1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
|
Internet Engineering Task Force (IETF) Q. Xiong
Request for Comments: 9357 ZTE Corporation
Category: Standards Track February 2023
ISSN: 2070-1721
Label Switched Path (LSP) Object Flag Extension for Stateful PCE
Abstract
RFC 8231 describes a set of extensions to the Path Computation
Element Communication Protocol (PCEP) to enable stateful control of
MPLS-TE and GMPLS Label Switched Paths (LSPs) via PCEP. One of the
extensions is the LSP object, which includes a Flag field with a
length of 12 bits. However, all bits of the Flag field have already
been assigned.
This document defines a new LSP-EXTENDED-FLAG TLV for the LSP object
for an extended Flag field.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc9357.
Copyright Notice
Copyright (c) 2023 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Revised BSD License text as described in Section 4.e of the
Trust Legal Provisions and are provided without warranty as described
in the Revised BSD License.
Table of Contents
1. Introduction
2. Conventions Used in this Document
2.1. Terminology
2.2. Requirements Language
3. PCEP Extension
3.1. The LSP-EXTENDED-FLAG TLV
3.2. Processing
4. Advice for Specification of New Flags
5. Backward Compatibility
6. IANA Considerations
6.1. LSP Object
6.1.1. PCEP TLV Type Indicators
6.1.2. LSP Extended Flags Field
7. Management Considerations
8. Security Considerations
9. References
9.1. Normative References
9.2. Informative References
Appendix A. Working Group Discussion
Acknowledgements
Contributors
Author's Address
1. Introduction
[RFC5440] describes the Path Computation Element Communication
Protocol (PCEP), which is used between a PCE and a Path Computation
Client (PCC) (or other PCE) to enable computation of Multi-protocol
Label Switching for Traffic Engineering (MPLS-TE) Label Switched
Paths (LSPs).
PCEP Extensions for the Stateful PCE Model [RFC8231] describes a set
of extensions to PCEP to enable active control of MPLS-TE and
Generalized MPLS (GMPLS) tunnels. One of the extensions is the LSP
object, which contains a Flag field; bits in the Flag field are used
to indicate delegation, synchronization, removal, etc.
As defined in [RFC8231], the length of the Flag field is 12 bits, and
all of the bits have already been defined as shown in Table 1. This
document extends the Flag field of the LSP object for other use by
defining a new LSP-EXTENDED-FLAG TLV for an extended Flag field in
the LSP object (see Section 3.1).
+=====+======================+==================+
| Bit | Description | Reference |
+=====+======================+==================+
| 0 | PCE-allocation | [BIND-LABEL-SID] |
+-----+----------------------+------------------+
| 1 | ERO-compression | [RFC8623] |
+-----+----------------------+------------------+
| 2 | Fragmentation | [RFC8623] |
+-----+----------------------+------------------+
| 3 | P2MP | [RFC8623] |
+-----+----------------------+------------------+
| 4 | Create | [RFC8281] |
+-----+----------------------+------------------+
| 5-7 | Operational (3 bits) | [RFC8281] |
+-----+----------------------+------------------+
| 8 | Administrative | [RFC8281] |
+-----+----------------------+------------------+
| 9 | Remove | [RFC8281] |
+-----+----------------------+------------------+
| 10 | SYNC | [RFC8281] |
+-----+----------------------+------------------+
| 11 | Delegate | [RFC8281] |
+-----+----------------------+------------------+
Table 1: LSP Object Flag Field
2. Conventions Used in this Document
2.1. Terminology
The terminology is defined in [RFC5440] and [RFC8231].
2.2. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
3. PCEP Extension
The LSP object is defined in Section 7.3 of [RFC8231]. This document
defines a new LSP-EXTENDED-FLAG TLV for an extended Flag field in the
LSP object.
3.1. The LSP-EXTENDED-FLAG TLV
The format of the LSP-EXTENDED-FLAG TLV shown in Figure 1 follows the
format of all PCEP TLVs, as defined in [RFC5440].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type=64 | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
// LSP Extended Flags //
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 1: LSP-EXTENDED-FLAG TLV Format
Type (16 bits): 64
Length (16 bits): This indicates the length of the value portion in
bytes. It MUST be in multiples of 4 and greater than 0.
LSP Extended Flags: This contains an array of units of 32-bit flags
numbered from the most significant as bit zero, where each bit
represents one LSP flag (for operation, feature, or state). The
LSP Extended Flags field SHOULD use the minimal amount of space
needed to encode the flag bits. Currently, no bits are assigned.
Unassigned bits MUST be set to zero on transmission and MUST be
ignored on receipt.
As an example of usage of the LSP-EXTENDED-FLAG TLV, the E-flag is
requested for entropy label configuration, as proposed in
[PCEP-ENTROPY-LABEL].
3.2. Processing
The LSP Extended Flags field is an array of units of 32 flags that
are allocated starting from the most significant bit. The bits of
the LSP Extended Flags field will be assigned by future documents.
This document does not define any flags. Flags that an
implementation is not supporting MUST be set to zero on transmission.
Implementations that do not understand any particular flag MUST
ignore the flag.
Note that PCEP peers MUST handle varying lengths of the LSP-EXTENDED-
FLAG TLV.
If a PCEP speaker receives the LSP-EXTENDED-FLAG TLV of a length more
than it currently supports or understands, it MUST ignore the bits
beyond that length.
If a PCEP speaker receives the LSP-EXTENDED-FLAG TLV of a length less
than the one supported by the implementation, it MUST act as if the
bits beyond the length were not set.
4. Advice for Specification of New Flags
Following the model provided in Section 3.1 of [RFC8786], we provide
the following advice for new specifications that define additional
flags. Each such specification is expected to describe the
interaction between these new flags and any existing flags. In
particular, new specifications are expected to explain how to handle
the cases when both new and preexisting flags are set. They are also
expected to discuss any security implications of the additional flags
(if any) and their interactions with existing flags.
5. Backward Compatibility
The LSP-EXTENDED-FLAG TLV defined in this document does not introduce
any backward compatibility issues. An implementation that does not
understand or support the LSP-EXTENDED-FLAG TLV MUST ignore the TLV,
as per [RFC5440]. Future documents that define bits in the LSP-
EXTENDED-FLAG TLV are expected to also define the error handling
required for cases in which the LSP-EXTENDED-FLAG TLV is missing when
it MUST be present.
Further, any additional bits in the LSP-EXTENDED-FLAG TLV that are
not understood by an implementation MUST be ignored. It is expected
that future documents that define bits in the LSP-EXTENDED-FLAG TLV
will take that into consideration.
6. IANA Considerations
6.1. LSP Object
6.1.1. PCEP TLV Type Indicators
IANA has allocated the following TLV Type Indicator value within the
"PCEP TLV Type Indicators" registry of the "Path Computation Element
Protocol (PCEP) Numbers" registry:
+=======+===================+===========+
| Value | Description | Reference |
+=======+===================+===========+
| 64 | LSP-EXTENDED-FLAG | RFC 9357 |
+-------+-------------------+-----------+
Table 2
6.1.2. LSP Extended Flags Field
IANA has created the "LSP-EXTENDED-FLAG TLV Flag Field" registry
within the "Path Computation Element Protocol (PCEP) Numbers"
registry to manage the LSP Extended Flags field of the LSP-EXTENDED-
FLAG TLV. New values are assigned by Standards Action [RFC8126].
Each bit should be tracked with the following qualities:
* Bit number (counting from bit 0 as the most significant bit)
* Capability Description
* Reference
No values are currently defined. Bits 0-31 are initially marked as
"Unassigned". Bits with a higher ordinal than 31 will be added to
the registry in future documents if necessary.
7. Management Considerations
Implementations receiving set LSP Extended Flags that they do not
recognize MAY log this. That could be helpful for diagnosing
backward compatibility issues with future features that utilize those
flags.
8. Security Considerations
[RFC8231] sets out security considerations for PCEP when used for
communication with a stateful PCE. This document does not change
those considerations. For LSP object processing, see [RFC8231].
The flags for the LSP object and their associated security
considerations are specified in [RFC8231], [RFC8281], [RFC8623], and
[BIND-LABEL-SID].
This document provides for the future addition of flags in the LSP
object. Any future document that specifies new flags must also
discuss any associated security implications. No additional security
issues are raised in this document beyond those that exist in the
referenced documents. Note that [RFC8231] recommends that the
stateful PCEP extension be authenticated and encrypted using
Transport Layer Security (TLS) [RFC8253] [PCEPS-TLS1.3], as per the
recommendations and best current practices in [RFC9325]. Assuming
that the recommendation is followed, then the flags will be protected
by TLS.
9. References
9.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC5440] Vasseur, JP., Ed. and JL. Le Roux, Ed., "Path Computation
Element (PCE) Communication Protocol (PCEP)", RFC 5440,
DOI 10.17487/RFC5440, March 2009,
<https://www.rfc-editor.org/info/rfc5440>.
[RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for
Writing an IANA Considerations Section in RFCs", BCP 26,
RFC 8126, DOI 10.17487/RFC8126, June 2017,
<https://www.rfc-editor.org/info/rfc8126>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8231] Crabbe, E., Minei, I., Medved, J., and R. Varga, "Path
Computation Element Communication Protocol (PCEP)
Extensions for Stateful PCE", RFC 8231,
DOI 10.17487/RFC8231, September 2017,
<https://www.rfc-editor.org/info/rfc8231>.
9.2. Informative References
[BIND-LABEL-SID]
Sivabalan, S., Filsfils, C., Tantsura, J., Previdi, S.,
and C. Li, Ed., "Carrying Binding Label/Segment Identifier
(SID) in PCE-based Networks.", Work in Progress, Internet-
Draft, draft-ietf-pce-binding-label-sid-15, 20 March 2022,
<https://datatracker.ietf.org/doc/html/draft-ietf-pce-
binding-label-sid-15>.
[PCEP-ENTROPY-LABEL]
Xiong, Q., Peng, S., and F. Qin, "PCEP Extension for SR-
MPLS Entropy Label Position", Work in Progress, Internet-
Draft, draft-peng-pce-entropy-label-position-08, 29 August
2022, <https://datatracker.ietf.org/doc/html/draft-peng-
pce-entropy-label-position-08>.
[PCEPS-TLS1.3]
Dhody, D., Turner, S., and R. Housley, "PCEPS with TLS
1.3", Work in Progress, Internet-Draft, draft-dhody-pce-
pceps-tls13-01, 20 October 2022,
<https://datatracker.ietf.org/doc/html/draft-dhody-pce-
pceps-tls13-01>.
[RFC5088] Le Roux, JL., Ed., Vasseur, JP., Ed., Ikejiri, Y., and R.
Zhang, "OSPF Protocol Extensions for Path Computation
Element (PCE) Discovery", RFC 5088, DOI 10.17487/RFC5088,
January 2008, <https://www.rfc-editor.org/info/rfc5088>.
[RFC5089] Le Roux, JL., Ed., Vasseur, JP., Ed., Ikejiri, Y., and R.
Zhang, "IS-IS Protocol Extensions for Path Computation
Element (PCE) Discovery", RFC 5089, DOI 10.17487/RFC5089,
January 2008, <https://www.rfc-editor.org/info/rfc5089>.
[RFC8253] Lopez, D., Gonzalez de Dios, O., Wu, Q., and D. Dhody,
"PCEPS: Usage of TLS to Provide a Secure Transport for the
Path Computation Element Communication Protocol (PCEP)",
RFC 8253, DOI 10.17487/RFC8253, October 2017,
<https://www.rfc-editor.org/info/rfc8253>.
[RFC8281] Crabbe, E., Minei, I., Sivabalan, S., and R. Varga, "Path
Computation Element Communication Protocol (PCEP)
Extensions for PCE-Initiated LSP Setup in a Stateful PCE
Model", RFC 8281, DOI 10.17487/RFC8281, December 2017,
<https://www.rfc-editor.org/info/rfc8281>.
[RFC8623] Palle, U., Dhody, D., Tanaka, Y., and V. Beeram, "Stateful
Path Computation Element (PCE) Protocol Extensions for
Usage with Point-to-Multipoint TE Label Switched Paths
(LSPs)", RFC 8623, DOI 10.17487/RFC8623, June 2019,
<https://www.rfc-editor.org/info/rfc8623>.
[RFC8786] Farrel, A., "Updated Rules for Processing Stateful PCE
Request Parameters Flags", RFC 8786, DOI 10.17487/RFC8786,
May 2020, <https://www.rfc-editor.org/info/rfc8786>.
[RFC9325] Sheffer, Y., Saint-Andre, P., and T. Fossati,
"Recommendations for Secure Use of Transport Layer
Security (TLS) and Datagram Transport Layer Security
(DTLS)", BCP 195, RFC 9325, DOI 10.17487/RFC9325, November
2022, <https://www.rfc-editor.org/info/rfc9325>.
Appendix A. Working Group Discussion
The working group discussed the idea of a fixed length (with 32 bits)
for the LSP-EXTENDED-FLAG TLV. Though 32 bits would be sufficient
for quite a while, the use of variable length with a multiple of 32
bits allows for future extensibility where we would never run out of
flags and there would not be a need to define yet another TLV in the
future. Further, note that [RFC5088] and [RFC5089] use the same
approach for the PCE-CAP-FLAGS sub-TLV and are found to be useful.
Acknowledgements
The authors would like to thank Loa Andersson, Adrian Farrel, Aijun
Wang, and Gyan Mishra for their reviews, suggestions, and comments
for this document.
Contributors
The following people have substantially contributed to this document:
Dhruv Dhody
Huawei Technologies
Email: dhruv.ietf@gmail.com
Greg Mirsky
Ericsson
Email: gregimirsky@gmail.com
Author's Address
Quan Xiong
ZTE Corporation
No.6 Huashi Park Rd
Wuhan
Hubei, 430223
China
Email: xiong.quan@zte.com.cn
|
