From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc8745.txt | 770 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 770 insertions(+) create mode 100644 doc/rfc/rfc8745.txt (limited to 'doc/rfc/rfc8745.txt') diff --git a/doc/rfc/rfc8745.txt b/doc/rfc/rfc8745.txt new file mode 100644 index 0000000..3fcb846 --- /dev/null +++ b/doc/rfc/rfc8745.txt @@ -0,0 +1,770 @@ + + + + +Internet Engineering Task Force (IETF) H. Ananthakrishnan +Request for Comments: 8745 Netflix +Category: Standards Track S. Sivabalan +ISSN: 2070-1721 Cisco + C. Barth + Juniper Networks + I. Minei + Google, Inc + M. Negi + Huawei Technologies + March 2020 + + + Path Computation Element Communication Protocol (PCEP) Extensions for + Associating Working and Protection Label Switched Paths (LSPs) with + Stateful PCE + +Abstract + + An active stateful Path Computation Element (PCE) is capable of + computing as well as controlling via Path Computation Element + Communication Protocol (PCEP) Multiprotocol Label Switching Traffic + Engineering (MPLS-TE) Label Switched Paths (LSPs). Furthermore, it + is also possible for an active stateful PCE to create, maintain, and + delete LSPs. This document defines the PCEP extension to associate + two or more LSPs to provide end-to-end path protection. + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 7841. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + https://www.rfc-editor.org/info/rfc8745. + +Copyright Notice + + Copyright (c) 2020 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (https://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. + +Table of Contents + + 1. Introduction + 1.1. Requirements Language + 2. Terminology + 3. PCEP Extensions + 3.1. Path Protection Association Type + 3.2. Path Protection Association TLV + 4. Operation + 4.1. State Synchronization + 4.2. PCC-Initiated LSPs + 4.3. PCE-Initiated LSPs + 4.4. Session Termination + 4.5. Error Handling + 5. Other Considerations + 6. IANA Considerations + 6.1. Association Type + 6.2. Path Protection Association TLV + 6.3. PCEP Errors + 7. Security Considerations + 8. Manageability Considerations + 8.1. Control of Function and Policy + 8.2. Information and Data Models + 8.3. Liveness Detection and Monitoring + 8.4. Verify Correct Operations + 8.5. Requirements on Other Protocols + 8.6. Impact on Network Operations + 9. References + 9.1. Normative References + 9.2. Informative References + Acknowledgments + Contributors + Authors' Addresses + +1. Introduction + + [RFC5440] describes Path Computation Element Communication Protocol + (PCEP) for communication between a Path Computation Client (PCC) and + a PCE or between a pair of PCEs as per [RFC4655]. A PCE computes + paths for MPLS-TE Label Switched Paths (LSPs) based on various + constraints and optimization criteria. + + Stateful PCE [RFC8231] specifies a set of extensions to PCEP to + enable stateful control of paths such as MPLS-TE LSPs between and + across PCEP sessions in compliance with [RFC4657]. It includes + mechanisms to affect LSP state synchronization between PCCs and PCEs, + delegation of control of LSPs to PCEs, and PCE control of timing and + sequence of path computations within and across PCEP sessions. The + focus is on a model where LSPs are configured on the PCC, and control + over them is delegated to the stateful PCE. Furthermore, [RFC8281] + specifies a mechanism to dynamically instantiate LSPs on a PCC based + on the requests from a stateful PCE or a controller using stateful + PCE. + + Path protection [RFC4427] refers to a paradigm in which the working + LSP is protected by one or more protection LSP(s). When the working + LSP fails, protection LSP(s) is/are activated. When the working LSPs + are computed and controlled by the PCE, there is benefit in a mode of + operation where protection LSPs are also computed and controlled by + the same PCE. [RFC8051] describes the applicability of path + protection in PCE deployments. + + This document specifies a stateful PCEP extension to associate two or + more LSPs for the purpose of setting up path protection. The + extension defined in this document covers the following scenarios: + + * A PCC initiates a protection LSP and retains the control of the + LSP. The PCC computes the path itself or makes a request for path + computation to a PCE. After the path setup, it reports the + information and state of the path to the PCE. This includes the + association group identifying the working and protection LSPs. + This is the passive stateful mode [RFC8051]. + + * A PCC initiates a protection LSP and delegates the control of the + LSP to a stateful PCE. During delegation, the association group + identifying the working and protection LSPs is included. The PCE + computes the path for the protection LSP and updates the PCC with + the information about the path as long as it controls the LSP. + This is the active stateful mode [RFC8051]. + + * A protection LSP could be initiated by a stateful PCE, which + retains the control of the LSP. The PCE is responsible for + computing the path of the LSP and updating to the PCC with the + information about the path. This is the PCE-Initiated mode + [RFC8281]. + + Note that a protection LSP can be established (signaled) before the + failure (in which case the LSP is said to be either in standby mode + [RFC4427] or a primary LSP [RFC4872]) or after failure of the + corresponding working LSP (known as a secondary LSP [RFC4872]). + Whether to establish it before or after failure is according to + operator choice or policy. + + [RFC8697] introduces a generic mechanism to create a grouping of + LSPs, which can then be used to define associations between a set of + LSPs. The mechanism is equally applicable to stateful PCE (active + and passive modes) and stateless PCE. + + This document specifies a PCEP extension to associate one working LSP + with one or more protection LSPs using the generic association + mechanism. + + This document describes a PCEP extension to associate protection LSPs + by creating the Path Protection Association Group (PPAG) and encoding + this association in PCEP messages for stateful PCEP sessions. + +1.1. Requirements Language + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and + "OPTIONAL" in this document are to be interpreted as described in + BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all + capitals, as shown here. + +2. Terminology + + The following terms are used in this document: + + ERO: Explicit Route Object + + LSP: Label Switched Path + + PCC: Path Computation Client + + PCE: Path Computation Element + + PCEP: Path Computation Element Communication Protocol + + PPAG: Path Protection Association Group + + TLV: Type, Length, and Value + +3. PCEP Extensions + +3.1. Path Protection Association Type + + As per [RFC8697], LSPs are not associated by listing the other LSPs + with which they interact but, rather, by making them belong to an + association group. All LSPs join an association group individually. + The generic ASSOCIATION object is used to associate two or more LSPs + as specified in [RFC8697]. This document defines a new Association + type called "Path Protection Association Type" of value 1 and a "Path + Protection Association Group" (PPAG). A member LSP of a PPAG can + take the role of working or protection LSP. A PPAG can have one + working LSP and/or one or more protection LSPs. The source, + destination, Tunnel ID (as carried in LSP-IDENTIFIERS TLV [RFC8231], + with description as per [RFC3209]), and Protection Type (PT) (in Path + Protection Association TLV) of all LSPs within a PPAG MUST be the + same. As per [RFC3209], a TE tunnel is used to associate a set of + LSPs during reroute or to spread a traffic trunk over multiple paths. + + The format of the ASSOCIATION object used for PPAG is specified in + [RFC8697]. + + [RFC8697] specifies the mechanism for the capability advertisement of + the Association types supported by a PCEP speaker by defining an + ASSOC-Type-List TLV to be carried within an OPEN object. This + capability exchange for the Association type described in this + document (i.e., Path Protection Association Type) MAY be done before + using this association, i.e., the PCEP speaker MAY include the Path + Protection Association Type (1) in the ASSOC-Type-List TLV before + using the PPAG in the PCEP messages. + + This Association type is dynamic in nature and created by the PCC or + PCE for the LSPs belonging to the same TE tunnel (as described in + [RFC3209]) originating at the same head node and terminating at the + same destination. These associations are conveyed via PCEP messages + to the PCEP peer. As per [RFC8697], the association source is set to + the local PCEP speaker address that created the association unless + local policy dictates otherwise. Operator-configured Association + Range MUST NOT be set for this Association type and MUST be ignored. + +3.2. Path Protection Association TLV + + The Path Protection Association TLV is an optional TLV for use in the + ASSOCIATION object with the Path Protection Association Type. The + Path Protection Association TLV MUST NOT be present more than once. + If it appears more than once, only the first occurrence is processed + and any others MUST be ignored. + + The Path Protection Association TLV follows the PCEP TLV format of + [RFC5440]. + + The Type (16 bits) of the TLV is 38. The Length field (16 bits) has + a fixed value of 4. + + The value is comprised of a single field, the Path Protection + Association Flags (32 bits), where each bit represents a flag option. + + The format of the Path Protection Association TLV (Figure 1) is as + follows: + + 0 1 2 3 + 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Type = 38 | Length = 4 | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | PT | Unassigned Flags |S|P| + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + Figure 1: Path Protection Association TLV Format + + Path Protection Association Flags (32 bits) + + The following flags are currently defined: + + * Protecting (P): 1 bit - This bit is as defined in Section 14.1 of + [RFC4872] to indicate if the LSP is a working (0) or protection + (1) LSP. + + * Secondary (S): 1 bit - This bit is as defined in Section 14.1 of + [RFC4872] to indicate if the LSP is a primary (0) or secondary (1) + LSP. The S flag is ignored if the P flag is not set. + + * Protection Type (PT): 6 bits - This field is as defined in + Section 14.1 of [RFC4872] (as "LSP (Protection Type) Flags") to + indicate the LSP protection type in use. Any type already defined + or that could be defined in the future for use in the RSVP-TE + PROTECTION object is acceptable in this TLV unless explicitly + stated otherwise. + + * Unassigned bits are considered reserved. They MUST be set to 0 on + transmission and MUST be ignored on receipt. + + If the TLV is missing in the PPAG ASSOCIATION object, it is + considered that the LSP is a working LSP (i.e., as if the P bit is + unset). + +4. Operation + + An LSP is associated with other LSPs with which it interacts by + adding them to a common association group via the ASSOCIATION object. + All procedures and error handling for the ASSOCIATION object is as + per [RFC8697]. + +4.1. State Synchronization + + During state synchronization, a PCC reports all the existing LSP + states as described in [RFC8231]. The association group membership + pertaining to an LSP is also reported as per [RFC8697]. This + includes PPAGs. + +4.2. PCC-Initiated LSPs + + A PCC can associate a set of LSPs under its control for path + protection purposes. Similarly, the PCC can remove one or more LSPs + under its control from the corresponding PPAG. In both cases, the + PCC reports the change in association to PCE(s) via a Path + Computation Report (PCRpt) message. A PCC can also delegate the + working and protection LSPs to an active stateful PCE, where the PCE + would control the LSPs. The stateful PCE could update the paths and + attributes of the LSPs in the association group via a Path + Computation Update (PCUpd) message. A PCE could also update the + association to the PCC via a PCUpd message. These procedures are + described in [RFC8697]. + + It is expected that both working and protection LSPs are delegated + together (and to the same PCE) to avoid any race conditions. Refer + to [STATE-PCE-SYNC] for the problem description. + +4.3. PCE-Initiated LSPs + + A PCE can create/update working and protection LSPs independently. + As specified in [RFC8697], Association Groups can be created by both + the PCE and the PCC. Furthermore, a PCE can remove a protection LSP + from a PPAG as specified in [RFC8697]. The PCE uses PCUpd or Path + Computation Initiate (PCInitiate) messages to communicate the + association information to the PCC. + +4.4. Session Termination + + As per [RFC8697], the association information is cleared along with + the LSP state information. When a PCEP session is terminated, after + expiry of State Timeout Interval at the PCC, the LSP state associated + with that PCEP session is reverted to operator-defined default + parameters or behaviors as per [RFC8231]. The same procedure is also + followed for the association information. On session termination at + the PCE, when the LSP state reported by PCC is cleared, the + association information is also cleared as per [RFC8697]. Where + there are no LSPs in an association group, the association is + considered to be deleted. + +4.5. Error Handling + + As per the processing rules specified in Section 6.4 of [RFC8697], if + a PCEP speaker does not support this Path Protection Association + Type, it would return a PCErr message with Error-Type 26 "Association + Error" and Error-Value 1 "Association type is not supported". + + All LSPs (working or protection) within a PPAG MUST belong to the + same TE tunnel (as described in [RFC3209]) and have the same source + and destination. If a PCEP speaker attempts to add or update an LSP + to a PPAG and the Tunnel ID (as carried in the LSP-IDENTIFIERS TLV + [RFC8231], with a description as per [RFC3209]) or source or + destination of the LSP is different from the LSP(s) in the PPAG, the + PCEP speaker MUST send PCErr with Error-Type 26 (Association Error) + [RFC8697] and Error-Value 9 (Tunnel ID or endpoints mismatch for Path + Protection Association). In case of Path Protection, an LSP- + IDENTIFIERS TLV SHOULD be included for all LSPs (including Segment + Routing (SR) [RFC8664]). If the Protection Type (PT) (in the Path + Protection Association TLV) is different from the LSPs in the PPAG, + the PCEP speaker MUST send PCErr with Error-Type 26 (Association + Error) [RFC8697] and Error-Value 6 (Association information mismatch) + as per [RFC8697]. + + When the PCEP peer does not support the protection type set in PPAG, + the PCEP peer MUST send PCErr with Error-Type 26 (Association Error) + [RFC8697] and Error-Value 11 (Protection type is not supported). + + A given LSP MAY belong to more than one PPAG. If there is a conflict + between any of the two PPAGs, the PCEP peer MUST send PCErr with + Error-Type 26 (Association Error) [RFC8697] and Error-Value 6 + (Association information mismatch) as per [RFC8697]. + + When the protection type is set to 1+1 (i.e., protection type=0x08 or + 0x10), there MUST be at maximum only one working LSP and one + protection LSP within a PPAG. If a PCEP speaker attempts to add + another working/protection LSP, the PCEP peer MUST send PCErr with + Error-Type 26 (Association Error) [RFC8697] and Error-Value 10 + (Attempt to add another working/protection LSP for Path Protection + Association). + + When the protection type is set to 1:N (i.e., protection type=0x04), + there MUST be at maximum only one protection LSP, and the number of + working LSPs MUST NOT be more than N within a PPAG. If a PCEP + speaker attempts to add another working/protection LSP, the PCEP peer + MUST send PCErr with Error-Type 26 (Association Error) [RFC8697] and + Error-Value 10 (Attempt to add another working/protection LSP for + Path Protection Association). + + During the make-before-break (MBB) procedure, two paths will briefly + coexist. The error handling related to the number of LSPs allowed in + a PPAG MUST NOT be applied during MBB. + + All processing as per [RFC8697] continues to apply. + +5. Other Considerations + + The working and protection LSPs are typically resource disjoint + (e.g., node, Shared Risk Link Group [SRLG] disjoint). This ensures + that a single failure will not affect both the working and protection + LSPs. The disjoint requirement for a group of LSPs is handled via + another Association type called "Disjointness Association" as + described in [PCEP-LSP-EXT]. The diversity requirements for the + protection LSP are also handled by including both ASSOCIATION objects + identifying both the protection association group and the disjoint + association group for the group of LSPs. The relationship between + the Synchronization VECtor (SVEC) object and the Disjointness + Association is described in Section 5.4 of [PCEP-LSP-EXT]. + + [RFC4872] introduces the concept and mechanisms to support the + association of one LSP to another LSP across different RSVP Traffic + Engineering (RSVP-TE) sessions using the ASSOCIATION and PROTECTION + object. The information in the Path Protection Association TLV in + PCEP as received from the PCE is used to trigger the signaling of the + working LSP and protection LSP, with the Path Protection Association + Flags mapped to the corresponding fields in the PROTECTION object in + RSVP-TE. + +6. IANA Considerations + +6.1. Association Type + + This document defines a new Association type, originally defined in + [RFC8697], for path protection. IANA has assigned new value in the + "ASSOCIATION Type Field" subregistry (created by [RFC8697]) as + follows: + + +------+-----------------------------+-----------+ + | Type | Name | Reference | + +======+=============================+===========+ + | 1 | Path Protection Association | RFC 8745 | + +------+-----------------------------+-----------+ + + Table 1: ASSOCIATION Type Field + +6.2. Path Protection Association TLV + + This document defines a new TLV for carrying the additional + information of LSPs within a path protection association group. IANA + has assigned a new value in the "PCEP TLV Type Indicators" + subregistry as follows: + + +-------+---------------------------------------+-----------+ + | Value | Description | Reference | + +=======+=======================================+===========+ + | 38 | Path Protection Association Group TLV | RFC 8745 | + +-------+---------------------------------------+-----------+ + + Table 2: PCEP TLV Type Indicators + + Per this document, a new subregistry named "Path protection + Association Group TLV Flag Field" has been created within the "Path + Computation Element Protocol (PCEP) Numbers" registry to manage the + Flag field in the Path Protection Association Group TLV. New values + are to be assigned by Standards Action [RFC8126]. Each bit should be + tracked with the following qualities: + + * Bit number (count from 0 as the most significant bit) + + * Name of the flag + + * Reference + + +------+-----------------------+-----------+ + | Bit | Name | Reference | + +======+=======================+===========+ + | 31 | P - PROTECTION-LSP | RFC 8745 | + +------+-----------------------+-----------+ + | 30 | S - SECONDARY-LSP | RFC 8745 | + +------+-----------------------+-----------+ + | 6-29 | Unassigned | RFC 8745 | + +------+-----------------------+-----------+ + | 0-5 | Protection Type Flags | RFC 8745 | + +------+-----------------------+-----------+ + + Table 3: Path Protection Association + Group TLV Flag Field + +6.3. PCEP Errors + + This document defines new Error-Values related to path protection + association for Error-type 26 "Association Error" defined in + [RFC8697]. IANA has allocated new error values within the "PCEP- + ERROR Object Error Types and Values" subregistry of the PCEP Numbers + registry as follows: + + +------------+-------------+---------------------------+-----------+ + | Error-Type | Meaning | Error-value | Reference | + +============+=============+===========================+===========+ + | 26 | Association | | [RFC8697] | + | | Error | | | + +------------+-------------+---------------------------+-----------+ + | | | 9: Tunnel ID or endpoints | RFC 8745 | + | | | mismatch for Path | | + | | | Protection Association | | + +------------+-------------+---------------------------+-----------+ + | | | 10: Attempt to add | RFC 8745 | + | | | another working/ | | + | | | protection LSP for Path | | + | | | Protection Association | | + +------------+-------------+---------------------------+-----------+ + | | | 11: Protection type is | RFC 8745 | + | | | not supported | | + +------------+-------------+---------------------------+-----------+ + + Table 4: PCEP-ERROR Object Error Types and Values + +7. Security Considerations + + The security considerations described in [RFC8231], [RFC8281], and + [RFC5440] apply to the extensions described in this document as well. + Additional considerations related to associations where a malicious + PCEP speaker could be spoofed and could be used as an attack vector + by creating associations are described in [RFC8697]. Adding a + spurious protection LSP to the Path Protection Association group + could give a false sense of network reliability, which leads to + issues when the working LSP is down and the protection LSP fails as + well. Thus, securing the PCEP session using Transport Layer Security + (TLS) [RFC8253], as per the recommendations and best current + practices in BCP 195 [RFC7525], is RECOMMENDED. + +8. Manageability Considerations + +8.1. Control of Function and Policy + + Mechanisms defined in this document do not imply any control or + policy requirements in addition to those already listed in [RFC5440], + [RFC8231], and [RFC8281]. + +8.2. Information and Data Models + + [RFC7420] describes the PCEP MIB; there are no new MIB Objects for + this document. + + The PCEP YANG module [PCEP-YANG] supports associations. + +8.3. Liveness Detection and Monitoring + + Mechanisms defined in this document do not imply any new liveness + detection and monitoring requirements in addition to those already + listed in [RFC5440], [RFC8231], and [RFC8281]. + +8.4. Verify Correct Operations + + Mechanisms defined in this document do not imply any new operation + verification requirements in addition to those already listed in + [RFC5440], [RFC8231], and [RFC8281]. + +8.5. Requirements on Other Protocols + + Mechanisms defined in this document do not imply any new requirements + on other protocols. + +8.6. Impact on Network Operations + + Mechanisms defined in this document do not have any impact on network + operations in addition to those already listed in [RFC5440], + [RFC8231], and [RFC8281]. + +9. References + +9.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, + DOI 10.17487/RFC2119, March 1997, + . + + [RFC3209] Awduche, D., Berger, L., Gan, D., Li, T., Srinivasan, V., + and G. Swallow, "RSVP-TE: Extensions to RSVP for LSP + Tunnels", RFC 3209, DOI 10.17487/RFC3209, December 2001, + . + + [RFC4872] Lang, J.P., Ed., Rekhter, Y., Ed., and D. Papadimitriou, + Ed., "RSVP-TE Extensions in Support of End-to-End + Generalized Multi-Protocol Label Switching (GMPLS) + Recovery", RFC 4872, DOI 10.17487/RFC4872, May 2007, + . + + [RFC5440] Vasseur, JP., Ed. and JL. Le Roux, Ed., "Path Computation + Element (PCE) Communication Protocol (PCEP)", RFC 5440, + DOI 10.17487/RFC5440, March 2009, + . + + [RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre, + "Recommendations for Secure Use of Transport Layer + Security (TLS) and Datagram Transport Layer Security + (DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May + 2015, . + + [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for + Writing an IANA Considerations Section in RFCs", BCP 26, + RFC 8126, DOI 10.17487/RFC8126, June 2017, + . + + [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC + 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, + May 2017, . + + [RFC8231] Crabbe, E., Minei, I., Medved, J., and R. Varga, "Path + Computation Element Communication Protocol (PCEP) + Extensions for Stateful PCE", RFC 8231, + DOI 10.17487/RFC8231, September 2017, + . + + [RFC8253] Lopez, D., Gonzalez de Dios, O., Wu, Q., and D. Dhody, + "PCEPS: Usage of TLS to Provide a Secure Transport for the + Path Computation Element Communication Protocol (PCEP)", + RFC 8253, DOI 10.17487/RFC8253, October 2017, + . + + [RFC8281] Crabbe, E., Minei, I., Sivabalan, S., and R. Varga, "Path + Computation Element Communication Protocol (PCEP) + Extensions for PCE-Initiated LSP Setup in a Stateful PCE + Model", RFC 8281, DOI 10.17487/RFC8281, December 2017, + . + + [RFC8697] Minei, I., Crabbe, E., Sivabalan, S., Ananthakrishnan, H., + Dhody, D., and Y. Tanaka, "Path Computation Element + Communication Protocol (PCEP) Extensions for Establishing + Relationships between Sets of Label Switched Paths + (LSPs)", RFC 8697, DOI 10.17487/RFC8697, January 2020, + . + +9.2. Informative References + + [PCEP-LSP-EXT] + Litkowski, S., Sivabalan, S., Barth, C., and M. Negi, + "Path Computation Element Communication Protocol (PCEP) + Extension for LSP Diversity Constraint Signaling", Work in + Progress, Internet-Draft, draft-ietf-pce-association- + diversity-14, 26 January 2020, + . + + [PCEP-YANG] + Dhody, D., Hardwick, J., Beeram, V., and J. Tantsura, "A + YANG Data Model for Path Computation Element + Communications Protocol (PCEP)", Work in Progress, + Internet-Draft, draft-ietf-pce-pcep-yang-13, 31 October + 2019, + . + + [RFC4427] Mannie, E., Ed. and D. Papadimitriou, Ed., "Recovery + (Protection and Restoration) Terminology for Generalized + Multi-Protocol Label Switching (GMPLS)", RFC 4427, + DOI 10.17487/RFC4427, March 2006, + . + + [RFC4655] Farrel, A., Vasseur, J.-P., and J. Ash, "A Path + Computation Element (PCE)-Based Architecture", RFC 4655, + DOI 10.17487/RFC4655, August 2006, + . + + [RFC4657] Ash, J., Ed. and J.L. Le Roux, Ed., "Path Computation + Element (PCE) Communication Protocol Generic + Requirements", RFC 4657, DOI 10.17487/RFC4657, September + 2006, . + + [RFC7420] Koushik, A., Stephan, E., Zhao, Q., King, D., and J. + Hardwick, "Path Computation Element Communication Protocol + (PCEP) Management Information Base (MIB) Module", + RFC 7420, DOI 10.17487/RFC7420, December 2014, + . + + [RFC8051] Zhang, X., Ed. and I. Minei, Ed., "Applicability of a + Stateful Path Computation Element (PCE)", RFC 8051, + DOI 10.17487/RFC8051, January 2017, + . + + [RFC8664] Sivabalan, S., Filsfils, C., Tantsura, J., Henderickx, W., + and J. Hardwick, "Path Computation Element Communication + Protocol (PCEP) Extensions for Segment Routing", RFC 8664, + DOI 10.17487/RFC8664, December 2019, + . + + [STATE-PCE-SYNC] + Litkowski, S., Sivabalan, S., Li, C., and H. Zheng, "Inter + Stateful Path Computation Element (PCE) Communication + Procedures.", Work in Progress, Internet-Draft, draft- + litkowski-pce-state-sync-07, 11 January 2020, + . + +Acknowledgments + + We would like to thank Jeff Tantsura, Xian Zhang, and Greg Mirsky for + their contributions to this document. + + Thanks to Ines Robles for the RTGDIR review. + + Thanks to Pete Resnick for the GENART review. + + Thanks to Donald Eastlake for the SECDIR review. + + Thanks to Barry Leiba, Benjamin Kaduk, Éric Vyncke, and Roman Danyliw + for the IESG review. + +Contributors + + Dhruv Dhody + Huawei Technologies + Divyashree Techno Park, Whitefield + Bangalore 560066 + Karnataka + India + + Email: dhruv.ietf@gmail.com + + + Raveendra Torvi + Juniper Networks + 1194 N Mathilda Ave + Sunnyvale, CA 94086 + United States of America + + Email: rtorvi@juniper.net + + + Edward Crabbe + Individual Contributor + + Email: edward.crabbe@gmail.com + + +Authors' Addresses + + Hariharan Ananthakrishnan + Netflix + United States of America + + Email: hari@netflix.com + + + Siva Sivabalan + Cisco + 2000 Innovation Drive + Kanata Ontario K2K 3E8 + Canada + + Email: msiva@cisco.com + + + Colby Barth + Juniper Networks + 1194 N Mathilda Ave + Sunnyvale, CA 94086 + United States of America + + Email: cbarth@juniper.net + + + Ina Minei + Google, Inc + 1600 Amphitheatre Parkway + Mountain View, CA 94043 + United States of America + + Email: inaminei@google.com + + + Mahendra Singh Negi + Huawei Technologies + Divyashree Techno Park, Whitefield + Bangalore 560066 + Karnataka + India + + Email: mahend.ietf@gmail.com -- cgit v1.2.3