From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc8927.txt | 2333 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2333 insertions(+) create mode 100644 doc/rfc/rfc8927.txt (limited to 'doc/rfc/rfc8927.txt') diff --git a/doc/rfc/rfc8927.txt b/doc/rfc/rfc8927.txt new file mode 100644 index 0000000..785f6e8 --- /dev/null +++ b/doc/rfc/rfc8927.txt @@ -0,0 +1,2333 @@ + + + + +Independent Submission U. Carion +Request for Comments: 8927 Segment +Category: Experimental November 2020 +ISSN: 2070-1721 + + + JSON Type Definition + +Abstract + + This document proposes a format, called JSON Type Definition (JTD), + for describing the shape of JavaScript Object Notation (JSON) + messages. Its main goals are to enable code generation from schemas + as well as portable validation with standardized error indicators. + To this end, JTD is intentionally limited to be no more expressive + than the type systems of mainstream programming languages. This + intentional limitation, as well as the decision to make JTD schemas + be JSON documents, makes tooling atop of JTD easier to build. + + This document does not have IETF consensus and is presented here to + facilitate experimentation with the concept of JTD. + +Status of This Memo + + This document is not an Internet Standards Track specification; it is + published for examination, experimental implementation, and + evaluation. + + This document defines an Experimental Protocol for the Internet + community. This is a contribution to the RFC Series, independently + of any other RFC stream. The RFC Editor has chosen to publish this + document at its discretion and makes no statement about its value for + implementation or deployment. Documents approved for publication by + the RFC Editor are not candidates for any level of Internet Standard; + see Section 2 of RFC 7841. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + https://www.rfc-editor.org/info/rfc8927. + +Copyright Notice + + Copyright (c) 2020 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (https://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. + +Table of Contents + + 1. Introduction + 1.1. Terminology + 1.2. Scope of Experiment + 2. Syntax + 2.1. Root vs. Non-root Schemas + 2.2. Forms + 2.2.1. Empty + 2.2.2. Ref + 2.2.3. Type + 2.2.4. Enum + 2.2.5. Elements + 2.2.6. Properties + 2.2.7. Values + 2.2.8. Discriminator + 2.3. Extending JTD's Syntax + 3. Semantics + 3.1. Allowing Additional Properties + 3.2. Errors + 3.3. Forms + 3.3.1. Empty + 3.3.2. Ref + 3.3.3. Type + 3.3.4. Enum + 3.3.5. Elements + 3.3.6. Properties + 3.3.7. Values + 3.3.8. Discriminator + 4. IANA Considerations + 5. Security Considerations + 6. References + 6.1. Normative References + 6.2. Informative References + Appendix A. Rationale for Omitted Features + A.1. Support for 64-Bit Numbers + A.2. Support for Non-root Definitions + Appendix B. Comparison with CDDL + Appendix C. Example + Acknowledgments + Author's Address + +1. Introduction + + This document describes a schema language for JSON [RFC8259] called + JSON Type Definition (JTD). + + There exist many options for describing JSON data. JTD's niche is to + focus on enabling code generation from schemas; to this end, JTD's + expressiveness is intentionally limited to be no more powerful than + what can be expressed in the type systems of mainstream programming + languages. + + The goals of JTD are to: + + * Provide an unambiguous description of the overall structure of a + JSON document. + + * Be able to describe common JSON data types and structures (that + is, the data types and structures necessary to support most JSON + documents and that are widely understood in an interoperable way + by JSON implementations). + + * Provide a single format that is readable and editable by both + humans and machines and that can be embedded within other JSON + documents. This makes JTD a convenient format for tooling to + accept as input or produce as output. + + * Enable code generation from JTD schemas. JTD schemas are meant to + be easy to convert into data structures idiomatic to mainstream + programming languages. + + * Provide a standardized format for error indicators when data does + not conform with a schema. + + JTD is intentionally designed as a rather minimal schema language. + Thus, although JTD can describe some categories of JSON, it is not + able to describe its own structure; this document uses Concise Data + Definition Language (CDDL) [RFC8610] to describe JTD's syntax. By + keeping the expressiveness of the schema language minimal, JTD makes + code generation and standardized error indicators easier to + implement. + + Examples in this document use constructs from the C++ programming + language. These examples are provided to aid the reader in + understanding the principles of JTD but are not limiting in any way. + + JTD's feature set is designed to represent common patterns in JSON- + using applications, while still having a clear correspondence to + programming languages in widespread use. Thus, JTD supports: + + * Signed and unsigned 8-, 16-, and 32-bit integers. A tool that + converts JTD schemas into code can use "int8_t", "uint8_t", + "int16_t", etc., or their equivalents in the target language, to + represent these JTD types. + + * A distinction between "float32" and "float64". Code generators + can use "float" and "double", or their equivalents, for these JTD + types. + + * A "properties" form of JSON objects, corresponding to some sort of + struct or record. The "properties" form of JSON objects is akin + to a C++ "struct". + + * A "values" form of JSON objects, corresponding to some sort of + dictionary or associative array. The "values" form of JSON + objects is akin to a C++ "std::map". + + * A "discriminator" form of JSON objects, corresponding to a + discriminated (or "tagged") union. The "discriminator" form of + JSON objects is akin to a C++ "std::variant". + + The principle of common patterns in JSON is why JTD does not support + 64-bit integers, as these are usually transmitted over JSON in non- + interoperable (i.e., ignoring the recommendations in Section 2.2 of + [RFC7493]) or mutually inconsistent ways. Appendix A.1 further + elaborates on why JTD does not support 64-bit integers. + + The principle of clear correspondence to common programming languages + is why JTD does not support, for example, a data type for integers up + to 2**53-1. + + It is expected that for many use cases, a schema language of JTD's + expressiveness is sufficient. Where a more expressive language is + required, alternatives exist in CDDL and others. + + This document does not have IETF consensus and is presented here to + facilitate experimentation with the concept of JTD. The purpose of + the experiment is to gain experience with JTD and to possibly revise + this work accordingly. If JTD is determined to be a valuable and + popular approach, it may be taken to the IETF for further discussion + and revision. + + This document has the following structure. Section 2 defines the + syntax of JTD. Section 3 describes the semantics of JTD; this + includes determining whether some data satisfies a schema and what + error indicators should be produced when the data is unsatisfactory. + Appendix A discusses why certain features are omitted from JTD. + Appendix B presents various JTD schemas and their CDDL equivalents. + +1.1. Terminology + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and + "OPTIONAL" in this document are to be interpreted as described in + BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all + capitals, as shown here. + + The term "JSON Pointer", when it appears in this document, is to be + understood as it is defined in [RFC6901]. + + The terms "object", "member", "array", "number", "name", and "string" + in this document are to be interpreted as described in [RFC8259]. + + The term "instance", when it appears in this document, refers to a + JSON value being validated against a JTD schema. This value can be + an entire JSON document, or it can be a value embedded within a JSON + document. + +1.2. Scope of Experiment + + JTD is an experiment. Participation in this experiment consists of + using JTD to validate or document interchanged JSON messages or + building tooling atop of JTD. Feedback on the results of this + experiment may be emailed to the author. Participants in this + experiment are anticipated to mostly be nodes that provide or consume + JSON-based APIs. + + Nodes know if they are participating in the experiment if they are + validating JSON messages against a JTD schema or if they are relying + on another node to do so. Nodes are also participating in the + experiment if they are running code generated from a JTD schema. + + The risk of this experiment "escaping" takes the form of a JTD- + supporting node expecting another node, which lacks such support, to + validate messages against some JTD schema. In such a case, the + outcome will likely be that the nodes fail to interchange information + correctly. + + This experiment will be deemed successful when JTD has been + implemented by multiple independent parties and these parties + successfully use JTD to facilitate information interchange within + their internal systems or between systems operated by independent + parties. + + If this experiment is deemed successful, and JTD is determined to be + a valuable and popular approach, it may be taken to the IETF for + further discussion and revision. One possible outcome of this + discussion and revision could be that a working group produces a + Standards Track specification of JTD. + + Some implementations of JTD, as well as code generators and other + tooling related to JTD, are available at . + +2. Syntax + + This section describes when a JSON document is a correct JTD schema. + Because Concise Data Definition Language (CDDL) is well suited to the + task of defining complex JSON formats, such as JTD schemas, this + section uses CDDL to describe the format of JTD schemas. + + JTD schemas may recursively contain other schemas. In this document, + a "root schema" is one that is not contained within another schema, + i.e., it is "top level". + + A JTD schema is a JSON object taking on an appropriate form. JTD + schemas may contain "additional data", discussed in Section 2.3. + Root JTD schemas may optionally contain definitions (a mapping from + names to schemas). + + A correct root JTD schema MUST match the "root-schema" CDDL rule + described in this section. A correct non-root JTD schema MUST match + the "schema" CDDL rule described in this section. + + ; root-schema is identical to schema, but additionally allows for + ; definitions. + ; + ; definitions are prohibited from appearing on non-root schemas. + root-schema = { + ? definitions: { * tstr => { schema}}, + schema, + } + ; schema is the main CDDL rule defining a JTD schema. + ; + ; All JTD schemas are JSON objects taking on one of eight forms + ; listed here. + schema = ( + ref // + type // + enum // + elements // + properties // + values // + discriminator // + empty // + ) + ; shared is a CDDL rule containing properties that all eight schema + ; forms share. + shared = ( + ? metadata: { * tstr => any }, + ? nullable: bool, + ) + ; empty describes the "empty" schema form. + empty = shared + ; ref describes the "ref" schema form. + ; + ; There are additional constraints on this form that cannot be + ; expressed in CDDL. Section 2.2.2 describes these additional + ; constraints in detail. + ref = ( ref: tstr, shared ) + ; type describes the "type" schema form. + type = ( + type: "boolean" + / "float32" + / "float64" + / "int8" + / "uint8" + / "int16" + / "uint16" + / "int32" + / "uint32" + / "string" + / "timestamp", + shared, + ) + ; enum describes the "enum" schema form. + ; + ; There are additional constraints on this form that cannot be + ; expressed in CDDL. Section 2.2.4 describes these additional + ; constraints in detail. + enum = ( enum: [+ tstr], shared ) + ; elements describes the "elements" schema form. + elements = ( elements: { schema }, shared ) + ; properties describes the "properties" schema form. + ; + ; This CDDL rule is defined so that a schema of the "properties" form + ; may omit a member named "properties" or a member named + ; "optionalProperties", but not both. + ; + ; There are additional constraints on this form that cannot be + ; expressed in CDDL. Section 2.2.6 describes these additional + ; constraints in detail. + properties = (with-properties // with-optional-properties) + with-properties = ( + properties: { * tstr => { schema }}, + ? optionalProperties: { * tstr => { schema }}, + ? additionalProperties: bool, + shared, + ) + with-optional-properties = ( + ? properties: { * tstr => { schema }}, + optionalProperties: { * tstr => { schema }}, + ? additionalProperties: bool, + shared, + ) + ; values describes the "values" schema form. + values = ( values: { schema }, shared ) + ; discriminator describes the "discriminator" schema form. + ; + ; There are additional constraints on this form that cannot be + ; expressed in CDDL. Section 2.2.8 describes these additional + ; constraints in detail. + discriminator = ( + discriminator: tstr, + ; Note well: this rule is defined in terms of the "properties" + ; CDDL rule, not the "schema" CDDL rule. + mapping: { * tstr => { properties } } + shared, + ) + + Figure 1: CDDL Definition of a Schema + + The remainder of this section will describe constraints on JTD + schemas that cannot be expressed in CDDL. It will also provide + examples of valid and invalid JTD schemas. + +2.1. Root vs. Non-root Schemas + + The "root-schema" rule in Figure 1 permits a member named + "definitions", but the "schema" rule does not permit for such a + member. This means that only root (i.e., "top-level") JTD schemas + can have a "definitions" object, and subschemas may not. + + Thus, + + { "definitions": {} } + + is a correct JTD schema, but + + { + "definitions": { + "foo": { + "definitions": {} + } + } + } + + is not, because subschemas (such as the object at "/definitions/foo") + must not have a member named "definitions". + +2.2. Forms + + JTD schemas (i.e., JSON objects satisfying the "schema" CDDL rule in + Figure 1) must take on one of eight forms. These forms are defined + so as to be mutually exclusive; a schema cannot satisfy multiple + forms at once. + +2.2.1. Empty + + The "empty" form is defined by the "empty" CDDL rule in Figure 1. + The semantics of the "empty" form are described in Section 3.3.1. + + Despite the name "empty", schemas of the "empty" form are not + necessarily empty JSON objects. Like schemas of any of the eight + forms, schemas of the "empty" form may contain members named + "nullable" (whose value must be "true" or "false") or "metadata" + (whose value must be an object) or both. + + Thus, + + {} + + and + + { "nullable": true } + + and + + { "nullable": true, "metadata": { "foo": "bar" }} + + are correct JTD schemas of the "empty" form, but + + { "nullable": "foo" } + + is not, because the value of the member named "nullable" must be + "true" or "false". + +2.2.2. Ref + + The "ref" form is defined by the "ref" CDDL rule in Figure 1. The + semantics of the "ref" form are described in Section 3.3.2. + + For a schema of the "ref" form to be correct, the value of the member + named "ref" must refer to one of the definitions found at the root + level of the schema it appears in. More formally, for a schema _S_ + of the "ref" form: + + * Let _B_ be the root schema containing the schema or the schema + itself if it is a root schema. + + * Let _R_ be the value of the member of _S_ with the name "ref". + + If the schema is correct, then _B_ MUST have a member _D_ with the + name "definitions", and _D_ MUST contain a member whose name equals + _R_. + + Thus, + + { + "definitions": { + "coordinates": { + "properties": { + "lat": { "type": "float32" }, + "lng": { "type": "float32" } + } + } + }, + "properties": { + "user_location": { "ref": "coordinates" }, + "server_location": { "ref": "coordinates" } + } + } + + is a correct JTD schema and demonstrates the point of the "ref" form: + to avoid redefining the same thing twice. However, + + { "ref": "foo" } + + is not a correct JTD schema, as there are no top-level "definitions", + and so the "ref" form cannot be correct. Similarly, + + { "definitions": { "foo": {}}, "ref": "bar" } + + is not a correct JTD schema, as there is no member named "bar" in the + top-level "definitions". + +2.2.3. Type + + The "type" form is defined by the "type" CDDL rule in Figure 1. The + semantics of the "type" form are described in Section 3.3.3. + + As an example of a correct JTD schema of the "type" form, + + { "type": "uint8" } + + is a correct JTD schema, whereas + + { "type": true } + + and + + { "type": "foo" } + + are not correct schemas, as neither "true" nor the JSON string "foo" + are in the list of permitted values of the "type" member described in + the "type" CDDL rule in Figure 1. + +2.2.4. Enum + + The "enum" form is defined by the "enum" CDDL rule in Figure 1. The + semantics of the "enum" form are described in Section 3.3.4. + + For a schema of the "enum" form to be correct, the value of the + member named "enum" must be a nonempty array of strings, and that + array must not contain duplicate values. More formally, for a schema + _S_ of the "enum" form: + + * Let _E_ be the value of the member of _S_ with name "enum". + + If the schema is correct, then there MUST NOT exist any pair of + elements of _E_ that encode equal string values, where string + equality is defined as in Section 8.3 of [RFC8259]. + + Thus, + + { "enum": [] } + + is not a correct JTD schema, as the value of the member named "enum" + must be nonempty, and + + { "enum": ["a\\b", "a\u005Cb"] } + + is not a correct JTD schema, as + + "a\\b" + + and + + "a\u005Cb" + + encode strings that are equal by the definition of string equality + given in Section 8.3 of [RFC8259]. By contrast, + + { "enum": ["PENDING", "IN_PROGRESS", "DONE" ]} + + is an example of a correct JTD schema of the "enum" form. + +2.2.5. Elements + + The "elements" form is defined by the "elements" CDDL rule in + Figure 1. The semantics of the "elements" form are described in + Section 3.3.5. + + As an example of a correct JTD schema of the "elements" form, + + { "elements": { "type": "uint8" }} + + is a correct JTD schema, whereas + + { "elements": true } + + and + + { "elements": { "type": "foo" } } + + are not correct schemas, as neither + + true + + nor + + { "type": "foo" } + + are correct JTD schemas, and the value of the member named "elements" + must be a correct JTD schema. + +2.2.6. Properties + + The "properties" form is defined by the "properties" CDDL rule in + Figure 1. The semantics of the "properties" form are described in + Section 3.3.6. + + For a schema of the "properties" form to be correct, properties must + either be required (i.e., in "properties") or optional (i.e., in + "optionalProperties"), but not both. + + More formally, if a schema has both a member named "properties" (with + value _P_) and another member named "optionalProperties" (with value + _O_), then _O_ and _P_ MUST NOT have any member names in common; that + is, no member of _P_ may have a name equal to the name of any member + of _O_, under the definition of string equality given in Section 8.3 + of [RFC8259]. + + Thus, + + { + "properties": { "confusing": {} }, + "optionalProperties": { "confusing": {} } + } + + is not a correct JTD schema, as "confusing" appears in both + "properties" and "optionalProperties". By contrast, + + { + "properties": { + "users": { + "elements": { + "properties": { + "id": { "type": "string" }, + "name": { "type": "string" }, + "create_time": { "type": "timestamp" } + }, + "optionalProperties": { + "delete_time": { "type": "timestamp" } + } + } + }, + "next_page_token": { "type": "string" } + } + } + + is a correct JTD schema of the "properties" form, describing a + paginated list of users and demonstrating the recursive nature of the + syntax of JTD schemas. + +2.2.7. Values + + The "values" form is defined by the "values" CDDL rule in Figure 1. + The semantics of the "values" form are described in Section 3.3.7. + + As an example of a correct JTD schema of the "values" form, + + { "values": { "type": "uint8" }} + + is a correct JTD schema, whereas + + { "values": true } + + and + + { "values": { "type": "foo" } } + + are not correct schemas, as neither + + true + + nor + + { "type": "foo" } + + are correct JTD schemas, and the value of the member named "values" + must be a correct JTD schema. + +2.2.8. Discriminator + + The "discriminator" form is defined by the "discriminator" CDDL rule + in Figure 1. The semantics of the "discriminator" form are described + in Section 3.3.8. Understanding the semantics of the "discriminator" + form will likely aid the reader in understanding why this section + provides constraints on the "discriminator" form beyond those in + Figure 1. + + To prevent ambiguous or unsatisfiable constraints on the + "discriminator" property of a tagged union, an additional constraint + on schemas of the "discriminator" form exists. For schemas of the + "discriminator" form: + + * Let _D_ be the member of the schema with the name "discriminator". + + * Let _M_ be the member of the schema with the name "mapping". + + If the schema is correct, then all member values _S_ of _M_ will be + schemas of the "properties" form. For each _S_: + + * If _S_ has a member _N_ whose name equals "nullable", _N_'s value + MUST NOT be the JSON primitive value "true". + + * For each member _P_ of _S_ whose name equals "properties" or + "optionalProperties", _P_'s value, which must be an object, MUST + NOT contain any members whose name equals _D_'s value. + + Thus, + + { + "discriminator": "event_type", + "mapping": { + "can_the_object_be_null_or_not?": { + "nullable": true, + "properties": { "foo": { "type": "string" } }} + } + } + } + + is an incorrect schema, as a member of "mapping" has a member named + "nullable" whose value is "true". This would suggest that the + instance may be null. Yet, the top-level schema lacks such a + "nullable" set to "true", which would suggest that the instance in + fact cannot be null. If this were a correct JTD schema, it would be + unclear which piece of information takes precedence. + + JTD handles such possible ambiguity by disallowing, at the syntactic + level, the possibility of contradictory specifications of whether an + instance described by a schema of the "discriminator" form may be + null. The schemas in a discriminator "mapping" cannot have + "nullable" set to "true"; only the discriminator itself can use + "nullable" in this way. + + It also follows that + + { + "discriminator": "event_type", + "mapping": { + "is_event_type_a_string_or_a_float32?": { + "properties": { "event_type": { "type": "float32" }} + } + } + } + + and + + { + "discriminator": "event_type", + "mapping": { + "is_event_type_a_string_or_an_optional_float32?": { + "optionalProperties": { "event_type": { "type": "float32" }} + } + } + } + + are incorrect schemas, as "event_type" is both the value of + "discriminator" and a member name in one of the "mapping" member + "properties" or "optionalProperties". This is ambiguous, because + ordinarily the "discriminator" keyword would indicate that + "event_type" is expected to be a string, but another part of the + schema specifies that "event_type" is expected to be a number. + + JTD handles such possible ambiguity by disallowing, at the syntactic + level, the possibility of contradictory specifications of + discriminator "tags". Discriminator "tags" cannot be redefined in + other parts of the schema. + + By contrast, + + { + "discriminator": "event_type", + "mapping": { + "account_deleted": { + "properties": { + "account_id": { "type": "string" } + } + }, + "account_payment_plan_changed": { + "properties": { + "account_id": { "type": "string" }, + "payment_plan": { "enum": ["FREE", "PAID"] } + }, + "optionalProperties": { + "upgraded_by": { "type": "string" } + } + } + } + } + + is a correct schema, describing a pattern of data common in JSON- + based messaging systems. Section 3.3.8 provides examples of what + this schema accepts and rejects. + +2.3. Extending JTD's Syntax + + This document does not describe any extension mechanisms for JTD + schema validation, which is described in Section 3. However, schemas + are defined to optionally contain a "metadata" keyword, whose value + is an arbitrary JSON object. Call the members of this object + "metadata members". + + Users MAY add metadata members to JTD schemas to convey information + that is not pertinent to validation. For example, such metadata + members could provide hints to code generators or trigger some + special behavior for a library that generates user interfaces from + schemas. + + Users SHOULD NOT expect metadata members to be understood by other + parties. As a result, if consistent validation with other parties is + a requirement, users MUST NOT use metadata members to affect how + schema validation, as described in Section 3, works. + + Users MAY expect metadata members to be understood by other parties + and MAY use metadata members to affect how schema validation works, + if these other parties are somehow known to support these metadata + members. For example, two parties may agree, out of band, that they + will support an extended JTD with a custom metadata member that + affects validation. + +3. Semantics + + This section describes when an instance is valid against a correct + JTD schema and the error indicators to produce when an instance is + invalid. + +3.1. Allowing Additional Properties + + Users will have different desired behavior with respect to + "unspecified" members in an instance. For example, consider the JTD + schema in Figure 2: + + { "properties": { "a": { "type": "string" }}} + + Figure 2: An Illustrative JTD Schema + + Some users may expect that + + {"a": "foo", "b": "bar"} + + satisfies the schema in Figure 2. Others may disagree, as "b" is not + one of the properties described in the schema. In this document, + allowing such "unspecified" members, like "b" in this example, + happens when evaluation is in "allow additional properties" mode. + + Evaluation of a schema does not allow additional properties by + default, but this can be overridden by having the schema include a + member named "additionalProperties", where that member has a value of + "true". + + More formally, evaluation of a schema _S_ is in "allow additional + properties" mode if there exists a member of _S_ whose name equals + "additionalProperties" and whose value is a boolean "true". + Otherwise, evaluation of _S_ is not in "allow additional properties" + mode. + + See Section 3.3.6 for how allowing unknown properties affects schema + evaluation, but briefly, the schema + + { "properties": { "a": { "type": "string" }}} + + rejects + + { "a": "foo", "b": "bar" } + + However, the schema + + { + "additionalProperties": true, + "properties": { "a": { "type": "string" }} + } + + accepts + + { "a": "foo", "b": "bar" } + + Note that "additionalProperties" does not get "inherited" by + subschemas. For example, the JTD schema + + { + "additionalProperties": true, + "properties": { + "a": { + "properties": { + "b": { "type": "string" } + } + } + } + } + + accepts + + { "a": { "b": "c" }, "foo": "bar" } + + but rejects + + { "a": { "b": "c", "foo": "bar" }} + + because the "additionalProperties" at the root level does not affect + the behavior of subschemas. + + Note from Figure 1 that only schemas of the "properties" form may + have a member named "additionalProperties". + +3.2. Errors + + To facilitate consistent validation error handling, this document + specifies a standard error indicator format. Implementations SHOULD + support producing error indicators in this standard form. + + The standard error indicator format is a JSON array. The order of + the elements of this array is not specified. The elements of this + array are JSON objects with: + + * A member with the name "instancePath", whose value is a JSON + string encoding a JSON Pointer. This JSON Pointer will point to + the part of the instance that was rejected. + + * A member with the name "schemaPath", whose value is a JSON string + encoding a JSON Pointer. This JSON Pointer will point to the part + of the schema that rejected the instance. + + The values for "instancePath" and "schemaPath" depend on the form of + the schema and are described in detail in Section 3.3. + +3.3. Forms + + This section describes, for each of the eight JTD schema forms, the + rules dictating whether an instance is accepted, as well as the error + indicators to produce when an instance is invalid. + + The forms a correct schema may take on are formally described in + Section 2. + +3.3.1. Empty + + The "empty" form is meant to describe instances whose values are + unknown, unpredictable, or otherwise unconstrained by the schema. + The syntax of the "empty" form is described in Section 2.2.1. + + If a schema is of the "empty" form, then it accepts all instances. A + schema of the "empty" form will never produce any error indicators. + +3.3.2. Ref + + The "ref" form is for when a schema is defined in terms of something + in the "definitions" of the root schema. The "ref" form enables + schemas to be less repetitive and also enables describing recursive + structures. The syntax of the "ref" form is described in + Section 2.2.2. + + If a schema is of the "ref" form, then: + + * If the schema has a member named "nullable" whose value is the + boolean "true", and the instance is the JSON primitive value + "null", then the schema accepts the instance. + + Otherwise: + + - Let _R_ be the value of the schema member with the name "ref". + + - Let _B_ be the root schema containing the schema or the schema + itself if it is a root schema. + + - Let _D_ be the member of _B_ with the name "definitions". Per + Section 2, we know _D_ exists. + + - Let _S_ be the value of the member of _D_ whose name equals + _R_. Per Section 2.2.2, we know _S_ exists and is a schema. + + The schema accepts the instance if and only if _S_ accepts the + instance. Otherwise, the error indicators to return in this case are + the union of the error indicators from evaluating _S_ against the + instance. + + For example, the schema + + { + "definitions": { "a": { "type": "float32" }}, + "ref": "a" + } + + accepts + + 123 + + but rejects + + null + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/definitions/a/type" }] + + The schema + + { + "definitions": { "a": { "type": "float32" }}, + "ref": "a", + "nullable": true + } + + accepts + + null + + because the schema has a "nullable" member whose value is "true". + + Note that "nullable" being "false" has no effect in any of the forms + described in this document. For example, the schema + + { + "definitions": { "a": { "nullable": false, "type": "float32" }}, + "ref": "a", + "nullable": true + } + + accepts + + null + + In other words, it is not the case that putting a "false" value for + "nullable" will ever override a "nullable" member in schemas of the + "ref" form; it is correct, though ineffectual, to have a value of + "false" for the "nullable" member in a schema. + +3.3.3. Type + + The "type" form is meant to describe instances whose value is a + boolean, number, string, or timestamp [RFC3339]. The syntax of the + "type" form is described in Section 2.2.3. + + If a schema is of the "type" form, then: + + * If the schema has a member named "nullable" whose value is the + boolean "true", and the instance is the JSON primitive value + "null", then the schema accepts the instance. + + Otherwise: + + Let _T_ be the value of the member with the name "type". The + following table describes whether the instance is accepted, as + a function of _T_'s value: + + +============+=========================================+ + | If _"T"_ | then the instance is accepted if it is | + | equals ... | ... | + +============+=========================================+ + | boolean | equal to "true" or "false" | + +------------+-----------------------------------------+ + | float32 | a JSON number | + +------------+-----------------------------------------+ + | float64 | a JSON number | + +------------+-----------------------------------------+ + | int8 | See Table 2 | + +------------+-----------------------------------------+ + | uint8 | See Table 2 | + +------------+-----------------------------------------+ + | int16 | See Table 2 | + +------------+-----------------------------------------+ + | uint16 | See Table 2 | + +------------+-----------------------------------------+ + | int32 | See Table 2 | + +------------+-----------------------------------------+ + | uint32 | See Table 2 | + +------------+-----------------------------------------+ + | string | a JSON string | + +------------+-----------------------------------------+ + | timestamp | a JSON string that follows the standard | + | | format described in [RFC3339], as | + | | refined by Section 3.3 of [RFC4287] | + +------------+-----------------------------------------+ + + Table 1: Accepted Values for Type + + "float32" and "float64" are distinguished from each other in + their intent. "float32" indicates data intended to be processed + as an IEEE 754 single-precision float, whereas "float64" + indicates data intended to be processed as an IEEE 754 double- + precision float. Tools that generate code from JTD schemas + will likely produce different code for "float32" than for + "float64". + + If _T_ starts with "int" or "uint", then the instance is accepted if + and only if it is a JSON number encoding a value with zero fractional + part. Depending on the value of _T_, this encoded number must + additionally fall within a particular range: + + +========+===========================+===========================+ + | _"T"_ | Minimum Value (Inclusive) | Maximum Value (Inclusive) | + +========+===========================+===========================+ + | int8 | -128 | 127 | + +--------+---------------------------+---------------------------+ + | uint8 | 0 | 255 | + +--------+---------------------------+---------------------------+ + | int16 | -32,768 | 32,767 | + +--------+---------------------------+---------------------------+ + | uint16 | 0 | 65,535 | + +--------+---------------------------+---------------------------+ + | int32 | -2,147,483,648 | 2,147,483,647 | + +--------+---------------------------+---------------------------+ + | uint32 | 0 | 4,294,967,295 | + +--------+---------------------------+---------------------------+ + + Table 2: Ranges for Integer Types + + Note that + + 10 + + and + + 10.0 + + and + + 1.0e1 + + encode values with zero fractional part, whereas + + 10.5 + + encodes a number with a non-zero fractional part. Thus, the schema + + {"type": "int8"} + + accepts + + 10 + + and + + 10.0 + + and + + 1.0e1 + + but rejects + + 10.5 + + as well as + + false + + because "false" is not a number at all. + + If the instance is not accepted, then the error indicator for this + case shall have an "instancePath" pointing to the instance and a + "schemaPath" pointing to the schema member with the name "type". + + For example, the schema + + {"type": "boolean"} + + accepts + + false + + but rejects + + 127 + + The schema + + {"type": "float32"} + + accepts + + 10.5 + + and + + 127 + + but rejects + + false + + The schema + + {"type": "string"} + + accepts + + "1985-04-12T23:20:50.52Z" + + and + + "foo" + + but rejects + + false + + The schema + + {"type": "timestamp"} + + accepts + + "1985-04-12T23:20:50.52Z" + + but rejects + + "foo" + + and + + false + + The schema + + {"type": "boolean", "nullable": true} + + accepts + + null + + and + + false + + but rejects + + 127 + + In all of the examples of rejected instances given in this section, + the error indicator to produce is: + + [{ "instancePath": "", "schemaPath": "/type" }] + +3.3.4. Enum + + The "enum" form is meant to describe instances whose value must be + one of a given set of string values. The syntax of the "enum" form + is described in Section 2.2.4. + + If a schema is of the "enum" form, then: + + * If the schema has a member named "nullable" whose value is the + boolean "true", and the instance is the JSON primitive value + "null", then the schema accepts the instance. + + Otherwise: + + Let _E_ be the value of the schema member with the name "enum". + The instance is accepted if and only if it is equal to one of + the elements of _E_. + + If the instance is not accepted, then the error indicator for this + case shall have an "instancePath" pointing to the instance and a + "schemaPath" pointing to the schema member with the name "enum". + + For example, the schema + + { "enum": ["PENDING", "DONE", "CANCELED"] } + + accepts + + "PENDING" + + and + + "DONE" + + and + + "CANCELED" + + but rejects all of + + 0 + + and + + 1 + + and + + 2 + + and + + "UNKNOWN" + + and + + null + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/enum" }] + + The schema + + { "enum": ["PENDING", "DONE", "CANCELED"], "nullable": true } + + accepts + + "PENDING" + + and + + null + + but rejects + + 1 + + and + + "UNKNOWN" + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/enum" }] + +3.3.5. Elements + + The "elements" form is meant to describe instances that must be + arrays. A further subschema describes the elements of the array. + The syntax of the "elements" form is described in Section 2.2.5. + + If a schema is of the "elements" form, then: + + * If the schema has a member named "nullable" whose value is the + boolean "true", and the instance is the JSON primitive value + "null", then the schema accepts the instance. + + Otherwise: + + Let _S_ be the value of the schema member with the name + "elements". The instance is accepted if and only if all of the + following are true: + + o The instance is an array. Otherwise, the error indicator + for this case shall have an "instancePath" pointing to the + instance and a "schemaPath" pointing to the schema member + with the name "elements". + + o If the instance is an array, then every element of the + instance must be accepted by _S_. Otherwise, the error + indicators for this case are the union of all the errors + arising from evaluating _S_ against elements of the + instance. + + For example, the schema + + { + "elements": { + "type": "float32" + } + } + + accepts + + [] + + and + + [1, 2, 3] + + but rejects + + null + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/elements" }] + + and rejects + + [1, 2, "foo", 3, "bar"] + + with the error indicators + + [ + { "instancePath": "/2", "schemaPath": "/elements/type" }, + { "instancePath": "/4", "schemaPath": "/elements/type" } + ] + + The schema + + { + "elements": { + "type": "float32" + }, + "nullable": true + } + + accepts + + null + + and + + [] + + and + + [1, 2, 3] + + but rejects + + [1, 2, "foo", 3, "bar"] + + with the error indicators + + [ + { "instancePath": "/2", "schemaPath": "/elements/type" }, + { "instancePath": "/4", "schemaPath": "/elements/type" } + ] + +3.3.6. Properties + + The "properties" form is meant to describe JSON objects being used as + a "struct". The syntax of the "properties" form is described in + Section 2.2.6. + + If a schema is of the "properties" form, then: + + * If the schema has a member named "nullable" whose value is the + boolean "true", and the instance is the JSON primitive value + "null", then the schema accepts the instance. + + Otherwise: + + - The instance must be an object. + + Otherwise, the schema rejects the instance. The error + indicator for this case shall have an "instancePath" pointing + to the instance, and a "schemaPath" pointing to the schema + member with the name "properties" if such a schema member + exists; if such a member doesn't exist, "schemaPath" shall + point to the schema member with the name "optionalProperties". + + - If the instance is an object, and the schema has a member named + "properties", then let _P_ be the value of the schema member + named "properties". Per Section 2.2.6, we know _P_ is an + object. For every member name in _P_, a member of the same + name in the instance must exist. + + Otherwise, the schema rejects the instance. The error + indicator for this case shall have an "instancePath" pointing + to the instance, and a "schemaPath" pointing to the member of + _P_ failing the requirement just described. + + - If the instance is an object, then let _P_ be the value of the + schema member named "properties" (if it exists) and _O_ be the + value of the schema member named "optionalProperties" (if it + exists). + + For every member _I_ of the instance, find a member with the + same name as _I_'s in _P_ or _O_. Per Section 2.2.6, we know it + is not possible for both _P_ and _O_ to have such a member. If + the "discriminator tag exemption" is in effect on _I_ (see + Section 3.3.8), then ignore _I_. + + Otherwise: + + o If no such member in _P_ or _O_ exists and validation is not + in "allow additional properties" mode (see Section 3.1), + then the schema rejects the instance. + + The error indicator for this case has an "instancePath" + pointing to _I_ and a "schemaPath" pointing to the schema. + + o If such a member in _P_ or _O_ does exist, then call this + member _S_. If _S_ rejects _I_'s value, then the schema + rejects the instance. + + The error indicators for this case are the union of the + error indicators from evaluating _S_ against _I_'s value. + + If an instance is an object, it may have multiple errors arising + from the second and third bullet in the list above. In this case, + the error indicators are the union of the errors. + + For example, the schema + + { + "properties": { + "a": { "type": "string" }, + "b": { "type": "string" } + }, + "optionalProperties": { + "c": { "type": "string" }, + "d": { "type": "string" } + } + } + + accepts + + { "a": "foo", "b": "bar" } + + and + + { "a": "foo", "b": "bar", "c": "baz" } + + and + + { "a": "foo", "b": "bar", "c": "baz", "d": "quux" } + + and + + { "a": "foo", "b": "bar", "d": "quux" } + + but rejects + + null + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/properties" }] + + and rejects + + { "b": 3, "c": 3, "e": 3 } + + with the error indicators + + [ + { "instancePath": "", + "schemaPath": "/properties/a" }, + { "instancePath": "/b", + "schemaPath": "/properties/b/type" }, + { "instancePath": "/c", + "schemaPath": "/optionalProperties/c/type" }, + { "instancePath": "/e", + "schemaPath": "" } + ] + + If instead the schema had "additionalProperties: true" but was + otherwise the same: + + { + "properties": { + "a": { "type": "string" }, + "b": { "type": "string" } + }, + "optionalProperties": { + "c": { "type": "string" }, + "d": { "type": "string" } + }, + "additionalProperties": true + } + + and the instance remained the same: + + { "b": 3, "c": 3, "e": 3 } + + then the error indicators from evaluating the instance against the + schema would be: + + [ + { "instancePath": "", + "schemaPath": "/properties/a" }, + { "instancePath": "/b", + "schemaPath": "/properties/b/type" }, + { "instancePath": "/c", + "schemaPath": "/optionalProperties/c/type" }, + ] + + These are the same errors as before, except the final error + (associated with the additional member named "e" in the instance) + is no longer present. This is because "additionalProperties: + true" enables "allow additional properties" mode on the schema. + + Finally, the schema + + { + "nullable": true, + "properties": { + "a": { "type": "string" }, + "b": { "type": "string" } + }, + "optionalProperties": { + "c": { "type": "string" }, + "d": { "type": "string" } + }, + "additionalProperties": true + } + + accepts + + null + + but rejects + + { "b": 3, "c": 3, "e": 3 } + + with the error indicators + + [ + { "instancePath": "", + "schemaPath": "/properties/a" }, + { "instancePath": "/b", + "schemaPath": "/properties/b/type" }, + { "instancePath": "/c", + "schemaPath": "/optionalProperties/c/type" }, + ] + +3.3.7. Values + + The "values" form is meant to describe instances that are JSON + objects being used as an associative array. The syntax of the + "values" form is described in Section 2.2.7. + + If a schema is of the "values" form, then: + + * If the schema has a member named "nullable" whose value is the + boolean "true", and the instance is the JSON primitive value + "null", then the schema accepts the instance. + + Otherwise: + + Let _S_ be the value of the schema member with the name + "values". The instance is accepted if and only if all of the + following are true: + + o The instance is an object. Otherwise, the error indicator + for this case shall have an "instancePath" pointing to the + instance and a "schemaPath" pointing to the schema member + with the name "values". + + o If the instance is an object, then every member value of the + instance must be accepted by _S_. Otherwise, the error + indicators for this case are the union of all the error + indicators arising from evaluating _S_ against member values + of the instance. + + For example, the schema + + { + "values": { + "type": "float32" + } + } + + accepts + + {} + + and + + {"a": 1, "b": 2} + + but rejects + + null + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/values" }] + + and rejects + + { "a": 1, "b": 2, "c": "foo", "d": 3, "e": "bar" } + + with the error indicators + + [ + { "instancePath": "/c", "schemaPath": "/values/type" }, + { "instancePath": "/e", "schemaPath": "/values/type" } + ] + + The schema + + { + "nullable": true, + "values": { + "type": "float32" + } + } + + accepts + + null + + but rejects + + { "a": 1, "b": 2, "c": "foo", "d": 3, "e": "bar" } + + with the error indicators + + [ + { "instancePath": "/c", "schemaPath": "/values/type" }, + { "instancePath": "/e", "schemaPath": "/values/type" } + ] + +3.3.8. Discriminator + + The "discriminator" form is meant to describe JSON objects being used + in a fashion similar to a discriminated union construct in C-like + languages. The syntax of the "discriminator" form is described in + Section 2.2.8. + + When a schema is of the "discriminator" form, it validates that: + + * the instance is an object, + + * the instance has a particular "tag" property, + + * this "tag" property's value is a string within a set of valid + values, and + + * the instance satisfies another schema, where this other schema is + chosen based on the value of the "tag" property. + + The behavior of the "discriminator" form is more complex than the + other keywords. Readers familiar with CDDL may find the final + example in Appendix B helpful in understanding its behavior. What + follows in this section is a description of the "discriminator" + form's behavior, as well as some examples. + + If a schema is of the "discriminator" form, then: + + * Let _D_ be the schema member with the name "discriminator". + + * Let _M_ be the schema member with the name "mapping". + + * Let _I_ be the instance member whose name equals _D_'s value. _I_ + may, for some rejected instances, not exist. + + * Let _S_ be the member of _M_ whose name equals _I_'s value. _S_ + may, for some rejected instances, not exist. + + If the schema has a member named "nullable" whose value is the + boolean "true", and the instance is the JSON primitive value "null", + then the schema accepts the instance. Otherwise, the instance is + accepted if and only if all of the following are true: + + * The instance is an object. + + Otherwise, the error indicator for this case shall have an + "instancePath" pointing to the instance and a "schemaPath" + pointing to _D_. + + * If the instance is a JSON object, then _I_ must exist. + + Otherwise, the error indicator for this case shall have an + "instancePath" pointing to the instance and a "schemaPath" + pointing to _D_. + + * If the instance is a JSON object and _I_ exists, _I_'s value must + be a string. + + Otherwise, the error indicator for this case shall have an + "instancePath" pointing to _I_ and a "schemaPath" pointing to _D_. + + * If the instance is a JSON object and _I_ exists and has a string + value, then _S_ must exist. + + Otherwise, the error indicator for this case shall have an + "instancePath" pointing to _I_ and a "schemaPath" pointing to _M_. + + * If the instance is a JSON object, _I_ exists, and _S_ exists, then + the instance must satisfy _S_'s value. Per Section 2, we know + _S_'s value is a schema of the "properties" form. Apply the + "discriminator tag exemption" afforded in Section 3.3.6 to _I_ + when evaluating whether the instance satisfies _S_'s value. + + Otherwise, the error indicators for this case shall be error + indicators from evaluating _S_'s value against the instance, with + the "discriminator tag exemption" applied to _I_. + + The list items above are defined in a mutually exclusive way. For + any given instance and schema, exactly one of the list items above + will apply. + + For example, the schema + + { + "discriminator": "version", + "mapping": { + "v1": { + "properties": { + "a": { "type": "float32" } + } + }, + "v2": { + "properties": { + "a": { "type": "string" } + } + } + } + } + + rejects + + null + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/discriminator" }] + + (This is the case of the instance not being an object.) + + Also rejected is + + {} + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/discriminator" }] + + (This is the case of _I_ not existing.) + + Also rejected is + + { "version": 1 } + + with the error indicator + + [ + { + "instancePath": "/version", + "schemaPath": "/discriminator" + } + ] + + (This is the case of _I_ existing but not having a string value.) + + Also rejected is + + { "version": "v3" } + + with the error indicator + + [ + { + "instancePath": "/version", + "schemaPath": "/mapping" + } + ] + + (This is the case of _I_ existing and having a string value but _S_ + not existing.) + + Also rejected is + + { "version": "v2", "a": 3 } + + with the error indicator + + [ + { + "instancePath": "/a", + "schemaPath": "/mapping/v2/properties/a/type" + } + ] + + (This is the case of _I_ and _S_ existing but the instance not + satisfying _S_'s value.) + + Finally, the schema accepts + + { "version": "v2", "a": "foo" } + + This instance is accepted even though "version" is not mentioned by + "/mapping/v2/properties"; the "discriminator tag exemption" ensures + that "version" is not treated as an additional property when + evaluating the instance against _S_'s value. + + By contrast, consider the same schema but with "nullable" being + "true". The schema + + { + "nullable": true, + "discriminator": "version", + "mapping": { + "v1": { + "properties": { + "a": { "type": "float32" } + } + }, + "v2": { + "properties": { + "a": { "type": "string" } + } + } + } + } + + accepts + + null + + To further illustrate the "discriminator" form with examples, recall + the JTD schema in Section 2.2.8, reproduced here: + + { + "discriminator": "event_type", + "mapping": { + "account_deleted": { + "properties": { + "account_id": { "type": "string" } + } + }, + "account_payment_plan_changed": { + "properties": { + "account_id": { "type": "string" }, + "payment_plan": { "enum": ["FREE", "PAID"] } + }, + "optionalProperties": { + "upgraded_by": { "type": "string" } + } + } + } + } + + This schema accepts + + { "event_type": "account_deleted", "account_id": "abc-123" } + + and + + { + "event_type": "account_payment_plan_changed", + "account_id": "abc-123", + "payment_plan": "PAID" + } + + and + + { + "event_type": "account_payment_plan_changed", + "account_id": "abc-123", + "payment_plan": "PAID", + "upgraded_by": "users/mkhwarizmi" + } + + but rejects + + {} + + with the error indicator + + [{ "instancePath": "", "schemaPath": "/discriminator" }] + + and rejects + + { "event_type": "some_other_event_type" } + + with the error indicator + + [ + { + "instancePath": "/event_type", + "schemaPath": "/mapping" + } + ] + + and rejects + + { "event_type": "account_deleted" } + + with the error indicator + + [{ + "instancePath": "", + "schemaPath": "/mapping/account_deleted/properties/account_id" + }] + + and rejects + + { + "event_type": "account_payment_plan_changed", + "account_id": "abc-123", + "payment_plan": "PAID", + "xxx": "asdf" + } + + with the error indicator + + [{ + "instancePath": "/xxx", + "schemaPath": "/mapping/account_payment_plan_changed" + }] + +4. IANA Considerations + + This document has no IANA actions. + +5. Security Considerations + + Implementations of JTD will necessarily be manipulating JSON data. + Therefore, the security considerations of [RFC8259] are all relevant + here. + + Implementations that evaluate user-inputted schemas SHOULD implement + mechanisms to detect and abort circular references that might cause a + naive implementation to go into an infinite loop. Without such + mechanisms, implementations may be vulnerable to denial-of-service + attacks. + +6. References + +6.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, + DOI 10.17487/RFC2119, March 1997, + . + + [RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet: + Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002, + . + + [RFC4287] Nottingham, M., Ed. and R. Sayre, Ed., "The Atom + Syndication Format", RFC 4287, DOI 10.17487/RFC4287, + December 2005, . + + [RFC6901] Bryan, P., Ed., Zyp, K., and M. Nottingham, Ed., + "JavaScript Object Notation (JSON) Pointer", RFC 6901, + DOI 10.17487/RFC6901, April 2013, + . + + [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC + 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, + May 2017, . + + [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data + Interchange Format", STD 90, RFC 8259, + DOI 10.17487/RFC8259, December 2017, + . + + [RFC8610] Birkholz, H., Vigano, C., and C. Bormann, "Concise Data + Definition Language (CDDL): A Notational Convention to + Express Concise Binary Object Representation (CBOR) and + JSON Data Structures", RFC 8610, DOI 10.17487/RFC8610, + June 2019, . + +6.2. Informative References + + [JSON-SCHEMA] + Wright, A., Andrews, H., Hutton, B., and G. Dennis, "JSON + Schema: A Media Type for Describing JSON Documents", Work + in Progress, Internet-Draft, draft-handrews-json-schema- + 02, 17 September 2019, . + + [OPENAPI] OpenAPI Initiative, "OpenAPI Specification", February + 2020, . + + [RFC7071] Borenstein, N. and M. Kucherawy, "A Media Type for + Reputation Interchange", RFC 7071, DOI 10.17487/RFC7071, + November 2013, . + + [RFC7493] Bray, T., Ed., "The I-JSON Message Format", RFC 7493, + DOI 10.17487/RFC7493, March 2015, + . + +Appendix A. Rationale for Omitted Features + + This appendix is not normative. + + This section describes possible features that are intentionally left + out of JSON Type Definition and justifies why these features are + omitted. + +A.1. Support for 64-Bit Numbers + + This document does not allow "int64" or "uint64" as values for the + JTD "type" keyword (see Sections 2.2.3 and 3.3.3). Such hypothetical + "int64" or "uint64" types would behave like "int32" or "uint32" + (respectively) but with the range of values associated with 64-bit + instead of 32-bit integers. That is: + + * "int64" would accept numbers between -(2**63) and (2**63)-1 + + * "uint64" would accept numbers between 0 and (2**64)-1 + + Users of "int64" and "uint64" would likely expect that the full range + of signed or unsigned 64-bit integers could interoperably be + transmitted as JSON without loss of precision. But this assumption + is likely to be incorrect, for the reasons given in Section 2.2 of + [RFC7493]. + + "int64" and "uint64" likely would have led users to falsely assume + that the full range of 64-bit integers can be interoperably processed + as JSON without loss of precision. To avoid leading users astray, + JTD omits "int64" and "uint64". + +A.2. Support for Non-root Definitions + + This document disallows the "definitions" keyword from appearing + outside of root schemas (see Figure 1). Conceivably, this document + could have instead allowed "definitions" to appear on any schema, + even non-root ones. Under this alternative design, "ref"s would + resolve to a definition in the "nearest" (i.e., most nested) schema + that both contained the "ref" and had a suitably named "definitions" + member. + + For instance, under this alternative approach, one could define + schemas like the one in Figure 3. + + { + "properties": { + "foo": { + "definitions": { + "user": { "properties": { "user_id": {"type": "string" }}} + }, + "ref": "user" + }, + "bar": { + "definitions": { + "user": { "properties": { "user_id": {"type": "string" }}} + }, + "ref": "user" + }, + "baz": { + "definitions": { + "user": { "properties": { "userId": {"type": "string" }}} + }, + "ref": "user" + } + } + } + + Figure 3: A Hypothetical Schema Had This Document Permitted Non-root + Definitions. This Is Not a Correct JTD Schema. + + If schemas like that in Figure 3 were permitted, code generation from + JTD schemas would be more difficult, and the generated code would be + less useful. + + Code generation would be more difficult because it would force code + generators to implement a name-mangling scheme for types generated + from definitions. This additional difficulty is not immense, but it + adds complexity to an otherwise relatively trivial task. + + Generated code would be less useful because generated, mangled struct + names are less pithy than human-defined struct names. For instance, + the "user" definitions in Figure 3 might have been generated into + types named "PropertiesFooUser", "PropertiesBarUser", and + "PropertiesBazUser"; obtuse names like these are less useful to + human-written code than names like "User". + + Furthermore, even though "PropertiesFooUser" and "PropertiesBarUser" + would be essentially identical, they would not be interchangeable in + many statically typed programming languages. A code generator could + attempt to circumvent this by deduplicating identical definitions, + but then the user might be confused as to why the subtly distinct + "PropertiesBazUser", defined from a schema allowing a property named + "userId" (not "user_id"), was not deduplicated. + + Because there seem to be implementation and usability challenges + associated with non-root definitions, and because it would be easier + to later amend JTD to permit for non-root definitions than to later + amend JTD to prohibit them, this document does not permit non-root + definitions in JTD schemas. + +Appendix B. Comparison with CDDL + + This appendix is not normative. + + To aid the reader familiar with CDDL, this section illustrates how + JTD works by presenting JTD schemas and CDDL schemas that accept and + reject the same instances. + + The JTD schema + + {} + + accepts the same instances as the CDDL rule + + root = any + + The JTD schema + + { + "definitions": { + "a": { "elements": { "ref": "b" }}, + "b": { "type": "float32" } + }, + "elements": { + "ref": "a" + } + } + + accepts the same instances as the CDDL rule + + root = [* a] + a = [* b] + b = number + + The JTD schema + + { "enum": ["PENDING", "DONE", "CANCELED"]} + + accepts the same instances as the CDDL rule + + root = "PENDING" / "DONE" / "CANCELED" + + The JTD schema + + {"type": "boolean"} + + accepts the same instances as the CDDL rule + + root = bool + + The JTD schemas: + + {"type": "float32"} + + and + + {"type": "float64"} + + both accept the same instances as the CDDL rule + + root = number + + The JTD schema + + {"type": "string"} + + accepts the same instances as the CDDL rule + + root = tstr + + The JTD schema + + {"type": "timestamp"} + + accepts the same instances as the CDDL rule + + root = tdate + + The JTD schema + + { "elements": { "type": "float32" }} + + accepts the same instances as the CDDL rule + + root = [* number] + + The JTD schema + + { + "properties": { + "a": { "type": "boolean" }, + "b": { "type": "float32" } + }, + "optionalProperties": { + "c": { "type": "string" }, + "d": { "type": "timestamp" } + } + } + + accepts the same instances as the CDDL rule + + root = { a: bool, b: number, ? c: tstr, ? d: tdate } + + The JTD schema + + { "values": { "type": "float32" }} + + accepts the same instances as the CDDL rule + + root = { * tstr => number } + + Finally, the JTD schema + + { + "discriminator": "a", + "mapping": { + "foo": { + "properties": { + "b": { "type": "float32" } + } + }, + "bar": { + "properties": { + "b": { "type": "string" } + } + } + } + } + + accepts the same instances as the CDDL rule + + root = { a: "foo", b: number } / { a: "bar", b: tstr } + +Appendix C. Example + + This appendix is not normative. + + As a demonstration of JTD, in Figure 4 is a JTD schema closely + equivalent to the plain-English definition "reputation-object" + described in Section 6.2.2 of [RFC7071]: + + { + "properties": { + "application": { "type": "string" }, + "reputons": { + "elements": { + "additionalProperties": true, + "properties": { + "rater": { "type": "string" }, + "assertion": { "type": "string" }, + "rated": { "type": "string" }, + "rating": { "type": "float32" }, + }, + "optionalProperties": { + "confidence": { "type": "float32" }, + "normal-rating": { "type": "float32" }, + "sample-size": { "type": "float64" }, + "generated": { "type": "float64" }, + "expires": { "type": "float64" } + } + } + } + } + } + + Figure 4: A JTD Schema Describing "reputation-object" from + Section 6.2.2 of [RFC7071] + + This schema does not enforce the requirement that "sample-size", + "generated", and "expires" be unbounded positive integers. It does + not express the limitation that "rating", "confidence", and "normal- + rating" should not have more than three decimal places of precision. + + The example in Figure 4 can be compared against the equivalent + example in Appendix H of [RFC8610]. + +Acknowledgments + + Carsten Bormann provided lots of useful guidance and feedback on + JTD's design and the structure of this document. + + Evgeny Poberezkin suggested the addition of "nullable" and thoroughly + vetted this document for mistakes and opportunities for + simplification. + + Tim Bray suggested the current "ref" model and the addition of + "enum". Anders Rundgren suggested extending "type" to have more + support for numerical types. James Manger suggested additional + clarifying examples of how integer types work. Adrian Farrel + suggested many improvements to help make this document clearer. + + Members of the IETF JSON mailing list -- in particular, Pete Cordell, + Phillip Hallam-Baker, Nico Williams, John Cowan, Rob Sayre, and Erik + Wilde -- provided lots of useful feedback. + + OpenAPI's "discriminator" object [OPENAPI] inspired the + "discriminator" form. [JSON-SCHEMA] influenced various parts of + JTD's early design. + +Author's Address + + Ulysse Carion + Segment.io, Inc + 100 California Street + San Francisco, CA 94111 + United States of America + + Email: ulysse@segment.com -- cgit v1.2.3