From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc6087.txt | 1459 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1459 insertions(+) create mode 100644 doc/rfc/rfc6087.txt (limited to 'doc/rfc/rfc6087.txt') diff --git a/doc/rfc/rfc6087.txt b/doc/rfc/rfc6087.txt new file mode 100644 index 0000000..f24d909 --- /dev/null +++ b/doc/rfc/rfc6087.txt @@ -0,0 +1,1459 @@ + + + + + + +Internet Engineering Task Force (IETF) A. Bierman +Request for Comments: 6087 Brocade +Category: Informational January 2011 +ISSN: 2070-1721 + + + Guidelines for Authors and Reviewers of YANG Data Model Documents + +Abstract + + This memo provides guidelines for authors and reviewers of Standards + Track specifications containing YANG data model modules. Applicable + portions may be used as a basis for reviews of other YANG data model + documents. Recommendations and procedures are defined, which are + intended to increase interoperability and usability of Network + Configuration Protocol (NETCONF) implementations that utilize YANG + data model modules. + +Status of This Memo + + This document is not an Internet Standards Track specification; it is + published for informational purposes. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Not all documents + approved by the IESG are a candidate for any level of Internet + Standard; see Section 2 of RFC 5741. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + http://www.rfc-editor.org/info/rfc6087. + +Copyright Notice + + Copyright (c) 2011 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. + + + +Bierman Informational [Page 1] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +Table of Contents + + 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 + 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 + 2.1. Requirements Notation . . . . . . . . . . . . . . . . . . 3 + 2.2. NETCONF Terms . . . . . . . . . . . . . . . . . . . . . . 4 + 2.3. YANG Terms . . . . . . . . . . . . . . . . . . . . . . . . 4 + 2.4. Terms . . . . . . . . . . . . . . . . . . . . . . . . . . 4 + 3. General Documentation Guidelines . . . . . . . . . . . . . . . 5 + 3.1. Module Copyright . . . . . . . . . . . . . . . . . . . . . 5 + 3.2. Narrative Sections . . . . . . . . . . . . . . . . . . . . 6 + 3.3. Definitions Section . . . . . . . . . . . . . . . . . . . 6 + 3.4. Security Considerations Section . . . . . . . . . . . . . 6 + 3.5. IANA Considerations Section . . . . . . . . . . . . . . . 7 + 3.5.1. Documents that Create a New Namespace . . . . . . . . 7 + 3.5.2. Documents that Extend an Existing Namespace . . . . . 8 + 3.6. Reference Sections . . . . . . . . . . . . . . . . . . . . 8 + 4. YANG Usage Guidelines . . . . . . . . . . . . . . . . . . . . 8 + 4.1. Module Naming Conventions . . . . . . . . . . . . . . . . 8 + 4.2. Identifiers . . . . . . . . . . . . . . . . . . . . . . . 9 + 4.3. Defaults . . . . . . . . . . . . . . . . . . . . . . . . . 9 + 4.4. Conditional Statements . . . . . . . . . . . . . . . . . . 10 + 4.5. XPath Usage . . . . . . . . . . . . . . . . . . . . . . . 10 + 4.6. Lifecycle Management . . . . . . . . . . . . . . . . . . . 11 + 4.7. Module Header, Meta, and Revision Statements . . . . . . . 12 + 4.8. Namespace Assignments . . . . . . . . . . . . . . . . . . 13 + 4.9. Top-Level Data Definitions . . . . . . . . . . . . . . . . 14 + 4.10. Data Types . . . . . . . . . . . . . . . . . . . . . . . . 14 + 4.11. Reusable Type Definitions . . . . . . . . . . . . . . . . 15 + 4.12. Data Definitions . . . . . . . . . . . . . . . . . . . . . 15 + 4.13. Operation Definitions . . . . . . . . . . . . . . . . . . 17 + 4.14. Notification Definitions . . . . . . . . . . . . . . . . . 17 + 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17 + 6. Security Considerations . . . . . . . . . . . . . . . . . . . 18 + 6.1. Security Considerations Section Template . . . . . . . . . 19 + 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 20 + 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 20 + 8.1. Normative References . . . . . . . . . . . . . . . . . . . 20 + 8.2. Informative References . . . . . . . . . . . . . . . . . . 21 + Appendix A. Module Review Checklist . . . . . . . . . . . . . . . 22 + Appendix B. YANG Module Template . . . . . . . . . . . . . . . . 24 + + + + + + + + + + +Bierman Informational [Page 2] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +1. Introduction + + The standardization of network configuration interfaces for use with + the Network Configuration Protocol (NETCONF) [RFC4741] requires a + modular set of data models, which can be reused and extended over + time. + + This document defines a set of usage guidelines for Standards Track + documents containing YANG [RFC6020] data models. YANG is used to + define the data structures, protocol operations, and notification + content used within a NETCONF server. A server that supports a + particular YANG module will support client NETCONF operation + requests, as indicated by the specific content defined in the YANG + module. + + This document is similar to the Structure of Management Information + version 2 (SMIv2) usage guidelines specification [RFC4181] in intent + and structure. However, since that document was written a decade + after SMIv2 modules had been in use, it was published as a 'Best + Current Practice' (BCP). This document is not a BCP, but rather an + informational reference, intended to promote consistency in documents + containing YANG modules. + + Many YANG constructs are defined as optional to use, such as the + description statement. However, in order to maximize + interoperability of NETCONF implementations utilizing YANG data + models, it is desirable to define a set of usage guidelines that may + require a higher level of compliance than the minimum level defined + in the YANG specification. + + In addition, YANG allows constructs such as infinite length + identifiers and string values, or top-level mandatory nodes, that a + compliant server is not required to support. Only constructs that + all servers are required to support can be used in IETF YANG modules. + + This document defines usage guidelines related to the NETCONF + operations layer and NETCONF content layer, as defined in [RFC4741]. + These guidelines are intended to be used by authors and reviewers to + improve the readability and interoperability of published YANG data + models. + +2. Terminology + +2.1. Requirements Notation + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this + document are to be interpreted as described in [RFC2119]. + + + +Bierman Informational [Page 3] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + RFC 2119 language is used here to express the views of the NETMOD + working group regarding content for YANG modules. YANG modules + complying with this document will treat the RFC 2119 terminology as + if it were describing best current practices. + +2.2. NETCONF Terms + + The following terms are defined in [RFC4741] and are not redefined + here: + + o capabilities + + o client + + o operation + + o server + +2.3. YANG Terms + + The following terms are defined in [RFC6020] and are not redefined + here: + + o data node + + o module + + o namespace + + o submodule + + o version + + o YANG + + o YIN + + Note that the term 'module' may be used as a generic term for a YANG + module or submodule. When describing properties that are specific to + submodules, the term 'submodule' is used instead. + +2.4. Terms + + The following terms are used throughout this document: + + published: A stable release of a module or submodule, usually + contained in an RFC. + + + + +Bierman Informational [Page 4] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + unpublished: An unstable release of a module or submodule, usually + contained in an Internet-Draft. + +3. General Documentation Guidelines + + YANG data model modules under review are likely to be contained in + Internet-Drafts. All guidelines for Internet-Draft authors MUST be + followed. The RFC Editor provides guidelines for authors of RFCs, + which are first published as Internet-Drafts. These guidelines + should be followed and are defined in [RFC2223] and updated in + [RFC5741] and "RFC Document Style" [RFC-STYLE]. + + The following sections MUST be present in an Internet-Draft + containing a module: + + o Narrative sections + + o Definitions section + + o Security Considerations section + + o IANA Considerations section + + o References section + +3.1. Module Copyright + + The module description statement MUST contain a reference to the + latest approved IETF Trust Copyright statement, which is available + online at: + + http://trustee.ietf.org/license-info/ + + Each YANG module or submodule contained within an Internet-Draft or + RFC is considered to be a code component. The strings '' and '' MUST be used to identify each code + component. + + The '' tag SHOULD be followed by a string identifying + the file name specified in Section 5.2 of [RFC6020]. The following + example is for the '2010-01-18' revision of the 'ietf-foo' module: + + + + + + + + + + +Bierman Informational [Page 5] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + file "ietf-foo@2010-01-18.yang" + module ietf-foo { + // ... + revision 2010-01-18 { + description "Latest revision"; + reference "RFC XXXX"; + } + // ... + } + + +3.2. Narrative Sections + + The narrative part MUST include an overview section that describes + the scope and field of application of the module(s) defined by the + specification and that specifies the relationship (if any) of these + modules to other standards, particularly to standards containing + other YANG modules. The narrative part SHOULD include one or more + sections to briefly describe the structure of the modules defined in + the specification. + + If the module(s) defined by the specification imports definitions + from other modules (except for those defined in the YANG [RFC6020] or + YANG Types [RFC6021] documents), or are always implemented in + conjunction with other modules, then those facts MUST be noted in the + overview section, as MUST be noted any special interpretations of + definitions in other modules. + +3.3. Definitions Section + + This section contains the module(s) defined by the specification. + These modules MUST be written using the YANG syntax defined in + [RFC6020]. A YIN syntax version of the module MAY also be present in + the document. There MAY also be other types of modules present in + the document, such as SMIv2, which are not affected by these + guidelines. + + See Section 4 for guidelines on YANG usage. + +3.4. Security Considerations Section + + Each specification that defines one or more modules MUST contain a + section that discusses security considerations relevant to those + modules. + + This section MUST be patterned after the latest approved template + (available at + http://www.ops.ietf.org/netconf/yang-security-considerations.txt). + + + +Bierman Informational [Page 6] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + Section 6.1 contains the security considerations template dated + 2010-06-16. Authors MUST check the webpage at the URL listed above + in case there is a more recent version available. + + In particular: + + o Writable data nodes that could be especially disruptive if abused + MUST be explicitly listed by name and the associated security + risks MUST be explained. + + o Readable data nodes that contain especially sensitive information + or that raise significant privacy concerns MUST be explicitly + listed by name and the reasons for the sensitivity/privacy + concerns MUST be explained. + + o Operations (i.e., YANG 'rpc' statements) that are potentially + harmful to system behavior or that raise significant privacy + concerns MUST be explicitly listed by name and the reasons for the + sensitivity/privacy concerns MUST be explained. + +3.5. IANA Considerations Section + + In order to comply with IESG policy as set forth in + http://www.ietf.org/id-info/checklist.html, every Internet-Draft that + is submitted to the IESG for publication MUST contain an IANA + Considerations section. The requirements for this section vary + depending on what actions are required of the IANA. If there are no + IANA considerations applicable to the document, then the IANA + Considerations section stating that there are no actions is removed + by the RFC Editor before publication. Refer to the guidelines in + [RFC5226] for more details. + +3.5.1. Documents that Create a New Namespace + + If an Internet-Draft defines a new namespace that is to be + administered by the IANA, then the document MUST include an IANA + Considerations section that specifies how the namespace is to be + administered. + + Specifically, if any YANG module namespace statement value contained + in the document is not already registered with IANA, then a new YANG + Namespace registry entry MUST be requested from the IANA. The YANG + [RFC6020] specification includes the procedure for this purpose in + its IANA Considerations section. + + + + + + + +Bierman Informational [Page 7] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +3.5.2. Documents that Extend an Existing Namespace + + It is possible to extend an existing namespace using a YANG submodule + that belongs to an existing module already administered by IANA. In + this case, the document containing the main module MUST be updated to + use the latest revision of the submodule. + +3.6. Reference Sections + + For every import or include statement that appears in a module + contained in the specification, which identifies a module in a + separate document, a corresponding normative reference to that + document MUST appear in the Normative References section. The + reference MUST correspond to the specific module version actually + used within the specification. + + For every normative reference statement that appears in a module + contained in the specification, which identifies a separate document, + a corresponding normative reference to that document SHOULD appear in + the Normative References section. The reference SHOULD correspond to + the specific document version actually used within the specification. + If the reference statement identifies an informative reference, which + identifies a separate document, a corresponding informative reference + to that document MAY appear in the Informative References section. + +4. YANG Usage Guidelines + + In general, modules in IETF Standards Track specifications MUST + comply with all syntactic and semantic requirements of YANG + [RFC6020]. The guidelines in this section are intended to supplement + the YANG specification, which is intended to define a minimum set of + conformance requirements. + + In order to promote interoperability and establish a set of practices + based on previous experience, the following sections establish usage + guidelines for specific YANG constructs. + + Only guidelines that clarify or restrict the minimum conformance + requirements are included here. + +4.1. Module Naming Conventions + + Modules contained in Standards Track documents SHOULD be named + according to the guidelines in the IANA Considerations section of + [RFC6020]. + + + + + + +Bierman Informational [Page 8] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + A distinctive word or acronym (e.g., protocol name or working group + acronym) SHOULD be used in the module name. If new definitions are + being defined to extend one or more existing modules, then the same + word or acronym should be reused, instead of creating a new one. + + All published module names MUST be unique. For a YANG module + published in an RFC, this uniqueness is guaranteed by IANA. For + unpublished modules, the authors need to check that no other work in + progress is using the same module name. + + Once a module name is published, it MUST NOT be reused, even if the + RFC containing the module is reclassified to 'Historic' status. + +4.2. Identifiers + + Identifiers for all YANG identifiers in published modules MUST be + between 1 and 64 characters in length. These include any construct + specified as an 'identifier-arg-str' token in the ABNF in Section 12 + of [RFC6020]. + +4.3. Defaults + + In general, it is suggested that substatements containing very common + default values SHOULD NOT be present. The following substatements + are commonly used with the default value, which would make the module + difficult to read if used everywhere they are allowed. + + +---------------+---------------+ + | Statement | Default Value | + +---------------+---------------+ + | config | true | + | | | + | mandatory | false | + | | | + | max-elements | unbounded | + | | | + | min-elements | 0 | + | | | + | ordered-by | system | + | | | + | status | current | + | | | + | yin-element | false | + +---------------+---------------+ + + + + + + + +Bierman Informational [Page 9] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +4.4. Conditional Statements + + A module may be conceptually partitioned in several ways, using the + 'if-feature' and/or 'when' statements. + + Data model designers need to carefully consider all modularity + aspects, including the use of YANG conditional statements. + + If a data definition is optional, depending on server support for a + NETCONF protocol capability, then a YANG 'feature' statement SHOULD + be defined to indicate that the NETCONF capability is supported + within the data model. + + If any notification data, or any data definition, for a non- + configuration data node is not mandatory, then the server may or may + not be required to return an instance of this data node. If any + conditional requirements exist for returning the data node in a + notification payload or retrieval request, they MUST be documented + somewhere. For example, a 'when' or 'if-feature' statement could + apply to the data node, or the conditional requirements could be + explained in a 'description' statement within the data node or one of + its ancestors (if any). + +4.5. XPath Usage + + This section describes guidelines for using the XML Path Language + [W3C.REC-xpath-19991116] (XPath) within YANG modules. + + The 'attribute' and 'namespace' axes are not supported in YANG, and + MAY be empty in a NETCONF server implementation. + + The 'position' and 'last' functions SHOULD NOT be used. This applies + to implicit use of the 'position' function as well (e.g., + '//chapter[42]'). A server is only required to maintain the relative + XML document order of all instances of a particular user-ordered list + or leaf-list. The 'position' and 'last' functions MAY be used if + they are evaluated in a context where the context node is a user- + ordered 'list' or 'leaf-list'. + + The 'preceding', and 'following' axes SHOULD NOT be used. These + constructs rely on XML document order within a NETCONF server + configuration database, which may not be supported consistently or + produce reliable results across implementations. Predicate + expressions based on static node properties (e.g., element name or + value, 'ancestor' or 'descendant' axes) SHOULD be used instead. The + 'preceding' and 'following' axes MAY be used if document order is not + relevant to the outcome of the expression (e.g., check for global + uniqueness of a parameter value). + + + +Bierman Informational [Page 10] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + The 'preceding-sibling' and 'following-sibling' axes SHOULD NOT used. + A server is only required to maintain the relative XML document order + of all instances of a particular user-ordered list or leaf-list. The + 'preceding-sibling' and 'following-sibling' axes MAY be used if they + are evaluated in a context where the context node is a user-ordered + 'list' or 'leaf-list'. + + Data nodes that use the 'int64' and 'uint64' built-in type SHOULD NOT + be used within numeric expressions. There are boundary conditions in + which the translation from the YANG 64-bit type to an XPath number + can cause incorrect results. Specifically, an XPath 'double' + precision floating point number cannot represent very large positive + or negative 64-bit numbers because it only provides a total precision + of 53 bits. The 'int64' and 'uint64' data types MAY be used in + numeric expressions if the value can be represented with no more than + 53 bits of precision. + + Data modelers need to be careful not to confuse the YANG value space + and the XPath value space. The data types are not the same in both, + and conversion between YANG and XPath data types SHOULD be considered + carefully. + + Explicit XPath data type conversions MAY be used (e.g., 'string', + 'boolean', or 'number' functions), instead of implicit XPath data + type conversions. + +4.6. Lifecycle Management + + The status statement MUST be present if its value is 'deprecated' or + 'obsolete'. + + The module or submodule name MUST NOT be changed, once the document + containing the module or submodule is published. + + The module namespace URI value MUST NOT be changed, once the document + containing the module is published. + + The revision-date substatement within the imports statement SHOULD be + present if any groupings are used from the external module. + + The revision-date substatement within the include statement SHOULD be + present if any groupings are used from the external submodule. + + If submodules are used, then the document containing the main module + MUST be updated so that the main module revision date is equal or + more recent than the revision date of any submodule that is (directly + or indirectly) included by the main module. + + + + +Bierman Informational [Page 11] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +4.7. Module Header, Meta, and Revision Statements + + For published modules, the namespace MUST be a globally unique URI, + as defined in [RFC3986]. This value is usually assigned by the IANA. + + The organization statement MUST be present. If the module is + contained in a document intended for Standards Track status, then the + organization SHOULD be the IETF working group chartered to write the + document. + + The contact statement MUST be present. If the module is contained in + a document intended for Standards Track status, then the working + group web and mailing information MUST be present, and the main + document author or editor contact information SHOULD be present. If + additional authors or editors exist, their contact information MAY be + present. In addition, the Area Director and other contact + information MAY be present. + + The description statement MUST be present. The appropriate IETF + Trust Copyright text MUST be present, as described in Section 3.1. + + If the module relies on information contained in other documents, + which are not the same documents implied by the import statements + present in the module, then these documents MUST be identified in the + reference statement. + + A revision statement MUST be present for each published version of + the module. The revision statement MUST have a reference + substatement. It MUST identify the published document that contains + the module. Modules are often extracted from their original + documents, and it is useful for developers and operators to know how + to find the original source document in a consistent manner. The + revision statement MAY have a description substatement. + + Each new revision MUST include a revision date that is higher than + any other revision date in the module. The revision date does not + need to be updated if the module contents do not change in the new + document revision. + + It is acceptable to reuse the same revision statement within + unpublished versions (i.e., Internet-Drafts), but the revision date + MUST be updated to a higher value each time the Internet-Draft is re- + posted. + + + + + + + + +Bierman Informational [Page 12] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +4.8. Namespace Assignments + + It is RECOMMENDED that only valid YANG modules be included in + documents, whether or not they are published yet. This allows: + + o the module to compile correctly instead of generating disruptive + fatal errors. + + o early implementors to use the modules without picking a random + value for the XML namespace. + + o early interoperability testing since independent implementations + will use the same XML namespace value. + + Until a URI is assigned by the IANA, a proposed namespace URI MUST be + provided for the namespace statement in a YANG module. A value + SHOULD be selected that is not likely to collide with other YANG + namespaces. Standard module names, prefixes, and URI strings already + listed in the YANG Module Registry MUST NOT be used. + + A standard namespace statement value SHOULD have the following form: + + : + + The following URN prefix string SHOULD be used for published and + unpublished YANG modules: + + urn:ietf:params:xml:ns:yang: + + The following example URNs would be valid temporary namespace + statement values for Standards Track modules: + + urn:ietf:params:xml:ns:yang:ietf-netconf-partial-lock + + urn:ietf:params:xml:ns:yang:ietf-netconf-state + + urn:ietf:params:xml:ns:yang:ietf-netconf + + Note that a different URN prefix string SHOULD be used for non- + Standards-Track modules. The string SHOULD be selected according to + the guidelines in [RFC6020]. + + The following examples of non-Standards-Track modules are only + suggestions. There are no guidelines for this type of URN in this + document: + + + + + + +Bierman Informational [Page 13] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + http://example.com/ns/example-interfaces + + http://example.com/ns/example-system + +4.9. Top-Level Data Definitions + + There SHOULD only be one top-level data node defined in each YANG + module, if any data nodes are defined at all. + + The top-level data organization SHOULD be considered carefully, in + advance. Data model designers need to consider how the functionality + for a given protocol or protocol family will grow over time. + + The names and data organization SHOULD reflect persistent + information, such as the name of a protocol. The name of the working + group SHOULD NOT be used because this may change over time. + + A mandatory database data definition is defined as a node that a + client must provide for the database to be valid. The server is not + required to provide a value. + + Top-level database data definitions MUST NOT be mandatory. If a + mandatory node appears at the top level, it will immediately cause + the database to be invalid. This can occur when the server boots or + when a module is loaded dynamically at runtime. + +4.10. Data Types + + Selection of an appropriate data type (i.e., built-in type, existing + derived type, or new derived type) is very subjective, and therefore + few requirements can be specified on that subject. + + Data model designers SHOULD use the most appropriate built-in data + type for the particular application. + + If extensibility of enumerated values is required, then the + 'identityref' data type SHOULD be used instead of an enumeration or + other built-in type. + + For string data types, if a machine-readable pattern can be defined + for the desired semantics, then one or more pattern statements SHOULD + be present. + + For string data types, if the length of the string is required to be + bounded in all implementations, then a length statement MUST be + present. + + + + + +Bierman Informational [Page 14] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + For numeric data types, if the values allowed by the intended + semantics are different than those allowed by the unbounded intrinsic + data type (e.g., 'int32'), then a range statement SHOULD be present. + + The signed numeric data types (i.e., 'int8', 'int16', 'int32', and + 'int64') SHOULD NOT be used unless negative values are allowed for + the desired semantics. + + For 'enumeration' or 'bits' data types, the semantics for each 'enum' + or 'bit' SHOULD be documented. A separate description statement + (within each 'enum' or 'bit' statement) SHOULD be present. + +4.11. Reusable Type Definitions + + If an appropriate derived type exists in any standard module, such as + [RFC6021], then it SHOULD be used instead of defining a new derived + type. + + If an appropriate units identifier can be associated with the desired + semantics, then a units statement SHOULD be present. + + If an appropriate default value can be associated with the desired + semantics, then a default statement SHOULD be present. + + If a significant number of derived types are defined, and it is + anticipated that these data types will be reused by multiple modules, + then these derived types SHOULD be contained in a separate module or + submodule, to allow easier reuse without unnecessary coupling. + + The description statement MUST be present. + + If the type definition semantics are defined in an external document + (other than another YANG module indicated by an import statement), + then the reference statement MUST be present. + +4.12. Data Definitions + + The description statement MUST be present in the following YANG + statements: + + o anyxml + + o augment + + o choice + + o container + + + + +Bierman Informational [Page 15] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + o extension + + o feature + + o grouping + + o identity + + o leaf + + o leaf-list + + o list + + o notification + + o rpc + + o typedef + + If the data definition semantics are defined in an external document, + (other than another YANG module indicated by an import statement), + then a reference statement MUST be present. + + The 'anyxml' construct may be useful to represent an HTML banner + containing markup elements, such as '' and '', and MAY be used + in such cases. However, this construct SHOULD NOT be used if other + YANG data node types can be used instead to represent the desired + syntax and semantics. + + If there are referential integrity constraints associated with the + desired semantics that can be represented with XPath, then one or + more 'must' statements SHOULD be present. + + For list and leaf-list data definitions, if the number of possible + instances is required to be bounded for all implementations, then the + max-elements statements SHOULD be present. + + If any 'must' or 'when' statements are used within the data + definition, then the data definition description statement SHOULD + describe the purpose of each one. + + + + + + + + + + +Bierman Informational [Page 16] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +4.13. Operation Definitions + + If the operation semantics are defined in an external document (other + than another YANG module indicated by an import statement), then a + reference statement MUST be present. + + If the operation impacts system behavior in some way, it SHOULD be + mentioned in the description statement. + + If the operation is potentially harmful to system behavior in some + way, it MUST be mentioned in the Security Considerations section of + the document. + +4.14. Notification Definitions + + The description statement MUST be present. + + If the notification semantics are defined in an external document + (other than another YANG module indicated by an import statement), + then a reference statement MUST be present. + +5. IANA Considerations + + This document registers one URI in the IETF XML registry [RFC3688]. + The following registration has been made: + + URI: urn:ietf:params:xml:ns:yang:ietf-template + + Registrant Contact: The NETMOD WG of the IETF. + + XML: N/A, the requested URI is an XML namespace. + + Per this document, the following assignment has been made in the YANG + Module Names Registry for the YANG module template in Appendix B. + + +---------------+-------------------------------------------+ + | Field | Value | + +---------------+-------------------------------------------+ + | Name | ietf-template | + | | | + | Namespace | urn:ietf:params:xml:ns:yang:ietf-template | + | | | + | Prefix | temp | + | | | + | Reference | RFC 6087 | + +---------------+-------------------------------------------+ + + + + + +Bierman Informational [Page 17] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +6. Security Considerations + + This document defines documentation guidelines for NETCONF content + defined with the YANG data modeling language. The guidelines for how + to write a Security Considerations section for a YANG module are + defined in the online document + + http://www.ops.ietf.org/netconf/yang-security-considerations.txt + + This document does not introduce any new or increased security risks + into the management system. + + The following section contains the security considerations template + dated 2010-06-16. Be sure to check the webpage at the URL listed + above in case there is a more recent version available. + + Each specification that defines one or more YANG modules MUST contain + a section that discusses security considerations relevant to those + modules. This section MUST be patterned after the latest approved + template (available at + http://www.ops.ietf.org/netconf/yang-security-considerations.txt). + + In particular, writable data nodes that could be especially + disruptive if abused MUST be explicitly listed by name and the + associated security risks MUST be spelled out. + + Similarly, readable data nodes that contain especially sensitive + information or that raise significant privacy concerns MUST be + explicitly listed by name and the reasons for the sensitivity/privacy + concerns MUST be explained. + + Further, if new RPC operations have been defined, then the security + considerations of each new RPC operation MUST be explained. + + + + + + + + + + + + + + + + + + +Bierman Informational [Page 18] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +6.1. Security Considerations Section Template + + X. Security Considerations + + The YANG module defined in this memo is designed to be accessed + via the NETCONF protocol [RFC4741]. The lowest NETCONF layer is + the secure transport layer and the mandatory-to-implement secure + transport is SSH [RFC4742]. + + -- if you have any writable data nodes (those are all the + -- "config true" nodes, and remember, that is the default) + -- describe their specific sensitivity or vulnerability. + + There are a number of data nodes defined in this YANG module + which are writable/creatable/deletable (i.e., config true, which + is the default). These data nodes may be considered sensitive + or vulnerable in some network environments. Write operations + (e.g., edit-config) to these data nodes without proper protection + can have a negative effect on network operations. These are + the subtrees and data nodes and their sensitivity/vulnerability: + + + + -- for all YANG modules you must evaluate whether any readable data + -- nodes (those are all the "config false" nodes, but also all other + -- nodes, because they can also be read via operations like get or + -- get-config) are sensitive or vulnerable (for instance, if they + -- might reveal customer information or violate personal privacy + -- laws such as those of the European Union if exposed to + -- unauthorized parties) + + Some of the readable data nodes in this YANG module may be + considered sensitive or vulnerable in some network environments. + It is thus important to control read access (e.g., via get, + get-config, or notification) to these data nodes. These are the + subtrees and data nodes and their sensitivity/vulnerability: + + + + -- if your YANG module has defined any rpc operations + -- describe their specific sensitivity or vulnerability. + + Some of the RPC operations in this YANG module may be considered + sensitive or vulnerable in some network environments. It is thus + important to control access to these operations. These are the + operations and their sensitivity/vulnerability: + + + + + +Bierman Informational [Page 19] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +7. Acknowledgments + + The structure and contents of this document are adapted from + Guidelines for MIB Documents [RFC4181], by C. M. Heard. + + The working group thanks Martin Bjorklund and Juergen Schoenwaelder + for their extensive reviews and contributions to this document. + +8. References + +8.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC2223] Postel, J. and J. Reynolds, "Instructions to RFC Authors", + RFC 2223, October 1997. + + [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, + January 2004. + + [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform + Resource Identifier (URI): Generic Syntax", STD 66, + RFC 3986, January 2005. + + [RFC4741] Enns, R., "NETCONF Configuration Protocol", RFC 4741, + December 2006. + + [RFC5378] Bradner, S. and J. Contreras, "Rights Contributors Provide + to the IETF Trust", BCP 78, RFC 5378, November 2008. + + [RFC5741] Daigle, L., Kolkman, O., and IAB, "RFC Streams, Headers, + and Boilerplates", RFC 5741, December 2009. + + [W3C.REC-xpath-19991116] + DeRose, S. and J. Clark, "XML Path Language (XPath) + Version 1.0", World Wide Web Consortium + Recommendation REC-xpath-19991116, November 1999, + . + + [RFC6020] Bjorklund, M., "YANG - A Data Modeling Language for the + Network Configuration Protocol (NETCONF)", RFC 6020, + October 2010. + + [RFC6021] Schoenwaelder, J., "Common YANG Data Types", RFC 6021, + October 2010. + + + + + +Bierman Informational [Page 20] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +8.2. Informative References + + [RFC4181] Heard, C., "Guidelines for Authors and Reviewers of MIB + Documents", BCP 111, RFC 4181, September 2005. + + [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an + IANA Considerations Section in RFCs", BCP 26, RFC 5226, + May 2008. + + [RFC-STYLE] + Braden, R., Ginoza, S., and A. Hagens, "RFC Document + Style", September 2009, + . + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Bierman Informational [Page 21] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +Appendix A. Module Review Checklist + + This section is adapted from RFC 4181. + + The purpose of a YANG module review is to review the YANG module both + for technical correctness and for adherence to IETF documentation + requirements. The following checklist may be helpful when reviewing + an Internet-Draft: + + 1. I-D Boilerplate -- verify that the draft contains the required + Internet-Draft boilerplate (see + http://www.ietf.org/id-info/guidelines.html), including the + appropriate statement to permit publication as an RFC, and that + I-D boilerplate does not contain references or section numbers. + + 2. Abstract -- verify that the abstract does not contain references, + that it does not have a section number, and that its content + follows the guidelines in + http://www.ietf.org/id-info/guidelines.html. + + 3. Copyright Notice -- verify that the draft has the appropriate + text regarding the rights that document contributers provide to + the IETF Trust [RFC5378]. Verify that it contains the full IETF + Trust copyright notice at the beginning of the document. The + IETF Trust Legal Provisions (TLP) can be found at: + + http://trustee.ietf.org/license-info/ + + 4. Security Considerations section -- verify that the draft uses the + latest approved template from the OPS area website (http:// + www.ops.ietf.org/netconf/yang-security-considerations.txt) and + that the guidelines therein have been followed. + + 5. IANA Considerations section -- this section must always be + present. For each module within the document, ensure that the + IANA Considerations section contains entries for the following + IANA registries: + + XML Namespace Registry: Register the YANG module namespace. + + YANG Module Registry: Register the YANG module name, prefix, + namespace, and RFC number, according to the rules specified in + [RFC6020]. + + 6. References -- verify that the references are properly divided + between normative and informative references, that RFC 2119 is + included as a normative reference if the terminology defined + therein is used in the document, that all references required by + + + +Bierman Informational [Page 22] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + the boilerplate are present, that all YANG modules containing + imported items are cited as normative references, and that all + citations point to the most current RFCs unless there is a valid + reason to do otherwise (for example, it is OK to include an + informative reference to a previous version of a specification to + help explain a feature included for backward compatibility). Be + sure citations for all imported modules are present somewhere in + the document text (outside the YANG module). + + 7. License -- verify that the draft contains the Simplified BSD + License in each YANG module or submodule. Some guidelines + related to this requirement are described in Section 3.1. Make + sure that the correct year is used in all copyright dates. Use + the approved text from the latest Trust Legal Provisions (TLP) + document, which can be found at: + + http://trustee.ietf.org/license-info/ + + 8. Other Issues -- check for any issues mentioned in + http://www.ietf.org/id-info/checklist.html that are not covered + elsewhere. + + 9. Technical Content -- review the actual technical content for + compliance with the guidelines in this document. The use of a + YANG module compiler is recommended when checking for syntax + errors. A list of freely available tools and other information + can be found at: + + http://trac.tools.ietf.org/wg/netconf/trac/wiki + + Checking for correct syntax, however, is only part of the job. + It is just as important to actually read the YANG module document + from the point of view of a potential implementor. It is + particularly important to check that description statements are + sufficiently clear and unambiguous to allow interoperable + implementations to be created. + + + + + + + + + + + + + + + +Bierman Informational [Page 23] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +Appendix B. YANG Module Template + + file "ietf-template@2010-05-18.yang" + +module ietf-template { + + // replace this string with a unique namespace URN value + namespace + "urn:ietf:params:xml:ns:yang:ietf-template"; + + // replace this string, and try to pick a unique prefix + prefix "temp"; + + + // import statements here: e.g., + // import ietf-yang-types { prefix yang; } + // import ietf-inet-types { prefix inet; } + + // identify the IETF working group if applicable + organization + "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; + + // update this contact statement with your info + contact + "WG Web: + WG List: + + WG Chair: your-WG-chair + + + Editor: your-name + "; + + + // replace the first sentence in this description statement. + // replace the copyright notice with the most recent + // version, if it has been updated since the publication + // of this document + description + "This module defines a template for other YANG modules. + + Copyright (c) IETF Trust and the persons + identified as authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + + + +Bierman Informational [Page 24] + +RFC 6087 Guidelines for YANG Documents January 2011 + + + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC XXXX; see + the RFC itself for full legal notices."; + + // RFC Ed.: replace XXXX with actual RFC number and remove this note + + reference "RFC XXXX"; + + // RFC Ed.: remove this note + // Note: extracted from RFC 6087 + + + // replace '2010-05-18' with the module publication date + // The format is (year-month-day) + revision "2010-05-18" { + description + "Initial version"; + } + + // extension statements + + // feature statements + + // identity statements + + // typedef statements + + // grouping statements + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + + // DO NOT put deviation statements in a published module + +} + + + + + + + + + +Bierman Informational [Page 25] + +RFC 6087 Guidelines for YANG Documents January 2011 + + +Author's Address + + Andy Bierman + Brocade + + EMail: andy.bierman@brocade.com + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Bierman Informational [Page 26] + -- cgit v1.2.3