 1300, 487, 1405, 775, 1115, 850, 945, 1054, 7745, 9380 +-- +-- A report run during this interval would report the following +-- counts: +-- Bucket1: 2 +-- Bucket2: 3 +-- Bucket3: 4 +-- Bucket4: 0 +-- Bucket5: 3 +-- Bucket6: 0 +-- Bucket7: 0 + +apmAppDirTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApmAppDirEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The APM MIB directory of applications and application + verbs. The agent will populate this table with all + applications/verbs of any responsivenessType it has the + capability to monitor. Since the agent populates this table + with every entry it has the capability to monitor, the + entries in this table are read-write, allowing the management + station to modify parameters in this table but not to add new + entries or delete entries (however, entries may be + disabled). If new entries are added to the apmHttpFilterTable + or the apmUserDefinedAppTable, the agent will add the + corresponding entries to this table. + + It is an implementation-dependent matter as to how the agent + sets these default parameters. For example, it may leave + certain entries in this table 'off(0)' if the agent developer + + + +Waldbusser Standards Track [Page 19] + +RFC 3729 APM MIB March 2004 + + + believes that combination will be infrequently used, allowing + a manager that needs that capability to set it to 'on(1)'. + + Some applications are registered in the RMON2 protocol + directory and some are registered in other tables in this + MIB Module. Regardless of where an application is originally + registered, it is assigned an AppLocalIndex value that is the + primary index for this table. + + The contents of this table affect all reports and exceptions + generated by this agent. Accordingly, modification of this + table should be performed by a manager acting in the role of + administrator. In particular, management software should not + require or enforce particular configuration of this table - it + should reflect the preferences of the site administrator, not + the software author. As a practical matter, this requires + management software to allow the administrator to configure + the values it will use so that it can be adapted to the site + policy." + ::= { apmMibObjects 1 } + +apmAppDirEntry OBJECT-TYPE + SYNTAX ApmAppDirEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The APM MIB directory of applications and application + verbs. An entry will exist in this table for all applications + for which application performance measurement is supported." + INDEX { apmAppDirAppLocalIndex, + apmAppDirResponsivenessType } + ::= { apmAppDirTable 1 } + +ApmAppDirEntry ::= SEQUENCE { + apmAppDirAppLocalIndex AppLocalIndex, + apmAppDirResponsivenessType INTEGER, + apmAppDirConfig INTEGER, + apmAppDirResponsivenessBoundary1 Unsigned32, + apmAppDirResponsivenessBoundary2 Unsigned32, + apmAppDirResponsivenessBoundary3 Unsigned32, + apmAppDirResponsivenessBoundary4 Unsigned32, + apmAppDirResponsivenessBoundary5 Unsigned32, + apmAppDirResponsivenessBoundary6 Unsigned32 +} + +apmAppDirAppLocalIndex OBJECT-TYPE + SYNTAX AppLocalIndex + MAX-ACCESS not-accessible + + + +Waldbusser Standards Track [Page 20] + +RFC 3729 APM MIB March 2004 + + + STATUS current + DESCRIPTION + "The AppLocalIndex assigned for this application Directory + entry." + ::= { apmAppDirEntry 1 } + +apmAppDirResponsivenessType OBJECT-TYPE + SYNTAX INTEGER { + transactionOriented(1), + throughputOriented(2), + streamingOriented(3) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object describes and configures the agent's support for + application performance measurement for this application. + There are 3 types of measurements for different types of + applications: + + Transaction-Oriented applications have a fairly constant + workload to perform for all transactions. The responsiveness + metric for transaction-oriented applications is application + response time (from first request to final delivery of + service) and is measured in milliseconds. This is + commonly referred to as end-user response time. + + Throughput-Oriented applications have widely varying workloads + based on the nature of the client request. In particular, + throughput-oriented applications vary widely in the amount of + data that must be transported to satisfy the request. The + responsiveness metric for throughput-oriented applications is + kilobits per second. + + Streaming-Oriented applications deliver data at a constant + metered rate of speed regardless of the responsiveness of the + networking and computing infrastructure. This constant rate of + speed is generally specified to be below (sometimes well + below) the nominal capability of the infrastructure. However, + when the infrastructures cannot deliver data at this speed, + interruption of service or degradation of service can + result. The responsiveness metric for streaming-oriented + applications is the ratio of time that the service is degraded + or interrupted to the total service time. This metric is + measured in parts per million. + + Note that for some applications, measuring more than one + responsiveness type may be interesting. For agents that wish + + + +Waldbusser Standards Track [Page 21] + +RFC 3729 APM MIB March 2004 + + + to support more than one measurement for a application, they + will populate this table with multiple entries for that + application, one for each type." + ::= { apmAppDirEntry 2 } + +apmAppDirConfig OBJECT-TYPE + SYNTAX INTEGER { + off(1), + on(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object describes and configures support for application + performance measurement for this application. + + If the value of this object is on(2), the agent supports + measurement of application performance metrics for this + application and is configured to measure such metrics for all + APM MIB functions and all interfaces. If the value of this + object is off(1), the agent supports measurement of + application performance for this application but is configured + to not measure these metrics for any APM MIB functions or + interfaces. Whenever this value changes from on(2) to off(1), + the agent shall delete all related entries in all tables in + this MIB Module. + + The value of this object must persist across reboots." + ::= { apmAppDirEntry 3 } + +apmAppDirResponsivenessBoundary1 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The boundary value between bucket1 and bucket 2. If this + value is modified, all entries in the apmReportTable must be + deleted by the agent. + + The value of this object must persist across reboots." + ::= { apmAppDirEntry 4 } + +apmAppDirResponsivenessBoundary2 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The boundary value between bucket2 and bucket 3. If this + + + +Waldbusser Standards Track [Page 22] + +RFC 3729 APM MIB March 2004 + + + value is modified, all entries in the apmReportTable must be + deleted by the agent. + + The value of this object must persist across reboots." + ::= { apmAppDirEntry 5 } + +apmAppDirResponsivenessBoundary3 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The boundary value between bucket3 and bucket 4. If this + value is modified, all entries in the apmReportTable must be + deleted by the agent. + + The value of this object must persist across reboots." + ::= { apmAppDirEntry 6 } + +apmAppDirResponsivenessBoundary4 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The boundary value between bucket4 and bucket 5. If this + value is modified, all entries in the apmReportTable must be + deleted by the agent. + + The value of this object must persist across reboots." + ::= { apmAppDirEntry 7 } + +apmAppDirResponsivenessBoundary5 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The boundary value between bucket5 and bucket 6. If this + value is modified, all entries in the apmReportTable must be + deleted by the agent. + + The value of this object must persist across reboots." + ::= { apmAppDirEntry 8 } + +apmAppDirResponsivenessBoundary6 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The boundary value between bucket6 and bucket 7. If this + + + +Waldbusser Standards Track [Page 23] + +RFC 3729 APM MIB March 2004 + + + value is modified, all entries in the apmReportTable must be + deleted by the agent. + + The value of this object must persist across reboots." + ::= { apmAppDirEntry 9 } + +-- Scalars related to the Application Directory table + +apmBucketBoundaryLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime the last time that any bucket boundary + in any appDirEntry was changed. This object can help to + determine if two managers are both trying to enforce different + configurations of this table." + ::= { apmMibObjects 2 } + +apmAppDirID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object allows managers to avoid downloading application + directory information when the directory is set to a known + (usually fixed) configuration. + + If the value of this object isn't 0.0, it signifies + that the entire contents of the apmAppDirTable, + apmHttpFilterTable, apmUserDefinedAppTable and + protocolDirTable are equal to a known state identified + by the value of this object. If a manager recognizes this + value as identifying a directory configuration it has a local + copy of, it may use this local copy rather than downloading + these tables. Note that it may have downloaded this local copy + (and the ID) from another agent and used this copy for all + other agents that advertised the same ID. + + If an agent recognizes that the entire contents of the + apmAppDirTable, apmHttpFilterTable, + apmUserDefinedAppTable and protocolDirTable are equal to + a known state to which an ID has been assigned, it should set + this object to that ID. + + In many cases when this feature is used, the application + directory information will be in read-only memory and thus the + tables may not be modified via SNMP requests. In the event + + + +Waldbusser Standards Track [Page 24] + +RFC 3729 APM MIB March 2004 + + + that the tables are writable and a modification is made, the + agent is responsible for setting this object to 0.0 if it + cannot determine that the state is equal to a known state. + + An agent is not obligated to recognize and advertise all such + registered states as it may not have knowledge of all states. + Thus, a manager may encounter agents whose DirectoryID value + is 0.0 even though the contents of the directory were equal to + a registered state. + + Note that the contents of those tables includes the + protocolDirLocalIndex and appLocalIndex values. In other + words, these values can't be assigned randomly on each agent, + but must be equal to values that are part of the known + state. While it is possible for a manager to download + application directory details using SNMP and to set the + appropriate directoryID, the manager would need to have some + scheme to ensure consistent values of LocalIndex variables + from agent to agent. Such schemes are outside the scope of + this specification. + + Application directory registrations are unique within an + administrative domain. + + Typically these registrations will be made by an agent + software developer who will set the application directory + tables to a read-only state and assign a DirectoryID to that + state. Thus, all agents running this software would share the + same DirectoryID. As the application directory might change + from one software release to the next, the developer may + register different DirectoryID's for each software release. + + A customer could also create a site-wide application directory + configuration and assign a DirectoryID to that configuration + as long as consistent values of LocalIndex variables can be + ensured. + + The value of this object must persist across reboots." + ::= { apmMibObjects 3 } + +-- APM HTTP Filter Table + +-- The HTTP Filter Table creates virtual applications which measure the +-- performance of certain web pages or sets of web pages. Some +-- circumstances where this is particularly useful are: +-- +-- - An Intranet or ASP scenario where a business application is +-- running on one or more web pages or scripts. + + + +Waldbusser Standards Track [Page 25] + +RFC 3729 APM MIB March 2004 + + +-- (i.e., /expense/submit.cgi?employeeID=3426&...) +-- - A web-hosting scenario where one wants to measure the +-- service level for a particular customer +-- - An e-commerce scenario where the performance of certain +-- pages needs to be monitored more closely. +-- (i.e., shopping cart, shipping, credit card authorization) + +apmHttpFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApmHttpFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that creates virtual applications which measure the + performance of certain web pages or sets of web pages. + + When an entry is added to this table, the agent will + automatically create one or more entries in the + apmAppDirTable (one for each responsivenessType it is + capable of measuring). + + Note that when entries exist in this table some HTTP + transactions will be summarized twice: in applications + represented here as well as the HTTP application. If entries + in this table overlap, these transactions may be summarized + additional times. + + The contents of this table affect all reports and exceptions + generated by this agent. Accordingly, modification of this + table should be performed by a manager acting in the role of + administrator. In particular, management software should not + require or enforce particular configuration of this table - it + should reflect the preferences of the site administrator, not + the software author." + ::= { apmMibObjects 4 } + +apmHttpFilterEntry OBJECT-TYPE + SYNTAX ApmHttpFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A virtual application which measure the performance of certain + web pages or sets of web pages." + INDEX { apmHttpFilterIndex } + ::= { apmHttpFilterTable 1 } + +ApmHttpFilterEntry ::= SEQUENCE { + apmHttpFilterIndex Unsigned32, + apmHttpFilterAppLocalIndex AppLocalIndex, + + + +Waldbusser Standards Track [Page 26] + +RFC 3729 APM MIB March 2004 + + + apmHttpFilterServerProtocol Unsigned32, + apmHttpFilterServerAddress ProtocolDirNetworkAddress, + apmHttpFilterURLPath OCTET STRING, + apmHttpFilterMatchType INTEGER, + apmHttpFilterOwner OwnerString, + apmHttpFilterStorageType StorageType, + apmHttpFilterRowStatus RowStatus +} + +apmHttpFilterIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + apmHttpFilterTable." + ::= { apmHttpFilterEntry 1 } + +apmHttpFilterAppLocalIndex OBJECT-TYPE + SYNTAX AppLocalIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The AppLocalIndex that represents HTTP transactions + that match this entry. + + This object is read-only. A value is created by the agent from + an unused AppLocalIndex value when this apmHttpFilterEntry is + created." + ::= { apmHttpFilterEntry 2 } + +apmHttpFilterServerProtocol OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The protocolDirLocalIndex value of the network level protocol + of the apmHttpFilterServerAddress." + ::= { apmHttpFilterEntry 3 } + +apmHttpFilterServerAddress OBJECT-TYPE + SYNTAX ProtocolDirNetworkAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This entry will only represent transactions coming from the + network address specified in this object. + + + + +Waldbusser Standards Track [Page 27] + +RFC 3729 APM MIB March 2004 + + + This is represented as an octet string with + specific semantics and length as identified + by the associated apmHttpFilterServerProtocol object. + + If this object is the zero-length string, then this entry will + match one of the addresses represented by the 'host' component + of the associated apmHttpFilterURLPath object, where the + format if a URL [9] is + http://:/?." + ::= { apmHttpFilterEntry 4 } + +apmHttpFilterURLPath OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..65535)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This entry will only represent HTTP transactions + where the URL path component in the request matches this + value. This value represents the requested path regardless of + any substitution that the server might perform. + + Prior to the matching, the URL is stripped of any server + address or DNS name and consists solely of the path name on + that server. + + If the length of this object is zero, then this entry will + match if the associated apmHttpFilterServerAddress match. If + the length of that object is also zero, then this entry will + match nothing. + + The value of the associated apmHttpFilterMatchType dictates + the type of matching that will be attempted." + ::= { apmHttpFilterEntry 5 } + +apmHttpFilterMatchType OBJECT-TYPE + SYNTAX INTEGER { + exact(1), + stripTrailingSlash(2), + prefix(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The matching algorithm used to compare the URL pathname. + + If the value is exact(1), then the pathname component will be + compared with the associated apmHttpFilterURLPath and + will only be associated with this entry if it matches exactly. + + + +Waldbusser Standards Track [Page 28] + +RFC 3729 APM MIB March 2004 + + + If the value is stripTrailingSlash(2), then the pathname + component will be compared with the associated + apmHttpFilterURLPath and will only be associated with this + entry if it matches exactly or if the pathname ends with a '/' + symbol and matches apmHttpFilterURLPath if the '/' symbol is + removed from the pathname. This option exists for those paths + where an optional trailing slash is possible but for which a + prefix match would be too broad. + + If the value is prefix(3), then the pathname component will be + compared with the associated apmHttpFilterURLPath and will + only be associated with this entry if the beginning of the + pathname matches every octet of this value. Octets that extend + beyond the length of this value are ignored." + ::= { apmHttpFilterEntry 6 } + +apmHttpFilterOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is + therefore using the resources assigned to it." + ::= { apmHttpFilterEntry 7 } + +apmHttpFilterStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type of this apmHttpFilterEntry. If the value of + this object is 'permanent', no objects in this row need to be + writable." + ::= { apmHttpFilterEntry 8 } + +apmHttpFilterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this apmHttpFilterEntry. No objects in this row + may be modified while the row's status is 'active'." + ::= { apmHttpFilterEntry 9 } + +apmHttpIgnoreUnregisteredURLs OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + + + +Waldbusser Standards Track [Page 29] + +RFC 3729 APM MIB March 2004 + + + DESCRIPTION + "When true, APM measurements of HTTP transactions will only + measure transactions relating to URLs that match a filter in + the apmHttpFilterTable. Thus, measurements for the HTTP + application will present aggregated statistics for + URL-matching HTTP transactions and measurements for the HTTP + GET application verb will present aggregated statistics for + URL-matching HTTP GET transactions. + + This will be used in environments that wish to monitor only + targeted URLs and to ignore large volumes of internet web + browsing traffic. + + This object affects all APM reports and exceptions generated + by this agent. Accordingly, modification of this object should + be performed by a manager acting in the role of + administrator. In particular, management software should not + require or enforce particular configuration of this object - + it should reflect the preferences of the site administrator, + not the software author. + + The value of this object must persist across reboots." + ::= { apmMibObjects 5 } + +apmHttp4xxIsFailure OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When true, this agent will recognize HTTP errors in the range + of 400 through 499 and will treat them as unavailable + transactions. When false or when this object isn't supported, + they will be treated as successful transactions. + + This object allows such error pages to be tracked at the + possible expense of having user typos treated as poor service + on the part of the web server. + + This object affects all reports and exceptions generated by + this agent. Accordingly, modification of this object should be + performed by a manager acting in the role of administrator. In + particular, management software should not require or enforce + particular configuration of this object - it should reflect + the preferences of the site administrator, not the software + author. + + The value of this object must persist across reboots." + ::= { apmMibObjects 6 } + + + +Waldbusser Standards Track [Page 30] + +RFC 3729 APM MIB March 2004 + + +-- The APM User-Defined Application Table + +-- Many application protocols will never be registered with a +-- standards body (and thus included in a protocol directory standard) +-- because they are custom, in-house or proprietary +-- applications. Nevertheless, implementation strategies exist for +-- monitoring the end-user experience of these applications. +-- +-- This read-only table provides a means for the agent to advertise +-- which user-defined applications it is monitoring and to associate +-- each with an AppLocalIndex value. It is an implementation-dependent +-- matter as to how the agent learns how to monitor these +-- applications. + +apmUserDefinedAppTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApmUserDefinedAppEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that advertises user-defined applications that the + agent is measuring. + + The agent will automatically create one or more entries in the + apmAppDirTable (one for each responsivenessType it is + capable of measuring) for each entry in this table. + + Note that when entries exist in this table some + transactions can be summarized more than once if there is + overlap between applications defined here and applications + defined in the protocol directory or in the httpFilter table." + ::= { apmMibObjects 7 } + +apmUserDefinedAppEntry OBJECT-TYPE + SYNTAX ApmUserDefinedAppEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A user-defined application that the agent is measuring, along + with its AppLocalIndex assignment. + + The apmAppDirAppLocalIndex value in the index identifies + the agent-assigned AppLocalIndex value for this user-defined + application." + INDEX { apmAppDirAppLocalIndex } + ::= { apmUserDefinedAppTable 1 } + +ApmUserDefinedAppEntry ::= SEQUENCE { + apmUserDefinedAppParentIndex Unsigned32, + + + +Waldbusser Standards Track [Page 31] + +RFC 3729 APM MIB March 2004 + + + apmUserDefinedAppApplication SnmpAdminString +} + +apmUserDefinedAppParentIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The protocolDirLocalIndex value of the highest-layer + protocol defined in the protocolDirTable that this + application is a child of." + ::= { apmUserDefinedAppEntry 1 } + +apmUserDefinedAppApplication OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A human readable descriptive tag for this application." + ::= { apmUserDefinedAppEntry 2 } + +-- The APM Name Table + +apmNameTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApmNameEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A client machine may have multiple addresses during a period + of monitoring. The apmNameTable assigns a long-lived + identifier to a client and records what addresses were + assigned to that client for periods of time. Various + implementation techniques exist for tracking this mapping but + if an agent is unable to track client address mappings, it may + map client identifiers to client addresses rather than to + distinct client machines. + + A particular apmNameClientID should be a constant attribute of + a particular client. When available, the agent may also record + the machine name and/or user name which may be valuable for + displaying to humans. The apmNameMachineName and + apmNameUserName are relatively constant, changing only if + these attributes actually change on the client. + + The agent will store a historical log of these entries, aging + out old entries as the log becomes too large. Since this table + contains information vital to the interpretation of other + tables (e.g., the apmReportTable), the agent should ensure that + + + +Waldbusser Standards Track [Page 32] + +RFC 3729 APM MIB March 2004 + + + the log doesn't age out entries that would be referenced by + data in those tables. + + Note that an entry for a clientID is active from its + StartTime until the StartTime of another entry (for the same + clientID) that supersedes it, or 'now' if none supersede + it. Therefore, if a clientID only has a single entry, it is by + definition very new and should never be aged out. No entry for + a clientID should be aged out unless it has been updated by a + new entry for the client (i.e., with an updated address) and + only if the new entry is 'old' enough. + + To determine how old is old enough, compute the maximum value + of Interval * (NumReports + 1) of all entries in the + apmReportControlTable (the '+ 1' is to allow a reasonable + period of time for the report to be downloaded). Then take the + larger of this value and the age in seconds of the oldest + entry in the current transaction table. If an entry for a + clientID is superseded by another entry whose StartTime is + more than this many seconds ago, then the older entry may be + deleted." + ::= { apmMibObjects 8 } + +apmNameEntry OBJECT-TYPE + SYNTAX ApmNameEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the APM name table. An entry exists for each + period of time that a client has been associated with a + particular address. + + The protocolDirLocalIndex value in the index identifies + the network layer protocol for the ClientAddress for this + entry. + + Note that some combinations of index values may result in an + index that exceeds 128 sub-identifiers in length which exceeds + the maximum for the SNMP protocol. Implementations should take + care to avoid such combinations." + INDEX { apmNameClientID, + protocolDirLocalIndex, apmNameClientAddress, + apmNameMappingStartTime } + ::= { apmNameTable 1 } + +ApmNameEntry ::= SEQUENCE { + apmNameClientID RmonClientID, + apmNameClientAddress ProtocolDirNetworkAddress, + + + +Waldbusser Standards Track [Page 33] + +RFC 3729 APM MIB March 2004 + + + apmNameMappingStartTime DateAndTime, + apmNameMachineName SnmpAdminString, + apmNameUserName SnmpAdminString +} + +apmNameClientID OBJECT-TYPE + SYNTAX RmonClientID + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique ID assigned to the machine represented by this + mapping. This ID is assigned by the agent using an + implementation-specific algorithm." + ::= { apmNameEntry 1 } + +apmNameClientAddress OBJECT-TYPE + SYNTAX ProtocolDirNetworkAddress (SIZE(1..255)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The network client address for this client when this mapping + was active. + + This is represented as an octet string with specific semantics + and length as identified by the protocolDirLocalIndex + component of the index. This object may not be the zero length + string. + + Since this object is an index variable, it is encoded in the + index according to the index encoding rules. For example, if + the protocolDirLocalIndex component of the index indicates an + encapsulation of ip, this object is encoded as a length octet + of 4, followed by the 4 octets of the ip address, in network + byte order. Care should be taken to avoid values of this + object that, in conjunction with the other index variables, + would result in an index longer than SNMP's maximum of 128 + subidentifiers." + ::= { apmNameEntry 2 } + +apmNameMappingStartTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The time that the agent first discovered this mapping + as active." + ::= { apmNameEntry 3 } + + + + +Waldbusser Standards Track [Page 34] + +RFC 3729 APM MIB March 2004 + + +apmNameMachineName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The human readable name of the client machine. + + If the client has no machine name or the agent is + unable to learn the machine name, this object will be + a zero-length string." + ::= { apmNameEntry 4 } + +apmNameUserName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The human readable name of a human user using the client + machine. If more than one user name are available + simultaneously, it is an implementation-dependent matter as to + which is used here. However, if the user name changes, this + object should change to reflect that change. + + Non-human user names like 'root' or 'administrator' aren't + intended as values for this object. If the client has no + recorded user name or the agent is unable to learn a user + name, this object will be a zero-length string." + ::= { apmNameEntry 5 } + +-- The APM Report Group + +apmReportControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApmReportControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Parameters that control the creation of a set of reports that + aggregate application performance." + ::= { apmMibObjects 9 } + +apmReportControlEntry OBJECT-TYPE + SYNTAX ApmReportControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the apmReportControlTable. + + An example of the indexing of this table is + + + +Waldbusser Standards Track [Page 35] + +RFC 3729 APM MIB March 2004 + + + apmReportControlInterval.3" + INDEX { apmReportControlIndex } + ::= { apmReportControlTable 1 } + +ApmReportControlEntry ::= SEQUENCE { + apmReportControlIndex Unsigned32, + apmReportControlDataSource DataSourceOrZero, + apmReportControlAggregationType TransactionAggregationType, + apmReportControlInterval Unsigned32, + apmReportControlRequestedSize Unsigned32, + apmReportControlGrantedSize Unsigned32, + apmReportControlRequestedReports Unsigned32, + apmReportControlGrantedReports Unsigned32, + apmReportControlStartTime TimeStamp, + apmReportControlReportNumber Unsigned32, + apmReportControlDeniedInserts Counter32, + apmReportControlDroppedFrames Counter32, + apmReportControlOwner OwnerString, + apmReportControlStorageType StorageType, + apmReportControlStatus RowStatus +} + + +apmReportControlIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + apmReportControlTable. Each such entry defines a unique + report whose results are placed in the apmReportTable on + behalf of this apmReportControlEntry." + ::= { apmReportControlEntry 1 } + +apmReportControlDataSource OBJECT-TYPE + SYNTAX DataSourceOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source of the data for APM Reports generated on + behalf of this apmReportControlEntry. + + If the measurement is being performed by a probe, this should + be set to interface or port where data was received for + analysis. If the measurement isn't being performed by a probe, + this should be set to the primary interface over which the + measurement is being performed. If the measurement isn't being + performed by a probe and there is no primary interface or this + + + +Waldbusser Standards Track [Page 36] + +RFC 3729 APM MIB March 2004 + + + information isn't known, this object should be set to 0.0. + + This object may not be modified if the associated + apmReportControlStatus object is equal to active(1)." + ::= { apmReportControlEntry 2 } + +apmReportControlAggregationType OBJECT-TYPE + SYNTAX TransactionAggregationType + -- INTEGER { + -- flows(1), + -- clients(2), + -- servers(3), + -- applications(4) + -- } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of aggregation being performed for this set of + reports. + + The metrics for a single transaction are the responsiveness of + the transaction and whether the transaction succeeded (a + boolean). When such metrics are aggregated in this MIB Module, + these metrics are replaced by averages and distributions of + responsiveness and availability. The metrics describing + aggregates are constant no matter which type of aggregation is + being performed. These metrics may be found in the + apmReportTable. + + The flows(1) aggregation is the simplest. All transactions + that share common application/server/client 3-tuples are + aggregated together, resulting in a set of metrics for all + such unique 3-tuples. + + The clients(2) aggregation results in somewhat more + aggregation (i.e., fewer resulting records). All transactions + that share common application/client tuples are aggregated + together, resulting in a set of metrics for all such unique + tuples. + + The servers(3) aggregation usually results in still more + aggregation (i.e., fewer resulting records). All transactions + that share common application/server tuples are aggregated + together, resulting in a set of metrics for all such unique + tuples. + + The applications(4) aggregation results in the most + aggregation (i.e., the fewest resulting records). All + + + +Waldbusser Standards Track [Page 37] + +RFC 3729 APM MIB March 2004 + + + transactions that share a common application are aggregated + together, resulting in a set of metrics for all such unique + applications. + + Note that it is not meaningful to aggregate applications, as + different applications have widely varying characteristics. + As a result, this set of aggregations is complete. + + This object may not be modified if the associated + apmReportControlStatus object is equal to active(1)." + ::= { apmReportControlEntry 3 } + +apmReportControlInterval OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The interval in seconds over which data is accumulated before + being aggregated into a report in the apmReportTable. All + reports with the same apmReportControlIndex will be based on + the same interval. This object must be greater than zero. + + Many users desire that these reports be synchronized to within + seconds of the beginning of the hour because the results may + be correlated more meaningfully to business behavior and so + that data from multiple agents is aggregated over the same + time periods. Thus management software may take extra effort + to synchronize reports to the beginning of the hour and to one + another. However, the agent must not allow reports to 'drift' + over time as they will quickly become unsynchronized. In + particular, if there is any fixed processing delay between + reports, the reports should deduct this time from the interval + so that reports don't drift. + + This object may not be modified if the associated + apmReportControlStatus object is equal to active(1)." + DEFVAL { 3600 } + ::= { apmReportControlEntry 4 } + +apmReportControlRequestedSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of entries requested to be allocated for each + report generated on behalf of this entry." + ::= { apmReportControlEntry 5 } + + + +Waldbusser Standards Track [Page 38] + +RFC 3729 APM MIB March 2004 + + +apmReportControlGrantedSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of entries per report the agent has allocated + based on the requested amount in apmReportControlRequestedSize. + Since multiple reports are saved, the total number of entries + allocated will be this number multiplied by the value of + apmReportControlGrantedReports, or 1 if that object doesn't + exist. + + When the associated apmReportControlRequestedSize object is + created or modified, the agent should set this object as + closely to the requested value as is possible for the + particular implementation and available resources. When + considering resources available, the agent must consider its + ability to allocate this many entries for all reports. + + Note that while the actual number of entries stored in the + reports may fluctuate due to changing conditions, the agent + must continue to have storage available to satisfy the full + report size for all reports when necessary. Further, the agent + must not lower this value except as a result of a set to the + associated apmReportControlRequestedSize object." + ::= { apmReportControlEntry 6 } + +apmReportControlRequestedReports OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of saved reports requested to be allocated on + behalf of this entry." + ::= { apmReportControlEntry 7 } + +apmReportControlGrantedReports OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of saved reports the agent has allocated + based on the requested amount in + apmReportControlRequestedReports. Since each report can have + many entries, the total number of entries allocated will be + this number multiplied by the value of + apmReportControlGrantedSize, or 1 if that object doesn't + exist. + + + +Waldbusser Standards Track [Page 39] + +RFC 3729 APM MIB March 2004 + + + When the associated apmReportControlRequestedReports object is + created or modified, the agent should set this object as + closely to the requested value as is possible for the + particular implementation and available resources. When + considering resources available, the agent must consider its + ability to allocate this many reports each with the number of + entries represented by apmReportControlGrantedSize, or 1 if + that object doesn't exist. + + Note that while the storage required for each report may + fluctuate due to changing conditions, the agent must continue + to have storage available to satisfy the full report size for + all reports when necessary. Further, the agent must not lower + this value except as a result of a set to the associated + apmReportControlRequestedSize object." + ::= { apmReportControlEntry 8 } + +apmReportControlStartTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the system began processing the + report in progress. Note that the report in progress is not + available. + + This object may be used by the management station to figure + out the start time for all previous reports saved for this + apmReportControlEntry, as reports are started at fixed + intervals." + ::= { apmReportControlEntry 9 } + +apmReportControlReportNumber OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of the report in progress. When an + apmReportControlEntry is activated, the first report will be + numbered one." + ::= { apmReportControlEntry 10 } + +apmReportControlDeniedInserts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of failed attempts to add an entry to reports for + + + +Waldbusser Standards Track [Page 40] + +RFC 3729 APM MIB March 2004 + + + this apmReportControlEntry because the number of entries + would have exceeded apmReportControlGrantedSize. + + This number is valuable in determining if enough entries have + been allocated for reports in light of fluctuating network + usage. Note that since an entry that is denied will often be + attempted again, this number will not predict the exact number + of additional entries needed, but can be used to understand + the relative magnitude of the problem. + + Also note that there is no ordering specified for the entries + in the report, thus there are no rules for which entries will + be omitted when not enough entries are available. As a + consequence, the agent is not required to delete 'least + valuable' entries first." + ::= { apmReportControlEntry 11 } + +apmReportControlDroppedFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of frames which were received by the agent + and therefore not accounted for in the *StatsDropEvents, but + for which the agent chose not to count for this entry for + whatever reason. Most often, this event occurs when the agent + is out of some resources and decides to shed load from this + collection. + + This count does not include packets that were not counted + because they had MAC-layer errors. + + This counter is only relevant if this apm report is based on + a data source whose collection methodology is based on + analyzing network traffic. + + Note that if the apmReportTables are inactive because no + applications are enabled in the application directory, this + value should be 0. + + Note that, unlike the dropEvents counter, this number is the + exact number of frames dropped." + ::= { apmReportControlEntry 12 } + +apmReportControlOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + + + +Waldbusser Standards Track [Page 41] + +RFC 3729 APM MIB March 2004 + + + DESCRIPTION + "The entity that configured this entry and is + therefore using the resources assigned to it." + ::= { apmReportControlEntry 13 } + +apmReportControlStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type of this apmReportControlEntry. If the value + of this object is 'permanent', no objects in this row need to + be writable." + ::= { apmReportControlEntry 14 } + +apmReportControlStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this apmReportControlEntry. + + An entry may not exist in the active state unless all + objects in the entry have an appropriate value. The only + objects in the entry that may be modified while the entry is + in the active state are apmReportControlRequestedSize and + apmReportControlRequestedReports. + + If this object is not equal to active(1), all + associated entries in the apmReportTable shall be deleted + by the agent." + ::= { apmReportControlEntry 15 } + +-- The APM Report Table + +apmReportTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApmReportEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The data resulting from aggregated APM reports. Consult the + definition of apmReportControlAggregationType for the + definition of the various types of aggregations." + ::= { apmMibObjects 10 } + +apmReportEntry OBJECT-TYPE + SYNTAX ApmReportEntry + MAX-ACCESS not-accessible + + + +Waldbusser Standards Track [Page 42] + +RFC 3729 APM MIB March 2004 + + + STATUS current + DESCRIPTION + "A conceptual row in the apmReportTable. + The apmReportControlIndex value in the index identifies the + apmReportControlEntry on whose behalf this entry was created. + The apmReportIndex value in the index identifies which report + (in the series of reports) this entry is a part of. + The apmAppDirAppLocalIndex value in the index identifies + the common application of the transactions aggregated in this + entry. + The apmAppDirResponsivenessType value in the index + identifies the type of responsiveness metric reported by + this entry and uniquely identifies this entry when more + than one responsiveness metric is measured for a flow. + Entries will only exist in this table for those + combinations of AppLocalIndex and ResponsivenessType + that are configured 'on(1)'. + The protocolDirLocalIndex value in the index identifies + the network layer protocol of the apmReportServerAddress. + When the associated apmReportControlAggregationType value is + equal to applications(4) or clients(2), this + protocolDirLocalIndex value will equal 0. + The apmReportServerAddress value in the index identifies the + network layer address of the server in transactions aggregated + in this entry. + The apmNameClientID value in the index identifies the + client in transactions aggregated in this entry. If the + associated apmReportControlAggregationType is equal to + applications(4) or servers(3), then this protocolDirLocalIndex + value will equal 0. + + An example of the indexing of this entry is + apmReportTransactionCount.3.15.3.1.8.4.192.168.1.2.3232235788 + + Note that some combinations of index values may result in an + index that exceeds 128 sub-identifiers in length which exceeds + the maximum for the SNMP protocol. Implementations should take + care to avoid such combinations." + INDEX { apmReportControlIndex, apmReportIndex, + apmAppDirAppLocalIndex, + apmAppDirResponsivenessType, + protocolDirLocalIndex, apmReportServerAddress, + apmNameClientID } + ::= { apmReportTable 1 } + +ApmReportEntry ::= SEQUENCE { + apmReportIndex Unsigned32, + apmReportServerAddress ProtocolDirNetworkAddress, + + + +Waldbusser Standards Track [Page 43] + +RFC 3729 APM MIB March 2004 + + + apmReportTransactionCount Unsigned32, + apmReportSuccessfulTransactions Unsigned32, + apmReportResponsivenessMean Unsigned32, + apmReportResponsivenessMin Unsigned32, + apmReportResponsivenessMax Unsigned32, + apmReportResponsivenessB1 Unsigned32, + apmReportResponsivenessB2 Unsigned32, + apmReportResponsivenessB3 Unsigned32, + apmReportResponsivenessB4 Unsigned32, + apmReportResponsivenessB5 Unsigned32, + apmReportResponsivenessB6 Unsigned32, + apmReportResponsivenessB7 Unsigned32 +} + +apmReportIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of apmReportControlReportNumber for the report to + which this entry belongs." + ::= { apmReportEntry 1 } + +apmReportServerAddress OBJECT-TYPE + SYNTAX ProtocolDirNetworkAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The network server address for this apmReportEntry. + + This is represented as an octet string with + specific semantics and length as identified + by the protocolDirLocalIndex component of the index. + + Since this object is an index variable, it is encoded in the + index according to the index encoding rules. For example, if + the protocolDirLocalIndex indicates an encapsulation of ip, + this object is encoded as a length octet of 4, followed by the + 4 octets of the ip address, in network byte order. Care + should be taken to avoid values of this object that, in + conjunction with the other index variables, would result in an + index longer than SNMP's maximum of 128 subidentifiers. + + If the associated apmReportControlAggregationType is equal to + applications(4) or clients(2), then this object will be a null + string and will be encoded simply as a length octet of 0." + ::= { apmReportEntry 2 } + + + + +Waldbusser Standards Track [Page 44] + +RFC 3729 APM MIB March 2004 + + +apmReportTransactionCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of transactions aggregated into this record." + ::= { apmReportEntry 3 } + +apmReportSuccessfulTransactions OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of successful transactions aggregated into + this record." + ::= { apmReportEntry 4 } + +apmReportResponsivenessMean OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The arithmetic mean of the responsiveness metrics for all + successful transactions aggregated into this record." + ::= { apmReportEntry 5 } + +apmReportResponsivenessMin OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum of the responsiveness metrics for all + successful transactions aggregated into this record." + ::= { apmReportEntry 6 } + +apmReportResponsivenessMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum of the responsiveness metrics for all + successful transactions aggregated into this record." + ::= { apmReportEntry 7 } + +-- Note that when updating a report entry, a transaction will not be +-- counted in more than 1 bucket in an entry. It will be counted in +-- the first bucket that matches, starting with Bucket 1 (B1). Note +-- that if a transaction matches 2 application types, it will update + + + +Waldbusser Standards Track [Page 45] + +RFC 3729 APM MIB March 2004 + + +-- one bucket in each of 2 entries in this table. + +apmReportResponsivenessB1 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of successful transactions aggregated into this + record whose responsiveness was less than boundary1 value for + this application." + ::= { apmReportEntry 8 } + +apmReportResponsivenessB2 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of successful transactions aggregated into this + record whose responsiveness did not fall into Bucket 1 and was + greater than or equal to the boundary1 value for this + application and less than the boundary2 value for this + application." + ::= { apmReportEntry 9 } + +apmReportResponsivenessB3 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of successful transactions aggregated into this + record whose responsiveness did not fall into Bucket 1 or 2 + and as greater than or equal to the boundary2 value for this + application and less than the boundary3 value for this + application." + ::= { apmReportEntry 10 } + +apmReportResponsivenessB4 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of successful transactions aggregated into this + record whose responsiveness did not fall into Buckets 1 + through 3 and was greater than or equal to the boundary3 value + for this application and less than the boundary4 value for + this application." + ::= { apmReportEntry 11 } + + + + +Waldbusser Standards Track [Page 46] + +RFC 3729 APM MIB March 2004 + + +apmReportResponsivenessB5 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of successful transactions aggregated into this + record whose responsiveness did not fall into Buckets 1 + through 4 and was greater than or equal to the boundary4 value + for this application and less than the boundary5 value for + this application." + ::= { apmReportEntry 12 } + +apmReportResponsivenessB6 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of successful transactions aggregated into this + record whose responsiveness did not fall into Buckets 1 + through 5 and was greater than or equal to the + boundary5 value for this application and less than the + boundary6 value for this application." + ::= { apmReportEntry 13 } + +apmReportResponsivenessB7 OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of successful transactions aggregated into this + record whose responsiveness did not fall into Buckets 1 + through 6 and was greater than or equal to the boundary6 value + for this application." + ::= { apmReportEntry 14 } + +-- APM Transaction Table + +apmTransactionTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApmTransactionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains transactions that are currently running + or have recently finished." + ::= { apmMibObjects 11 } + +apmTransactionEntry OBJECT-TYPE + SYNTAX ApmTransactionEntry + + + +Waldbusser Standards Track [Page 47] + +RFC 3729 APM MIB March 2004 + + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the apmTransactionTable. + + The apmAppDirAppLocalIndex value in the index identifies + the application of the transaction represented by this entry. + The apmAppDirResponsivenessType value in the index + identifies the type of responsiveness metric reported by + this entry and uniquely identifies this entry when more + than one responsiveness metric is measured for a flow. + Entries will only exist in this table for those + combinations of AppLocalIndex and ResponsivenessType + that are configured 'on(1)'. + The protocolDirLocalIndex value in the index identifies + the network layer protocol of the apmTransactionServerAddress. + The apmTransactionServerAddress value in the index identifies + the network layer address of the server in the transaction + represented by this entry. + The apmNameClientID value in the index identifies the + client in the transaction represented by this entry. + + An example of the indexing of this entry is + apmTransactionCount.3.1.8.4.192.168.1.2.3232235788.2987 + + Note that some combinations of index values may result in an + index that exceeds 128 sub-identifiers in length which exceeds + the maximum for the SNMP protocol. Implementations should take + care to avoid such combinations." + INDEX { apmAppDirAppLocalIndex, + apmAppDirResponsivenessType, + protocolDirLocalIndex, apmTransactionServerAddress, + apmNameClientID, apmTransactionID } + ::= { apmTransactionTable 1 } + +ApmTransactionEntry ::= SEQUENCE { + apmTransactionServerAddress ProtocolDirNetworkAddress, + apmTransactionID Unsigned32, + apmTransactionResponsiveness Unsigned32, + apmTransactionAge TimeInterval, + apmTransactionSuccess TruthValue +} + +apmTransactionServerAddress OBJECT-TYPE + SYNTAX ProtocolDirNetworkAddress (SIZE (1..255)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + + + +Waldbusser Standards Track [Page 48] + +RFC 3729 APM MIB March 2004 + + + "The network server address for this apmTransactionEntry. + + This is represented as an octet string with specific semantics + and length as identified by the protocolDirLocalIndex + component of the index. This object may not be the zero length + string. + + For example, if the protocolDirLocalIndex indicates an + encapsulation of ip, this object is encoded as a length octet + of 4, followed by the 4 octets of the ip address, in network + byte order. Care should be taken to avoid values of this + object that, in conjunction with the other index variables, + would result in an index longer than SNMP's maximum of 128 + subidentifiers." + ::= { apmTransactionEntry 1 } + +apmTransactionID OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for this transaction amongst other + transactions sharing the same application layer protocol and + server and client addresses. Implementations may choose to use + the value of the client's source port, when possible." + ::= { apmTransactionEntry 2 } + +apmTransactionResponsiveness OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current value of the responsiveness metric for this + transaction. If this transaction has completed, the final + value of the metric will be available. + + Note that this value may change over the lifetime of the + transaction and it is the final value of this metric that is + recorded as the responsiveness of the transaction for use in + other APM MIB functions." + ::= { apmTransactionEntry 3 } + +apmTransactionAge OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If this transaction is still executing, this value shall be + + + +Waldbusser Standards Track [Page 49] + +RFC 3729 APM MIB March 2004 + + + the length of time since it was started. If it has completed, + this value shall be the length of time it was executing." + ::= { apmTransactionEntry 4 } + +apmTransactionSuccess OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The success of this transaction up to this time. Once a + transaction has been marked as failed, it cannot move back + into the successful state." + ::= { apmTransactionEntry 5 } + +apmTransactionsRequestedHistorySize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of completed transactions desired to be + retained in the apmTransactionTable. If the agent doesn't have + enough resources to retain this many, it will retain as many as + possible. Regardless of this value, the agent must attempt to + keep records for all current transactions it is monitoring. + + The value of this object must persist across reboots." + ::= { apmMibObjects 12 } + +-- The APM Exception table +-- The APM Exception Table creates filters so that a management +-- station can get immediate notification of a transaction that has +-- had poor availability or responsiveness. +-- +-- This function is particularly helpful in unaggregated situations +-- where the numbers of agents is relatively high and the transaction +-- rate per agent is relatively low (such as agents for desktops or +-- dedicated to small workgroups). Polling agents in such an +-- environment would either cause scalability problems (high rate) or +-- lead to long notification delays (low rate). + + +apmExceptionTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApmExceptionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table creates filters so that a management station can + get immediate notification of a transaction that has had poor + + + +Waldbusser Standards Track [Page 50] + +RFC 3729 APM MIB March 2004 + + + availability or responsiveness. + + Each apmExceptionEntry is associated with a particular type of + transaction and is applied to all transactions of that + type. Multiple apmExceptionEntries may be associated with a + particular type of transaction. A transaction type is + identified by the value of the apmAppDirAppLocalIndex + component of the index. + + Because the quality of a transaction is not known until it is + completed, these thresholds are only applied after the + transaction has completed." + ::= { apmMibObjects 13 } + +apmExceptionEntry OBJECT-TYPE + SYNTAX ApmExceptionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the apmExceptionTable. + + The apmAppDirAppLocalIndex value in the index identifies + the application this entry will monitor. + The apmAppDirResponsivenessType value in the index + identifies the type of responsiveness metric this entry will + monitor." + + INDEX { apmAppDirAppLocalIndex, + apmAppDirResponsivenessType, apmExceptionIndex } + ::= { apmExceptionTable 1 } + +ApmExceptionEntry ::= SEQUENCE { + apmExceptionIndex Unsigned32, + apmExceptionResponsivenessComparison INTEGER, + apmExceptionResponsivenessThreshold Unsigned32, + apmExceptionUnsuccessfulException INTEGER, + apmExceptionResponsivenessEvents Counter32, + apmExceptionUnsuccessfulEvents Counter32, + apmExceptionOwner OwnerString, + apmExceptionStorageType StorageType, + apmExceptionStatus RowStatus +} + +apmExceptionIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + + + +Waldbusser Standards Track [Page 51] + +RFC 3729 APM MIB March 2004 + + + "An index that uniquely identifies an entry in the + apmExceptionTable amongst other entries with equivalent index + values for apmAppDirAppLocalIndex and + apmAppDirResponsivenessType. Each such entry sets up + thresholds for a particular measurement of a particular + application." + ::= { apmExceptionEntry 1 } + +apmExceptionResponsivenessComparison OBJECT-TYPE + SYNTAX INTEGER { + none(1), + greater(2), + less(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If this value is greater(2) or less(3), the associated + apmExceptionResponsivenessThreshold will be compared to this + value and an exception will be created if the responsiveness + is greater than the threshold (greater(2)) or less than the + threshold (less(3))." + ::= { apmExceptionEntry 2 } + +apmExceptionResponsivenessThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The threshold that responsiveness metrics are compared to." + ::= { apmExceptionEntry 3 } + +apmExceptionUnsuccessfulException OBJECT-TYPE + SYNTAX INTEGER { + off(1), + on(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If this value is on(2), an exception will be created if a + transaction of the associated type is unsuccessful." + ::= { apmExceptionEntry 4 } + +apmExceptionResponsivenessEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + + + +Waldbusser Standards Track [Page 52] + +RFC 3729 APM MIB March 2004 + + + DESCRIPTION + "The total number of responsiveness exceptions generated. This + counter will be incremented even if no notification was sent + due to notifications not being configured or due to exceeding + the apmNotificationMaxRate value." + ::= { apmExceptionEntry 5 } + +apmExceptionUnsuccessfulEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of unsuccessful exceptions generated. This + counter will be incremented even if no notification was sent + due to notifications not being configured or due to exceeding + the apmNotificationMaxRate value." + ::= { apmExceptionEntry 6 } + +apmExceptionOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is + therefore using the resources assigned to it." + ::= { apmExceptionEntry 7 } + +apmExceptionStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type of this apmReportControlEntry. If the value + of this object is 'permanent', no objects in this row need to + be writable." + ::= { apmExceptionEntry 8 } + +apmExceptionStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this apmExceptionEntry. The only objects in the + entry that may be modified while the entry is in the active + state are apmExceptionResponsivenessComparison, + apmExceptionResponsivenessThreshold and + apmExceptionUnsuccessfulException." + ::= { apmExceptionEntry 9 } + + + +Waldbusser Standards Track [Page 53] + +RFC 3729 APM MIB March 2004 + + +apmThroughputExceptionMinTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Because the responsiveness for throughput-oriented + transactions is divided by the elapsed time, it can be very + sensitive to short-term performance variations for + transactions that take a short period of time. For example, + when downloading a very short file, a single dropped packet + could double or triple the total response time. + + Further, throughput is usually examined for applications that + transfer a lot of data, and when doing so it is helpful to + conceptualize transaction costs that are proportional to the + amount of data separately from those costs that are relatively + fixed (i.e., independent of the amount of data). For very + short transactions, these fixed transaction costs (handshake, + setup time, authentication, round-trip time) may dominate the + total response time for the transaction, resulting in + throughput measurements that aren't really proportional to the + network's, server's and client's combined data throughput + capability. + + This object controls the minimum number of seconds that an + throughput-based transaction must exceed before an exception + can be generated for it. If this object is set to zero, then + all throughput-based transactions are candidates for + exceptions. + + The value of this object must persist across reboots." + DEFVAL { 10 } + ::= { apmMibObjects 14 } + +apmNotificationMaxRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of notifications that can be generated + from this agent by the apmExceptionTable in any 60 second + period. + + The value of this object must persist across reboots." + DEFVAL { 1 } + ::= { apmMibObjects 15 } + + + + +Waldbusser Standards Track [Page 54] + +RFC 3729 APM MIB March 2004 + + +-- APM Notifications + +apmNotifications OBJECT IDENTIFIER ::= { apm 0 } + +apmTransactionResponsivenessAlarm NOTIFICATION-TYPE + OBJECTS { apmExceptionResponsivenessThreshold, + apmTransactionResponsiveness } + STATUS current + DESCRIPTION + "Notification sent when a transaction exceeds a threshold + defined in the apmException table. The index of the + included apmExceptionResponsivenessThreshold object identifies + the apmExceptionEntry that specified the threshold. The + apmTransactionResponsiveness variable identifies the actual + transaction and its responsiveness. + + Agent implementors are urged to include additional data + objects in the alarm that may explain the reason for the + alarm. It is helpful to include such data in the alarm because + it describes the situation at the time the alarm was + generated, where polls after the fact may not provide + meaningful information. Examples of such information are CPU + load, memory utilization, network utilization, and transaction + statistics." + ::= { apmNotifications 1 } + +apmTransactionUnsuccessfulAlarm NOTIFICATION-TYPE + OBJECTS { apmExceptionResponsivenessThreshold } + STATUS current + DESCRIPTION + "Notification sent when a transaction is unsuccessful. + The index of the included apmExceptionResponsivenessThreshold + object identifies both the type of the transaction that caused + this notification as well as the apmExceptionEntry that + specified the threshold. + + Agent implementors are urged to include additional data + objects in the alarm that may explain the reason for the + alarm. It is helpful to include such data in the alarm because + it describes the situation at the time the alarm was + generated, where polls after the fact may not provide + meaningful information. Examples of such information are CPU + load, memory utilization, network utilization, and transaction + statistics." + ::= { apmNotifications 2 } + +apmCompliance MODULE-COMPLIANCE + STATUS current + + + +Waldbusser Standards Track [Page 55] + +RFC 3729 APM MIB March 2004 + + + DESCRIPTION + "Describes the requirements for conformance to + the APM MIB" + MODULE -- this module + MANDATORY-GROUPS { apmAppDirGroup, apmReportGroup } + + GROUP apmUserDefinedApplicationsGroup + DESCRIPTION + "Implementation of the apmUserDefinedApplicationsGroup + is optional." + + GROUP apmTransactionGroup + DESCRIPTION + "Implementation of the apmTransactionGroup is optional." + + GROUP apmExceptionGroup + DESCRIPTION + "Implementation of the apmExceptionGroup is optional." + + GROUP apmNotificationGroup + DESCRIPTION + "Implementation of the apmNotificationGroup is optional." + + ::= { apmCompliances 1 } + +apmAppDirGroup OBJECT-GROUP + OBJECTS { apmAppDirConfig, + apmAppDirResponsivenessBoundary1, + apmAppDirResponsivenessBoundary2, + apmAppDirResponsivenessBoundary3, + apmAppDirResponsivenessBoundary4, + apmAppDirResponsivenessBoundary5, + apmAppDirResponsivenessBoundary6, + apmBucketBoundaryLastChange, apmAppDirID, + apmNameMachineName, apmNameUserName } + STATUS current + DESCRIPTION + "The APM MIB directory of applications and application verbs." + ::= { apmGroups 1 } + +apmUserDefinedApplicationsGroup OBJECT-GROUP + OBJECTS { apmHttpFilterAppLocalIndex, + apmHttpFilterServerProtocol, + apmHttpFilterServerAddress, apmHttpFilterURLPath, + apmHttpFilterMatchType, apmHttpFilterOwner, + apmHttpFilterStorageType, apmHttpFilterRowStatus, + apmHttpIgnoreUnregisteredURLs, apmHttp4xxIsFailure, + apmUserDefinedAppParentIndex, + + + +Waldbusser Standards Track [Page 56] + +RFC 3729 APM MIB March 2004 + + + apmUserDefinedAppApplication } + STATUS current + DESCRIPTION + "Objects used for creating and managing user-defined + applications." + ::= { apmGroups 2 } + +apmReportGroup OBJECT-GROUP + OBJECTS { apmReportControlDataSource, + apmReportControlAggregationType, + apmReportControlInterval, + apmReportControlRequestedSize, + apmReportControlGrantedSize, + apmReportControlRequestedReports, + apmReportControlGrantedReports, + apmReportControlStartTime, + apmReportControlReportNumber, + apmReportControlDeniedInserts, + apmReportControlDroppedFrames, + apmReportControlOwner, + apmReportControlStorageType, + apmReportControlStatus, + apmReportTransactionCount, + apmReportSuccessfulTransactions, + apmReportResponsivenessMean, + apmReportResponsivenessMin, + apmReportResponsivenessMax, + apmReportResponsivenessB1, + apmReportResponsivenessB2, + apmReportResponsivenessB3, + apmReportResponsivenessB4, + apmReportResponsivenessB5, + apmReportResponsivenessB6, + apmReportResponsivenessB7 } + STATUS current + DESCRIPTION + "The apm report group controls the creation and retrieval of + reports that aggregate application performance." + ::= { apmGroups 3 } + +apmTransactionGroup OBJECT-GROUP + OBJECTS { apmTransactionResponsiveness, + apmTransactionAge, apmTransactionSuccess, + apmTransactionsRequestedHistorySize } + STATUS current + DESCRIPTION + "The apm transaction group contains statistics for + individual transactions." + + + +Waldbusser Standards Track [Page 57] + +RFC 3729 APM MIB March 2004 + + + ::= { apmGroups 4 } + +apmExceptionGroup OBJECT-GROUP + OBJECTS { apmExceptionResponsivenessComparison, + apmExceptionResponsivenessThreshold, + apmExceptionUnsuccessfulException, + apmExceptionResponsivenessEvents, + apmExceptionUnsuccessfulEvents, + apmExceptionOwner, apmExceptionStorageType, + apmExceptionStatus, apmThroughputExceptionMinTime, + apmNotificationMaxRate } + STATUS current + DESCRIPTION + "The apm exception group causes notifications to be sent + whenever transactions are detected that had poor availability + or responsiveness." + ::= { apmGroups 5 } + +apmNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { apmTransactionResponsivenessAlarm, + apmTransactionUnsuccessfulAlarm } + STATUS current + DESCRIPTION + "Notifications sent by an APM MIB agent." + ::= { apmGroups 6 } + +END + +4. Security Considerations + + There are a number of management objects defined in this MIB module + with a MAX-ACCESS clause of read-write and/or read-create. Such + objects may be considered sensitive or vulnerable in some network + environments. The support for SET operations in a non-secure + environment without proper protection can have a negative effect on + network operations. + + Specifically, most of the read-write and read-create objects in this + MIB module may be used to configure an agent to reveal network + addresses, application usage information and conversation statistics + that may be considered sensitive in some environments. + + Some of the readable objects in this MIB module (i.e., objects with a + MAX-ACCESS other than not-accessible) may be considered sensitive or + vulnerable in some network environments. It is thus important to + control even GET and/or NOTIFY access to these objects and possibly + to even encrypt the values of these objects when sending them over + the network via SNMP. + + + +Waldbusser Standards Track [Page 58] + +RFC 3729 APM MIB March 2004 + + + Specifically, this MIB contains network addresses, machines names, + user names, application usage information, and conversation + statistics. Data of this nature should be considered sensitive and + the privacy of the users from whom it was gathered protected. + Administrators should restrict read access to this data to + specifically authorized individuals or agents that recognize the + privacy implications of its release. In situations where read access + to this data cannot be restricted, it should not be gathered. + + Systems that implement the objects in this MIB module have the + capability of measuring the time taken to execute transactions. + Depending on the transaction type, some or all of this transaction + time may be associated with the time taken to perform security + calculations. Such data may help an attacker to use timing attacks + to extract secrets from the systems involved in the transactions. + See [10] for more information. + + SNMP versions prior to SNMPv3 did not include adequate security. + Even if the network itself is secure (for example by using IPSec), + even then, there is no control as to who on the secure network is + allowed to access and GET/SET (read/change/create/delete) the objects + in this MIB module. + + It is RECOMMENDED that implementers consider the security features as + provided by the SNMPv3 framework (see [8], section 8), including full + support for the SNMPv3 cryptographic mechanisms (for authentication + and privacy). + + Further, deployment of SNMP versions prior to SNMPv3 is NOT + RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to + enable cryptographic security. It is then a customer/operator + responsibility to ensure that the SNMP entity giving access to an + instance of this MIB module is properly configured to give access to + the objects only to those principals (users) that have legitimate + rights to indeed GET or SET (change/create/delete) them. + + + + + + + + + + + + + + + + +Waldbusser Standards Track [Page 59] + +RFC 3729 APM MIB March 2004 + + +5. References + +5.1. Normative References + + [1] McCloghrie, K., Perkins, D. and J. Schoenwaelder, "Structure of + Management Information Version 2 (SMIv2)", STD 58, RFC 2578, + April 1999. + + [2] McCloghrie, K., Perkins, D. and J. Schoenwaelder, "Textual + Conventions for SMIv2", STD 58, RFC 2579, April 1999. + + [3] McCloghrie, K., Perkins, D. and J. Schoenwaelder, "Conformance + Statements for SMIv2", STD 58, RFC 2580, April 1999. + + [4] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB", + RFC 2863, June 2000. + + [5] Waldbusser, S., "Remote Network Monitoring Management + Information Base Version 2 using SMIv2", RFC 2021, January 1997. + + [6] Bierman, A., Bucci, C. and R. Iddon, "Remote Network Monitoring + MIB Protocol Identifiers", RFC 2895, August 2000. + + [7] Waldbusser, S., "Remote Network Monitoring Management + Information Base", STD 59, RFC 2819, May 2000. + +5.2. Informative References + + [8] Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction + and Applicability Statements for Internet-Standard Management + Framework", RFC 3410, December 2002. + + [9] Berners-Lee, T., Masinter, L. and M. McCahill, "Uniform Resource + Locators (URL)", RFC 1738, December 1994. + + [10] Boneh, D. and D. Brumley, "Remote timing attacks are practical", + Proceedings of 12th USENIX Security Symposium, August 2003. + +6. Author's Address + + Steven Waldbusser + EMail: waldbusser@nextbeacon.com + + + + + + + + + +Waldbusser Standards Track [Page 60] + +RFC 3729 APM MIB March 2004 + + +7. Full Copyright Statement + + Copyright (C) The Internet Society (2004). This document is subject + to the rights, licenses and restrictions contained in BCP 78 and + except as set forth therein, the authors retain all their rights. + + This document and the information contained herein are provided on an + "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS + OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET + ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, + INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE + INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED + WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Intellectual Property + + The IETF takes no position regarding the validity or scope of any + Intellectual Property Rights or other rights that might be claimed to + pertain to the implementation or use of the technology described in + this document or the extent to which any license under such rights + might or might not be available; nor does it represent that it has + made any independent effort to identify any such rights. Information + on the procedures with respect to rights in RFC documents can be + found in BCP 78 and BCP 79. + + Copies of IPR disclosures made to the IETF Secretariat and any + assurances of licenses to be made available, or the result of an + attempt made to obtain a general license or permission for the use of + such proprietary rights by implementers or users of this + specification can be obtained from the IETF on-line IPR repository at + http://www.ietf.org/ipr. + + The IETF invites any interested party to bring to its attention any + copyrights, patents or patent applications, or other proprietary + rights that may cover technology that may be required to implement + this standard. Please address the information to the IETF at ietf- + ipr@ietf.org. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + + + + +Waldbusser Standards Track [Page 61] + -- cgit v1.2.3