path: root/doc/rfc/rfc2387.txt

Network Working Group                                       E. Levinson
Request for Comments: 2387                                  August 1998
Obsoletes: 2112
Category: Standards Track


                The MIME Multipart/Related Content-type

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (1998).  All Rights Reserved.

Abstract

   The Multipart/Related content-type provides a common mechanism for
   representing objects that are aggregates of related MIME body parts.
   This document defines the Multipart/Related content-type and provides
   examples of its use.

1.  Introduction

   Several applications of MIME, including MIME-PEM, and MIME-Macintosh
   and other proposals, require multiple body parts that make sense only
   in the aggregate.  The present approach to these compound objects has
   been to define specific multipart subtypes for each new object.  In
   keeping with the MIME philosophy of having one mechanism to achieve
   the same goal for different purposes, this document describes a
   single mechanism for such aggregate or compound objects.

   The Multipart/Related content-type addresses the MIME representation
   of compound objects.  The object is categorized by a "type"
   parameter.  Additional parameters are provided to indicate a specific
   starting body part or root and auxiliary information which may be
   required when unpacking or processing the object.

   Multipart/Related MIME entities may contain Content-Disposition
   headers that provide suggestions for the storage and display of a
   body part.  Multipart/Related processing takes precedence over
   Content-Disposition; the interaction between them is discussed in
   section 4.



Levinson                    Standards Track                     [Page 1]
^L
RFC 2387                   Multipart/Related                 August 1998


   Responsibility for the display or processing of a Multipart/Related's
   constituent entities rests with the application that handles the
   compound object.

2.  Multipart/Related Registration Information

   The following form is copied from RFC 1590, Appendix A.

     To:  IANA@isi.edu
     Subject:  Registration of new Media Type content-type/subtype

     Media Type name:           Multipart

     Media subtype name:        Related

     Required parameters:       Type, a media type/subtype.

     Optional parameters:       Start
                                Start-info

     Encoding considerations:   Multipart content-types cannot have
                                encodings.

     Security considerations:   Depends solely on the referenced type.

     Published specification:   RFC-REL (this document).

     Person & email address to contact for further information:
                                Edward Levinson
                                47 Clive Street
                                Metuchen, NJ  08840-1060
                                +1 908 494 1606
                                XIson@cnj.digex.net

3.  Intended usage

   The Multipart/Related media type is intended for compound objects
   consisting of several inter-related body parts.  For a
   Multipart/Related object, proper display cannot be achieved by
   individually displaying the constituent body parts.  The content-type
   of the Multipart/Related object is specified by the type parameter.
   The "start" parameter, if given, points, via a content-ID, to the
   body part that contains the object root.  The default root is the
   first body part within the Multipart/Related body.

   The relationships among the body parts of a compound object
   distinguishes it from other object types.  These relationships are
   often represented by links internal to the object's components that



Levinson                    Standards Track                     [Page 2]
^L
RFC 2387                   Multipart/Related                 August 1998


   reference the other components.  Within a single operating
   environment the links are often file names, such links may be
   represented within a MIME message using content-IDs or the value of
   some other "Content-" headers.

3.1.  The Type Parameter

   The type parameter must be specified and its value is the MIME media
   type of the "root" body part.  It permits a MIME user agent to
   determine the content-type without reference to the enclosed body
   part.  If the value of the type parameter and the root body part's
   content-type differ then the User Agent's behavior is undefined.

3.2.  The Start Parameter

   The start parameter, if given, is the content-ID of the compound
   object's "root".  If not present the "root" is the first body part in
   the Multipart/Related entity.  The "root" is the element the
   applications processes first.

3.3.  The Start-Info Parameter

   Additional information can be provided to an application by the
   start-info parameter.  It contains either a string or points, via a
   content-ID, to another MIME entity in the message.  A typical use
   might be to provide additional command line parameters or a MIME
   entity giving auxiliary information for processing the compound
   object.

   Applications that use Multipart/Related must specify the
   interpretation of start-info.  User Agents shall provide the
   parameter's value to the processing application.  Processes can
   distinguish a start-info reference from a token or quoted-string by
   examining the first non-white-space character, "<" indicates a
   reference.

3.4.  Syntax

     related-param   := [ ";" "start" "=" cid ]
                        [ ";" "start-info"  "="
                           ( cid-list / value ) ]
                        [ ";" "type"  "=" type "/" subtype ]
                        ; order independent

     cid-list        := cid cid-list

     cid             := msg-id     ; c.f. [822]




Levinson                    Standards Track                     [Page 3]
^L
RFC 2387                   Multipart/Related                 August 1998


     value           := token / quoted-string    ; c.f. [MIME]
                           ; value cannot begin with "<"

   Note that the parameter values will usually require quoting.  Msg-id
   contains the special characters "<", ">", "@", and perhaps other
   special characters.  If msg-id contains quoted-strings, those quote
   marks must be escaped.  Similarly, the type parameter contains the
   special character "/".

4.  Handling Content-Disposition Headers

   Content-Disposition Headers [DISP] suggest presentation styles for
   MIME body parts.  [DISP] describes two presentation styles, called
   the disposition type, INLINE and ATTACHMENT.  These, used within a
   multipart entity, allow the sender to suggest presentation
   information.  [DISP] also provides for an optional storage (file)
   name.  Content-Disposition headers could appear in one or more body
   parts contained within a Multipart/Related entity.

   Using Content-Disposition headers in addition to Multipart/Related
   provides presentation information to User Agents that do not
   recognize Multipart/Related.  They will treat the multipart as
   Multipart/Mixed and they may find the Content-Disposition information
   useful.

   With Multipart/Related however, the application processing the
   compound object determines the presentation style for all the
   contained parts.  In that context the Content-Disposition header
   information is redundant or even misleading.  Hence, User Agents that
   understand Multipart/Related shall ignore the disposition type within
   a Multipart/Related body part.

   It may be possible for a User Agent capable of handling both
   Multipart/Related and Content-Disposition headers to provide the
   invoked application the Content-Disposition header's optional
   filename parameter to the Multipart/Related.  The use of that
   information will depend on the specific application and should be
   specified when describing the handling of the corresponding compound
   object.  Such descriptions would be appropriate in an RFC registering
   that object's media type.

5.  Examples

5.1 Application/X-FixedRecord

   The X-FixedRecord content-type consists of one or more octet-streams
   and a list of the lengths of each record.  The root, which lists the
   record lengths of each record within the streams.  The record length



Levinson                    Standards Track                     [Page 4]
^L
RFC 2387                   Multipart/Related                 August 1998


   list, type Application/X-FixedRecord, consists of a set of INTEGERs
   in ASCII format, one per line.  Each INTEGER gives the number of
   octets from the octet-stream body part that constitute the next
   "record".

   The example below, uses a single data block.

     Content-Type: Multipart/Related; boundary=example-1
             start="<950120.aaCC@XIson.com>";
             type="Application/X-FixedRecord"
             start-info="-o ps"

     --example-1
     Content-Type: Application/X-FixedRecord
     Content-ID: <950120.aaCC@XIson.com>

     25
     10
     34
     10
     25
     21
     26
     10
     --example-1
     Content-Type: Application/octet-stream
     Content-Description: The fixed length records
     Content-Transfer-Encoding: base64
     Content-ID: <950120.aaCB@XIson.com>

     T2xkIE1hY0RvbmFsZCBoYWQgYSBmYXJtCkUgSS
     BFIEkgTwpBbmQgb24gaGlzIGZhcm0gaGUgaGFk
     IHNvbWUgZHVja3MKRSBJIEUgSSBPCldpdGggYS
     BxdWFjayBxdWFjayBoZXJlLAphIHF1YWNrIHF1
     YWNrIHRoZXJlLApldmVyeSB3aGVyZSBhIHF1YW
     NrIHF1YWNrCkUgSSBFIEkgTwo=

     --example-1--













Levinson                    Standards Track                     [Page 5]
^L
RFC 2387                   Multipart/Related                 August 1998


5.2 Text/X-Okie

   The Text/X-Okie is an invented markup language permitting the
   inclusion of images with text.  A feature of this example is the
   inclusion of two additional body parts, both picture. They are
   referred to internally by the encapsulated document via each
   picture's body part content-ID.  Usage of "cid:", as in this example,
   may be useful for a variety of compound objects.  It is not, however,
   a part of the Multipart/Related specification.

     Content-Type: Multipart/Related; boundary=example-2;
             start="<950118.AEBH@XIson.com>"
             type="Text/x-Okie"

     --example-2
     Content-Type: Text/x-Okie; charset=iso-8859-1;
             declaration="<950118.AEB0@XIson.com>"
     Content-ID: <950118.AEBH@XIson.com>
     Content-Description: Document

     {doc}
     This picture was taken by an automatic camera mounted ...
     {image file=cid:950118.AECB@XIson.com}
     {para}
     Now this is an enlargement of the area ...
     {image file=cid:950118:AFDH@XIson.com}
     {/doc}
     --example-2
     Content-Type: image/jpeg
     Content-ID: <950118.AFDH@XIson.com>
     Content-Transfer-Encoding: BASE64
     Content-Description: Picture A

     [encoded jpeg image]
     --example-2
     Content-Type: image/jpeg
     Content-ID: <950118.AECB@XIson.com>
     Content-Transfer-Encoding: BASE64
     Content-Description: Picture B

     [encoded jpeg image]
     --example-2--

5.3 Content-Disposition

   In the above example each image body part could also have a Content-
   Disposition header.  For example,




Levinson                    Standards Track                     [Page 6]
^L
RFC 2387                   Multipart/Related                 August 1998


     --example-2
     Content-Type: image/jpeg
     Content-ID: <950118.AECB@XIson.com>
     Content-Transfer-Encoding: BASE64
     Content-Description: Picture B
     Content-Disposition: INLINE

     [encoded jpeg image]
     --example-2--

   User Agents that recognize Multipart/Related will ignore the
   Content-Disposition header's disposition type.  Other User Agents
   will process the Multipart/Related as Multipart/Mixed and may make
   use of that header's information.

6.  User Agent Requirements

   User agents that do not recognize Multipart/Related shall, in
   accordance with [MIME], treat the entire entity as Multipart/Mixed.
   MIME User Agents that do recognize Multipart/Related entities but are
   unable to process the given type should give the user the option of
   suppressing the entire Multipart/Related body part shall be.

   Existing MIME-capable mail user agents (MUAs) handle the existing
   media types in a straightforward manner.  For discrete media types
   (e.g. text, image, etc.) the body of the entity can be directly
   passed to a display process.  Similarly the existing composite
   subtypes can be reduced to handing one or more discrete types.
   Handling Multipart/Related differs in that processing cannot be
   reduced to handling the individual entities.

   The following sections discuss what information the processing
   application requires.

   It is possible that an application specific "receiving agent" will
   manipulate the entities for display prior to invoking actual
   application process.  Okie, above, is an example of this; it may need
   a receiving agent to parse the document and substitute local file
   names for the originator's file names.  Other applications may just
   require a table showing the correspondence between the local file
   names and the originator's.  The receiving agent takes responsibility
   for such processing.

6.1 Data Requirements

   MIME-capable mail user agents (MUAs) are required to provide the
   application:




Levinson                    Standards Track                     [Page 7]
^L
RFC 2387                   Multipart/Related                 August 1998


   (a) the bodies of the MIME entities and the entity Content-* headers,

   (b) the parameters of the Multipart/Related Content-type header, and

   (c) the correspondence between each body's local file name, that
       body's header data, and, if present, the body part's content-ID.

6.2 Storing Multipart/Related Entities

   The Multipart/Related media type will be used for objects that have
   internal linkages between the body parts.  When the objects are
   stored the linkages may require processing by the application or its
   receiving agent.

6.3 Recursion

   MIME is a recursive structure.  Hence one must expect a
   Multipart/Related entity to contain other Multipart/Related entities.
   When a Multipart/Related entity is being processed for display or
   storage, any enclosed Multipart/Related entities shall be processed
   as though they were being stored.

6.4 Configuration Considerations

   It is suggested that MUAs that use configuration mechanisms, see
   [CFG] for an example, refer to Multipart/Related as Multi-
   part/Related/<type>, were <type> is the value of the "type"
   parameter.

7.  Security Considerations

   Security considerations relevant to Multipart/Related are identical
   to those of the underlying content-type.

8.  Acknowledgments

   This proposal is the result of conversations the author has had with
   many people.  In particular, Harald A. Alvestrand, James Clark,
   Charles Goldfarb, Gary Houston, Ned Freed, Ray Moody, and Don
   Stinchfield, provided both encouragement and invaluable help.  The
   author, however, take full responsibility for all errors contained in
   this document.









Levinson                    Standards Track                     [Page 8]
^L
RFC 2387                   Multipart/Related                 August 1998


9.  References

   [822]       Crocker, D., "Standard for the Format of ARPA Internet
               Text Messages", STD 11, RFC 822, August 1982.

   [CID]       Levinson, E., and J. Clark, "Message/External-Body
               Content-ID Access Type",  RFC 1873, December 1995,
               Levinson, E., "Message/External-Body Content-ID Access
               Type", Work in Progress.

   [CFG]       Borenstein, N., "A User Agent Configuration Mechanism For
               Multimedia Mail Format Information", RFC 1524, September
               1993.

   [DISP]      Troost, R., and S. Dorner, "Communicating Presentation
               Information in Internet Messages:  The Content-
               Disposition Header", RFC 1806, June 1995.

   [MIME]      Borenstein, N., and Freed, N., "Multipurpose Internet
               Mail Extensions (MIME) Part One: Format of Internet
               Message Bodies", RFC 2045, November 1996.

9.  Author's Address

   Edward Levinson
   47 Clive Street
   Metuchen, NJ  08840-1060
   USA

   Phone: +1 908 494 1606
   EMail: XIson@cnj.digex.com

10.  Changes from previous draft (RFC 2112)

   Corrected cid urls to conform to RFC 2111; the angle brackets were
   removed.















Levinson                    Standards Track                     [Page 9]
^L
RFC 2387                   Multipart/Related                 August 1998


11.  Full Copyright Statement

   Copyright (C) The Internet Society (1998).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
























Levinson                    Standards Track                    [Page 10]
^L