From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc513.txt | 171 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 doc/rfc/rfc513.txt (limited to 'doc/rfc/rfc513.txt') diff --git a/doc/rfc/rfc513.txt b/doc/rfc/rfc513.txt new file mode 100644 index 0000000..1611069 --- /dev/null +++ b/doc/rfc/rfc513.txt @@ -0,0 +1,171 @@ + + + + + + +Network Working Group Wayne Hathaway +RFC # 513 AMES-67 +NIC # 16444 30 May 1973 + + + COMMENTS ON THE NEW TELNET SPECIFICATIONS + +I would like to make the following comments on the proposed new TELNET +Protocol Specification (NIC # 15372) and TELNET Option Specification +(NIC 15373). In general I feel the new TELNET protocol is far superior +to the previous version. There are, however, a few items of substance +which I feel should be changed, as well as some recommended editorial +changes. + +I feel the most significant error concerns the "Note on 'Sub- +negotiations'" section of the Option Specification (page 2). The +problem stems from the statements "Each party is presumed to be able to +parse the parameter(s)" and "Finally, if parameters in an option +'subnegotiation' include a byte with a value of 255, it is not necessary +to double this byte in accordance with the general TELNET IAC." These +two statements make the completely unwarranted but all too prevalent +assumption that there is only one "Telnet Interpreter" and that all +TELNET functions are carried out by it. In particular, problems arise +when a TELNET "synch" is received, and the receiving NCP is required to +scan the input looking for "interesting" things. If the subnegotiation +was in fact being carried out by a user process (and not the "TELNET +interpreter") then that user process is probably the only one that knows +how to interpret the SB parameters; the NCP itself would have no way of +parsing them. As a solution to this problem I propose that all +subnegotiation parameters be delimited at the end (perhaps with the same +TELNET command SB) and that they be required to obey all TELNET rules, +including doubling of IAC's. It may be argued that the user process +interpreting the SB itself should do the scanning for "interesting" +things, but I do not feel that this burden should be place on all user +processes. + +The solution to the above problem is in fact fairly simple to define and +implement. The general problem, however, is one of not taking proper +cognizance of what I called "user processes" (processes which are not +network standards, but which are simply programs attempting to do work +using the network). I feel we must be more careful to shape all future +network standards with these very real user processes in mind if in fact +the network will ever be as useful as is possible. + +The second item I object to is the incredibly loose definition of +"interesting" things (an aside: words which are so imprecise as to +require quotation marks should never appear in protocol specifications). +The specifications do define some of these "interesting" things (eg, + + + +Hathaway [Page 1] + +RFC 513 COMMENTS ON THE NEW TELNET SPECIFICATIONS May 1973 + + +most TELNET commands) but they then include "and perhaps other +characters or character strings as well". To eliminate the difficulty +of implementing an undefined set of "interesting" things, I would +propose that the set of "interesting" things, contain only the DM +command itself. The TELNET "synch" would thus be defined as "discard +all input up to and including the next DM command." This change should +cause no problems with user-generated "interesting" things if they are +sent after the "synch" (as specified in the proposed new File Transfer +Protocol Specifications). System-generated signals (such as option +requests) could be discarded, however, so some additional discussion is +in order. If the recommendation that requests not be sent except when +something changes is followed, the spontaneous generation of +"interesting" things by TELNET itself (whatever that implies) would seem +to be rare, especially at the same time that users are generating +"synch's". A more positive solution could be had by defining a "synch +response" (SR) TELNET command. The SR command would be sent when the +INS and DM had both been processed (ie, when the "synch" had been +completely received). If a process should ever receive an SR when it +has an option request outstanding, the request has been discarded and +must be repeated. User processes which carry on option negotiations +would be the generators of any "synch's" so they can handle discarded +option requests as desired. Note that this assumes that the TELNET +process itself will never generate a spontaneous "synch"; comments are +solicited on this. Another possible solution would be to define a +"TIMING-MARK" TELNET command (see "TELNET Timing Mark Option", NIC # +16238), which would be sent immediately following the DM of a "synch". +The response to the TIMING-MARK (also to be defined) would mean the same +as the proposed SR command. + +The final non-editorial comment concerns the need for some means of +specifying horizontal tab positions and use. This is quite a nuisance +when dealing with systems which normally handle tabs for local +terminals. Perhaps this issue can be best handled with an appropriate +option; comments are solicited. + +The only editorial comments are on the TELNET Protocol document, which I +reference below by page number. + +On page 8 the parenthetical comment "(i.e., when a process at one end of +a TELNET connection is 'blocked on input')" should either be removed or +rewritten to avoid the (to me) incomprehensible phrase "blocked on +input." If additional discussion is felt to be necessary, I would +propose "i.e., when a process at one end of a TELNET connection cannot +proceed without additional input)." If examples are felt necessary, I +would propose "(e.g., in the state characterized by the Multics term +'blocked on input')." The parallel could also be drawn between the GA +and the concept of a "read command" being issued to request more input. + + + + +Hathaway [Page 2] + +RFC 513 COMMENTS ON THE NEW TELNET SPECIFICATIONS May 1973 + + +On page 10 I feel that there needs to be some more discussion of the +Abort Output (AO) command, particularly the statement that it "allows a +process... to run to completion... but without sending the output to the +user's terminal." The problem is that nothing is said about when output +is to resume (presumably at the next system prompt character). I +realized that the AO is meant only to invoke this function on systems +which already provide it, but it would seem to be more useful if more +fully specified. + +On page 11 I do not understand what the example "(e.g., an over-strike)" +is trying to say. Speaking of an overstrike on output would imply to me +that both characters are to be printed in the same print position, +reducing the EC to a backspace. Some more discussion should also be +added as to what EC (and EL) mean on output (if anything). + +On page 11 I would like to see the word "promptly" (which is in +quotation marks) either eliminated or defined, as per my earlier aside +comment. The phrase "if necessary" in the last line also seems +unnecessary. + +On page 12 my proposed redefinition of "interesting" signals would +remove the middle paragraph entirely and would modify the third +paragraph substantially. The line "discard all characters which would +have had an effect on the NVT printer" should be changed, however, as it +seems BELL's should also be discarded. + +On page 14 I see no reason why the sequence "CR NUL" is required to +generate a "CR" only, and also object to "and the CR character must be +avoided in other contexts." Either some supporting discussion should be +added or this restriction should be removed. + + + + + + + + + + + [ This RFC was put into machine readable form for entry ] + [ into the online RFC archives by Alex McKenzie with ] + [ support from GTE, formerly BBN Corp. 9/99 ] + + + + + + + + +Hathaway [Page 3] + -- cgit v1.2.3