From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc5260.txt | 731 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 731 insertions(+) create mode 100644 doc/rfc/rfc5260.txt (limited to 'doc/rfc/rfc5260.txt') diff --git a/doc/rfc/rfc5260.txt b/doc/rfc/rfc5260.txt new file mode 100644 index 0000000..0baf5f6 --- /dev/null +++ b/doc/rfc/rfc5260.txt @@ -0,0 +1,731 @@ + + + + + + +Network Working Group N. Freed +Request for Comments: 5260 Sun Microsystems +Category: Standards Track July 2008 + + + Sieve Email Filtering: Date and Index Extensions + +Status of This Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Abstract + + This document describes the "date" and "index" extensions to the + Sieve email filtering language. The "date" extension gives Sieve the + ability to test date and time values in various ways. The "index" + extension provides a means to limit header and address tests to + specific instances of header fields when header fields are repeated. + +Table of Contents + + 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2 + 2. Conventions Used in This Document . . . . . . . . . . . . . . 2 + 3. Capability Identifiers . . . . . . . . . . . . . . . . . . . . 3 + 4. Date Test . . . . . . . . . . . . . . . . . . . . . . . . . . 3 + 4.1. Zone and Originalzone Arguments . . . . . . . . . . . . . 4 + 4.2. Date-part Argument . . . . . . . . . . . . . . . . . . . . 4 + 4.3. Comparator Interactions with Date-part Arguments . . . . . 5 + 4.4. Examples . . . . . . . . . . . . . . . . . . . . . . . . . 6 + 5. Currentdate Test . . . . . . . . . . . . . . . . . . . . . . . 6 + 5.1. Examples . . . . . . . . . . . . . . . . . . . . . . . . . 6 + 6. Index Extension . . . . . . . . . . . . . . . . . . . . . . . 7 + 6.1. Example . . . . . . . . . . . . . . . . . . . . . . . . . 8 + 7. Security Considerations . . . . . . . . . . . . . . . . . . . 8 + 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9 + 9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 9 + 9.1. Normative References . . . . . . . . . . . . . . . . . . . 9 + 9.2. Informative References . . . . . . . . . . . . . . . . . . 10 + Appendix A. Julian Date Conversions . . . . . . . . . . . . . . . 11 + Appendix B. Acknowledgements . . . . . . . . . . . . . . . . . . 12 + + + + + + + +Freed Standards Track [Page 1] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + +1. Introduction + + Sieve [RFC5228] is a language for filtering email messages at or + around the time of final delivery. It is designed to be + implementable on either a mail client or mail server. It is meant to + be extensible, simple, and independent of access protocol, mail + architecture, and operating system. It is suitable for running on a + mail server where users may not be allowed to execute arbitrary + programs, such as on black box Internet Message Access Protocol + [RFC3501] servers, as it does not have user-controlled loops or the + ability to run external programs. + + The "date" extension provides a new date test to extract and match + date/time information from structured header fields. The date test + is similar in concept to the address test specified in [RFC5228], + which performs similar operations on addresses in header fields. + + The "date" extension also provides a currentdate test that operates + on the date and time when the Sieve script is executed. + + Some header fields containing date/time information, e.g., Received:, + naturally occur more than once in a single header. In such cases it + is useful to be able to restrict the date test to some subset of the + fields that are present. For example, it may be useful to apply a + date test to the last (earliest) Received: field. Additionally, it + may also be useful to apply similar restrictions to either the header + or address tests specified in [RFC5228]. + + For this reason, this specification also defines an "index" + extension. This extension adds two additional tagged arguments + :index and :last to the header, address, and date tests. If present, + these arguments specify which occurrence of the named header field is + to be tested. + +2. Conventions Used in This Document + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this + document are to be interpreted as described in RFC 2119 [RFC2119]. + + The terms used to describe the various components of the Sieve + language are taken from Section 1.1 of [RFC5228]. Section 2 of the + same document describes basic Sieve language syntax and semantics. + The date-time syntactic element defined using ABNF notation [RFC5234] + in [RFC3339] is also used here. + + + + + + +Freed Standards Track [Page 2] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + +3. Capability Identifiers + + The capability strings associated with the two extensions defined in + this document are "date" and "index". + +4. Date Test + + Usage: date [<":zone" > / ":originalzone"] + [COMPARATOR] [MATCH-TYPE] + + + The date test matches date/time information derived from headers + containing [RFC2822] date-time values. The date/time information is + extracted from the header, shifted to the specified time zone, and + the value of the given date-part is determined. The test returns + true if the resulting string matches any of the strings specified in + the key-list, as controlled by the comparator and match keywords. + The date test returns false unconditionally if the specified header + field does not exist, the field exists but does not contain a + syntactically valid date-time specification, the date-time isn't + valid according to the rules of the calendar system (e.g., January + 32nd, February 29 in a non-leap year), or the resulting string fails + to match any key-list value. + + The type of match defaults to ":is" and the default comparator is + "i;ascii-casemap". + + Unlike the header and address tests, the date test can only be + applied to a single header field at a time. If multiple header + fields with the same name are present, only the first field that is + found is used. (Note, however, that this behavior can be modified + with the "index" extension defined below.) These restrictions + simplify the test and keep the meaning clear. + + The "relational" extension [RFC5231] adds a match type called + ":count". The count of a date test is 1 if the specified field + exists and contains a valid date; 0, otherwise. + + Implementations MUST support extraction of RFC 2822 date-time + information that either makes up the entire header field (e.g., as it + does in a standard Date: header field) or appears at the end of a + header field following a semicolon (e.g., as it does in a standard + Received: header field). Implementations MAY support extraction of + date and time information in RFC2822 or other formats that appears in + other positions in header field content. In the case of a field + containing more than one date or time value, the last one that + appears SHOULD be used. + + + + +Freed Standards Track [Page 3] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + +4.1. Zone and Originalzone Arguments + + The :originalzone argument specifies that the time zone offset + originally in the extracted date-time value should be retained. The + :zone argument specifies a specific time zone offset that the date- + time value is to be shifted to prior to testing. It is an error to + specify both :zone and :originalzone. + + The value of time-zone MUST be an offset relative to UTC with the + following syntax: + + time-zone = ( "+" / "-" ) 4DIGIT + + The "+" or "-" indicates whether the time-of-day is ahead of (i.e., + east of) or behind (i.e., west of) UTC. The first two digits + indicate the number of hours difference from Universal Time, and the + last two digits indicate the number of minutes difference from + Universal Time. Note that this agrees with the RFC 2822 format for + time zone offsets, not the ISO 8601 format. + + If both the :zone and :originalzone arguments are omitted, the local + time zone MUST be used. + +4.2. Date-part Argument + + The date-part argument specifies a particular part of the resulting + date/time value to match against the key-list. Possible case- + insensitive values are: + + "year" => the year, "0000" .. "9999". + "month" => the month, "01" .. "12". + "day" => the day, "01" .. "31". + "date" => the date in "yyyy-mm-dd" format. + "julian" => the Modified Julian Day, that is, the date + expressed as an integer number of days since + 00:00 UTC on November 17, 1858 (using the Gregorian + calendar). This corresponds to the regular + Julian Day minus 2400000.5. Sample routines to + convert to and from modified Julian dates are + given in Appendix A. + "hour" => the hour, "00" .. "23". + "minute" => the minute, "00" .. "59". + "second" => the second, "00" .. "60". + "time" => the time in "hh:mm:ss" format. + "iso8601" => the date and time in restricted ISO 8601 format. + "std11" => the date and time in a format appropriate + for use in a Date: header field [RFC2822]. + + + + +Freed Standards Track [Page 4] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + + "zone" => the time zone in use. If the user specified a + time zone with ":zone", "zone" will + contain that value. If :originalzone is specified + this value will be the original zone specified + in the date-time value. If neither argument is + specified the value will be the server's default + time zone in offset format "+hhmm" or "-hhmm". An + offset of 0 (Zulu) always has a positive sign. + "weekday" => the day of the week expressed as an integer between + "0" and "6". "0" is Sunday, "1" is Monday, etc. + + The restricted ISO 8601 format is specified by the date-time ABNF + production given in [RFC3339], Section 5.6, with the added + restrictions that the letters "T" and "Z" MUST be in upper case, and + a time zone offset of zero MUST be represented by "Z" and not + "+00:00". + +4.3. Comparator Interactions with Date-part Arguments + + Not all comparators are suitable with all date-part arguments. In + general, the date-parts can be compared and tested for equality with + either "i;ascii-casemap" (the default) or "i;octet", but there are + two exceptions: + + julian This is an integer, and may or may not have leading zeros. + As such, "i;ascii-numeric" is almost certainly the best + comparator to use with it. + + std11 This is provided as a means to obtain date/time values in a + format appropriate for inclusion in email header fields. The + wide range of possible syntaxes for a std11 date/time -- + which implementations of this extension are free to use when + composing a std11 string -- makes this format a poor choice + for comparisons. Nevertheless, if a comparison must be + performed, this is case-insensitive, and therefore "i;ascii- + casemap" needs to be used. + + "year", "month", "day", "hour", "minute", "second" and "weekday" all + use fixed-width string representations of integers, and can therefore + be compared with "i;octet", "i;ascii-casemap", and "i;ascii-numeric" + with equivalent results. + + "date" and "time" also use fixed-width string representations of + integers, and can therefore be compared with "i;octet" and "i;ascii- + casemap"; however, "i;ascii-numeric" can't be used with it, as + "i;ascii-numeric" doesn't allow for non-digit characters. + + + + + +Freed Standards Track [Page 5] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + +4.4. Examples + + The Date: field can be checked to test when the sender claims to have + created the message and act accordingly: + + require ["date", "relational", "fileinto"]; + if allof(header :is "from" "boss@example.com", + date :value "ge" :originalzone "date" "hour" "09", + date :value "lt" :originalzone "date" "hour" "17") + { fileinto "urgent"; } + + Testing the initial Received: field can provide an indication of when + a message was actually received by the local system: + + require ["date", "relational", "fileinto"]; + if anyof(date :is "received" "weekday" "0", + date :is "received" "weekday" "6") + { fileinto "weekend"; } + +5. Currentdate Test + + Usage: currentdate [":zone" ] + [COMPARATOR] [MATCH-TYPE] + + + + The currentdate test is similar to the date test, except that it + operates on the current date/time rather than a value extracted from + the message header. In particular, the ":zone" and date-part + arguments are the same as those in the date test. + + All currentdate tests in a single Sieve script MUST refer to the same + point in time during execution of the script. + + The :count value of a currentdate test is always 1. + +5.1. Examples + + The simplest use of currentdate is to have an action that only + operates at certain times. For example, a user might want to have + messages redirected to their pager after business hours and on + weekends: + + + + + + + + + +Freed Standards Track [Page 6] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + + require ["date", "relational"]; + if anyof(currentdate :is "weekday" "0", + currentdate :is "weekday" "6", + currentdate :value "lt" "hour" "09", + currentdate :value "ge" "hour" "17") + { redirect "pager@example.com"; } + + Currentdate can be used to set up vacation [RFC5230] responses in + advance and to stop response generation automatically: + + require ["date", "relational", "vacation"]; + if allof(currentdate :value "ge" "date" "2007-06-30", + currentdate :value "le" "date" "2007-07-07") + { vacation :days 7 "I'm away during the first week in July."; } + + Currentdate may also be used in conjunction with the variables + extension to pass time-dependent arguments to other tests and + actions. The following Sieve places messages in a folder named + according to the current month and year: + + require ["date", "variables", "fileinto"]; + if currentdate :matches "month" "*" { set "month" "${1}"; } + if currentdate :matches "year" "*" { set "year" "${1}"; } + fileinto "${month}-${year}"; + + Finally, currentdate can be used in conjunction with the editheader + extension to insert a header-field containing date/time information: + + require ["variables", "date", "editheader"]; + if currentdate :matches "std11" "*" + {addheader "Processing-date" "${0}";} + +6. Index Extension + + The "index" extension, if specified, adds optional :index and :last + arguments to the header, address, and date tests as follows: + + Syntax: date [":index" [":last"]] + [<":zone" > / ":originalzone"] + [COMPARATOR] [MATCH-TYPE] + + + + Syntax: header [":index" [":last"]] + [COMPARATOR] [MATCH-TYPE] + + + + + + +Freed Standards Track [Page 7] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + + Syntax: address [":index" [":last"]] + [ADDRESS-PART] [COMPARATOR] [MATCH-TYPE] + + + If :index is specified, the attempts to match a value are + limited to the header field fieldno (beginning at 1, the first named + header field). If :last is also specified, the count is backwards; 1 + denotes the last named header field, 2 the second to last, and so on. + Specifying :last without :index is an error. + + :index only counts separate header fields, not multiple occurrences + within a single field. In particular, :index cannot be used to test + a specific address in an address list contained within a single + header field. + + Both header and address allow the specification of more than one + header field name. If more than one header field name is specified, + all the named header fields are counted in the order specified by the + header-list. + +6.1. Example + + Mail delivery may involve multiple hops, resulting in the Received: + field containing information about when a message first entered the + local administrative domain being the second or subsequent field in + the message. As long as the field offset is consistent, it can be + tested: + + # Implement the Internet-Draft cutoff date check assuming the + # second Received: field specifies when the message first + # entered the local email infrastructure. + require ["date", "relational", "index"]; + if date :value "gt" :index 2 :zone "-0500" "received" + "iso8601" "2007-02-26T09:00:00-05:00", + { redirect "aftercutoff@example.org"; } + +7. Security Considerations + + The facilities defined here, like the facilities in the base Sieve + specification, operate on message header information that can easily + be forged. Note, however, that some fields are inherently more + reliable than others. For example, the Date: field is typically + inserted by the message sender and can be altered at any point. By + contrast, the uppermost Received: field is typically inserted by the + local mail system and is therefore difficult for the sender or an + intermediary to falsify. + + + + + +Freed Standards Track [Page 8] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + + Use of the currentdate test makes script behavior inherently less + predictable and harder to analyze. This may have consequences for + systems that use script analysis to try and spot problematic scripts. + + All of the security considerations given in the base Sieve + specification also apply to these extensions. + +8. IANA Considerations + + The following templates specify the IANA registrations of the two + Sieve extensions specified in this document: + + To: iana@iana.org + Subject: Registration of new Sieve extensions + + Capability name: date + Description: The "date" extension gives Sieve the ability + to test date and time values. + RFC number: RFC 5260 + Contact address: Sieve discussion list + + Capability name: index + Description: The "index" extension provides a means to + limit header and address tests to specific + instances when more than one field of a + given type is present. + RFC number: RFC 5260 + Contact address: Sieve discussion list + +9. References + +9.1. Normative References + + [CALGO199] Tantzen, R., "Algorithm 199: Conversions Between Calendar + Date and Julian Day Number", Collected Algorithms from + CACM 199. + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC2822] Resnick, P., "Internet Message Format", RFC 2822, + April 2001. + + [RFC3339] Klyne, G., Ed. and C. Newman, "Date and Time on the + Internet: Timestamps", RFC 3339, July 2002. + + [RFC5228] Guenther, P. and T. Showalter, "Sieve: An Email Filtering + Language", RFC 5228, January 2008. + + + +Freed Standards Track [Page 9] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + + [RFC5231] Segmuller, W. and B. Leiba, "Sieve Email Filtering: + Relational Extension", RFC 5231, January 2008. + + [RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax + Specifications: ABNF", STD 68, RFC 5234, January 2008. + +9.2. Informative References + + [RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION + 4rev1", RFC 3501, March 2003. + + [RFC5230] Showalter, T. and N. Freed, "Sieve Email Filtering: + Vacation Extension", RFC 5230, January 2008. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Freed Standards Track [Page 10] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + +Appendix A. Julian Date Conversions + + The following C routines show how to translate day/month/year + information to and from modified Julian dates. These routines are + straightforward translations of the Algol routines specified in CACM + Algorithm 199 [CALGO199]. + + Given the day, month, and year, jday returns the modified Julian + date. + + int jday(int year, int month, int day) + { + int j, c, ya; + + if (month > 2) + month -= 3; + else + { + month += 9; + year--; + } + c = year / 100; + ya = year - c * 100; + return (c * 146097 / 4 + ya * 1461 / 4 + (month * 153 + 2) / 5 + + day + 1721119); + } + + + + + + + + + + + + + + + + + + + + + + + + + +Freed Standards Track [Page 11] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + + Given j, the modified Julian date, jdate returns the day, month, and + year. + + void jdate(int j, int *year, int *month, int *day) + { + int y, m, d; + + j -= 1721119; + y = (j * 4 - 1) / 146097; + j = j * 4 - y * 146097 - 1; + d = j / 4; + j = (d * 4 + 3) / 1461; + d = d * 4 - j * 1461 + 3; + d = (d + 4) / 4; + m = (d * 5 - 3) / 153; + d = d * 5 - m * 153 - 3; + *day = (d + 5) / 5; + *year = y * 100 + j; + if (m < 10) + *month = m + 3; + else + { + *month = m - 9; + *year += 1; + } + } + +Appendix B. Acknowledgements + + Dave Cridland contributed the text describing the proper comparators + to use with different date-parts. Cyrus Daboo, Frank Ellerman, + Alexey Melnikov, Chris Newman, Dilyan Palauzov, and Aaron Stone + provided helpful suggestions and corrections. + +Author's Address + + Ned Freed + Sun Microsystems + 800 Royal Oaks + Monrovia, CA 91016-6347 + USA + + Phone: +1 909 457 4293 + EMail: ned.freed@mrochek.com + + + + + + + +Freed Standards Track [Page 12] + +RFC 5260 Sieve Date and Index Extensions July 2008 + + +Full Copyright Statement + + Copyright (C) The IETF Trust (2008). + + This document is subject to the rights, licenses and restrictions + contained in BCP 78, and except as set forth therein, the authors + retain all their rights. + + This document and the information contained herein are provided on an + "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS + OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND + THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF + THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED + WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Intellectual Property + + The IETF takes no position regarding the validity or scope of any + Intellectual Property Rights or other rights that might be claimed to + pertain to the implementation or use of the technology described in + this document or the extent to which any license under such rights + might or might not be available; nor does it represent that it has + made any independent effort to identify any such rights. Information + on the procedures with respect to rights in RFC documents can be + found in BCP 78 and BCP 79. + + Copies of IPR disclosures made to the IETF Secretariat and any + assurances of licenses to be made available, or the result of an + attempt made to obtain a general license or permission for the use of + such proprietary rights by implementers or users of this + specification can be obtained from the IETF on-line IPR repository at + http://www.ietf.org/ipr. + + The IETF invites any interested party to bring to its attention any + copyrights, patents or patent applications, or other proprietary + rights that may cover technology that may be required to implement + this standard. Please address the information to the IETF at + ietf-ipr@ietf.org. + + + + + + + + + + + + +Freed Standards Track [Page 13] + -- cgit v1.2.3