From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc9462.txt | 866 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 866 insertions(+) create mode 100644 doc/rfc/rfc9462.txt (limited to 'doc/rfc/rfc9462.txt') diff --git a/doc/rfc/rfc9462.txt b/doc/rfc/rfc9462.txt new file mode 100644 index 0000000..8bad98d --- /dev/null +++ b/doc/rfc/rfc9462.txt @@ -0,0 +1,866 @@ + + + + +Internet Engineering Task Force (IETF) T. Pauly +Request for Comments: 9462 E. Kinnear +Category: Standards Track Apple Inc. +ISSN: 2070-1721 C. A. Wood + Cloudflare + P. McManus + Fastly + T. Jensen + Microsoft + November 2023 + + + Discovery of Designated Resolvers + +Abstract + + This document defines Discovery of Designated Resolvers (DDR), a set + of mechanisms for DNS clients to use DNS records to discover a + resolver's encrypted DNS configuration. An Encrypted DNS Resolver + discovered in this manner is referred to as a "Designated Resolver". + These mechanisms can be used to move from unencrypted DNS to + encrypted DNS when only the IP address of a resolver is known. These + mechanisms are designed to be limited to cases where Unencrypted DNS + Resolvers and their Designated Resolvers are operated by the same + entity or cooperating entities. It can also be used to discover + support for encrypted DNS protocols when the name of an Encrypted DNS + Resolver is known. + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 7841. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + https://www.rfc-editor.org/info/rfc9462. + +Copyright Notice + + Copyright (c) 2023 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (https://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Revised BSD License text as described in Section 4.e of the + Trust Legal Provisions and are provided without warranty as described + in the Revised BSD License. + +Table of Contents + + 1. Introduction + 1.1. Specification of Requirements + 2. Terminology + 3. DNS Service Binding Records + 4. Discovery Using Resolver IP Addresses + 4.1. Use of Designated Resolvers + 4.1.1. Use of Designated Resolvers across Network Changes + 4.2. Verified Discovery + 4.3. Opportunistic Discovery + 5. Discovery Using Resolver Names + 6. Deployment Considerations + 6.1. Caching Forwarders + 6.2. Certificate Management + 6.3. Server Name Handling + 6.4. Handling Non-DDR Queries for resolver.arpa + 6.5. Interaction with Network-Designated Resolvers + 7. Security Considerations + 8. IANA Considerations + 8.1. Special-Use Domain Name "resolver.arpa" + 8.2. Domain Name Reservation Considerations + 9. References + 9.1. Normative References + 9.2. Informative References + Appendix A. Rationale for Using a Special-Use Domain Name + Appendix B. Rationale for Using SVCB Records + Authors' Addresses + +1. Introduction + + When DNS clients wish to use encrypted DNS protocols such as DNS over + TLS (DoT) [RFC7858], DNS over QUIC (DoQ) [RFC9250], or DNS over HTTPS + (DoH) [RFC8484], they can require additional information beyond the + IP address of the DNS server, such as the resolver's hostname, + alternate IP addresses, non-standard ports, or URI Templates. + However, common configuration mechanisms only provide the resolver's + IP address during configuration. Such mechanisms include network + provisioning protocols like DHCP [RFC2132] [RFC8415] and IPv6 Router + Advertisement (RA) options [RFC8106], as well as manual + configuration. + + This document defines two mechanisms for clients to discover + Designated Resolvers that support these encrypted protocols using DNS + server Service Binding (SVCB) records [RFC9460]: + + 1. When only an IP address of an Unencrypted DNS Resolver is known, + the client queries a Special-Use Domain Name (SUDN) [RFC6761] to + discover DNS SVCB records associated with one or more Encrypted + DNS Resolvers the Unencrypted DNS Resolver has designated for use + when support for DNS encryption is requested (Section 4). + + 2. When the hostname of an Encrypted DNS Resolver is known, the + client requests details by sending a query for a DNS SVCB record. + This can be used to discover alternate encrypted DNS protocols + supported by a known server, or to provide details if a resolver + name is provisioned by a network (Section 5). + + Both of these approaches allow clients to confirm that a discovered + Encrypted DNS Resolver is designated by the originally provisioned + resolver. "Designated" in this context means that the resolvers are + operated by the same entity or cooperating entities; for example, the + resolvers are accessible on the same IP address, or there is a + certificate that contains the IP address for the original designating + resolver. + +1.1. Specification of Requirements + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and + "OPTIONAL" in this document are to be interpreted as described in + BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all + capitals, as shown here. + +2. Terminology + + This document defines the following terms: + + DDR: Discovery of Designated Resolvers. "DDR" refers to the + mechanisms defined in this document. + + Designated Resolver: A resolver, presumably an Encrypted DNS + Resolver, designated by another resolver for use in its own place. + This designation can be verified with TLS certificates. + + Encrypted DNS Resolver: A DNS resolver using any encrypted DNS + transport. This includes current mechanisms such as DoH, DoT, and + DoQ, as well as future mechanisms. + + Unencrypted DNS Resolver: A DNS resolver using a transport without + encryption, historically TCP or UDP port 53. + +3. DNS Service Binding Records + + DNS resolvers can advertise one or more Designated Resolvers that may + offer support over encrypted channels and are controlled by the same + entity. + + When a client discovers Designated Resolvers, it learns information + such as the supported protocols and ports. This information is + provided in ServiceMode SVCB records for DNS servers, although + AliasMode SVCB records can be used to direct clients to the needed + ServiceMode SVCB record per [RFC9460]. The formatting of these + records, including the DNS-unique parameters such as "dohpath", are + defined by [RFC9461]. + + The following is an example of a SVCB record describing a DoH server + discovered by querying for _dns.example.net: + + _dns.example.net. 7200 IN SVCB 1 example.net. ( + alpn=h2 dohpath=/dns-query{?dns} ) + + The following is an example of a SVCB record describing a DoT server + discovered by querying for _dns.example.net: + + _dns.example.net. 7200 IN SVCB 1 dot.example.net ( + alpn=dot port=8530 ) + + The following is an example of a SVCB record describing a DoQ server + discovered by querying for _dns.example.net: + + _dns.example.net. 7200 IN SVCB 1 doq.example.net ( + alpn=doq port=8530 ) + + If multiple Designated Resolvers are available, using one or more + encrypted DNS protocols, the resolver deployment can indicate a + preference using the priority fields in each SVCB record [RFC9460]. + + If the client encounters a mandatory parameter in a SVCB record it + does not understand, it MUST NOT use that record to discover a + Designated Resolver, in accordance with Section 8 of [RFC9460]. The + client can still use other records in the same response if the client + can understand all of their mandatory parameters. This allows future + encrypted deployments to simultaneously support protocols even if a + given client is not aware of all those protocols. For example, if + the Unencrypted DNS Resolver returns three SVCB records -- one for + DoH, one for DoT, and one for a yet-to-exist protocol -- a client + that only supports DoH and DoT should be able to use those records + while safely ignoring the third record. + + To avoid name lookup deadlock, clients that use Designated Resolvers + need to ensure that a specific Encrypted DNS Resolver is not used for + any queries that are needed to resolve the name of the resolver + itself or to perform certificate revocation checks for the resolver, + as described in Section 10 of [RFC8484]. Designated Resolvers need + to ensure that this deadlock is avoidable, as also described in + Section 10 of [RFC8484]. + + This document focuses on discovering DoH, DoT, and DoQ Designated + Resolvers. Other protocols can also use the format defined by + [RFC9461]. However, if any such protocol does not involve some form + of certificate validation, new validation mechanisms will need to be + defined to support validating designation as defined in Section 4.2. + +4. Discovery Using Resolver IP Addresses + + When a DNS client is configured with an Unencrypted DNS Resolver IP + address, it SHOULD query the resolver for SVCB records of a service + with a scheme of "dns" and an authority of "resolver.arpa" before + making other queries. This allows the client to switch to using + encrypted DNS for all other queries, if possible. Specifically, the + client issues a query for _dns.resolver.arpa. with the SVCB resource + record type (64) [RFC9460]. + + Responses to the SVCB query for the "resolver.arpa" SUDN describe + Designated Resolvers. To ensure that different Designated Resolver + configurations can be correctly distinguished and associated with A + and AAAA records for the resolver, ServiceMode SVCB responses to + these queries MUST NOT use the "." or "resolver.arpa" value for the + TargetName. Similarly, clients MUST NOT perform A or AAAA queries + for "resolver.arpa". + + The following is an example of a SVCB record describing a DoH server + discovered by querying for _dns.resolver.arpa.: + + _dns.resolver.arpa. 7200 IN SVCB 1 doh.example.net ( + alpn=h2 dohpath=/dns-query{?dns} ) + + The following is an example of a SVCB record describing a DoT server + discovered by querying for _dns.resolver.arpa.: + + _dns.resolver.arpa. 7200 IN SVCB 1 dot.example.net ( + alpn=dot port=8530 ) + + The following is an example of a SVCB record describing a DoQ server + discovered by querying for _dns.resolver.arpa.: + + _dns.resolver.arpa. 7200 IN SVCB 1 doq.example.net ( + alpn=doq port=8530 ) + + If the recursive resolver that receives this query has one or more + Designated Resolvers, it will return the corresponding SVCB records. + When responding to these special queries for "resolver.arpa", the + recursive resolver SHOULD include the A and AAAA records for the name + of the Designated Resolver in the Additional Answers section. This + will save the DNS client an additional round trip to retrieve the + address of the Designated Resolver; see Section 5 of [RFC9460]. + + Designated Resolvers SHOULD be accessible using the IP address + families that are supported by their associated Unencrypted DNS + Resolvers. If an Unencrypted DNS Resolver is accessible using an + IPv4 address, it ought to provide an A record for an IPv4 address of + the Designated Resolver; similarly, if it is accessible using an IPv6 + address, it ought to provide a AAAA record for an IPv6 address of the + Designated Resolver. The Designated Resolver MAY support more + address families than the Unencrypted DNS Resolver, but it SHOULD NOT + support fewer. If this is not done, clients that only have + connectivity over one address family might not be able to access the + Designated Resolver. + + If the recursive resolver that receives this query has no Designated + Resolvers, it SHOULD return NODATA for queries to the "resolver.arpa" + zone, to provide a consistent and accurate signal to clients that it + does not have a Designated Resolver. + +4.1. Use of Designated Resolvers + + When a client discovers Designated Resolvers from an Unencrypted DNS + Resolver IP address, it can choose to use these Designated Resolvers + either (1) automatically or (2) based on some other policy, + heuristic, or user choice. + + This document defines two preferred methods for automatically using + Designated Resolvers: + + * Verified Discovery (Section 4.2), for when a TLS certificate can + be used to validate the resolver's identity. + + * Opportunistic Discovery (Section 4.3), for when a resolver's IP + address is a private or local address. + + A client MAY additionally use a discovered Designated Resolver + without either of these methods, based on implementation-specific + policy or user input. Details of such policy are out of scope for + this document. Clients MUST NOT automatically use a Designated + Resolver without some sort of validation, such as the two methods + defined in this document or a future mechanism. Use without + validation can allow an attacker to direct traffic to an Encrypted + DNS Resolver that is unrelated to the original Unencrypted DNS + Resolver, as described in Section 7. + + A client MUST NOT reuse a designation discovered using the IP address + of one Unencrypted DNS Resolver in place of any other Unencrypted DNS + Resolver. Instead, the client needs to repeat the discovery process + to discover the Designated Resolver of the other Unencrypted DNS + Resolver. In other words, designations are per-resolver and MUST NOT + be used to configure the client's universal DNS behavior. This + ensures in all cases that queries are being sent to a party + designated by the resolver originally being used. + +4.1.1. Use of Designated Resolvers across Network Changes + + If a client is configured with the same Unencrypted DNS Resolver IP + address on multiple different networks, a Designated Resolver that + has been discovered on one network SHOULD NOT be reused on any of the + other networks without repeating the discovery process for each + network, since the same IP address may be used for different servers + on the different networks. + +4.2. Verified Discovery + + Verified Discovery is a mechanism that allows the automatic use of a + Designated Resolver that supports DNS encryption that performs a TLS + handshake. + + In order to be considered a verified Designated Resolver, the TLS + certificate presented by the Designated Resolver needs to pass the + following checks made by the client: + + 1. The client MUST verify the chain of certificates up to a trust + anchor as described in Section 6 of [RFC5280]. The client SHOULD + use the default system or application trust anchors, unless + otherwise configured. + + 2. The client MUST verify that the certificate contains the IP + address of the designating Unencrypted DNS Resolver in an + iPAddress entry of the subjectAltName extension as described in + Section 4.2.1.6 of [RFC5280]. + + If these checks pass, the client SHOULD use the discovered Designated + Resolver for any cases in which it would have otherwise used the + Unencrypted DNS Resolver, so as to prefer encrypted DNS whenever + possible. + + If these checks fail, the client MUST NOT automatically use the + discovered Designated Resolver if this designation was only + discovered via a _dns.resolver.arpa. query (if the designation was + advertised directly by the network as described in Section 6.5, the + server can still be used). Additionally, the client SHOULD suppress + any further queries for Designated Resolvers using this Unencrypted + DNS Resolver for the length of time indicated by the SVCB record's + Time to Live (TTL) in order to avoid excessive queries that will lead + to further failed validations. The client MAY issue new queries if + the SVCB record's TTL is excessively long (as determined by client + policy) to minimize the length of time an intermittent attacker can + prevent the use of encrypted DNS. + + If the Designated Resolver and the Unencrypted DNS Resolver share an + IP address, clients MAY choose to opportunistically use the + Designated Resolver even without this certificate check + (Section 4.3). If the IP address is not shared, opportunistic use + allows for attackers to redirect queries to an unrelated Encrypted + DNS Resolver, as described in Section 7. + + Connections to a Designated Resolver can use a different IP address + than the IP address of the Unencrypted DNS Resolver -- for example, + if the process of resolving the SVCB service yields additional + addresses. Even when a different IP address is used for the + connection, the TLS certificate checks described in this section + still apply for the original IP address of the Unencrypted DNS + Resolver. + +4.3. Opportunistic Discovery + + There are situations where Verified Discovery of encrypted DNS + configuration over unencrypted DNS is not possible. For example, the + identities of Unencrypted DNS Resolvers on private IP addresses + [RFC1918], Unique Local Addresses (ULAs) [RFC4193], and Link-Local + addresses [RFC3927] [RFC4291] cannot be safely confirmed using TLS + certificates under most conditions. + + An opportunistic privacy profile is defined for DoT in Section 4.1 of + [RFC7858] as a mode in which clients do not validate the name of the + resolver presented in the certificate. This opportunistic privacy + profile similarly applies to DoQ [RFC9250]. For this profile, + Section 4.1 of [RFC7858] explains that clients might or might not + validate the resolver; however, even if clients choose to perform + some certificate validation checks, they will not be able to validate + the names presented in the SubjectAltName (SAN) field of the + certificate for private and local IP addresses. + + A client MAY use information from the SVCB record for + _dns.resolver.arpa. with this opportunistic privacy profile as long + as the IP address of the Encrypted DNS Resolver does not differ from + the IP address of the Unencrypted DNS Resolver. Clients SHOULD use + this mode only for resolvers using private or local IP addresses, + since resolvers that use other addresses are able to provision TLS + certificates for their addresses. + +5. Discovery Using Resolver Names + + A DNS client that already knows the name of an Encrypted DNS Resolver + can use DDR to discover details about all supported encrypted DNS + protocols. This situation can arise if a client has been configured + to use a given Encrypted DNS Resolver, or if a network provisioning + protocol (such as DHCP or IPv6 RAs) provides a name for an Encrypted + DNS Resolver alongside the resolver IP address, such as by using + Discovery of Network-designated Resolvers (DNR) [RFC9463]. + + For these cases, the client simply sends a DNS SVCB query using the + known name of the resolver. This query can be issued to the named + Encrypted DNS Resolver itself or to any other resolver. Unlike the + case of bootstrapping from an Unencrypted DNS Resolver (Section 4), + these records SHOULD be available in the public DNS if the same + domain name's A or AAAA records are available in the public DNS to + allow using any resolver to discover another resolver's Designated + Resolvers. When the name can only be resolved in private namespaces, + these records SHOULD be available to the same audience as the A and + AAAA records. + + For example, if the client already knows about a DoT server + resolver.example.com, it can issue a SVCB query for + _dns.resolver.example.com to discover if there are other encrypted + DNS protocols available. In the following example, the SVCB answers + indicate that resolver.example.com supports both DoH and DoT and that + the DoH server indicates a higher priority than the DoT server. + + _dns.resolver.example.com. 7200 IN SVCB 1 resolver.example.com. ( + alpn=h2 dohpath=/dns-query{?dns} ) + _dns.resolver.example.com. 7200 IN SVCB 2 resolver.example.com. ( + alpn=dot ) + + Clients MUST validate that for any Encrypted DNS Resolver discovered + using a known resolver name, the TLS certificate of the resolver + contains the known name in a subjectAltName extension. In the + example above, this means that both servers need to have certificates + that cover the name resolver.example.com. Often, the various + supported encrypted DNS protocols will be specified such that the + SVCB TargetName matches the known name, as is true in the example + above. However, even when the TargetName is different (for example, + if the DoH server had a TargetName of doh.example.com), the clients + still check for the original known resolver name in the certificate. + + Note that this resolver validation is not related to the DNS resolver + that provided the SVCB answer. + + As another example, being able to discover a Designated Resolver for + a known Encrypted DNS Resolver is useful when a client has a DoT + configuration for foo.resolver.example.com but is on a network that + blocks DoT traffic. The client can still send a query to any other + accessible resolver (either the local network resolver or an + accessible DoH server) to discover if there is a designated DoH + server for foo.resolver.example.com. + +6. Deployment Considerations + + Resolver deployments that support DDR are advised to consider the + following points. + +6.1. Caching Forwarders + + A DNS forwarder SHOULD NOT forward queries for "resolver.arpa" (or + any subdomains) upstream. This prevents a client from receiving a + SVCB record that will fail to authenticate because the forwarder's IP + address is not in the SubjectAltName (SAN) field of the upstream + resolver's Designated Resolver's TLS certificate. A DNS forwarder + that already acts as a completely transparent forwarder MAY choose to + forward these queries when the operator expects that this does not + apply, because the operator either knows that the upstream resolver + does have the forwarder's IP address in its TLS certificate's SAN + field or expects clients to validate the connection via some future + mechanism. + + Operators who choose to forward queries for "resolver.arpa" upstream + should note that client behavior is never guaranteed and that the use + of DDR by a resolver does not communicate a requirement for clients + to use the SVCB record when it cannot be verified. + +6.2. Certificate Management + + Resolver owners that support Verified Discovery will need to list + valid referring IP addresses in their TLS certificates. This may + pose challenges for resolvers with a large number of referring IP + addresses. + +6.3. Server Name Handling + + Clients MUST NOT use "resolver.arpa" as the server name in either + (1) the TLS Server Name Indication (SNI) [RFC8446] for DoT, DoQ, or + DoH connections or (2) the URI host for DoH requests. + + When performing discovery using resolver IP addresses, clients MUST + use the original IP address of the Unencrypted DNS Resolver as the + URI host for DoH requests. + + Note that since IP addresses are not supported by default in the TLS + SNI, resolvers that support discovery using IP addresses will need to + be configured to present the appropriate TLS certificate when no SNI + is present for DoT, DoQ, and DoH. + +6.4. Handling Non-DDR Queries for resolver.arpa + + DNS resolvers that support DDR by responding to queries for + _dns.resolver.arpa. MUST treat resolver.arpa as a locally served zone + per [RFC6303]. In practice, this means that resolvers SHOULD respond + to queries of any type other than SVCB for _dns.resolver.arpa. with + NODATA and queries of any type for any domain name under + resolver.arpa with NODATA. + +6.5. Interaction with Network-Designated Resolvers + + DNR [RFC9463] allows a network to provide designation of resolvers + directly through DHCP [RFC2132] [RFC8415] and through IPv6 RA options + [RFC8106]. When such indications are present, clients can suppress + queries for "resolver.arpa" to the unencrypted DNS server indicated + by the network over DHCP or RAs, and the DNR indications SHOULD take + precedence over those discovered using "resolver.arpa" for the same + resolver if there is a conflict, since DNR is considered a more + reliable source. + + The Designated Resolver information in DNR might not contain a full + set of SvcParams needed to connect to an Encrypted DNS Resolver. In + such a case, the client can use a SVCB query using a resolver name, + as described in Section 5, to the Authentication Domain Name (ADN). + +7. Security Considerations + + Since clients can receive DNS SVCB answers over unencrypted DNS, on- + path attackers can prevent successful discovery by dropping SVCB + queries or answers and thus can prevent clients from switching to + using encrypted DNS. Clients should be aware that it might not be + possible to distinguish between resolvers that do not have any + Designated Resolver and such an active attack. To limit the impact + of discovery queries being dropped either maliciously or + unintentionally, clients can re-send their SVCB queries periodically. + + Section 8.2 of [RFC9461] describes another type of downgrade attack + where an attacker can block connections to the encrypted DNS server. + For DDR, clients need to validate a Designated Resolver using a + connection to the server before trusting it, so attackers that can + block these connections can prevent clients from switching to using + encrypted DNS. + + Encrypted DNS Resolvers that allow discovery using DNS SVCB answers + over unencrypted DNS MUST NOT provide differentiated behavior based + solely on metadata in the SVCB record, such as the HTTP path or + alternate port number, which are parameters that an attacker could + modify. For example, if a DoH resolver provides a filtering service + for one URI path and a non-filtered service for another URI path, an + attacker could select which of these services is used by modifying + the "dohpath" parameter. These attacks can be mitigated by providing + separate resolver IP addresses or hostnames. + + While the IP address of the Unencrypted DNS Resolver is often + provisioned over insecure mechanisms, it can also be provisioned + securely, such as via manual configuration, on a VPN, or on a network + with protections like RA-Guard [RFC6105]. An attacker might try to + direct encrypted DNS traffic to itself by causing the client to think + that a discovered Designated Resolver uses a different IP address + from the Unencrypted DNS Resolver. Such a Designated Resolver might + have a valid certificate but might be operated by an attacker that is + trying to observe or modify user queries without the knowledge of the + client or network. + + If the IP address of a Designated Resolver differs from that of an + Unencrypted DNS Resolver, clients applying Verified Discovery + (Section 4.2) MUST validate that the IP address of the Unencrypted + DNS Resolver is covered by the SubjectAltName (SAN) of the Designated + Resolver's TLS certificate. If that validation fails, the client + MUST NOT automatically use the discovered Designated Resolver. + + Clients using Opportunistic Discovery (Section 4.3) MUST be limited + to cases where the Unencrypted DNS Resolver and Designated Resolver + have the same IP address, which SHOULD be a private or local IP + address. Clients that do not follow Opportunistic Discovery + (Section 4.3) and instead try to connect without first checking for a + designation run the possible risk of being intercepted by an attacker + hosting an Encrypted DNS Resolver on an IP address of an Unencrypted + DNS Resolver where the attacker has failed to gain control of the + Unencrypted DNS Resolver. + + The constraints on the use of Designated Resolvers specified here + apply specifically to the automatic discovery mechanisms defined in + this document, which are referred to as Verified Discovery and + Opportunistic Discovery. Clients MAY use some other mechanism to + verify and use Designated Resolvers discovered using the DNS SVCB + record. However, the use of such an alternate mechanism needs to + take into account the attack scenarios detailed here. + +8. IANA Considerations + +8.1. Special-Use Domain Name "resolver.arpa" + + IANA has registered "resolver.arpa" in the "Special-Use Domain Names" + registry established by [RFC6761]. + + IANA has added an entry in the "Transport-Independent Locally-Served + DNS Zone Registry" for 'resolver.arpa.' with the description "DNS + Resolver Special-Use Domain" and listed this document as the + reference. + +8.2. Domain Name Reservation Considerations + + In accordance with Section 5 of [RFC6761], the answers to the + following questions are provided relative to this document: + + 1. Are human users expected to recognize these names as special and + use them differently? In what way? + + No. This name is used automatically by DNS stub resolvers + running on client devices on behalf of users, and users will + never see this name directly. + + 2. Are writers of application software expected to make their + software recognize these names as special and treat them + differently? In what way? + + No. There is no use case where a non-DNS application (covered by + the next question) would need to use this name. + + 3. Are writers of name resolution APIs and libraries expected to + make their software recognize these names as special and treat + them differently? If so, how? + + Yes. DNS client implementors are expected to use this name when + querying for a resolver's properties instead of records for the + name itself. DNS servers are expected to respond to queries for + this name with their own properties instead of checking the + matching zone as it would for normal domain names. + + 4. Are developers of caching domain name servers expected to make + their implementations recognize these names as special and treat + them differently? If so, how? + + Yes. Caching domain name servers should not forward queries for + this name, to avoid causing validation failures due to IP address + mismatch. + + 5. Are developers of authoritative domain name servers expected to + make their implementations recognize these names as special and + treat them differently? If so, how? + + No. DDR is designed for use by recursive resolvers. + Theoretically, an authoritative server could choose to support + this name if it wants to advertise support for encrypted DNS + protocols over plaintext DNS, but that scenario is covered by + other work in the IETF DNSOP Working Group. + + 6. Does this reserved Special-Use Domain Name have any potential + impact on DNS server operators? If they try to configure their + authoritative DNS server as authoritative for this reserved name, + will compliant name server software reject it as invalid? Do DNS + server operators need to know about that and understand why? + Even if the name server software doesn't prevent them from using + this reserved name, are there other ways that it may not work as + expected, of which the DNS server operator should be aware? + + This name is locally served, and any resolver that supports this + name should never forward the query. DNS server operators should + be aware that records for this name will be used by clients to + modify the way they connect to their resolvers. + + 7. How should DNS Registries/Registrars treat requests to register + this reserved domain name? Should such requests be denied? + Should such requests be allowed, but only to a specially + designated entity? + + IANA holds the registration for this name. Non-IANA requests to + register this name should always be denied by DNS Registries/ + Registrars. + +9. References + +9.1. Normative References + + [RFC1918] Rekhter, Y., Moskowitz, B., Karrenberg, D., de Groot, G. + J., and E. Lear, "Address Allocation for Private + Internets", BCP 5, RFC 1918, DOI 10.17487/RFC1918, + February 1996, . + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, + DOI 10.17487/RFC2119, March 1997, + . + + [RFC3927] Cheshire, S., Aboba, B., and E. Guttman, "Dynamic + Configuration of IPv4 Link-Local Addresses", RFC 3927, + DOI 10.17487/RFC3927, May 2005, + . + + [RFC4193] Hinden, R. and B. Haberman, "Unique Local IPv6 Unicast + Addresses", RFC 4193, DOI 10.17487/RFC4193, October 2005, + . + + [RFC4291] Hinden, R. and S. Deering, "IP Version 6 Addressing + Architecture", RFC 4291, DOI 10.17487/RFC4291, February + 2006, . + + [RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., + Housley, R., and W. Polk, "Internet X.509 Public Key + Infrastructure Certificate and Certificate Revocation List + (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008, + . + + [RFC6303] Andrews, M., "Locally Served DNS Zones", BCP 163, + RFC 6303, DOI 10.17487/RFC6303, July 2011, + . + + [RFC6761] Cheshire, S. and M. Krochmal, "Special-Use Domain Names", + RFC 6761, DOI 10.17487/RFC6761, February 2013, + . + + [RFC7858] Hu, Z., Zhu, L., Heidemann, J., Mankin, A., Wessels, D., + and P. Hoffman, "Specification for DNS over Transport + Layer Security (TLS)", RFC 7858, DOI 10.17487/RFC7858, May + 2016, . + + [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC + 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, + May 2017, . + + [RFC8484] Hoffman, P. and P. McManus, "DNS Queries over HTTPS + (DoH)", RFC 8484, DOI 10.17487/RFC8484, October 2018, + . + + [RFC9250] Huitema, C., Dickinson, S., and A. Mankin, "DNS over + Dedicated QUIC Connections", RFC 9250, + DOI 10.17487/RFC9250, May 2022, + . + + [RFC9460] Schwartz, B., Bishop, M., and E. Nygren, "Service Binding + and Parameter Specification via the DNS (SVCB and HTTPS + Resource Records)", RFC 9460, DOI 10.17487/RFC9460, + November 2023, . + + [RFC9461] Schwartz, B., "Service Binding Mapping for DNS Servers", + RFC 9461, DOI 10.17487/RFC9461, November 2023, + . + + [RFC9463] Boucadair, M., Ed., Reddy.K, T., Ed., Wing, D., Cook, N., + and T. Jensen, "DHCP and Router Advertisement Options for + the Discovery of Network-designated Resolvers (DNR)", + RFC 9463, DOI 10.17487/RFC9463, November 2023, + . + +9.2. Informative References + + [DoH-HINTS] + Schinazi, D., Sullivan, N., and J. Kipp, "DoH Preference + Hints for HTTP", Work in Progress, Internet-Draft, draft- + schinazi-httpbis-doh-preference-hints-02, 13 July 2020, + . + + [ECH] Rescorla, E., Oku, K., Sullivan, N., and C. A. Wood, "TLS + Encrypted Client Hello", Work in Progress, Internet-Draft, + draft-ietf-tls-esni-17, 9 October 2023, + . + + [RFC2132] Alexander, S. and R. Droms, "DHCP Options and BOOTP Vendor + Extensions", RFC 2132, DOI 10.17487/RFC2132, March 1997, + . + + [RFC6105] Levy-Abegnoli, E., Van de Velde, G., Popoviciu, C., and J. + Mohacsi, "IPv6 Router Advertisement Guard", RFC 6105, + DOI 10.17487/RFC6105, February 2011, + . + + [RFC8106] Jeong, J., Park, S., Beloeil, L., and S. Madanapalli, + "IPv6 Router Advertisement Options for DNS Configuration", + RFC 8106, DOI 10.17487/RFC8106, March 2017, + . + + [RFC8415] Mrugalski, T., Siodelski, M., Volz, B., Yourtchenko, A., + Richardson, M., Jiang, S., Lemon, T., and T. Winters, + "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)", + RFC 8415, DOI 10.17487/RFC8415, November 2018, + . + + [RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol + Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, + . + + [RFC8880] Cheshire, S. and D. Schinazi, "Special Use Domain Name + 'ipv4only.arpa'", RFC 8880, DOI 10.17487/RFC8880, August + 2020, . + +Appendix A. Rationale for Using a Special-Use Domain Name + + The "resolver.arpa" SUDN is similar to "ipv4only.arpa" in that the + querying client is not interested in an answer from the authoritative + "arpa" name servers. The intent of the SUDN is to allow clients to + communicate with the Unencrypted DNS Resolver much like + "ipv4only.arpa" allows for client-to-middlebox communication. For + more context, see [RFC8880] for the rationale behind "ipv4only.arpa". + +Appendix B. Rationale for Using SVCB Records + + These mechanisms use SVCB/HTTPS resource records [RFC9460] to + communicate that a given domain designates a particular Designated + Resolver for clients to use in place of an Unencrypted DNS Resolver + (using a SUDN) or another Encrypted DNS Resolver (using its domain + name). + + There are various other proposals for how to provide similar + functionality. There are several reasons that these mechanisms have + chosen SVCB records: + + * Discovering Encrypted DNS Resolvers using DNS records keeps client + logic for DNS self-contained and allows a DNS resolver operator to + define which resolver names and IP addresses are related to one + another. + + * Using DNS records also does not rely on bootstrapping with higher- + level application operations (such as those discussed in + [DoH-HINTS]). + + * SVCB records are extensible and allow the definition of parameter + keys, making them a superior mechanism for extensibility as + compared to approaches such as overloading TXT records. The same + keys can be used for discovering Designated Resolvers of different + transport types as well as those advertised by Unencrypted DNS + Resolvers or another Encrypted DNS Resolver. + + * Clients and servers that are interested in privacy of names will + already need to support SVCB records in order to use the TLS + Encrypted ClientHello [ECH]. Without encrypting names in TLS, the + value of encrypting DNS is reduced, so pairing the solutions + provides the greatest benefit. + +Authors' Addresses + + Tommy Pauly + Apple Inc. + One Apple Park Way + Cupertino, California 95014 + United States of America + Email: tpauly@apple.com + + + Eric Kinnear + Apple Inc. + One Apple Park Way + Cupertino, California 95014 + United States of America + Email: ekinnear@apple.com + + + Christopher A. Wood + Cloudflare + 101 Townsend St + San Francisco, California 94107 + United States of America + Email: caw@heapingbits.net + + + Patrick McManus + Fastly + Email: mcmanus@ducksong.com + + + Tommy Jensen + Microsoft + Email: tojens@microsoft.com -- cgit v1.2.3