From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc576.txt | 115 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 doc/rfc/rfc576.txt (limited to 'doc/rfc/rfc576.txt') diff --git a/doc/rfc/rfc576.txt b/doc/rfc/rfc576.txt new file mode 100644 index 0000000..6f281c3 --- /dev/null +++ b/doc/rfc/rfc576.txt @@ -0,0 +1,115 @@ + + + + + + +Network Working Group K. Victor +Request for Comments: 576 September 1973 + + Proposal for Modifying Linking + + We plan to modify the link jsys in TENEX to work in a little bit + better way in terms of the user interface. Conversations with BBN + indicate that they have no complaints with the current + implementation. However, if after we have gained experience with our + new implementation, we will let them know about it and they will + review the new implementation and possibly accept it as part of + standard TENEX. + + I would appreciate feedback in the next couple of days so that I can + go ahead and implement this proposal (or a modified proposal or + nothing...). (I estimate that it will only take a couple of hours to + implement!) + + (Note that by modifying the jsys, the proposed changes as specified + will be in effect at the user level in the exec.) + + + The default state for all users will remain as it currently is, i.e. + RECEIVE LINKS. + + Now, consider users A, B, and C. + + If A and B link to each other they are now holding a conversation. + + After establishing a conversation, all members of the conversation + will be placed in the REFUSE LINKS state. + + If user C (or any other user) now tries to link to user A (or B), the + bell will ring on users A (or B) and C terminals indicating that A + (or B) is in a REFUSE LINKS state. + + If A ignores the bell then C is not admitted to the conversation + and A and B can continue their conversation as if C had never + tried to enter the conversation. + + However, if A does a RECEIVE LINKS while the bell is ringing (the + bell rings for approximately 15 seconds), then C will be linked + into the conversation and not to just user A. Thus A and B will + be linked, A and C will be linked, and B and C will be linked, + i.e., a three way conversation. Also, users A, B, and C will be + in the REFUSE LINKS state. + + + + + +Victor [Page 1] + +RFC 576 Proposal for modifying linking September 1973 + + + Whenever a user leaves a conversation, his state will be set + automatically to RECEIVE LINKS. + + Thus, when user C does a break links the resulting states will be: + + A and B will be linked and both will be in REFUSE LINKS + + C will be out of the conversation and will be in RECEIVE LINKS + + Now, when A or B does a BREAK LINKS there will no longer be a + conversation and both A and B will be in the RECEIVE LINKS state. + + To summarize: + + After any conversation is established, all members of the + conversation are placed in the REFUSED LINKS state. + + When a user links to a terminal or a user, he is in fact linking + into a conversation if one exists or to an individual if no + conversation is taking place. + + When a user leaves a conversation, she is placed in the RECEIVE + LINKS state. + + Changes to the TLINK jsys will be necessary to implement the above. + No changes are required in the EXEC. In addition to the above + changes, we will add a new jsys that will return the link and advise + status for a passed terminal, i.e., you will be able to tell which + lines are linked to the passed terminal, which lines the passed + terminal is linked to, which line the passed terminal is advising, + and/or which line is advising the passed terminal. This information + will probably be incorporated into the systat printout, the where is + printout, and will probably be used within NLS for shared screen + work. + + [This RFC was put into machine readable form for entry] + [into the online RFC archives by Bob German 7/99] + + + + + + + + + + + + + + +Victor [Page 2] + -- cgit v1.2.3