From 4bfd864f10b68b71482b35c818559068ef8d5797 Mon Sep 17 00:00:00 2001 From: Thomas Voss Date: Wed, 27 Nov 2024 20:54:24 +0100 Subject: doc: Add RFC documents --- doc/rfc/rfc9559.txt | 8479 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 8479 insertions(+) create mode 100644 doc/rfc/rfc9559.txt (limited to 'doc/rfc/rfc9559.txt') diff --git a/doc/rfc/rfc9559.txt b/doc/rfc/rfc9559.txt new file mode 100644 index 0000000..8beb93f --- /dev/null +++ b/doc/rfc/rfc9559.txt @@ -0,0 +1,8479 @@ + + + + +Internet Engineering Task Force (IETF) S. Lhomme +Request for Comments: 9559 +Updates: 8794 M. Bunkus +Category: Standards Track +ISSN: 2070-1721 D. Rice + October 2024 + + + Matroska Media Container Format Specification + +Abstract + + This document defines the Matroska audiovisual data container + structure, including definitions of its structural elements, + terminology, vocabulary, and application. + + This document updates RFC 8794 to permit the use of a previously + reserved Extensible Binary Meta Language (EBML) Element ID. + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 7841. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + https://www.rfc-editor.org/info/rfc9559. + +Copyright Notice + + Copyright (c) 2024 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (https://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Revised BSD License text as described in Section 4.e of the + Trust Legal Provisions and are provided without warranty as described + in the Revised BSD License. + +Table of Contents + + 1. Introduction + 2. Status of This Document + 3. Notation and Conventions + 4. Matroska Overview + 4.1. Principles + 4.2. Updates to RFC 8794 + 4.3. Added EBML Constraints + 4.4. Design Rules + 4.5. Data Layout + 5. Matroska Schema + 5.1. Segment Element + 5.1.1. SeekHead Element + 5.1.1.1. Seek Element + 5.1.2. Info Element + 5.1.2.1. SegmentUUID Element + 5.1.2.2. SegmentFilename Element + 5.1.2.3. PrevUUID Element + 5.1.2.4. PrevFilename Element + 5.1.2.5. NextUUID Element + 5.1.2.6. NextFilename Element + 5.1.2.7. SegmentFamily Element + 5.1.2.8. ChapterTranslate Element + 5.1.2.9. TimestampScale Element + 5.1.2.10. Duration Element + 5.1.2.11. DateUTC Element + 5.1.2.12. Title Element + 5.1.2.13. MuxingApp Element + 5.1.2.14. WritingApp Element + 5.1.3. Cluster Element + 5.1.3.1. Timestamp Element + 5.1.3.2. Position Element + 5.1.3.3. PrevSize Element + 5.1.3.4. SimpleBlock Element + 5.1.3.5. BlockGroup Element + 5.1.4. Tracks Element + 5.1.4.1. TrackEntry Element + 5.1.5. Cues Element + 5.1.5.1. CuePoint Element + 5.1.6. Attachments Element + 5.1.6.1. AttachedFile Element + 5.1.7. Chapters Element + 5.1.7.1. EditionEntry Element + 5.1.8. Tags Element + 5.1.8.1. Tag Element + 6. Matroska Element Ordering + 6.1. Top-Level Elements + 6.2. CRC-32 + 6.3. SeekHead + 6.4. Cues (Index) + 6.5. Info + 6.6. Chapters Element + 6.7. Attachments + 6.8. Tags + 7. Matroska Versioning + 8. Stream Copy + 9. DefaultDecodedFieldDuration + 10. Cluster Blocks + 10.1. Block Structure + 10.2. SimpleBlock Structure + 10.3. Block Lacing + 10.3.1. No Lacing + 10.3.2. Xiph Lacing + 10.3.3. EBML Lacing + 10.3.4. Fixed-size Lacing + 10.3.5. Laced Frames Timestamp + 10.4. Random Access Points + 11. Timestamps + 11.1. Timestamp Ticks + 11.1.1. Matroska Ticks + 11.1.2. Segment Ticks + 11.1.3. Track Ticks + 11.2. Block Timestamps + 11.3. TimestampScale Rounding + 12. Language Codes + 13. Country Codes + 14. Encryption + 15. Image Presentation + 15.1. Cropping + 15.2. Rotation + 16. Segment Position + 16.1. Segment Position Exception + 16.2. Example of Segment Position + 17. Linked Segments + 17.1. Hard Linking + 17.2. Medium Linking + 17.2.1. Linked-Duration + 17.2.2. Linked-Edition + 18. Track Flags + 18.1. Default Flag + 18.2. Forced Flag + 18.3. Hearing-Impaired Flag + 18.4. Visual-Impaired Flag + 18.5. Descriptions Flag + 18.6. Original Flag + 18.7. Commentary Flag + 18.8. Track Operation + 18.9. Overlay Track + 18.10. Multi-planar and 3D Videos + 19. Default Track Selection + 19.1. Audio Selection + 19.2. Subtitle Selection + 20. Chapters + 20.1. EditionEntry + 20.1.1. EditionFlagDefault + 20.1.2. Default Edition + 20.1.3. EditionFlagOrdered + 20.1.3.1. Ordered-Edition and Matroska Segment Linking + 20.2. ChapterAtom + 20.2.1. ChapterTimeStart + 20.2.2. ChapterTimeEnd + 20.2.3. Nested Chapters + 20.2.4. Nested Chapters in Ordered Chapters + 20.2.5. ChapterFlagHidden + 20.3. Menu Features + 20.4. Physical Types + 20.5. Chapter Examples + 20.5.1. Example 1: Basic Chaptering + 20.5.2. Example 2: Nested Chapters + 20.5.2.1. The Micronauts "Bleep To Bleep" + 21. Attachments + 21.1. Cover Art + 21.2. Font Files + 22. Cues + 22.1. Recommendations + 23. Matroska Streaming + 23.1. File Access + 23.2. Livestreaming + 24. Tags + 24.1. Tags Precedence + 24.2. Tag Levels + 25. Implementation Recommendations + 25.1. Cluster + 25.2. SeekHead + 25.3. Optimum Layouts + 25.3.1. Optimum Layout for a Muxer + 25.3.2. Optimum Layout after Editing Tags + 25.3.3. Optimum Layout with Cues at the Front + 25.3.4. Optimum Layout for Livestreaming + 26. Security Considerations + 27. IANA Considerations + 27.1. Matroska Element IDs Registry + 27.2. Matroska Compression Algorithms Registry + 27.3. Matroska Encryption Algorithms Registry + 27.4. Matroska AES Cipher Modes Registry + 27.5. Matroska Content Encoding Scopes Registry + 27.6. Matroska Content Encoding Types Registry + 27.7. Matroska Stereo Modes Registry + 27.8. Matroska Alpha Modes Registry + 27.9. Matroska Display Units Registry + 27.10. Matroska Horizontal Chroma Sitings Registry + 27.11. Matroska Vertical Chroma Sitings Registry + 27.12. Matroska Color Ranges Registry + 27.13. Matroska Tags Target Types Registry + 27.14. Matroska Chapter Codec IDs Registry + 27.15. Matroska Projection Types Registry + 27.16. Matroska Track Types Registry + 27.17. Matroska Track Plane Types Registry + 27.18. Media Types + 27.18.1. For Files Containing Video Tracks + 27.18.2. For Files Containing Audio Tracks with No Video + Tracks + 27.18.3. For Files Containing a Stereoscopic Video Track + 28. References + 28.1. Normative References + 28.2. Informative References + Appendix A. Historic Deprecated Elements + A.1. SilentTracks Element + A.2. SilentTrackNumber Element + A.3. BlockVirtual Element + A.4. ReferenceVirtual Element + A.5. Slices Element + A.6. TimeSlice Element + A.7. LaceNumber Element + A.8. FrameNumber Element + A.9. BlockAdditionID Element + A.10. Delay Element + A.11. SliceDuration Element + A.12. ReferenceFrame Element + A.13. ReferenceOffset Element + A.14. ReferenceTimestamp Element + A.15. EncryptedBlock Element + A.16. MinCache Element + A.17. MaxCache Element + A.18. TrackOffset Element + A.19. CodecSettings Element + A.20. CodecInfoURL Element + A.21. CodecDownloadURL Element + A.22. CodecDecodeAll Element + A.23. TrackOverlay Element + A.24. AspectRatioType Element + A.25. GammaValue Element + A.26. FrameRate Element + A.27. ChannelPositions Element + A.28. TrickTrackUID Element + A.29. TrickTrackSegmentUID Element + A.30. TrickTrackFlag Element + A.31. TrickMasterTrackUID Element + A.32. TrickMasterTrackSegmentUID Element + A.33. ContentSignature Element + A.34. ContentSigKeyID Element + A.35. ContentSigAlgo Element + A.36. ContentSigHashAlgo Element + A.37. CueRefCluster Element + A.38. CueRefNumber Element + A.39. CueRefCodecState Element + A.40. FileReferral Element + A.41. FileUsedStartTime Element + A.42. FileUsedEndTime Element + A.43. TagDefaultBogus Element + Authors' Addresses + +1. Introduction + + Matroska is an audiovisual data container format. It was derived + from a project called [MCF] but diverges from it significantly + because it is based on EBML (Extensible Binary Meta Language) + [RFC8794], a binary derivative of XML. EBML provides significant + advantages in terms of future format extensibility, without breaking + file support in parsers reading the previous versions. + + To avoid any misunderstandings, it is essential to clarify exactly + what an audio/video container is: + + * It is NOT a video or audio compression format (codec). + + * It is an envelope in which there can be many audio, video, and + subtitles streams, allowing the user to store a complete movie or + CD in a single file. + + Matroska is designed with the future in mind. It incorporates + features such as: + + * Fast seeking in the file + + * Chapter entries + + * Full metadata (tags) support + + * Selectable subtitle/audio/video streams + + * Modularly expandable + + * Error resilience (can recover playback even when the stream is + damaged) + + * Streamable over the Internet and local networks (HTTP [RFC9110], + FTP [RFC0959], SMB [SMB-CIFS], etc.) + + * Menus (like menus that DVDs have [DVD-Video]) + +2. Status of This Document + + This document covers Matroska versions 1, 2, 3, and 4. Matroska + version 4 is the current version. Matroska versions 1 to 3 are no + longer maintained. No new elements are expected in files with + version numbers 1, 2, or 3. + +3. Notation and Conventions + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and + "OPTIONAL" in this document are to be interpreted as described in BCP + 14 [RFC2119] [RFC8174] when, and only when, they appear in all + capitals, as shown here. + + This document defines the following terms in order to define the + format and application of Matroska: + + Matroska: A multimedia container format based on EBML (Extensible + Binary Meta Language). + + Matroska Reader: A data parser that interprets the semantics of a + Matroska document and creates a way for programs to use Matroska. + + Matroska Player: A Matroska Reader with the primary purpose of + playing audiovisual files, including Matroska documents. + + Matroska Writer: A data writer that creates Matroska documents. + +4. Matroska Overview + +4.1. Principles + + Matroska is a Document Type of EBML. This specification is dependent + on the EBML specification [RFC8794]. For an understanding of + Matroska's EBML Schema, see in particular the sections of the EBML + specification that cover EBML Element Types (Section 7), EBML Schema + (Section 11.1), and EBML Structure (Section 3). + +4.2. Updates to RFC 8794 + + Because of an oversight, [RFC8794] reserved EBML ID 0x80, which is + used by deployed Matroska implementations. For this reason, this + specification updates [RFC8794] to make 0x80 a legal EBML ID. + Additionally, this specification makes the following updates: + + * Section 17.1 of [RFC8794] (per Erratum ID #7189 [Err7189]) + + OLD: + + | One-octet Element IDs MUST be between 0x81 and 0xFE. These items + | are valuable because they are short, and they need to be used for + | commonly repeated elements. Element IDs are to be allocated + | within this range according to the "RFC Required" policy + | [RFC8126]. + | + | The following one-octet Element IDs are RESERVED: 0xFF and 0x80. + + NEW: + + | One-octet Element IDs MUST be between 0x80 and 0xFE. These items + | are valuable because they are short, and they need to be used for + | commonly repeated elements. Element IDs are to be allocated + | within this range according to the "RFC Required" policy + | [RFC8126]. + | + | The following one-octet Element ID is RESERVED: 0xFF. + + * Section 5 of [RFC8794] (per Erratum ID #7191 [Err7191]) + + OLD: + + +=========================+================+=================+ + | Element ID Octet Length | Range of Valid | Number of Valid | + | | Element IDs | Element IDs | + +=========================+================+=================+ + | 1 | 0x81 - 0xFE | 126 | + +-------------------------+----------------+-----------------+ + + NEW: + + +=========================+================+=================+ + | Element ID Octet Length | Range of Valid | Number of Valid | + | | Element IDs | Element IDs | + +=========================+================+=================+ + | 1 | 0x80 - 0xFE | 127 | + +-------------------------+----------------+-----------------+ + +4.3. Added EBML Constraints + + As an EBML Document Type, Matroska adds the following constraints to + the EBML specification [RFC8794]: + + * The docType of the EBML Header MUST be "matroska". + + * The EBMLMaxIDLength of the EBML Header MUST be 4. + + * The EBMLMaxSizeLength of the EBML Header MUST be between 1 and 8, + inclusive. + +4.4. Design Rules + + The Root Element and all Top-Level Elements MUST use 4 octets for + their EBML Element ID -- i.e., Segment and direct children of + Segment. + + Legacy EBML/Matroska parsers did not handle Empty Elements properly; + elements were present in the file but had a length of 0. They always + assumed the value was 0 for integers/dates or 0x0p+0, the textual + expression of floats using the format in [ISO9899], no matter the + default value of the element that should have been used instead. + Therefore, Matroska Writers MUST NOT use EBML Empty Elements if the + element has a default value that is not 0 for integers/dates and + 0x0p+0 for floats. + + When adding new elements to Matroska, these rules apply: + + * A non-mandatory integer/date Element MUST NOT have a default value + other than 0. + + * A non-mandatory float Element MUST NOT have a default value other + than 0x0p+0. + + * A non-mandatory string Element MUST NOT have a default value, as + empty strings cannot be defined in the XML Schema. + +4.5. Data Layout + + A Matroska file MUST be composed of at least one EBML Document using + the Matroska Document Type. Each EBML Document MUST start with an + EBML Header and MUST be followed by the EBML Root Element, defined as + Segment in Matroska. Matroska defines several Top-Level Elements + that may occur within the Segment. + + As an example, a simple Matroska file consisting of a single EBML + Document could be represented like this: + + * EBML Header + * Segment + + A more complex Matroska file consisting of an EBML Stream (consisting + of two EBML Documents) could be represented like this: + + * EBML Header + * Segment + * EBML Header + * Segment + + The following diagram represents a simple Matroska file, comprised of + an EBML Document with an EBML Header, a Segment element (the Root + Element), and all eight Matroska Top-Level Elements. In the diagrams + in this section, horizontal spacing expresses a parent-child + relationship between Matroska elements (e.g., the Info element is + contained within the Segment element), whereas vertical alignment + represents the storage order within the file. + + +-------------+ + | EBML Header | + +---------------------------+ + | Segment | SeekHead | + | |-------------| + | | Info | + | |-------------| + | | Tracks | + | |-------------| + | | Chapters | + | |-------------| + | | Cluster | + | |-------------| + | | Cues | + | |-------------| + | | Attachments | + | |-------------| + | | Tags | + +---------------------------+ + + Figure 1: Basic Layout of a Matroska File + + The Matroska EBML Schema defines eight Top-Level Elements: + + * SeekHead (Section 6.3) + + * Info (Section 6.5) + + * Tracks (Section 18) + + * Chapters (Section 20) + + * Cluster (Section 10) + + * Cues (Section 22) + + * Attachments (Section 21) + + * Tags (Section 6.8) + + The SeekHead element (also known as MetaSeek) contains an index of + Top-Level Elements locations within the Segment. Use of the SeekHead + element is RECOMMENDED. Without a SeekHead element, a Matroska + parser would have to search the entire file to find all of the other + Top-Level Elements. This is due to Matroska's flexible ordering + requirements; for instance, it is acceptable for the Chapters element + to be stored after the Cluster element(s). + + +--------------------------------+ + | SeekHead | Seek | SeekID | + | | |--------------| + | | | SeekPosition | + +--------------------------------+ + + Figure 2: Representation of a SeekHead Element + + The Info element contains vital information for identifying the whole + Segment. This includes the title for the Segment, a randomly + generated unique identifier (UID), and the UID(s) of any linked + Segment elements. + + +-------------------------+ + | Info | SegmentUUID | + | |------------------| + | | SegmentFilename | + | |------------------| + | | PrevUUID | + | |------------------| + | | PrevFilename | + | |------------------| + | | NextUUID | + | |------------------| + | | NextFilename | + | |------------------| + | | SegmentFamily | + | |------------------| + | | ChapterTranslate | + | |------------------| + | | TimestampScale | + | |------------------| + | | Duration | + | |------------------| + | | DateUTC | + | |------------------| + | | Title | + | |------------------| + | | MuxingApp | + | |------------------| + | | WritingApp | + |-------------------------| + + Figure 3: Representation of an Info Element and Its Child Elements + + The Tracks element defines the technical details for each track and + can store the name, number, UID, language, and type (audio, video, + subtitles, etc.) of each track. For example, the Tracks element MAY + store information about the resolution of a video track or sample + rate of an audio track. + + The Tracks element MUST identify all the data needed by the codec to + decode the data of the specified track. However, the data required + is contingent on the codec used for the track. For example, a Track + element for uncompressed audio only requires the audio bit rate to be + present. A codec such as AC-3 would require that the CodecID element + be present for all tracks, as it is the primary way to identify which + codec to use to decode the track. + + +------------------------------------+ + | Tracks | TrackEntry | TrackNumber | + | | |--------------| + | | | TrackUID | + | | |--------------| + | | | TrackType | + | | |--------------| + | | | Name | + | | |--------------| + | | | Language | + | | |--------------| + | | | CodecID | + | | |--------------| + | | | CodecPrivate | + | | |--------------| + | | | CodecName | + | | |----------------------------------+ + | | | Video | FlagInterlaced | + | | | |-------------------| + | | | | FieldOrder | + | | | |-------------------| + | | | | StereoMode | + | | | |-------------------| + | | | | AlphaMode | + | | | |-------------------| + | | | | PixelWidth | + | | | |-------------------| + | | | | PixelHeight | + | | | |-------------------| + | | | | DisplayWidth | + | | | |-------------------| + | | | | DisplayHeight | + | | | |-------------------| + | | | | AspectRatioType | + | | | |-------------------| + | | | | Colour | + | | |----------------------------------| + | | | Audio | SamplingFrequency | + | | | |-------------------| + | | | | Channels | + | | | |-------------------| + | | | | BitDepth | + |--------------------------------------------------------| + + Figure 4: Representation of the Tracks Element and a Selection of Its + Descendant Elements + + The Chapters element lists all of the chapters. Chapters are a way + to set predefined points to jump to in video or audio. + + +-----------------------------------------+ + | Chapters | Edition | EditionUID | + | | Entry |--------------------| + | | | EditionFlagDefault | + | | |--------------------| + | | | EditionFlagOrdered | + | | |---------------------------------+ + | | | ChapterAtom | ChapterUID | + | | | |-------------------| + | | | | ChapterStringUID | + | | | |-------------------| + | | | | ChapterTimeStart | + | | | |-------------------| + | | | | ChapterTimeEnd | + | | | |-------------------| + | | | | ChapterFlagHidden | + | | | |-------------------------------+ + | | | | ChapterDisplay | ChapString | + | | | | |--------------| + | | | | | ChapLanguage | + +------------------------------------------------------------------+ + + Figure 5: Representation of the Chapters Element and a Selection + of Its Descendant Elements + + Cluster elements contain the content for each track, e.g., video + frames. A Matroska file SHOULD contain at least one Cluster element. + In the rare case it doesn't, there should be a method for Segments to + link together, possibly using Chapters; see Section 17. + + The Cluster element helps to break up SimpleBlock or BlockGroup + elements and helps with seeking and error protection. Every Cluster + element MUST contain a Timestamp element. This SHOULD be the + Timestamp element used to play the first Block in the Cluster + element, unless a different value is needed to accommodate for more + Blocks; see Section 11.2. + + Cluster elements contain one or more Block element, such as + BlockGroup or SimpleBlock elements. In some situations, a Cluster + element MAY contain no Block element, for example, in a live + recording when no data has been collected. + + A BlockGroup element MAY contain a Block of data and any information + relating directly to that Block. + + +--------------------------+ + | Cluster | Timestamp | + | |----------------| + | | Position | + | |----------------| + | | PrevSize | + | |----------------| + | | SimpleBlock | + | |----------------| + | | BlockGroup | + +--------------------------+ + + Figure 6: Representation of a Cluster Element and Its Immediate + Child Elements + + +----------------------------------+ + | Block | Portion of | Data Type | + | | a Block | - Bit Flag | + | |--------------------------+ + | | Header | TrackNumber | + | | |-------------| + | | | Timestamp | + | | |-------------| + | | | Flags | + | | | - Gap | + | | | - Lacing | + | | | - Reserved | + | |--------------------------| + | | Optional | FrameSize | + | |--------------------------| + | | Data | Frame | + +----------------------------------+ + + Figure 7: Representation of the Block Element Structure + + Each Cluster MUST contain exactly one Timestamp element. The + Timestamp element value MUST be stored once per Cluster. The + Timestamp element in the Cluster is relative to the entire Segment. + The Timestamp element SHOULD be the first element in the Cluster it + belongs to or the second element if that Cluster contains a CRC-32 + element (Section 6.2). + + Additionally, the Block contains an offset that, when added to the + Cluster's Timestamp element value, yields the Block's effective + timestamp. Therefore, the timestamp in the Block itself is relative + to the Timestamp element in the Cluster. For example, if the + Timestamp element in the Cluster is set to 10 seconds and a Block in + that Cluster is supposed to be played 12 seconds into the clip, the + timestamp in the Block would be set to 2 seconds. + + The ReferenceBlock in the BlockGroup is used instead of the basic + "P-frame"/"B-frame" description. Instead of simply saying that this + Block depends on the Block directly before or directly after, the + Timestamp of the necessary Block is used. Because there can be as + many ReferenceBlock elements as necessary for a Block, it allows for + some extremely complex referencing. + + The Cues element is used to seek when playing back a file by + providing a temporal index for some of the Tracks. It is similar to + the SeekHead element but is used for seeking to a specific time when + playing back the file. It is possible to seek without this element, + but it is much more difficult because a Matroska Reader would have to + "hunt and peck" through the file to look for the correct timestamp. + + The Cues element SHOULD contain at least one CuePoint element. Each + CuePoint element stores the position of the Cluster that contains the + BlockGroup or SimpleBlock element. The timestamp is stored in the + CueTime element, and the location is stored in the CueTrackPositions + element. + + The Cues element is flexible. For instance, the Cues element can be + used to index every single timestamp of every Block or they can be + indexed selectively. + + +-------------------------------------+ + | Cues | CuePoint | CueTime | + | | |-------------------| + | | | CueTrackPositions | + | |------------------------------| + | | CuePoint | CueTime | + | | |-------------------| + | | | CueTrackPositions | + +-------------------------------------+ + + Figure 8: Representation of a Cues Element and Two Levels of Its + Descendant Elements + + The Attachments element is for attaching files to a Matroska file, + such as pictures, fonts, web pages, etc. + + +------------------------------------------------+ + | Attachments | AttachedFile | FileDescription | + | | |-------------------| + | | | FileName | + | | |-------------------| + | | | FileMediaType | + | | |-------------------| + | | | FileData | + | | |-------------------| + | | | FileUID | + +------------------------------------------------+ + + Figure 9: Representation of an Attachments Element + + The Tags element contains metadata that describes the Segment and + potentially its Tracks, Chapters, and Attachments. Each Track or + Chapter that those tags applies to has its UID listed in the Tags. + The Tags contain all extra information about the file: scriptwriters, + singers, actors, directors, titles, edition, price, dates, genre, + comments, etc. Tags can contain their values in multiple languages. + For example, a movie's "TITLE" tag value might contain both the + original English title as well as the German title. + + +-------------------------------------------+ + | Tags | Tag | Targets | TargetTypeValue | + | | | |------------------| + | | | | TargetType | + | | | |------------------| + | | | | TagTrackUID | + | | | |------------------| + | | | | TagEditionUID | + | | | |------------------| + | | | | TagChapterUID | + | | | |------------------| + | | | | TagAttachmentUID | + | | |------------------------------| + | | | SimpleTag | TagName | + | | | |------------------| + | | | | TagLanguage | + | | | |------------------| + | | | | TagDefault | + | | | |------------------| + | | | | TagString | + | | | |------------------| + | | | | TagBinary | + | | | |------------------| + | | | | SimpleTag | + +-------------------------------------------+ + + Figure 10: Representation of a Tags Element and Three Levels of + Its Children Elements + +5. Matroska Schema + + This specification includes an EBML Schema that defines the elements + and structure of Matroska using the EBML Schema elements and + attributes defined in Section 11.1 of [RFC8794]. + + Attributes using their default value (like minOccurs, minver, etc.) + or attributes with undefined values (like length, maxver, etc.) are + omitted. + + The definitions for each Matroska element are provided below. + +5.1. Segment Element + + id / type: 0x18538067 / master + unknownsizeallowed: True + path: \Segment + minOccurs / maxOccurs: 1 / 1 + definition: The Root Element that contains all other Top-Level + Elements; see Section 4.5. + +5.1.1. SeekHead Element + + id / type: 0x114D9B74 / master + path: \Segment\SeekHead + maxOccurs: 2 + definition: Contains seeking information of Top-Level Elements; see + Section 4.5. + +5.1.1.1. Seek Element + + id / type: 0x4DBB / master + path: \Segment\SeekHead\Seek + minOccurs: 1 + definition: Contains a single seek entry to an EBML Element. + +5.1.1.1.1. SeekID Element + + id / type: 0x53AB / binary + length: 4 + path: \Segment\SeekHead\Seek\SeekID + minOccurs / maxOccurs: 1 / 1 + definition: The binary EBML ID of a Top-Level Element. + +5.1.1.1.2. SeekPosition Element + + id / type: 0x53AC / uinteger + path: \Segment\SeekHead\Seek\SeekPosition + minOccurs / maxOccurs: 1 / 1 + definition: The Segment Position (Section 16) of a Top-Level + Element. + +5.1.2. Info Element + + id / type: 0x1549A966 / master + path: \Segment\Info + minOccurs / maxOccurs: 1 / 1 + recurring: True + definition: Contains general information about the Segment. + +5.1.2.1. SegmentUUID Element + + id / type: 0x73A4 / binary + length: 16 + path: \Segment\Info\SegmentUUID + maxOccurs: 1 + definition: A randomly generated UID that identifies the Segment + amongst many others (128 bits). It is equivalent to a Universally + Unique Identifier (UUID) v4 [RFC9562] with all bits randomly (or + pseudorandomly) chosen. An actual UUID v4 value, where some bits + are not random, MAY also be used. + usage notes: If the Segment is a part of a Linked Segment, then this + element is REQUIRED. The value of the UID MUST contain at least + one bit set to 1. + +5.1.2.2. SegmentFilename Element + + id / type: 0x7384 / utf-8 + path: \Segment\Info\SegmentFilename + maxOccurs: 1 + definition: A filename corresponding to this Segment. + +5.1.2.3. PrevUUID Element + + id / type: 0x3CB923 / binary + length: 16 + path: \Segment\Info\PrevUUID + maxOccurs: 1 + definition: An ID that identifies the previous Segment of a Linked + Segment. + usage notes: If the Segment is a part of a Linked Segment that uses + Hard Linking (Section 17.1), then either the PrevUUID or the + NextUUID element is REQUIRED. If a Segment contains a PrevUUID + but not a NextUUID, then it MAY be considered as the last Segment + of the Linked Segment. The PrevUUID MUST NOT be equal to the + SegmentUUID. + +5.1.2.4. PrevFilename Element + + id / type: 0x3C83AB / utf-8 + path: \Segment\Info\PrevFilename + maxOccurs: 1 + definition: A filename corresponding to the file of the previous + Linked Segment. + usage notes: Provision of the previous filename is for display + convenience, but PrevUUID SHOULD be considered authoritative for + identifying the previous Segment in a Linked Segment. + +5.1.2.5. NextUUID Element + + id / type: 0x3EB923 / binary + length: 16 + path: \Segment\Info\NextUUID + maxOccurs: 1 + definition: An ID that identifies the next Segment of a Linked + Segment. + usage notes: If the Segment is a part of a Linked Segment that uses + Hard Linking (Section 17.1), then either the PrevUUID or the + NextUUID element is REQUIRED. If a Segment contains a NextUUID + but not a PrevUUID, then it MAY be considered as the first Segment + of the Linked Segment. The NextUUID MUST NOT be equal to the + SegmentUUID. + +5.1.2.6. NextFilename Element + + id / type: 0x3E83BB / utf-8 + path: \Segment\Info\NextFilename + maxOccurs: 1 + definition: A filename corresponding to the file of the next Linked + Segment. + usage notes: Provision of the next filename is for display + convenience, but NextUUID SHOULD be considered authoritative for + identifying the Next Segment. + +5.1.2.7. SegmentFamily Element + + id / type: 0x4444 / binary + length: 16 + path: \Segment\Info\SegmentFamily + definition: A UID that all Segments of a Linked Segment MUST share + (128 bits). It is equivalent to a UUID v4 [RFC9562] with all bits + randomly (or pseudorandomly) chosen. An actual UUID v4 value, + where some bits are not random, MAY also be used. + usage notes: If the Segment Info contains a ChapterTranslate + element, this element is REQUIRED. + +5.1.2.8. ChapterTranslate Element + + id / type: 0x6924 / master + path: \Segment\Info\ChapterTranslate + definition: The mapping between this Segment and a segment value in + the given Chapter Codec. + rationale: Chapter Codecs may need to address different segments, + but they may not know of the way to identify such segments when + stored in Matroska. This element and its child elements add a way + to map the internal segments known to the Chapter Codec to the + SegmentUUIDs in Matroska. This allows remuxing a file with + Chapter Codec without changing the content of the codec data, just + the Segment mapping. + +5.1.2.8.1. ChapterTranslateID Element + + id / type: 0x69A5 / binary + path: \Segment\Info\ChapterTranslate\ChapterTranslateID + minOccurs / maxOccurs: 1 / 1 + definition: The binary value used to represent this Segment in the + chapter codec data. The format depends on the ChapProcessCodecID + used; see Section 5.1.7.1.4.15. + +5.1.2.8.2. ChapterTranslateCodec Element + + id / type: 0x69BF / uinteger + path: \Segment\Info\ChapterTranslate\ChapterTranslateCodec + minOccurs / maxOccurs: 1 / 1 + definition: Applies to the chapter codec of the given chapter + edition(s); see Section 5.1.7.1.4.15. + defined values: See Table 31. Additional values can be registered + in the "Matroska Chapter Codec IDs" registry defined in + Section 27.14. + +5.1.2.8.3. ChapterTranslateEditionUID Element + + id / type: 0x69FC / uinteger + path: \Segment\Info\ChapterTranslate\ChapterTranslateEditionUID + definition: Specifies a chapter edition UID to which this + ChapterTranslate applies. + usage notes: When no ChapterTranslateEditionUID is specified in the + ChapterTranslate, the ChapterTranslate applies to all chapter + editions found in the Segment using the given + ChapterTranslateCodec. + +5.1.2.9. TimestampScale Element + + id / type / default: 0x2AD7B1 / uinteger / 1000000 + range: not 0 (1-18446744073709551615) + path: \Segment\Info\TimestampScale + minOccurs / maxOccurs: 1 / 1 + definition: Base unit for Segment Ticks and Track Ticks, in + nanoseconds. A TimestampScale value of 1000000 means scaled + timestamps in the Segment are expressed in milliseconds; see + Section 11 on how to interpret timestamps. + +5.1.2.10. Duration Element + + id / type: 0x4489 / float + range: > 0x0p+0 + path: \Segment\Info\Duration + maxOccurs: 1 + definition: Duration of the Segment, expressed in Segment Ticks, + which are based on TimestampScale; see Section 11.1. + +5.1.2.11. DateUTC Element + + id / type: 0x4461 / date + path: \Segment\Info\DateUTC + maxOccurs: 1 + definition: The date and time that the Segment was created by the + muxing application or library. + +5.1.2.12. Title Element + + id / type: 0x7BA9 / utf-8 + path: \Segment\Info\Title + maxOccurs: 1 + definition: General name of the Segment. + +5.1.2.13. MuxingApp Element + + id / type: 0x4D80 / utf-8 + path: \Segment\Info\MuxingApp + minOccurs / maxOccurs: 1 / 1 + definition: Muxing application or library (example: "libmatroska- + 0.4.3"). + usage notes: Include the full name of the application or library + followed by the version number. + +5.1.2.14. WritingApp Element + + id / type: 0x5741 / utf-8 + path: \Segment\Info\WritingApp + minOccurs / maxOccurs: 1 / 1 + definition: Writing application (example: "mkvmerge-0.3.3"). + usage notes: Include the full name of the application followed by + the version number. + +5.1.3. Cluster Element + + id / type: 0x1F43B675 / master + unknownsizeallowed: True + path: \Segment\Cluster + definition: The Top-Level Element containing the (monolithic) Block + structure. + +5.1.3.1. Timestamp Element + + id / type: 0xE7 / uinteger + path: \Segment\Cluster\Timestamp + minOccurs / maxOccurs: 1 / 1 + definition: Absolute timestamp of the cluster, expressed in Segment + Ticks, which are based on TimestampScale; see Section 11.1. + usage notes: This element SHOULD be the first child element of the + Cluster it belongs to or the second if that Cluster contains a + CRC-32 element (Section 6.2). + +5.1.3.2. Position Element + + id / type: 0xA7 / uinteger + path: \Segment\Cluster\Position + maxOccurs: 1 + maxver: 4 + definition: The Segment Position of the Cluster in the Segment (0 in + live streams). It might help to resynchronize the offset on + damaged streams. + +5.1.3.3. PrevSize Element + + id / type: 0xAB / uinteger + path: \Segment\Cluster\PrevSize + maxOccurs: 1 + definition: Size of the previous Cluster, in octets. Can be useful + for backward playing. + +5.1.3.4. SimpleBlock Element + + id / type: 0xA3 / binary + path: \Segment\Cluster\SimpleBlock + minver: 2 + definition: Similar to Block (see Section 10.1) but without all the + extra information. Mostly used to reduce overhead when no extra + feature is needed; see Section 10.2 on SimpleBlock Structure. + +5.1.3.5. BlockGroup Element + + id / type: 0xA0 / master + path: \Segment\Cluster\BlockGroup + definition: Basic container of information containing a single Block + and information specific to that Block. + +5.1.3.5.1. Block Element + + id / type: 0xA1 / binary + path: \Segment\Cluster\BlockGroup\Block + minOccurs / maxOccurs: 1 / 1 + definition: Block containing the actual data to be rendered and a + timestamp relative to the Cluster Timestamp; see Section 10.1 on + Block Structure. + +5.1.3.5.2. BlockAdditions Element + + id / type: 0x75A1 / master + path: \Segment\Cluster\BlockGroup\BlockAdditions + maxOccurs: 1 + definition: Contains additional binary data to complete the Block + element; see Section 4.1.5 of [MatroskaCodec] for more + information. An EBML parser that has no knowledge of the Block + structure could still see and use/skip these data. + +5.1.3.5.2.1. BlockMore Element + + id / type: 0xA6 / master + path: \Segment\Cluster\BlockGroup\BlockAdditions\BlockMore + minOccurs: 1 + definition: Contains the BlockAdditional and some parameters. + +5.1.3.5.2.2. BlockAdditional Element + + id / type: 0xA5 / binary + path: \Segment\Cluster\BlockGroup\BlockAdditions\BlockMore\BlockAddi + tional + minOccurs / maxOccurs: 1 / 1 + definition: Interpreted by the codec as it wishes (using the + BlockAddID). + +5.1.3.5.2.3. BlockAddID Element + + id / type / default: 0xEE / uinteger / 1 + range: not 0 (1-18446744073709551615) + path: \Segment\Cluster\BlockGroup\BlockAdditions\BlockMore\BlockAddI + D + minOccurs / maxOccurs: 1 / 1 + definition: An ID that identifies how to interpret the + BlockAdditional data; see Section 4.1.5 of [MatroskaCodec] for + more information. A value of 1 indicates that the BlockAdditional + data is defined by the codec. Any other value indicates that the + BlockAdditional data should be handled according to the + BlockAddIDType that is located in the TrackEntry. + usage notes: Each BlockAddID value MUST be unique between all + BlockMore elements found in a BlockAdditions element. To keep + MaxBlockAdditionID as low as possible, small values SHOULD be + used. + +5.1.3.5.3. BlockDuration Element + + id / type: 0x9B / uinteger + path: \Segment\Cluster\BlockGroup\BlockDuration + minOccurs / maxOccurs: See Table 1 / 1 + definition: The duration of the Block, expressed in Track Ticks; see + Section 11.1. The BlockDuration element can be useful at the end + of a Track to define the duration of the last frame (as there is + no subsequent Block available) or when there is a break in a track + like for subtitle tracks. + notes: See Table 1. + + +===========+==================================================+ + | attribute | note | + +===========+==================================================+ + | minOccurs | BlockDuration MUST be set (minOccurs=1) if the | + | | associated TrackEntry stores a DefaultDuration | + | | value. | + +-----------+--------------------------------------------------+ + | default | If a value is not present and no DefaultDuration | + | | is defined, the value is assumed to be the | + | | difference between the timestamp of this Block | + | | and the timestamp of the next Block in "display" | + | | order (not coding order). | + +-----------+--------------------------------------------------+ + + Table 1: BlockDuration Implementation Notes + +5.1.3.5.4. ReferencePriority Element + + id / type / default: 0xFA / uinteger / 0 + path: \Segment\Cluster\BlockGroup\ReferencePriority + minOccurs / maxOccurs: 1 / 1 + definition: This frame is referenced and has the specified cache + priority. In the cache, only a frame of the same or higher + priority can replace this frame. A value of 0 means the frame is + not referenced. + +5.1.3.5.5. ReferenceBlock Element + + id / type: 0xFB / integer + path: \Segment\Cluster\BlockGroup\ReferenceBlock + definition: A timestamp value, relative to the timestamp of the + Block in this BlockGroup, expressed in Track Ticks; see + Section 11.1. This is used to reference other frames necessary to + decode this frame. The relative value SHOULD correspond to a + valid Block that this Block depends on. Historically, Matroska + Writers didn't write the actual Block(s) that this Block depends + on, but they did write _some_ Block(s) in the past. + + The value "0" MAY also be used to signify that this Block cannot be + decoded on its own, but the necessary reference Block(s) is unknown. + In this case, other ReferenceBlock elements MUST NOT be found in the + same BlockGroup. If the BlockGroup doesn't have a ReferenceBlock + element, then the Block it contains can be decoded without using any + other Block data. + +5.1.3.5.6. CodecState Element + + id / type: 0xA4 / binary + path: \Segment\Cluster\BlockGroup\CodecState + maxOccurs: 1 + minver: 2 + definition: The new codec state to use. Data interpretation is + private to the codec. This information SHOULD always be + referenced by a seek entry. + +5.1.3.5.7. DiscardPadding Element + + id / type: 0x75A2 / integer + path: \Segment\Cluster\BlockGroup\DiscardPadding + maxOccurs: 1 + minver: 4 + definition: Duration of the silent data added to the Block, + expressed in Matroska Ticks -- i.e., in nanoseconds; see + Section 11.1 (padding at the end of the Block for positive values + and at the beginning of the Block for negative values). The + duration of DiscardPadding is not calculated in the duration of + the TrackEntry and SHOULD be discarded during playback. + +5.1.4. Tracks Element + + id / type: 0x1654AE6B / master + path: \Segment\Tracks + maxOccurs: 1 + recurring: True + definition: A Top-Level Element of information with many tracks + described. + +5.1.4.1. TrackEntry Element + + id / type: 0xAE / master + path: \Segment\Tracks\TrackEntry + minOccurs: 1 + definition: Describes a track with all elements. + +5.1.4.1.1. TrackNumber Element + + id / type: 0xD7 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\TrackNumber + minOccurs / maxOccurs: 1 / 1 + definition: The track number as used in the Block Header. + +5.1.4.1.2. TrackUID Element + + id / type: 0x73C5 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\TrackUID + minOccurs / maxOccurs: 1 / 1 + definition: A UID that identifies the Track. + stream copy: True (Section 8) + +5.1.4.1.3. TrackType Element + + id / type: 0x83 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\TrackType + minOccurs / maxOccurs: 1 / 1 + definition: The TrackType defines the type of each frame found in + the Track. The value SHOULD be stored on 1 octet. + defined values: See Table 2. Additional values can be registered in + the "Matroska Track Types" registry defined in Section 27.16. + stream copy: True (Section 8) + + +=======+==========+==========================================+ + | value | label | contents of each frame | + +=======+==========+==========================================+ + | 1 | video | An image. | + +-------+----------+------------------------------------------+ + | 2 | audio | Audio samples. | + +-------+----------+------------------------------------------+ + | 3 | complex | A mix of different other TrackType. The | + | | | codec needs to define how the Matroska | + | | | Player should interpret such data. | + +-------+----------+------------------------------------------+ + | 16 | logo | An image to be rendered over the video | + | | | track(s). | + +-------+----------+------------------------------------------+ + | 17 | subtitle | Subtitle or closed caption data to be | + | | | rendered over the video track(s). | + +-------+----------+------------------------------------------+ + | 18 | buttons | Interactive button(s) to be rendered | + | | | over the video track(s). | + +-------+----------+------------------------------------------+ + | 32 | control | Metadata used to control the player of | + | | | the Matroska Player. | + +-------+----------+------------------------------------------+ + | 33 | metadata | Timed metadata that can be passed on to | + | | | the Matroska Player. | + +-------+----------+------------------------------------------+ + + Table 2: TrackType Values + +5.1.4.1.4. FlagEnabled Element + + id / type / default: 0xB9 / uinteger / 1 + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagEnabled + minOccurs / maxOccurs: 1 / 1 + minver: 2 + definition: Set to 1 if the track is usable. It is possible to turn + a track that is not usable into a usable track using chapter + codecs or control tracks. + +5.1.4.1.5. FlagDefault Element + + id / type / default: 0x88 / uinteger / 1 + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagDefault + minOccurs / maxOccurs: 1 / 1 + definition: Set to 1 if the track (audio, video, or subtitles) is + eligible for automatic selection by the player; see Section 19 for + more details. + +5.1.4.1.6. FlagForced Element + + id / type / default: 0x55AA / uinteger / 0 + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagForced + minOccurs / maxOccurs: 1 / 1 + definition: Applies only to subtitles. Set to 1 if the track is + eligible for automatic selection by the player if it matches the + user's language preference, even if the user's preferences would + not normally enable subtitles with the selected audio track; this + can be used for tracks containing only translations of audio in + foreign languages or on-screen text. See Section 19 for more + details. + +5.1.4.1.7. FlagHearingImpaired Element + + id / type: 0x55AB / uinteger + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagHearingImpaired + maxOccurs: 1 + minver: 4 + definition: Set to 1 if and only if the track is suitable for users + with hearing impairments. + +5.1.4.1.8. FlagVisualImpaired Element + + id / type: 0x55AC / uinteger + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagVisualImpaired + maxOccurs: 1 + minver: 4 + definition: Set to 1 if and only if the track is suitable for users + with visual impairments. + +5.1.4.1.9. FlagTextDescriptions Element + + id / type: 0x55AD / uinteger + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagTextDescriptions + maxOccurs: 1 + minver: 4 + definition: Set to 1 if and only if the track contains textual + descriptions of video content. + +5.1.4.1.10. FlagOriginal Element + + id / type: 0x55AE / uinteger + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagOriginal + maxOccurs: 1 + minver: 4 + definition: Set to 1 if and only if the track is in the content's + original language. + +5.1.4.1.11. FlagCommentary Element + + id / type: 0x55AF / uinteger + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagCommentary + maxOccurs: 1 + minver: 4 + definition: Set to 1 if and only if the track contains commentary. + +5.1.4.1.12. FlagLacing Element + + id / type / default: 0x9C / uinteger / 1 + range: 0-1 + path: \Segment\Tracks\TrackEntry\FlagLacing + minOccurs / maxOccurs: 1 / 1 + definition: Set to 1 if the track MAY contain blocks that use + lacing. When set to 0, all blocks MUST have their lacing flags + set to "no lacing"; see Section 10.3 on 'Block' Lacing. + +5.1.4.1.13. DefaultDuration Element + + id / type: 0x23E383 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\DefaultDuration + maxOccurs: 1 + definition: Number of nanoseconds per frame, expressed in Matroska + Ticks -- i.e., in nanoseconds; see Section 11.1 ("frame" in the + Matroska sense -- one element put into a (Simple)Block). + stream copy: True (Section 8) + +5.1.4.1.14. DefaultDecodedFieldDuration Element + + id / type: 0x234E7A / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\DefaultDecodedFieldDuration + maxOccurs: 1 + minver: 4 + definition: The period between two successive fields at the output + of the decoding process, expressed in Matroska Ticks -- i.e., in + nanoseconds; see Section 11.1. See Section 9 for more + information. + stream copy: True (Section 8) + +5.1.4.1.15. TrackTimestampScale Element + + id / type / default: 0x23314F / float / 0x1p+0 + range: > 0x0p+0 + path: \Segment\Tracks\TrackEntry\TrackTimestampScale + minOccurs / maxOccurs: 1 / 1 + maxver: 3 + definition: The scale to apply on this track to work at normal speed + in relation with other tracks (mostly used to adjust video speed + when the audio length differs). + stream copy: True (Section 8) + +5.1.4.1.16. MaxBlockAdditionID Element + + id / type / default: 0x55EE / uinteger / 0 + path: \Segment\Tracks\TrackEntry\MaxBlockAdditionID + minOccurs / maxOccurs: 1 / 1 + definition: The maximum value of BlockAddID (Section 5.1.3.5.2.3). + A value of 0 means there is no BlockAdditions (Section 5.1.3.5.2) + for this track. + +5.1.4.1.17. BlockAdditionMapping Element + + id / type: 0x41E4 / master + path: \Segment\Tracks\TrackEntry\BlockAdditionMapping + minver: 4 + definition: Contains elements that extend the track format by adding + content either to each frame, with BlockAddID + (Section 5.1.3.5.2.3), or to the track as a whole with + BlockAddIDExtraData. + +5.1.4.1.17.1. BlockAddIDValue Element + + id / type: 0x41F0 / uinteger + range: >=2 + path: \Segment\Tracks\TrackEntry\BlockAdditionMapping\BlockAddIDValu + e + maxOccurs: 1 + minver: 4 + definition: If the track format extension needs content beside + frames, the value refers to the BlockAddID (Section 5.1.3.5.2.3) + value being described. + usage notes: To keep MaxBlockAdditionID as low as possible, small + values SHOULD be used. + +5.1.4.1.17.2. BlockAddIDName Element + + id / type: 0x41A4 / string + path: \Segment\Tracks\TrackEntry\BlockAdditionMapping\BlockAddIDName + maxOccurs: 1 + minver: 4 + definition: A human-friendly name describing the type of + BlockAdditional data, as defined by the associated Block + Additional Mapping. + +5.1.4.1.17.3. BlockAddIDType Element + + id / type / default: 0x41E7 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\BlockAdditionMapping\BlockAddIDType + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: Stores the registered identifier of the Block Additional + Mapping to define how the BlockAdditional data should be handled. + usage notes: If BlockAddIDType is 0, the BlockAddIDValue and + corresponding BlockAddID values MUST be 1. + +5.1.4.1.17.4. BlockAddIDExtraData Element + + id / type: 0x41ED / binary + path: \Segment\Tracks\TrackEntry\BlockAdditionMapping\BlockAddIDExtr + aData + maxOccurs: 1 + minver: 4 + definition: Extra binary data that the BlockAddIDType can use to + interpret the BlockAdditional data. The interpretation of the + binary data depends on the BlockAddIDType value and the + corresponding Block Additional Mapping. + +5.1.4.1.18. Name Element + + id / type: 0x536E / utf-8 + path: \Segment\Tracks\TrackEntry\Name + maxOccurs: 1 + definition: A human-readable track name. + +5.1.4.1.19. Language Element + + id / type / default: 0x22B59C / string / eng + path: \Segment\Tracks\TrackEntry\Language + minOccurs / maxOccurs: 1 / 1 + definition: The language of the track, in the Matroska languages + form; see Section 12 on language codes. This element MUST be + ignored if the LanguageBCP47 element is used in the same + TrackEntry. + +5.1.4.1.20. LanguageBCP47 Element + + id / type: 0x22B59D / string + path: \Segment\Tracks\TrackEntry\LanguageBCP47 + maxOccurs: 1 + minver: 4 + definition: The language of the track, in the form defined in + [RFC5646]; see Section 12 on language codes. If this element is + used, then any Language elements used in the same TrackEntry MUST + be ignored. + +5.1.4.1.21. CodecID Element + + id / type: 0x86 / string + path: \Segment\Tracks\TrackEntry\CodecID + minOccurs / maxOccurs: 1 / 1 + definition: An ID corresponding to the codec; see [MatroskaCodec] + for more info. + stream copy: True (Section 8) + +5.1.4.1.22. CodecPrivate Element + + id / type: 0x63A2 / binary + path: \Segment\Tracks\TrackEntry\CodecPrivate + maxOccurs: 1 + definition: Private data only known to the codec. + stream copy: True (Section 8) + +5.1.4.1.23. CodecName Element + + id / type: 0x258688 / utf-8 + path: \Segment\Tracks\TrackEntry\CodecName + maxOccurs: 1 + definition: A human-readable string specifying the codec. + +5.1.4.1.24. AttachmentLink Element + + id / type: 0x7446 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\AttachmentLink + maxOccurs: 1 + maxver: 3 + definition: The UID of an attachment that is used by this codec. + usage notes: The value MUST match the FileUID value of an attachment + found in this Segment. + +5.1.4.1.25. CodecDelay Element + + id / type / default: 0x56AA / uinteger / 0 + path: \Segment\Tracks\TrackEntry\CodecDelay + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: The built-in delay for the codec, expressed in Matroska + Ticks -- i.e., in nanoseconds; see Section 11.1. It represents + the number of codec samples that will be discarded by the decoder + during playback. This timestamp value MUST be subtracted from + each frame timestamp in order to get the timestamp that will be + actually played. The value SHOULD be small so the muxing of + tracks with the same actual timestamp are in the same Cluster. + stream copy: True (Section 8) + +5.1.4.1.26. SeekPreRoll Element + + id / type / default: 0x56BB / uinteger / 0 + path: \Segment\Tracks\TrackEntry\SeekPreRoll + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: After a discontinuity, the duration of the data that the + decoder MUST decode before the decoded data is valid, expressed in + Matroska Ticks -- i.e., in nanoseconds; see Section 11.1. + stream copy: True (Section 8) + +5.1.4.1.27. TrackTranslate Element + + id / type: 0x6624 / master + path: \Segment\Tracks\TrackEntry\TrackTranslate + definition: The mapping between this TrackEntry and a track value in + the given Chapter Codec. + rationale: Chapter Codecs may need to address content in a specific + track, but they may not know of the way to identify tracks in + Matroska. This element and its child elements add a way to map + the internal tracks known to the Chapter Codec to the track IDs in + Matroska. This allows remuxing a file with Chapter Codec without + changing the content of the codec data, just the track mapping. + +5.1.4.1.27.1. TrackTranslateTrackID Element + + id / type: 0x66A5 / binary + path: \Segment\Tracks\TrackEntry\TrackTranslate\TrackTranslateTrackI + D + minOccurs / maxOccurs: 1 / 1 + definition: The binary value used to represent this TrackEntry in + the chapter codec data. The format depends on the + ChapProcessCodecID used; see Section 5.1.7.1.4.15. + +5.1.4.1.27.2. TrackTranslateCodec Element + + id / type: 0x66BF / uinteger + path: \Segment\Tracks\TrackEntry\TrackTranslate\TrackTranslateCodec + minOccurs / maxOccurs: 1 / 1 + definition: Applies to the chapter codec of the given chapter + edition(s); see Section 5.1.7.1.4.15. + defined values: See Table 31. Additional values can be registered + in the "Matroska Chapter Codec IDs" registry defined in + Section 27.14. + +5.1.4.1.27.3. TrackTranslateEditionUID Element + + id / type: 0x66FC / uinteger + path: \Segment\Tracks\TrackEntry\TrackTranslate\TrackTranslateEditio + nUID + definition: Specifies a chapter edition UID to which this + TrackTranslate applies. + usage notes: When no TrackTranslateEditionUID is specified in the + TrackTranslate, the TrackTranslate applies to all chapter editions + found in the Segment using the given TrackTranslateCodec. + +5.1.4.1.28. Video Element + + id / type: 0xE0 / master + path: \Segment\Tracks\TrackEntry\Video + maxOccurs: 1 + definition: Video settings. + +5.1.4.1.28.1. FlagInterlaced Element + + id / type / default: 0x9A / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\FlagInterlaced + minOccurs / maxOccurs: 1 / 1 + minver: 2 + definition: Specifies whether the video frames in this track are + interlaced. + restrictions: See Table 3. + stream copy: True (Section 8) + + +=======+==============+==========================+ + | value | label | definition | + +=======+==============+==========================+ + | 0 | undetermined | Unknown status. This | + | | | value SHOULD be avoided. | + +-------+--------------+--------------------------+ + | 1 | interlaced | Interlaced frames. | + +-------+--------------+--------------------------+ + | 2 | progressive | No interlacing. | + +-------+--------------+--------------------------+ + + Table 3: FlagInterlaced Values + +5.1.4.1.28.2. FieldOrder Element + + id / type / default: 0x9D / uinteger / 2 + path: \Segment\Tracks\TrackEntry\Video\FieldOrder + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: Specifies the field ordering of video frames in this + track. + restrictions: See Table 4. + usage notes: If FlagInterlaced is not set to 1, this element MUST be + ignored. + stream copy: True (Section 8) + + +=======+===============+=========================================+ + | value | label | definition | + +=======+===============+=========================================+ + | 0 | progressive | Interlaced frames. This value SHOULD | + | | | be avoided; setting FlagInterlaced to 2 | + | | | is sufficient. | + +-------+---------------+-----------------------------------------+ + | 1 | tff | Top field displayed first. Top field | + | | | stored first. | + +-------+---------------+-----------------------------------------+ + | 2 | undetermined | Unknown field order. This value SHOULD | + | | | be avoided. | + +-------+---------------+-----------------------------------------+ + | 6 | bff | Bottom field displayed first. Bottom | + | | | field stored first. | + +-------+---------------+-----------------------------------------+ + | 9 | tff | Top field displayed first. Fields are | + | | (interleaved) | interleaved in storage with the top | + | | | line of the top field stored first. | + +-------+---------------+-----------------------------------------+ + | 14 | bff | Bottom field displayed first. Fields | + | | (interleaved) | are interleaved in storage with the top | + | | | line of the top field stored first. | + +-------+---------------+-----------------------------------------+ + + Table 4: FieldOrder Values + +5.1.4.1.28.3. StereoMode Element + + id / type / default: 0x53B8 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\StereoMode + minOccurs / maxOccurs: 1 / 1 + minver: 3 + definition: Stereo-3D video mode. See Section 18.10 for more + details. + defined values: See Table 5. Additional values can be registered in + the "Matroska Stereo Modes" registry defined in Section 27.7. + stream copy: True (Section 8) + + +=======+===================================================+ + | value | label | + +=======+===================================================+ + | 0 | mono | + +-------+---------------------------------------------------+ + | 1 | side by side (left eye first) | + +-------+---------------------------------------------------+ + | 2 | top - bottom (right eye is first) | + +-------+---------------------------------------------------+ + | 3 | top - bottom (left eye is first) | + +-------+---------------------------------------------------+ + | 4 | checkboard (right eye is first) | + +-------+---------------------------------------------------+ + | 5 | checkboard (left eye is first) | + +-------+---------------------------------------------------+ + | 6 | row interleaved (right eye is first) | + +-------+---------------------------------------------------+ + | 7 | row interleaved (left eye is first) | + +-------+---------------------------------------------------+ + | 8 | column interleaved (right eye is first) | + +-------+---------------------------------------------------+ + | 9 | column interleaved (left eye is first) | + +-------+---------------------------------------------------+ + | 10 | anaglyph (cyan/red) | + +-------+---------------------------------------------------+ + | 11 | side by side (right eye first) | + +-------+---------------------------------------------------+ + | 12 | anaglyph (green/magenta) | + +-------+---------------------------------------------------+ + | 13 | both eyes laced in one Block (left eye is first) | + +-------+---------------------------------------------------+ + | 14 | both eyes laced in one Block (right eye is first) | + +-------+---------------------------------------------------+ + + Table 5: StereoMode Values + +5.1.4.1.28.4. AlphaMode Element + + id / type / default: 0x53C0 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\AlphaMode + minOccurs / maxOccurs: 1 / 1 + minver: 3 + definition: Indicates whether the BlockAdditional element with + BlockAddID of "1" contains Alpha data as defined by the Codec + Mapping for the CodecID. Undefined values (i.e., values other + than 0 or 1) SHOULD NOT be used, as the behavior of known + implementations is different. + defined values: See Table 6. Additional values can be registered in + the "Matroska Alpha Modes" registry defined in Section 27.8. + stream copy: True (Section 8) + + +=======+=========+============================================+ + | value | label | definition | + +=======+=========+============================================+ + | 0 | none | The BlockAdditional element with | + | | | BlockAddID of "1" does not exist or SHOULD | + | | | NOT be considered as containing such data. | + +-------+---------+--------------------------------------------+ + | 1 | present | The BlockAdditional element with | + | | | BlockAddID of "1" contains alpha channel | + | | | data. | + +-------+---------+--------------------------------------------+ + + Table 6: AlphaMode Values + +5.1.4.1.28.5. OldStereoMode Element + + id / type: 0x53B9 / uinteger + path: \Segment\Tracks\TrackEntry\Video\OldStereoMode + maxOccurs: 1 + maxver: 2 + definition: Bogus StereoMode value used in old versions of + [libmatroska]. + restrictions: See Table 7. + usage notes: This element MUST NOT be used. It was an incorrect + value used in libmatroska up to 0.9.0. + + +=======+===========+ + | value | label | + +=======+===========+ + | 0 | mono | + +-------+-----------+ + | 1 | right eye | + +-------+-----------+ + | 2 | left eye | + +-------+-----------+ + | 3 | both eyes | + +-------+-----------+ + + Table 7: OldStereoMode + Values + +5.1.4.1.28.6. PixelWidth Element + + id / type: 0xB0 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\Video\PixelWidth + minOccurs / maxOccurs: 1 / 1 + definition: Width of the encoded video frames in pixels. + stream copy: True (Section 8) + +5.1.4.1.28.7. PixelHeight Element + + id / type: 0xBA / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\Video\PixelHeight + minOccurs / maxOccurs: 1 / 1 + definition: Height of the encoded video frames in pixels. + stream copy: True (Section 8) + +5.1.4.1.28.8. PixelCropBottom Element + + id / type / default: 0x54AA / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\PixelCropBottom + minOccurs / maxOccurs: 1 / 1 + definition: The number of video pixels to remove at the bottom of + the image. + stream copy: True (Section 8) + +5.1.4.1.28.9. PixelCropTop Element + + id / type / default: 0x54BB / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\PixelCropTop + minOccurs / maxOccurs: 1 / 1 + definition: The number of video pixels to remove at the top of the + image. + stream copy: True (Section 8) + +5.1.4.1.28.10. PixelCropLeft Element + + id / type / default: 0x54CC / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\PixelCropLeft + minOccurs / maxOccurs: 1 / 1 + definition: The number of video pixels to remove on the left of the + image. + stream copy: True (Section 8) + +5.1.4.1.28.11. PixelCropRight Element + + id / type / default: 0x54DD / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\PixelCropRight + minOccurs / maxOccurs: 1 / 1 + definition: The number of video pixels to remove on the right of the + image. + stream copy: True (Section 8) + +5.1.4.1.28.12. DisplayWidth Element + + id / type: 0x54B0 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\Video\DisplayWidth + maxOccurs: 1 + definition: Width of the video frames to display. Applies to the + video frame after cropping (PixelCrop* Elements). + notes: See Table 8. + stream copy: True (Section 8) + + +===========+==================================================+ + | attribute | note | + +===========+==================================================+ + | default | If the DisplayUnit of the same TrackEntry is 0, | + | | then the default value for DisplayWidth is equal | + | | to PixelWidth - PixelCropLeft - PixelCropRight; | + | | else, there is no default value. | + +-----------+--------------------------------------------------+ + + Table 8: DisplayWidth Implementation Notes + +5.1.4.1.28.13. DisplayHeight Element + + id / type: 0x54BA / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\Video\DisplayHeight + maxOccurs: 1 + definition: Height of the video frames to display. Applies to the + video frame after cropping (PixelCrop* Elements). + notes: See Table 9. + stream copy: True (Section 8) + + +===========+===================================================+ + | attribute | note | + +===========+===================================================+ + | default | If the DisplayUnit of the same TrackEntry is 0, | + | | then the default value for DisplayHeight is equal | + | | to PixelHeight - PixelCropTop - PixelCropBottom; | + | | else, there is no default value. | + +-----------+---------------------------------------------------+ + + Table 9: DisplayHeight Implementation Notes + +5.1.4.1.28.14. DisplayUnit Element + + id / type / default: 0x54B2 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\DisplayUnit + minOccurs / maxOccurs: 1 / 1 + definition: How DisplayWidth and DisplayHeight are interpreted. + defined values: See Table 10. Additional values can be registered + in the "Matroska Display Units" registry defined in Section 27.9. + + +=======+======================+ + | value | label | + +=======+======================+ + | 0 | pixels | + +-------+----------------------+ + | 1 | centimeters | + +-------+----------------------+ + | 2 | inches | + +-------+----------------------+ + | 3 | display aspect ratio | + +-------+----------------------+ + | 4 | unknown | + +-------+----------------------+ + + Table 10: DisplayUnit Values + +5.1.4.1.28.15. UncompressedFourCC Element + + id / type: 0x2EB524 / binary + length: 4 + path: \Segment\Tracks\TrackEntry\Video\UncompressedFourCC + minOccurs / maxOccurs: See Table 11 / 1 + definition: Specifies the uncompressed pixel format used for the + Track's data as a FourCC. This value is similar in scope to the + biCompression value of AVI's BITMAPINFO [AVIFormat]. There is + neither a definitive list of FourCC values nor an official + registry. Some common values for YUV pixel formats can be found + at [MSYUV8], [MSYUV16], and [FourCC-YUV]. Some common values for + uncompressed RGB pixel formats can be found at [MSRGB] and + [FourCC-RGB]. + notes: See Table 11. + stream copy: True (Section 8) + + +===========+==============================================+ + | attribute | note | + +===========+==============================================+ + | minOccurs | UncompressedFourCC MUST be set (minOccurs=1) | + | | in TrackEntry when the CodecID element of | + | | the TrackEntry is set to "V_UNCOMPRESSED". | + +-----------+----------------------------------------------+ + + Table 11: UncompressedFourCC Implementation Notes + +5.1.4.1.28.16. Colour Element + + id / type: 0x55B0 / master + path: \Segment\Tracks\TrackEntry\Video\Colour + maxOccurs: 1 + minver: 4 + definition: Settings describing the color format. + stream copy: True (Section 8) + +5.1.4.1.28.17. MatrixCoefficients Element + + id / type / default: 0x55B1 / uinteger / 2 + path: \Segment\Tracks\TrackEntry\Video\Colour\MatrixCoefficients + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: The Matrix Coefficients of the video used to derive luma + and chroma values from red, green, and blue color primaries. For + clarity, the value and meanings for MatrixCoefficients are adopted + from Table 4 of [ITU-H.273]. + restrictions: See Table 12. + stream copy: True (Section 8) + + +=======+=======================================+ + | value | label | + +=======+=======================================+ + | 0 | Identity | + +-------+---------------------------------------+ + | 1 | ITU-R BT.709 | + +-------+---------------------------------------+ + | 2 | unspecified | + +-------+---------------------------------------+ + | 3 | reserved | + +-------+---------------------------------------+ + | 4 | US FCC 73.682 | + +-------+---------------------------------------+ + | 5 | ITU-R BT.470BG | + +-------+---------------------------------------+ + | 6 | SMPTE 170M | + +-------+---------------------------------------+ + | 7 | SMPTE 240M | + +-------+---------------------------------------+ + | 8 | YCoCg | + +-------+---------------------------------------+ + | 9 | BT2020 Non-constant Luminance | + +-------+---------------------------------------+ + | 10 | BT2020 Constant Luminance | + +-------+---------------------------------------+ + | 11 | SMPTE ST 2085 | + +-------+---------------------------------------+ + | 12 | Chroma-derived Non-constant Luminance | + +-------+---------------------------------------+ + | 13 | Chroma-derived Constant Luminance | + +-------+---------------------------------------+ + | 14 | ITU-R BT.2100-0 | + +-------+---------------------------------------+ + + Table 12: MatrixCoefficients Values + +5.1.4.1.28.18. BitsPerChannel Element + + id / type / default: 0x55B2 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\Colour\BitsPerChannel + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: Number of decoded bits per channel. A value of 0 + indicates that the BitsPerChannel is unspecified. + stream copy: True (Section 8) + +5.1.4.1.28.19. ChromaSubsamplingHorz Element + + id / type: 0x55B3 / uinteger + path: \Segment\Tracks\TrackEntry\Video\Colour\ChromaSubsamplingHorz + maxOccurs: 1 + minver: 4 + definition: The number of pixels to remove in the Cr and Cb channels + for every pixel not removed horizontally. Example: For video with + 4:2:0 chroma subsampling, the ChromaSubsamplingHorz SHOULD be set + to 1. + stream copy: True (Section 8) + +5.1.4.1.28.20. ChromaSubsamplingVert Element + + id / type: 0x55B4 / uinteger + path: \Segment\Tracks\TrackEntry\Video\Colour\ChromaSubsamplingVert + maxOccurs: 1 + minver: 4 + definition: The number of pixels to remove in the Cr and Cb channels + for every pixel not removed vertically. Example: For video with + 4:2:0 chroma subsampling, the ChromaSubsamplingVert SHOULD be set + to 1. + stream copy: True (Section 8) + +5.1.4.1.28.21. CbSubsamplingHorz Element + + id / type: 0x55B5 / uinteger + path: \Segment\Tracks\TrackEntry\Video\Colour\CbSubsamplingHorz + maxOccurs: 1 + minver: 4 + definition: The number of pixels to remove in the Cb channel for + every pixel not removed horizontally. This is additive with + ChromaSubsamplingHorz. Example: For video with 4:2:1 chroma + subsampling, the ChromaSubsamplingHorz SHOULD be set to 1, and + CbSubsamplingHorz SHOULD be set to 1. + stream copy: True (Section 8) + +5.1.4.1.28.22. CbSubsamplingVert Element + + id / type: 0x55B6 / uinteger + path: \Segment\Tracks\TrackEntry\Video\Colour\CbSubsamplingVert + maxOccurs: 1 + minver: 4 + definition: The number of pixels to remove in the Cb channel for + every pixel not removed vertically. This is additive with + ChromaSubsamplingVert. + stream copy: True (Section 8) + +5.1.4.1.28.23. ChromaSitingHorz Element + + id / type / default: 0x55B7 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\Colour\ChromaSitingHorz + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: How chroma is subsampled horizontally. + defined values: See Table 13. Additional values can be registered + in the "Matroska Horizontal Chroma Sitings" registry defined in + Section 27.10. + stream copy: True (Section 8) + + +=======+=================+ + | value | label | + +=======+=================+ + | 0 | unspecified | + +-------+-----------------+ + | 1 | left collocated | + +-------+-----------------+ + | 2 | half | + +-------+-----------------+ + + Table 13: + ChromaSitingHorz Values + +5.1.4.1.28.24. ChromaSitingVert Element + + id / type / default: 0x55B8 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\Colour\ChromaSitingVert + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: How chroma is subsampled vertically. + defined values: See Table 14. Additional values can be registered + in the "Matroska Vertical Chroma Sitings" registry defined in + Section 27.11. + stream copy: True (Section 8) + + +=======+================+ + | value | label | + +=======+================+ + | 0 | unspecified | + +-------+----------------+ + | 1 | top collocated | + +-------+----------------+ + | 2 | half | + +-------+----------------+ + + Table 14: + ChromaSitingVert + Values + +5.1.4.1.28.25. Color Range Element + + id / type / default: 0x55B9 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\Colour\Range + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: Clipping of the color ranges. + defined values: See Table 15. Additional values can be registered + in the "Matroska Color Ranges" registry defined in Section 27.12. + stream copy: True (Section 8) + + +=======+=========================================================+ + | value | label | + +=======+=========================================================+ + | 0 | unspecified | + +-------+---------------------------------------------------------+ + | 1 | broadcast range | + +-------+---------------------------------------------------------+ + | 2 | full range (no clipping) | + +-------+---------------------------------------------------------+ + | 3 | defined by MatrixCoefficients / TransferCharacteristics | + +-------+---------------------------------------------------------+ + + Table 15: Range Values + +5.1.4.1.28.26. TransferCharacteristics Element + + id / type / default: 0x55BA / uinteger / 2 + path: \Segment\Tracks\TrackEntry\Video\Colour\TransferCharacteristic + s + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: The transfer characteristics of the video. For clarity, + the value and meanings for TransferCharacteristics are adopted + from Table 3 of [ITU-H.273]. + restrictions: See Table 16. + stream copy: True (Section 8) + + +=======+=======================================+ + | value | label | + +=======+=======================================+ + | 0 | reserved | + +-------+---------------------------------------+ + | 1 | ITU-R BT.709 | + +-------+---------------------------------------+ + | 2 | unspecified | + +-------+---------------------------------------+ + | 3 | reserved2 | + +-------+---------------------------------------+ + | 4 | Gamma 2.2 curve - BT.470M | + +-------+---------------------------------------+ + | 5 | Gamma 2.8 curve - BT.470BG | + +-------+---------------------------------------+ + | 6 | SMPTE 170M | + +-------+---------------------------------------+ + | 7 | SMPTE 240M | + +-------+---------------------------------------+ + | 8 | Linear | + +-------+---------------------------------------+ + | 9 | Log | + +-------+---------------------------------------+ + | 10 | Log Sqrt | + +-------+---------------------------------------+ + | 11 | IEC 61966-2-4 | + +-------+---------------------------------------+ + | 12 | ITU-R BT.1361 Extended Colour Gamut | + +-------+---------------------------------------+ + | 13 | IEC 61966-2-1 | + +-------+---------------------------------------+ + | 14 | ITU-R BT.2020 10 bit | + +-------+---------------------------------------+ + | 15 | ITU-R BT.2020 12 bit | + +-------+---------------------------------------+ + | 16 | ITU-R BT.2100 Perceptual Quantization | + +-------+---------------------------------------+ + | 17 | SMPTE ST 428-1 | + +-------+---------------------------------------+ + | 18 | ARIB STD-B67 (HLG) | + +-------+---------------------------------------+ + + Table 16: TransferCharacteristics Values + +5.1.4.1.28.27. Primaries Element + + id / type / default: 0x55BB / uinteger / 2 + path: \Segment\Tracks\TrackEntry\Video\Colour\Primaries + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: The color primaries of the video. For clarity, the + value and meanings for Primaries are adopted from Table 2 of + [ITU-H.273]. + restrictions: See Table 17. + stream copy: True (Section 8) + + +=======+========================================+ + | value | label | + +=======+========================================+ + | 0 | reserved | + +-------+----------------------------------------+ + | 1 | ITU-R BT.709 | + +-------+----------------------------------------+ + | 2 | unspecified | + +-------+----------------------------------------+ + | 3 | reserved2 | + +-------+----------------------------------------+ + | 4 | ITU-R BT.470M | + +-------+----------------------------------------+ + | 5 | ITU-R BT.470BG - BT.601 625 | + +-------+----------------------------------------+ + | 6 | ITU-R BT.601 525 - SMPTE 170M | + +-------+----------------------------------------+ + | 7 | SMPTE 240M | + +-------+----------------------------------------+ + | 8 | FILM | + +-------+----------------------------------------+ + | 9 | ITU-R BT.2020 | + +-------+----------------------------------------+ + | 10 | SMPTE ST 428-1 | + +-------+----------------------------------------+ + | 11 | SMPTE RP 432-2 | + +-------+----------------------------------------+ + | 12 | SMPTE EG 432-2 | + +-------+----------------------------------------+ + | 22 | EBU Tech. 3213-E - JEDEC P22 phosphors | + +-------+----------------------------------------+ + + Table 17: Primaries Values + +5.1.4.1.28.28. MaxCLL Element + + id / type: 0x55BC / uinteger + path: \Segment\Tracks\TrackEntry\Video\Colour\MaxCLL + maxOccurs: 1 + minver: 4 + definition: Maximum brightness of a single pixel (Maximum Content + Light Level) in candelas per square meter (cd/m^2). + stream copy: True (Section 8) + +5.1.4.1.28.29. MaxFALL Element + + id / type: 0x55BD / uinteger + path: \Segment\Tracks\TrackEntry\Video\Colour\MaxFALL + maxOccurs: 1 + minver: 4 + definition: Maximum brightness of a single full frame (Maximum + Frame-Average Light Level) in candelas per square meter (cd/m^2). + stream copy: True (Section 8) + +5.1.4.1.28.30. MasteringMetadata Element + + id / type: 0x55D0 / master + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata + maxOccurs: 1 + minver: 4 + definition: SMPTE 2086 mastering data. + stream copy: True (Section 8) + +5.1.4.1.28.31. PrimaryRChromaticityX Element + + id / type: 0x55D1 / float + range: 0x0p+0-0x1p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Prim + aryRChromaticityX + maxOccurs: 1 + minver: 4 + definition: Red X chromaticity coordinate, as defined by [CIE-1931]. + stream copy: True (Section 8) + +5.1.4.1.28.32. PrimaryRChromaticityY Element + + id / type: 0x55D2 / float + range: 0x0p+0-0x1p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Prim + aryRChromaticityY + maxOccurs: 1 + minver: 4 + definition: Red Y chromaticity coordinate, as defined by [CIE-1931]. + stream copy: True (Section 8) + +5.1.4.1.28.33. PrimaryGChromaticityX Element + + id / type: 0x55D3 / float + range: 0x0p+0-0x1p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Prim + aryGChromaticityX + maxOccurs: 1 + minver: 4 + definition: Green X chromaticity coordinate, as defined by + [CIE-1931]. + stream copy: True (Section 8) + +5.1.4.1.28.34. PrimaryGChromaticityY Element + + id / type: 0x55D4 / float + range: 0x0p+0-0x1p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Prim + aryGChromaticityY + maxOccurs: 1 + minver: 4 + definition: Green Y chromaticity coordinate, as defined by + [CIE-1931]. + stream copy: True (Section 8) + +5.1.4.1.28.35. PrimaryBChromaticityX Element + + id / type: 0x55D5 / float + range: 0x0p+0-0x1p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Prim + aryBChromaticityX + maxOccurs: 1 + minver: 4 + definition: Blue X chromaticity coordinate, as defined by + [CIE-1931]. + stream copy: True (Section 8) + +5.1.4.1.28.36. PrimaryBChromaticityY Element + + id / type: 0x55D6 / float + range: 0x0p+0-0x1p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Prim + aryBChromaticityY + maxOccurs: 1 + minver: 4 + definition: Blue Y chromaticity coordinate, as defined by + [CIE-1931]. + stream copy: True (Section 8) + +5.1.4.1.28.37. WhitePointChromaticityX Element + + id / type: 0x55D7 / float + range: 0x0p+0-0x1p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Whit + ePointChromaticityX + maxOccurs: 1 + minver: 4 + definition: White X chromaticity coordinate, as defined by + [CIE-1931]. + stream copy: True (Section 8) + +5.1.4.1.28.38. WhitePointChromaticityY Element + + id / type: 0x55D8 / float + range: 0x0p+0-0x1p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Whit + ePointChromaticityY + maxOccurs: 1 + minver: 4 + definition: White Y chromaticity coordinate, as defined by + [CIE-1931]. + stream copy: True (Section 8) + +5.1.4.1.28.39. LuminanceMax Element + + id / type: 0x55D9 / float + range: >= 0x0p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Lumi + nanceMax + maxOccurs: 1 + minver: 4 + definition: Maximum luminance. Represented in candelas per square + meter (cd/m^2). + stream copy: True (Section 8) + +5.1.4.1.28.40. LuminanceMin Element + + id / type: 0x55DA / float + range: >= 0x0p+0 + path: \Segment\Tracks\TrackEntry\Video\Colour\MasteringMetadata\Lumi + nanceMin + maxOccurs: 1 + minver: 4 + definition: Minimum luminance. Represented in candelas per square + meter (cd/m^2). + stream copy: True (Section 8) + +5.1.4.1.28.41. Projection Element + + id / type: 0x7670 / master + path: \Segment\Tracks\TrackEntry\Video\Projection + maxOccurs: 1 + minver: 4 + definition: Describes the video projection details. Used to render + spherical or VR videos or to flip videos horizontally or + vertically. + stream copy: True (Section 8) + +5.1.4.1.28.42. ProjectionType Element + + id / type / default: 0x7671 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\Video\Projection\ProjectionType + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: Describes the projection used for this video track. + defined values: See Table 18. Additional values can be registered + in the "Matroska Projection Types" registry defined in + Section 27.15. + stream copy: True (Section 8) + + +=======+=================+ + | value | label | + +=======+=================+ + | 0 | rectangular | + +-------+-----------------+ + | 1 | equirectangular | + +-------+-----------------+ + | 2 | cubemap | + +-------+-----------------+ + | 3 | mesh | + +-------+-----------------+ + + Table 18: + ProjectionType Values + +5.1.4.1.28.43. ProjectionPrivate Element + + id / type: 0x7672 / binary + path: \Segment\Tracks\TrackEntry\Video\Projection\ProjectionPrivate + maxOccurs: 1 + minver: 4 + definition: Private data that only applies to a specific projection. + + * If ProjectionType equals 0 (rectangular), then this element MUST + NOT be present. + * If ProjectionType equals 1 (equirectangular), then this element + MUST be present and contain the same binary data that would be + stored inside an ISOBMFF Equirectangular Projection Box ("equi"). + * If ProjectionType equals 2 (cubemap), then this element MUST be + present and contain the same binary data that would be stored + inside an ISOBMFF Cubemap Projection Box ("cbmp"). + * If ProjectionType equals 3 (mesh), then this element MUST be + present and contain the same binary data that would be stored + inside an ISOBMFF Mesh Projection Box ("mshp"). + + usage notes: ISOBMFF box size and FourCC fields are not included in + the binary data, but the FullBox version and flag fields are. + This is to avoid redundant framing information while preserving + versioning and semantics between the two container formats. + stream copy: True (Section 8) + +5.1.4.1.28.44. ProjectionPoseYaw Element + + id / type / default: 0x7673 / float / 0x0p+0 + range: >= -0xB4p+0, <= 0xB4p+0 + path: \Segment\Tracks\TrackEntry\Video\Projection\ProjectionPoseYaw + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: Specifies a yaw rotation to the projection. Value + represents a clockwise rotation, in degrees, around the up vector. + This rotation must be applied before any ProjectionPosePitch or + ProjectionPoseRoll rotations. The value of this element MUST be + in the -180 to 180 degree range, both inclusive. + + Setting ProjectionPoseYaw to 180 or -180 degrees with + ProjectionPoseRoll and ProjectionPosePitch set to 0 degrees flips the + image horizontally. + + stream copy: True (Section 8) + +5.1.4.1.28.45. ProjectionPosePitch Element + + id / type / default: 0x7674 / float / 0x0p+0 + range: >= -0x5Ap+0, <= 0x5Ap+0 + path: \Segment\Tracks\TrackEntry\Video\Projection\ProjectionPosePitc + h + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: Specifies a pitch rotation to the projection. Value + represents a counter-clockwise rotation, in degrees, around the + right vector. This rotation must be applied after the + ProjectionPoseYaw rotation and before the ProjectionPoseRoll + rotation. The value of this element MUST be in the -90 to 90 + degree range, both inclusive. + stream copy: True (Section 8) + +5.1.4.1.28.46. ProjectionPoseRoll Element + + id / type / default: 0x7675 / float / 0x0p+0 + range: >= -0xB4p+0, <= 0xB4p+0 + path: \Segment\Tracks\TrackEntry\Video\Projection\ProjectionPoseRoll + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: Specifies a roll rotation to the projection. Value + represents a counter-clockwise rotation, in degrees, around the + forward vector. This rotation must be applied after the + ProjectionPoseYaw and ProjectionPosePitch rotations. The value of + this element MUST be in the -180 to 180 degree range, both + inclusive. Setting ProjectionPoseRoll to 180 or -180 degrees and + ProjectionPoseYaw to 180 or -180 degrees with ProjectionPosePitch + set to 0 degrees flips the image vertically. Setting + ProjectionPoseRoll to 180 or -180 degrees with ProjectionPoseYaw + and ProjectionPosePitch set to 0 degrees flips the image + horizontally and vertically. + stream copy: True (Section 8) + +5.1.4.1.29. Audio Element + + id / type: 0xE1 / master + path: \Segment\Tracks\TrackEntry\Audio + maxOccurs: 1 + definition: Audio settings. + +5.1.4.1.29.1. SamplingFrequency Element + + id / type / default: 0xB5 / float / 0x1.f4p+12 + range: > 0x0p+0 + path: \Segment\Tracks\TrackEntry\Audio\SamplingFrequency + minOccurs / maxOccurs: 1 / 1 + definition: Sampling frequency in Hz. + stream copy: True (Section 8) + +5.1.4.1.29.2. OutputSamplingFrequency Element + + id / type: 0x78B5 / float + range: > 0x0p+0 + path: \Segment\Tracks\TrackEntry\Audio\OutputSamplingFrequency + maxOccurs: 1 + definition: Real output sampling frequency in Hz that is used for + Spectral Band Replication (SBR) techniques. + notes: See Table 19. + + +===========+======================================================+ + | attribute | note | + +===========+======================================================+ + | default | The default value for OutputSamplingFrequency of the | + | | same TrackEntry is equal to the SamplingFrequency. | + +-----------+------------------------------------------------------+ + + Table 19: OutputSamplingFrequency Implementation Notes + +5.1.4.1.29.3. Channels Element + + id / type / default: 0x9F / uinteger / 1 + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\Audio\Channels + minOccurs / maxOccurs: 1 / 1 + definition: Numbers of channels in the track. + stream copy: True (Section 8) + +5.1.4.1.29.4. BitDepth Element + + id / type: 0x6264 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\Audio\BitDepth + maxOccurs: 1 + definition: Bits per sample, mostly used for PCM. + stream copy: True (Section 8) + +5.1.4.1.30. TrackOperation Element + + id / type: 0xE2 / master + path: \Segment\Tracks\TrackEntry\TrackOperation + maxOccurs: 1 + minver: 3 + definition: Operation that needs to be applied on tracks to create + this virtual track. For more details, see Section 18.8. + stream copy: True (Section 8) + +5.1.4.1.30.1. TrackCombinePlanes Element + + id / type: 0xE3 / master + path: \Segment\Tracks\TrackEntry\TrackOperation\TrackCombinePlanes + maxOccurs: 1 + minver: 3 + definition: Contains the list of all video plane tracks that need to + be combined to create this 3D track. + stream copy: True (Section 8) + +5.1.4.1.30.2. TrackPlane Element + + id / type: 0xE4 / master + path: \Segment\Tracks\TrackEntry\TrackOperation\TrackCombinePlanes\T + rackPlane + minOccurs: 1 + minver: 3 + definition: Contains a video plane track that needs to be combined + to create this 3D track. + stream copy: True (Section 8) + +5.1.4.1.30.3. TrackPlaneUID Element + + id / type: 0xE5 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\TrackOperation\TrackCombinePlanes\T + rackPlane\TrackPlaneUID + minOccurs / maxOccurs: 1 / 1 + minver: 3 + definition: The TrackUID number of the track representing the plane. + stream copy: True (Section 8) + +5.1.4.1.30.4. TrackPlaneType Element + + id / type: 0xE6 / uinteger + path: \Segment\Tracks\TrackEntry\TrackOperation\TrackCombinePlanes\T + rackPlane\TrackPlaneType + minOccurs / maxOccurs: 1 / 1 + minver: 3 + definition: The kind of plane this track corresponds to. + defined values: See Table 20. Additional values can be registered + in the "Matroska Track Plane Types" registry defined in + Section 27.17. + stream copy: True (Section 8) + + +=======+============+ + | value | label | + +=======+============+ + | 0 | left eye | + +-------+------------+ + | 1 | right eye | + +-------+------------+ + | 2 | background | + +-------+------------+ + + Table 20: + TrackPlaneType Values + +5.1.4.1.30.5. TrackJoinBlocks Element + + id / type: 0xE9 / master + path: \Segment\Tracks\TrackEntry\TrackOperation\TrackJoinBlocks + maxOccurs: 1 + minver: 3 + definition: Contains the list of all tracks whose Blocks need to be + combined to create this virtual track. + stream copy: True (Section 8) + +5.1.4.1.30.6. TrackJoinUID Element + + id / type: 0xED / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\TrackOperation\TrackJoinBlocks\Trac + kJoinUID + minOccurs: 1 + minver: 3 + definition: The TrackUID number of a track whose blocks are used to + create this virtual track. + stream copy: True (Section 8) + +5.1.4.1.31. ContentEncodings Element + + id / type: 0x6D80 / master + path: \Segment\Tracks\TrackEntry\ContentEncodings + maxOccurs: 1 + definition: Settings for several content encoding mechanisms like + compression or encryption. + stream copy: True (Section 8) + +5.1.4.1.31.1. ContentEncoding Element + + id / type: 0x6240 / master + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding + minOccurs: 1 + definition: Settings for one content encoding like compression or + encryption. + stream copy: True (Section 8) + +5.1.4.1.31.2. ContentEncodingOrder Element + + id / type / default: 0x5031 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncodingOrder + minOccurs / maxOccurs: 1 / 1 + definition: Defines the order to apply each ContentEncoding of the + ContentEncodings. The decoder/demuxer MUST start with the + ContentEncoding with the highest ContentEncodingOrder and work its + way down to the ContentEncoding with the lowest + ContentEncodingOrder. This value MUST be unique for each + ContentEncoding found in the ContentEncodings of this TrackEntry. + stream copy: True (Section 8) + +5.1.4.1.31.3. ContentEncodingScope Element + + id / type / default: 0x5032 / uinteger / 1 + range: not 0 (0x1-0x8000000000000000) + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncodingScope + minOccurs / maxOccurs: 1 / 1 + definition: A bit field that describes which elements have been + modified in this way. Values (big-endian) can be OR'ed. + defined values: See Table 21. Additional values can be registered + in the "Matroska Content Encoding Scopes" registry defined in + Section 27.5. + stream copy: True (Section 8) + + +=======+=========+============================================+ + | value | label | definition | + +=======+=========+============================================+ + | 0x1 | Block | All frame contents, excluding lacing data. | + +-------+---------+--------------------------------------------+ + | 0x2 | Private | The track's CodecPrivate data. | + +-------+---------+--------------------------------------------+ + | 0x4 | Next | The next ContentEncoding (next | + | | | ContentEncodingOrder; the data inside | + | | | ContentCompression and/or | + | | | ContentEncryption). This value SHOULD NOT | + | | | be used, as it's not supported by players. | + +-------+---------+--------------------------------------------+ + + Table 21: ContentEncodingScope Values + +5.1.4.1.31.4. ContentEncodingType Element + + id / type / default: 0x5033 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncodingType + minOccurs / maxOccurs: 1 / 1 + definition: A value describing the kind of transformation that is + applied. + defined values: See Table 22. Additional values can be registered + in the "Matroska Content Encoding Types" registry defined in + Section 27.6. + stream copy: True (Section 8) + + +=======+=============+ + | value | label | + +=======+=============+ + | 0 | Compression | + +-------+-------------+ + | 1 | Encryption | + +-------+-------------+ + + Table 22: + ContentEncodingType + Values + +5.1.4.1.31.5. ContentCompression Element + + id / type: 0x5034 / master + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentCompression + maxOccurs: 1 + definition: Settings describing the compression used. This element + MUST be present if the value of ContentEncodingType is 0 and + absent otherwise. Each block MUST be decompressable, even if no + previous block is available in order to not prevent seeking. + stream copy: True (Section 8) + +5.1.4.1.31.6. ContentCompAlgo Element + + id / type / default: 0x4254 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentCompression\ContentCompAlgo + minOccurs / maxOccurs: 1 / 1 + definition: The compression algorithm used. + defined values: See Table 23. Additional values can be registered + in the "Matroska Compression Algorithms" registry defined in + Section 27.2. + usage notes: Compression method "1" (bzlib) and "2" (lzo1x) lack + proper documentation on the format, which limits implementation + possibilities. Due to licensing conflicts on commonly available + libraries' compression methods, "2" (lzo1x) does not offer + widespread interoperability. A Matroska Writer SHOULD NOT use + these compression methods by default. A Matroska Reader MAY + support methods "1" and "2" and SHOULD support other methods. + stream copy: True (Section 8) + + +=======+===========+========================================+ + | value | label | definition | + +=======+===========+========================================+ + | 0 | zlib | zlib compression [RFC1950]. | + +-------+-----------+----------------------------------------+ + | 1 | bzlib | bzip2 compression [BZIP2] SHOULD NOT | + | | | be used; see usage notes. | + +-------+-----------+----------------------------------------+ + | 2 | lzo1x | Lempel-Ziv-Oberhumer compression [LZO] | + | | | SHOULD NOT be used; see usage notes. | + +-------+-----------+----------------------------------------+ + | 3 | Header | Octets in ContentCompSettings | + | | Stripping | (Section 5.1.4.1.31.7) have been | + | | | stripped from each frame. | + +-------+-----------+----------------------------------------+ + + Table 23: ContentCompAlgo Values + +5.1.4.1.31.7. ContentCompSettings Element + + id / type: 0x4255 / binary + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentCompression\ContentCompSettings + maxOccurs: 1 + definition: Settings that might be needed by the decompressor. For + Header Stripping (ContentCompAlgo=3), the bytes that were removed + from the beginning of each frame of the track. + stream copy: True (Section 8) + +5.1.4.1.31.8. ContentEncryption Element + + id / type: 0x5035 / master + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption + maxOccurs: 1 + definition: Settings describing the encryption used. This element + MUST be present if the value of ContentEncodingType is 1 + (encryption) and MUST be ignored otherwise. A Matroska Player MAY + support encryption. + stream copy: True (Section 8) + +5.1.4.1.31.9. ContentEncAlgo Element + + id / type / default: 0x47E1 / uinteger / 0 + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption\ContentEncAlgo + minOccurs / maxOccurs: 1 / 1 + definition: The encryption algorithm used. + defined values: See Table 24. Additional values can be registered + in the "Matroska Encryption Algorithms" registry defined in + Section 27.3. + stream copy: True (Section 8) + + +=======+===========+============================================+ + | value | label | definition | + +=======+===========+============================================+ + | 0 | Not | The data are not encrypted. | + | | encrypted | | + +-------+-----------+--------------------------------------------+ + | 1 | DES | Data Encryption Standard (DES) [FIPS46-3]. | + | | | This value SHOULD be avoided. | + +-------+-----------+--------------------------------------------+ + | 2 | 3DES | Triple Data Encryption Algorithm | + | | | [SP800-67]. This value SHOULD be avoided. | + +-------+-----------+--------------------------------------------+ + | 3 | Twofish | Twofish Encryption Algorithm [Twofish]. | + +-------+-----------+--------------------------------------------+ + | 4 | Blowfish | Blowfish Encryption Algorithm [Blowfish]. | + | | | This value SHOULD be avoided. | + +-------+-----------+--------------------------------------------+ + | 5 | AES | Advanced Encryption Standard (AES) | + | | | [FIPS197]. | + +-------+-----------+--------------------------------------------+ + + Table 24: ContentEncAlgo Values + +5.1.4.1.31.10. ContentEncKeyID Element + + id / type: 0x47E2 / binary + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption\ContentEncKeyID + maxOccurs: 1 + definition: For public key algorithms, the ID of the public key that + the data was encrypted with. + stream copy: True (Section 8) + +5.1.4.1.31.11. ContentEncAESSettings Element + + id / type: 0x47E7 / master + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption\ContentEncAESSettings + maxOccurs: 1 + minver: 4 + definition: Settings describing the encryption algorithm used. + notes: See Table 25. + stream copy: True (Section 8) + + +===========+=================================================+ + | attribute | note | + +===========+=================================================+ + | maxOccurs | ContentEncAESSettings MUST NOT be set | + | | (maxOccurs=0) if ContentEncAlgo is not AES (5). | + +-----------+-------------------------------------------------+ + + Table 25: ContentEncAESSettings Implementation Notes + +5.1.4.1.31.12. AESSettingsCipherMode Element + + id / type: 0x47E8 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption\ContentEncAESSettings\AESSettingsCipherMode + minOccurs / maxOccurs: 1 / 1 + minver: 4 + definition: The AES cipher mode used in the encryption. + defined values: See Table 26. Additional values can be registered + in the "Matroska AES Cipher Modes" registry defined in + Section 27.4. + notes: See Table 27. + stream copy: True (Section 8) + + +=======+=========+===================================+ + | value | label | definition | + +=======+=========+===================================+ + | 1 | AES-CTR | Counter [SP800-38A] | + +-------+---------+-----------------------------------+ + | 2 | AES-CBC | Cipher Block Chaining [SP800-38A] | + +-------+---------+-----------------------------------+ + + Table 26: AESSettingsCipherMode Values + + +===========+=================================================+ + | attribute | note | + +===========+=================================================+ + | maxOccurs | AESSettingsCipherMode MUST NOT be set | + | | (maxOccurs=0) if ContentEncAlgo is not AES (5). | + +-----------+-------------------------------------------------+ + + Table 27: AESSettingsCipherMode Implementation Notes + +5.1.5. Cues Element + + id / type: 0x1C53BB6B / master + path: \Segment\Cues + minOccurs / maxOccurs: See Table 28 / 1 + definition: A Top-Level Element to speed seeking access. All + entries are local to the Segment. + notes: See Table 28. + + +===========+====================================================+ + | attribute | note | + +===========+====================================================+ + | minOccurs | This element SHOULD be set when the Segment is not | + | | transmitted as a live stream; see Section 23.2. | + +-----------+----------------------------------------------------+ + + Table 28: Cues Implementation Notes + +5.1.5.1. CuePoint Element + + id / type: 0xBB / master + path: \Segment\Cues\CuePoint + minOccurs: 1 + definition: Contains all information relative to a seek point in the + Segment. + +5.1.5.1.1. CueTime Element + + id / type: 0xB3 / uinteger + path: \Segment\Cues\CuePoint\CueTime + minOccurs / maxOccurs: 1 / 1 + definition: Absolute timestamp of the seek point, expressed in + Segment Ticks, which are based on TimestampScale; see + Section 11.1. + +5.1.5.1.2. CueTrackPositions Element + + id / type: 0xB7 / master + path: \Segment\Cues\CuePoint\CueTrackPositions + minOccurs: 1 + definition: Contains positions for different tracks corresponding to + the timestamp. + +5.1.5.1.2.1. CueTrack Element + + id / type: 0xF7 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Cues\CuePoint\CueTrackPositions\CueTrack + minOccurs / maxOccurs: 1 / 1 + definition: The track for which a position is given. + +5.1.5.1.2.2. CueClusterPosition Element + + id / type: 0xF1 / uinteger + path: \Segment\Cues\CuePoint\CueTrackPositions\CueClusterPosition + minOccurs / maxOccurs: 1 / 1 + definition: The Segment Position (Section 16) of the Cluster + containing the associated Block. + +5.1.5.1.2.3. CueRelativePosition Element + + id / type: 0xF0 / uinteger + path: \Segment\Cues\CuePoint\CueTrackPositions\CueRelativePosition + maxOccurs: 1 + minver: 4 + definition: The relative position inside the Cluster of the + referenced SimpleBlock or BlockGroup with 0 being the first + possible position for an element inside that Cluster. + +5.1.5.1.2.4. CueDuration Element + + id / type: 0xB2 / uinteger + path: \Segment\Cues\CuePoint\CueTrackPositions\CueDuration + maxOccurs: 1 + minver: 4 + definition: The duration of the block, expressed in Segment Ticks, + which are based on TimestampScale; see Section 11.1. If missing, + the track's DefaultDuration does not apply and no duration + information is available in terms of the cues. + +5.1.5.1.2.5. CueBlockNumber Element + + id / type: 0x5378 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Cues\CuePoint\CueTrackPositions\CueBlockNumber + maxOccurs: 1 + definition: Number of the Block in the specified Cluster. + +5.1.5.1.2.6. CueCodecState Element + + id / type / default: 0xEA / uinteger / 0 + path: \Segment\Cues\CuePoint\CueTrackPositions\CueCodecState + minOccurs / maxOccurs: 1 / 1 + minver: 2 + definition: The Segment Position (Section 16) of the Codec State + corresponding to this Cues element. 0 means that the data is taken + from the initial TrackEntry. + +5.1.5.1.2.7. CueReference Element + + id / type: 0xDB / master + path: \Segment\Cues\CuePoint\CueTrackPositions\CueReference + minver: 2 + definition: The Clusters containing the referenced Blocks. + +5.1.5.1.2.8. CueRefTime Element + + id / type: 0x96 / uinteger + path: \Segment\Cues\CuePoint\CueTrackPositions\CueReference\CueRefTi + me + minOccurs / maxOccurs: 1 / 1 + minver: 2 + definition: Timestamp of the referenced Block, expressed in Segment + Ticks which is based on TimestampScale; see Section 11.1. + +5.1.6. Attachments Element + + id / type: 0x1941A469 / master + path: \Segment\Attachments + maxOccurs: 1 + definition: Contains attached files. + +5.1.6.1. AttachedFile Element + + id / type: 0x61A7 / master + path: \Segment\Attachments\AttachedFile + minOccurs: 1 + definition: An attached file. + +5.1.6.1.1. FileDescription Element + + id / type: 0x467E / utf-8 + path: \Segment\Attachments\AttachedFile\FileDescription + maxOccurs: 1 + definition: A human-friendly name for the attached file. + +5.1.6.1.2. FileName Element + + id / type: 0x466E / utf-8 + path: \Segment\Attachments\AttachedFile\FileName + minOccurs / maxOccurs: 1 / 1 + definition: Filename of the attached file. + +5.1.6.1.3. FileMediaType Element + + id / type: 0x4660 / string + path: \Segment\Attachments\AttachedFile\FileMediaType + minOccurs / maxOccurs: 1 / 1 + definition: Media type of the file following the format described in + [RFC6838]. + stream copy: True (Section 8) + +5.1.6.1.4. FileData Element + + id / type: 0x465C / binary + path: \Segment\Attachments\AttachedFile\FileData + minOccurs / maxOccurs: 1 / 1 + definition: The data of the file. + stream copy: True (Section 8) + +5.1.6.1.5. FileUID Element + + id / type: 0x46AE / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Attachments\AttachedFile\FileUID + minOccurs / maxOccurs: 1 / 1 + definition: UID representing the file, as random as possible. + stream copy: True (Section 8) + +5.1.7. Chapters Element + + id / type: 0x1043A770 / master + path: \Segment\Chapters + maxOccurs: 1 + recurring: True + definition: A system to define basic menus and partition data. For + more detailed information, see Section 20. + +5.1.7.1. EditionEntry Element + + id / type: 0x45B9 / master + path: \Segment\Chapters\EditionEntry + minOccurs: 1 + definition: Contains all information about a Segment edition. + +5.1.7.1.1. EditionUID Element + + id / type: 0x45BC / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Chapters\EditionEntry\EditionUID + maxOccurs: 1 + definition: A UID that identifies the edition. It's useful for + tagging an edition. + stream copy: True (Section 8) + +5.1.7.1.2. EditionFlagDefault Element + + id / type / default: 0x45DB / uinteger / 0 + range: 0-1 + path: \Segment\Chapters\EditionEntry\EditionFlagDefault + minOccurs / maxOccurs: 1 / 1 + definition: Set to 1 if the edition SHOULD be used as the default + one. + +5.1.7.1.3. EditionFlagOrdered Element + + id / type / default: 0x45DD / uinteger / 0 + range: 0-1 + path: \Segment\Chapters\EditionEntry\EditionFlagOrdered + minOccurs / maxOccurs: 1 / 1 + definition: Set to 1 if the chapters can be defined multiple times + and the order to play them is enforced; see Section 20.1.3. + +5.1.7.1.4. ChapterAtom Element + + id / type: 0xB6 / master + path: \Segment\Chapters\EditionEntry\+ChapterAtom + minOccurs: 1 + recursive: True + definition: Contains the atom information to use as the chapter atom + (applies to all tracks). + +5.1.7.1.4.1. ChapterUID Element + + id / type: 0x73C4 / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterUID + minOccurs / maxOccurs: 1 / 1 + definition: A UID that identifies the Chapter. + stream copy: True (Section 8) + +5.1.7.1.4.2. ChapterStringUID Element + + id / type: 0x5654 / utf-8 + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterStringUID + maxOccurs: 1 + minver: 3 + definition: A unique string ID that identifies the Chapter. For + example, it is used as the storage for cue identifier values + [WebVTT]. + +5.1.7.1.4.3. ChapterTimeStart Element + + id / type: 0x91 / uinteger + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterTimeStart + minOccurs / maxOccurs: 1 / 1 + definition: Timestamp of the start of Chapter, expressed in Matroska + Ticks -- i.e., in nanoseconds; see Section 11.1. + +5.1.7.1.4.4. ChapterTimeEnd Element + + id / type: 0x92 / uinteger + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterTimeEnd + minOccurs / maxOccurs: See Table 29 / 1 + definition: Timestamp of the end of Chapter (timestamp excluded), + expressed in Matroska Ticks -- i.e., in nanoseconds; see + Section 11.1. The value MUST be greater than or equal to the + ChapterTimeStart of the same ChapterAtom. + usage notes: With the ChapterTimeEnd timestamp value being excluded, + it MUST take into account the duration of the last frame it + includes, especially for the ChapterAtom using the last frames of + the Segment. + notes: See Table 29. + + +===========+====================================================+ + | attribute | note | + +===========+====================================================+ + | minOccurs | ChapterTimeEnd MUST be set (minOccurs=1) if the | + | | Edition is an ordered edition; see Section 20.1.3. | + | | If it's a Parent Chapter, see Section 20.2.3. | + +-----------+----------------------------------------------------+ + + Table 29: ChapterTimeEnd Implementation Notes + +5.1.7.1.4.5. ChapterFlagHidden Element + + id / type / default: 0x98 / uinteger / 0 + range: 0-1 + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterFlagHidden + minOccurs / maxOccurs: 1 / 1 + definition: Set to 1 if a chapter is hidden. Hidden chapters SHOULD + NOT be available to the user interface (but still be available to + Control Tracks; see Section 20.2.5 on Chapter flags). + +5.1.7.1.4.6. ChapterSegmentUUID Element + + id / type: 0x6E67 / binary + length: 16 + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterSegmentUUID + minOccurs / maxOccurs: See Table 30 / 1 + definition: The SegmentUUID of another Segment to play during this + chapter. + usage notes: The value MUST NOT be the SegmentUUID value of the + Segment it belongs to. + notes: See Table 30. + + +===========+==============================================+ + | attribute | note | + +===========+==============================================+ + | minOccurs | ChapterSegmentUUID MUST be set (minOccurs=1) | + | | if ChapterSegmentEditionUID is used; see | + | | Section 17.2 on Medium-Linking Segments. | + +-----------+----------------------------------------------+ + + Table 30: ChapterSegmentUUID Implementation Notes + +5.1.7.1.4.7. ChapterSegmentEditionUID Element + + id / type: 0x6EBC / uinteger + range: not 0 (1-18446744073709551615) + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterSegmentEdit + ionUID + maxOccurs: 1 + definition: The EditionUID to play from the Segment linked in + ChapterSegmentUUID. If ChapterSegmentEditionUID is undeclared, + then no Edition of the Linked Segment is used; see Section 17.2 on + Medium-Linking Segments. + +5.1.7.1.4.8. ChapterPhysicalEquiv Element + + id / type: 0x63C3 / uinteger + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterPhysicalEqu + iv + maxOccurs: 1 + definition: Specifies the physical equivalent of this ChapterAtom, + e.g., "DVD" (60) or "SIDE" (50); see Section 20.4 for a complete + list of values. + +5.1.7.1.4.9. ChapterDisplay Element + + id / type: 0x80 / master + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterDisplay + definition: Contains all possible strings to use for the chapter + display. + +5.1.7.1.4.10. ChapString Element + + id / type: 0x85 / utf-8 + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterDisplay\Cha + pString + minOccurs / maxOccurs: 1 / 1 + definition: Contains the string to use as the chapter atom. + +5.1.7.1.4.11. ChapLanguage Element + + id / type / default: 0x437C / string / eng + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterDisplay\Cha + pLanguage + minOccurs: 1 + definition: A language corresponding to the string, in the Matroska + languages form; see Section 12 on language codes. This element + MUST be ignored if a ChapLanguageBCP47 element is used within the + same ChapterDisplay element. + +5.1.7.1.4.12. ChapLanguageBCP47 Element + + id / type: 0x437D / string + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterDisplay\Cha + pLanguageBCP47 + minver: 4 + definition: A language corresponding to the ChapString, in the form + defined in [RFC5646]; see Section 12 on language codes. If a + ChapLanguageBCP47 element is used, then any ChapLanguage and + ChapCountry elements used in the same ChapterDisplay MUST be + ignored. + +5.1.7.1.4.13. ChapCountry Element + + id / type: 0x437E / string + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapterDisplay\Cha + pCountry + definition: A country corresponding to the string, in the Matroska + countries form; see Section 13 on country codes. This element + MUST be ignored if a ChapLanguageBCP47 element is used within the + same ChapterDisplay element. + +5.1.7.1.4.14. ChapProcess Element + + id / type: 0x6944 / master + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapProcess + definition: Contains all the commands associated with the Atom. + +5.1.7.1.4.15. ChapProcessCodecID Element + + id / type / default: 0x6955 / uinteger / 0 + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapProcess\ChapPr + ocessCodecID + minOccurs / maxOccurs: 1 / 1 + definition: Contains the type of the codec used for processing. + defined values: See Table 31. Additional values can be registered + in the "Matroska Chapter Codec IDs" registry defined in + Section 27.14. + + +=======+=================+============================+ + | value | label | definition | + +=======+=================+============================+ + | 0 | Matroska Script | Chapter commands using the | + | | | Matroska Script codec. | + +-------+-----------------+----------------------------+ + | 1 | DVD-menu | Chapter commands using the | + | | | DVD-like codec. | + +-------+-----------------+----------------------------+ + + Table 31: ChapProcessCodecID Values + +5.1.7.1.4.16. ChapProcessPrivate Element + + id / type: 0x450D / binary + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapProcess\ChapPr + ocessPrivate + maxOccurs: 1 + definition: Optional data attached to the ChapProcessCodecID + information. For ChapProcessCodecID = 1, it is the "DVD level" + equivalent; see Section 20.3 on DVD menus. + +5.1.7.1.4.17. ChapProcessCommand Element + + id / type: 0x6911 / master + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapProcess\ChapPr + ocessCommand + definition: Contains all the commands associated with the Atom. + +5.1.7.1.4.18. ChapProcessTime Element + + id / type: 0x6922 / uinteger + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapProcess\ChapPr + ocessCommand\ChapProcessTime + minOccurs / maxOccurs: 1 / 1 + definition: Defines when the process command SHOULD be handled. + restrictions: See Table 32. + + +=======+===============================+ + | value | label | + +=======+===============================+ + | 0 | during the whole chapter | + +-------+-------------------------------+ + | 1 | before starting playback | + +-------+-------------------------------+ + | 2 | after playback of the chapter | + +-------+-------------------------------+ + + Table 32: ChapProcessTime Values + +5.1.7.1.4.19. ChapProcessData Element + + id / type: 0x6933 / binary + path: \Segment\Chapters\EditionEntry\+ChapterAtom\ChapProcess\ChapPr + ocessCommand\ChapProcessData + minOccurs / maxOccurs: 1 / 1 + definition: Contains the command information. The data SHOULD be + interpreted depending on the ChapProcessCodecID value. For + ChapProcessCodecID = 1, the data correspond to the binary DVD cell + pre/post commands; see Section 20.3 on DVD menus. + +5.1.8. Tags Element + + id / type: 0x1254C367 / master + path: \Segment\Tags + definition: Element containing metadata describing Tracks, Editions, + Chapters, Attachments, or the Segment as a whole. A list of valid + tags can be found in [MatroskaTags]. + +5.1.8.1. Tag Element + + id / type: 0x7373 / master + path: \Segment\Tags\Tag + minOccurs: 1 + definition: A single metadata descriptor. + +5.1.8.1.1. Targets Element + + id / type: 0x63C0 / master + path: \Segment\Tags\Tag\Targets + minOccurs / maxOccurs: 1 / 1 + definition: Specifies which other elements the metadata represented + by the tag value applies to. If empty or omitted, then the tag + value describes everything in the Segment. + +5.1.8.1.1.1. TargetTypeValue Element + + id / type / default: 0x68CA / uinteger / 50 + range: not 0 (1-18446744073709551615) + path: \Segment\Tags\Tag\Targets\TargetTypeValue + minOccurs / maxOccurs: 1 / 1 + definition: A number to indicate the logical level of the target. + defined values: See Table 33. Additional values can be registered + in the "Matroska Tags Target Types" registry defined in + Section 27.13. + usage notes: The TargetTypeValue values are meant to be compared. + Higher values MUST correspond to a logical level that contains the + lower logical level TargetTypeValue values. + + +=======+==========================+================================+ + | value | label | definition | + +=======+==========================+================================+ + | 70 | COLLECTION | The highest hierarchical level | + | | | that tags can describe. | + +-------+--------------------------+--------------------------------+ + | 60 | EDITION / ISSUE / | A list of lower levels grouped | + | | VOLUME / OPUS / | together. | + | | SEASON / SEQUEL | | + +-------+--------------------------+--------------------------------+ + | 50 | ALBUM / OPERA / | The most common grouping level | + | | CONCERT / MOVIE / | of music and video (e.g., an | + | | EPISODE | episode for TV series). | + +-------+--------------------------+--------------------------------+ + | 40 | PART / SESSION | When an album or episode has | + | | | different logical parts. | + +-------+--------------------------+--------------------------------+ + | 30 | TRACK / SONG / | The common parts of an album | + | | CHAPTER | or movie. | + +-------+--------------------------+--------------------------------+ + | 20 | SUBTRACK / | Corresponds to parts of a | + | | MOVEMENT / SCENE | track for audio, such as a | + | | | movement or scene in a movie. | + +-------+--------------------------+--------------------------------+ + | 10 | SHOT | The lowest hierarchy found in | + | | | music or movies. | + +-------+--------------------------+--------------------------------+ + + Table 33: TargetTypeValue Values + +5.1.8.1.1.2. TargetType Element + + id / type: 0x63CA / string + path: \Segment\Tags\Tag\Targets\TargetType + maxOccurs: 1 + definition: An informational string that can be used to display the + logical level of the target, such as "ALBUM", "TRACK", "MOVIE", + "CHAPTER", etc. + restrictions: See Table 34. + + +============+====================+ + | value | label | + +============+====================+ + | COLLECTION | TargetTypeValue 70 | + +------------+--------------------+ + | EDITION | TargetTypeValue 60 | + +------------+--------------------+ + | ISSUE | TargetTypeValue 60 | + +------------+--------------------+ + | VOLUME | TargetTypeValue 60 | + +------------+--------------------+ + | OPUS | TargetTypeValue 60 | + +------------+--------------------+ + | SEASON | TargetTypeValue 60 | + +------------+--------------------+ + | SEQUEL | TargetTypeValue 60 | + +------------+--------------------+ + | ALBUM | TargetTypeValue 50 | + +------------+--------------------+ + | OPERA | TargetTypeValue 50 | + +------------+--------------------+ + | CONCERT | TargetTypeValue 50 | + +------------+--------------------+ + | MOVIE | TargetTypeValue 50 | + +------------+--------------------+ + | EPISODE | TargetTypeValue 50 | + +------------+--------------------+ + | PART | TargetTypeValue 40 | + +------------+--------------------+ + | SESSION | TargetTypeValue 40 | + +------------+--------------------+ + | TRACK | TargetTypeValue 30 | + +------------+--------------------+ + | SONG | TargetTypeValue 30 | + +------------+--------------------+ + | CHAPTER | TargetTypeValue 30 | + +------------+--------------------+ + | SUBTRACK | TargetTypeValue 20 | + +------------+--------------------+ + | MOVEMENT | TargetTypeValue 20 | + +------------+--------------------+ + | SCENE | TargetTypeValue 20 | + +------------+--------------------+ + | SHOT | TargetTypeValue 10 | + +------------+--------------------+ + + Table 34: TargetType Values + +5.1.8.1.1.3. TagTrackUID Element + + id / type / default: 0x63C5 / uinteger / 0 + path: \Segment\Tags\Tag\Targets\TagTrackUID + definition: A UID that identifies the Track(s) that the tags belong + to. + usage notes: If the value is 0 at this level, the tags apply to all + tracks in the Segment. If set to any other value, it MUST match + the TrackUID value of a track found in this Segment. + +5.1.8.1.1.4. TagEditionUID Element + + id / type / default: 0x63C9 / uinteger / 0 + path: \Segment\Tags\Tag\Targets\TagEditionUID + definition: A UID that identifies the EditionEntry(s) that the tags + belong to. + usage notes: If the value is 0 at this level, the tags apply to all + editions in the Segment. If set to any other value, it MUST match + the EditionUID value of an edition found in this Segment. + +5.1.8.1.1.5. TagChapterUID Element + + id / type / default: 0x63C4 / uinteger / 0 + path: \Segment\Tags\Tag\Targets\TagChapterUID + definition: A UID that identifies the Chapter(s) that the tags + belong to. + usage notes: If the value is 0 at this level, the tags apply to all + chapters in the Segment. If set to any other value, it MUST match + the ChapterUID value of a chapter found in this Segment. + +5.1.8.1.1.6. TagAttachmentUID Element + + id / type / default: 0x63C6 / uinteger / 0 + path: \Segment\Tags\Tag\Targets\TagAttachmentUID + definition: A UID that identifies the Attachment(s) that the tags + belong to. + usage notes: If the value is 0 at this level, the tags apply to all + the attachments in the Segment. If set to any other value, it + MUST match the FileUID value of an attachment found in this + Segment. + +5.1.8.1.2. SimpleTag Element + + id / type: 0x67C8 / master + path: \Segment\Tags\Tag\+SimpleTag + minOccurs: 1 + recursive: True + definition: Contains general information about the target. + +5.1.8.1.2.1. TagName Element + + id / type: 0x45A3 / utf-8 + path: \Segment\Tags\Tag\+SimpleTag\TagName + minOccurs / maxOccurs: 1 / 1 + definition: The name of the tag value that is going to be stored. + +5.1.8.1.2.2. TagLanguage Element + + id / type / default: 0x447A / string / und + path: \Segment\Tags\Tag\+SimpleTag\TagLanguage + minOccurs / maxOccurs: 1 / 1 + definition: Specifies the language of the specified tag in the + Matroska languages form; see Section 12 on language codes. This + element MUST be ignored if the TagLanguageBCP47 element is used + within the same SimpleTag element. + +5.1.8.1.2.3. TagLanguageBCP47 Element + + id / type: 0x447B / string + path: \Segment\Tags\Tag\+SimpleTag\TagLanguageBCP47 + maxOccurs: 1 + minver: 4 + definition: The language used in the TagString, in the form defined + in [RFC5646]; see Section 12 on language codes. If this element + is used, then any TagLanguage elements used in the same SimpleTag + MUST be ignored. + +5.1.8.1.2.4. TagDefault Element + + id / type / default: 0x4484 / uinteger / 1 + range: 0-1 + path: \Segment\Tags\Tag\+SimpleTag\TagDefault + minOccurs / maxOccurs: 1 / 1 + definition: A boolean value to indicate if this is the default/ + original language to use for the given tag. + +5.1.8.1.2.5. TagString Element + + id / type: 0x4487 / utf-8 + path: \Segment\Tags\Tag\+SimpleTag\TagString + maxOccurs: 1 + definition: The tag value. + +5.1.8.1.2.6. TagBinary Element + + id / type: 0x4485 / binary + path: \Segment\Tags\Tag\+SimpleTag\TagBinary + maxOccurs: 1 + definition: The tag value if it is binary. Note that this cannot be + used in the same SimpleTag as TagString. + +6. Matroska Element Ordering + + With the exceptions of the EBML Header and the CRC-32 element, the + EBML specification [RFC8794] does not require any particular storage + order for elements. However, this specification defines mandates and + recommendations for ordering certain elements to facilitate better + playback, seeking, and editing efficiency. This section describes + and offers rationale for ordering requirements and recommendations + for Matroska. + +6.1. Top-Level Elements + + The Info element is the only REQUIRED Top-Level Element in a Matroska + file. To be playable, Matroska MUST also contain at least one Tracks + element and Cluster element. The first Info element and the first + Tracks element either MUST be stored before the first Cluster element + or SHALL both be referenced by a SeekHead element occurring before + the first Cluster element. + + All Top-Level Elements MUST use a 4-octet EBML Element ID. + + When using Medium Linking, chapters are used to reference other + Segments to play in a given order (see Section 17.2). A Segment + containing these Linked Chapters does not require a Tracks element or + a Cluster element. + + It is possible to edit a Matroska file after it has been created. + For example, chapters, tags, or attachments can be added. When new + Top-Level Elements are added to a Matroska file, the SeekHead + element(s) MUST be updated so that the SeekHead element(s) itemizes + the identity and position of all Top-Level Elements. + + Editing, removing, or adding elements to a Matroska file often + requires that some existing elements be voided or extended. + Transforming the existing elements into Void elements as padding can + be used as a method to avoid moving large amounts of data around. + +6.2. CRC-32 + + As noted by the EBML specification [RFC8794], if a CRC-32 element is + used, then the CRC-32 element MUST be the first ordered element + within its Parent Element. + + In Matroska, all Top-Level Elements of an EBML Document SHOULD + include a CRC-32 element as their first Child Element. The Segment + element, which is the Root Element, SHOULD NOT have a CRC-32 element. + +6.3. SeekHead + + If used, the first SeekHead element MUST be the first non-CRC-32 + Child element of the Segment element. If a second SeekHead element + is used, then the first SeekHead element MUST reference the identity + and position of the second SeekHead element. + + Additionally, the second SeekHead element MUST only reference Cluster + elements and not any other Top-Level Element already contained within + the first SeekHead element. + + The second SeekHead element MAY be stored in any order relative to + the other Top-Level Elements. Whether one or two SeekHead elements + are used, the SeekHead element(s) MUST collectively reference the + identity and position of all Top-Level Elements except for the first + SeekHead element. + +6.4. Cues (Index) + + The Cues element is RECOMMENDED to optimize seeking access in + Matroska. It is programmatically simpler to add the Cues element + after all Cluster elements have been written because this does not + require a prediction of how much space to reserve before writing the + Cluster elements. However, storing the Cues element before the + Cluster elements can provide some seeking advantages. If the Cues + element is present, then it SHOULD either be stored before the first + Cluster element or be referenced by a SeekHead element. + +6.5. Info + + The first Info element SHOULD occur before the first Tracks element + and first Cluster element except when referenced by a SeekHead + element. + +6.6. Chapters Element + + The Chapters element SHOULD be placed before the Cluster element(s). + The Chapters element can be used during playback even if the user + does not need to seek. It immediately gives the user information + about what section is being read and what other sections are + available. + + In the case of Ordered Chapters, it is RECOMMENDED to evaluate the + logical linking before playing. The Chapters element SHOULD be + placed before the first Tracks element and after the first Info + element. + +6.7. Attachments + + The Attachments element is not intended to be used by default when + playing the file but could contain information relevant to the + content, such as cover art or fonts. Cover art is useful even before + the file is played, and fonts could be needed before playback starts + for the initialization of subtitles. The Attachments element MAY be + placed before the first Cluster element; however, if the Attachments + element is likely to be edited, then it SHOULD be placed after the + last Cluster element. + +6.8. Tags + + The Tags element is most subject to changes after the file was + originally created. For easier editing, the Tags element can be + placed at the end of the Segment element, even after the Attachments + element. On the other hand, it is inconvenient to have to seek in + the Segment for tags, especially for network streams; thus, it's + better if the Tags element is found early in the stream. When + editing the Tags element, the original Tags element at the beginning + can be overwritten with a Void element and a new Tags element written + at the end of the Segment element. The file and Segment sizes will + only marginally change. + +7. Matroska Versioning + + Matroska is based on the principle that a reading application does + not have to support 100% of the specifications in order to be able to + play the file. Therefore, a Matroska file contains version + indicators that tell a reading application what to expect. + + It is possible and valid to have the version fields indicate that the + file contains Matroska elements from a higher specification version + number while signaling that a reading application MUST only support a + lower version number properly in order to play it back (possibly with + a reduced feature set). + + The EBML Header of each Matroska document informs the reading + application on what version of Matroska to expect. The elements + within the EBML Header with jurisdiction over this information are + DocTypeVersion and DocTypeReadVersion. + + DocTypeVersion MUST be equal to or greater than the highest Matroska + version number of any element present in the Matroska file. For + example, a file using the SimpleBlock element (Section 5.1.3.4) MUST + have a DocTypeVersion equal to or greater than 2. A file containing + CueRelativePosition elements (Section 5.1.5.1.2.3) MUST have a + DocTypeVersion equal to or greater than 4. + + The DocTypeReadVersion MUST contain the minimum version number that a + reading application can minimally support in order to play the file + back -- optionally with a reduced feature set. For example, if a + file contains only elements of version 2 or lower except for + CueRelativePosition (which is a version 4 Matroska element), then + DocTypeReadVersion SHOULD still be set to 2 and not 4 because + evaluating CueRelativePosition is not necessary for standard playback + -- it makes seeking more precise if used. + + A reading application supporting Matroska version V MUST NOT refuse + to read a file with DocReadTypeVersion equal to or lower than V, even + if DocTypeVersion is greater than V. + + A reading application supporting at least Matroska version V and + reading a file whose DocTypeReadVersion field is equal to or lower + than V MUST skip Matroska/EBML elements it encounters but does not + know about if that unknown element fits into the size constraints set + by the current Parent Element. + +8. Stream Copy + + It is sometimes necessary to create a Matroska file from another + Matroska file, for example, to add subtitles in a language or to edit + out a portion of the content. Some values from the original Matroska + file need to be kept the same in the destination file. For example, + the SamplingFrequency of an audio track wouldn't change between the + two files. Some other values may change between the two files, for + example, the TrackNumber of an audio track when another track has + been added. + + An element is marked with a property "stream copy: True" when the + values of that element need to be kept identical between the source + and destination files. If that property is not set, elements may or + may not keep the same value between the source and destination files. + +9. DefaultDecodedFieldDuration + + The DefaultDecodedFieldDuration element can signal to the displaying + application how often fields of a video sequence will be available + for displaying. It can be used for both interlaced and progressive + content. + + If the video sequence is signaled as interlaced + (Section 5.1.4.1.28.1), then DefaultDecodedFieldDuration equals the + period between two successive fields at the output of the decoding + process. For video sequences signaled as progressive, + DefaultDecodedFieldDuration is half of the period between two + successive frames at the output of the decoding process. + + These values are valid at the end of the decoding process before + post-processing (such as deinterlacing or inverse telecine) is + applied. + + Examples: + + * Blu-ray movie: 1000000000 ns/(48/1.001) = 20854167 ns + + * PAL broadcast/DVD: 1000000000 ns/(50/1.000) = 20000000 ns + + * N/ATSC broadcast: 1000000000 ns/(60/1.001) = 16683333 ns + + * Hard-telecined DVD: 1000000000 ns/(60/1.001) = 16683333 ns (60 + encoded interlaced fields per second) + + * Soft-telecined DVD: 1000000000 ns/(60/1.001) = 16683333 ns (48 + encoded interlaced fields per second, with "repeat_first_field = + 1") + +10. Cluster Blocks + + Frames using references SHOULD be stored in "coding order" (i.e., the + references first and then the frames referencing them). A + consequence is that timestamps might not be consecutive. However, a + frame with a past timestamp MUST reference a frame already known; + otherwise, it is considered bad/void. + + Matroska has two similar ways to store frames in a block: + + * in a Block that is contained inside a BlockGroup + + * in a SimpleBlock that is directly in the Cluster + + The SimpleBlock is usually preferred unless some extra elements of + the BlockGroup need to be used. A Matroska Reader MUST support both + types of blocks. + + Each block contains the same parts in the following order: + + * a variable-length header + + * the lacing information (optional) + + * the consecutive frame(s) + + The block header starts with the number of the Track it corresponds + to. The value MUST correspond to the TrackNumber (Section 5.1.4.1.1) + of a TrackEntry of the Segment. + + The TrackNumber is coded using the Variable-Size Integer (VINT) + mechanism described in Section 4 of [RFC8794]. To save space, the + shortest VINT form SHOULD be used. The value can be coded using up + to 8 octets. This is the only element with a variable size in the + block header. + + The timestamp is expressed in Track Ticks; see Section 11.1. The + value is stored as a signed value on 16 bits. + +10.1. Block Structure + + This section describes the binary data contained in the Block element + (Section 5.1.3.5.1). Bit 0 is the most significant bit. + + As the TrackNumber size can vary between 1 and 8 octets, there are 8 + different sizes for the Block header. The definitions for + TrackNumber sizes of 1 and 2 are provided; the other variants can be + deduced by extending the size of the TrackNumber by multiples of 8 + bits. + + 0 1 2 3 + 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | | |I|LAC|U| + | Track Number | Timestamp | Rsvrd |N|ING|N| + | | | |V| |U| + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + Figure 11: Block Header with 1-Octet TrackNumber + + 0 1 2 3 + 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Track Number | Timestamp | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | |I|LAC|U| + | Rsvrd |N|ING|N| ... + | |V| |U| + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + Figure 12: Block Header with 2-Octet TrackNumber + + where: + + Track Number: 8, 16, 24, 32, 40, 48, or 56 bits. An EBML VINT-coded + track number. + + Timestamp: 16 bits. Signed timestamp in Track Ticks. + + Rsvrd: 4 bits. Reserved bits MUST be set to 0. + + INV: 1 bit. Invisible; The codec SHOULD decode this frame but not + display it. + + LACING: 2 bits. Uses lacing mode. + + 00b: no lacing (Section 10.3.1) + 01b: Xiph lacing (Section 10.3.2) + 11b: EBML lacing (Section 10.3.3) + 10b: fixed-size lacing (Section 10.3.4) + + UNU: 1 bit. Unused bit. + + The remaining data in the Block corresponds to the lacing data and + frames usage as described in each respective lacing mode (see + Section 10.3). + +10.2. SimpleBlock Structure + + This section describes the binary data contained in the SimpleBlock + element (Section 5.1.3.4). Bit 0 is the most significant bit. + + The SimpleBlock structure is inspired by the Block structure; see + Section 10.1. The main differences are the added Keyframe flag and + Discardable flag. Otherwise, everything is the same. + + As the TrackNumber size can vary between 1 and 8 octets, there are 8 + different sizes for the SimpleBlock header. The definitions for + TrackNumber sizes of 1 and 2 are provided; the other variants can be + deduced by extending the size of the TrackNumber by multiples of 8 + bits. + + 0 1 2 3 + 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | |K| |I|LAC|D| + | Track Number | Timestamp |E|Rsvrd|N|ING|I| + | | |Y| |V| |S| + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + Figure 13: SimpleBlock Header with 1-Octet TrackNumber + + 0 1 2 3 + 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Track Number | Timestamp | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + |K| |I|LAC|D| + |E|Rsvrd|N|ING|I| ... + |Y| |V| |S| + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + Figure 14: SimpleBlock Header with 2-Octet TrackNumber + + where: + + Track Number: 8, 16, 24, 32, 40, 48, or 56 bits. An EBML VINT-coded + track number. + + Timestamp: 16 bits. Signed timestamp in Track Ticks. + + KEY: 1 bit. Keyframe; Set when the Block contains only keyframes. + + Rsvrd: 3 bits. Reserved bits MUST be set to 0. + + INV: 1 bit. Invisible; the codec SHOULD decode this frame but not + display it. + + LACING: 2 bits. Uses lacing mode. + + 00b: no lacing (Section 10.3.1) + 01b: Xiph lacing (Section 10.3.2) + 11b: EBML lacing (Section 10.3.3) + 10b: fixed-size lacing (Section 10.3.4) + + DIS: 1 bit. Discardable; The frames of the Block can be discarded + during playing if needed. + + The remaining data in the SimpleBlock corresponds to the lacing data + and frames usage as described in each respective lacing mode (see + Section 10.3). + +10.3. Block Lacing + + Lacing is a mechanism to save space when storing data. It is + typically used for small blocks of data (referred to as frames in + Matroska). It packs multiple frames into a single Block or + SimpleBlock. + + Lacing MUST NOT be used to store a single frame in a Block or + SimpleBlock. + + There are three types of lacing: + + * Xiph, which is inspired by what is found in the Ogg container + [RFC3533] + + * EBML, which is the same with sizes coded differently + + * Fixed-size, where the size is not coded + + When lacing is not used, i.e., to store a single frame, the lacing + bits (bits 5 and 6) of the Block or SimpleBlock MUST be set to zero. + + For example, a user wants to store three frames of the same track. + The first frame is 800 octets long, the second is 500 octets long, + and the third is 1000 octets long. Because these frames are small, + they can be stored in a lace to save space. + + It is possible to not use lacing at all and just store a single frame + without any extra data. When the FlagLacing (Section 5.1.4.1.12) is + set to 0, all blocks of that track MUST NOT use lacing. + +10.3.1. No Lacing + + When no lacing is used, the number of frames in the lace is omitted, + and only one frame can be stored in the Block. The LACING bits of + the Block Header flags are set to 00b. + + The Block for an 800-octet frame is as follows: + + +=============+=========+===================+ + | Block Octet | Value | Description | + +=============+=========+===================+ + | 4-803 | | Single frame data | + +-------------+---------+-------------------+ + + Table 35: No Lacing + + When a Block contains a single frame, it MUST use this "no lacing" + mode. + +10.3.2. Xiph Lacing + + The Xiph lacing uses the same coding of size as found in the Ogg + container [RFC3533]. The LACING bits of the Block Header flags are + set to 01b. + + The Block data with laced frames is stored as follows: + + * Lacing Head on 1 Octet: Number of frames in the lace minus 1. + + * Lacing size of each frame except the last one. + + * Binary data of each frame consecutively. + + The lacing size is split into 255 values, stored as unsigned octets + -- for example, 500 is coded 255;245 or [0xFF 0xF5]. A frame with a + size multiple of 255 is coded with a 0 at the end of the size -- for + example, 765 is coded 255;255;255;0 or [0xFF 0xFF 0xFF 0x00]. + + The size of the last frame is deduced from the size remaining in the + Block after the other frames. + + Because large sizes result in large coding of the sizes, it is + RECOMMENDED to use Xiph lacing only with small frames. + + In our example, the 800-, 500-, and 1000-octet frames are stored with + Xiph lacing in a Block as follows: + + +==============+=====================+==========================+ + | Block Octets | Value | Description | + +==============+=====================+==========================+ + | 4 | 0x02 | Number of frames minus 1 | + +--------------+---------------------+--------------------------+ + | 5-8 | 0xFF 0xFF 0xFF 0x23 | Size of the first frame | + | | | (255;255;255;35) | + +--------------+---------------------+--------------------------+ + | 9-10 | 0xFF 0xF5 | Size of the second frame | + | | | (255;245) | + +--------------+---------------------+--------------------------+ + | 11-810 | | First frame data | + +--------------+---------------------+--------------------------+ + | 811-1310 | | Second frame data | + +--------------+---------------------+--------------------------+ + | 1311-2310 | | Third frame data | + +--------------+---------------------+--------------------------+ + + Table 36: Xiph Lacing Example + + The Block is 2311 octets, and the last frame starts at 1311, so we + can deduce that the size of the last frame is 2311 - 1311 = 1000. + +10.3.3. EBML Lacing + + The EBML lacing encodes the frame size with an EBML-like encoding + [RFC8794]. The LACING bits of the Block Header flags are set to 11b. + + The Block data with laced frames is stored as follows: + + * Lacing Head on 1 Octet: Number of frames in the lace minus 1. + + * Lacing size of each frame except the last one. + + * Binary data of each frame consecutively. + + The first frame size is encoded as an EBML VINT value. The remaining + frame sizes are encoded as signed values using the difference between + the frame size and the previous frame size. These signed values are + encoded as VINT, with a mapping from signed to unsigned numbers. + Decoding the unsigned number stored in the VINT to a signed number is + done by subtracting 2^((7*n)-1)-1, where n is the octet size of the + VINT. + + +===================================+======================+ + | Bit Representation of Signed VINT | Possible Value Range | + +===================================+======================+ + | 1xxx xxxx | 2^7 values from | + | | -(2^6-1) to 2^6 | + +-----------------------------------+----------------------+ + | 01xx xxxx xxxx xxxx | 2^14 values from | + | | -(2^13-1) to 2^13 | + +-----------------------------------+----------------------+ + | 001x xxxx xxxx xxxx xxxx xxxx | 2^21 values from | + | | -(2^20-1) to 2^20 | + +-----------------------------------+----------------------+ + | 0001 xxxx xxxx xxxx xxxx xxxx | 2^28 values from | + | xxxx xxxx | -(2^27-1) to 2^27 | + +-----------------------------------+----------------------+ + | 0000 1xxx xxxx xxxx xxxx xxxx | 2^35 values from | + | xxxx xxxx xxxx xxxx | -(2^34-1) to 2^34 | + +-----------------------------------+----------------------+ + + Table 37: EBML Lacing Signed VINT Bits Usage + + In our example, the 800-, 500-, and 1000-octet frames are stored with + EBML lacing in a Block as follows: + + +==============+===========+=====================================+ + | Block Octets | Value | Description | + +==============+===========+=====================================+ + | 4 | 0x02 | Number of frames minus 1 | + +--------------+-----------+-------------------------------------+ + | 5-6 | 0x43 0x20 | Size of the first frame (800 = | + | | | 0x320 + 0x4000) | + +--------------+-----------+-------------------------------------+ + | 7-8 | 0x5E 0xD3 | Size of the second frame (500 - 800 | + | | | = -300 = - 0x12C + 0x1FFF + 0x4000) | + +--------------+-----------+-------------------------------------+ + | 8-807 | | First frame data | + +--------------+-----------+-------------------------------------+ + | 808-1307 | | Second frame data | + +--------------+-----------+-------------------------------------+ + | 1308-2307 | | Third frame data | + +--------------+-----------+-------------------------------------+ + + Table 38: EBML Lacing Example + + The Block is 2308 octets, and the last frame starts at 1308, so we + can deduce that the size of the last frame is 2308 - 1308 = 1000. + +10.3.4. Fixed-size Lacing + + Fixed-size lacing doesn't store the frame size; rather, it only + stores the number of frames in the lace. Each frame MUST have the + same size. The frame size of each frame is deduced from the total + size of the Block. The LACING bits of the Block Header flags are set + to 10b. + + The Block data with laced frames is stored as follows: + + * Lacing Head on 1 Octet: Number of frames in the lace minus 1. + + * Binary data of each frame consecutively. + + For example, for three frames that are 800 octets each: + + +==============+==========+==========================+ + | Block Octets | Value | Description | + +==============+==========+==========================+ + | 4 | 0x02 | Number of frames minus 1 | + +--------------+----------+--------------------------+ + | 5-804 | | First frame data | + +--------------+----------+--------------------------+ + | 805-1604 | | Second frame data | + +--------------+----------+--------------------------+ + | 1605-2404 | | Third frame data | + +--------------+----------+--------------------------+ + + Table 39: Fixed-Size Lacing Example + + This gives a Block of 2405 octets. When reading the Block, we find + that there are three frames (Octet 4). The data start at Octet 5, so + the size of each frame is (2405 - 5) / 3 = 800. + +10.3.5. Laced Frames Timestamp + + A Block only contains a single timestamp value. But when lacing is + used, it contains more than one frame. Each frame originally has its + own timestamp, or Presentation Timestamp (PTS). That timestamp + applies to the first frame in the lace. + + In the lace, each frame after the first one has an underdetermined + timestamp. However, each of these frames MUST be contiguous -- i.e., + the decoded data MUST NOT contain any gap between them. If there is + a gap in the stream, the frames around the gap MUST NOT be in the + same Block. + + Lacing is only useful for small contiguous data to save space. This + is usually the case for audio tracks and not the case for video + (which use a lot of data) or subtitle tracks (which have long gaps). + For audio, there is usually a fixed output sampling frequency for the + whole track, so the decoder should be able to recover the timestamp + of each sample, knowing each output sample is contiguous with a fixed + frequency. For subtitles, this is usually not the case, so lacing + SHOULD NOT be used. + +10.4. Random Access Points + + Random Access Points (RAPs) are positions where the parser can seek + to and start playback without decoding what was before. In Matroska, + BlockGroups and SimpleBlocks can be RAPs. To seek to these elements, + it is still necessary to seek to the Cluster containing them, read + the Cluster Timestamp, and start playback from the BlockGroup or + SimpleBlock that is a RAP. + + Because a Matroska File is usually composed of multiple tracks + playing at the same time -- video, audio, and subtitles -- to seek + properly to a RAP, each selected track must be taken into account. + Usually, all audio and subtitle BlockGroups or SimpleBlocks are RAPs. + They are independent of each other and can be played randomly. + + On the other hand, video tracks often use references to previous and + future frames for better coding efficiency. Frames with such + references MUST either contain one or more ReferenceBlock elements in + their BlockGroup or MUST be marked as non-keyframe in a SimpleBlock; + see Section 10.2. + + + 123456 + + + -40 + + + ... + + + Figure 15: BlockGroup with a Frame That References Another Frame, + with the EBML Tree Shown as XML + + + 123456 + (octet 3 bit 0 not set) + ... + + + Figure 16: SimpleBlock with a Frame That References Another + Frame, with the EBML Tree Shown as XML + + Frames that are RAPs (i.e., frames that don't depend on other frames) + MUST set the keyframe flag if they are in a SimpleBlock or their + parent BlockGroup MUST NOT contain a ReferenceBlock. + + + 123456 + + + + + ... + + + Figure 17: BlockGroup with a Frame That References No Other + Frame, with the EBML Tree Shown as XML + + + 123456 + (octet 3 bit 0 set) + ... + + + Figure 18: SimpleBlock with a Frame That References No Other + Frame, with the EBML Tree Shown as XML + + There may be cases where the use of BlockGroup is necessary, as the + frame may need a BlockDuration, BlockAdditions, CodecState, or + DiscardPadding element. For those cases, a SimpleBlock MUST NOT be + used; the reference information SHOULD be recovered for non-RAP + frames. + + + 123456 + (octet 3 bit 0 not set) + ... + + + Figure 19: SimpleBlock with a Frame That References Another + Frame, with the EBML Tree Shown as XML + + + 123456 + + + -40 + 20 + + + ... + + + Figure 20: Same Frame That References Another Frame Put inside a + BlockGroup to Add BlockDuration, with the EBML Tree Shown as XML + + When a frame in a BlockGroup is not a RAP, the BlockGroup MUST + contain at least a ReferenceBlock. The ReferenceBlocks MUST be used + in one of the following ways: + + * each reference frame listed as a ReferenceBlock, + + * some referenced frames listed as a ReferenceBlock, even if the + timestamp value is accurate, or + + * one ReferenceBlock with the timestamp value "0" corresponding to a + self or unknown reference. + + The lack of ReferenceBlock would mean such a frame is a RAP, and + seeking on that frame that actually depends on other frames may + create a bogus output or even crash. + + + 123456 + + + 0 + 20 + + + ... + + + Figure 21: Same Frame That References Another Frame Put inside a + BlockGroup, but the Reference Could Not Be Recovered, with the + EBML Tree Shown as XML + + + 123456 + + + -80 + + 40 + + + ... + + + Figure 22: BlockGroup with a Frame That References Two Other + Frames, with the EBML Tree Shown as XML + + Intra-only video frames, such as the ones found in AV1 or VP9, can be + decoded without any other frame, but they don't reset the codec + state. Thus, seeking to these frames is not possible, as the next + frames may need frames that are not known from this seeking point. + Such intra-only frames MUST NOT be considered as keyframes, so the + keyframe flag MUST NOT be set in the SimpleBlock or a ReferenceBlock + MUST be used to signify the frame is not a RAP. The timestamp value + of the ReferenceBlock MUST be "0", meaning it's referencing itself. + + + 123456 + + + 0 + + + ... + + + Figure 23: Intra-Only Frame (Not a RAP), with the EBML Tree Shown + as XML + + Because a video SimpleBlock has less information on references than a + video BlockGroup, it is possible to remux a video track using + BlockGroup into a SimpleBlock, as long as it doesn't use any other + BlockGroup features than ReferenceBlock. + +11. Timestamps + + Historically, timestamps in Matroska were mistakenly called + timecodes. The Timestamp element was called Timecode, the + TimestampScale element was called TimecodeScale, the + TrackTimestampScale element was called TrackTimecodeScale, and the + ReferenceTimestamp element was called ReferenceTimeCode. + +11.1. Timestamp Ticks + + All timestamp values in Matroska are expressed in multiples of a + tick. They are usually stored as integers. There are three types of + ticks possible: Matroska Ticks, Segment Ticks, and Track Ticks. + +11.1.1. Matroska Ticks + + The timestamp value is stored directly in nanoseconds. + + The elements storing values in Matroska Ticks/nanoseconds are: + + * TrackEntry\DefaultDuration; defined in Section 5.1.4.1.13 + + * TrackEntry\DefaultDecodedFieldDuration; defined in + Section 5.1.4.1.14 + + * TrackEntry\SeekPreRoll; defined in Section 5.1.4.1.26 + + * TrackEntry\CodecDelay; defined in Section 5.1.4.1.25 + + * BlockGroup\DiscardPadding; defined in Section 5.1.3.5.7 + + * ChapterAtom\ChapterTimeStart; defined in Section 5.1.7.1.4.3 + + * ChapterAtom\ChapterTimeEnd; defined in Section 5.1.7.1.4.4 + +11.1.2. Segment Ticks + + Elements in Segment Ticks involve the use of the TimestampScale + element of the Segment to get the timestamp in nanoseconds of the + element, with the following formula: + + timestamp in nanosecond = element value * TimestampScale + + This allows for storage of smaller integer values in the elements. + + When using the default value of "1,000,000" for TimestampScale, one + Segment Tick represents one millisecond. + + The elements storing values in Segment Ticks are: + + * Cluster\Timestamp; defined in Section 5.1.3.1 + + * Info\Duration is stored as a floating-point, but the same formula + applies; defined in Section 5.1.2.10 + + * CuePoint\CueTime; defined in Section 5.1.5.1.1 + + * CuePoint\CueTrackPositions\CueDuration; defined in + Section 5.1.5.1.2.4 + + * CueReference\CueRefTime; defined in Section 5.1.5.1.1 + +11.1.3. Track Ticks + + Elements in Track Ticks involve the use of the TimestampScale element + of the Segment and the TrackTimestampScale element of the Track to + get the timestamp in nanoseconds of the element, with the following + formula: + + timestamp in nanoseconds = + element value * TrackTimestampScale * TimestampScale + + This allows for storage of smaller integer values in the elements. + The resulting floating-point values of the timestamps are still + expressed in nanoseconds. + + When using the default values of "1,000,000" for TimestampScale and + "1.0" for TrackTimestampScale, one Track Tick represents one + millisecond. + + The elements storing values in Track Ticks are: + + * Cluster\BlockGroup\Block and Cluster\SimpleBlock timestamps; + detailed in Section 11.2 + + * Cluster\BlockGroup\BlockDuration; defined in Section 5.1.3.5.3 + + * Cluster\BlockGroup\ReferenceBlock; defined in Section 5.1.3.5.5 + + When the TrackTimestampScale is interpreted as "1.0", Track Ticks are + equivalent to Segment Ticks and give an integer value in nanoseconds. + This is the most common case as TrackTimestampScale is usually + omitted. + + A value of TrackTimestampScale other than "1.0" MAY be used to scale + the timestamps more in tune with each Track sampling frequency. For + historical reasons, a lot of Matroska Readers don't take the + TrackTimestampScale value into account. Thus, using a value other + than "1.0" might not work in many places. + +11.2. Block Timestamps + + A Block element and SimpleBlock element timestamp is the time when + the decoded data of the first frame in the Block/SimpleBlock MUST be + presented if the track of that Block/SimpleBlock is selected for + playback. This is also known as the Presentation Timestamp (PTS). + + The Block element and SimpleBlock element store their timestamps as + signed integers, relative to the Cluster\Timestamp value of the + Cluster they are stored in. To get the timestamp of a Block or + SimpleBlock in nanoseconds, the following formula is used: + + ( Cluster\Timestamp + ( block timestamp * TrackTimestampScale ) ) * + TimestampScale + + The Block element and SimpleBlock element store their timestamps as + 16-bit signed integers, allowing a range from "-32768" to "+32767" + Track Ticks. Although these values can be negative, when added to + the Cluster\Timestamp, the resulting frame timestamp SHOULD NOT be + negative. + + When a CodecDelay element is set, its value MUST be subtracted from + each Block timestamp of that track. To get the timestamp in + nanoseconds of the first frame in a Block or SimpleBlock, the formula + becomes: + + ( ( Cluster\Timestamp + ( block timestamp * TrackTimestampScale ) ) * + TimestampScale ) - CodecDelay + + The resulting frame timestamp SHOULD NOT be negative. + + During playback, when a frame has a negative timestamp, the content + MUST be decoded by the decoder but not played to the user. + +11.3. TimestampScale Rounding + + The default Track Tick duration is one millisecond. + + The TimestampScale is a floating-point value that is usually "1.0". + But when it's not, the multiplied Block Timestamp is a floating-point + value in nanoseconds. The Matroska Reader SHOULD use the nearest + rounding value in nanoseconds to get the proper nanosecond timestamp + of a Block. This allows some clever TimestampScale values to have a + more refined timestamp precision per frame. + +12. Language Codes + + Matroska versions 1 through 3 use language codes that can be either + the three-letter bibliographic ISO 639-2 form [ISO639-2] (like "fre" + for French) or such a language code followed by a dash and a country + code for specialities in languages (like "fre-ca" for Canadian + French). The ISO 639-2 Language elements are Language element, + TagLanguage element, and ChapLanguage element. + + Starting in Matroska version 4, the forms defined in either + [ISO639-2] or [RFC5646] MAY be used, although the form in [RFC5646] + is RECOMMENDED. The Language elements in the [RFC5646] form are + LanguageBCP47 element, TagLanguageBCP47 element, and + ChapLanguageBCP47 element. If both an [ISO639-2] Language element + and an [RFC5646] Language element are used within the same Parent + Element, then the Language element in the [ISO639-2] form MUST be + ignored and precedence given to the Language element in the [RFC5646] + form. + + In this document, "BCP47" in element names refers specifically to + [RFC5646], which is part of BCP 47. + +13. Country Codes + + Country codes are the [RFC5646] two-letter region subtags, without + the UK exception. + +14. Encryption + + This Matroska specification provides no interoperable solution for + securing the data container with any assurances of confidentiality, + integrity, authenticity, or authorization. The ContentEncryption + element (Section 5.1.4.1.31.8) and associated sub-fields + (Section 5.1.4.1.31.9 to Section 5.1.4.1.31.12) are defined only for + the benefit of implementers to construct their own proprietary + solution or as the basis for further standardization activities. How + to use these fields to secure a Matroska data container is out of + scope, as are any related issues such as key management and + distribution. + + A Matroska Reader who encounters containers that use the fields + defined in this section MUST rely on out-of-scope guidance to decode + the associated content. + + Because encryption occurs within the Block element, it is possible to + manipulate encrypted streams without decrypting them. The streams + could potentially be copied, deleted, cut, appended, or any number of + other possible editing techniques without decryption. The data can + be used without having to expose it or go through the decrypting + process. + + Encryption can also be layered within Matroska. This means that two + completely different types of encryption can be used, requiring two + separate keys to be able to decrypt a stream. + + Encryption information is stored in the ContentEncodings element + under the ContentEncryption element. + + For encryption systems sharing public/private keys, the creation of + the keys and the exchange of keys are not covered by this document. + They have to be handled by the system using Matroska. + + The algorithms described in Table 24 support different modes of + operations and key sizes. The specification of these parameters is + required for a complete solution but is out of scope of this document + and left to the proprietary implementations using them or subsequent + profiles of this document. + + The ContentEncodingScope element gives an idea of which part of the + track is encrypted, but each ContentEncAlgo element and its sub- + elements (like AESSettingsCipherMode) define exactly how the + encrypted track should be interpreted. + + An example of an extension that builds upon these security-related + fields in this specification is [WebM-Enc]. It uses AES-CTR, + ContentEncAlgo = 5 (Section 5.1.4.1.31.9), and AESSettingsCipherMode + = 1 (Section 5.1.4.1.31.12). + + A Matroska Writer MUST NOT use insecure cryptographic algorithms to + create new archives or streams, but a Matroska Reader MAY support + these algorithms to read previously made archives or streams. + +15. Image Presentation + +15.1. Cropping + + The PixelCrop elements (PixelCropTop, PixelCropBottom, + PixelCropRight, and PixelCropLeft) indicate when, and by how much, + encoded video frames SHOULD be cropped for display. These elements + allow edges of the frame that are not intended for display (such as + the sprockets of a full-frame film scan or the Video ANCillary (VANC) + area of a digitized analog videotape) to be stored but hidden. + PixelCropTop and PixelCropBottom store an integer of how many rows of + pixels SHOULD be cropped from the top and bottom of the image, + respectively. PixelCropLeft and PixelCropRight store an integer of + how many columns of pixels SHOULD be cropped from the left and right + of the image, respectively. + + For example, a pillar-boxed video that stores a 1440x1080 visual + image within the center of a padded 1920x1080 encoded image may set + both PixelCropLeft and PixelCropRight to "240", so a Matroska Player + should crop off 240 columns of pixels from the left and right of the + encoded image to present the image with the pillar-boxes hidden. + + Cropping has to be performed before resizing and the display + dimensions given by DisplayWidth, DisplayHeight, and DisplayUnit + apply to the already-cropped image. + +15.2. Rotation + + The ProjectionPoseRoll element (Section 5.1.4.1.28.46) can be used to + indicate that the image from the associated video track SHOULD be + rotated for presentation. For instance, the following example of the + Projection element (Section 5.1.4.1.28.41) and the ProjectionPoseRoll + element represents a video track where the image SHOULD be presented + with a 90-degree counter-clockwise rotation, with the EBML tree shown + as XML: + + + 90 + + + Figure 24: Rotation Example + +16. Segment Position + + The Segment Position of an element refers to the position of the + first octet of the Element ID of that element, measured in octets, + from the beginning of the Element Data section of the containing + Segment element. In other words, the Segment Position of an element + is the distance in octets from the beginning of its containing + Segment element minus the size of the Element ID and Element Data + Size of that Segment element. The Segment Position of the first + Child Element of the Segment element is 0. An element that is not + stored within a Segment element, such as the elements of the EBML + Header, do not have a Segment Position. + +16.1. Segment Position Exception + + Elements that are defined to store a Segment Position MAY define + reserved values to indicate a special meaning. + +16.2. Example of Segment Position + + This table presents an example of Segment Position by showing a + hexadecimal representation of a very small Matroska file with labels + to show the offsets in octets. The file contains a Segment element + with an Element ID of "0x18538067" and a MuxingApp element with an + Element ID of "0x4D80". + + 0 1 2 + 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 + +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + 0 |1A|45|DF|A3|8B|42|82|88|6D|61|74|72|6F|73|6B|61| + ^ EBML Header + 0 | |18|53|80|67| + ^ Segment ID + 20 |93| + ^ Segment Data Size + 20 | |15|49|A9|66|8E|4D|80|84|69|65|74|66|57|41|84|69|65|74|66| + ^ Start of Segment data + 20 | |4D|80|84|69|65|74|66|57|41|84|69|65|74|66| + ^ MuxingApp start + + In the above example, the Element ID of the Segment element is stored + at offset 16, the Element Data Size of the Segment element is stored + at offset 20, and the Element Data of the Segment element is stored + at offset 21. + + The MuxingApp element is stored at offset 26. Since the Segment + Position of an element is calculated by subtracting the position of + the Element Data of the containing Segment element from the position + of that element, the Segment Position of the MuxingApp element in the + above example is "26 - 21" or "5". + +17. Linked Segments + + Matroska provides several methods to link two or more Segment + elements together to create a Linked Segment. A Linked Segment is a + set of multiple Segments linked together into a single presentation + by using Hard Linking or Medium Linking. + + All Segments within a Linked Segment MUST have a SegmentUUID. + + All Segments within a Linked Segment SHOULD be stored within the same + directory or be quickly accessible based on their SegmentUUID in + order to have a seamless transition between segments. + + All Segments within a Linked Segment MAY set a SegmentFamily with a + common value to make it easier for a Matroska Player to know which + Segments are meant to be played together. + + The SegmentFilename, PrevFilename, and NextFilename elements MAY also + give hints on the original filenames that were used when the Segment + links were created, in case some SegmentUUIDs are damaged. + +17.1. Hard Linking + + Hard Linking, also called "splitting", is the process of creating a + Linked Segment by linking multiple Segment elements using the + NextUUID and PrevUUID elements. + + All Segments within a Hard Linked Segment MUST use the same Tracks + list and TimestampScale. + + Within a Linked Segment, the timestamps of Block and SimpleBlock MUST + consecutively follow the timestamps of Block and SimpleBlock from the + previous Segment in linking order. + + With Hard Linking, the chapters of any Segment within the Linked + Segment MUST only reference the current Segment. The NextUUID and + PrevUUID reference the respective SegmentUUID values of the next and + previous Segments. + + The first Segment of a Linked Segment MUST NOT have a PrevUUID + element. The last Segment of a Linked Segment MUST NOT have a + NextUUID element. + + For each node of the chain of Segments of a Linked Segment, at least + one Segment MUST reference the other Segment within the chain. + + In a chain of Segments of a Linked Segment, the NextUUID always takes + precedence over the PrevUUID. Thus, if SegmentA has a NextUUID to + SegmentB and SegmentB has a PrevUUID to SegmentC, the link to use is + NextUUID between SegmentA and SegmentB, and SegmentC is not part of + the Linked Segment. + + If SegmentB has a PrevUUID to SegmentA, but SegmentA has no NextUUID, + then the Matroska Player MAY consider these two Segments linked as + SegmentA followed by SegmentB. + + As an example, three Segments can be Hard Linked as a Linked Segment + through cross-referencing each other with SegmentUUID, PrevUUID, and + NextUUID as shown in this table: + + +==========+================+==================+==================+ + |file name |SegmentUUID | PrevUUID | NextUUID | + +==========+================+==================+==================+ + |start.mkv |71000c23cd310998| Invalid | a77b3598941cb803 | + | |53fbc94dd984a5dd| | eac0fcdafe44fac9 | + +----------+----------------+------------------+------------------+ + |middle.mkv|a77b3598941cb803| 71000c23cd310998 | 6c92285fa6d3e827 | + | |eac0fcdafe44fac9| 53fbc94dd984a5dd | b198d120ea3ac674 | + +----------+----------------+------------------+------------------+ + |end.mkv |6c92285fa6d3e827| a77b3598941cb803 | Invalid | + | |b198d120ea3ac674| eac0fcdafe44fac9 | | + +----------+----------------+------------------+------------------+ + + Table 40: Usual Hard Linking UIDs + + An example where only the NextUUID element is used: + + +============+==================+==========+==================+ + | file name | SegmentUUID | PrevUUID | NextUUID | + +============+==================+==========+==================+ + | start.mkv | 71000c23cd310998 | Invalid | a77b3598941cb803 | + | | 53fbc94dd984a5dd | | eac0fcdafe44fac9 | + +------------+------------------+----------+------------------+ + | middle.mkv | a77b3598941cb803 | n/a | 6c92285fa6d3e827 | + | | eac0fcdafe44fac9 | | b198d120ea3ac674 | + +------------+------------------+----------+------------------+ + | end.mkv | 6c92285fa6d3e827 | n/a | Invalid | + | | b198d120ea3ac674 | | | + +------------+------------------+----------+------------------+ + + Table 41: Hard Linking without PrevUUID + + An example where only the PrevUUID element is used: + + +============+==================+==================+==========+ + | file name | SegmentUUID | PrevUUID | NextUUID | + +============+==================+==================+==========+ + | start.mkv | 71000c23cd310998 | Invalid | n/a | + | | 53fbc94dd984a5dd | | | + +------------+------------------+------------------+----------+ + | middle.mkv | a77b3598941cb803 | 71000c23cd310998 | n/a | + | | eac0fcdafe44fac9 | 53fbc94dd984a5dd | | + +------------+------------------+------------------+----------+ + | end.mkv | 6c92285fa6d3e827 | a77b3598941cb803 | Invalid | + | | b198d120ea3ac674 | eac0fcdafe44fac9 | | + +------------+------------------+------------------+----------+ + + Table 42: Hard Linking without NextUUID + + An example where only the middle.mkv is using the PrevUUID and + NextUUID elements: + + +==========+================+==================+==================+ + |file name |SegmentUUID | PrevUUID | NextUUID | + +==========+================+==================+==================+ + |start.mkv |71000c23cd310998| Invalid | n/a | + | |53fbc94dd984a5dd| | | + +----------+----------------+------------------+------------------+ + |middle.mkv|a77b3598941cb803| 71000c23cd310998 | 6c92285fa6d3e827 | + | |eac0fcdafe44fac9| 53fbc94dd984a5dd | b198d120ea3ac674 | + +----------+----------------+------------------+------------------+ + |end.mkv |6c92285fa6d3e827| n/a | Invalid | + | |b198d120ea3ac674| | | + +----------+----------------+------------------+------------------+ + + Table 43: Hard Linking with Mixed UID Links + +17.2. Medium Linking + + Medium Linking creates relationships between Segments using Ordered + Chapters (Section 20.1.3) and the ChapterSegmentUUID element. A + Chapter Edition with Ordered Chapters MAY contain Chapters elements + that reference timestamp ranges from other Segments. The Segment + referenced by the Ordered Chapter via the ChapterSegmentUUID element + SHOULD be played as part of a Linked Segment. + + The timestamps of Segment content referenced by Ordered Chapters MUST + be adjusted according to the cumulative duration of the previous + Ordered Chapters. + + As an example, a file named intro.mkv could have a SegmentUUID of + "0xb16a58609fc7e60653a60c984fc11ead". Another file called + program.mkv could use a Chapter Edition that contains two Ordered + Chapters. The first chapter references the Segment of intro.mkv with + the use of a ChapterSegmentUUID, ChapterSegmentEditionUID, + ChapterTimeStart, and an optional ChapterTimeEnd element. The second + chapter references content within the Segment of program.mkv. A + Matroska Player SHOULD recognize the Linked Segment created by the + use of ChapterSegmentUUID in an enabled Edition and present the + reference content of the two Segments as a single presentation. + + The ChapterSegmentUUID represents the Segment that holds the content + to play in place of the Linked Chapter. The ChapterSegmentUUID MUST + NOT be the SegmentUUID of its own Segment. + + There are two ways to use a chapter link: + + * Linked-Duration linking + + * Linked-Edition linking + +17.2.1. Linked-Duration + + A Matroska Player MUST play the content of the Linked Segment from + the ChapterTimeStart until the ChapterTimeEnd timestamp in place of + the Linked Chapter. + + ChapterTimeStart and ChapterTimeEnd represent timestamps in the + Linked Segment matching the value of ChapterSegmentUUID. Their + values MUST be in the range of the Linked Segment duration. + + The ChapterTimeEnd value MUST be set when using Linked-Duration + chapter linking. ChapterSegmentEditionUID MUST NOT be set. + +17.2.2. Linked-Edition + + A Matroska Player MUST play the whole Linked Edition of the Linked + Segment in place of the Linked Chapter. + + ChapterSegmentEditionUID represents a valid Edition from the Linked + Segment matching the value of ChapterSegmentUUID. + + When using Linked-Edition chapter linking, ChapterTimeEnd is + OPTIONAL. + +18. Track Flags + +18.1. Default Flag + + The Default flag is a hint for a Matroska Player indicating that a + given track SHOULD be eligible to be automatically selected as the + default track for a given language. If no tracks in a given language + have the Default flag set, then all tracks in that language are + eligible for automatic selection. This can be used to indicate that + a track provides "regular service" that is suitable for users with + default settings, as opposed to specialized services, such as + commentary, captions for users with hearing impairments, or + descriptive audio. + + The Matroska Player MAY override the Default flag for any reason, + including user preferences to prefer tracks providing accessibility + services. + +18.2. Forced Flag + + The Forced flag tells the Matroska Player that it SHOULD display this + subtitle track, even if user preferences usually would not call for + any subtitles to be displayed alongside the audio track that is + currently selected. This can be used to indicate that a track + contains translations of on-screen text or dialogue spoken in a + different language than the track's primary language. + +18.3. Hearing-Impaired Flag + + The Hearing-Impaired flag tells the Matroska Player that it SHOULD + prefer this track when selecting a default track for a user with a + hearing impairment and that it MAY prefer to select a different track + when selecting a default track for a user that is not hearing + impaired. + +18.4. Visual-Impaired Flag + + The Visual-Impaired flag tells the Matroska Player that it SHOULD + prefer this track when selecting a default track for a user with a + visual impairment and that it MAY prefer to select a different track + when selecting a default track for a user that is not visually + impaired. + +18.5. Descriptions Flag + + The Descriptions flag tells the Matroska Player that this track is + suitable to play via a text-to-speech system for a user with a visual + impairment and that it SHOULD NOT automatically select this track + when selecting a default track for a user that is not visually + impaired. + +18.6. Original Flag + + The Original flag tells the Matroska Player that this track is in the + original language and that it SHOULD prefer this track if configured + to prefer original-language tracks of this track's type. + +18.7. Commentary Flag + + The Commentary flag tells the Matroska Player that this track + contains commentary on the content. + +18.8. Track Operation + + TrackOperation allows for the combination of multiple tracks to make + a virtual one. It uses two separate system to combine tracks. One + to create a 3D "composition" (left/right/background planes) and one + to simplify join two tracks together to make a single track. + + A track created with TrackOperation is a proper track with a UID and + all its flags. However, the codec ID is meaningless because each + "sub" track needs to be decoded by its own decoder before the + "operation" is applied. The Cues elements corresponding to such a + virtual track SHOULD be the union of the Cues elements for each of + the tracks it's composed of (when the Cues are defined per track). + + In the case of TrackJoinBlocks, the Block elements (from BlockGroup + and SimpleBlock) of all the tracks SHOULD be used as if they were + defined for this new virtual Track. When two Block elements have + overlapping start or end timestamps, it's up to the underlying system + to either drop some of these frames or render them the way they + overlap. This situation SHOULD be avoided when creating such tracks, + as you can never be sure of the end result on different platforms. + +18.9. Overlay Track + + An overlay track SHOULD be rendered in the same channel as the track + it's linked to. When content is found in such a track, it SHOULD be + played on the rendering channel instead of the original track. + +18.10. Multi-planar and 3D Videos + + There are two different ways to compress 3D videos: have each eye + track in a separate track and have one track have both eyes combined + inside (which is more efficient compression-wise). Matroska supports + both ways. + + For the single-track variant, there is the StereoMode element, which + defines how planes are assembled in the track (mono or left-right + combined). Odd values of StereoMode means the left plane comes first + for more convenient reading. The pixel count of the track + (PixelWidth/PixelHeight) is the raw number of pixels (for example, + 3840x1080 for full HD side by side), and the DisplayWidth/ + DisplayHeight in pixels is the number of pixels for one plane + (1920x1080 for that full HD stream). Old stereo 3D movies were + displayed using anaglyph (cyan and red colors separated). For + compatibility with such movies, there is a value of the StereoMode + that corresponds to anaglyph. + + There is also a "packed" mode (values 13 and 14) that consists of + packing two frames together in a Block that uses lacing. The first + frame is the left eye and the other frame is the right eye (or vice + versa). The frames SHOULD be decoded in that order and are possibly + dependent on each other (P and B frames). + + For separate tracks, Matroska needs to define exactly which track + does what. TrackOperation with TrackCombinePlanes does that. For + more details, see Section 18.8 on how TrackOperation works. + + The 3D support is still in infancy and may evolve to support more + features. + + The StereoMode used to be part of Matroska v2, but it didn't meet the + requirement for multiple tracks. There was also a bug in + [libmatroska] prior to 0.9.0 that would save/read it as 0x53B9 + instead of 0x53B8; see OldStereoMode (Section 5.1.4.1.28.5). + Matroska Readers MAY support these legacy files by checking Matroska + v2 or 0x53B9. The older values of StereoMode were 0 (mono), 1 (right + eye), 2 (left eye), and 3 (both eyes); these are the only values that + can be found in OldStereoMode. They are not compatible with the + StereoMode values found in Matroska v3 and above. + +19. Default Track Selection + + This section provides some example sets of Tracks and hypothetical + user settings, along with indications of which ones a similarly + configured Matroska Player SHOULD automatically select for playback + by default in such a situation. A player MAY provide additional + settings with more detailed controls for more nuanced scenarios. + These examples are provided as guidelines to illustrate the intended + usages of the various supported Track flags and their expected + behaviors. + + Track names are shown in English for illustrative purposes; actual + files may have titles in the language of each track or provide titles + in multiple languages. + +19.1. Audio Selection + + Example track set: + + +===+=====+====+======+========+=======+===============+===========+ + |No.|Type |Lang|Layout|Original|Default|Other Flags |Name | + +===+=====+====+======+========+=======+===============+===========+ + |1 |Video|und |N/A |N/A |N/A |None | | + +---+-----+----+------+--------+-------+---------------+-----------+ + |2 |Audio|eng |5.1 |1 |1 |None | | + +---+-----+----+------+--------+-------+---------------+-----------+ + |3 |Audio|eng |2.0 |1 |1 |None | | + +---+-----+----+------+--------+-------+---------------+-----------+ + |4 |Audio|eng |2.0 |1 |0 |Visual-Impaired|Descriptive| + | | | | | | | |audio | + +---+-----+----+------+--------+-------+---------------+-----------+ + |5 |Audio|esp |5.1 |0 |1 |None | | + +---+-----+----+------+--------+-------+---------------+-----------+ + |6 |Audio|esp |2.0 |0 |0 |Visual-Impaired|Descriptive| + | | | | | | | |audio | + +---+-----+----+------+--------+-------+---------------+-----------+ + |7 |Audio|eng |2.0 |1 |0 |Commentary |Director's | + | | | | | | | |Commentary | + +---+-----+----+------+--------+-------+---------------+-----------+ + |8 |Audio|eng |2.0 |1 |0 |None |Karaoke | + +---+-----+----+------+--------+-------+---------------+-----------+ + + Table 44: Audio Tracks for Default Selection + + The table above shows a file with seven audio tracks -- five in + English and two in Spanish. + + The English tracks all have the Original flag, indicating that + English is the original content language. + + Generally, the player will first consider the track languages. If + the player has an option to prefer original-language audio and the + user has enabled it, then it should prefer one of the tracks with the + Original flag. If the user has configured to specifically prefer + audio tracks in English or Spanish, the player should select one of + the tracks in the corresponding language. The player may also wish + to prefer a track with the Original flag if no tracks matching any of + the user's explicitly preferred languages are available. + + Two of the tracks have the Visual-Impaired flag. If the player has + been configured to prefer such tracks, it should select one; + otherwise, it should avoid them if possible. + + If selecting an English track, when other settings have left multiple + possible options, it may be useful to exclude the tracks that lack + the Default flag. Here, one provides descriptive service for + individuals with visual impairments (which has its own flag and may + be automatically selected by user configuration but is unsuitable for + users with default-configured players), one is a commentary track + (which has its own flag and the player may or may not have + specialized handling for), and the last contains karaoke versions of + the music that plays during the film (which is an unusual specialized + audio service that Matroska has no built-in support for indicating, + so it's indicated in the track name instead). By not setting the + Default flag on these specialized tracks, the file's author hints + that they should not be automatically selected by a default- + configured player. + + Having narrowed its choices down, the example player now may have to + select between tracks 2 and 3. The only difference between these + tracks is their channel layouts: 2 is 5.1 surround, while 3 is + stereo. If the player is aware that the output device is a pair of + headphones or stereo speakers, it may wish to prefer the stereo mix + automatically. On the other hand, if it knows that the device is a + surround system, it may wish to prefer the surround mix. + + If the player finishes analyzing all of the available audio tracks + and finds that more than one seem equally and maximally preferable, + it SHOULD default to the first of the group. + +19.2. Subtitle Selection + + Example track set: + + +===+=========+====+========+=======+======+========+==============+ + |No.|Type |Lang|Original|Default|Forced|Other | Name | + | | | | | | |Flags | | + +===+=========+====+========+=======+======+========+==============+ + |1 |Video |und |N/A |N/A |N/A |None | | + +---+---------+----+--------+-------+------+--------+--------------+ + |2 |Audio |fra |1 |1 |N/A |None | | + +---+---------+----+--------+-------+------+--------+--------------+ + |3 |Audio |por |0 |1 |N/A |None | | + +---+---------+----+--------+-------+------+--------+--------------+ + |4 |Subtitles|fra |1 |1 |0 |None | | + +---+---------+----+--------+-------+------+--------+--------------+ + |5 |Subtitles|fra |1 |0 |0 |Hearing-| Captions for | + | | | | | | |Impaired| users with | + | | | | | | | | hearing | + | | | | | | | | impairments | + +---+---------+----+--------+-------+------+--------+--------------+ + |6 |Subtitles|por |0 |1 |0 |None | | + +---+---------+----+--------+-------+------+--------+--------------+ + |7 |Subtitles|por |0 |0 |1 |None | Signs | + +---+---------+----+--------+-------+------+--------+--------------+ + |8 |Subtitles|por |0 |0 |0 |Hearing-| SDH | + | | | | | | |Impaired| | + +---+---------+----+--------+-------+------+--------+--------------+ + + Table 45: Subtitle Tracks for Default Selection + + The table above shows two audio tracks and five subtitle tracks. As + we can see, French is the original language. + + We'll start by discussing the case where the user prefers French (or + original-language) audio (or has explicitly selected the French audio + track) and also prefers French subtitles. + + In this case, if the player isn't configured to display captions when + the audio matches their preferred subtitle languages, the player + doesn't need to select a subtitle track at all. + + If the user _has_ indicated that they want captions to be displayed, + the selection simply comes down to whether hearing-impaired subtitles + are preferred. + + The situation for a user who prefers Portuguese subtitles starts out + somewhat analogous. If they select the original French audio (either + by explicit audio language preference, preference for original- + language tracks, or explicitly selecting that track), then the + selection once again comes down to the hearing-impaired preference. + + However, the case where the Portuguese audio track is selected has an + important catch: a Forced track in Portuguese is present. This may + contain translations of on-screen text from the video track or of + portions of the audio that are not translated (music, for instance). + This means that even if the user's preferences wouldn't normally call + for captions here, the Forced track should be selected nonetheless, + rather than selecting no track at all. On the other hand, if the + user's preferences _do_ call for captions, the non-Forced tracks + should be preferred, as the Forced track will not contain captioning + for the dialogue. + +20. Chapters + + The Matroska Chapters system can have multiple Editions, and each + Edition can consist of Simple Chapters where a chapter start time is + used as a marker in the timeline only. An Edition can be more + complex with Ordered Chapters where a chapter end timestamp is + additionally used or much more complex with Linked Chapters. The + Matroska Chapters system can also have a menu structure borrowed from + the DVD-menu system [DVD-Video] or have its own built-in Matroska + menu structure. + +20.1. EditionEntry + + The EditionEntry is also called an Edition. An Edition contains a + set of Edition flags and MUST contain at least one ChapterAtom + element. Chapters are always inside an Edition (or a Chapter itself + is part of an Edition). Multiple Editions are allowed. Some of + these Editions MAY be ordered and others not. + +20.1.1. EditionFlagDefault + + Only one Edition SHOULD have an EditionFlagDefault flag set to true. + +20.1.2. Default Edition + + The Default Edition is the Edition that a Matroska Player SHOULD use + for playback by default. + + The first Edition with the EditionFlagDefault flag set to true is the + Default Edition. + + When all EditionFlagDefault flags are set to false, then the first + Edition is the Default Edition. + + +===========+=============+=================+ + | Edition | FlagDefault | Default Edition | + +===========+=============+=================+ + | Edition 1 | true | X | + +-----------+-------------+-----------------+ + | Edition 2 | true | | + +-----------+-------------+-----------------+ + | Edition 3 | true | | + +-----------+-------------+-----------------+ + + Table 46: Default Edition, All Default + + +===========+=============+=================+ + | Edition | FlagDefault | Default Edition | + +===========+=============+=================+ + | Edition 1 | false | X | + +-----------+-------------+-----------------+ + | Edition 2 | false | | + +-----------+-------------+-----------------+ + | Edition 3 | false | | + +-----------+-------------+-----------------+ + + Table 47: Default Edition, No Default + + +===========+=============+=================+ + | Edition | FlagDefault | Default Edition | + +===========+=============+=================+ + | Edition 1 | false | | + +-----------+-------------+-----------------+ + | Edition 2 | true | X | + +-----------+-------------+-----------------+ + | Edition 3 | false | | + +-----------+-------------+-----------------+ + + Table 48: Default Edition, With Default + +20.1.3. EditionFlagOrdered + + The EditionFlagOrdered flag is a significant feature, as it enables + an Edition of Ordered Chapters that defines and arranges a virtual + timeline rather than simply labeling points within the timeline. For + example, with Editions of Ordered Chapters, a single Matroska file + can present multiple edits of a film without duplicating content. + Alternatively, if a videotape is digitized in full, one Ordered + Edition could present the full content (including colorbars, + countdown, slate, a feature presentation, and black frames), while + another Edition of Ordered Chapters can use Chapters that only mark + the intended presentation with the colorbars and other ancillary + visual information excluded. If an Edition of Ordered Chapters is + enabled, then the Matroska Player MUST play those Chapters in their + stored order from the timestamp marked in the ChapterTimeStart + element to the timestamp marked in to ChapterTimeEnd element. + + If the EditionFlagOrdered flag evaluates to "0", Simple Chapters are + used and only the ChapterTimeStart of a Chapter is used as a chapter + mark to jump to the predefined point in the timeline. With Simple + Chapters, a Matroska Player MUST ignore certain elements inside a + Chapters element. In that case, these elements are informational + only. + + The following list shows the different Chapters elements only found + in Ordered Chapters. + + * ChapterAtom\ChapterSegmentUUID + + * ChapterAtom\ChapterSegmentEditionUID + + * ChapterAtom\ChapProcess + + * Info\ChapterTranslate + + * TrackEntry\TrackTranslate + + Furthermore, there are other EBML elements that could be used if the + EditionFlagOrdered evaluates to "1". + +20.1.3.1. Ordered-Edition and Matroska Segment Linking + + Hard Linking: Ordered Chapters supersede the Hard Linking. + + Medium Linking: Ordered Chapters are used in a normal way and can be + combined with the ChapterSegmentUUID element, which establishes a + link to another Segment. + + See Section 17 on Linked Segments for more information about Hard + Linking and Medium Linking. + +20.2. ChapterAtom + + The ChapterAtom is also called a Chapter. + +20.2.1. ChapterTimeStart + + ChapterTimeStart is the timestamp of the start of Chapter with + nanosecond accuracy and is not scaled by TimestampScale. For Simple + Chapters, this is the position of the chapter markers in the + timeline. + +20.2.2. ChapterTimeEnd + + ChapterTimeEnd is the timestamp of the end of Chapter with nanosecond + accuracy and is not scaled by TimestampScale. The timestamp defined + by the ChapterTimeEnd is not part of the Chapter. A Matroska Player + calculates the duration of this Chapter using the difference between + the ChapterTimeEnd and ChapterTimeStart. The end timestamp MUST be + greater than or equal to the start timestamp. + + When the ChapterTimeEnd timestamp is equal to the ChapterTimeStart + timestamp, the timestamp is included in the Chapter. It can be + useful to put markers in a file or add chapter commands with ordered + chapter commands without having to play anything; see + Section 5.1.7.1.4.14. + + +===========+=================+===============+===============+ + | Chapter | Start timestamp | End timestamp | Duration | + +===========+=================+===============+===============+ + | Chapter 1 | 0 | 1000000000 | 1000000000 | + +-----------+-----------------+---------------+---------------+ + | Chapter 2 | 1000000000 | 5000000000 | 4000000000 | + +-----------+-----------------+---------------+---------------+ + | Chapter 3 | 6000000000 | 6000000000 | 0 | + +-----------+-----------------+---------------+---------------+ + | Chapter 4 | 9000000000 | 8000000000 | Invalid | + | | | | (-1000000000) | + +-----------+-----------------+---------------+---------------+ + + Table 49: ChapterTimeEnd Usage Possibilities + +20.2.3. Nested Chapters + + A ChapterAtom element can contain other ChapterAtom elements. That + element is a Parent Chapter, and the ChapterAtom elements it contains + are Nested Chapters. + + Nested Chapters can be useful to tag small parts of a Segment that + already have tags or add Chapter Codec commands on smaller parts of a + Segment that already have Chapter Codec commands. + + The ChapterTimeStart of a Nested Chapter MUST be greater than or + equal to the ChapterTimeStart of its Parent Chapter. + + If the Parent Chapter of a Nested Chapter has a ChapterTimeEnd, the + ChapterTimeStart of that Nested Chapter MUST be smaller than or equal + to the ChapterTimeEnd of the Parent Chapter. + +20.2.4. Nested Chapters in Ordered Chapters + + The ChapterTimeEnd of the lowest level of Nested Chapters MUST be set + for Ordered Chapters. + + When used with Ordered Chapters, the ChapterTimeEnd value of a Parent + Chapter is useless for playback, as the proper playback sections are + described in its Nested Chapters. The ChapterTimeEnd SHOULD NOT be + set in Parent Chapters and MUST be ignored for playback. + +20.2.5. ChapterFlagHidden + + Each Chapter's ChapterFlagHidden flag works independently of Parent + Chapters. A Nested Chapter with a ChapterFlagHidden flag that + evaluates to "0" remains visible in the user interface even if the + Parent Chapter's ChapterFlagHidden flag is set to "1". + + +==========================+===================+=========+ + | Chapter + Nested Chapter | ChapterFlagHidden | visible | + +==========================+===================+=========+ + | Chapter 1 | 0 | yes | + +--------------------------+-------------------+---------+ + | Nested Chapter 1.1 | 0 | yes | + +--------------------------+-------------------+---------+ + | Nested Chapter 1.2 | 1 | no | + +--------------------------+-------------------+---------+ + | Chapter 2 | 1 | no | + +--------------------------+-------------------+---------+ + | Nested Chapter 2.1 | 0 | yes | + +--------------------------+-------------------+---------+ + | Nested Chapter 2.2 | 1 | no | + +--------------------------+-------------------+---------+ + + Table 50: ChapterFlagHidden Nested Visibility + +20.3. Menu Features + + The menu features are handled like a chapter codec. That means each + codec has a type, some private data, and some data in the chapters. + + The type of the menu system is defined by the ChapProcessCodecID + parameter. For now, only two values are supported: 0 (Matroska + Script) and 1 (menu borrowed from the DVD [DVD-Video]). The private + data stored in ChapProcessPrivate and ChapProcessData depends on the + ChapProcessCodecID value. + + The menu system, as well as Chapter Codecs in general, can perform + actions on the Matroska Player, such as jumping to another Chapter or + Edition, selecting different tracks, and possibly more. The scope of + all the possibilities of Chapter Codecs is not covered in this + document, as it depends on the Chapter Codec features and its + integration in a Matroska Player. + +20.4. Physical Types + + Each level can have different meanings for audio and video. The + ORIGINAL_MEDIA_TYPE tag [MatroskaTags] can be used to specify a + string for ChapterPhysicalEquiv = 60. Here is the list of possible + levels for both audio and video: + + +=======+=======================+=============+=====================+ + | Value | Audio | Video | Comment | + +=======+=======================+=============+=====================+ + | 70 | SET / PACKAGE | SET / | the collection of | + | | | PACKAGE | different media | + +-------+-----------------------+-------------+---------------------+ + | 60 | CD / 12" / 10" / 7" / | DVD / VHS | the physical medium | + | | TAPE / MINIDISC / DAT | / | like a CD or a DVD | + | | | LASERDISC | | + +-------+-----------------------+-------------+---------------------+ + | 50 | SIDE | SIDE | when the original | + | | | | medium (LP/DVD) has | + | | | | different sides | + +-------+-----------------------+-------------+---------------------+ + | 40 | - | LAYER | another physical | + | | | | level on DVDs | + +-------+-----------------------+-------------+---------------------+ + | 30 | SESSION | SESSION | as found on CDs and | + | | | | DVDs | + +-------+-----------------------+-------------+---------------------+ + | 20 | TRACK | - | as found on audio | + | | | | CDs | + +-------+-----------------------+-------------+---------------------+ + | 10 | INDEX | - | the first logical | + | | | | level of the side/ | + | | | | medium | + +-------+-----------------------+-------------+---------------------+ + + Table 51: ChapterPhysicalEquiv Meaning per Track Type + +20.5. Chapter Examples + +20.5.1. Example 1: Basic Chaptering + + In this example, a movie is split in different chapters. It could + also just be an audio file (album) in which each track corresponds to + a chapter. + + * 00000 ms - 05000 ms: Intro + * 05000 ms - 25000 ms: Before the crime + * 25000 ms - 27500 ms: The crime + * 27500 ms - 38000 ms: After the crime + * 38000 ms - 43000 ms: Credits + + This translates to Matroska form, with the EBML tree shown as follows + in XML: + + + + 16603393396715046047 + + 1193046 + 0 + 5000000000 + + Intro + + + + 2311527 + 5000000000 + 25000000000 + + Before the crime + + + Avant le crime + fra + + + + 3430008 + 25000000000 + 27500000000 + + The crime + + + Le crime + fra + + + + 4548489 + 27500000000 + 38000000000 + + After the crime + + + Apres le crime + fra + + + + 5666960 + 38000000000 + 43000000000 + + Credits + + + Generique + fra + + + + + + Figure 25: Basic Chapters Example + +20.5.2. Example 2: Nested Chapters + + In this example, an (existing) album is split into different + chapters, and one of them contains another splitting. + +20.5.2.1. The Micronauts "Bleep To Bleep" + + * 00:00 - 12:28: Baby wants to Bleep/Rock + - 00:00 - 04:38: Baby wants to bleep (pt.1) + - 04:38 - 07:12: Baby wants to rock + - 07:12 - 10:33: Baby wants to bleep (pt.2) + - 10:33 - 12:28: Baby wants to bleep (pt.3) + * 12:30 - 19:38: Bleeper_O+2 + * 19:40 - 22:20: Baby wants to bleep (pt.4) + * 22:22 - 25:18: Bleep to bleep + * 25:20 - 33:35: Baby wants to bleep (k) + * 33:37 - 44:28: Bleeper + + This translates to Matroska form, with the EBML tree shown as follows + in XML: + + + + 1281690858003401414 + + 1 + 0 + 748000000 + + Baby wants to Bleep/Rock + + + 2 + 0 + 278000000 + + Baby wants to bleep (pt.1) + + + + 3 + 278000000 + 432000000 + + Baby wants to rock + + + + 4 + 432000000 + 633000000 + + Baby wants to bleep (pt.2) + + + + 5 + 633000000 + 748000000 + + Baby wants to bleep (pt.3) + + + + + 6 + 750000000 + 1178500000 + + Bleeper_O+2 + + + + 7 + 1180500000 + 1340000000 + + Baby wants to bleep (pt.4) + + + + 8 + 1342000000 + 1518000000 + + Bleep to bleep + + + + 9 + 1520000000 + 2015000000 + + Baby wants to bleep (k) + + + + 10 + 2017000000 + 2668000000 + + Bleeper + + + + + + Figure 26: Nested Chapters Example + +21. Attachments + + Matroska supports storage of related files and data in the + Attachments element (a Top-Level Element). Attachments elements can + be used to store related cover art, font files, transcripts, reports, + error recovery files, pictures, text-based annotations, copies of + specifications, or other ancillary files related to the Segment. + + Matroska Readers MUST NOT execute files stored as Attachments + elements. + +21.1. Cover Art + + This section defines a set of guidelines for the storage of cover art + in Matroska files. A Matroska Reader MAY use embedded cover art to + display a representational still-image depiction of the multimedia + contents of the Matroska file. + + Only [JPEG] and PNG [RFC2083] image formats SHOULD be used for cover + art pictures. + + There can be two different covers for a movie/album: a portrait style + (e.g., a DVD case) and a landscape style (e.g., a wide banner ad). + + There can be two versions of the same cover: the normal cover and the + small cover. The dimension of the normal cover SHOULD be 600 pixels + on the smallest side (e.g., 960x600 for landscape, 600x800 for + portrait, or 600x600 for square). The dimension of the small cover + SHOULD be 120 pixels on the smallest side (e.g., 192x120 or 120x160). + + Versions of cover art can be differentiated by the filename, which is + stored in the FileName element. The default filename of the normal + cover in square or portrait mode is cover.(jpg|png). When stored, + the normal cover SHOULD be the first Attachments element in storage + order. The small cover SHOULD be prefixed with "small_", such as + small_cover.(jpg|png). The landscape variant SHOULD be suffixed with + "_land", such as cover_land.(jpg|png). The filenames are case- + sensitive. + + The following table provides examples of file names for cover art in + Attachments. + + +======================+===================+=================+ + | File Name | Image Orientation | Pixel Length of | + | | | Smallest Side | + +======================+===================+=================+ + | cover.jpg | Portrait or | 600 | + | | square | | + +----------------------+-------------------+-----------------+ + | small_cover.png | Portrait or | 120 | + | | square | | + +----------------------+-------------------+-----------------+ + | cover_land.png | Landscape | 600 | + +----------------------+-------------------+-----------------+ + | small_cover_land.jpg | Landscape | 120 | + +----------------------+-------------------+-----------------+ + + Table 52: Cover Art Filenames + +21.2. Font Files + + Font files MAY be added to a Matroska file as Attachments so that the + font file may be used to display an associated subtitle track. This + allows the presentation of a Matroska file to be consistent in + various environments where the needed fonts might not be available on + the local system. + + Depending on the font format in question, each font file can contain + multiple font variants. Each font variant has a name that will be + referred to as Font Name from now on. This Font Name can be + different from the Attachment's FileName, even when disregarding the + extension. In order to select a font for display, a Matroska Player + SHOULD consider both the Font Name and the base name of the + Attachment's FileName, preferring the former when there are multiple + matches. + + Subtitle codecs, such as SubStation Alpha (SSA) and Advanced + SubStation Alpha (ASS), usually refer to a font by its Font Name, not + by its filename. If none of the Attachments are a match for the Font + Name, the Matroska Player SHOULD attempt to find a system font whose + Font Name matches the one used in the subtitle track. + + Since loading fonts temporarily can take a while, a Matroska Player + usually loads or installs all the fonts found in attachments so they + are ready to be used during playback. Failure to use the font + attachment might result in incorrect rendering of the subtitles. + + If a selected subtitle track has some AttachmentLink elements, the + player MAY restrict its font rendering to use only these fonts. + + A Matroska Player SHOULD handle the official font media types from + [RFC8081] when the system can handle the type: + + * font/sfnt: Generic SFNT Font Type + + * font/ttf: TrueType Font (TTF) Font Type + + * font/otf: OpenType Layout (OTF) Font Type + + * font/collection: Collection Font Type + + * font/woff: WOFF 1.0 + + * font/woff2: WOFF 2.0 + + Fonts in Matroska existed long before [RFC8081]. A few unofficial + media types for fonts were used in existing files. Therefore, it is + RECOMMENDED for a Matroska Player to support the following legacy + media types for font attachments: + + * application/x-truetype-font: TrueType fonts, equivalent to font/ + ttf and sometimes font/otf + + * application/x-font-ttf: TrueType fonts, equivalent to font/ttf + + * application/vnd.ms-opentype: OpenType Layout fonts, equivalent to + font/otf + + * application/font-sfnt: Generic SFNT Font Type, equivalent to font/ + sfnt + + * application/font-woff: WOFF 1.0, equivalent to font/woff + + There may also be some font attachments with the application/octet- + stream media type. In that case, the Matroska Player MAY try to + guess the font type by checking the file extension of the + AttachedFile\FileName string. Common file extensions for fonts are: + + * .ttf for TrueType fonts, equivalent to font/ttf + + * .otf for OpenType Layout fonts, equivalent to font/otf + + * .ttc for Collection fonts, equivalent to font/collection + + The file extension check MUST be case-insensitive. + + Matroska Writers SHOULD use a valid font media type from [RFC8081] in + the AttachedFile\FileMediaType of the font attachment. They MAY use + the media types found in older files when compatibility with older + players is necessary. + +22. Cues + + The Cues element provides an index of certain Cluster elements to + allow for optimized seeking to absolute timestamps within the + Segment. The Cues element contains one or many CuePoint elements, + each of which MUST reference an absolute timestamp (via the CueTime + element), a Track (via the CueTrack element), and a Segment Position + (via the CueClusterPosition element). Additional non-mandated + elements are part of the CuePoint element, such as CueDuration, + CueRelativePosition, CueCodecState, and others that provide any + Matroska Reader with additional information to use in the + optimization of seeking performance. + +22.1. Recommendations + + The following recommendations are provided to optimize Matroska + performance. + + * Unless Matroska is used as a live stream, it SHOULD contain a Cues + element. + + * For each video track, each keyframe SHOULD be referenced by a + CuePoint element. + + * It is RECOMMENDED to not reference non-keyframes of video tracks + in Cues unless it references a Cluster element that contains a + CodecState element but no keyframes. + + * For each subtitle track present, each subtitle frame SHOULD be + referenced by a CuePoint element with a CueDuration element. + + * References to audio tracks MAY be skipped in CuePoint elements if + a video track is present. When included, the CuePoint elements + SHOULD reference audio keyframes once every 500 milliseconds at + most. + + * If the referenced frame is not stored within the first SimpleBlock + or first BlockGroup within its Cluster element, then the + CueRelativePosition element SHOULD be written to reference where + in the Cluster the reference frame is stored. + + * If a CuePoint element references a Cluster element that includes a + CodecState element, then that CuePoint element MUST use a + CueCodecState element. + + * CuePoint elements SHOULD be numerically sorted in storage order by + the value of the CueTime element. + +23. Matroska Streaming + + In Matroska, there are two kinds of streaming: file access and + livestreaming. + +23.1. File Access + + File access can simply be reading a file located on your computer, + but it also includes accessing a file from an HTTP (web) server or + Common Internet File System (CIFS) (Windows share) server. These + protocols are usually safe from reading errors, and seeking in the + stream is possible. However, when a file is stored far away or on a + slow server, seeking can be an expensive operation and should be + avoided. When followed, the guidelines in Section 25 help reduce the + number of seeking operations for regular playback and also have the + playback start quickly without needing to read lot of data first + (like a Cues element, Attachments element, or SeekHead element). + + Matroska, having a small overhead, is well suited for storing music/ + videos on file servers without a big impact on the bandwidth used. + Matroska does not require the index to be loaded before playing, + which allows playback to start very quickly. The index can be loaded + only when seeking is requested the first time. + +23.2. Livestreaming + + Livestreaming is the equivalent of television broadcasting on the + Internet. There are two families of servers for livestreaming: RTP / + Real-Time Streaming Protocol (RTSP) and HTTP. Matroska is not meant + to be used over RTP. RTP already has timing and channel mechanisms + that would be wasted if doubled in Matroska. Additionally, having + the same information at the RTP and Matroska level would be a source + of confusion if they do not match. Livestreaming of Matroska over + file-like protocols like HTTP, QUIC, etc., is possible. + + A live Matroska stream is different from a file because it usually + has no known end (only ending when the client disconnects). For + this, all bits of the "size" portion of the Segment element MUST be + set to 1. Another option is to concatenate Segment elements with + known sizes, one after the other. This solution allows a change of + codec/resolution between each segment. For example, this allows for + a switch between 4:3 and 16:9 in a television program. + + When Segment elements are continuous, certain elements (like + SeekHead, Cues, Chapters, and Attachments) MUST NOT be used. + + It is possible for a Matroska Player to detect that a stream is not + seekable. If the stream has neither a SeekHead list nor a Cues list + at the beginning of the stream, it SHOULD be considered non-seekable. + Even though it is possible to seek forward in the stream, it is NOT + RECOMMENDED. + + In the context of live radio or web TV, it is possible to "tag" the + content while it is playing. The Tags element can be placed between + Clusters each time it is necessary. In that case, the new Tags + element MUST reset the previously encountered Tags elements and use + the new values instead. + +24. Tags + +24.1. Tags Precedence + + Tags allow tagging all kinds of Matroska parts with very detailed + metadata in multiple languages. + + Some Matroska elements also contain their own string value, like the + track Name element (Section 5.1.4.1.18) or the ChapString element + (Section 5.1.7.1.4.10). + + The following Matroska elements can also be defined with tags: + + * The track Name element (Section 5.1.4.1.18) corresponds to a tag + with the TagTrackUID (Section 5.1.8.1.1.3) set to the given track, + a TagName of TITLE (Section 5.1.8.1.2.1), and a TagLanguage + (Section 5.1.8.1.2.2) or TagLanguageBCP47 (Section 5.1.8.1.2.3) of + "und". + + * The ChapString element (Section 5.1.7.1.4.10) corresponds to a tag + with the TagChapterUID (Section 5.1.8.1.1.5) set to the same + chapter UID, a TagName of TITLE (Section 5.1.8.1.2.1), and a + TagLanguage (Section 5.1.8.1.2.2) or TagLanguageBCP47 + (Section 5.1.8.1.2.3) matching the ChapLanguage + (Section 5.1.7.1.4.11) or ChapLanguageBCP47 + (Section 5.1.7.1.4.12), respectively. + + * The FileDescription element (Section 5.1.6.1.1) of an attachment + corresponds to a tag with the TagAttachmentUID + (Section 5.1.8.1.1.6) set to the given attachment, a TagName of + TITLE (Section 5.1.8.1.2.1), and a TagLanguage + (Section 5.1.8.1.2.2) or TagLanguageBCP47 (Section 5.1.8.1.2.3) of + "und". + + When both values exist in the file, the value found in Tags takes + precedence over the value found in the original location of the + element. For example, if you have a TrackEntry\Name element and a + tag value TITLE for that track in a Matroska Segment, the tag value + string SHOULD be used instead of the TrackEntry\Name string to + identify the track. + + As the Tag element is optional, a lot of Matroska Readers do not + handle it and will not use the tags value when it's found. Thus, for + maximum compatibility, it's usually better to put the strings in the + TrackEntry, ChapterAtom, and Attachments elements and keep the tags + matching these values if tags are also used. + +24.2. Tag Levels + + Tag elements allow tagging information on multiple levels, with each + level having a TargetTypeValue (Section 5.1.8.1.1.1). An element for + a given TargetTypeValue also applies to the lower levels denoted by + smaller TargetTypeValue values. If an upper value doesn't apply to a + level but the actual value to use is not known, an empty TagString + (Section 5.1.8.1.2.5) or an empty TagBinary (Section 5.1.8.1.2.6) + MUST be used as the tag value for this level. + + See [MatroskaTags] for more details on common tag names, types, and + descriptions. + +25. Implementation Recommendations + +25.1. Cluster + + It is RECOMMENDED that each individual Cluster element contain no + more than five seconds or five megabytes of content. + +25.2. SeekHead + + It is RECOMMENDED that the first SeekHead element be followed by a + Void element to allow for the SeekHead element to be expanded to + cover new Top-Level Elements that could be added to the Matroska + file, such as Tags, Chapters, and Attachments elements. + + The size of this Void element should be adjusted depending on the + Tags, Chapters, and Attachments elements in the Matroska file. + +25.3. Optimum Layouts + + While there can be Top-Level Elements in any order, some orderings of + elements are better than others. The following subsections detail + optimum layouts for different use cases. + +25.3.1. Optimum Layout for a Muxer + + This is the basic layout muxers should be using for an efficient + playback experience: + + * SeekHead + * Info + * Tracks + * Chapters + * Attachments + * Tags + * Clusters + * Cues + +25.3.2. Optimum Layout after Editing Tags + + When tags from the previous layout need to be extended, they are + moved to the end with the extra information. The location where the + old tags were located is voided. + + * SeekHead + * Info + * Tracks + * Chapters + * Attachments + * Void + * Clusters + * Cues + * Tags + +25.3.3. Optimum Layout with Cues at the Front + + Cues are usually a big chunk of data referencing a lot of locations + in the file. Players that want to seek in the file need to seek to + the end of the file to access these locations. It is often better if + they are placed early in the file. On the other hand, that means + players that don't intend to seek will have to read/skip these data + no matter what. + + Because the Cues reference locations further in the file, it's often + complicated to allocate the proper space for that element before all + the locations are known. Therefore, this layout is rarely used: + + * SeekHead + * Info + * Tracks + * Chapters + * Attachments + * Tags + * Cues + * Clusters + +25.3.4. Optimum Layout for Livestreaming + + In livestreaming (Section 23.2), only a few elements make sense. For + example, SeekHead and Cues are useless. All elements other than the + Clusters MUST be placed before the Clusters. + + * Info + * Tracks + * Attachments (rare) + * Tags + * Clusters + +26. Security Considerations + + Matroska inherits security considerations from EBML [RFC8794]. + + Attacks on a Matroska Reader could include: + + * Storage of an arbitrary and potentially executable data within an + Attachments element. Matroska Readers that extract or use data + from Matroska Attachments SHOULD check that the data adheres to + expectations or not use the attachment. + + * A Matroska Attachment with an inaccurate media type. + + * Damage to the Encryption and Compression fields (Section 14) that + would result in bogus binary data interpreted by the decoder. + + * Chapter Codecs running unwanted commands on the host system. + + The same error handling done for EBML applies to Matroska files. + Particular error handling is not covered in this specification, as + this is depends on the goal of the Matroska Readers. Matroska + Readers decide how to handle the errors whether or not they are + recoverable in their code. For example, if the checksum of the + \Segment\Tracks is invalid, some could decide to try to read the data + anyway, some will just reject the file, and most will not even check + it. + + Matroska Reader implementations need to be robust against malicious + payloads. Those related to denial of service are outlined in + Section 2.1 of [RFC4732]. + + Although rarer, the same may apply to a Matroska Writer. Malicious + stream data must not cause the Matroska Writer to misbehave, as this + might allow an attacker access to transcoding gateways. + + As an audio/video container format, a Matroska file or stream will + potentially encapsulate numerous byte streams created with a variety + of codecs. Implementers will need to consider the security + considerations of these encapsulated formats. + +27. IANA Considerations + +27.1. Matroska Element IDs Registry + + IANA has created a new registry called the "Matroska Element IDs" + registry. + + To register a new Element ID in this registry, one needs an Element + ID, an Element Name, a Change Controller, and an optional Reference + to a document describing the Element ID. + + Element IDs are encoded using the VINT mechanism described in + Section 4 of [RFC8794] and can be between one and five octets long. + Five-octet Element IDs are possible only if declared in the EBML + Header. + + Element IDs are described in Section 5 of [RFC8794], with the changes + in [Err7189] and [Err7191]. + + One-octet Matroska Element IDs (range 0x80-0xFE) are to be allocated + according to the "RFC Required" policy [RFC8126]. + + Two-octet Matroska Element IDs (range 0x407F-0x7FFE) are to be + allocated according to the "Specification Required" policy [RFC8126]. + + Two-octet Matroska Element IDs between 0x0100 and 0x407E are not + valid for use as an Element ID. + + Three-octet (range 0x203FFF-0x3FFFFE) and four-octet Matroska Element + IDs (range 0x101FFFFF-0x1FFFFFFE) are to be allocated according to + the "First Come First Served" policy [RFC8126]. + + Three-octet Matroska Element IDs between 0x010000 and 0x203FFE are + not valid for use as an Element ID. + + Four-octet Matroska Element IDs between 0x01000000 and 0x101FFFFE are + not valid for use as an Element ID. + + The allowed values in the "Matroska Element IDs" registry are similar + to the ones found in the "EBML Element IDs" registry defined in + Section 17.1 of [RFC8794]. + + EBML Element IDs defined for the EBML Header -- as defined in + Section 17.1 of [RFC8794] -- MUST NOT be used as Matroska Element + IDs. + + Given the scarcity of one-octet Element IDs, they should only be + created to save space for elements found many times in a file (for + example, BlockGroup or Chapters). The four-octet Element IDs are + mostly for synchronization of large elements. They should only be + used for such high-level elements. Elements that are not expected to + be used often should use three-octet Element IDs. + + Elements found in Appendix A have an assigned Matroska Element ID for + historical reasons. These elements are not in use and SHOULD NOT be + reused unless there are no other IDs available with the desired size. + Such IDs are marked as "Reclaimed" in the "Matroska Element IDs" + registry, as they could be used for other things in the future. + + Table 53 shows the initial contents of the "Matroska Element IDs" + registry. The Change Controller for the initial entries is the IETF. + + +=====================+=============================+==============+ + | Element ID| Element Name |Reference | + +=====================+=============================+==============+ + | 0x80| ChapterDisplay |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.9 | + +---------------------+-----------------------------+--------------+ + | 0x83| TrackType |RFC 9559, | + | | |Section | + | | |5.1.4.1.3 | + +---------------------+-----------------------------+--------------+ + | 0x85| ChapString |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.10 | + +---------------------+-----------------------------+--------------+ + | 0x86| CodecID |RFC 9559, | + | | |Section | + | | |5.1.4.1.21 | + +---------------------+-----------------------------+--------------+ + | 0x88| FlagDefault |RFC 9559, | + | | |Section | + | | |5.1.4.1.5 | + +---------------------+-----------------------------+--------------+ + | 0x8E| Slices |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.5) | + +---------------------+-----------------------------+--------------+ + | 0x91| ChapterTimeStart |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.3 | + +---------------------+-----------------------------+--------------+ + | 0x92| ChapterTimeEnd |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.4 | + +---------------------+-----------------------------+--------------+ + | 0x96| CueRefTime |RFC 9559, | + | | |Section | + | | |5.1.5.1.2.8 | + +---------------------+-----------------------------+--------------+ + | 0x97| CueRefCluster |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.37)| + +---------------------+-----------------------------+--------------+ + | 0x98| ChapterFlagHidden |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.5 | + +---------------------+-----------------------------+--------------+ + | 0x9A| FlagInterlaced |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.1 | + +---------------------+-----------------------------+--------------+ + | 0x9B| BlockDuration |RFC 9559, | + | | |Section | + | | |5.1.3.5.3 | + +---------------------+-----------------------------+--------------+ + | 0x9C| FlagLacing |RFC 9559, | + | | |Section | + | | |5.1.4.1.12 | + +---------------------+-----------------------------+--------------+ + | 0x9D| FieldOrder |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.2 | + +---------------------+-----------------------------+--------------+ + | 0x9F| Channels |RFC 9559, | + | | |Section | + | | |5.1.4.1.29.3 | + +---------------------+-----------------------------+--------------+ + | 0xA0| BlockGroup |RFC 9559, | + | | |Section | + | | |5.1.3.5 | + +---------------------+-----------------------------+--------------+ + | 0xA1| Block |RFC 9559, | + | | |Section | + | | |5.1.3.5.1 | + +---------------------+-----------------------------+--------------+ + | 0xA2| BlockVirtual |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.3) | + +---------------------+-----------------------------+--------------+ + | 0xA3| SimpleBlock |RFC 9559, | + | | |Section | + | | |5.1.3.4 | + +---------------------+-----------------------------+--------------+ + | 0xA4| CodecState |RFC 9559, | + | | |Section | + | | |5.1.3.5.6 | + +---------------------+-----------------------------+--------------+ + | 0xA5| BlockAdditional |RFC 9559, | + | | |Section | + | | |5.1.3.5.2.2 | + +---------------------+-----------------------------+--------------+ + | 0xA6| BlockMore |RFC 9559, | + | | |Section | + | | |5.1.3.5.2.1 | + +---------------------+-----------------------------+--------------+ + | 0xA7| Position |RFC 9559, | + | | |Section | + | | |5.1.3.2 | + +---------------------+-----------------------------+--------------+ + | 0xAA| CodecDecodeAll |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.22)| + +---------------------+-----------------------------+--------------+ + | 0xAB| PrevSize |RFC 9559, | + | | |Section | + | | |5.1.3.3 | + +---------------------+-----------------------------+--------------+ + | 0xAE| TrackEntry |RFC 9559, | + | | |Section | + | | |5.1.4.1 | + +---------------------+-----------------------------+--------------+ + | 0xAF| EncryptedBlock |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.15)| + +---------------------+-----------------------------+--------------+ + | 0xB0| PixelWidth |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.6 | + +---------------------+-----------------------------+--------------+ + | 0xB2| CueDuration |RFC 9559, | + | | |Section | + | | |5.1.5.1.2.4 | + +---------------------+-----------------------------+--------------+ + | 0xB3| CueTime |RFC 9559, | + | | |Section | + | | |5.1.5.1.1 | + +---------------------+-----------------------------+--------------+ + | 0xB5| SamplingFrequency |RFC 9559, | + | | |Section | + | | |5.1.4.1.29.1 | + +---------------------+-----------------------------+--------------+ + | 0xB6| ChapterAtom |RFC 9559, | + | | |Section | + | | |5.1.7.1.4 | + +---------------------+-----------------------------+--------------+ + | 0xB7| CueTrackPositions |RFC 9559, | + | | |Section | + | | |5.1.5.1.2 | + +---------------------+-----------------------------+--------------+ + | 0xB9| FlagEnabled |RFC 9559, | + | | |Section | + | | |5.1.4.1.4 | + +---------------------+-----------------------------+--------------+ + | 0xBA| PixelHeight |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.7 | + +---------------------+-----------------------------+--------------+ + | 0xBB| CuePoint |RFC 9559, | + | | |Section | + | | |5.1.5.1 | + +---------------------+-----------------------------+--------------+ + | 0xC0| TrickTrackUID |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.28)| + +---------------------+-----------------------------+--------------+ + | 0xC1| TrickTrackSegmentUID |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.29)| + +---------------------+-----------------------------+--------------+ + | 0xC4| TrickMasterTrackSegmentUID |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.32)| + +---------------------+-----------------------------+--------------+ + | 0xC6| TrickTrackFlag |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.30)| + +---------------------+-----------------------------+--------------+ + | 0xC7| TrickMasterTrackUID |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.31)| + +---------------------+-----------------------------+--------------+ + | 0xC8| ReferenceFrame |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.12)| + +---------------------+-----------------------------+--------------+ + | 0xC9| ReferenceOffset |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.13)| + +---------------------+-----------------------------+--------------+ + | 0xCA| ReferenceTimestamp |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.14)| + +---------------------+-----------------------------+--------------+ + | 0xCB| BlockAdditionID |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.9) | + +---------------------+-----------------------------+--------------+ + | 0xCC| LaceNumber |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.7) | + +---------------------+-----------------------------+--------------+ + | 0xCD| FrameNumber |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.8) | + +---------------------+-----------------------------+--------------+ + | 0xCE| Delay |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.10)| + +---------------------+-----------------------------+--------------+ + | 0xCF| SliceDuration |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.11)| + +---------------------+-----------------------------+--------------+ + | 0xD7| TrackNumber |RFC 9559, | + | | |Section | + | | |5.1.4.1.1 | + +---------------------+-----------------------------+--------------+ + | 0xDB| CueReference |RFC 9559, | + | | |Section | + | | |5.1.5.1.2.7 | + +---------------------+-----------------------------+--------------+ + | 0xE0| Video |RFC 9559, | + | | |Section | + | | |5.1.4.1.28 | + +---------------------+-----------------------------+--------------+ + | 0xE1| Audio |RFC 9559, | + | | |Section | + | | |5.1.4.1.29 | + +---------------------+-----------------------------+--------------+ + | 0xE2| TrackOperation |RFC 9559, | + | | |Section | + | | |5.1.4.1.30 | + +---------------------+-----------------------------+--------------+ + | 0xE3| TrackCombinePlanes |RFC 9559, | + | | |Section | + | | |5.1.4.1.30.1 | + +---------------------+-----------------------------+--------------+ + | 0xE4| TrackPlane |RFC 9559, | + | | |Section | + | | |5.1.4.1.30.2 | + +---------------------+-----------------------------+--------------+ + | 0xE5| TrackPlaneUID |RFC 9559, | + | | |Section | + | | |5.1.4.1.30.3 | + +---------------------+-----------------------------+--------------+ + | 0xE6| TrackPlaneType |RFC 9559, | + | | |Section | + | | |5.1.4.1.30.4 | + +---------------------+-----------------------------+--------------+ + | 0xE7| Timestamp |RFC 9559, | + | | |Section | + | | |5.1.3.1 | + +---------------------+-----------------------------+--------------+ + | 0xE8| TimeSlice |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.6) | + +---------------------+-----------------------------+--------------+ + | 0xE9| TrackJoinBlocks |RFC 9559, | + | | |Section | + | | |5.1.4.1.30.5 | + +---------------------+-----------------------------+--------------+ + | 0xEA| CueCodecState |RFC 9559, | + | | |Section | + | | |5.1.5.1.2.6 | + +---------------------+-----------------------------+--------------+ + | 0xEB| CueRefCodecState |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.39)| + +---------------------+-----------------------------+--------------+ + | 0xED| TrackJoinUID |RFC 9559, | + | | |Section | + | | |5.1.4.1.30.6 | + +---------------------+-----------------------------+--------------+ + | 0xEE| BlockAddID |RFC 9559, | + | | |Section | + | | |5.1.3.5.2.3 | + +---------------------+-----------------------------+--------------+ + | 0xF0| CueRelativePosition |RFC 9559, | + | | |Section | + | | |5.1.5.1.2.3 | + +---------------------+-----------------------------+--------------+ + | 0xF1| CueClusterPosition |RFC 9559, | + | | |Section | + | | |5.1.5.1.2.2 | + +---------------------+-----------------------------+--------------+ + | 0xF7| CueTrack |RFC 9559, | + | | |Section | + | | |5.1.5.1.2.1 | + +---------------------+-----------------------------+--------------+ + | 0xFA| ReferencePriority |RFC 9559, | + | | |Section | + | | |5.1.3.5.4 | + +---------------------+-----------------------------+--------------+ + | 0xFB| ReferenceBlock |RFC 9559, | + | | |Section | + | | |5.1.3.5.5 | + +---------------------+-----------------------------+--------------+ + | 0xFD| ReferenceVirtual |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.4) | + +---------------------+-----------------------------+--------------+ + | 0xFF| Reserved |RFC 9559 | + +---------------------+-----------------------------+--------------+ + | 0x0100-0x407E| Not valid for use as an |RFC 9559, | + | | Element ID |Section 27.1 | + +---------------------+-----------------------------+--------------+ + | 0x41A4| BlockAddIDName |RFC 9559, | + | | |Section | + | | |5.1.4.1.17.2 | + +---------------------+-----------------------------+--------------+ + | 0x41E4| BlockAdditionMapping |RFC 9559, | + | | |Section | + | | |5.1.4.1.17 | + +---------------------+-----------------------------+--------------+ + | 0x41E7| BlockAddIDType |RFC 9559, | + | | |Section | + | | |5.1.4.1.17.3 | + +---------------------+-----------------------------+--------------+ + | 0x41ED| BlockAddIDExtraData |RFC 9559, | + | | |Section | + | | |5.1.4.1.17.4 | + +---------------------+-----------------------------+--------------+ + | 0x41F0| BlockAddIDValue |RFC 9559, | + | | |Section | + | | |5.1.4.1.17.1 | + +---------------------+-----------------------------+--------------+ + | 0x4254| ContentCompAlgo |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.6 | + +---------------------+-----------------------------+--------------+ + | 0x4255| ContentCompSettings |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.7 | + +---------------------+-----------------------------+--------------+ + | 0x437C| ChapLanguage |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.11 | + +---------------------+-----------------------------+--------------+ + | 0x437D| ChapLanguageBCP47 |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.12 | + +---------------------+-----------------------------+--------------+ + | 0x437E| ChapCountry |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.13 | + +---------------------+-----------------------------+--------------+ + | 0x4444| SegmentFamily |RFC 9559, | + | | |Section | + | | |5.1.2.7 | + +---------------------+-----------------------------+--------------+ + | 0x4461| DateUTC |RFC 9559, | + | | |Section | + | | |5.1.2.11 | + +---------------------+-----------------------------+--------------+ + | 0x447A| TagLanguage |RFC 9559, | + | | |Section | + | | |5.1.8.1.2.2 | + +---------------------+-----------------------------+--------------+ + | 0x447B| TagLanguageBCP47 |RFC 9559, | + | | |Section | + | | |5.1.8.1.2.3 | + +---------------------+-----------------------------+--------------+ + | 0x4484| TagDefault |RFC 9559, | + | | |Section | + | | |5.1.8.1.2.4 | + +---------------------+-----------------------------+--------------+ + | 0x4485| TagBinary |RFC 9559, | + | | |Section | + | | |5.1.8.1.2.6 | + +---------------------+-----------------------------+--------------+ + | 0x4487| TagString |RFC 9559, | + | | |Section | + | | |5.1.8.1.2.5 | + +---------------------+-----------------------------+--------------+ + | 0x4489| Duration |RFC 9559, | + | | |Section | + | | |5.1.2.10 | + +---------------------+-----------------------------+--------------+ + | 0x44B4| TagDefaultBogus |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.43)| + +---------------------+-----------------------------+--------------+ + | 0x450D| ChapProcessPrivate |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.16 | + +---------------------+-----------------------------+--------------+ + | 0x45A3| TagName |RFC 9559, | + | | |Section | + | | |5.1.8.1.2.1 | + +---------------------+-----------------------------+--------------+ + | 0x45B9| EditionEntry |RFC 9559, | + | | |Section | + | | |5.1.7.1 | + +---------------------+-----------------------------+--------------+ + | 0x45BC| EditionUID |RFC 9559, | + | | |Section | + | | |5.1.7.1.1 | + +---------------------+-----------------------------+--------------+ + | 0x45DB| EditionFlagDefault |RFC 9559, | + | | |Section | + | | |5.1.7.1.2 | + +---------------------+-----------------------------+--------------+ + | 0x45DD| EditionFlagOrdered |RFC 9559, | + | | |Section | + | | |5.1.7.1.3 | + +---------------------+-----------------------------+--------------+ + | 0x465C| FileData |RFC 9559, | + | | |Section | + | | |5.1.6.1.4 | + +---------------------+-----------------------------+--------------+ + | 0x4660| FileMediaType |RFC 9559, | + | | |Section | + | | |5.1.6.1.3 | + +---------------------+-----------------------------+--------------+ + | 0x4661| FileUsedStartTime |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.41)| + +---------------------+-----------------------------+--------------+ + | 0x4662| FileUsedEndTime |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.42)| + +---------------------+-----------------------------+--------------+ + | 0x466E| FileName |RFC 9559, | + | | |Section | + | | |5.1.6.1.2 | + +---------------------+-----------------------------+--------------+ + | 0x4675| FileReferral |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.40)| + +---------------------+-----------------------------+--------------+ + | 0x467E| FileDescription |RFC 9559, | + | | |Section | + | | |5.1.6.1.1 | + +---------------------+-----------------------------+--------------+ + | 0x46AE| FileUID |RFC 9559, | + | | |Section | + | | |5.1.6.1.5 | + +---------------------+-----------------------------+--------------+ + | 0x47E1| ContentEncAlgo |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.9 | + +---------------------+-----------------------------+--------------+ + | 0x47E2| ContentEncKeyID |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.10 | + +---------------------+-----------------------------+--------------+ + | 0x47E3| ContentSignature |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.33)| + +---------------------+-----------------------------+--------------+ + | 0x47E4| ContentSigKeyID |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.34)| + +---------------------+-----------------------------+--------------+ + | 0x47E5| ContentSigAlgo |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.35)| + +---------------------+-----------------------------+--------------+ + | 0x47E6| ContentSigHashAlgo |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.36)| + +---------------------+-----------------------------+--------------+ + | 0x47E7| ContentEncAESSettings |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.11 | + +---------------------+-----------------------------+--------------+ + | 0x47E8| AESSettingsCipherMode |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.12 | + +---------------------+-----------------------------+--------------+ + | 0x4D80| MuxingApp |RFC 9559, | + | | |Section | + | | |5.1.2.13 | + +---------------------+-----------------------------+--------------+ + | 0x4DBB| Seek |RFC 9559, | + | | |Section | + | | |5.1.1.1 | + +---------------------+-----------------------------+--------------+ + | 0x5031| ContentEncodingOrder |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.2 | + +---------------------+-----------------------------+--------------+ + | 0x5032| ContentEncodingScope |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.3 | + +---------------------+-----------------------------+--------------+ + | 0x5033| ContentEncodingType |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.4 | + +---------------------+-----------------------------+--------------+ + | 0x5034| ContentCompression |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.5 | + +---------------------+-----------------------------+--------------+ + | 0x5035| ContentEncryption |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.8 | + +---------------------+-----------------------------+--------------+ + | 0x535F| CueRefNumber |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.38)| + +---------------------+-----------------------------+--------------+ + | 0x536E| Name |RFC 9559, | + | | |Section | + | | |5.1.4.1.18 | + +---------------------+-----------------------------+--------------+ + | 0x5378| CueBlockNumber |RFC 9559, | + | | |Section | + | | |5.1.5.1.2.5 | + +---------------------+-----------------------------+--------------+ + | 0x537F| TrackOffset |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.18)| + +---------------------+-----------------------------+--------------+ + | 0x53AB| SeekID |RFC 9559, | + | | |Section | + | | |5.1.1.1.1 | + +---------------------+-----------------------------+--------------+ + | 0x53AC| SeekPosition |RFC 9559, | + | | |Section | + | | |5.1.1.1.2 | + +---------------------+-----------------------------+--------------+ + | 0x53B8| StereoMode |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.3 | + +---------------------+-----------------------------+--------------+ + | 0x53B9| OldStereoMode |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.5 | + +---------------------+-----------------------------+--------------+ + | 0x53C0| AlphaMode |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.4 | + +---------------------+-----------------------------+--------------+ + | 0x54AA| PixelCropBottom |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.8 | + +---------------------+-----------------------------+--------------+ + | 0x54B0| DisplayWidth |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.12 | + +---------------------+-----------------------------+--------------+ + | 0x54B2| DisplayUnit |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.14 | + +---------------------+-----------------------------+--------------+ + | 0x54B3| AspectRatioType |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.24)| + +---------------------+-----------------------------+--------------+ + | 0x54BA| DisplayHeight |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.13 | + +---------------------+-----------------------------+--------------+ + | 0x54BB| PixelCropTop |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.9 | + +---------------------+-----------------------------+--------------+ + | 0x54CC| PixelCropLeft |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.10 | + +---------------------+-----------------------------+--------------+ + | 0x54DD| PixelCropRight |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.11 | + +---------------------+-----------------------------+--------------+ + | 0x55AA| FlagForced |RFC 9559, | + | | |Section | + | | |5.1.4.1.6 | + +---------------------+-----------------------------+--------------+ + | 0x55AB| FlagHearingImpaired |RFC 9559, | + | | |Section | + | | |5.1.4.1.7 | + +---------------------+-----------------------------+--------------+ + | 0x55AC| FlagVisualImpaired |RFC 9559, | + | | |Section | + | | |5.1.4.1.8 | + +---------------------+-----------------------------+--------------+ + | 0x55AD| FlagTextDescriptions |RFC 9559, | + | | |Section | + | | |5.1.4.1.9 | + +---------------------+-----------------------------+--------------+ + | 0x55AE| FlagOriginal |RFC 9559, | + | | |Section | + | | |5.1.4.1.10 | + +---------------------+-----------------------------+--------------+ + | 0x55AF| FlagCommentary |RFC 9559, | + | | |Section | + | | |5.1.4.1.11 | + +---------------------+-----------------------------+--------------+ + | 0x55B0| Colour |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.16 | + +---------------------+-----------------------------+--------------+ + | 0x55B1| MatrixCoefficients |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.17 | + +---------------------+-----------------------------+--------------+ + | 0x55B2| BitsPerChannel |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.18 | + +---------------------+-----------------------------+--------------+ + | 0x55B3| ChromaSubsamplingHorz |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.19 | + +---------------------+-----------------------------+--------------+ + | 0x55B4| ChromaSubsamplingVert |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.20 | + +---------------------+-----------------------------+--------------+ + | 0x55B5| CbSubsamplingHorz |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.21 | + +---------------------+-----------------------------+--------------+ + | 0x55B6| CbSubsamplingVert |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.22 | + +---------------------+-----------------------------+--------------+ + | 0x55B7| ChromaSitingHorz |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.23 | + +---------------------+-----------------------------+--------------+ + | 0x55B8| ChromaSitingVert |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.24 | + +---------------------+-----------------------------+--------------+ + | 0x55B9| Range |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.25 | + +---------------------+-----------------------------+--------------+ + | 0x55BA| TransferCharacteristics |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.26 | + +---------------------+-----------------------------+--------------+ + | 0x55BB| Primaries |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.27 | + +---------------------+-----------------------------+--------------+ + | 0x55BC| MaxCLL |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.28 | + +---------------------+-----------------------------+--------------+ + | 0x55BD| MaxFALL |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.29 | + +---------------------+-----------------------------+--------------+ + | 0x55D0| MasteringMetadata |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.30 | + +---------------------+-----------------------------+--------------+ + | 0x55D1| PrimaryRChromaticityX |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.31 | + +---------------------+-----------------------------+--------------+ + | 0x55D2| PrimaryRChromaticityY |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.32 | + +---------------------+-----------------------------+--------------+ + | 0x55D3| PrimaryGChromaticityX |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.33 | + +---------------------+-----------------------------+--------------+ + | 0x55D4| PrimaryGChromaticityY |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.34 | + +---------------------+-----------------------------+--------------+ + | 0x55D5| PrimaryBChromaticityX |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.35 | + +---------------------+-----------------------------+--------------+ + | 0x55D6| PrimaryBChromaticityY |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.36 | + +---------------------+-----------------------------+--------------+ + | 0x55D7| WhitePointChromaticityX |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.37 | + +---------------------+-----------------------------+--------------+ + | 0x55D8| WhitePointChromaticityY |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.38 | + +---------------------+-----------------------------+--------------+ + | 0x55D9| LuminanceMax |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.39 | + +---------------------+-----------------------------+--------------+ + | 0x55DA| LuminanceMin |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.40 | + +---------------------+-----------------------------+--------------+ + | 0x55EE| MaxBlockAdditionID |RFC 9559, | + | | |Section | + | | |5.1.4.1.16 | + +---------------------+-----------------------------+--------------+ + | 0x5654| ChapterStringUID |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.2 | + +---------------------+-----------------------------+--------------+ + | 0x56AA| CodecDelay |RFC 9559, | + | | |Section | + | | |5.1.4.1.25 | + +---------------------+-----------------------------+--------------+ + | 0x56BB| SeekPreRoll |RFC 9559, | + | | |Section | + | | |5.1.4.1.26 | + +---------------------+-----------------------------+--------------+ + | 0x5741| WritingApp |RFC 9559, | + | | |Section | + | | |5.1.2.14 | + +---------------------+-----------------------------+--------------+ + | 0x5854| SilentTracks |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.1) | + +---------------------+-----------------------------+--------------+ + | 0x58D7| SilentTrackNumber |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.2) | + +---------------------+-----------------------------+--------------+ + | 0x61A7| AttachedFile |RFC 9559, | + | | |Section | + | | |5.1.6.1 | + +---------------------+-----------------------------+--------------+ + | 0x6240| ContentEncoding |RFC 9559, | + | | |Section | + | | |5.1.4.1.31.1 | + +---------------------+-----------------------------+--------------+ + | 0x6264| BitDepth |RFC 9559, | + | | |Section | + | | |5.1.4.1.29.4 | + +---------------------+-----------------------------+--------------+ + | 0x63A2| CodecPrivate |RFC 9559, | + | | |Section | + | | |5.1.4.1.22 | + +---------------------+-----------------------------+--------------+ + | 0x63C0| Targets |RFC 9559, | + | | |Section | + | | |5.1.8.1.1 | + +---------------------+-----------------------------+--------------+ + | 0x63C3| ChapterPhysicalEquiv |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.8 | + +---------------------+-----------------------------+--------------+ + | 0x63C4| TagChapterUID |RFC 9559, | + | | |Section | + | | |5.1.8.1.1.5 | + +---------------------+-----------------------------+--------------+ + | 0x63C5| TagTrackUID |RFC 9559, | + | | |Section | + | | |5.1.8.1.1.3 | + +---------------------+-----------------------------+--------------+ + | 0x63C6| TagAttachmentUID |RFC 9559, | + | | |Section | + | | |5.1.8.1.1.6 | + +---------------------+-----------------------------+--------------+ + | 0x63C9| TagEditionUID |RFC 9559, | + | | |Section | + | | |5.1.8.1.1.4 | + +---------------------+-----------------------------+--------------+ + | 0x63CA| TargetType |RFC 9559, | + | | |Section | + | | |5.1.8.1.1.2 | + +---------------------+-----------------------------+--------------+ + | 0x6624| TrackTranslate |RFC 9559, | + | | |Section | + | | |5.1.4.1.27 | + +---------------------+-----------------------------+--------------+ + | 0x66A5| TrackTranslateTrackID |RFC 9559, | + | | |Section | + | | |5.1.4.1.27.1 | + +---------------------+-----------------------------+--------------+ + | 0x66BF| TrackTranslateCodec |RFC 9559, | + | | |Section | + | | |5.1.4.1.27.2 | + +---------------------+-----------------------------+--------------+ + | 0x66FC| TrackTranslateEditionUID |RFC 9559, | + | | |Section | + | | |5.1.4.1.27.3 | + +---------------------+-----------------------------+--------------+ + | 0x67C8| SimpleTag |RFC 9559, | + | | |Section | + | | |5.1.8.1.2 | + +---------------------+-----------------------------+--------------+ + | 0x68CA| TargetTypeValue |RFC 9559, | + | | |Section | + | | |5.1.8.1.1.1 | + +---------------------+-----------------------------+--------------+ + | 0x6911| ChapProcessCommand |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.17 | + +---------------------+-----------------------------+--------------+ + | 0x6922| ChapProcessTime |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.18 | + +---------------------+-----------------------------+--------------+ + | 0x6924| ChapterTranslate |RFC 9559, | + | | |Section | + | | |5.1.2.8 | + +---------------------+-----------------------------+--------------+ + | 0x6933| ChapProcessData |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.19 | + +---------------------+-----------------------------+--------------+ + | 0x6944| ChapProcess |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.14 | + +---------------------+-----------------------------+--------------+ + | 0x6955| ChapProcessCodecID |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.15 | + +---------------------+-----------------------------+--------------+ + | 0x69A5| ChapterTranslateID |RFC 9559, | + | | |Section | + | | |5.1.2.8.1 | + +---------------------+-----------------------------+--------------+ + | 0x69BF| ChapterTranslateCodec |RFC 9559, | + | | |Section | + | | |5.1.2.8.2 | + +---------------------+-----------------------------+--------------+ + | 0x69FC| ChapterTranslateEditionUID |RFC 9559, | + | | |Section | + | | |5.1.2.8.3 | + +---------------------+-----------------------------+--------------+ + | 0x6D80| ContentEncodings |RFC 9559, | + | | |Section | + | | |5.1.4.1.31 | + +---------------------+-----------------------------+--------------+ + | 0x6DE7| MinCache |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.16)| + +---------------------+-----------------------------+--------------+ + | 0x6DF8| MaxCache |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.17)| + +---------------------+-----------------------------+--------------+ + | 0x6E67| ChapterSegmentUUID |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.6 | + +---------------------+-----------------------------+--------------+ + | 0x6EBC| ChapterSegmentEditionUID |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.7 | + +---------------------+-----------------------------+--------------+ + | 0x6FAB| TrackOverlay |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.23)| + +---------------------+-----------------------------+--------------+ + | 0x7373| Tag |RFC 9559, | + | | |Section | + | | |5.1.8.1 | + +---------------------+-----------------------------+--------------+ + | 0x7384| SegmentFilename |RFC 9559, | + | | |Section | + | | |5.1.2.2 | + +---------------------+-----------------------------+--------------+ + | 0x73A4| SegmentUUID |RFC 9559, | + | | |Section | + | | |5.1.2.1 | + +---------------------+-----------------------------+--------------+ + | 0x73C4| ChapterUID |RFC 9559, | + | | |Section | + | | |5.1.7.1.4.1 | + +---------------------+-----------------------------+--------------+ + | 0x73C5| TrackUID |RFC 9559, | + | | |Section | + | | |5.1.4.1.2 | + +---------------------+-----------------------------+--------------+ + | 0x7446| AttachmentLink |RFC 9559, | + | | |Section | + | | |5.1.4.1.24 | + +---------------------+-----------------------------+--------------+ + | 0x75A1| BlockAdditions |RFC 9559, | + | | |Section | + | | |5.1.3.5.2 | + +---------------------+-----------------------------+--------------+ + | 0x75A2| DiscardPadding |RFC 9559, | + | | |Section | + | | |5.1.3.5.7 | + +---------------------+-----------------------------+--------------+ + | 0x7670| Projection |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.41 | + +---------------------+-----------------------------+--------------+ + | 0x7671| ProjectionType |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.42 | + +---------------------+-----------------------------+--------------+ + | 0x7672| ProjectionPrivate |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.43 | + +---------------------+-----------------------------+--------------+ + | 0x7673| ProjectionPoseYaw |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.44 | + +---------------------+-----------------------------+--------------+ + | 0x7674| ProjectionPosePitch |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.45 | + +---------------------+-----------------------------+--------------+ + | 0x7675| ProjectionPoseRoll |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.46 | + +---------------------+-----------------------------+--------------+ + | 0x78B5| OutputSamplingFrequency |RFC 9559, | + | | |Section | + | | |5.1.4.1.29.2 | + +---------------------+-----------------------------+--------------+ + | 0x7BA9| Title |RFC 9559, | + | | |Section | + | | |5.1.2.12 | + +---------------------+-----------------------------+--------------+ + | 0x7D7B| ChannelPositions |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.27)| + +---------------------+-----------------------------+--------------+ + | 0x7FFF| Reserved |RFC 9559 | + +---------------------+-----------------------------+--------------+ + | 0x010000-0x203FFE| Not valid for use as an |RFC 9559, | + | | Element ID |Section 27.1 | + +---------------------+-----------------------------+--------------+ + | 0x22B59C| Language |RFC 9559, | + | | |Section | + | | |5.1.4.1.19 | + +---------------------+-----------------------------+--------------+ + | 0x22B59D| LanguageBCP47 |RFC 9559, | + | | |Section | + | | |5.1.4.1.20 | + +---------------------+-----------------------------+--------------+ + | 0x23314F| TrackTimestampScale |RFC 9559, | + | | |Section | + | | |5.1.4.1.15 | + +---------------------+-----------------------------+--------------+ + | 0x234E7A| DefaultDecodedFieldDuration |RFC 9559, | + | | |Section | + | | |5.1.4.1.14 | + +---------------------+-----------------------------+--------------+ + | 0x2383E3| FrameRate |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.26)| + +---------------------+-----------------------------+--------------+ + | 0x23E383| DefaultDuration |RFC 9559, | + | | |Section | + | | |5.1.4.1.13 | + +---------------------+-----------------------------+--------------+ + | 0x258688| CodecName |RFC 9559, | + | | |Section | + | | |5.1.4.1.23 | + +---------------------+-----------------------------+--------------+ + | 0x26B240| CodecDownloadURL |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.21)| + +---------------------+-----------------------------+--------------+ + | 0x2AD7B1| TimestampScale |RFC 9559, | + | | |Section | + | | |5.1.2.9 | + +---------------------+-----------------------------+--------------+ + | 0x2EB524| UncompressedFourCC |RFC 9559, | + | | |Section | + | | |5.1.4.1.28.15 | + +---------------------+-----------------------------+--------------+ + | 0x2FB523| GammaValue |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.25)| + +---------------------+-----------------------------+--------------+ + | 0x3A9697| CodecSettings |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.19)| + +---------------------+-----------------------------+--------------+ + | 0x3B4040| CodecInfoURL |Reclaimed (RFC| + | | |9559, | + | | |Appendix A.20)| + +---------------------+-----------------------------+--------------+ + | 0x3C83AB| PrevFilename |RFC 9559, | + | | |Section | + | | |5.1.2.4 | + +---------------------+-----------------------------+--------------+ + | 0x3CB923| PrevUUID |RFC 9559, | + | | |Section | + | | |5.1.2.3 | + +---------------------+-----------------------------+--------------+ + | 0x3E83BB| NextFilename |RFC 9559, | + | | |Section | + | | |5.1.2.6 | + +---------------------+-----------------------------+--------------+ + | 0x3EB923| NextUUID |RFC 9559, | + | | |Section | + | | |5.1.2.5 | + +---------------------+-----------------------------+--------------+ + | 0x3FFFFF| Reserved |RFC 9559 | + +---------------------+-----------------------------+--------------+ + |0x01000000-0x101FFFFE| Not valid for use as an |RFC 9559, | + | | Element ID |Section 27.1 | + +---------------------+-----------------------------+--------------+ + | 0x1043A770| Chapters |RFC 9559, | + | | |Section 5.1.7 | + +---------------------+-----------------------------+--------------+ + | 0x114D9B74| SeekHead |RFC 9559, | + | | |Section 5.1.1 | + +---------------------+-----------------------------+--------------+ + | 0x1254C367| Tags |RFC 9559, | + | | |Section 5.1.8 | + +---------------------+-----------------------------+--------------+ + | 0x1549A966| Info |RFC 9559, | + | | |Section 5.1.2 | + +---------------------+-----------------------------+--------------+ + | 0x1654AE6B| Tracks |RFC 9559, | + | | |Section 5.1.4 | + +---------------------+-----------------------------+--------------+ + | 0x18538067| Segment |RFC 9559, | + | | |Section 5.1 | + +---------------------+-----------------------------+--------------+ + | 0x1941A469| Attachments |RFC 9559, | + | | |Section 5.1.6 | + +---------------------+-----------------------------+--------------+ + | 0x1C53BB6B| Cues |RFC 9559, | + | | |Section 5.1.5 | + +---------------------+-----------------------------+--------------+ + | 0x1F43B675| Cluster |RFC 9559, | + | | |Section 5.1.3 | + +---------------------+-----------------------------+--------------+ + | 0x1FFFFFFF| Reserved |RFC 9559 | + +---------------------+-----------------------------+--------------+ + + Table 53: Initial Contents of "Matroska Element IDs" Registry + +27.2. Matroska Compression Algorithms Registry + + IANA has created a new registry called the "Matroska Compression + Algorithms" registry. The values correspond to the unsigned integer + ContentCompAlgo value described in Section 5.1.4.1.31.6. + + To register a new Compression Algorithm in this registry, one needs a + Compression Algorithm value, a description, a Change Controller, and + a Reference to a document describing the Compression Algorithm. + + The Compression Algorithms are to be allocated according to the + "Specification Required" policy [RFC8126]. Available values range + from 4-18446744073709551615. + + Table 54 shows the initial contents of the "Matroska Compression + Algorithms" registry. The Change Controller for the initial entries + is the IETF. + + +=======================+=============+===================+ + | Compression Algorithm | Description | Reference | + +=======================+=============+===================+ + | 0 | zlib | RFC 9559, Section | + | | | 5.1.4.1.31.6 | + +-----------------------+-------------+-------------------+ + | 1 | bzlib | RFC 9559, Section | + | | | 5.1.4.1.31.6 | + +-----------------------+-------------+-------------------+ + | 2 | lzo1x | RFC 9559, Section | + | | | 5.1.4.1.31.6 | + +-----------------------+-------------+-------------------+ + | 3 | Header | RFC 9559, Section | + | | Stripping | 5.1.4.1.31.6 | + +-----------------------+-------------+-------------------+ + + Table 54: Initial Contents of "Matroska Compression + Algorithms" Registry + +27.3. Matroska Encryption Algorithms Registry + + IANA has created a new registry called the "Matroska Encryption + Algorithms" registry. The values correspond to the unsigned integer + ContentEncAlgo value described in Section 5.1.4.1.31.9. + + To register a new Encryption Algorithm in this registry, one needs an + Encryption Algorithm value, a description, a Change Controller, and + an optional Reference to a document describing the Encryption + Algorithm. + + The Encryption Algorithms are to be allocated according to the "First + Come First Served" policy [RFC8126]. Available values range from + 6-18446744073709551615. + + Table 55 shows the initial contents of the "Matroska Encryption + Algorithms" registry. The Change Controller for the initial entries + is the IETF. + + +======================+===============+===================+ + | Encryption Algorithm | Description | Reference | + +======================+===============+===================+ + | 0 | Not encrypted | RFC 9559, Section | + | | | 5.1.4.1.31.9 | + +----------------------+---------------+-------------------+ + | 1 | DES | RFC 9559, Section | + | | | 5.1.4.1.31.9 | + +----------------------+---------------+-------------------+ + | 2 | 3DES | RFC 9559, Section | + | | | 5.1.4.1.31.9 | + +----------------------+---------------+-------------------+ + | 3 | Twofish | RFC 9559, Section | + | | | 5.1.4.1.31.9 | + +----------------------+---------------+-------------------+ + | 4 | Blowfish | RFC 9559, Section | + | | | 5.1.4.1.31.9 | + +----------------------+---------------+-------------------+ + | 5 | AES | RFC 9559, Section | + | | | 5.1.4.1.31.9 | + +----------------------+---------------+-------------------+ + + Table 55: Initial Contents of "Matroska Encryption + Algorithms" Registry + +27.4. Matroska AES Cipher Modes Registry + + IANA has created a new registry called the "Matroska AES Cipher + Modes" registry. The values correspond to the unsigned integer + AESSettingsCipherMode value described in Section 5.1.4.1.31.12. + + To register a new AES Cipher Mode in this registry, one needs an AES + Cipher Mode value, a description, a Change Controller, and an + optional Reference to a document describing the AES Cipher Mode. + + The AES Cipher Modes are to be allocated according to the "First Come + First Served" policy [RFC8126]. Available values range from + 3-18446744073709551615. + + The value 0 is not valid for use as an AES Cipher Mode. + + Table 56 shows the initial contents of the "Matroska AES Cipher + Modes" registry. The Change Controller for the initial entries is + the IETF. + + +=================+======================+===================+ + | AES Cipher Mode | Description | Reference | + +=================+======================+===================+ + | 0 | Not valid for use as | RFC 9559, Section | + | | an AES Cipher Mode | 5.1.4.1.31.12 | + +-----------------+----------------------+-------------------+ + | 1 | AES-CTR | RFC 9559, Section | + | | | 5.1.4.1.31.12 | + +-----------------+----------------------+-------------------+ + | 2 | AES-CBC | RFC 9559, Section | + | | | 5.1.4.1.31.12 | + +-----------------+----------------------+-------------------+ + + Table 56: Initial Contents of "Matroska AES Cipher Modes" + Registry + +27.5. Matroska Content Encoding Scopes Registry + + IANA has created a new registry called the "Matroska Content Encoding + Scopes" registry. The values correspond to the unsigned integer + ContentEncodingScope value described in Section 5.1.4.1.31.3. + + To register a new Content Encoding Scope in this registry, one needs + a Content Encoding Scope value, a description, a Change Controller, + and a Reference to a document describing the Content Encoding Scope. + + The Content Encoding Scopes are to be allocated according to the + "Specification Required" policy [RFC8126]. Available values range + from 0x8-0x8000000000000000. + + The Content Encoding Scope is a bit-field value, so only power of 2 + values can be registered. + + The value 0 is not valid for use as a Content Encoding Scope. + + Table 57 shows the initial contents of the "Matroska Content Encoding + Scopes" registry. The Change Controller for the initial entries is + the IETF. + + +================+========================+===================+ + | Content | Description | Reference | + | Encoding Scope | | | + +================+========================+===================+ + | 0x0 | Not valid for use as a | RFC 9559, Section | + | | Content Encoding Scope | 5.1.4.1.31.3 | + +----------------+------------------------+-------------------+ + | 0x1 | Block | RFC 9559, Section | + | | | 5.1.4.1.31.3 | + +----------------+------------------------+-------------------+ + | 0x2 | Private | RFC 9559, Section | + | | | 5.1.4.1.31.3 | + +----------------+------------------------+-------------------+ + | 0x4 | Next | RFC 9559, Section | + | | | 5.1.4.1.31.3 | + +----------------+------------------------+-------------------+ + + Table 57: Initial Contents of "Matroska Content Encoding + Scopes" Registry + +27.6. Matroska Content Encoding Types Registry + + IANA has created a new registry called the "Matroska Content Encoding + Types" registry. The values correspond to the unsigned integer + ContentEncodingType value described in Section 5.1.4.1.31.4. + + To register a new Content Encoding Type in this registry, one needs a + Content Encoding Type value, a description, a Change Controller, and + a Reference to a document describing the Content Encoding Type. + + The Content Encoding Types are to be allocated according to the + "Specification Required" policy [RFC8126]. Available values range + from 2-18446744073709551615. + + Table 58 shows the initial contents of the "Matroska Content Encoding + Types" registry. The Change Controller for the initial entries is + the IETF. + + +=======================+=============+===================+ + | Content Encoding Type | Description | Reference | + +=======================+=============+===================+ + | 0 | Compression | RFC 9559, Section | + | | | 5.1.4.1.31.4 | + +-----------------------+-------------+-------------------+ + | 1 | Encryption | RFC 9559, Section | + | | | 5.1.4.1.31.4 | + +-----------------------+-------------+-------------------+ + + Table 58: Initial Contents of "Matroska Content + Encoding Types" Registry + +27.7. Matroska Stereo Modes Registry + + IANA has created a new registry called the "Matroska Stereo Modes" + registry. The values correspond to the unsigned integer StereoMode + value described in Section 5.1.4.1.28.3. + + To register a new Stereo Mode in this registry, one needs a Stereo + Mode value, a description, a Change Controller, and a Reference to a + document describing the Stereo Mode. + + The Stereo Modes are to be allocated according to the "Specification + Required" policy [RFC8126]. Available values range from + 15-18446744073709551615. + + Table 59 shows the initial contents of the "Matroska Stereo Modes" + registry. The Change Controller for the initial entries is the IETF. + + +=============+============================+===================+ + | Stereo Mode | Description | Reference | + +=============+============================+===================+ + | 0 | mono | RFC 9559, Section | + | | | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 1 | side by side (left eye | RFC 9559, Section | + | | first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 2 | top - bottom (right eye is | RFC 9559, Section | + | | first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 3 | top - bottom (left eye is | RFC 9559, Section | + | | first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 4 | checkboard (right eye is | RFC 9559, Section | + | | first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 5 | checkboard (left eye is | RFC 9559, Section | + | | first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 6 | row interleaved (right eye | RFC 9559, Section | + | | is first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 7 | row interleaved (left eye | RFC 9559, Section | + | | is first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 8 | column interleaved (right | RFC 9559, Section | + | | eye is first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 9 | column interleaved (left | RFC 9559, Section | + | | eye is first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 10 | anaglyph (cyan/red) | RFC 9559, Section | + | | | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 11 | side by side (right eye | RFC 9559, Section | + | | first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 12 | anaglyph (green/magenta) | RFC 9559, Section | + | | | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 13 | both eyes laced in one | RFC 9559, Section | + | | Block (left eye is first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + | 14 | both eyes laced in one | RFC 9559, Section | + | | Block (right eye is first) | 5.1.4.1.28.3 | + +-------------+----------------------------+-------------------+ + + Table 59: Initial Contents of "Matroska Stereo Modes" Registry + +27.8. Matroska Alpha Modes Registry + + IANA has created a new registry called the "Matroska Alpha Modes" + registry. The values correspond to the unsigned integer AlphaMode + value described in Section 5.1.4.1.28.4. + + To register a new Alpha Mode in this registry, one needs an Alpha + Mode value, a description, a Change Controller, and an optional + Reference to a document describing the Alpha Mode. + + The Alpha Modes are to be allocated according to the "First Come + First Served" policy [RFC8126]. Available values range from + 2-18446744073709551615. + + Table 60 shows the initial contents of the "Matroska Alpha Modes" + registry. The Change Controller for the initial entries is the IETF. + + +============+=============+================================+ + | Alpha Mode | Description | Reference | + +============+=============+================================+ + | 0 | none | RFC 9559, Section 5.1.4.1.28.4 | + +------------+-------------+--------------------------------+ + | 1 | present | RFC 9559, Section 5.1.4.1.28.4 | + +------------+-------------+--------------------------------+ + + Table 60: Initial Contents of "Matroska Alpha Modes" Registry + +27.9. Matroska Display Units Registry + + IANA has created a new registry called the "Matroska Display Units" + registry. The values correspond to the unsigned integer DisplayUnit + value described in Section 5.1.4.1.28.14. + + To register a new Display Unit in this registry, one needs a Display + Unit value, a description, a Change Controller, and a Reference to a + document describing the Display Unit. + + The Display Units are to be allocated according to the "Specification + Required" policy [RFC8126]. Available values range from + 5-18446744073709551615. + + Table 61 shows the initial contents of the "Matroska Display Units" + registry. The Change Controller for the initial entries is the IETF. + + +==============+==============+=================================+ + | Display Unit | Description | Reference | + +==============+==============+=================================+ + | 0 | pixels | RFC 9559, Section 5.1.4.1.28.14 | + +--------------+--------------+---------------------------------+ + | 1 | centimeters | RFC 9559, Section 5.1.4.1.28.14 | + +--------------+--------------+---------------------------------+ + | 2 | inches | RFC 9559, Section 5.1.4.1.28.14 | + +--------------+--------------+---------------------------------+ + | 3 | display | RFC 9559, Section 5.1.4.1.28.14 | + | | aspect ratio | | + +--------------+--------------+---------------------------------+ + | 4 | unknown | RFC 9559, Section 5.1.4.1.28.14 | + +--------------+--------------+---------------------------------+ + + Table 61: Initial Contents of "Matroska Display Units" Registry + +27.10. Matroska Horizontal Chroma Sitings Registry + + IANA has created a new registry called the "Matroska Horizontal + Chroma Sitings" registry. The values correspond to the unsigned + integer ChromaSitingHorz value described in Section 5.1.4.1.28.23. + + To register a new Horizontal Chroma Siting in this registry, one + needs a Horizontal Chroma Siting value, a description, a Change + Controller, and an optional Reference to a document describing the + Horizontal Chroma Siting. + + The Horizontal Chroma Sitings are to be allocated according to the + "First Come First Served" policy [RFC8126]. Available values range + from 3-18446744073709551615. + + Table 62 shows the initial contents of the "Matroska Horizontal + Chroma Sitings" registry. The Change Controller for the initial + entries is the IETF. + + +==========================+=============+===================+ + | Horizontal Chroma Siting | Description | Reference | + +==========================+=============+===================+ + | 0 | unspecified | RFC 9559, Section | + | | | 5.1.4.1.28.23 | + +--------------------------+-------------+-------------------+ + | 1 | left | RFC 9559, Section | + | | collocated | 5.1.4.1.28.23 | + +--------------------------+-------------+-------------------+ + | 2 | half | RFC 9559, Section | + | | | 5.1.4.1.28.23 | + +--------------------------+-------------+-------------------+ + + Table 62: Initial Contents of "Matroska Horizontal Chroma + Sitings" Registry + +27.11. Matroska Vertical Chroma Sitings Registry + + IANA has created a new registry called the "Matroska Vertical Chroma + Sitings" registry. The values correspond to the unsigned integer + ChromaSitingVert value described in Section 5.1.4.1.28.24. + + To register a new Vertical Chroma Siting in this registry, one needs + a Vertical Chroma Siting value, a description, a Change Controller, + and an optional Reference to a document describing the Vertical + Chroma Siting. + + The Vertical Chroma Sitings are to be allocated according to the + "First Come First Served" policy [RFC8126]. Available values range + from 3-18446744073709551615. + + Table 63 shows the initial contents of the "Matroska Vertical Chroma + Sitings" registry. The Change Controller for the initial entries is + the IETF. + + +========================+=============+===================+ + | Vertical Chroma Siting | Description | Reference | + +========================+=============+===================+ + | 0 | unspecified | RFC 9559, Section | + | | | 5.1.4.1.28.24 | + +------------------------+-------------+-------------------+ + | 1 | top | RFC 9559, Section | + | | collocated | 5.1.4.1.28.24 | + +------------------------+-------------+-------------------+ + | 2 | half | RFC 9559, Section | + | | | 5.1.4.1.28.24 | + +------------------------+-------------+-------------------+ + + Table 63: Initial Contents of "Matroska Vertical Chroma + Sitings" Registry + +27.12. Matroska Color Ranges Registry + + IANA has created a new registry called the "Matroska Color Ranges" + registry. The values correspond to the unsigned integer Range value + described in Section 5.1.4.1.28.25. + + To register a new Color Range in this registry, one needs a Color + Range value, a description, a Change Controller, and a Reference to a + document describing the Color Range. + + The Color Ranges are to be allocated according to the "Specification + Required" policy [RFC8126]. Available values range from + 4-18446744073709551615. + + Table 64 shows the initial contents of the "Matroska Color Ranges" + registry. The Change Controller for the initial entries is the IETF. + + +=============+===============================+===================+ + | Color Range | Description | Reference | + +=============+===============================+===================+ + | 0 | unspecified | RFC 9559, Section | + | | | 5.1.4.1.28.25 | + +-------------+-------------------------------+-------------------+ + | 1 | broadcast range | RFC 9559, Section | + | | | 5.1.4.1.28.25 | + +-------------+-------------------------------+-------------------+ + | 2 | full range (no clipping) | RFC 9559, Section | + | | | 5.1.4.1.28.25 | + +-------------+-------------------------------+-------------------+ + | 3 | defined by MatrixCoefficients | RFC 9559, Section | + | | / TransferCharacteristics | 5.1.4.1.28.25 | + +-------------+-------------------------------+-------------------+ + + Table 64: Initial Contents of "Matroska Color Ranges" Registry + +27.13. Matroska Tags Target Types Registry + + IANA has created a new registry called the "Matroska Tags Target + Types" registry. The values correspond to the unsigned integer + TargetTypeValue value described in Section 5.1.8.1.1.1. + + To register a new Tags Target Type in this registry, one needs a Tags + Target Type value, a description, a Change Controller, and a + Reference to a document describing the Tags Target Type. + + The Tags Target Types are to be allocated according to the + "Specification Required" policy [RFC8126]. Available values range + from 1-9, 11-19, 21-29, 31-39, 41-49, 51-59, 61-69, and + 71-18446744073709551615. + + The value 0 is not valid for use as a Tags Target Type. + + Table 65 shows the initial contents of the "Matroska Tags Target + Types" registry. The Change Controller for the initial entries is + the IETF. + + +==================+==========================+===================+ + | Tags Target Type | Description | Reference | + +==================+==========================+===================+ + | 70 | COLLECTION | RFC 9559, Section | + | | | 5.1.8.1.1.1 | + +------------------+--------------------------+-------------------+ + | 60 | EDITION / ISSUE / VOLUME | RFC 9559, Section | + | | / OPUS / SEASON / SEQUEL | 5.1.8.1.1.1 | + +------------------+--------------------------+-------------------+ + | 50 | ALBUM / OPERA / CONCERT | RFC 9559, Section | + | | / MOVIE / EPISODE | 5.1.8.1.1.1 | + +------------------+--------------------------+-------------------+ + | 40 | PART / SESSION | RFC 9559, Section | + | | | 5.1.8.1.1.1 | + +------------------+--------------------------+-------------------+ + | 30 | TRACK / SONG / CHAPTER | RFC 9559, Section | + | | | 5.1.8.1.1.1 | + +------------------+--------------------------+-------------------+ + | 20 | SUBTRACK / MOVEMENT / | RFC 9559, Section | + | | SCENE | 5.1.8.1.1.1 | + +------------------+--------------------------+-------------------+ + | 10 | SHOT | RFC 9559, Section | + | | | 5.1.8.1.1.1 | + +------------------+--------------------------+-------------------+ + | 0 | Not valid for use as a | RFC 9559, Section | + | | Tags Target Type | 5.1.8.1.1.1 | + +------------------+--------------------------+-------------------+ + + Table 65: Initial Contents of "Matroska Tags Target Types" Registry + +27.14. Matroska Chapter Codec IDs Registry + + IANA has created a new registry called the "Matroska Chapter Codec + IDs" registry. The values correspond to the unsigned integer + ChapProcessCodecID, ChapterTranslateCodec, and TrackTranslateCodec + values described in Section 5.1.7.1.4.15. + + To register a new Chapter Codec ID in this registry, one needs a + Chapter Codec ID value, a description, a Change Controller, and a + Reference to a document describing the Chapter Codec ID. + + The Chapter Codec IDs are to be allocated according to the + "Specification Required" policy [RFC8126]. Available values range + from 2-18446744073709551615. + + Table 66 shows the initial contents of the "Matroska Chapter Codec + IDs" registry. The Change Controller for the initial entries is the + IETF. + + +==================+=================+===================+ + | Chapter Codec ID | Description | Reference | + +==================+=================+===================+ + | 0 | Matroska Script | RFC 9559, Section | + | | | 5.1.7.1.4.15 | + +------------------+-----------------+-------------------+ + | 1 | DVD-menu | RFC 9559, Section | + | | | 5.1.7.1.4.15 | + +------------------+-----------------+-------------------+ + + Table 66: Initial Contents of "Matroska Chapter Codec + IDs" Registry + +27.15. Matroska Projection Types Registry + + IANA has created a new registry called the "Matroska Projection + Types" registry. The values correspond to the unsigned integer + ProjectionType value described in Section 5.1.4.1.28.42. + + To register a new Projection Type in this registry, one needs a + Projection Type value, a description, a Change Controller, and an + optional Reference to a document describing the Projection Type. + + The Projection Types are to be allocated according to the "First Come + First Served" policy [RFC8126]. Available values range from + 4-18446744073709551615. + + Table 67 shows the initial contents of the "Matroska Projection + Types" registry. The Change Controller for the initial entries is + the IETF. + + +=================+=================+===================+ + | Projection Type | Description | Reference | + +=================+=================+===================+ + | 0 | rectangular | RFC 9559, Section | + | | | 5.1.4.1.28.42 | + +-----------------+-----------------+-------------------+ + | 1 | equirectangular | RFC 9559, Section | + | | | 5.1.4.1.28.42 | + +-----------------+-----------------+-------------------+ + | 2 | cubemap | RFC 9559, Section | + | | | 5.1.4.1.28.42 | + +-----------------+-----------------+-------------------+ + | 3 | mesh | RFC 9559, Section | + | | | 5.1.4.1.28.42 | + +-----------------+-----------------+-------------------+ + + Table 67: Initial Contents of "Matroska Projection + Types" Registry + +27.16. Matroska Track Types Registry + + IANA has created a new registry called the "Matroska Track Types" + registry. The values correspond to the unsigned integer TrackType + value described in Section 5.1.4.1.3. + + To register a new Track Type in this registry, one needs a Track Type + value, a description, a Change Controller, and a Reference to a + document describing the Track Type. + + The Track Types are to be allocated according to the "Specification + Required" policy [RFC8126]. Available values range from 4-15, 19-31, + and 34-18446744073709551615. + + The value 0 is not valid for use as a Track Type. + + Table 68 shows the initial contents of the "Matroska Track Types" + registry. The Change Controller for the initial entries is the IETF. + + +============+===================+===================+ + | Track Type | Description | Reference | + +============+===================+===================+ + | 0 | Not valid for use | RFC 9559, | + | | as a Track Type | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + | 1 | video | RFC 9559, | + | | | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + | 2 | audio | RFC 9559, | + | | | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + | 3 | complex | RFC 9559, | + | | | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + | 16 | logo | RFC 9559, | + | | | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + | 17 | subtitle | RFC 9559, | + | | | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + | 18 | buttons | RFC 9559, | + | | | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + | 32 | control | RFC 9559, | + | | | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + | 33 | metadata | RFC 9559, | + | | | Section 5.1.4.1.3 | + +------------+-------------------+-------------------+ + + Table 68: Initial Contents of "Matroska Track + Types" Registry + +27.17. Matroska Track Plane Types Registry + + IANA has created a new registry called the "Matroska Track Plane + Types" registry. The values correspond to the unsigned integer + TrackPlaneType value described in Section 5.1.4.1.30.4. + + To register a new Track Plane Type in this registry, one needs a + Track Plane Type value, a description, a Change Controller, and an + optional Reference to a document describing the Track Plane Type. + + The Track Plane Types are to be allocated according to the "First + Come First Served" policy [RFC8126]. Available values range from + 3-18446744073709551615. + + Table 69 shows the initial contents of the "Matroska Track Plane + Types" registry. The Change Controller for the initial entries is + the IETF. + + +==================+=============+================================+ + | Track Plane Type | Description | Reference | + +==================+=============+================================+ + | 0 | left eye | RFC 9559, Section 5.1.4.1.30.4 | + +------------------+-------------+--------------------------------+ + | 1 | right eye | RFC 9559, Section 5.1.4.1.30.4 | + +------------------+-------------+--------------------------------+ + | 2 | background | RFC 9559, Section 5.1.4.1.30.4 | + +------------------+-------------+--------------------------------+ + + Table 69: Initial Contents of "Matroska Track Plane Types" Registry + +27.18. Media Types + + Matroska files and streams are found in three main forms: audio- + video, audio-only, and (occasionally) stereoscopic video. + + Historically, Matroska files and streams have used the following + media types with an "x-" prefix. For better compatibility, a system + SHOULD be able to handle both formats. Newer systems SHOULD NOT use + the historic format and use the format that follows the format in + [RFC6838] instead. + + IANA has registered three media types per the templates (see + [RFC6838]) in the following subsections. + +27.18.1. For Files Containing Video Tracks + + Type name: video + + Subtype name: matroska + + Required parameters: N/A + + Optional parameters: N/A + + Encoding considerations: As per RFCs 9559 and 8794 + + Security considerations: See Section 26 of RFC 9559. + + Interoperability considerations: Due to the extensibility of + Matroska, it is possible to encounter files with unknown but valid + EBML Elements. Readers should be ready to handle this case. The + fixed byte order, octet boundaries, and UTF-8 usage allow for + broad interoperability. + + Published specification: RFC 9559 + + Applications that use this media type: FFmpeg, VLC, etc. + + Fragment identifier considerations: N/A + + Additional information: + + Deprecated alias names for this type: video/x-matroska + Magic number(s): N/A + File extension(s): mkv + Macintosh file type code(s): N/A + + Person & email address to contact for further information: IETF + CELLAR WG (cellar@ietf.org) + + Intended usage: COMMON + + Restrictions on usage: None + + Author: IETF CELLAR WG + + Change controller: IETF + +27.18.2. For Files Containing Audio Tracks with No Video Tracks + + Type name: audio + + Subtype name: matroska + + Required parameters: N/A + + Optional parameters: N/A + + Encoding considerations: As per RFCs 9559 and 8794 + + Security considerations: See Section 26 of RFC 9559. + + Interoperability considerations: Due to the extensibility of + Matroska, it is possible to encounter files with unknown but valid + EBML Elements. Readers should be ready to handle this case. The + fixed byte order, octet boundaries, and UTF-8 usage allow for + broad interoperability. + + Published specification: RFC 9559 + + Applications that use this media type: FFmpeg, VLC, etc. + + Fragment identifier considerations: N/A + + Additional information: + + Deprecated alias names for this type: audio/x-matroska + Magic number(s): N/A + File extension(s): mka + Macintosh file type code(s): N/A + + Person & email address to contact for further information: IETF + CELLAR WG (cellar@ietf.org) + + Intended usage: COMMON + + Restrictions on usage: None + + Author: IETF CELLAR WG + + Change controller: IETF + +27.18.3. For Files Containing a Stereoscopic Video Track + + Type name: video + + Subtype name: matroska-3d + + Required parameters: N/A + + Optional parameters: N/A + + Encoding considerations: As per RFCs 9559 and 8794 + + Security considerations: See Section 26 of RFC 9559. + + Interoperability considerations: Due to the extensibility of + Matroska, it is possible to encounter files with unknown but valid + EBML Elements. Readers should be ready to handle this case. The + fixed byte order, octet boundaries, and UTF-8 usage allow for + broad interoperability. + + Published specification: RFC 9559 + + Applications that use this media type: FFmpeg, VLC, etc. + + Fragment identifier considerations: N/A + + Additional information: + + Deprecated alias names for this type: video/x-matroska-3d + Magic number(s): N/A + File extension(s): mk3d + Macintosh file type code(s): N/A + + Person & email address to contact for further information: IETF + CELLAR WG (cellar@ietf.org) + + Intended usage: COMMON + + Restrictions on usage: None + + Author: IETF CELLAR WG + + Change controller: IETF + +28. References + +28.1. Normative References + + [CIE-1931] Wikipedia, "CIE 1931 color space", + . + + [ISO639-2] International Organization for Standardization, "Codes for + the Representation of Names of Languages", ISO 639-2, + December 2017, . + + [ISO9899] International Organization for Standardization, + "Information technology -- Programming languages -- C", + ISO/IEC 9899:2018, June 2018, + . + + [ITU-H.273] + ITU-T, "Coding-independent code points for video signal + type identification", ITU-T Recommendation H.273, + September 2023, + . + + [RFC1950] Deutsch, P. and J. Gailly, "ZLIB Compressed Data Format + Specification version 3.3", RFC 1950, + DOI 10.17487/RFC1950, May 1996, + . + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, + DOI 10.17487/RFC2119, March 1997, + . + + [RFC5646] Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying + Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646, + September 2009, . + + [RFC6838] Freed, N., Klensin, J., and T. Hansen, "Media Type + Specifications and Registration Procedures", BCP 13, + RFC 6838, DOI 10.17487/RFC6838, January 2013, + . + + [RFC8081] Lilley, C., "The "font" Top-Level Media Type", RFC 8081, + DOI 10.17487/RFC8081, February 2017, + . + + [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for + Writing an IANA Considerations Section in RFCs", BCP 26, + RFC 8126, DOI 10.17487/RFC8126, June 2017, + . + + [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC + 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, + May 2017, . + + [RFC8794] Lhomme, S., Rice, D., and M. Bunkus, "Extensible Binary + Meta Language", RFC 8794, DOI 10.17487/RFC8794, July 2020, + . + + [RFC9562] Davis, K., Peabody, B., and P. Leach, "Universally Unique + IDentifiers (UUIDs)", RFC 9562, DOI 10.17487/RFC9562, May + 2024, . + +28.2. Informative References + + [AVIFormat] + Microsoft Corporation, "AVI RIFF File Reference", June + 2023, . + + [Blowfish] Schneier, B., "The Blowfish Encryption Algorithm", 1993, + . + + [BZIP2] Seward, J., "bzip2", July 2019, + . + + [DivXTrickTrack] + "Smooth FF/RW", December 2010, + . + + [DivXWorldFonts] + "World Fonts", December 2010, + . + + [DVD-Video] + DVD Forum, "DVD-Books: Part 3 DVD-Video Book", November + 1995, . + + [Err7189] RFC Errata, Erratum ID 7189, RFC 8794, + . + + [Err7191] RFC Errata, Erratum ID 7191, RFC 8794, + . + + [FIPS197] National Institute of Standards and Technology (NIST), + "Advanced Encryption Standard (AES)", FIPS PUB 197, + DOI 10.6028/NIST.FIPS.197, November 2001, + . + + [FIPS46-3] National Institute of Standards and Technology (NIST), + "Data Encryption Standard (DES)", FIPS PUB 46, October + 1999, + . + + [FourCC-RGB] + FOURCC, "RGB pixel formats", + . + + [FourCC-YUV] + FOURCC, "YUV pixel formats", + . + + [JPEG] ITU-T, "INFORMATION TECHNOLOGY - DIGITAL COMPRESSION AND + CODING OF CONTINUOUS-TONE STILL IMAGES - REQUIREMENTS AND + GUIDELINES", ITU-T Recommendation T.81, September 1992, + . + + [libmatroska] + "libmatroska", March 2024, + . + + [LZO] Tarreau, W. and R. Rodgman, "LZO stream format as + understood by Linux's LZO decompressor", October 2018, + . + + [MatroskaCodec] + Lhomme, S., Bunkus, M., and D. Rice, "Matroska Media + Container Codec Specifications", Work in Progress, + Internet-Draft, draft-ietf-cellar-codec-13, 5 May 2024, + . + + [MatroskaTags] + Lhomme, S., Bunkus, M., and D. Rice, "Matroska Media + Container Tag Specifications", Work in Progress, Internet- + Draft, draft-ietf-cellar-tags-13, 5 May 2024, + . + + [MCF] "MCF specification, introduction", + . + + [MSRGB] Microsoft Corporation, "Compression Enumeration", June + 2021, . + + [MSYUV16] Microsoft Corporation, "10-bit and 16-bit YUV Video + Formats", November 2022, . + + [MSYUV8] Microsoft Corporation, "Recommended 8-Bit YUV Formats for + Video Rendering", January 2021, + . + + [RFC0959] Postel, J. and J. Reynolds, "File Transfer Protocol", + STD 9, RFC 959, DOI 10.17487/RFC0959, October 1985, + . + + [RFC2083] Boutell, T., "PNG (Portable Network Graphics) + Specification Version 1.0", RFC 2083, + DOI 10.17487/RFC2083, March 1997, + . + + [RFC3533] Pfeiffer, S., "The Ogg Encapsulation Format Version 0", + RFC 3533, DOI 10.17487/RFC3533, May 2003, + . + + [RFC4732] Handley, M., Ed., Rescorla, E., Ed., and IAB, "Internet + Denial-of-Service Considerations", RFC 4732, + DOI 10.17487/RFC4732, December 2006, + . + + [RFC9110] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, + Ed., "HTTP Semantics", STD 97, RFC 9110, + DOI 10.17487/RFC9110, June 2022, + . + + [SMB-CIFS] Microsoft Corporation, "[MS-CIFS]: Common Internet File + System (CIFS) Protocol", October 2020, + . + + [SP800-38A] + National Institute of Standards and Technology (NIST), + "Recommendation for Block Cipher Modes of Operation: + Methods and Techniques", DOI 10.6028/NIST.SP.800-38A, NIST + Special Publication 800-38A, December 2001, + . + + [SP800-67] National Institute of Standards and Technology (NIST), + "Recommendation for the Triple Data Encryption Algorithm + (TDEA) Block Cipher", DOI 10.6028/NIST.SP.800-67r2, NIST + Special Publication 800-67, November 2017, + . + + [Twofish] Schneier, B., Kelsey, J., Whiting, D., Wagner, D., Hall, + C., and N. Ferguson, "Twofish: A 128-Bit Block Cipher", + June 1998, + . + + [WebM-Enc] Galligan, F., "WebM Encryption", September 2016, + . + + [WebVTT] Pieters, S., Pfeiffer, S., Ed., Jaegenstedt, P., and I. + Hickson, "WebVTT: The Web Video Text Tracks Format", W3C + Candidate Recommendation, April 2019, + . + +Appendix A. Historic Deprecated Elements + + As Matroska has evolved since 2002, many parts that were considered + for use in the format were never used and often incorrectly designed. + Many of the elements that were defined then are not found in any + known files but were part of public specs. DivX also had a few + custom elements that were designed for custom features. + + In this appendix, we list elements that have a known ID that SHOULD + NOT be reused to avoid colliding with existing files. These might be + reassigned by IANA in the future if there are no more IDs for a given + size. A short description of what each ID was used for is included, + but the text is not normative. + +A.1. SilentTracks Element + + type / id: master / 0x5854 + path: \Segment\Cluster\SilentTracks + documentation: The list of tracks that are not used in that part of + the stream. It is useful when using overlay tracks for seeking or + deciding what track to use. + +A.2. SilentTrackNumber Element + + type / id: uinteger / 0x58D7 + path: \Segment\Cluster\SilentTracks\SilentTrackNumber + documentation: One of the track numbers that is not used from now on + in the stream. It could change later if not specified as silent + in a further Cluster. + +A.3. BlockVirtual Element + + type / id: binary / 0xA2 + path: \Segment\Cluster\BlockGroup\BlockVirtual + documentation: A Block with no data. It must be stored in the + stream at the place the real Block would be in display order. + +A.4. ReferenceVirtual Element + + type / id: integer / 0xFD + path: \Segment\Cluster\BlockGroup\ReferenceVirtual + documentation: The Segment Position of the data that would otherwise + be in position of the virtual block. + +A.5. Slices Element + + type / id: master / 0x8E + path: \Segment\Cluster\BlockGroup\Slices + documentation: Contains slices description. + +A.6. TimeSlice Element + + type / id: master / 0xE8 + path: \Segment\Cluster\BlockGroup\Slices\TimeSlice + documentation: Contains extra time information about the data + contained in the Block. Being able to interpret this element is + not required for playback. + +A.7. LaceNumber Element + + type / id: uinteger / 0xCC + path: \Segment\Cluster\BlockGroup\Slices\TimeSlice\LaceNumber + documentation: The reverse number of the frame in the lace (0 is the + last frame, 1 is the next to last, etc.). Being able to interpret + this element is not required for playback. + +A.8. FrameNumber Element + + type / id: uinteger / 0xCD + path: \Segment\Cluster\BlockGroup\Slices\TimeSlice\FrameNumber + documentation: The number of the frame to generate from this lace + with this delay (allows for the generation of many frames from the + same Block/Frame). + +A.9. BlockAdditionID Element + + type / id: uinteger / 0xCB + path: \Segment\Cluster\BlockGroup\Slices\TimeSlice\BlockAdditionID + documentation: The ID of the BlockAdditional element (0 is the main + Block). + +A.10. Delay Element + + type / id: uinteger / 0xCE + path: \Segment\Cluster\BlockGroup\Slices\TimeSlice\Delay + documentation: The delay to apply to the element, expressed in Track + Ticks; see Section 11.1. + +A.11. SliceDuration Element + + type / id: uinteger / 0xCF + path: \Segment\Cluster\BlockGroup\Slices\TimeSlice\SliceDuration + documentation: The duration to apply to the element, expressed in + Track Ticks; see Section 11.1. + +A.12. ReferenceFrame Element + + type / id: master / 0xC8 + path: \Segment\Cluster\BlockGroup\ReferenceFrame + documentation: Contains information about the last reference frame. + See [DivXTrickTrack]. + +A.13. ReferenceOffset Element + + type / id: uinteger / 0xC9 + path: \Segment\Cluster\BlockGroup\ReferenceFrame\ReferenceOffset + documentation: The relative offset, in bytes, from the previous + BlockGroup element for this Smooth FF/RW video track to the + containing BlockGroup element. See [DivXTrickTrack]. + +A.14. ReferenceTimestamp Element + + type / id: uinteger / 0xCA + path: \Segment\Cluster\BlockGroup\ReferenceFrame\ReferenceTimestamp + documentation: The timestamp of the BlockGroup pointed to by + ReferenceOffset, expressed in Track Ticks; see Section 11.1. See + [DivXTrickTrack]. + +A.15. EncryptedBlock Element + + type / id: binary / 0xAF + path: \Segment\Cluster\EncryptedBlock + documentation: Similar to SimpleBlock (see Section 10.2), but the + data inside the Block are Transformed (encrypted and/or signed). + +A.16. MinCache Element + + type / id: uinteger / 0x6DE7 + path: \Segment\Tracks\TrackEntry\MinCache + documentation: The minimum number of frames a player should be able + to cache during playback. If set to 0, the reference pseudo-cache + system is not used. + +A.17. MaxCache Element + + type / id: uinteger / 0x6DF8 + path: \Segment\Tracks\TrackEntry\MaxCache + documentation: The maximum cache size necessary to store referenced + frames in and the current frame. 0 means no cache is needed. + +A.18. TrackOffset Element + + type / id: integer / 0x537F + path: \Segment\Tracks\TrackEntry\TrackOffset + documentation: A value to add to the Block's Timestamp, expressed in + Matroska Ticks -- i.e., in nanoseconds; see Section 11.1. This + can be used to adjust the playback offset of a track. + +A.19. CodecSettings Element + + type / id: utf-8 / 0x3A9697 + path: \Segment\Tracks\TrackEntry\CodecSettings + documentation: A string describing the encoding setting used. + +A.20. CodecInfoURL Element + + type / id: string / 0x3B4040 + path: \Segment\Tracks\TrackEntry\CodecInfoURL + documentation: A URL to find information about the codec used. + +A.21. CodecDownloadURL Element + + type / id: string / 0x26B240 + path: \Segment\Tracks\TrackEntry\CodecDownloadURL + documentation: A URL to download information about the codec used. + +A.22. CodecDecodeAll Element + + type / id: uinteger / 0xAA + path: \Segment\Tracks\TrackEntry\CodecDecodeAll + documentation: Set to 1 if the codec can decode potentially damaged + data. + +A.23. TrackOverlay Element + + type / id: uinteger / 0x6FAB + path: \Segment\Tracks\TrackEntry\TrackOverlay + documentation: Specify that this track is an overlay track for the + Track specified (in the u-integer). This means that when this + track has a gap on SilentTracks, the overlay track should be used + instead. The order of multiple TrackOverlay matters; the first + one is the one that should be used. If the first one is not + found, it should be the second, etc. + +A.24. AspectRatioType Element + + type / id: uinteger / 0x54B3 + path: \Segment\Tracks\TrackEntry\Video\AspectRatioType + documentation: Specifies the possible modifications to the aspect + ratio. + +A.25. GammaValue Element + + type / id: float / 0x2FB523 + path: \Segment\Tracks\TrackEntry\Video\GammaValue + documentation: Gamma value. + +A.26. FrameRate Element + + type / id: float / 0x2383E3 + path: \Segment\Tracks\TrackEntry\Video\FrameRate + documentation: Number of frames per second. This value is + informational only. It is intended for constant frame rate + streams and should not be used for a variable frame rate + TrackEntry. + +A.27. ChannelPositions Element + + type / id: binary / 0x7D7B + path: \Segment\Tracks\TrackEntry\Audio\ChannelPositions + documentation: Table of horizontal angles for each successive + channel. + +A.28. TrickTrackUID Element + + type / id: uinteger / 0xC0 + path: \Segment\Tracks\TrackEntry\TrickTrackUID + documentation: The TrackUID of the Smooth FF/RW video in the paired + EBML structure corresponding to this video track. See + [DivXTrickTrack]. + +A.29. TrickTrackSegmentUID Element + + type / id: binary / 0xC1 + path: \Segment\Tracks\TrackEntry\TrickTrackSegmentUID + documentation: The SegmentUUID of the Segment containing the track + identified by TrickTrackUID. See [DivXTrickTrack]. + +A.30. TrickTrackFlag Element + + type / id: uinteger / 0xC6 + path: \Segment\Tracks\TrackEntry\TrickTrackFlag + documentation: Set to 1 if this video track is a Smooth FF/RW track. + If set to 1, MasterTrackUID and MasterTrackSegUID should be + present, and BlockGroups for this track must contain + ReferenceFrame structures. Otherwise, TrickTrackUID and + TrickTrackSegUID must be present if this track has a corresponding + Smooth FF/RW track. See [DivXTrickTrack]. + +A.31. TrickMasterTrackUID Element + + type / id: uinteger / 0xC7 + path: \Segment\Tracks\TrackEntry\TrickMasterTrackUID + documentation: The TrackUID of the video track in the paired EBML + structure that corresponds to this Smooth FF/RW track. See + [DivXTrickTrack]. + +A.32. TrickMasterTrackSegmentUID Element + + type / id: binary / 0xC4 + path: \Segment\Tracks\TrackEntry\TrickMasterTrackSegmentUID + documentation: The SegmentUUID of the Segment containing the track + identified by MasterTrackUID. See [DivXTrickTrack]. + +A.33. ContentSignature Element + + type / id: binary / 0x47E3 + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption\ContentSignature + documentation: A cryptographic signature of the contents. + +A.34. ContentSigKeyID Element + + type / id: binary / 0x47E4 + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption\ContentSigKeyID + documentation: This is the ID of the private key that the data was + signed with. + +A.35. ContentSigAlgo Element + + type / id: uinteger / 0x47E5 + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption\ContentSigAlgo + documentation: The algorithm used for the signature. + +A.36. ContentSigHashAlgo Element + + type / id: uinteger / 0x47E6 + path: \Segment\Tracks\TrackEntry\ContentEncodings\ContentEncoding\Co + ntentEncryption\ContentSigHashAlgo + documentation: The hash algorithm used for the signature. + +A.37. CueRefCluster Element + + type / id: uinteger / 0x97 + path: \Segment\Cues\CuePoint\CueTrackPositions\CueReference\CueRefCl + uster + documentation: The Segment Position of the Cluster containing the + referenced Block. + +A.38. CueRefNumber Element + + type / id: uinteger / 0x535F + path: \Segment\Cues\CuePoint\CueTrackPositions\CueReference\CueRefNu + mber + documentation: Number of the referenced Block of Track X in the + specified Cluster. + +A.39. CueRefCodecState Element + + type / id: uinteger / 0xEB + path: \Segment\Cues\CuePoint\CueTrackPositions\CueReference\CueRefCo + decState + documentation: The Segment Position of the Codec State corresponding + to this referenced element. 0 means that the data is taken from + the initial TrackEntry. + +A.40. FileReferral Element + + type / id: binary / 0x4675 + path: \Segment\Attachments\AttachedFile\FileReferral + documentation: A binary value that a track/codec can refer to when + the attachment is needed. + +A.41. FileUsedStartTime Element + + type / id: uinteger / 0x4661 + path: \Segment\Attachments\AttachedFile\FileUsedStartTime + documentation: The timestamp at which this optimized font attachment + comes into context, expressed in Segment Ticks, which are based on + TimestampScale. See [DivXWorldFonts]. + +A.42. FileUsedEndTime Element + + type / id: uinteger / 0x4662 + path: \Segment\Attachments\AttachedFile\FileUsedEndTime + documentation: The timestamp at which this optimized font attachment + goes out of context, expressed in Segment Ticks, which are based + on TimestampScale. See [DivXWorldFonts]. + +A.43. TagDefaultBogus Element + + type / id: uinteger / 0x44B4 + path: \Segment\Tags\Tag\+SimpleTag\TagDefaultBogus + documentation: A variant of the TagDefault element with a bogus + element ID; see Section 5.1.8.1.2.4. + +Authors' Addresses + + Steve Lhomme + Email: slhomme@matroska.org + + + Moritz Bunkus + Email: moritz@bunkus.org + + + Dave Rice + Email: dave@dericed.com -- cgit v1.2.3