From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc5864.txt | 563 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 563 insertions(+) create mode 100644 doc/rfc/rfc5864.txt (limited to 'doc/rfc/rfc5864.txt') diff --git a/doc/rfc/rfc5864.txt b/doc/rfc/rfc5864.txt new file mode 100644 index 0000000..b6873a3 --- /dev/null +++ b/doc/rfc/rfc5864.txt @@ -0,0 +1,563 @@ + + + + + + +Internet Engineering Task Force (IETF) R. Allbery +Request for Comments: 5864 Stanford University +Updates: 1183 April 2010 +Category: Standards Track +ISSN: 2070-1721 + + + DNS SRV Resource Records for AFS + +Abstract + + This document specifies how to use DNS (Domain Name Service) SRV RRs + (Resource Records) to locate services for the AFS distributed file + system and how the priority and weight values of the SRV RR should be + interpreted in the server ranking system used by AFS. It updates RFC + 1183 to deprecate the use of the AFSDB RR to locate AFS cell database + servers and provides guidance for backward compatibility. + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 5741. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + http://www.rfc-editor.org/info/rfc5864. + +Copyright Notice + + Copyright (c) 2010 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. + + + + + +Allbery Standards Track [Page 1] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + +Table of Contents + + 1. Overview and Rationale ..........................................2 + 2. Scope ...........................................................3 + 3. Requirements Notation ...........................................3 + 4. DNS SRV RRs for AFS .............................................4 + 4.1. Interpretation as AFS Preference Ranks .....................5 + 5. Use of AFSDB RRs ................................................6 + 6. Example .........................................................8 + 7. Security Considerations .........................................9 + 8. References ......................................................9 + 8.1. Normative References .......................................9 + 8.2. Informative References ....................................10 + +1. Overview and Rationale + + AFS (a registered trademark of IBM Corporation) is a distributed file + system (see [AFS1] and [AFS2]). Its most widely used implementations + are [OPENAFS] and [ARLA]. + + AFS is organized administratively into cells. Each AFS cell consists + of one or more Volume Location Database (VLDB) servers, one or more + Protection Service (PTS) servers, and one or more file servers and + volume servers, plus possible additional services not relevant to + this document. Data stored in AFS is divided into collections of + files called volumes. An AFS protocol client, when accessing a file + within a specific AFS cell, first contacts a VLDB server for that + cell to determine the file server for the AFS volume in which that + file is located, and then contacts that file server directly to + access the file. A client may also need to contact a PTS server for + that cell to register before accessing files in that cell or to query + protection database information. + + An AFS client therefore needs to determine, for a given AFS cell, the + VLDB and possibly the PTS servers for that cell. (Traditionally, the + VLDB and PTS servers are provided by the same host.) Once the client + is in contact with the VLDB server, it locates file and volume + servers through AFS protocol queries to the VLDB server. Originally, + VLDB server information was configured separately on each client in a + file called the CellServDB file. [RFC1183] specified the DNS RR + (Resource Record) AFSDB to locate VLDB servers for AFS. + + Subsequent to [RFC1183], a general DNS RR was defined by [RFC2782] + for service location for any service. This DNS SRV RR has several + advantages over the AFSDB RR: + + + + + + +Allbery Standards Track [Page 2] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + + o AFSDB RRs do not support priority or ranking, leaving AFS cell + administrators without a way to indicate which VLDB servers + clients should prefer. + + o AFSDB RRs do not include protocol or port information, implicitly + assuming that all VLDB servers will be contacted over the standard + port and the UDP. Future changes to the AFS protocol may require + separate VLDB server lists for UDP and TCP traffic, and some uses + of AFS, such as providing VLDB service for multiple cells from the + same systems, require use of different ports. + + o Clients using AFSDB RRs must assume that VLDB and PTS services are + provided by the same host, but it may be useful to separate VLDB + servers from PTS servers. + + o DNS SRV RRs are in widespread use, whereas AFSDB RRs are a little- + known and little-supported corner of the DNS protocol. + + For those reasons, it is desirable to move AFS service location from + the AFSDB RR to DNS SRV RRs. + +2. Scope + + This document describes the format and use of DNS SRV RRs for AFS + service location and deprecates the AFSDB RR. It also provides + guidance for transition from the AFSDB RR to DNS SRV RRs and + recommendations for backward compatibility. + + Documentation of the AFS protocol, the exact purpose and use of the + VLDB and PTS services, and other information about AFS are outside + the scope of this document. + + AFSDB RRs may also be used for locating servers for the Open Software + Foundation's (OSF's) Distributed Computing Environment (DCE) + authenticated naming system, as described in [RFC1183]. Service + location for DCE servers is outside the scope of this document and is + not modified by this specification. + +3. Requirements Notation + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this + document are to be interpreted as described in [RFC2119]. + + + + + + + + +Allbery Standards Track [Page 3] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + +4. DNS SRV RRs for AFS + + The label of a DNS SRV RR, as defined in [RFC2782], is: + + _._. + + The following values for advertise servers providing AFS + services: + + afs3-vlserver: servers providing AFS VLDB services. + + afs3-prserver: servers providing AFS PTS services. + + Other AFS services, such as file and volume management services, are + located through the VLDB service and therefore do not use DNS SRV + RRs. + + MUST be "udp" for the current AFS protocol, which uses Rx + over UDP. Other values may be used for future revisions of the AFS + protocol supporting other protocols, such as Rx over TCP. + + MUST be the AFS cell name for which the identified server + provides AFS services. Clients MUST query DNS SRV RRs only for a + value exactly matching the AFS cell of interest. They MUST + NOT remove leading components to search for more general DNS SRV RRs. + The AFS cell "prod.example.com" and the AFS cell "example.com" are + entirely different cells in the AFS protocol and VLDB servers for the + latter cannot provide information for the former. + + NOTE: As with AFSDB RRs, this means that DNS SRV RRs can only be + used to locate AFS services for cells whose naming matches the + structure of the DNS. This is not a requirement of the AFS + protocol, but sites creating new AFS cells SHOULD use names that + follow the structure of the DNS and that result in DNS SRV RRs + under their administrative control. This both permits use of DNS + SRV RRs instead of client configuration and helps avoid naming + conflicts between separate AFS cells. + + DNS SRV RRs include a priority and a weight. As defined in the DNS + SRV RR specification [RFC2782], clients MUST attempt to contact the + target host with the lowest-numbered priority they can reach. AFS + clients that use a ranked algorithm to determine which server to + contact MUST therefore assign a sufficiently distinct rank to targets + with different priorities such that targets with a higher-numbered + priority are only contacted if all targets with a lower-numbered + priority are inaccessible. See Section 4.1 for more information. + + + + + +Allbery Standards Track [Page 4] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + + If there are multiple targets with an equal priority, the weight + value of the DNS SRV RR SHOULD be used as input to a weighted + algorithm for selecting servers. As specified by [RFC2782], larger + weights SHOULD be given a proportionately higher probability of being + selected. In the presence of records containing weights greater than + 0, records with weight 0 should have a very small chance of being + selected. A weight of 0 SHOULD be used if all targets with that + priority are weighted equally. AFS clients MAY take into account + network performance and other protocol metrics along with SRV RR + weights when selecting servers, thereby possibly selecting different + servers than a system based purely on the SRV RRs would indicate. + However, such information MUST NOT override the priority information + in the SRV RR. + + DNS SRV RRs, like all DNS RRs, have a time-to-live (TTL), after which + the SRV record information is no longer valid (see [RFC1034]). DNS + RRs SHOULD be discarded after their TTL, and after the DNS query + repeated. This applies to DNS SRV RRs for AFS as it does for any + other DNS RR. Any information derived from the DNS SRV RRs, such as + preference ranks, MUST be discarded when the DNS SRV RR is expired. + + Implementations are not required to re-run the weighted server + selection algorithm for each call. Instead, they MAY reuse the + results of the algorithm until the DNS SRV RRs expire. Clients could + therefore use a specific server for the lifetime of the DNS SRV + records, which may affect the load distribution properties that DNS + SRV records provide. Server operators should account for this effect + when setting the TTL of those records. + + AFS clients MAY remember which targets are inaccessible by that + client and ignore those targets when determining which server to + contact first. Clients that do this SHOULD have a mechanism to retry + targets that were previously inaccessible and reconsider them + according to their current priority and weight if they become + accessible again. + +4.1. Interpretation as AFS Preference Ranks + + Several AFS implementations use a ranking algorithm that assigns + numbers representing a preference rank to each server when the client + first contacts that AFS cell and then prefers the server with the + lowest rank unless that server goes down. Clients using this + algorithm SHOULD assign their ranks as follows: + + 1. Sort targets by priority and assign a base rank value to each + target based on its priority. Each base rank value MUST be + sufficiently different from the base rank assigned to any higher- + numbered priority so that higher-numbered targets will only be + + + +Allbery Standards Track [Page 5] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + + attempted if lower-numbered targets cannot be reached. It MUST, + in other words, be farther from the base rank of any distinct + priority than any possible automatic adjustment in the rank. + When calculating base ranks, observe that the numeric value of a + priority has no meaning. Only the ordering of distinct priority + values between multiple SRV RR targets needs to be reflected in + the base ranks. + + 2. For each group of targets with the same priority, follow the + algorithm in [RFC2782] to order those targets. Then, assign + those targets ranks formed by incrementing the base weight for + that priority such that the first selected target has the lowest + rank, the second selected target has the next-lowest rank, and so + on. + + After assignment of ranks, the AFS client MAY then adjust the ranks + dynamically based on network performance and other protocol metrics, + provided that such adjustments are sufficiently small compared to the + difference between base ranks that they cannot cause servers with a + higher-numbered priority to be contacted instead of a server with a + lower-numbered priority. + + The TTL of the DNS SRV RRs MUST be honored by invalidating and + regenerating the server preference ranks with new DNS information + once that TTL has expired. However, accumulated network and protocol + metrics may be retained and reapplied to the new rankings. + + AFS server preference ranks are conventionally numbers between 1 and + 65535. DNS SRV RR priorities are numbers between 0 and 65535. + Implementations following this algorithm could therefore encounter + problems assigning sufficiently distinct base rank values in + exceptional cases of very large numbers of DNS SRV RR targets with + different priorities. However, an AFS cell configuration with + thousands of DNS SRV RR targets for an AFS VLDB or PTS service with + meaningfully distinct priorities is highly improbable. AFS client + implementations encountering a DNS SRV RR containing targets with + more distinct priority values than can be correctly represented as + base ranks SHOULD fall back to generating ranks based solely on + priorities, ignoring other rank inputs, and disabling dynamic + adjustment of ranks. Implementations MUST be able to assign distinct + base ranks as described above for at least ten distinct priority + values. + +5. Use of AFSDB RRs + + Since many AFS client implementations currently support AFSDB RRs but + do not support DNS SRV RRs, AFS cells providing DNS SRV RRs SHOULD + also provide AFSDB RRs. However, be aware that AFSDB RRs do not + + + +Allbery Standards Track [Page 6] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + + provide priority or weighting information; all servers listed in + ASFDB RRs are treated as equal. AFSDB RRs also do not provide port + information. + + An AFS cell using DNS SRV RRs SHOULD therefore also provide an AFSDB + RR listing all AFS servers for which the following statements are all + true: + + o The server provides both VLDB and PTS service on the standard + ports (7003 and 7002, respectively). + + o The server provides these services via Rx over UDP. + + o The server either has the lowest-numbered priority of those listed + in the DNS SRV RRs or the AFS cell administrator believes it + reasonable for clients using AFSDB RRs to use this server by + preference. + + The above is a default recommendation. AFS cell administrators MAY + use different lists of servers in the AFSDB RRs and DNS SRV RRs if + desired for specific effects based on local knowledge of which + clients use AFSDB RRs and which clients use DNS SRV RRs. However, + AFS servers SHOULD NOT be advertised with AFSDB RRs unless they + provide VLDB and PTS services via UDP on the standard ports. (This + falls shy of MUST NOT because it may be useful in some unusual + circumstances to advertise, via an AFSDB RR, a server that provides + only one of the two services, but be aware that such a configuration + may confuse legacy clients.) + + An AFS cell SHOULD have at least one VLDB and at least one PTS server + providing service on the standard ports of 7003 and 7002, + respectively, since clients without DNS SRV RR support cannot locate + servers on non-standard ports. + + Clients SHOULD query DNS SRV RRs by default but SHOULD then fall back + on AFSDB RRs if no DNS SRV RRs are found. In the absence of DNS SRV + RRs, an AFSDB RR of 1 SHOULD be treated as equivalent to + the following pair of DNS SRV RRs: + + _afs3-vlserver._udp. IN SRV 0 0 7003 + _afs3-prserver._udp. IN SRV 0 0 7002 + + is the label of the AFSDB RR, is its TTL and + is the value of the AFSDB RR as specified in [RFC1183]. + This is the fully-qualified domain name of the server. + + + + + + +Allbery Standards Track [Page 7] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + +6. Example + + The following example includes TCP AFS services, separation of a PTS + server from a VLDB server, and use of non-standard ports, all + features that either assume future AFS protocol development or are + not widely supported by current clients. This example is intended to + show the range of possibilities for AFS DNS SRV RRs, not as a + practical example for an existing cell. This is a part of the zone + file for a fictional example.com domain with AFS services. + + $ORIGIN example.com. + @ SOA dns.example.com. root.example.com. ( + 2009100201 3600 3600 604800 86400 ) + NS dns.example.com. + _afs3-vlserver._udp SRV 0 2 7003 afsdb1.example.com. + _afs3-vlserver._udp SRV 0 4 7003 afsdb2.example.com. + _afs3-vlserver._udp SRV 1 0 65500 afsdb3.example.com. + + _afs3-vlserver._tcp SRV 0 0 7003 afsdb3.example.com. + + _afs3-prserver._udp SRV 0 0 7002 afsdb1.example.com. + + _afs3-prserver._tcp SRV 0 0 7002 afsdb3.example.com. + + @ AFSDB 1 afsdb1.example.com. + + dns A 192.0.2.9 + afsdb1 A 192.0.2.10 + afsdb2 A 192.0.2.11 + afsdb3 A 192.0.2.12 + + In this example, the AFS cell name is example.com. + + afsdb1, afsdb2, and afsdb3 all provide VLDB service via UDP. The + first two have the same priority but have weights indicating that + afsdb1 should get about twice as many clients as afsdb2. afsdb3 + should only be used for UDP VLDB service if afsdb1 and afsdb2 are not + accessible and provides that service on a non-standard port (65500). + + Only one host, afsdb1, provides UDP PTS service. + + afsdb3 provides a hypothetical TCP version of AFS VLDB and PTS + service on the standard ports and is the only server providing these + services over TCP for this cell. Such a TCP-based AFS protocol did + not exist at the time this document was written. This example only + shows what the record would look like in a hypothetical future if + such a protocol were developed. + + + + +Allbery Standards Track [Page 8] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + + An AFSDB RR is provided for backward compatibility with older + clients. It lists only afsdb1, since only that host provides both + VLDB and PTS service over UDP on the standard ports. + +7. Security Considerations + + Use of DNS SRV RRs for AFS service locations poses the same security + issues as the existing AFSDB RRs. Specifically, unless the integrity + and authenticity of the DNS response are checked, an attacker may + forge DNS replies and thereby direct clients at a VLDB or PTS server + under the control of the attacker. From there, the attacker may + deceive an AFS client about the volumes and file servers in a cell + and about the contents of files and directories in that cell. If the + client uses cell data in a trusted way, such as by executing programs + out of that AFS cell or using data from the cell as input to other + programs, the attacker may be able to further compromise the security + of the client and trick it into taking action under the attacker's + control. + + This attack can be prevented if the server is authenticated, since + the client can then detect a failure to authenticate the attacker's + servers and thereby detect possible impersonation. However, this + applies only to authenticated AFS access, and much AFS access is + unauthenticated. Furthermore, clients after failure to authenticate + may fall back to unauthenticated access, which the attacker's servers + may permit. + + Using an integrity-protected DNS system such as DNS Security (DNSSEC) + [RFC4033] can prevent this attack via DNS. However, the underlying + vulnerability is inherent in the current AFS protocol and may be + exploited in ways other than DNS forgery, such as by forging the + results of VLDB queries for an AFS cell. Addressing it properly + requires changes to the AFS protocol allowing clients to always + authenticate AFS services and discard unauthenticated data. Even in + the absence of a DNS system with integrity protection, addition of + DNS SRV RRs does not make this vulnerability more severe, only opens + another equivalent point of attack. + +8. References + +8.1. Normative References + + [RFC1034] Mockapetris, P., "Domain names - concepts and facilities", + STD 13, RFC 1034, November 1987. + + [RFC1183] Everhart, C., Mamakos, L., Ullmann, R., and P. + Mockapetris, "New DNS RR Definitions", RFC 1183, + October 1990. + + + +Allbery Standards Track [Page 9] + +RFC 5864 DNS SRV RRs for AFS April 2010 + + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC2782] Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for + specifying the location of services (DNS SRV)", RFC 2782, + February 2000. + +8.2. Informative References + + [AFS1] Howard, J., Kazar, M., Menees, S., Nichols, D., + Satyanarayanan, M., Sidebotham, R., and M. West, "Scale + and Performance in a Distributed File System", ACM Trans. + on Computer Systems 6(1), February 1988. + + [AFS2] Howard, J., "An Overview of the Andrew File System", CMU- + ITC 88-062, February 1988. + + [ARLA] Assar Westerlund, et al., "Arla", May 2001, + . + + [OPENAFS] IBM Corporation, et al., "OpenAFS Documentation", + April 2000, . + + [RFC4033] Arends, R., Austein, R., Larson, M., Massey, D., and S. + Rose, "DNS Security Introduction and Requirements", + RFC 4033, March 2005. + +Author's Address + + Russ Allbery + Stanford University + P.O. Box 20066 + Stanford, CA 94309 + US + + EMail: rra@stanford.edu + URI: http://www.eyrie.org/~eagle/ + + + + + + + + + + + + + + +Allbery Standards Track [Page 10] + -- cgit v1.2.3