summaryrefslogtreecommitdiff
path: root/doc/rfc/rfc2051.txt
diff options
context:
space:
mode:
authorThomas Voss <mail@thomasvoss.com> 2024-11-27 20:54:24 +0100
committerThomas Voss <mail@thomasvoss.com> 2024-11-27 20:54:24 +0100
commit4bfd864f10b68b71482b35c818559068ef8d5797 (patch)
treee3989f47a7994642eb325063d46e8f08ffa681dc /doc/rfc/rfc2051.txt
parentea76e11061bda059ae9f9ad130a9895cc85607db (diff)
doc: Add RFC documents
Diffstat (limited to 'doc/rfc/rfc2051.txt')
-rw-r--r--doc/rfc/rfc2051.txt6947
1 files changed, 6947 insertions, 0 deletions
diff --git a/doc/rfc/rfc2051.txt b/doc/rfc/rfc2051.txt
new file mode 100644
index 0000000..4142442
--- /dev/null
+++ b/doc/rfc/rfc2051.txt
@@ -0,0 +1,6947 @@
+
+
+
+
+
+
+Network Working Group M. Allen
+Request for Comments: 2051 Wall Data Inc.
+Category: Standards Track B. Clouston
+ Z. Kielczewski
+ Cisco Systems
+ W. Kwan
+ Jupiter Technology Inc.
+ B. Moore
+ IBM
+ October 1996
+
+ Definitions of Managed Objects for APPC using SMIv2
+
+Status of this Memo
+
+ This document specifies an Internet standards track protocol for the
+ Internet community, and requests discussion and suggestions for
+ improvements. Please refer to the current edition of the "Internet
+ Official Protocol Standards" (STD 1) for the standardization state
+ and status of this protocol. Distribution of this memo is unlimited.
+
+Table of Contents
+
+ 1. Introduction ........................................... 1
+ 2. The SNMP Network Management Framework .................. 1
+ 3. Overview ............................................... 2
+ 3.1 APPC MIB structure ...................................... 4
+ 4. Definitions ............................................ 10
+ 5. Acknowledgments ........................................ 123
+ 6. References ............................................. 123
+ 7. Security Considerations ................................ 123
+ 8. Authors' Addresses ..................................... 124
+
+1. Introduction
+
+ This memo defines a portion of the Management Information Base (MIB)
+ for use with network management protocols in the Internet community.
+ In particular, it defines objects for managing the configuration,
+ monitoring and controlling of network devices with APPC (Advanced
+ Program-to-Program Communications) capabilities. This memo
+ identifies managed objects for the SNA LU6.2 protocols.
+
+2. The SNMP Network Management Framework
+
+ The SNMP Network Management Framework consists of several components.
+ For the purpose of this specification, the applicable components of
+ the Framework are the SMI and related documents [2, 3, 4], which
+ define the mechanisms used for describing and naming objects for the
+
+
+
+Allen, et. al. Standards Track [Page 1]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ purpose of management.
+
+ The Framework permits new objects to be defined for the purpose of
+ experimentation and evaluation.
+
+3. Overview
+
+ This document identifies the proposed set of objects for managing the
+ configuration, monitoring and controlling devices with APPC
+ capabilities. APPC is the aspect of SNA which supports peer-to-peer
+ communication, and provides the interface for applications to
+ communicate. In this document, we will describe LU6.2 protocol-
+ specific managed objects.
+
+ This document describes both dependent and independent LU 6.2
+ protocols.
+
+ A dependent LU requires assistance from an SSCP in order to activate
+ an LU 6.2 session. An independent LU is able to activate an LU 6.2
+ session without assistance from the SSCP. If the agent supports
+ dependent LU 6.2 only, the SNA NAU MIB, RFC 1666 [7] is used instead
+ to represent those objects.
+
+ Local LUs and partner LUs connect with each other using sessions.
+ Multiple different sessions can be established between LUs with
+ characteristics defined by Modes. Session limits within a defined
+ Mode are negotiated between the local and partner LUs using a
+ protocol called CNOS (Change Number of Sessions).
+
+ Transaction Programs (TPs) are applications that use sessions to
+ communicate with each other. Multiple TPs can use the same session,
+ but not at the same time. A single usage of a session is called a
+ conversation. While a session can stay active for a long time, a
+ conversation can come up and down based on usage by the TPs.
+
+ Common Programming Interface - Communications (CPI-C) is a standard
+ API (Application Programming Interface) for APPC and OSI TP that is
+ used by TPs for accessing conversations. Although, many of the CPI-C
+ objects in this MIB are relevant to both APPC and OSI TP, the
+ intention is for managing APPC products only.
+
+ SNA names such as LU names, CP names, mode names, and COS names can
+ be padded with space characters in SNA formats. These space
+ characters are insignificant. For example, in a BIND RU a mode name
+ of "#INTER" with a length of 6 is identical to a mode name of "#INTER
+ " with a length of 8. However, in this MIB, insignificant space
+ characters are not included by the agent. Using the mode name from
+ the previous example, an agent would return a length of 6 and the
+
+
+
+Allen, et. al. Standards Track [Page 2]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ string "#INTER" with no space characters for appcModeAdminModeName,
+ regardless of how it appears in the BIND RU or in internal storage.
+ The lone exception is the all blank mode name, for which the agent
+ returns a length of 8 and the string " " (8 space characterss).
+
+ When an SNA name is functioning as a table index, an agent shall
+ treat trailing space characters as significant. If a Management
+ Station requests the objects from a row with index "#INTER ", the
+ agent does not match this to the row with index "#INTER". Since an
+ agent has no insignificant space characters in any of its table
+ indices, the only reason for a Management Station to include them
+ would be to start GetNext processing at a chosen point in a table.
+ For example, a GetNext request with index "M " would start
+ retrieval from a table at the first row with an 8-character index
+ beginning with M or a letter after M.
+
+ The SNA/APPC terms and overall architecture are documented in [1],
+ [5], and [6].
+
+ Highlights of the management functions supported by the APPC MIB
+ module include the following:
+
+ o Activating and deactivating statistics keeping and counting.
+
+ o Activating and deactivating tracing.
+
+ o Issuing CNOS processing verbs/commands for
+ INITIALIZE_SESSION_LIMIT, CHANGE_SESSION_LIMIT and
+ RESET_SESSION_LIMIT.
+
+ o Monitoring of parameters related to local LU, partner LU, modes,
+ TPs and CPI-C side information.
+
+ o Deactivating sessions.
+
+ o Monitoring of LU6.2-specific session operational parameters and
+ statistics, historical information about abnormally terminated
+ sessions, and information about APPC sessions that are
+ transported by APPN HPR.
+
+ o Monitoring of conversation operational parameters, and
+ historical information about abnormally terminated sessions.
+
+
+
+
+
+
+
+
+
+Allen, et. al. Standards Track [Page 3]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ This MIB module does not support:
+
+ o Modifying APPC defaults.
+
+ o Creating and deleting partner LUs, modes, TPs, and CPI-C side
+ information tables.
+
+ o Modifying parameters related to local LU, partner LU, modes,
+ TPs, and CPI-C side information.
+
+ o Activating or deactivating local LUs.
+
+ o Activating or deactivating partner LUs.
+
+ o Activating or deactivating conversations.
+
+ o Activating or deactivating Transaction Programs.
+
+ o Activating sessions.
+
+ o Traps
+
+3.1. APPC MIB Structure
+
+ The APPC MIB module contains six groups of objects:
+
+ o appcGlobal - objects related to global defaults and controls.
+ In addition, CNOS processing objects are also part of this group.
+
+ o appcLu - objects related to LU6.2-specific local and partner
+ LU, mode definition, monitoring and control.
+
+ o appcTp - objects related to transaction program definition,
+ monitoring and control.
+
+ o appcSession - objects related to LU6.2-specific session
+ monitoring.
+
+ o appcConversation - objects related to conversation monitoring.
+
+ o appcCPIC - objects related to related CPI-C side information.
+
+ These groups are described below in more detail.
+
+ The objects related to LU6.2 are generally organized into two types of
+ tables: the Admin and Oper tables.
+
+
+
+
+
+Allen, et. al. Standards Track [Page 4]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ The "Admin" table contains read-only objects which contain default or
+ expected configuration values. This MIB does not create or modify
+ configuration values. The "Oper" table contains objects which
+ provide current operational values, such as state values or
+ negotiated parameters, for dynamic or configured objects. Dynamic
+ objects are created by the APPC system using one of the templates
+ provided in the "Admin" table. Configured objects usually have a
+ one-to-one relationship between "Admin" and "Oper" entries. However,
+ some "Admin" values may have changed since the object became
+ operational, such that the "Oper" values may no longer be based on
+ the "Admin" values. The "Admin" entry could even be deleted. For
+ example, some implementations may allow a mode definition
+ (appcModeAdminEntry) to be deleted even while an active session was
+ using this mode (appcModeOperEntry still exists). Where appropriate,
+ the "Oper" table may include initial starting values for objects that
+ can be reconfigured while operational. How the "Admin" values are
+ changed or deleted is outside the scope of this MIB.
+
+3.1.1. appcGlobal group
+
+ The appcGlobal group consists of the following tables and objects:
+
+ 1) appcCntrlAdminGroup
+
+ This group of objects controls whether certain statistics and
+ counters (e.g., session counters and RSCV collection) should be
+ maintained by the Agent. In addition, the ability to activate and
+ deactivate tracing is also supported through objects in this group.
+ These objects are for Agent implementations that wish to provide this
+ level of operational control and are optional.
+
+ The objects in this group represent the desired state, with the
+ actual operational values in appcCntlOperGroup.
+
+ These objects can be generated initially, after startup of SNA
+ service, by the Agent which uses information from the Node
+ configuration file. Subsequent modifications of object values is
+ possible by a Management station. The modifications to these objects
+ can be saved in the Node configuration file for the next startup
+ (i.e., restart or next initialization) of SNA service, but the
+ mechanism for this function is not defined in this document.
+
+ 2) appcCntrlOperGroup
+
+ This group of objects monitors whether certain statistics and
+ counters (e.g., session counters and RSCV collection ) are maintained
+ by an Agent. In addition, the ability to monitor tracing activity is
+ also supported through objects in this group.
+
+
+
+Allen, et. al. Standards Track [Page 5]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ This table represents the actual operational state. These states can
+ be modified via objects in the appcCntrlAdminGroup.
+
+ 3) appcGlobalObjects
+
+ These objects describe global information such as APPC system start
+ time, the control point name, and default LU 6.2 configuration
+ values. The type of default configuration information includes mode
+ name, LU, and maximum logical record size.
+
+ 4) appcCnosControl
+
+ These objects allows for issuing of CNOS commands relative to a local
+ and partner LU pair and a Mode. They support the following CNOS
+ commands: INITIALIZE_SESSION_LIMIT, CHANGE_SESSION_LIMIT and
+ RESET_SESSION_LIMIT.
+
+ The objects in this group can be modified by a Management Station.
+
+ This group consists of objects that are relevant to the CNOS commands
+ parameters, which a Management Station needs to set. After setting
+ the parameters of a CNOS command, the Management Station will set the
+ control object (appcCnosCommand) to request the Agent to issue the
+ appropriate CNOS command.
+
+3.1.2. appcLu group
+
+ The appcLu group consists of the following tables:
+
+ 1) appcLluAdminTable
+
+ This table contains objects which describe specific LU6.2 local LU
+ configuration information. The type of information includes the
+ maximum number of sessions supported and compression parameters.
+
+ 2) appcLluOperTable
+
+ This table contains objects which describe specific LU6.2 local LU
+ operational information. The type of information includes the maximum
+ number of sessions supported, the number of sessions currently
+ active, and compression parameters.
+
+ 3) appcLuPairAdminTable
+
+ This table contains objects which describe local LU and partner LU
+ configuration information. The type of information includes security
+ information and whether parallel sessions are supported.
+
+
+
+
+Allen, et. al. Standards Track [Page 6]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ For those implementations that have partner LU definitions associated
+ with each local LU, multiple entries with the same
+ appcLuPairAdminParLuName could exist with different
+ appcLuPairAdminLocLuName. For those implementations in which partner
+ LU definitions apply to all local LUs, the appcLuPairAdminLocLuName
+ is set to '*ALL'.
+
+ 4) appcLuPairOperTable
+
+ This table contains objects which describe partner/local LU pair run-
+ time operational information. The type of information includes
+ security information and whether parallel sessions are supported.
+
+ Although the Admin (appcLuPairAdminTable) table entries could be
+ global to all local LUs in a Node, an entry in this Oper table is
+ always associated with one local LU.
+
+ A row in this table is created as soon as there is an active session
+ between the local and partner LU. Two entries are present when both
+ LUs in a pair are local.
+
+ 5) appcModeAdminTable
+
+ This table contains objects which describe Mode configuration
+ information. The type of information includes the mode name and
+ maximum session limit.
+
+ For those implementations that have Mode definitions associated with
+ each local and partner LU pair, multiple entries with the same
+ appcModeAdminModeName could exist with different
+ appcModeAdminLocLuName and appcModeAdminParLuName. For those
+ implementations in which Mode definitions apply to all local and/or
+ all partner LUs, the appcModeAdminLocLuName and/or
+ appcModeAdminParLuName are set to '*ALL'.
+
+ 6) appcModeOperTable
+
+ This table contains objects which describe Mode run-time operational
+ information for each local/partner LU pair. The type of information
+ includes the mode name and maximum session limit.
+
+ Although the Admin table entries could be global to all local and
+ partner LUs in a Node, the Oper table entries are always associated
+ with one local and partner LU pair.
+
+ A row in this table is created as soon as there is an active session
+ between local and partner LU for this Mode. Two entries are present
+ when both LUs in a pair are local.
+
+
+
+Allen, et. al. Standards Track [Page 7]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+3.1.3. appcTp group
+
+ The appcTp group consists of the following table:
+
+ 1) appcTpAdminTable
+
+ This table contains objects which describe transaction program (TP)
+ configuration information. The type of information includes the TP
+ name and TP operation, indicating how the TP will be started.
+
+ For those implementations that have TP definitions associated with
+ each local LU, multiple entries with the same appcTpAdminTpName could
+ exist with different appcTpAdminLocLuName. For those implementations
+ in which TP definition applies to all local LUs, it will have
+ appcTpAdminLocLuName set to '*ALL'.
+
+ There is no appcTpOperTable. Run-time information about TP tends to
+ be product-specific (e.g., process Id), and much of the information
+ can be derived from the conversation tables.
+
+3.1.4. appcSession group
+
+ The appcSession group consists of the following tables:
+
+ 1) appcActSessTable
+
+ This table contains objects which describe LU6.2 session information.
+ The type of information includes the PCID and the pacing counts.
+
+ 2) appcSessStatsTable
+
+ This table contains statistical information about LU 6.2 sessions.
+ The type of information includes counters of bytes and RUs sent and
+ received.
+
+ 3) appcHistSessTable
+
+ This table contains historical information about APPC sessions that
+ have terminated abnormally. The type of information includes the
+ unbind type and sense data.
+
+ 4) appcSessRtpTable
+
+ This table contains information about LU 6.2 sesions that are being
+ transported by High Performance Routing. The type of information
+ includes the NCEID and TCID.
+
+
+
+
+
+Allen, et. al. Standards Track [Page 8]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+3.1.5. appcConversation group
+
+ The appcConversation group consists of the following tables:
+
+ 1) appcActiveConvTable
+
+ This table contains objects which describe active conversation
+ information. The type of information includes the state and type. An
+ entry is created by an Agent when the conversation is started, and is
+ removed when the conversation ends.
+
+ 2) appcHistConvTable
+
+ This table contains objects which describe historical conversation
+ information about abnormally terminated conversations. The number of
+ entries and how long they are kept depends on the Agent
+ implementation. The type of information inclues the sense data and
+ log data.
+
+3.1.6. appcCPIC group
+
+ The appcCPIC group consists of the following tables:
+
+ 1) appcCpicAdminTable
+
+ This table contains objects which describe CPI-C side information.
+ The type of information includes the symbolic destination name and
+ partner LU name.
+
+ For those implementations that have CPI-C definition associated with
+ each local LU, multiple entries with the same
+ appcCpicAdminSymbDestName could exist with different
+ appcCpicAdminLocLuName. For those implementations in which CPI-C
+ definition applies to all local LUs, it will have
+ appcCpicAdminLocLuName set to '*ALL'.
+
+ 2) appcCpicOperTable
+
+ This table contains objects which describe CPI-C run-time operational
+ information. The type of information includes the symbolic
+ destination name and partner LU name.
+
+
+
+
+
+
+
+
+
+
+Allen, et. al. Standards Track [Page 9]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+4. Definitions
+
+APPC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ DisplayString, InstancePointer, TEXTUAL-CONVENTION, DateAndTime
+ FROM SNMPv2-TC
+
+ mib-2, Counter32, Gauge32, Integer32, TimeTicks,
+ OBJECT-TYPE, MODULE-IDENTITY
+ FROM SNMPv2-SMI
+
+ snanauMIB
+ FROM SNA-NAU-MIB
+
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF;
+
+appcMIB MODULE-IDENTITY
+ LAST-UPDATED "9512150000Z"
+ ORGANIZATION "IETF SNA NAU MIB Working Group"
+ CONTACT-INFO
+
+ "
+ Michael Allen
+ Wall Data Inc.
+ P.O.Box 1120
+ Duval, WA 98019, USA
+ Tel: 1 206 844 3505
+ E-mail: mallen@hq.walldata.com
+
+ Bob Clouston
+ Cisco Systems
+ 7025 Kit Creek Road
+ P.O. Box 14987
+ Research Triangle Park, NC 27709, USA
+ Tel: 1 919 472 2333
+ E-mail: clouston@cisco.com
+
+ Zbigniew Kielczewski
+ Cisco Systems
+ 3100 Smoketree Court
+ Raleigh, NC 27604, USA
+ Tel: 1 919 871 6326
+ E-mail: zbig@cisco.com
+
+
+
+
+
+
+Allen, et. al. Standards Track [Page 10]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ William Kwan
+ Jupiter Technology Inc.
+ 200 Prospect Street
+ Waltham, MA 02254, USA
+ Tel: 1 617 894 9300, x423
+ E-mail: billk@jti.com
+
+ Bob Moore
+ IBM Corporation
+ 800 Park Offices Drive
+ CNMA/664
+ P.O. Box 12195
+ Research Triangle Park, NC 27709, USA
+ Tel: 1 919 254 4436
+ E-mail: remoore@ralvm6.vnet.ibm.com
+ "
+ DESCRIPTION
+ "This is the MIB module for objects used to manage network
+ devices with APPC capabilities."
+
+::= { snanauMIB 3 }
+
+appcObjects OBJECT IDENTIFIER ::= { appcMIB 1 }
+ appcGlobal OBJECT IDENTIFIER ::= { appcObjects 1 }
+ appcLu OBJECT IDENTIFIER ::= { appcObjects 2 }
+ appcTp OBJECT IDENTIFIER ::= { appcObjects 3 }
+ appcSession OBJECT IDENTIFIER ::= { appcObjects 4 }
+ appcConversation OBJECT IDENTIFIER ::= { appcObjects 5 }
+ appcCPIC OBJECT IDENTIFIER ::= { appcObjects 6 }
+
+
+-- *********************************************************************
+-- Objects in this MIB are used to model an SNA device that supports
+-- APPC LUs.
+-- Following is the overall organization of the MIB.
+--
+-- 1. APPC Global Objects - global values, defaults,
+-- controls (including CNOS)
+-- 2. APPC Defined Lu Tables - Admin and Oper
+-- 3. APPC Defined LU Pair Tables - Admin and Oper
+-- 4. APPC Mode Tables - Admin and Oper
+-- 5. APPC TP Tables - Admin only
+-- 6. APPC Session Tables - Active, Stats, History, RTP
+-- 7. APPC Conversation Table - Active, History
+-- 8. APPC CPIC side info - Admin and Oper
+-- *********************************************************************
+
+-- *********************************************************************
+
+
+
+Allen, et. al. Standards Track [Page 11]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+-- Textual Convention
+
+-- ---------------------------------------------------------------------
+SnaSenseData ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "To facilitate their display by a Management Station, sense
+ data objects in the MIB are represented as DisplayStrings of
+ size 8. Eight '0' characters indicates that no sense data
+ identifying an SNA error condition is available."
+
+ SYNTAX DisplayString (SIZE (8))
+-- *********************************************************************
+-- APPC Control Objects
+-- ---------------------------------------------------------------------
+-- The following objects allow:
+-- * the collection of APPC Session information counters
+-- to be started and stopped
+-- * the collection of APPC Session RSCVs
+-- to be started and stopped
+-- * the collection of APPC tracing information to be started and
+-- stopped
+--
+-- These objects are for implementations that wish to provide
+-- this level of operational control. This group is
+-- conditionally mandatory in the conformance section of the MIB.
+--
+-- *********************************************************************
+
+-- *********************************************************************
+-- Control Admin
+-- These objects contain the desired states for the controls.
+-- The actual states are in the Oper objects.
+-- *********************************************************************
+appcCntrlAdminGroup OBJECT IDENTIFIER ::= { appcGlobal 1 }
+
+appcCntrlAdminStat OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the desired state of statistics collection:
+
+ notActive collection of counters is not active.
+ active collection of counters is active.
+
+
+
+Allen, et. al. Standards Track [Page 12]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ When this object is set to notActive, all of the entries are
+ removed from the appcSessStatsTable."
+
+ ::= { appcCntrlAdminGroup 1 }
+
+appcCntrlAdminRscv OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the desired state of RSCV information collection:
+ notActive collection of route selection control vectors
+ is not active.
+ active collection of route selection control vectors
+ is active."
+
+ ::= { appcCntrlAdminGroup 2 }
+
+appcCntrlAdminTrace OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the desired state of tracing:
+
+ notActive collection of tracing information is not active
+ active collection of tracing information is active"
+
+ ::= { appcCntrlAdminGroup 3 }
+
+appcCntrlAdminTraceParm OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the parameter to be used in conjunction with
+ activating tracing. The actual content is implementation
+ dependent."
+
+ ::= { appcCntrlAdminGroup 4 }
+
+-- *********************************************************************
+
+
+
+Allen, et. al. Standards Track [Page 13]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+-- Control Oper
+-- These objects contain the actual states of the controls.
+-- *********************************************************************
+appcCntrlOperGroup OBJECT IDENTIFIER ::= { appcGlobal 2 }
+
+appcCntrlOperStat OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current collection options in effect:
+
+ notActive collection of counters is not active.
+ active collection of counters is active.
+
+ Statistical entries are present in the appcSessStatsTable
+ only when the value of this object is 'active'."
+
+ ::= { appcCntrlOperGroup 1 }
+
+appcCntrlOperStatTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time since the appcCntrlOperStat object last changed.
+ This time is in hundreds of a second."
+
+ ::= { appcCntrlOperGroup 2 }
+
+appcCntrlOperRscv OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current collection options in effect:
+
+ notActive collection of route selection control vectors
+ is not active.
+ active collection of route selection control vectors
+ is active."
+
+
+
+
+Allen, et. al. Standards Track [Page 14]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcCntrlOperGroup 3 }
+
+appcCntrlOperRscvTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time since the appcCntrlOperRscv object last changed.
+ This time is in hundreds of a second."
+
+ ::= { appcCntrlOperGroup 4 }
+
+appcCntrlOperTrace OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current state of tracing:
+
+ notActive collection of tracing information is not active.
+ active collection of tracing information is active."
+
+ ::= { appcCntrlOperGroup 5 }
+
+appcCntrlOperTraceTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time since the appcCntrlOperTrace object last changed.
+ This time is in hundreds of a second."
+
+ ::= { appcCntrlOperGroup 6 }
+
+appcCntrlOperTraceParm OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the parameter used in conjunction with activating
+ tracing. The actual content is implementation dependent."
+
+ ::= { appcCntrlOperGroup 7 }
+
+-- ******************************************************************
+
+
+
+Allen, et. al. Standards Track [Page 15]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+--
+-- APPC global settings
+--
+-- ******************************************************************
+appcGlobalObjects OBJECT IDENTIFIER ::= { appcGlobal 3 }
+
+appcUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time, in hundredths of a second, since the
+ APPC portion of the system was last reinitialized."
+
+ ::= { appcGlobalObjects 1 }
+
+appcDefaultModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the mode name to be used under the following
+ conditions:
+
+ When an incoming BIND request contains a mode name not
+ defined at the local node. The parameters defined for
+ this mode are used for the inbound implicit mode
+ capability.
+
+ When an APPC program issues an [MC_]ALLOCATE,
+ [MC_]SEND_CONVERSATION, or CNOS verb, or when a CPI-C
+ program issues an Allocate (CMALLC) call,
+ specifying a mode name not defined at the local node. The
+ parameters defined for this mode are used for the outbound
+ implicit mode capability.
+
+ This mode name must match a defined entry in the
+ appcModeAdminTable."
+
+ ::= { appcGlobalObjects 2 }
+
+appcDefaultLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the local LU that is to serve as the
+ default LU. This is the default LU to which are routed inbound
+
+
+
+Allen, et. al. Standards Track [Page 16]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ BIND requests that exclude the secondary LU name. This field
+ is from 1 to 17 characters in length, including a period (.)
+ which separates the NetId from the NAU name if the NetId is
+ present. This local LU name must match a defined entry in the
+ appcLluAdminTable."
+
+ ::= { appcGlobalObjects 3 }
+
+appcDefaultImplInbndPlu OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether or not inbound implicit partner LU support
+ is enabled. The following values are defined:
+
+ no - Specifies that inbound implicit partner LU support
+ is disabled, which means that an incoming bind that
+ specifies a partner LU that is not defined at the
+ local node will be rejected.
+
+ yes - Specifies that inbound implicit partner LU support
+ is enabled, which provides the capability to accept
+ an incoming BIND request that contains a partner LU
+ name that is not defined at the local node."
+
+ ::= { appcGlobalObjects 4 }
+
+appcDefaultMaxMcLlSndSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum size of a logical record to be used for
+ a mapped conversation when sending data to either the inbound
+ or outbound implicit partner LU. This size is the maximum
+ number of bytes in a single logical record, as indicated in the
+ LL field of the record. The default value is 32767.
+
+ Note that this object does not limit the maximum size that an
+ application program can supply on the Send Data call for a
+ mapped conversation."
+
+ ::= { appcGlobalObjects 5 }
+
+
+
+
+Allen, et. al. Standards Track [Page 17]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcDefaultFileSpec OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..80))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local file specification that is to be searched by the
+ APPC attach manager when no DEFINE_TP verb has been issued
+ for the TP name received on an incoming attach. In this
+ case, the attach manager will attempt to start a program
+ whose file name is the same as the incoming TP name. If
+ found, the program is loaded. If not found, the attach is
+ rejected.
+
+ The value '*' indicates that the normal search path for
+ executable programs is to be used for locating an undefined
+ transaction program.
+
+ A null string indicates that there is no default file
+ specification for undefined transaction programs."
+
+ ::= { appcGlobalObjects 6 }
+
+appcDefaultTpOperation OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ queuedOperatorStarted(2),
+ queuedOperatorPreloaded(3),
+ queuedAmStarted(4),
+ nonqueuedAmStarted(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies how the program will be started.
+
+ other - Specifies that the default TP operation is none of
+ the methods specified below. It may be a
+ product-specific method.
+
+ queuedOperatorStarted - Specifies that one version of the
+ program will be run at a time. If an incoming
+ attach arrives and the program has not been started
+ yet, APPC will issue a message to the operator to
+ start the specified program. Subsequent attaches
+ that arrive while the program is active will be
+ queued.
+
+ queuedOperatorPreloaded - Specifies that one version
+
+
+
+Allen, et. al. Standards Track [Page 18]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ of the program will be run at a time. If an
+ incoming attach arrives and the program has not
+ been started yet, the Attach will be rejected. The
+ APPC attach manager determines that a TP has
+ started upon reception of an APPC RECEIVE_ALLOCATE
+ verb, or a CPI-C Accept_Conversation (CMACCP) or
+ Specify_Local_TP_Name (CMSLTP) call. No message is
+ sent to the operator. Subsequent attaches that
+ arrive while the program is active are queued.
+
+ queuedAmStarted - Specifies that one version of the
+ program will be run at a time and will be started
+ by the APPC attach manager. Subsequent attaches
+ that arrive while the program is active will be
+ queued.
+
+ nonqueuedAmStarted - Specifies that multiple copies of
+ the program will be run at a time and will be
+ started by the APPC attach manager. "
+
+ ::= { appcGlobalObjects 7 }
+
+appcDefaultTpConvSecRqd OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether or not conversation security will be used
+ for default TPs.
+
+ no - Specifies that the incoming attach does not have to
+ contain security information.
+ yes - Specifies that the incoming attach must contain
+ valid authentication information (e.g., user ID and
+ password)."
+
+ ::= { appcGlobalObjects 8 }
+
+appcLocalCpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the local control point. This field is
+ from 0 to 17 characters in length, including a period (.) which
+
+
+
+Allen, et. al. Standards Track [Page 19]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ separates the NetId from the NAU name if the NetId is present.
+ A null string indicates that the value is unknown."
+
+ ::= { appcGlobalObjects 9 }
+
+appcActiveSessions OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the total number of active APPC sessions supported
+ by this implementation. Sessions for which both LUs are local
+ are counted twice."
+
+ ::= { appcGlobalObjects 10 }
+
+appcActiveHprSessions OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the total number of active HPR APPC sessions."
+
+ ::= { appcGlobalObjects 11 }
+
+-- ******************************************************************
+-- APPC CNOS control
+--
+-- This group contains objects for issuing APPC Change-Number-of-Session
+-- (CNOS) commands to a specific mode. Specifically, the commands
+-- supported are:
+-- INITIALIZE_SESSION_LIMIT
+-- CHANGE_SESSION_LIMIT
+-- RESET_SESSION_LIMIT
+--
+--
+-- ******************************************************************
+appcCnosControl OBJECT IDENTIFIER ::= { appcGlobal 4 }
+
+
+appcCnosCommand OBJECT-TYPE
+ SYNTAX INTEGER {
+ initSesslimit(1),
+ changeSesslimit(2),
+ resetSesslimit(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+
+
+
+Allen, et. al. Standards Track [Page 20]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ DESCRIPTION
+ "Specifies the CNOS command or verb to issue. First set the
+ values of the particular CNOS parameter objects (from the range
+ { appcCnosControl 2 } through { appcCnosControl 8 }) that apply
+ to the CNOS command to be executed, set the three CNOS target
+ objects ({ appcCnosControl 9 } through { appcCnosControl 11 }),
+ then set this object to the command to be executed.
+
+ Here is the list of parameter objects that must be set for each
+ of the CNOS commands:
+
+ INIT_SESSION_LIMIT -
+ appcCnosMaxSessLimit
+ appcCnosMinCwinLimit
+ appcCnosMinClosLimit
+ appcCnosTargetLocLuName
+ appcCnosTargetParLuName
+ appcCnosTargetModeName
+
+ CHANGE_SESSION_LIMIT -
+ appcCnosMaxSessLimit
+ appcCnosMinCwinLimit
+ appcCnosMinClosLimit
+ appcCnosResponsible
+ appcCnosTargetLocLuName
+ appcCnosTargetParLuName
+ appcCnosTargetModeName
+
+ RESET_SESSION_LIMIT -
+ appcCnosResponsible
+ appcCnosDrainPart
+ appcCnosForce
+ appcCnosTargetLocLuName
+ appcCnosTargetParLuName
+ appcCnosTargetModeName
+ "
+
+ ::= { appcCnosControl 1 }
+
+appcCnosMaxSessLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum value that the local LU is to use,
+ during CNOS processing, for the session limit. The local LU,
+ as a target LU, will negotiate a higher session limit it
+ receives in the CNOS request down to this maximum value. The
+
+
+
+Allen, et. al. Standards Track [Page 21]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ local LU, as a source LU, will restrict the session limit it
+ sends in a CNOS request to a value less than or equal to this
+ maximum value.
+
+ If set (i.e., greater than 0), this overrides the maximum
+ session limit defined in the appcModeAdminTable.
+
+ This parameter should be set to the desired value before
+ setting the command (appcCnosCommand).
+
+ This parameter applies to the INITIALIZE_SESSION_LIMIT and
+ CHANGE_SESSION_LIMIT verbs."
+
+ DEFVAL { 0 }
+
+ ::= { appcCnosControl 2 }
+
+appcCnosMinCwinLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the default minimum contention winner sessions
+ limit.
+
+ This parameter should be set to the desired value before
+ setting the command (appcCnosCommand).
+
+ This parameter applies to the INITIALIZE_SESSION_LIMIT and
+ CHANGE_SESSION_LIMIT verbs."
+
+ DEFVAL { 0 }
+
+ ::= { appcCnosControl 3 }
+
+appcCnosMinClosLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the default minimum contention loser sessions limit.
+
+ This parameter should be set to the desired value before
+ setting the command (appcCnosCommand).
+
+ This parameter applies to the INITIALIZE_SESSION_LIMIT and
+ CHANGE_SESSION_LIMIT verbs."
+
+
+
+
+Allen, et. al. Standards Track [Page 22]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ DEFVAL { 0 }
+
+ ::= { appcCnosControl 4 }
+
+appcCnosDrainSelf OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the local LU is draining its conversations
+ for this mode. When a mode session limit is reset (via a CNOS
+ RESET_SESSION_LIMIT request), the local LU could be set to
+ process all queued conversations before deactivating all of the
+ sessions (using the SNA Bracket Initiation Stopped or BIS
+ protocol).
+
+ This parameter should be set to the desired value before
+ setting the command (appcCnosCommand).
+
+ This parameter applies only to the RESET_SESSION_LIMIT verb."
+
+ DEFVAL { no }
+
+ ::= { appcCnosControl 5 }
+
+appcCnosDrainPart OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the partner LU is draining its conversations
+ for this mode. When a mode session limit is reset (via a CNOS
+ RESET_SESSION_LIMIT request), the partner LU could be set to
+ process all queued conversations before deactivating all of the
+ sessions (using the SNA Bracket Initiation Stop or BIS
+ protocol).
+
+ This parameter should be set to the desired value before
+ setting the command (appcCnosCommand).
+
+ This parameter applies only to the RESET_SESSION_LIMIT verb."
+
+
+
+
+Allen, et. al. Standards Track [Page 23]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ DEFVAL { yes }
+
+ ::= { appcCnosControl 6 }
+
+appcCnosResponsible OBJECT-TYPE
+ SYNTAX INTEGER {
+ source(1),
+ target(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies which LU is responsible for selecting and
+ deactivating sessions as a result of a change that decreases
+ the session limit or the maximum number of contention winner
+ sessions for the source or target LU. If no session need to be
+ deactivated, this parameter is ignored.
+
+ source - specifies that the source (local) LU is
+ responsible. The target (partner) LU
+ cannot negotiate this value.
+ target - specifies that the target (partner) LU is
+ responsible. The target LU can negotiate
+ this value to source.
+
+ This parameter should be set to the desired value before
+ setting the command (appcCnosCommand).
+
+ This parameter applies to the RESET_SESSION_LIMIT and
+ CHANGE_SESSION_LIMIT verbs."
+
+ DEFVAL { source }
+
+ ::= { appcCnosControl 7 }
+
+appcCnosForce OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the local LU should force the resetting of
+ the session limit when certain error conditions occur that
+ prevent the successful exchange of CNOS request and reply.
+
+ This parameter should be set to the desired value before
+
+
+
+Allen, et. al. Standards Track [Page 24]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ setting the command (appcCnosCommand).
+
+ This parameter applies only to the RESET_SESSION_LIMIT verb."
+
+ DEFVAL { no }
+
+ ::= { appcCnosControl 8 }
+
+appcCnosTargetLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU to which the CNOS command is
+ to be applied. This field is from 1 to 17 characters in
+ length, including a period (.) which separates the
+ NetId from the NAU name if the NetId is present.
+
+ This object should be set to the desired value before setting
+ the command (appcCnosCommand).
+
+ This parameter applies to all CNOS verbs."
+
+ ::= { appcCnosControl 9 }
+
+appcCnosTargetParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU to which the CNOS command is
+ to be applied. This field is from 1 to 17 characters in
+ length, including a period (.) which separates the
+ NetId from the NAU name if the NetId is present.
+
+ This object should be set to the desired value before setting
+ the command (appcCnosCommand).
+
+ This parameter applies to all CNOS verbs."
+
+ ::= { appcCnosControl 10 }
+
+appcCnosTargetModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the mode name to which the CNOS command is to be
+
+
+
+Allen, et. al. Standards Track [Page 25]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ applied.
+
+ This object should be set to the desired value before setting
+ the command (appcCnosCommand).
+
+ This parameter applies to all CNOS verbs."
+
+ ::= { appcCnosControl 11 }
+
+
+-- *********************************************************************
+-- APPC LU information
+-- ---------------------------------------------------------------------
+-- Local LU
+-- Partner LU
+-- Mode
+-- *********************************************************************
+
+-- *********************************************************************
+-- APPC Local LU
+--
+-- The entries in the following tables provide information for
+-- independent and dependent LU 6.2.
+--
+-- *********************************************************************
+
+-- *********************************************************************
+-- APPC Local LU Admin Table
+-- Objects in this table contain default or expected configuration
+-- values for local 6.2 LUs.
+-- *********************************************************************
+
+appcLluAdminTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcLluAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "APPC Local LU Admin Table."
+
+ ::= { appcLu 1 }
+
+appcLluAdminEntry OBJECT-TYPE
+ SYNTAX AppcLluAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about local APPC LUs. "
+
+
+
+
+Allen, et. al. Standards Track [Page 26]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ INDEX { appcLluAdminName }
+
+ ::= { appcLluAdminTable 1 }
+
+AppcLluAdminEntry ::= SEQUENCE {
+ appcLluAdminName DisplayString,
+ appcLluAdminDepType INTEGER,
+ appcLluAdminLocalAddress OCTET STRING,
+ appcLluAdminSessLimit Integer32,
+ appcLluAdminBindRspMayQ INTEGER,
+ appcLluAdminCompression INTEGER,
+ appcLluAdminInBoundCompLevel INTEGER,
+ appcLluAdminOutBoundCompLevel INTEGER,
+ appcLluAdminCompRleBeforeLZ INTEGER,
+ appcLluAdminAlias DisplayString
+ }
+
+appcLluAdminName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the local LU. This field is from 1 to
+ 17 characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present."
+
+ ::= { appcLluAdminEntry 1 }
+
+appcLluAdminDepType OBJECT-TYPE
+ SYNTAX INTEGER {
+ dependent(1),
+ independent(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value identifies whether the LU is dependent or
+ independent."
+
+ ::= { appcLluAdminEntry 2 }
+
+appcLluAdminLocalAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local address for this LU is a byte with a value ranging
+ from 0 to 254. For dependent LUs, this value ranges from 1 to
+
+
+
+Allen, et. al. Standards Track [Page 27]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ 254; for independent LUs this value is always 0."
+
+ ::= { appcLluAdminEntry 3 }
+
+appcLluAdminSessLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of sessions supported by this LU."
+
+ ::= { appcLluAdminEntry 4 }
+
+appcLluAdminBindRspMayQ OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether or not the local LU, as the sender of a BIND
+ request, allows a partner partner LU to delay sending the BIND
+ response if the partner LU cannot process the BIND request
+ immediately."
+
+ ::= { appcLluAdminEntry 5 }
+
+appcLluAdminCompression OBJECT-TYPE
+ SYNTAX INTEGER {
+ prohibited(1),
+ required(2),
+ negotiable(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether compression is supported. The local LU uses
+ this value for negotiation during session activation
+ (SNA BIND).
+
+ prohibited - specifies that no compression is to be used.
+ required - specifies that compression is required.
+ negotiable - specifies that the usage of compression
+ is to be negotiated between the LUs. The
+ level of compression is also negotiated."
+
+ ::= { appcLluAdminEntry 6 }
+
+
+
+Allen, et. al. Standards Track [Page 28]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcLluAdminInBoundCompLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ rle(2),
+ lz9(3),
+ lz10(4),
+ lz12(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum level of compression supported for
+ inbound data. The local LU uses this value in conjunction with
+ appcLluAdminCompression for negotiation during session
+ activation (SNA BIND).
+ none - specifies that no compression is to be used.
+ rle - specifies run-length encoding compression
+ in which a 1 or 2 byte sequence substitution is
+ used for each repeated run of the same character.
+ lz9 - specifies Lempel-Ziv-like compression in which
+ 9 bit codes are used to substitute repeated
+ substrings in the data stream. These codes are
+ indices that refer to entries in a common
+ dictionary generated adaptively at both sender and
+ receiver as the data flows and compression occurs.
+ The larger number bits used for the code, the more
+ storage space is required for the dictionary, but
+ the larger the compression ratio.
+ lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
+ lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
+
+ ::= { appcLluAdminEntry 7 }
+
+appcLluAdminOutBoundCompLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ rle(2),
+ lz9(3),
+ lz10(4),
+ lz12(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum level of compression supported for
+ outbound data. The local LU uses this value in conjunction
+ with appcLluAdminCompression for negotiation during session
+ activation (SNA BIND).
+
+
+
+Allen, et. al. Standards Track [Page 29]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ none - specifies that no compression is to be used.
+ rle - specifies run-length encoding compression
+ in which a 1 or 2 byte sequence substitution is
+ used for each repeated run of the same character.
+ lz9 - specifies Lempel-Ziv-like compression in which
+ 9 bit codes are used to substitute repeated
+ substrings in the data stream. These codes are
+ indices that refer to entries in a common
+ dictionary generated adaptively at both sender and
+ receiver as the data flows and compression occurs.
+ The larger of number bits used for the code, the
+ more storage space is required for the dictionary,
+ but the larger the compression ratio.
+ lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
+ lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
+
+ ::= { appcLluAdminEntry 8 }
+
+appcLluAdminCompRleBeforeLZ OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether run-length encoding is to be applied to the
+ data before applying Lempel-Ziv-like compression. The local LU
+ uses this value for negotiation during session activation (SNA
+ BIND). This parameter is only supported if LZ compression is
+ used."
+
+ ::= { appcLluAdminEntry 9 }
+
+appcLluAdminAlias OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A local alias for the local LU. If not known or
+ not applicable, this object contains a zero-length
+ string."
+
+ ::= { appcLluAdminEntry 10 }
+
+
+-- *********************************************************************
+-- APPC Local LU Oper Table
+
+
+
+Allen, et. al. Standards Track [Page 30]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+-- Objects in this table contain current operational values, such
+-- as state values or negotiated parameters, for local 6.2 LUs.
+-- *********************************************************************
+
+appcLluOperTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcLluOperEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "APPC Local LU Operational Table."
+ ::= { appcLu 2 }
+
+appcLluOperEntry OBJECT-TYPE
+ SYNTAX AppcLluOperEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about local APPC LUs."
+
+ INDEX { appcLluOperName }
+
+ ::= { appcLluOperTable 1 }
+
+AppcLluOperEntry ::= SEQUENCE {
+ appcLluOperName DisplayString,
+ appcLluOperDepType INTEGER,
+ appcLluOperLocalAddress OCTET STRING,
+ appcLluOperSessLimit Integer32,
+ appcLluOperBindRspMayQ INTEGER,
+ appcLluOperCompression INTEGER,
+ appcLluOperInBoundCompLevel INTEGER,
+ appcLluOperOutBoundCompLevel INTEGER,
+ appcLluOperCompRleBeforeLZ INTEGER,
+ appcLluOperAlias DisplayString,
+ appcLluOperActiveSessions Gauge32
+ }
+
+appcLluOperName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the local LU. This field is from 1 to
+ 17 characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present."
+
+ ::= { appcLluOperEntry 1 }
+
+
+
+
+Allen, et. al. Standards Track [Page 31]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcLluOperDepType OBJECT-TYPE
+ SYNTAX INTEGER {
+ dependent(1),
+ independent(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value identifies whether the LU is dependent or
+ independent."
+
+ ::= { appcLluOperEntry 2 }
+
+appcLluOperLocalAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local address for this LU is a byte with a value ranging
+ from 0 to 254. For dependent LUs, this value ranges from 1 to
+ 254; for independent LUs this value is always 0."
+
+ ::= { appcLluOperEntry 3 }
+
+appcLluOperSessLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of sessions supported by this LU."
+
+ ::= { appcLluOperEntry 4 }
+
+appcLluOperBindRspMayQ OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether or not the local LU, as the sender of a BIND
+ request, allows a partner LU to delay sending the BIND
+ response if the partner LU cannot process the BIND request
+ immediately."
+
+ ::= { appcLluOperEntry 5 }
+
+
+
+
+Allen, et. al. Standards Track [Page 32]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcLluOperCompression OBJECT-TYPE
+ SYNTAX INTEGER {
+ prohibited(1),
+ required(2),
+ negotiable(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether compression is supported. The local LU uses
+ this value for negotiation during session activation (SNA
+ BIND).
+
+ prohibited - specifies that no compression is to be used.
+ required - specifies that compression is required.
+ negotiable - specifies that the usage of compression
+ is to be negotiated between the LUs. The
+ level of compression is also negotiated."
+
+ ::= { appcLluOperEntry 6 }
+
+appcLluOperInBoundCompLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ rle(2),
+ lz9(3),
+ lz10(4),
+ lz12(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum level of compression supported for
+ inbound data. The local LU uses this value in conjunction with
+ appcLluOperCompression for negotiation during session
+ activation (SNA BIND).
+
+ none - specifies that no compression is to be used.
+ rle - specifies run-length encoding compression
+ in which a 1 or 2 byte sequence substitution is
+ used for each repeated run of the same character.
+ lz9 - specifies Lempel-Ziv-like compression in which
+ 9 bit codes are used to substitute repeated
+ substrings in the data stream. These codes are
+ indices that refer to entries in a common
+ dictionary generated adaptively at both sender and
+ receiver as the data flows and compression occurs.
+ The larger of number bits used for the code, the
+
+
+
+Allen, et. al. Standards Track [Page 33]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ more storage space is required for the dictionary,
+ but the larger the compression ratio.
+ lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
+ lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
+ ::= { appcLluOperEntry 7 }
+
+appcLluOperOutBoundCompLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ rle(2),
+ lz9(3),
+ lz10(4),
+ lz12(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum level of compression supported for
+ outbound data. The local LU uses this value in conjunction
+ with appcLluAdminCompression for negotiation during session
+ activation (SNA BIND).
+
+ none - specifies that no compression is to be used.
+ rle - specifies run-length encoding compression
+ in which a 1 or 2 byte sequence substitution is
+ used for each repeated run of the same character.
+ lz9 - specifies Lempel-Ziv-like compression in which
+ 9 bit codes are used to substitute repeated
+ substrings in the data stream. These codes are
+ indices that refer to entries in a common
+ dictionary generated adaptively at both sender and
+ receiver as the data flows and compression occurs.
+ The larger of number bits used for the code, the
+ more storage space is required for the dictionary,
+ but the larger the compression ratio.
+ lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
+ lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
+
+ ::= { appcLluOperEntry 8 }
+
+appcLluOperCompRleBeforeLZ OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Allen, et. al. Standards Track [Page 34]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ "Specifies whether run-length encoding is to be applied to the
+ data before applying Lempel-Ziv-like compression. The local LU
+ uses this value for negotiation during session activation (SNA
+ BIND). This parameter is only supported if LZ compression is
+ used."
+
+ ::= { appcLluOperEntry 9 }
+
+appcLluOperAlias OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A local alias for the local LU. If not known or
+ not applicable, this object contains a zero-length
+ string."
+
+ ::= { appcLluOperEntry 10 }
+
+appcLluOperActiveSessions OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the total number of active APPC sessions for this
+ LU."
+
+ ::= { appcLluOperEntry 11 }
+
+-- *********************************************************************
+-- APPC LU Pair Admin Table
+-- Objects in this table contain default or expected configuration
+-- values for 6.2 LU pairs. An LU pair consists of a local LU and
+-- a partner LU, which may or may not be local.
+-- *********************************************************************
+appcLuPairAdminTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcLuPairAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "APPC Partner LU administrative Table"
+
+ ::= { appcLu 3 }
+
+appcLuPairAdminEntry OBJECT-TYPE
+ SYNTAX AppcLuPairAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+
+
+Allen, et. al. Standards Track [Page 35]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ DESCRIPTION
+ "Entry of APPC Partner LU Information Table.
+ It is indexed by the local and partner LU Names."
+
+ INDEX { appcLuPairAdminLocLuName,
+ appcLuPairAdminParLuName }
+
+ ::= { appcLuPairAdminTable 1 }
+
+AppcLuPairAdminEntry ::= SEQUENCE {
+
+ appcLuPairAdminLocLuName DisplayString,
+ appcLuPairAdminParLuName DisplayString,
+ appcLuPairAdminParLuAlias DisplayString,
+ appcLuPairAdminSessLimit Integer32,
+ appcLuPairAdminSessSec INTEGER,
+ appcLuPairAdminSecAccept INTEGER,
+ appcLuPairAdminLinkObjId InstancePointer,
+ appcLuPairAdminParaSessSup INTEGER
+
+ }
+
+appcLuPairAdminLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU to which this partner LU
+ definition applies. This field is from 1 to 17 characters in
+ length, including a period (.) which separates the
+ NetId from the NAU name if the NetId is present.
+
+ The reserved value '*ALL' indicates that the partner LU
+ definition applies to all local LUs, and not just to a single
+ local LU."
+
+ ::= { appcLuPairAdminEntry 1 }
+
+appcLuPairAdminParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU.
+ This field is from 1 to 17 characters in
+ length, including a period (.) which separates the
+ NetId from the NAU name if the NetId is present."
+
+
+
+
+Allen, et. al. Standards Track [Page 36]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcLuPairAdminEntry 2 }
+
+appcLuPairAdminParLuAlias OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A local alias for the partner LU. If not known or
+ not applicable, this object contains a zero-length
+ string."
+
+ ::= { appcLuPairAdminEntry 3 }
+
+appcLuPairAdminSessLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of sessions supported by this partner LU."
+
+ ::= { appcLuPairAdminEntry 4 }
+
+appcLuPairAdminSessSec OBJECT-TYPE
+ SYNTAX INTEGER {
+ required(1),
+ accepted(2),
+ notAllowed(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the type of session-level security information that
+ a local LU will accept on BIND requests it receives from the
+ partner LU.
+
+ required - Specifies that the BIND request must carry
+ session level verification information that
+ will be verified upon receipt.
+ accepted - Specifies that the BIND request may carry
+ session level verification information that
+ will be verified upon receipt.
+ notAllowed - Specifies that the BIND request must not carry
+ session level verification information."
+ ::= { appcLuPairAdminEntry 5 }
+
+
+appcLuPairAdminSecAccept OBJECT-TYPE
+ SYNTAX INTEGER {
+
+
+
+Allen, et. al. Standards Track [Page 37]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ none(1),
+ conversation(2),
+ alreadyVerified(3),
+ persistentVerification(4),
+ aVandpV(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies support for different levels of access security
+ information in ATTACH requests received from this partner LU.
+
+ Possible values are:
+
+ none - No access security information will be
+ accepted on allocation requests (ATTACH) from
+ this LU.
+ conversation
+ - Allocation requests will not be accepted that
+ include already verified or persistent
+ verification indicators. Accept
+ conversation-level access security
+ information, which must include both a user
+ Id and password, and may also include a
+ profile.
+ alreadyVerified
+ - Allocation requests will be accepted that
+ include already verified indicators.
+ Persistent verification indicators will not
+ be accepted.
+ persistentVerification
+ - Allocation requests will be accepted that
+ include persistent verification indicators.
+ Already verified indicators will not be
+ accepted.
+ aVandpV - Allocation requests will be accepted that
+ include already verified or persistent
+ verification indicators."
+
+ ::= { appcLuPairAdminEntry 6 }
+
+appcLuPairAdminLinkObjId OBJECT-TYPE
+ SYNTAX InstancePointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the link associated with this partner LU. This
+ value points to the row in the table containing information on
+
+
+
+Allen, et. al. Standards Track [Page 38]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ the link instance. (e.g., the sdlcLSAdminTable of the SNA DLC
+ MIB module). This object may be NULL if the link is not
+ specified or if a link is not applicable (as for APPN-level
+ nodes)."
+
+ ::= { appcLuPairAdminEntry 7 }
+
+appcLuPairAdminParaSessSup OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Defined Parallel Sessions Supported.
+
+ Indicates whether or not multiple sessions between the partner
+ LU and its associated local LU are permitted. Parallel session
+ support also indicates that Change Number of Sessions (CNOS)
+ will be used to negotiate session limits between the LUs."
+
+ ::= { appcLuPairAdminEntry 8 }
+
+
+-- *********************************************************************
+-- APPC LU Pair Oper Table
+-- Objects in this table contain current operational values, such
+-- as state values or negotiated parameters, for 6.2 LU pairs.
+-- *********************************************************************
+
+appcLuPairOperTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcLuPairOperEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table of active partner/local LU pairs. Two entries are
+ present in the table when both LUs in a pair are local."
+ ::= { appcLu 4 }
+
+appcLuPairOperEntry OBJECT-TYPE
+ SYNTAX AppcLuPairOperEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry representing one partner/local LU pair."
+
+ INDEX { appcLuPairOperLocLuName,
+
+
+
+Allen, et. al. Standards Track [Page 39]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ appcLuPairOperParLuName }
+
+ ::= { appcLuPairOperTable 1 }
+
+AppcLuPairOperEntry ::= SEQUENCE {
+ appcLuPairOperLocLuName DisplayString,
+ appcLuPairOperParLuName DisplayString,
+ appcLuPairOperParLuAlias DisplayString,
+ appcLuPairOperSessLimit Integer32,
+ appcLuPairOperSessSec INTEGER,
+ appcLuPairOperSecAccept INTEGER,
+ appcLuPairOperLinkObjId InstancePointer,
+ appcLuPairOperParaSessSup INTEGER,
+ appcLuPairOperParaSessSupLS INTEGER,
+ appcLuPairOperState INTEGER
+ }
+
+appcLuPairOperLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU. This field is from 1 to 17
+ characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present.
+
+ If this object has the same value as appcLluOperName,
+ then the two entries being indexed apply to the same
+ resource (specifically, to the same local LU)."
+
+ ::= { appcLuPairOperEntry 1 }
+
+appcLuPairOperParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU.
+ This field is from 1 to 17 characters in
+ length, including a period (.) which separates the
+ NetId from the NAU name if the NetId is present."
+
+ ::= { appcLuPairOperEntry 2 }
+
+appcLuPairOperParLuAlias OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+
+
+
+Allen, et. al. Standards Track [Page 40]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ DESCRIPTION
+ "A local alias for the partner LU. If not known or
+ not applicable, this object contains a zero-length
+ string."
+
+ ::= { appcLuPairOperEntry 3 }
+
+appcLuPairOperSessLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of sessions supported by this partner LU."
+
+ ::= { appcLuPairOperEntry 4 }
+
+appcLuPairOperSessSec OBJECT-TYPE
+ SYNTAX INTEGER {
+ required(1),
+ accepted(2),
+ notAllowed(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the type of security information that a local LU
+ will accept on BIND requests it receives from the partner LU.
+
+ required - Specifies that the BIND request must carry
+ session level verification information that
+ will be verified upon receipt.
+ accepted - Specifies that the BIND request may carry
+ session level verification information that
+ will be verified upon receipt.
+ notAllowed - Specifies that the BIND request must not carry
+ session level verification information."
+
+ ::= { appcLuPairOperEntry 5 }
+
+appcLuPairOperSecAccept OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ conversation(2),
+ alreadyVerified(3),
+ persistentVerification(4),
+ aVandpV(5)
+ }
+ MAX-ACCESS read-only
+
+
+
+Allen, et. al. Standards Track [Page 41]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ STATUS current
+ DESCRIPTION
+ "Specifies support for different levels of security acceptance
+ information in ATTACH requests received from this partner LU.
+
+ Possible values are:
+
+ none - No access security information will be
+ accepted on allocation requests (ATTACH) from
+ this LU.
+ conversation
+ - Allocation requests will not be accepted that
+ include already verified or persistent
+ verification indicators. Accept
+ conversation-level access security
+ information, which must include both a user
+ Id and password, and may also include a
+ profile.
+ alreadyVerified
+ - Allocation requests will be accepted that
+ include already verified indicators.
+ Persistent verification indicators will not
+ be accepted.
+ persistentVerification
+ - Allocation requests will be accepted that
+ include persistent verification indicators.
+ Already verified indicators will not be
+ accepted.
+ aVandpV - Allocation requests will be accepted that
+ include already verified or persistent
+ verification indicators."
+ ::= { appcLuPairOperEntry 6 }
+
+appcLuPairOperLinkObjId OBJECT-TYPE
+ SYNTAX InstancePointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the link associated with this partner LU. This
+ value points to the row in the table containing information on
+ the link instance. (e.g., the sdlcLSAdminTable of the SNA DLC
+ MIB module). This object may be NULL if the link is not
+ specified or if a link is not applicable (as for APPN-level
+ nodes)."
+
+ ::= { appcLuPairOperEntry 7 }
+
+appcLuPairOperParaSessSup OBJECT-TYPE
+
+
+
+Allen, et. al. Standards Track [Page 42]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Active Parallel Sessions Supported.
+
+ Indicates whether or not multiple session between the partner
+ LU and its associated local LU are permitted. Parallel
+ session support also indicates that Change Number of Sessions
+ (CNOS) will be used to negotiate session limits between the
+ LUs."
+
+ ::= { appcLuPairOperEntry 8 }
+
+appcLuPairOperParaSessSupLS OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Active Parallel Sessions Supported - last starting value.
+
+ This object represents the initial value proposed by the local
+ LU the last time this capability was negotiated, i.e., when
+ the first session was bound between the local LU and its
+ partner."
+
+ ::= { appcLuPairOperEntry 9 }
+
+appcLuPairOperState OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive (1),
+ active (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value identifies the current operational state of this LU
+ pair:
+
+ inactive (1) - no active or pending session exists
+ between the LUs.
+ active (2) - an active or pending session exists
+
+
+
+Allen, et. al. Standards Track [Page 43]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ between the LUs."
+
+ ::= { appcLuPairOperEntry 10 }
+
+
+-- *********************************************************************
+-- APPC Mode Admin Table
+-- Objects in this table contain default or expected configuration
+-- values for session modes.
+-- Modes that have active sessions appear in the appcModeOperTable.
+-- *********************************************************************
+appcModeAdminTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcModeAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "APPC Mode Table"
+
+ ::= { appcLu 5 }
+
+appcModeAdminEntry OBJECT-TYPE
+ SYNTAX AppcModeAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of APPC Mode Information Table."
+ INDEX { appcModeAdminLocLuName,
+ appcModeAdminParLuName,
+ appcModeAdminModeName }
+
+ ::= { appcModeAdminTable 1 }
+
+AppcModeAdminEntry ::= SEQUENCE {
+ appcModeAdminLocLuName DisplayString,
+ appcModeAdminParLuName DisplayString,
+ appcModeAdminModeName DisplayString,
+ appcModeAdminCosName DisplayString,
+ appcModeAdminSessEndTpName DisplayString,
+ appcModeAdminMaxSessLimit Integer32,
+ appcModeAdminMinCwinLimit Integer32,
+ appcModeAdminMinClosLimit Integer32,
+ appcModeAdminConWinAutoActLmt Integer32,
+ appcModeAdminRecvPacWinSz Integer32,
+ appcModeAdminSendPacWinSz Integer32,
+ appcModeAdminPrefRecvRuSz Integer32,
+ appcModeAdminPrefSendRuSz Integer32,
+ appcModeAdminRecvRuSzUpBnd Integer32,
+ appcModeAdminSendRuSzUpBnd Integer32,
+
+
+
+Allen, et. al. Standards Track [Page 44]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ appcModeAdminRecvRuSzLoBnd Integer32,
+ appcModeAdminSendRuSzLoBnd Integer32,
+ appcModeAdminSingSessReinit INTEGER,
+ appcModeAdminCompression INTEGER,
+ appcModeAdminInBoundCompLevel INTEGER,
+ appcModeAdminOutBoundCompLevel INTEGER,
+ appcModeAdminCompRleBeforeLZ INTEGER,
+ appcModeAdminSyncLvl INTEGER,
+ appcModeAdminCrypto INTEGER
+
+ }
+
+appcModeAdminLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU to which this mode definition
+ applies. This field is from 1 to 17 characters in length,
+ including a period (.) which separates the NetId from the
+ NAU name if the NetId is present.
+
+ The reserved value '*ALL' indicates that the mode definition
+ applies to all local LUs for the SNA node identified by
+ appcLocalCpName, and not just to a single local LU."
+
+ ::= { appcModeAdminEntry 1 }
+
+appcModeAdminParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU to which this mode definition
+ applies. This field is from 1 to 17 characters in length,
+ including a period (.) which separates the NetId from the
+ NAU name if the NetId is present.
+
+ The reserved value '*ALL' indicates that the mode definition
+ applies to all partner LUs for the SNA node identified by
+ appcModeAdminLocLuName, and not just to a single partner LU."
+
+ ::= { appcModeAdminEntry 2 }
+
+appcModeAdminModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS not-accessible
+ STATUS current
+
+
+
+Allen, et. al. Standards Track [Page 45]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ DESCRIPTION
+ "Specifies the mode name. A mode defines the characteristics
+ for a group of sessions. The mode name can be blank (8
+ space characters). "
+
+ ::= { appcModeAdminEntry 3 }
+
+appcModeAdminCosName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the class of service (COS) name associated with
+ this mode. If the implementation does not support COS names,
+ a null string is returned."
+
+ ::= { appcModeAdminEntry 4 }
+
+appcModeAdminSessEndTpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the transaction program (TP) to be
+ invoked when a session using this mode is deactivated or ended.
+ If no such TP is defined, this object is a null string. When
+ the TP name consists entirely of displayable EBCDIC code
+ points, it is mapped directly to the equivalent ASCII display
+ string. However, registered TP names always have a non-
+ displayable EBCDIC code point (value less than or equal to
+ x'3F') as the first character, so they cannot be directly
+ mapped to an ASCII display string. These TP names are
+ converted to a display string that is equivalent to a
+ hexadecimal display of the EBCDIC code points. For example,
+ the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+ ASCII display string '06F1' (including the two single quotes).
+ "
+
+ ::= { appcModeAdminEntry 5 }
+
+appcModeAdminMaxSessLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum value that the local LU is to use,
+ during CNOS processing, for the session limit. The local LU,
+ as a target LU, will negotiate a higher session limit it
+
+
+
+Allen, et. al. Standards Track [Page 46]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ receives in the CNOS request down to this maximum value. The
+ local LU, as a source LU, will restrict the session limit it
+ sends in a CNOS request to a value less than or equal to this
+ maximum value."
+
+ ::= { appcModeAdminEntry 6 }
+
+appcModeAdminMinCwinLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the default minimum contention winner sessions
+ limit. Some implementations internally issue a
+ INITIALIZE_SESSION_LIMIT verb when a Mode is created. This
+ value is the parameter used for the CNOS processing of that
+ verb. This parameter is not used when issuing an explicit
+ INITIALIZE_SESSION_LIMIT verb. The equivalent object in
+ appcCnosCommandTable is used."
+ ::= { appcModeAdminEntry 7 }
+
+appcModeAdminMinClosLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the default minimum contention loser sessions limit.
+ Some implementations internally issue a
+ INITIALIZE_SESSION_LIMIT verb when a Mode is created. This
+ value is the parameter used for the CNOS processing of that
+ verb. This is the same as target minimum contention winner
+ sessions. This parameter is not used when issuing an explicit
+ INITIALIZE_SESSION_LIMIT verb. The equivalent object in
+ appcCnosCommandTable is used."
+
+ ::= { appcModeAdminEntry 8 }
+
+appcModeAdminConWinAutoActLmt OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the limit on the number of contention winner
+ sessions to be automatically activated when the minimum number
+ of contention winner sessions increases (as a result of CNOS
+ processing). The actual number of sessions activated is the
+ lesser of this value and the new minimum number of contention
+ winner sessions. "
+
+
+
+Allen, et. al. Standards Track [Page 47]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcModeAdminEntry 9 }
+
+appcModeAdminRecvPacWinSz OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the size of the receive pacing window. This value is
+ used for negotiation during session activations (SNA BIND).
+
+ The meaning of this value when set to 0 depends on whether
+ adaptive pacing is supported:
+ adaptive pacing No limit on window size
+ fixed pacing No pacing is supported"
+
+ ::= { appcModeAdminEntry 10 }
+
+appcModeAdminSendPacWinSz OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the size of the send pacing window. This value is
+ used for negotiation during session activations (SNA BIND).
+
+ The meaning of this value when set to 0 depends on whether
+ adaptive pacing is supported:
+ adaptive pacing No limit on window size
+ fixed pacing No pacing is supported"
+
+ ::= { appcModeAdminEntry 11 }
+
+appcModeAdminPrefRecvRuSz OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the preferred receive RU (Request Unit) size of
+ normal-flow requests on the sessions. This value must be less
+ than or equal to the value specified in
+ appcModeAdminRecvRuSzUpBnd and greater than or equal to the
+ value specified in appcModeAdminRecvRuSzLoBnd.
+
+ The local LU specifies this value for the receive maximum RU
+ size in session activation (SNA BIND) requests and responses.
+ It will allow negotiation up to the appcModeAdminRecvRuSzUpBnd
+ value or down to the appcModeAdminRecvRuSzLoBnd value."
+
+
+
+
+Allen, et. al. Standards Track [Page 48]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcModeAdminEntry 12 }
+
+appcModeAdminPrefSendRuSz OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the preferred send RU (Request Unit) size of normal-
+ flow requests on the sessions. This value must be less than or
+ equal to the value specified in appcModeAdminSendRuSzUpBnd and
+ greater than or equal to the value specified in
+ appcModeAdminSendRuSzLoBnd.
+
+ The local LU specifies this value for the send maximum RU
+ size in session activation (SNA BIND) requests and responses.
+ It will allow negotiation up to the appcModeAdminSendRuSzUpBnd
+ value or down to the appcModeAdminSendRuSzLoBnd value."
+
+ ::= { appcModeAdminEntry 13 }
+
+appcModeAdminRecvRuSzUpBnd OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the upper bound for the maximum receive RU
+ (Request Unit) size of normal-flow requests. This is used
+ for negotiation during session activations (SNA BIND). "
+
+ ::= { appcModeAdminEntry 14 }
+
+appcModeAdminSendRuSzUpBnd OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the upper bound for the maximum send RU (Request
+ Unit) size of normal-flow requests. This is used for
+ negotiation during session activations (SNA BIND). "
+
+ ::= { appcModeAdminEntry 15 }
+
+appcModeAdminRecvRuSzLoBnd OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the lower bound for the maximum receive RU (Request
+
+
+
+Allen, et. al. Standards Track [Page 49]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ Unit) size of normal-flow requests. This is used for
+ negotiation during session activations (SNA BIND). "
+
+ ::= { appcModeAdminEntry 16 }
+
+appcModeAdminSendRuSzLoBnd OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the lower bound for the maximum send RU (Request
+ Unit) size of normal-flow requests. This is used for
+ negotiation during session activations (SNA BIND). "
+
+ ::= { appcModeAdminEntry 17 }
+
+appcModeAdminSingSessReinit OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(1),
+ operatorControlled(2),
+ primaryOnly(3),
+ secondaryOnly(4),
+ primaryOrSecondary(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the responsibility for session reinitiation of a
+ single session with the partner LU (when the session goes
+ down). The local LU uses this parameter to specify the session
+ reinitiation responsibility in session activation (SNA BIND)
+ requests and responses.
+
+ notApplicable - specifies that this parameter has
+ no meaning since the value of
+ appcLuPairAdminParaSessSup is yes.
+ The field in the SNA BIND is
+ reserved (set to zero).
+ operatorControlled - specifies that neither LU will
+ automatically attempt to reinitiate
+ the session. The operator on either
+ side will manually reactivate the
+ session. A contention race (both
+ side reinitiating at the same time)
+ is won by the LU with the
+ lexicographically greater fully-
+ qualified LU name.
+ primaryOnly - specifies that the primary LU will
+
+
+
+Allen, et. al. Standards Track [Page 50]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ automatically attempt to reinitiate
+ the session.
+ secondaryOnly - specifies that the secondary LU will
+ automatically attempt to reinitiate
+ the session.
+ primaryOrSecondary - specifies that either the primary or
+ the secondary may automatically
+ attempt to reinitiate the session.
+ A contention race is handled the
+ same way as with operatorControlled.
+ "
+ ::= { appcModeAdminEntry 18 }
+
+appcModeAdminCompression OBJECT-TYPE
+ SYNTAX INTEGER {
+ prohibited(1),
+ required(2),
+ negotiable(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether compression is supported. The local LU uses
+ this value for negotiation during session activation (SNA
+ BIND).
+
+ prohibited - specifies that no compression is to be used.
+ required - specifies that compression is required.
+ negotiable - specifies that the usage of compression
+ is to be negotiated between the LUs. The
+ level of compression is also negotiated."
+
+ ::= { appcModeAdminEntry 19 }
+
+appcModeAdminInBoundCompLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ rle(2),
+ lz9(3),
+ lz10(4),
+ lz12(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum level of compression supported for
+ inbound data. The local LU uses this value in conjunction with
+ appcModeAdminCompression for negotiation during session
+
+
+
+Allen, et. al. Standards Track [Page 51]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ activation (SNA BIND).
+
+ none - specifies that no compression is to be used.
+ rle - specifies run-length encoding compression
+ in which a 1 or 2 byte sequence substitution is
+ used for each repeated run of the same character.
+ lz9 - specifies Lempel-Ziv-like compression in which
+ 9 bit codes are used to substitute repeated
+ substrings in the data stream. These codes are
+ indices that refer to entries in a common
+ dictionary generated adaptively at both sender and
+ receiver as the data flows and compression occurs.
+ The larger of number bits used for the code, the
+ more storage space is required for the dictionary,
+ but the larger the compression ratio.
+ lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
+ lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
+
+ ::= { appcModeAdminEntry 20 }
+
+appcModeAdminOutBoundCompLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ rle(2),
+ lz9(3),
+ lz10(4),
+ lz12(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum level of compression supported for
+ outbound data. The local LU uses this value in conjunction
+ with appcModeAdminCompression for negotiation during session
+ activation (SNA BIND).
+
+ none - specifies that no compression is to be used.
+ rle - specifies run-length encoding compression
+ in which a 1 or 2 byte sequence substitution is
+ used for each repeated run of the same character.
+ lz9 - specifies Lempel-Ziv-like compression in which
+ 9 bit codes are used to substitute repeated
+ substrings in the data stream. These codes are
+ indices that refer to entries in a common
+ dictionary generated adaptively at both sender and
+ receiver as the data flows and compression occurs.
+ The larger of number bits used for the code, the
+ more storage space is required for the dictionary,
+
+
+
+Allen, et. al. Standards Track [Page 52]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ but the larger the compression ratio.
+ lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
+ lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
+
+ ::= { appcModeAdminEntry 21 }
+
+appcModeAdminCompRleBeforeLZ OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether run-length encoding is to be applied to the
+ data before applying Lempel-Ziv-like compression. The local LU
+ uses this value for negotiation during session activation (SNA
+ BIND). This parameter is only supported if LZ compression is
+ used."
+
+ ::= { appcModeAdminEntry 22 }
+
+appcModeAdminSyncLvl OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ noneConfirm(2),
+ noneConfirmSyncPoint(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the sync level support. This value is used for
+ negotiation during session activations (SNA BIND).
+
+ none - No sync level is supported.
+ noneConfirm - None and Confirm levels supported.
+ noneConfirmSyncPoint - None, Confirm, and Sync Point is
+ supported.
+ "
+
+ ::= { appcModeAdminEntry 23 }
+
+appcModeAdminCrypto OBJECT-TYPE
+ SYNTAX INTEGER {
+ notSupported(1),
+ mandatory(2),
+ selective(3)
+ }
+
+
+
+Allen, et. al. Standards Track [Page 53]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether session-level cryptography is supported.
+ This value is used for negotiation during session activations
+ (SNA BIND).
+ notSupported - Specifies session-level cryptography
+ is not to be used.
+ mandatory - Specifies session-level cryptography
+ must be used.
+ selective - Specifies session-level cryptography
+ is required just on selected requests
+ flowing on the sessions."
+
+ ::= { appcModeAdminEntry 24 }
+
+-- *********************************************************************
+-- APPC Mode Oper Table
+-- Objects in this table contain current operational values, such
+-- as state values or negotiated parameters, for session modes.
+--
+-- *********************************************************************
+appcModeOperTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcModeOperEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Operational APPC Mode Information. Two entries are present in
+ the table when both LUs in a pair are local."
+
+ ::= { appcLu 6 }
+
+appcModeOperEntry OBJECT-TYPE
+ SYNTAX AppcModeOperEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of APPC mode operational information table. This entry
+ does not augment the appcModeAdminEntry, but reflects an actual
+ operational mode for a given local LU - partner LU pair."
+
+ INDEX { appcModeOperLocLuName,
+ appcModeOperParLuName,
+ appcModeOperModeName }
+
+ ::= { appcModeOperTable 1 }
+
+
+
+
+
+Allen, et. al. Standards Track [Page 54]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+AppcModeOperEntry ::= SEQUENCE {
+
+ appcModeOperLocLuName DisplayString,
+ appcModeOperParLuName DisplayString,
+ appcModeOperModeName DisplayString,
+ appcModeOperCosName DisplayString,
+ appcModeOperSessEndTpName DisplayString,
+ appcModeOperSessLimit Integer32,
+ appcModeOperMaxSessLimit Integer32,
+ appcModeOperMinCwinLimit Integer32,
+ appcModeOperMinClosLimit Integer32,
+ appcModeOperConWinAutoActLmt Integer32,
+ appcModeOperRecvPacWinSz Integer32,
+ appcModeOperSendPacWinSz Integer32,
+ appcModeOperPrefRecvRuSz Integer32,
+ appcModeOperPrefSendRuSz Integer32,
+ appcModeOperRecvRuSzUpBnd Integer32,
+ appcModeOperSendRuSzUpBnd Integer32,
+ appcModeOperRecvRuSzLoBnd Integer32,
+ appcModeOperSendRuSzLoBnd Integer32,
+ appcModeOperSingSessReinit INTEGER,
+ appcModeOperCompression INTEGER,
+ appcModeOperInBoundCompLevel INTEGER,
+ appcModeOperOutBoundCompLevel INTEGER,
+ appcModeOperCompRleBeforeLZ INTEGER,
+ appcModeOperSyncLvl INTEGER,
+ appcModeOperCrypto INTEGER,
+ appcModeOperSyncLvlLastStart INTEGER,
+ appcModeOperCryptoLastStart INTEGER,
+ appcModeOperCNOSNeg INTEGER,
+ appcModeOperActCwin Gauge32,
+ appcModeOperActClos Gauge32,
+ appcModeOperPndCwin Gauge32,
+ appcModeOperPndClos Gauge32,
+ appcModeOperPtmCwin Gauge32,
+ appcModeOperPtmClos Gauge32,
+ appcModeOperDrainSelf INTEGER,
+ appcModeOperDrainPart INTEGER
+ }
+
+appcModeOperLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU. This field is from 1 to 17
+ characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present.
+
+
+
+Allen, et. al. Standards Track [Page 55]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ If this object has the same value as appcLluOperName,
+ then the two entries being indexed apply to the same
+ resource (specifically, to the same local LU)."
+
+ ::= { appcModeOperEntry 1 }
+
+appcModeOperParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU. This field is from 1 to 17
+ characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present.
+
+ If this object has the same value as appcLuPairOperParLuName,
+ then the two entries being indexed apply to the same
+ resource (specifically, to the same partner LU)."
+
+ ::= { appcModeOperEntry 2 }
+
+appcModeOperModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the mode name. A mode defines the characteristics
+ for a group of sessions. The mode name can be blank (8
+ space characters). "
+
+ ::= { appcModeOperEntry 3 }
+
+appcModeOperCosName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the class of service (COS) name associated with
+ this mode. If the implementation does not support COS names,
+ a zero-length string is returned."
+
+ ::= { appcModeOperEntry 4 }
+
+appcModeOperSessEndTpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Allen, et. al. Standards Track [Page 56]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ "Specifies the name of the transaction program (TP) to be
+ invoked when a session using this mode is deactivated or ended.
+ If the name is NULL, no transaction program is invoked. When
+ the TP name consists entirely of displayable EBCDIC code
+ points, it is mapped directly to the equivalent ASCII display
+ string. However, registered TP names always have a non-
+ displayable EBCDIC code point (value less than or equal to
+ x'3F') as the first character, so they cannot be directly
+ mapped to an ASCII display string. These TP names are
+ converted to a display string that is equivalent to a
+ hexadecimal display of the EBCDIC code points. For example,
+ the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+ ASCII display string '06F1' (including the two single quotes)."
+
+ ::= { appcModeOperEntry 5 }
+
+appcModeOperSessLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the current session limit of this mode as negotiated
+ through APPC CNOS (Change Number of Sessions) processing.
+ Identifies the total number of sessions that can be established
+ between the local and partner LU using this mode."
+
+ ::= { appcModeOperEntry 6 }
+
+appcModeOperMaxSessLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum value that the local LU is to use,
+ during CNOS processing, for the session limit. The local LU,
+ as a target LU, will negotiate a higher session limit it
+ receives in the CNOS request down to this maximum value. The
+ local LU, as a source LU, will restrict the session limit it
+ sends in a CNOS request to a value less than or equal to this
+ maximum value."
+
+ ::= { appcModeOperEntry 7 }
+
+appcModeOperMinCwinLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Allen, et. al. Standards Track [Page 57]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ "Specifies the minimum contention winner sessions limit that
+ was negotiated via CNOS processing."
+
+ ::= { appcModeOperEntry 8 }
+
+appcModeOperMinClosLimit OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the minimum contention loser sessions limit that
+ was negotiated via CNOS processing. This is the same as
+ target minimum contention winner sessions."
+
+ ::= { appcModeOperEntry 9 }
+
+appcModeOperConWinAutoActLmt OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the limit on the number of contention winner sessions
+ to be automatically activated when the minimum number of
+ contention winner sessions increases (as a result of CNOS
+ processing). The actual number of sessions activated is the
+ lesser of this value and the new minimum number of contention
+ winner sessions. "
+
+ ::= { appcModeOperEntry 10 }
+
+appcModeOperRecvPacWinSz OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the size of the receive pacing window. This value is
+ used for negotiation during session activations (SNA BIND).
+
+ The meaning of this value when set to 0 depends on whether
+ adaptive pacing is supported:
+ adaptive pacing - No limit on window size
+ fixed pacing - No pacing is supported"
+
+ ::= { appcModeOperEntry 11 }
+
+appcModeOperSendPacWinSz OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+
+
+
+Allen, et. al. Standards Track [Page 58]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ STATUS current
+ DESCRIPTION
+ "Specifies the size of the send pacing window. This value is
+ used for negotiation during session activations (SNA BIND).
+
+ The meaning of this value when set to 0 depends on whether
+ adaptive pacing is supported:
+ adaptive pacing No limit on window size
+ fixed pacing No pacing is supported"
+
+ ::= { appcModeOperEntry 12 }
+
+appcModeOperPrefRecvRuSz OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the preferred receive RU (Request Unit) size of
+ normal-flow requests on the sessions. This value must be less
+ than or equal to the value specified in
+ appcModeOperRecvRuSzUpBnd and greater than or equal to the
+ value specified in appcModeOperRecvRuSzLoBnd.
+
+ The local LU specifies this value for the receive maximum RU
+ size in session activation (SNA BIND) requests and responses.
+ It will allow negotiation up to the appcModeOperRecvRuSzUpBnd
+ value or down to the appcModeOperRecvRuSzLoBnd value."
+
+ ::= { appcModeOperEntry 13 }
+
+appcModeOperPrefSendRuSz OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the preferred send RU (Request Unit) size of normal-
+ flow requests on the sessions. This value must be less than or
+ equal to the value specified in appcModeOperSendRuSzUpBnd and
+ greater than or equal to the value specified in
+ appcModeOperSendRuSzLoBnd.
+
+ The local LU specifies this value for the send maximum RU
+ size in session activation (SNA BIND) requests and responses.
+ It will allow negotiation up to the appcModeOperSendRuSzUpBnd
+ value or down to the appcModeOperSendRuSzLoBnd value."
+
+ ::= { appcModeOperEntry 14 }
+
+
+
+
+Allen, et. al. Standards Track [Page 59]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcModeOperRecvRuSzUpBnd OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the upper bound for the maximum receive RU
+ (Request Unit) size of normal-flow requests. This is used
+ for negotiation during session activations (SNA BIND). "
+
+ ::= { appcModeOperEntry 15 }
+
+appcModeOperSendRuSzUpBnd OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the upper bound for the maximum send RU (Request
+ Unit) size of normal-flow requests. This is used for
+ negotiation during session activations (SNA BIND). "
+
+ ::= { appcModeOperEntry 16 }
+
+appcModeOperRecvRuSzLoBnd OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the lower bound for the maximum receive RU
+ (Request Unit) size of normal-flow requests. This is used
+ for negotiation during session activations (SNA BIND). "
+
+ ::= { appcModeOperEntry 17 }
+
+appcModeOperSendRuSzLoBnd OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the lower bound for the maximum send RU
+ (Request Unit) size of normal-flow requests. This is used
+ for negotiation during session activations (SNA BIND). "
+
+ ::= { appcModeOperEntry 18 }
+
+appcModeOperSingSessReinit OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(1),
+ operatorControlled(2),
+
+
+
+Allen, et. al. Standards Track [Page 60]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ primaryOnly(3),
+ secondaryOnly(4),
+ primaryOrSecondary(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the responsibility for session reinitiation of a
+ single session with the partner LU (when the session goes
+ down). The local LU uses this parameter to specify the session
+ reinitiation responsibility in session activation (SNA BIND)
+ requests and responses.
+
+ notApplicable - specifies that this parameter has
+ no meaning since the value of
+ appcLuPairOperParaSessSup is yes.
+ The field in the SNA BIND is
+ reserved (set to zero).
+ operatorControlled - specifies that neither LU will
+ automatically attempt to reinitiate
+ the session. The operator on either
+ side will manually reactivate the
+ session. A contention race (both
+ side reinitiating at the same time)
+ is won by the LU with the
+ lexicographically greater fully-
+ qualified LU name.
+ primaryOnly - specifies that the primary LU will
+ automatically attempt to reinitiate
+ the session.
+ secondaryOnly - specifies that the secondary LU will
+ automatically attempt to reinitiate
+ the session.
+ primaryOrSecondary - specifies that either the primary or
+ the secondary may automatically
+ attempt to reinitiate the session.
+ A contention race is handled the
+ same way as with operatorControlled.
+ "
+ ::= { appcModeOperEntry 19 }
+
+appcModeOperCompression OBJECT-TYPE
+ SYNTAX INTEGER {
+ prohibited(1),
+ required(2),
+ negotiable(3)
+ }
+ MAX-ACCESS read-only
+
+
+
+Allen, et. al. Standards Track [Page 61]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ STATUS current
+ DESCRIPTION
+ "Specifies whether compression is supported. The local LU uses
+ this value for negotiation during session activation (SNA
+ BIND).
+
+ prohibited - specifies that no compression is to be used.
+ required - specifies that compression is required.
+ negotiable - specifies that the usage of compression
+ is to be negotiated between the LUs. The
+ level of compression is also negotiated."
+
+ ::= { appcModeOperEntry 20 }
+
+appcModeOperInBoundCompLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ rle(2),
+ lz9(3),
+ lz10(4),
+ lz12(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum level of compression supported for
+ inbound data. The local LU uses this value in conjunction with
+ appcModeOperCompression for negotiation during session
+ activation (SNA BIND).
+
+ none - specifies that no compression is to be used.
+ rle - specifies run-length encoding compression
+ in which a 1 or 2 byte sequence substitution is
+ used for each repeated run of the same character.
+ lz9 - specifies Lempel-Ziv-like compression in which
+ 9 bit codes are used to substitute repeated
+ substrings in the data stream. These codes are
+ indices that refer to entries in a common
+ dictionary generated adaptively at both sender and
+ receiver as the data flows and compression occurs.
+ The larger of number bits used for the code, the
+ more storage space is required for the dictionary,
+ but the larger the compression ratio.
+ lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
+ lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
+
+ ::= { appcModeOperEntry 21 }
+
+
+
+
+Allen, et. al. Standards Track [Page 62]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcModeOperOutBoundCompLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ rle(2),
+ lz9(3),
+ lz10(4),
+ lz12(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum level of compression supported for
+ outbound data. The local LU uses this value in conjunction
+ with appcModeOperCompression for negotiation during session
+ activation (SNA BIND).
+
+ none - specifies that no compression is to be used.
+ rle - specifies run-length encoding compression
+ in which a 1 or 2 byte sequence substitution is
+ used for each repeated run of the same character.
+ lz9 - specifies Lempel-Ziv-like compression in which
+ 9 bit codes are used to substitute repeated
+ substrings in the data stream. These codes are
+ indices that refer to entries in a common
+ dictionary generated adaptively at both sender and
+ receiver as the data flows and compression occurs.
+ The larger of number bits used for the code, the
+ more storage space is required for the dictionary,
+ but the larger the compression ratio.
+ lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
+ lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
+
+ ::= { appcModeOperEntry 22 }
+
+appcModeOperCompRleBeforeLZ OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether run-length encoding is to be applied to the
+ data before applying Lempel-Ziv-like compression. The local LU
+ uses this value for negotiation during session activation (SNA
+ BIND). This parameter is only supported if LZ compression is
+ used."
+
+
+
+
+Allen, et. al. Standards Track [Page 63]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcModeOperEntry 23 }
+
+appcModeOperSyncLvl OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ noneConfirm(2),
+ noneConfirmSyncPoint(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the sync level support for sessions involving this
+ LU pair and mode name.
+
+ none - No sync level is supported.
+ noneConfirm - None and Confirm level supported.
+ noneConfirmSyncPoint - None, Confirm and Sync Point is
+ supported.
+ "
+
+ ::= { appcModeOperEntry 24 }
+
+appcModeOperCrypto OBJECT-TYPE
+ SYNTAX INTEGER {
+ notSupported(1),
+ mandatory(2),
+ selective(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether session-level cryptography is supported for
+ sessions involving this LU pair and mode name.
+
+ notSupported - Specifies session-level cryptography
+ is not being used.
+ mandatory - Specifies session-level cryptography
+ in being used on all requests
+ flowing on the sessions.
+ selective - Specifies session-level cryptography
+ is required just on selected
+ requests flowing on the sessions."
+
+ ::= { appcModeOperEntry 25 }
+
+appcModeOperSyncLvlLastStart OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+
+
+
+Allen, et. al. Standards Track [Page 64]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ noneConfirm(2),
+ noneConfirmSyncPoint(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the sync level support. This value represents the
+ initial value proposed by the local LU the last time this
+ capability was negotiated, i.e., when the first session was
+ bound between the local LU and its partner.
+
+ none - No sync level is supported.
+ noneConfirm - None and Confirm level supported.
+ noneConfirmSyncPoint - None, Confirm and Sync Point is
+ supported.
+ "
+
+ ::= { appcModeOperEntry 26 }
+
+appcModeOperCryptoLastStart OBJECT-TYPE
+ SYNTAX INTEGER {
+ notSupported(1),
+ mandatory(2),
+ selective(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether session-level cryptography is supported.
+ This value represents the initial value proposed by the local
+ LU the last time this capability was negotiated, i.e., when
+ the first session was bound between the local LU and its
+ partner.
+ notSupported - Specifies session-level cryptography
+ is not to be used.
+ mandatory - Specifies session-level cryptography
+ must be used.
+ selective - Specifies session-level cryptography
+ is required just on selected
+ requests flowing on the sessions."
+
+ ::= { appcModeOperEntry 27 }
+
+appcModeOperCNOSNeg OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+
+
+
+Allen, et. al. Standards Track [Page 65]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether CNOS negotiation is in process. CNOS
+ negotiation is used to set or change the various session limits
+ for a mode."
+
+ ::= { appcModeOperEntry 28 }
+
+appcModeOperActCwin OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the number of active contention winner sessions."
+
+ ::= { appcModeOperEntry 29 }
+
+appcModeOperActClos OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the number of active contention loser sessions."
+
+ ::= { appcModeOperEntry 30 }
+
+appcModeOperPndCwin OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the number of contention winner sessions that are
+ pending activation."
+
+ ::= { appcModeOperEntry 31 }
+
+appcModeOperPndClos OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the number of contention loser sessions that are
+ pending activation."
+
+ ::= { appcModeOperEntry 32 }
+
+appcModeOperPtmCwin OBJECT-TYPE
+
+
+
+Allen, et. al. Standards Track [Page 66]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the number of contention winner sessions that are
+ pending termination."
+
+ ::= { appcModeOperEntry 33 }
+
+appcModeOperPtmClos OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the number of contention loser sessions that are
+ pending termination."
+
+ ::= { appcModeOperEntry 34 }
+
+appcModeOperDrainSelf OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the local LU is draining its conversations
+ for this mode. When a mode session limit is reset (via a CNOS
+ RESET_SESSION_LIMIT request), the local LU could be set to
+ process all queued conversations before deactivating all of the
+ sessions (using the SNA Bracket Initiation Stopped or BIS
+ protocol). "
+
+ ::= { appcModeOperEntry 35 }
+
+appcModeOperDrainPart OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the partner LU is draining its conversations
+ for this mode. When a mode session limit is reset (via a CNOS
+ RESET_SESSION_LIMIT request), the partner LU could be set to
+ process all queued conversations before deactivating all of the
+
+
+
+Allen, et. al. Standards Track [Page 67]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ sessions (using the SNA Bracket Initiation Stop or BIS
+ protocol). "
+
+ ::= { appcModeOperEntry 36 }
+
+-- *********************************************************************
+-- APPC TP Admin Table
+-- Objects in this table contain default or expected configuration
+-- values for remotely attachable transaction programs.
+-- *********************************************************************
+appcTpAdminTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcTpAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "APPC Local TP Table"
+
+ ::= { appcTp 1 }
+
+appcTpAdminEntry OBJECT-TYPE
+ SYNTAX AppcTpAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of APPC Local TP Information Table."
+
+ INDEX { appcTpAdminLocLuName,
+ appcTpAdminTpName }
+
+ ::= { appcTpAdminTable 1 }
+
+AppcTpAdminEntry ::= SEQUENCE {
+ appcTpAdminLocLuName DisplayString,
+ appcTpAdminTpName DisplayString,
+ appcTpAdminFileSpec DisplayString,
+ appcTpAdminStartParm DisplayString,
+ appcTpAdminTpOperation INTEGER,
+ appcTpAdminInAttachTimeout Integer32,
+ appcTpAdminRcvAllocTimeout Integer32,
+ appcTpAdminSyncLvl INTEGER,
+ appcTpAdminInstLmt Integer32,
+ appcTpAdminStatus INTEGER,
+ appcTpAdminLongRun INTEGER,
+ appcTpAdminConvType INTEGER,
+ appcTpAdminConvDuplex INTEGER,
+ appcTpAdminConvSecReq INTEGER,
+ appcTpAdminVerPip INTEGER,
+ appcTpAdminPipSubNum Integer32
+
+
+
+Allen, et. al. Standards Track [Page 68]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ }
+
+appcTpAdminLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU to which this TP definition
+ applies. This field is from 1 to 17 characters in length,
+ including a period (.) which separates the NetId from the NAU
+ name if the NetId is present.
+
+ The reserved value '*ALL' indicates that the TP definition
+ applies to all local LUs, and not just to a single local LU."
+
+ ::= { appcTpAdminEntry 1 }
+
+appcTpAdminTpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The local transaction program name. This name is sent on an
+ ATTACH remote allocation request.
+
+ When the TP name consists entirely of displayable EBCDIC
+ code points, it is mapped directly to the equivalent ASCII
+ display string. However, registered TP names always have a
+ non-displayable EBCDIC code point (value less than or equal to
+ x'3F') as the first character, so they cannot be directly
+ mapped to an ASCII display string. These TP names are
+ converted to a display string that is equivalent to a
+ hexadecimal display of the EBCDIC code points. For example,
+ the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+ ASCII display string '06F1' (including the two single quotes)."
+
+ ::= { appcTpAdminEntry 2 }
+
+appcTpAdminFileSpec OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..80))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local file specification of the transaction program.
+ May be a zero-length string if not applicable."
+
+ ::= { appcTpAdminEntry 3 }
+
+
+
+
+Allen, et. al. Standards Track [Page 69]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcTpAdminStartParm OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A parameter string passed to the transaction program when it
+ is started. May be a zero-length string if not supported. "
+
+ ::= { appcTpAdminEntry 4 }
+
+appcTpAdminTpOperation OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ queuedOperatorStarted(2),
+ queuedOperatorPreloaded(3),
+ queuedAmStarted(4),
+ nonqueuedAmStarted(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies how the program will be started.
+ other - Specifies that the program operation is none of
+ the methods specified. It may be a
+ product-specific method.
+
+ queuedOperatorStarted - Specifies that one version of the
+ program will be run at a time. If an incoming
+ attach arrives and the program has not been started
+ yet, APPC will issue a message to the operator to
+ start the specified program. Subsequent attaches
+ that arrive while the program is active will be
+ queued.
+
+ queuedOperatorPreloaded - Specifies that one version of the
+ program will be run at a time. If an incoming
+ attach arrives and the program has not been started
+ yet, the Attach will be rejected. The APPC attach
+ manager determines that a TP has started upon
+ reception of an APPC RECEIVE_ALLOCATE verb, or a
+ CPI-C Accept_Conversation (CMACCP) or
+ Specify_Local_TP_Name (CMSLTP) call. No message is
+ sent to the operator. Subsequent attaches that
+ arrive while the program is active are queued.
+
+ queuedAmStarted - Specifies that one version of the
+ program will be run at a time and will be started
+ by the APPC attach manager. Subsequent attaches
+
+
+
+Allen, et. al. Standards Track [Page 70]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ that arrive while the program is active will be
+ queued.
+
+ nonqueuedAmStarted - Specifies that multiple copies of the
+ program will be run at a time and will be started
+ by the APPC attach manager."
+
+ ::= { appcTpAdminEntry 5 }
+
+appcTpAdminInAttachTimeout OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies the number of seconds incoming attaches
+ will be queued waiting for an APPC program to issue a
+ RECEIVE_ALLOCATE verb or for a CPI-C program to issue an
+ Accept_Conversation (CMACCP) call. This parameter is
+ meaningful only when appcTpAdminTpOperation has one of the
+ following values:
+ queuedOperatorStarted
+ queuedOperatorPreloaded
+ queuedAmStarted
+
+ A value of zero indicates that there is no timeout."
+
+ ::= { appcTpAdminEntry 6 }
+
+appcTpAdminRcvAllocTimeout OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies the number of seconds an APPC program's
+ RECEIVE_ALLOCATE verb or a CPI-C program's Accept_Conversation
+ (CMACCP) call will wait for an incoming attach to arrive.
+
+ A value of zero indicates that there is no timeout."
+
+ ::= { appcTpAdminEntry 7 }
+
+appcTpAdminSyncLvl OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ confirm(2),
+ noneAndConfirm(3),
+ syncpoint(4),
+ noneAndSyncpoint(5),
+
+
+
+Allen, et. al. Standards Track [Page 71]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ confirmAndSyncpoint(6),
+ all(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the synchronization level or levels that the
+ transaction program supports. The levels are defined as
+ follows:
+
+ none - allocation requests indicating a
+ synchronization level of none are allowed to
+ start the program.
+ confirm - allocation requests indicating a
+ synchronization level of confirm are allowed
+ to start the program.
+ syncpoint - allocation requests indicating a
+ synchronization level of sync point are
+ allowed to start the program."
+
+ ::= { appcTpAdminEntry 8 }
+
+appcTpAdminInstLmt OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of concurrent instances of this transaction
+ program that will be supported for a local LU. A value of
+ zero indicates that there is no limit."
+
+ ::= { appcTpAdminEntry 9 }
+
+appcTpAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ tempDisabled(2),
+ permDisabled(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the status of the TP relative to starting execution
+ when the local LU receives an allocation (ATTACH) request
+ naming this program.
+
+ enabled - the local LU can start the program.
+ tempDisabled - the local LU cannot start the
+
+
+
+Allen, et. al. Standards Track [Page 72]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ program. The local LU rejects the
+ request with an indication that the
+ TP is not available but retry is
+ possible.
+ permDisabled - the local LU cannot start the
+ program. The local LU rejects the
+ request with an indication that the
+ TP is not available and retry is
+ not possible."
+
+ ::= { appcTpAdminEntry 10 }
+
+appcTpAdminLongRun OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this is a long-running transaction program
+ (i.e., one that stays around even after the conversation goes
+ away)."
+
+ ::= { appcTpAdminEntry 11 }
+
+appcTpAdminConvType OBJECT-TYPE
+ SYNTAX INTEGER {
+ basic(1),
+ mapped(2),
+ basicOrMapped(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the conversation type (basic or mapped) that will be
+ used by the TP. This value is verified upon receipt of an
+ incoming attach. The acceptable values are:
+
+ basic - Indicates that this transaction program
+ supports basic conversations.
+
+ mapped - Indicates that this transaction program
+ supports mapped conversations.
+
+ basicOrMapped - Indicates that this transaction program
+ supports both basic and mapped
+ conversations."
+
+
+
+Allen, et. al. Standards Track [Page 73]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcTpAdminEntry 12 }
+
+appcTpAdminConvDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ half(1),
+ full(2),
+ halfOrFull(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the conversation duplex type (half or full) that
+ will be used by the TP. This value is verified upon receipt of
+ an incoming attach. The acceptable values are:
+
+ half - Indicates that this transaction program
+ supports half duplex conversations.
+
+ full - Indicates that this transaction program
+ supports full duplex conversations.
+
+ halfOrFull - Indicates that this transaction program
+ supports either half or full duplex
+ conversations."
+
+ ::= { appcTpAdminEntry 13 }
+
+appcTpAdminConvSecReq OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether conversation-level security information is
+ required on incoming attaches designating this TP name.
+ Conversation-level security verification is always performed on
+ those requests that include security information.
+
+ yes - Indicates that conversation-level security
+ information is required. ATTACHs designating the
+ transaction program must carry a user_id and
+ either a password or an already verified
+ indicator.
+
+ no - Indicates that no security information is
+ required. ATTACHs designating the transaction
+
+
+
+Allen, et. al. Standards Track [Page 74]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ program can omit or include security information."
+
+ ::= { appcTpAdminEntry 14 }
+
+appcTpAdminVerPip OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the number of PIP (Program Initialization
+ Parameters) subfields should be verified against the number
+ expected (appcTpAdminPipSubNum)."
+
+ ::= { appcTpAdminEntry 15 }
+
+appcTpAdminPipSubNum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the number of PIP subfields expected by the TP."
+
+ ::= { appcTpAdminEntry 16 }
+
+
+-- *********************************************************************
+-- APPC Active Session Table
+-- ---------------------------------------------------------------------
+-- This table contains information about active APPC sessions.
+-- *********************************************************************
+appcActSessTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcActSessEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table of active APPC sessions. Two entries are present in the
+ table when both session partners are local."
+
+ ::= { appcSession 1 }
+
+appcActSessEntry OBJECT-TYPE
+ SYNTAX AppcActSessEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+
+
+Allen, et. al. Standards Track [Page 75]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ "Entry of APPC Session Information Table. Indexed by LU pair
+ and integer-valued session index."
+
+ INDEX { appcActSessLocLuName,
+ appcActSessParLuName,
+ appcActSessIndex }
+
+ ::= { appcActSessTable 1 }
+
+AppcActSessEntry ::= SEQUENCE {
+ appcActSessLocLuName DisplayString,
+ appcActSessParLuName DisplayString,
+ appcActSessIndex Integer32,
+ appcActSessPcidCpName DisplayString,
+ appcActSessPcid OCTET STRING,
+ appcActSessPluIndicator INTEGER,
+ appcActSessModeName DisplayString,
+ appcActSessCosName DisplayString,
+ appcActSessTransPriority INTEGER,
+ appcActSessEnhanceSecSup INTEGER,
+ appcActSessSendPacingType INTEGER,
+ appcActSessSendRpc Gauge32,
+ appcActSessSendNxWndwSize Gauge32,
+ appcActSessRecvPacingType INTEGER,
+ appcActSessRecvRpc Gauge32,
+ appcActSessRecvNxWndwSize Gauge32,
+ appcActSessRscv OCTET STRING,
+ appcActSessInUse INTEGER,
+ appcActSessMaxSndRuSize INTEGER,
+ appcActSessMaxRcvRuSize INTEGER,
+ appcActSessSndPacingSize INTEGER,
+ appcActSessRcvPacingSize INTEGER,
+ appcActSessOperState INTEGER,
+ appcActSessUpTime TimeTicks,
+ appcActSessRtpNceId OCTET STRING,
+ appcActSessRtpTcid OCTET STRING,
+ appcActSessLinkIndex InstancePointer
+ }
+
+
+appcActSessLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the local LU for the session. This
+ field is from 1 to 17 characters in length, including a period
+ (.) which separates the NetId from the NAU name if the NetId is
+
+
+
+Allen, et. al. Standards Track [Page 76]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ present.
+
+ If this object has the same value as appcLluOperName, then the
+ two entries being indexed apply to the same resource
+ (specifically, to the same local LU)."
+
+ ::= { appcActSessEntry 1 }
+
+appcActSessParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the partner LU for the session. This
+ field is from 1 to 17 characters in length, including a period
+ (.) which separates the NetId from the NAU name if the NetId is
+ present.
+
+ If this object has the same value as appcLuPairOperParLuName,
+ then the two entries being indexed apply to the same resource
+ (specifically, to the same partner LU)."
+
+ ::= { appcActSessEntry 2 }
+
+appcActSessIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This value identifies the index of the session, which is
+ unique for this LU pair. It is recommended that an Agent not
+ reuse the index of a deactivated session for a significant
+ period of time (e.g., one week)."
+
+ ::= { appcActSessEntry 3 }
+
+appcActSessPcidCpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0 | 3..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network-qualified CP name of the node at which the session
+ and PCID originated. For APPN and LEN nodes, this is either CP
+ name of the APPN node at which the origin LU is located or the
+ CP name of the NN serving the LEN node at which the origin LU
+ is located. This field is from 3 to 17 characters in length,
+ including a period (.) which separates the NetId from the NAU
+ name. A null string indicates that the value is unknown."
+
+
+
+Allen, et. al. Standards Track [Page 77]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcActSessEntry 4 }
+
+appcActSessPcid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0|8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The procedure correlation identifier (PCID) of a session. It
+ is an 8-octet value assigned by the control point providing
+ session services for the primary LU. A null string indicates
+ that the value is unknown."
+
+ ::= { appcActSessEntry 5 }
+
+appcActSessPluIndicator OBJECT-TYPE
+ SYNTAX INTEGER {
+ localLuIsPlu(1),
+ partnerLuIsPlu(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates which LU is the PLU for this session. For
+ independent LUs, the PLU (primary LU) is the one that initiated
+ the session (sent BIND), while the SLU (secondary LU) is the
+ one that accepted the session initiation (received BIND).
+
+ The 'local' LU is the one identified by appcLluOperName.
+
+ The 'partner' LU is the one identified by
+ appcLuPairOperParLuName."
+
+ ::= { appcActSessEntry 6 }
+
+appcActSessModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode name used for this session."
+
+ ::= { appcActSessEntry 7 }
+
+appcActSessCosName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Allen, et. al. Standards Track [Page 78]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ "The Class of Service (COS) name used for this session.
+ A null string indicates that the value is unknown."
+
+ ::= { appcActSessEntry 8 }
+
+appcActSessTransPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ low(2),
+ medium(3),
+ high(4),
+ network(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The transmission priority of this session.
+ 1 = unknown priority
+ 2 = low priority
+ 3 = medium priority
+ 4 = high priority
+ 5 = network priority
+ "
+
+ ::= { appcActSessEntry 9 }
+
+appcActSessEnhanceSecSup OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ level1(2),
+ level2(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Enhanced security supported. Indicates the level of enhanced
+ security support:
+
+ 1 = none
+ 2 = level 1
+ 3 = level 2
+ "
+
+ ::= { appcActSessEntry 10 }
+
+appcActSessSendPacingType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+
+
+
+Allen, et. al. Standards Track [Page 79]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ fixed(2),
+ adaptive(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of pacing being used for sending data."
+
+ ::= { appcActSessEntry 11 }
+
+appcActSessSendRpc OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The send residual pace count. This represents the number of
+ MUs that can still be sent in the current session window."
+
+ ::= { appcActSessEntry 12 }
+
+appcActSessSendNxWndwSize OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size of the next window which will be used to send data."
+
+ ::= { appcActSessEntry 13 }
+
+appcActSessRecvPacingType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ fixed(2),
+ adaptive(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of pacing being used for receiving data."
+
+ ::= { appcActSessEntry 14 }
+
+appcActSessRecvRpc OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The receive residual pace count. This represents the number
+
+
+
+Allen, et. al. Standards Track [Page 80]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ of MUs that can still be received in the current session
+ window."
+
+ ::= { appcActSessEntry 15 }
+
+appcActSessRecvNxWndwSize OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size of the next window which will be used to receive
+ data."
+
+ ::= { appcActSessEntry 16 }
+appcActSessRscv OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The route selection control vector (RSCV CV2B) used for this
+ session. It is present for APPN-level implementations.
+ LEN-level implementations will return a null string. The
+ internal format of this vector is described in SNA Formats.
+ This object contains an uninterpreted copy of the control
+ vector (including the length and key fields)."
+
+ ::= { appcActSessEntry 17 }
+
+appcActSessInUse OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(1),
+ yes(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the session is currently in use (i.e., in
+ bracket with a conversation)."
+
+ ::= { appcActSessEntry 18 }
+
+appcActSessMaxSndRuSize OBJECT-TYPE
+ SYNTAX INTEGER (1..8192)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum RU size used on this session for sending RUs."
+
+
+
+
+Allen, et. al. Standards Track [Page 81]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcActSessEntry 19 }
+
+appcActSessMaxRcvRuSize OBJECT-TYPE
+ SYNTAX INTEGER (1..8192)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum RU size used on this session for receiving RUs."
+
+ ::= { appcActSessEntry 20 }
+
+appcActSessSndPacingSize OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size of the send pacing window on this session."
+
+ ::= { appcActSessEntry 21 }
+
+appcActSessRcvPacingSize OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size of the receive pacing window on this session."
+
+ ::= { appcActSessEntry 22 }
+
+appcActSessOperState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unbound (1),
+ pendingBind (2),
+ bound (3),
+ pendingUnbind (4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value indicates the current operational state of the
+ session.
+
+ 'unbound (1)' - session has been unbound;
+ in this state it will be removed from the
+ session table by the Agent.
+
+ 'pendingBind (2)' - this state has different
+ meanings for dependent and independent LUs;
+
+
+
+Allen, et. al. Standards Track [Page 82]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ for dependent LU - waiting for BIND from
+ the host, for independent LU - waiting for
+ BIND response. When a session enters this
+ state, the corresponding entry in the
+ session table is created by the Agent.
+
+ 'bound (3)' - session has been successfully bound.
+
+ 'pendingUnbind (4)' - session enters this state
+ when an UNBIND is sent and before the
+ rsp(UNBIND) is received.
+
+ Session deactivation:
+
+ If a session is in the operational state
+ 'bound (3)' then setting the value of this
+ object to 'unbound (1)' will initiate the
+ session shutdown.
+
+ If a session is in the operational state
+ 'pendingBind (2)' then setting the value of this
+ object to 'unbound (1)' will initiate the session
+ shutdown.
+
+ If a session is in the operational state
+ 'pendingUnbind (4)' for an abnormally long period
+ of time (e.g., three minutes) then setting the value
+ of this object to 'unbound (1)' will change the
+ session operational state to 'unbound (1)'. "
+
+ ::= { appcActSessEntry 23 }
+
+appcActSessUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The length of time the session has been active, measured in
+ hundredths of a second."
+
+ ::= { appcActSessEntry 24 }
+
+appcActSessRtpNceId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local HPR Network Connection Endpoint of the session."
+
+
+
+Allen, et. al. Standards Track [Page 83]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcActSessEntry 25 }
+
+appcActSessRtpTcid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0|8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local RTP connection TCID of the session."
+
+ ::= { appcActSessEntry 26 }
+
+appcActSessLinkIndex OBJECT-TYPE
+ SYNTAX InstancePointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value identifies the link over which the session passes.
+ This value points to the row in the table containing
+ information on the link instance. (e.g., the sdlcLSAdminTable
+ of the SNA DLC MIB module). This object may be NULL if the
+ link is not specified or if a link is not applicable (as for
+ APPN-level nodes)."
+
+ ::= { appcActSessEntry 27 }
+
+
+-- ***************************************************************
+-- The following table contains session statistics for APPC sessions.
+-- ***************************************************************
+
+appcSessStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcSessStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains dynamic statistical information relating
+ to active APPC sessions. The entries in this table cannot be
+ created by a Management Station. Two entries are present in
+ the table when both session partners are local. This table is
+ populated only when the value of appcCntrlOperStat is
+ 'active'."
+
+ ::= { appcSession 2 }
+
+appcSessStatsEntry OBJECT-TYPE
+ SYNTAX AppcSessStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+
+
+Allen, et. al. Standards Track [Page 84]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ DESCRIPTION
+ "Contains statistics information for an APPC session. Each
+ entry is created by the Agent. Objects in this table have
+ read-only access. Each session from appcActSessTable has one
+ entry in this table."
+
+ INDEX { appcSessStatsLocLuName,
+ appcSessStatsParLuName,
+ appcSessStatsSessIndex }
+
+ ::= { appcSessStatsTable 1 }
+
+AppcSessStatsEntry ::= SEQUENCE {
+ appcSessStatsLocLuName DisplayString,
+ appcSessStatsParLuName DisplayString,
+ appcSessStatsSessIndex Integer32,
+ appcSessStatsSentFmdBytes Counter32,
+ appcSessStatsSentNonFmdBytes Counter32,
+ appcSessStatsRcvdFmdBytes Counter32,
+ appcSessStatsRcvdNonFmdBytes Counter32,
+ appcSessStatsSentFmdRus Counter32,
+ appcSessStatsSentNonFmdRus Counter32,
+ appcSessStatsRcvdFmdRus Counter32,
+ appcSessStatsRcvdNonFmdRus Counter32,
+ appcSessStatsCtrUpTime TimeTicks
+ }
+
+appcSessStatsLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the local LU for the session. This
+ field is from 1 to 17 characters in length, including a period
+ (.) which separates the NetId from the NAU name if the NetId is
+ present.
+
+ If this object has the same value as appcLluOperName, then the
+ two entries being indexed apply to the same resource
+ (specifically, to the same local LU)."
+
+ ::= { appcSessStatsEntry 1 }
+
+appcSessStatsParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+
+
+Allen, et. al. Standards Track [Page 85]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ "Specifies the name of the partner LU for the session. This
+ field is from 1 to 17 characters in length, including a period
+ (.) which separates the NetId from the NAU name if the NetId is
+ present.
+
+ If this object has the same value as appcLuPairOperParLuName,
+ then the two entries being indexed apply to the same resource
+ (specifically, to the same partner LU)."
+
+ ::= { appcSessStatsEntry 2 }
+
+appcSessStatsSessIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This value identifies the index of the session, which is
+ unique for this LU pair. It is recommended that an Agent not
+ reuse the index of a deactivated session for a significant
+ period of time (e.g., one week).
+
+ If this object has the same value as appcActSessIndex for the
+ same LU pair, then the two entries being indexed apply to the
+ same resource (specifically, to the same session)."
+
+ ::= { appcSessStatsEntry 3 }
+
+appcSessStatsSentFmdBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of function management data (FMD) bytes sent by the
+ local LU."
+
+ ::= { appcSessStatsEntry 4 }
+
+appcSessStatsSentNonFmdBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of non-function management data (non-FMD) bytes
+ sent by the local LU."
+
+ ::= { appcSessStatsEntry 5 }
+
+appcSessStatsRcvdFmdBytes OBJECT-TYPE
+
+
+
+Allen, et. al. Standards Track [Page 86]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of function management data (FMD) bytes received by
+ the local LU."
+
+ ::= { appcSessStatsEntry 6 }
+
+appcSessStatsRcvdNonFmdBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of non-function management data (non-FMD) bytes
+ received by the local LU."
+
+ ::= { appcSessStatsEntry 7 }
+
+appcSessStatsSentFmdRus OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of function management data (FMD) RUs sent by the
+ local LU."
+
+ ::= { appcSessStatsEntry 8 }
+
+appcSessStatsSentNonFmdRus OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of non-function management data (non-FMD) RUs sent
+ by the local LU."
+
+ ::= { appcSessStatsEntry 9 }
+
+appcSessStatsRcvdFmdRus OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of function management data (FMD) RUs received by
+ the local LU."
+
+ ::= { appcSessStatsEntry 10 }
+
+
+
+Allen, et. al. Standards Track [Page 87]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcSessStatsRcvdNonFmdRus OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of non-function management data (non-FMD) RUs
+ received by the local LU."
+
+ ::= { appcSessStatsEntry 11 }
+
+appcSessStatsCtrUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The length of time the counters for this session have been
+ active, measured in hundredths of a second."
+
+ ::= { appcSessStatsEntry 12 }
+
+
+-- *********************************************************************
+-- APPC Historical Session Table
+-- ---------------------------------------------------------------------
+-- This table contains historical information about APPC sessions that
+-- terminated abnormally. It is an implementation choice how long to
+-- retain information on a given session.
+-- *********************************************************************
+appcHistSessTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcHistSessEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table of historical information about APPC sessions that
+ terminated abnormally. Two entries may be present in the table
+ when both session partners are local. It is an implementation
+ choice how long to retain information about a given session."
+
+ ::= { appcSession 3 }
+
+appcHistSessEntry OBJECT-TYPE
+ SYNTAX AppcHistSessEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of APPC Session History Table. This table is indexed by
+ an integer which is continuously incremented until it
+ eventually wraps."
+
+
+
+Allen, et. al. Standards Track [Page 88]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ INDEX
+ { appcHistSessIndex }
+
+ ::= { appcHistSessTable 1 }
+
+AppcHistSessEntry ::= SEQUENCE {
+ appcHistSessIndex INTEGER,
+ appcHistSessTime DateAndTime,
+ appcHistSessType INTEGER,
+ appcHistSessLocLuName DisplayString,
+ appcHistSessParLuName DisplayString,
+ appcHistSessModeName DisplayString,
+ appcHistSessUnbindType OCTET STRING,
+ appcHistSessSenseData SnaSenseData,
+ appcHistSessComponentId DisplayString,
+ appcHistSessDetectModule DisplayString
+ }
+
+
+appcHistSessIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table index. The value of the index begins at zero
+ and is incremented up to a maximum value of 2**31-1
+ (2,147,483,647) before wrapping."
+
+ ::= { appcHistSessEntry 1 }
+
+appcHistSessTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time at which the session was either terminated or
+ failed to be established."
+
+ ::= { appcHistSessEntry 2 }
+
+appcHistSessType OBJECT-TYPE
+ SYNTAX INTEGER {
+ recvNegBindRsp(1),
+ sendNegBindRsp(2),
+ sessActRejected(3),
+ unbindSent(4),
+ unbindReceived(5)
+ }
+
+
+
+Allen, et. al. Standards Track [Page 89]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the type of event that caused the entry to be made:
+
+ recvNegBindRsp - Received a negative bind response from
+ the partner LU.
+ sendNegBindRsp - Sent a negative bind response to the
+ partner LU.
+ sessActRejected - Session activation rejected by the
+ partner LU.
+ unbindSent - Unbind sent to the partner LU.
+ unbindReceived - Unbind received from the partner LU.
+
+ These event types correspond to the five SNA/MS Alerts
+ LU62001 through LU62005, documented in the SNA Management
+ Services Reference."
+
+ ::= { appcHistSessEntry 3 }
+
+appcHistSessLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network-qualified local LU name. This field is from 3 to
+ 17 characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present."
+
+ ::= { appcHistSessEntry 4 }
+
+appcHistSessParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (3..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network-qualified partner LU name. This field is from 3
+ to 17 characters in length, including a period (.) which
+ separates the NetId from the NAU name if the NetId is present."
+
+ ::= { appcHistSessEntry 5 }
+
+appcHistSessModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode name of the session."
+
+
+
+Allen, et. al. Standards Track [Page 90]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcHistSessEntry 6 }
+
+appcHistSessUnbindType OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of unbind which terminated the session. This
+ value is consists of one (1) octet; and its meaning
+ is defined in SNA Formats."
+
+ ::= { appcHistSessEntry 7 }
+
+appcHistSessSenseData OBJECT-TYPE
+ SYNTAX SnaSenseData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sense data associated with the termination of the
+ session, taken from the negative BIND response or UNBIND
+ request."
+
+ ::= { appcHistSessEntry 8 }
+
+appcHistSessComponentId OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The implementation-specific name of the component which
+ detected the problem."
+
+ ::= { appcHistSessEntry 9 }
+
+appcHistSessDetectModule OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The implementation-specific name of the module which
+ detected the problem."
+
+ ::= { appcHistSessEntry 10 }
+
+
+-- *********************************************************************
+-- APPC Session RTP Connection Table
+-- ---------------------------------------------------------------------
+
+
+
+Allen, et. al. Standards Track [Page 91]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+-- This table contains information on APPC sessions that are being
+-- transported on RTP connections by High Performance Routing (HPR).
+-- *********************************************************************
+appcSessRtpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcSessRtpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table indicating how many APPC sessions terminating in this
+ node are transported by each RTP connection."
+
+ ::= { appcSession 4 }
+
+appcSessRtpEntry OBJECT-TYPE
+ SYNTAX AppcSessRtpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of APPC session RTP table."
+
+ INDEX { appcSessRtpNceId,
+ appcSessRtpTcid }
+
+ ::= { appcSessRtpTable 1 }
+
+AppcSessRtpEntry ::= SEQUENCE {
+ appcSessRtpNceId OCTET STRING,
+ appcSessRtpTcid OCTET STRING,
+ appcSessRtpSessions Gauge32
+ }
+
+appcSessRtpNceId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..8))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The local Network Connection Endpoint of the RTP connection."
+
+ ::= { appcSessRtpEntry 1 }
+
+appcSessRtpTcid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The local TCID of the RTP connection."
+
+ ::= { appcSessRtpEntry 2 }
+
+
+
+Allen, et. al. Standards Track [Page 92]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcSessRtpSessions OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of APPC sessions terminating in this node
+ that are using this RTP connection."
+
+ ::= { appcSessRtpEntry 3 }
+
+
+-- *********************************************************************
+-- APPC Active Conversation Table
+-- This table contains information about active APPC conversations.
+-- *********************************************************************
+
+appcActiveConvTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcActiveConvEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table of information about active APPC Conversations. In this
+ context 'active' means that a conversation is currently
+ associated with a particular session. Two entries are present
+ in the table when both LUs for the session are local."
+
+ ::= { appcConversation 1 }
+
+appcActiveConvEntry OBJECT-TYPE
+ SYNTAX AppcActiveConvEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry representing one active APPC Conversation."
+
+ INDEX { appcActiveConvLocLuName,
+ appcActiveConvParLuName,
+ appcActiveConvSessIndex }
+
+ ::= { appcActiveConvTable 1}
+
+AppcActiveConvEntry ::= SEQUENCE {
+ appcActiveConvLocLuName DisplayString,
+ appcActiveConvParLuName DisplayString,
+ appcActiveConvSessIndex Integer32,
+ appcActiveConvId OCTET STRING,
+ appcActiveConvState INTEGER,
+ appcActiveConvType INTEGER,
+
+
+
+Allen, et. al. Standards Track [Page 93]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ appcActiveConvCorrelator OCTET STRING,
+ appcActiveConvSyncLvl INTEGER,
+ appcActiveConvSource INTEGER,
+ appcActiveConvDuplex INTEGER,
+ appcActiveConvUpTime TimeTicks,
+ appcActiveConvSendBytes Counter32,
+ appcActiveConvRcvBytes Counter32,
+ appcActiveConvUserid DisplayString,
+ appcActiveConvPcidNauName DisplayString,
+ appcActiveConvPcid OCTET STRING,
+ appcActiveConvModeName DisplayString,
+ appcActiveConvLuwIdName DisplayString,
+ appcActiveConvLuwIdInstance OCTET STRING,
+ appcActiveConvLuwIdSequence OCTET STRING,
+ appcActiveConvTpName DisplayString
+ }
+
+appcActiveConvLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU for the conversation. This field
+ is from 1 to 17 characters in length, including a period (.)
+ which separates the NetId from the NAU name if the NetId is
+ present.
+
+ If this object has the same value as appcLluOperName,
+ then the two entries being indexed apply to the same
+ resource (specifically, to the same local LU)."
+
+ ::= { appcActiveConvEntry 1 }
+
+appcActiveConvParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU for the conversation. This
+ field is from 1 to 17 characters in length, including a period
+ (.) which separates the NetId from the NAU name if the NetId is
+ present.
+
+ If this object has the same value as appcLuPairOperParLuName,
+ then the two entries being indexed apply to the same
+ resource (specifically, to the same partner LU)."
+
+ ::= { appcActiveConvEntry 2 }
+
+
+
+Allen, et. al. Standards Track [Page 94]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcActiveConvSessIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index of entry in appcActSessTable that is associated with
+ this conversation. If this object has the same value as
+ appcActSessIndex for the same LU pair, then the two entries
+ being indexed apply to the same resource (specifically, to the
+ same session)."
+
+ ::= { appcActiveConvEntry 3 }
+
+appcActiveConvId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (4))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 4-byte ID of the conversation."
+
+ ::= { appcActiveConvEntry 4 }
+
+appcActiveConvState OBJECT-TYPE
+ SYNTAX INTEGER {
+ reset(1),
+ send(2),
+ receive(3),
+ confirm(4),
+ confirmSend(5),
+ confirmDealloc(6),
+ pendingDeallocate(7),
+ pendingPost(8),
+ sendReceive(9),
+ sendOnly(10),
+ receiveOnly(11),
+ deferReceive(12),
+ deferDeallocate(13),
+ syncpoint(14),
+ syncpointSend(15),
+ syncpointDeallocate(16),
+ backoutRequired(17)
+ }
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the state of the conversation at the instant when
+ the information was retrieved. The values are:
+
+
+
+Allen, et. al. Standards Track [Page 95]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ reset
+ The conversation is reset (i.e., deallocated).
+ send
+ The conversation can send data. This value also
+ is returned if the conversation is in
+ Send-Pending state.
+ receive
+ The conversation can receive data.
+ confirm
+ The conversation has received a confirm
+ indicator. It can issue an [MC_]CONFIRMED or
+ [MC_]SEND_ERROR verb to change state. It will
+ continue in Receive state if an [MC_]CONFIRMED
+ verb is issued.
+ confirmSend
+ The conversation is in Confirm state and changes
+ to Send state when an [MC_]CONFIRMED verb is
+ issued.
+ confirmDealloc
+ The conversation is in Confirm state and becomes
+ inactive when an [MC_]CONFIRMED verb is issued.
+ pendingDeallocate
+ The conversation is in Pending-Deallocate state
+ while it waits for (MC_)DEALLOCATE TYPE
+ (sync_level) to complete.
+ pendingPost
+ The conversation is in Pending-Post state while
+ it waits for the [MC_]RECEIVE_AND_POST verb to
+ complete its receive function.
+ sendReceive
+ The full-duplex conversation can send or receive
+ data.
+ sendOnly
+ The full-duplex conversation can send data, but
+ it does not have permission to receive data,
+ because the partner TP has already deallocated
+ its side of the conversation.
+ receiveOnly
+ The full-duplex conversation can receive data,
+ but it does not have permission to send data,
+ because it has already deallocated its side of
+ the conversation.
+ deferReceive
+ Waiting for a successful SYNCPT verb operation to
+ go into the receive state.
+ deferDeallocate
+ Waiting for a successful SYNCPT verb operation to
+ go into the reset state.
+
+
+
+Allen, et. al. Standards Track [Page 96]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ syncpoint
+ Need to response to a SYNCPT verb issued. After
+ successful operation, the next state will be
+ receive.
+ syncpointSend
+ Need to response to a SYNCPT verb issued. After
+ successful operation, the next state will be
+ send.
+ syncpointDeallocate
+ Need to response to a SYNCPT verb issued. After
+ successful operation, the next state will be
+ reset.
+ backoutRequired
+ TP must execute a BACKOUT verb to backout the
+ transaction."
+
+ ::= { appcActiveConvEntry 5 }
+
+appcActiveConvType OBJECT-TYPE
+ SYNTAX INTEGER {
+ basic(1),
+ mapped(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the type of conversation. The values are:
+
+ basic
+ Indicates that this conversation supports
+ basic verbs.
+
+ mapped
+ Indicates that this conversation supports
+ mapped verbs."
+
+
+ ::= { appcActiveConvEntry 6 }
+
+appcActiveConvCorrelator OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is an 8-byte identifier that the source LU assigns to the
+ conversation; the source LU is the one that sent the allocation
+ request. The conversation correlator is included on the
+ allocation request. The conversation correlator uniquely
+
+
+
+Allen, et. al. Standards Track [Page 97]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ identifies a conversation, from among all conversations,
+ between the local and partner LUs. It may be used, for
+ example, during problem determination associated with a
+ conversation. A length of 0 indicates that no conversation
+ correlator is defined."
+
+ ::= { appcActiveConvEntry 7 }
+
+appcActiveConvSyncLvl OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ confirm(2),
+ syncpt(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the highest sync level support for the conversation.
+ The values are:
+
+ none
+ Indicates that no sync-level processing can be
+ performed on this conversation. The
+ transaction program does not issue verbs or
+ recognize any returned parameters
+ relating to any sync-level function.
+
+ confirm
+ Indicates that confirmation processing can be
+ performed on this conversation. The
+ transaction program can issue verbs and
+ recognize returned parameters relating to
+ confirmation.
+
+ syncpt
+ Indicates that syncpt and confirmation processing
+ can be performed on this conversation. The
+ transaction program can issue verbs and recognize
+ returned parameters relating to syncpt and
+ confirmation."
+
+ ::= { appcActiveConvEntry 8 }
+
+appcActiveConvSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ localLu(1),
+ partnerLu(2)
+ }
+
+
+
+Allen, et. al. Standards Track [Page 98]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the local or partner LU is the source of the
+ conversation, that is, which LU started the conversation by
+ sending the allocation request.
+
+ localLu
+ The local LU is the source of the conversation,
+ and the partner LU is the target of the
+ conversation.
+
+ partnerLu
+ The partner LU is the source of the
+ conversation, and the local LU is the target of
+ the conversation."
+
+ ::= { appcActiveConvEntry 9 }
+
+appcActiveConvDuplex OBJECT-TYPE
+ SYNTAX INTEGER {
+ half(1),
+ full(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the conversation duplex style in effect for the
+ conversation.
+
+ half Indicates that information can be transferred in
+ both directions, but only in one direction at a
+ time.
+
+ full Indicates that information can be transferred in
+ both directions at the same time."
+
+ ::= { appcActiveConvEntry 10 }
+
+appcActiveConvUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The length of time since the conversation started, measured in
+ hundredths of a second."
+
+ ::= { appcActiveConvEntry 11 }
+
+
+
+Allen, et. al. Standards Track [Page 99]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcActiveConvSendBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of bytes that was sent on the
+ conversation. The count includes all SNA RU bytes sent,
+ including those in the FMH-5 (Attach), FMH-7 (Error
+ Description), SIGNAL, LUSTAT, and SNA responses; it does not
+ include SNA TH and RH bytes."
+
+ ::= { appcActiveConvEntry 12 }
+
+appcActiveConvRcvBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of bytes that was received on the
+ conversation. The count includes all SNA RU bytes sent,
+ including those in the FMH-5 (Attach), FMH-7 (Error
+ Description), SIGNAL, LUSTAT, and SNA responses; it does not
+ include SNA TH and RH bytes."
+
+ ::= { appcActiveConvEntry 13 }
+
+appcActiveConvUserid OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The user ID that the initiating program provided in the
+ incoming attach."
+
+ ::= { appcActiveConvEntry 14 }
+
+appcActiveConvPcidNauName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0 | 3..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network-qualified NAU name of the
+ node at which the session and PCID originated. For APPN
+ and LEN nodes, this is either CP name of the APPN node at
+ which the origin LU is located or the CP name of the
+ NN serving the LEN node at which the origin LU is
+ located. This field is from 3 to 17 characters in
+ length, including a period (.) which separates the
+
+
+
+Allen, et. al. Standards Track [Page 100]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ NetId from the NAU name. A null string indicates
+ that the value is unknown."
+
+ ::= { appcActiveConvEntry 15 }
+
+appcActiveConvPcid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0|8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The procedure correlation identifier (PCID) of the session.
+ It is an 8-octet value assigned by the control point providing
+ session services for the primary LU. A null string indicates
+ that the value is unknown."
+
+ ::= { appcActiveConvEntry 16 }
+
+appcActiveConvModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Mode Name used for this conversation.
+ This is a 1-8 character name."
+
+ ::= { appcActiveConvEntry 17 }
+
+appcActiveConvLuwIdName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the LU that initiated the logical unit of work
+ that is associated with this active TP. This field is from
+ 1 to 17 characters in length, including a period (.) which
+ separates the NetId from the LU name if the NetId is present."
+
+ ::= { appcActiveConvEntry 18 }
+
+appcActiveConvLuwIdInstance OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The instance identifier for the logical unit of work."
+
+ ::= { appcActiveConvEntry 19 }
+
+
+
+
+Allen, et. al. Standards Track [Page 101]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcActiveConvLuwIdSequence OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..2))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence identifier for the logical unit of work."
+
+ ::= { appcActiveConvEntry 20 }
+
+appcActiveConvTpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The transaction program name which started this conversation.
+ This name could either be from a FMH5 ATTACH for a remotely
+ started conversation, otherwise it could the name of the local
+ TP if available.
+
+ When the TP name consists entirely of displayable EBCDIC code
+ points, it is mapped directly to the equivalent ASCII display
+ string. However, registered TP names always have a non-
+ displayable EBCDIC code point (value less than or equal to
+ x'3F') as the first character, so they cannot be directly
+ mapped to an ASCII display string. These TP names are
+ converted to a display string that is equivalent to a
+ hexadecimal display of the EBCDIC code points. For example,
+ the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+ ASCII display string '06F1' (including the two single quotes).
+
+ This name is NULL if the conversation is started locally
+ (i.e., not with a FMH5 ATTACH)."
+
+ ::= { appcActiveConvEntry 21 }
+
+-- *********************************************************************
+-- APPC Historical Conversation Table
+-- This table contains historical information about APPC
+-- conversations that ended abnormally. It is an implementation
+-- choice how long to retain information on a given conversation.
+-- *********************************************************************
+
+appcHistConvTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcHistConvEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table of historical information about APPC Conversations that
+
+
+
+Allen, et. al. Standards Track [Page 102]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ended in error. Possible categories of error conditions that
+ could be saved in this table are:
+
+ - allocation errors,
+ - deallocate abend,
+ - program errors, and
+ - service errors."
+
+ ::= { appcConversation 2 }
+
+appcHistConvEntry OBJECT-TYPE
+ SYNTAX AppcHistConvEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry representing one APPC Conversation."
+
+ INDEX
+ { appcHistConvIndex }
+
+ ::= { appcHistConvTable 1}
+
+AppcHistConvEntry ::= SEQUENCE {
+ appcHistConvIndex Integer32,
+ appcHistConvEndTime DateAndTime,
+ appcHistConvLocLuName DisplayString,
+ appcHistConvParLuName DisplayString,
+ appcHistConvTpName DisplayString,
+ appcHistConvPcidNauName DisplayString,
+ appcHistConvPcid OCTET STRING,
+ appcHistConvSenseData SnaSenseData,
+ appcHistConvLogData OCTET STRING,
+ appcHistConvEndedBy INTEGER
+ }
+
+appcHistConvIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index for entry in Conversation table. This value identifies
+ the unique index of the conversation. It is recommended that
+ an Agent not reuse the index of a deactivated conversation for
+ a significant period of time (e.g. one week)."
+
+ ::= { appcHistConvEntry 1 }
+
+appcHistConvEndTime OBJECT-TYPE
+
+
+
+Allen, et. al. Standards Track [Page 103]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time at which the conversation ended."
+
+ ::= { appcHistConvEntry 2 }
+
+appcHistConvLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name of the local LU for this conversation. This field is
+ from 1 to 17 characters in length, including a period (.) which
+ separates the NetId from the NAU name if the NetId is present."
+
+ ::= { appcHistConvEntry 3 }
+
+appcHistConvParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU for the conversation. This
+ field is from 1 to 17 characters in length, including a period
+ (.) which separates the NetId from the NAU name if the NetId is
+ present."
+
+ ::= { appcHistConvEntry 4 }
+
+appcHistConvTpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The transaction program name which started this conversation.
+ This name could either be from a FMH5 ATTACH for a remotely
+ started conversation, otherwise it could the name of the local
+ TP if available.
+
+ When the TP name consists entirely of displayable EBCDIC code
+ points, it is mapped directly to the equivalent ASCII display
+ string. However, registered TP names always have a non-
+ displayable EBCDIC code point (value less than or equal to
+ x'3F') as the first character, so they cannot be directly
+ mapped to an ASCII display string. These TP names are
+ converted to a display string that is equivalent to a
+
+
+
+Allen, et. al. Standards Track [Page 104]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ hexadecimal display of the EBCDIC code points. For example,
+ the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
+ ASCII display string '06F1' (including the two single quotes).
+
+ This name is NULL if the conversation is started locally
+ (i.e., not with a FMH5 ATTACH)."
+
+ ::= { appcHistConvEntry 5 }
+
+appcHistConvPcidNauName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0 | 3..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network-qualified NAU name of the
+ node at which the session and PCID originated. For APPN
+ and LEN nodes, this is either CP name of the APPN node at
+ which the origin LU is located or the CP name of the
+ NN serving the LEN node at which the origin LU is
+ located. This field is from 3 to 17 characters in
+ length, including a period (.) which separates the
+ NetId from the NAU name. A null string indicates that the
+ value is unknown."
+
+ ::= { appcHistConvEntry 6 }
+
+appcHistConvPcid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0|8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The procedure correlation identifier (PCID) of the session.
+ It is an 8-octet value assigned by the control point providing
+ session services for the primary LU. A null string indicates
+ that the value is unknown."
+
+ ::= { appcHistConvEntry 7 }
+
+appcHistConvSenseData OBJECT-TYPE
+ SYNTAX SnaSenseData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sense data associated with the action that ended this
+ conversation, e.g., FMH-7 or UNBIND."
+
+ ::= { appcHistConvEntry 8 }
+
+
+
+
+Allen, et. al. Standards Track [Page 105]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcHistConvLogData OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The first 32 bytes of the data portion of the Log Data GDS
+ Variable that is associated with the last FMH-7 that occurred
+ on this conversation. If there was no Log Data GDS Variable
+ associated with the FMH-7, this object is null.
+
+ This object reflects only the data portion of the Log Data
+ GDS Variable (i.e. not the LL or GDS Id)."
+
+ ::= { appcHistConvEntry 9 }
+
+appcHistConvEndedBy OBJECT-TYPE
+ SYNTAX INTEGER {
+ localLu(1),
+ partnerLu(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates which LU ended the conversation."
+
+ ::= { appcHistConvEntry 10 }
+
+-- *********************************************************************
+-- APPC CPIC Admin Table
+-- Objects in this table contain default or expected configuration
+-- values for CPI-C side information.
+-- *********************************************************************
+appcCpicAdminTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcCpicAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "APPC CPI-C side information table."
+
+ ::= { appcCPIC 1 }
+
+appcCpicAdminEntry OBJECT-TYPE
+ SYNTAX AppcCpicAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of APPC CPI-C side information Table."
+
+
+
+
+Allen, et. al. Standards Track [Page 106]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ INDEX { appcCpicAdminLocLuName,
+ appcCpicAdminSymbDestName }
+
+ ::= { appcCpicAdminTable 1 }
+
+AppcCpicAdminEntry ::= SEQUENCE {
+ appcCpicAdminLocLuName DisplayString,
+ appcCpicAdminSymbDestName DisplayString,
+ appcCpicAdminParLuAlias DisplayString,
+ appcCpicAdminParLuName DisplayString,
+ appcCpicAdminModeName DisplayString,
+ appcCpicAdminTpNameType INTEGER,
+ appcCpicAdminTpName DisplayString,
+ appcCpicAdminUserid DisplayString,
+ appcCpicAdminSecurity INTEGER
+ }
+
+appcCpicAdminLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU to which this CPI-C side
+ information definition applies. This field is from 1 to 17
+ characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present.
+
+ The reserved value '*ALL' indicates that the definition applies
+ to all local LUs, and not just to a single local LU."
+
+ ::= { appcCpicAdminEntry 1 }
+
+appcCpicAdminSymbDestName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the symbolic destination name used by CPI-C
+ applications to identify this definition."
+
+ ::= { appcCpicAdminEntry 2 }
+
+appcCpicAdminParLuAlias OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A local alias for the partner LU. If not known or
+
+
+
+Allen, et. al. Standards Track [Page 107]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ not applicable, this object contains a zero-length
+ string."
+
+ ::= { appcCpicAdminEntry 3 }
+
+
+appcCpicAdminParLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU. This field is from 1 to 17
+ characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present."
+
+ ::= { appcCpicAdminEntry 4 }
+
+
+appcCpicAdminModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the mode name. A mode defines the characteristics
+ for a group of sessions. The mode name can be blank (8 space
+ characters)."
+
+ ::= { appcCpicAdminEntry 5 }
+
+
+appcCpicAdminTpNameType OBJECT-TYPE
+ SYNTAX INTEGER {
+ normal(1),
+ snaServiceTp(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the TP name in appcCpicAdminTpName
+ identifies a normal TP or an SNA service TP. In this context,
+ a normal TP is one with a name consisting only of displayable
+ characters, while an SNA service TP has a name containing
+ octets that do not map to displayable characters."
+
+ ::= { appcCpicAdminEntry 6 }
+
+appcCpicAdminTpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+
+
+
+Allen, et. al. Standards Track [Page 108]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the partner TP to be used when a CPI-C
+ application initiates a conversation specifying this side
+ information entry.
+
+ Display convention
+
+ When the TP name consists entirely of displayable EBCDIC
+ code points, it is mapped directly to the equivalent ASCII
+ display string. However, registered TP names always have a
+ non-displayable EBCDIC code point (value less than or equal
+ to x'3F') as the first character, so they cannot be
+ directly mapped to an ASCII display string. These TP names
+ are converted to a display string that is equivalent to a
+ hexadecimal display of the EBCDIC code points. For
+ example, the 2-byte TP name x'06F1' (CNOS) is converted to
+ the 6-byte ASCII display string '06F1' (including the two
+ single quotes)."
+
+ ::= { appcCpicAdminEntry 7 }
+
+appcCpicAdminUserid OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The security userid, if any, associated with the side
+ information definition."
+
+ ::= { appcCpicAdminEntry 8 }
+
+appcCpicAdminSecurity OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ same(2),
+ pgm(3),
+ pgmStrong(4),
+ distributed(5),
+ mutual(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the security information to be used for allocating
+ the conversation.
+
+
+
+
+Allen, et. al. Standards Track [Page 109]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ none - No security information.
+ same - Use the security environment currently
+ associated with this TP.
+ pgm - Use the program-supplied user_id and password.
+ pgmStrong - Use the program-supplied user_id and password.
+ The local LU will insure that the password is
+ not exposed in clear-text form on the physical
+ network.
+ distributed - Use the security environment and a distributed
+ security system to generate the authentication
+ information for this request. If distributed
+ security tokens cannot be generated, then fail
+ the conversation.
+ mutual - Authenticate both the user to the destination
+ system and the destination system to the user."
+
+ ::= { appcCpicAdminEntry 9 }
+
+
+-- *********************************************************************
+-- APPC CPIC Oper Table
+-- Objects in this table contain current operational values, such
+-- as state values or negotiated parameters, for CPI-C side
+-- information.
+-- *********************************************************************
+
+appcCpicOperTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppcCpicOperEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "APPC CPI-C side information operational table."
+
+ ::= { appcCPIC 2 }
+
+appcCpicOperEntry OBJECT-TYPE
+ SYNTAX AppcCpicOperEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of APPC CPI-C side information Table."
+
+ INDEX { appcCpicOperLocLuName,
+ appcCpicOperSymbDestName }
+
+ ::= { appcCpicOperTable 1 }
+
+
+
+
+
+Allen, et. al. Standards Track [Page 110]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+AppcCpicOperEntry ::= SEQUENCE {
+ appcCpicOperLocLuName DisplayString,
+ appcCpicOperSymbDestName DisplayString,
+ appcCpicOperParLuAlias DisplayString,
+ appcCpicOperParLuName DisplayString,
+ appcCpicOperModeName DisplayString,
+ appcCpicOperTpNameType INTEGER,
+ appcCpicOperTpName DisplayString,
+ appcCpicOperUserid DisplayString,
+ appcCpicOperSecurity INTEGER
+ }
+
+appcCpicOperLocLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the local LU to which this CPI-C side
+ information definition applies. This field is from 1 to 17
+ characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present.
+
+ The reserved value '*ALL' indicates that the definition applies
+ to all local LUs, and not just to a single local LU."
+
+ ::= { appcCpicOperEntry 1 }
+
+appcCpicOperSymbDestName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the symbolic destination name used by CPI-C
+ applications to identify this definition."
+
+ ::= { appcCpicOperEntry 2 }
+
+appcCpicOperParLuAlias OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A local alias for the partner LU. If not known or not
+ applicable, this object contains a zero-length string."
+
+ ::= { appcCpicOperEntry 3 }
+
+appcCpicOperParLuName OBJECT-TYPE
+
+
+
+Allen, et. al. Standards Track [Page 111]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The SNA name of the partner LU. This field is from 1 to 17
+ characters in length, including a period (.) which separates
+ the NetId from the NAU name if the NetId is present."
+
+ ::= { appcCpicOperEntry 4 }
+
+
+appcCpicOperModeName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the mode name. A mode defines the characteristics
+ for a group of sessions. The mode name can be blank (8 space
+ characters)."
+
+ ::= { appcCpicOperEntry 5 }
+
+
+appcCpicOperTpNameType OBJECT-TYPE
+ SYNTAX INTEGER {
+ normal(1),
+ snaServiceTp(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether the TP name in appcCpicOperTpName identifies
+ a normal TP or an SNA service TP. In this context, a normal TP
+ is one with a name consisting only of displayable characters,
+ while an SNA service TP has a name containing octets that do
+ not map to displayable characters."
+
+ ::= { appcCpicOperEntry 6 }
+
+appcCpicOperTpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the name of the partner TP to be used when a CPI-C
+ application initiates a conversation specifying this side
+ information entry.
+
+
+
+
+Allen, et. al. Standards Track [Page 112]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ Display convention
+
+ When the TP name consists entirely of displayable EBCDIC
+ code points, it is mapped directly to the equivalent ASCII
+ display string. However, registered TP names always have
+ a non-displayable EBCDIC code point (value less than or
+ equal to x'3F') as the first character, so they cannot be
+ directly mapped to an ASCII display string. These TP
+ names are converted to a display string that is equivalent
+ to a hexadecimal display of the EBCDIC code points. For
+ example, the 2-byte TP name x'06F1' (CNOS) is converted to
+ the 6-byte ASCII display string '06F1' (including the two
+ single quotes)."
+
+ ::= { appcCpicOperEntry 7 }
+
+appcCpicOperUserid OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The security userid, if any, associated with the active side
+ information definition."
+
+ ::= { appcCpicOperEntry 8 }
+
+appcCpicOperSecurity OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ same(2),
+ pgm(3),
+ pgmStrong(4),
+ distributed(5),
+ mutual(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the security information to be used for allocating
+ the conversation.
+
+ none - No security information.
+ same - Use the security environment currently
+ associated with this TP.
+ pgm - Use the program-supplied user_id and password.
+ pgmStrong - Use the program-supplied user_id and password.
+ The local LU will insure that the password is
+ not exposed in clear-text form on the physical
+
+
+
+Allen, et. al. Standards Track [Page 113]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ network.
+ distributed - Use the security environment and a distributed
+ security system to generate the authentication
+ information for this request. If distributed
+ security tokens cannot be generated, then fail
+ the conversation.
+ mutual - Authenticate both the user to the destination
+ system and the destination system to the user."
+
+ ::= { appcCpicOperEntry 9 }
+
+
+-- ***************************************************************
+-- Conformance information
+-- ***************************************************************
+
+appcConformance OBJECT IDENTIFIER ::= {appcMIB 2 }
+
+appcCompliances OBJECT IDENTIFIER ::= {appcConformance 1 }
+appcGroups OBJECT IDENTIFIER ::= {appcConformance 2 }
+
+-- Compliance statements
+appcCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the SNMPv2 entities which
+ implement the APPC MIB."
+
+ MODULE -- this module
+
+-- Unconditionally mandatory groups
+ MANDATORY-GROUPS {
+ appcGlobalConfGroup,
+ appcLluConfGroup,
+ appcParLuConfGroup,
+ appcModeConfGroup,
+ appcTpConfGroup,
+ appcSessionConfGroup
+ }
+
+-- Conditionally mandatory groups
+ GROUP appcControlConfGroup
+ DESCRIPTION
+ "The appcControlConfGroup is mandatory only for those
+ entities which implement activation and deactivation of
+ specific controls such as statistics collecting and
+ counting."
+
+
+
+
+Allen, et. al. Standards Track [Page 114]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ GROUP appcCnosConfGroup
+ DESCRIPTION
+ "The appcCnosConfGroup is mandatory only for those entities
+ which implement CNOS. "
+
+ GROUP appcCpicConfGroup
+ DESCRIPTION
+ "The appcCpicConfGroup is mandatory only for those entities
+ which implement CPI-C. "
+
+
+ GROUP appcConversationConfGroup
+ DESCRIPTION
+ "The appcConversationConfGroup is mandatory only for those
+ entities which implement session endpoints for non-control
+ APPC sessions."
+
+-- MIN-ACCESS for objects
+ OBJECT appcActSessOperState
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "An implementation is not required to support session
+ deactivation via this object."
+
+ ::= {appcCompliances 1 }
+
+-- Units of conformance
+appcGlobalConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcUpTime,
+ appcDefaultModeName,
+ appcDefaultLuName,
+ appcDefaultImplInbndPlu,
+ appcDefaultMaxMcLlSndSize,
+ appcDefaultFileSpec,
+ appcDefaultTpOperation,
+ appcDefaultTpConvSecRqd,
+ appcLocalCpName,
+ appcActiveSessions,
+ appcActiveHprSessions
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ global information and defaults."
+
+ ::= { appcGroups 1 }
+
+
+
+
+Allen, et. al. Standards Track [Page 115]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcLluConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcLluAdminDepType,
+ appcLluAdminLocalAddress,
+ appcLluAdminSessLimit,
+ appcLluAdminBindRspMayQ,
+ appcLluAdminCompression,
+ appcLluAdminInBoundCompLevel,
+ appcLluAdminOutBoundCompLevel,
+ appcLluAdminCompRleBeforeLZ,
+ appcLluAdminAlias,
+
+ appcLluOperDepType,
+ appcLluOperLocalAddress,
+ appcLluOperSessLimit,
+ appcLluOperBindRspMayQ,
+ appcLluOperCompression,
+ appcLluOperInBoundCompLevel,
+ appcLluOperOutBoundCompLevel,
+ appcLluOperCompRleBeforeLZ,
+ appcLluOperAlias,
+ appcLluOperActiveSessions
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ local LU6.2s."
+
+ ::= { appcGroups 2 }
+
+appcParLuConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcLuPairAdminParLuAlias,
+ appcLuPairAdminSessLimit,
+ appcLuPairAdminSessSec,
+ appcLuPairAdminSecAccept,
+ appcLuPairAdminLinkObjId,
+ appcLuPairAdminParaSessSup,
+
+ appcLuPairOperParLuAlias,
+ appcLuPairOperSessLimit,
+ appcLuPairOperSessSec,
+ appcLuPairOperSecAccept,
+ appcLuPairOperLinkObjId,
+ appcLuPairOperParaSessSup,
+ appcLuPairOperParaSessSupLS,
+ appcLuPairOperState
+ }
+
+
+
+Allen, et. al. Standards Track [Page 116]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ partner LUs."
+
+ ::= { appcGroups 3 }
+
+appcModeConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcModeAdminCosName,
+ appcModeAdminSessEndTpName,
+ appcModeAdminMaxSessLimit,
+ appcModeAdminMinCwinLimit,
+ appcModeAdminMinClosLimit,
+ appcModeAdminConWinAutoActLmt,
+ appcModeAdminRecvPacWinSz,
+ appcModeAdminSendPacWinSz,
+ appcModeAdminPrefRecvRuSz,
+
+ appcModeAdminPrefSendRuSz,
+ appcModeAdminRecvRuSzUpBnd,
+ appcModeAdminSendRuSzUpBnd,
+ appcModeAdminRecvRuSzLoBnd,
+ appcModeAdminSendRuSzLoBnd,
+ appcModeAdminSingSessReinit,
+ appcModeAdminCompression,
+ appcModeAdminInBoundCompLevel,
+ appcModeAdminOutBoundCompLevel,
+ appcModeAdminCompRleBeforeLZ,
+ appcModeAdminSyncLvl,
+ appcModeAdminCrypto,
+
+ appcModeOperCosName,
+ appcModeOperSessEndTpName,
+ appcModeOperSessLimit,
+ appcModeOperMaxSessLimit,
+ appcModeOperMinCwinLimit,
+ appcModeOperMinClosLimit,
+ appcModeOperConWinAutoActLmt,
+ appcModeOperRecvPacWinSz,
+ appcModeOperSendPacWinSz,
+ appcModeOperPrefRecvRuSz,
+ appcModeOperPrefSendRuSz,
+ appcModeOperRecvRuSzUpBnd,
+ appcModeOperSendRuSzUpBnd,
+ appcModeOperRecvRuSzLoBnd,
+ appcModeOperSendRuSzLoBnd,
+ appcModeOperSingSessReinit,
+
+
+
+Allen, et. al. Standards Track [Page 117]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ appcModeOperCompression,
+ appcModeOperInBoundCompLevel,
+ appcModeOperOutBoundCompLevel,
+ appcModeOperCompRleBeforeLZ,
+ appcModeOperSyncLvl,
+ appcModeOperCrypto,
+ appcModeOperSyncLvlLastStart,
+ appcModeOperCryptoLastStart,
+ appcModeOperCNOSNeg,
+ appcModeOperActCwin,
+ appcModeOperActClos,
+ appcModeOperPndCwin,
+ appcModeOperPndClos,
+ appcModeOperPtmCwin,
+ appcModeOperPtmClos,
+ appcModeOperDrainSelf,
+ appcModeOperDrainPart
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ modes."
+
+ ::= { appcGroups 4 }
+
+appcTpConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcTpAdminFileSpec,
+ appcTpAdminStartParm,
+ appcTpAdminTpOperation,
+ appcTpAdminInAttachTimeout,
+ appcTpAdminRcvAllocTimeout,
+ appcTpAdminSyncLvl,
+ appcTpAdminInstLmt,
+ appcTpAdminStatus,
+ appcTpAdminLongRun,
+ appcTpAdminConvType,
+ appcTpAdminConvDuplex,
+ appcTpAdminConvSecReq,
+ appcTpAdminVerPip,
+ appcTpAdminPipSubNum
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ Transaction Programs."
+
+ ::= { appcGroups 5 }
+
+
+
+Allen, et. al. Standards Track [Page 118]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+appcSessionConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcActSessPcidCpName,
+ appcActSessPcid,
+ appcActSessPluIndicator,
+ appcActSessModeName,
+ appcActSessCosName,
+ appcActSessTransPriority,
+ appcActSessEnhanceSecSup,
+ appcActSessSendPacingType,
+ appcActSessSendRpc,
+ appcActSessSendNxWndwSize,
+ appcActSessRecvPacingType,
+ appcActSessRecvRpc,
+ appcActSessRecvNxWndwSize,
+ appcActSessRscv,
+ appcActSessInUse,
+ appcActSessMaxSndRuSize,
+ appcActSessMaxRcvRuSize,
+ appcActSessSndPacingSize,
+ appcActSessRcvPacingSize,
+ appcActSessOperState,
+ appcActSessUpTime,
+ appcActSessRtpNceId,
+ appcActSessRtpTcid,
+ appcActSessLinkIndex,
+
+ appcSessStatsSentFmdBytes,
+ appcSessStatsSentNonFmdBytes,
+ appcSessStatsRcvdFmdBytes,
+ appcSessStatsRcvdNonFmdBytes,
+ appcSessStatsSentFmdRus,
+ appcSessStatsSentNonFmdRus,
+ appcSessStatsRcvdFmdRus,
+ appcSessStatsRcvdNonFmdRus,
+ appcSessStatsCtrUpTime,
+
+ appcHistSessTime,
+ appcHistSessType,
+ appcHistSessLocLuName,
+ appcHistSessParLuName,
+ appcHistSessModeName,
+ appcHistSessUnbindType,
+ appcHistSessSenseData,
+ appcHistSessComponentId,
+ appcHistSessDetectModule,
+
+ appcSessRtpSessions
+
+
+
+Allen, et. al. Standards Track [Page 119]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ LU6.2 sessions."
+
+ ::= { appcGroups 6 }
+
+appcControlConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcCntrlAdminStat,
+ appcCntrlAdminRscv,
+ appcCntrlAdminTrace,
+ appcCntrlAdminTraceParm,
+ appcCntrlOperStat,
+ appcCntrlOperStatTime,
+ appcCntrlOperRscv,
+ appcCntrlOperRscvTime,
+ appcCntrlOperTrace,
+ appcCntrlOperTraceTime,
+ appcCntrlOperTraceParm
+
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ control."
+
+ ::= { appcGroups 7 }
+
+appcCnosConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcCnosCommand,
+ appcCnosMaxSessLimit,
+ appcCnosMinCwinLimit,
+ appcCnosMinClosLimit,
+ appcCnosDrainSelf,
+ appcCnosDrainPart,
+ appcCnosResponsible,
+ appcCnosForce,
+ appcCnosTargetLocLuName,
+ appcCnosTargetParLuName,
+ appcCnosTargetModeName
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ CNOS processing."
+
+
+
+Allen, et. al. Standards Track [Page 120]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ ::= { appcGroups 8 }
+
+appcCpicConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcCpicAdminParLuAlias,
+ appcCpicAdminParLuName,
+ appcCpicAdminModeName,
+ appcCpicAdminTpNameType,
+ appcCpicAdminTpName,
+ appcCpicAdminUserid,
+ appcCpicAdminSecurity,
+ appcCpicOperParLuAlias,
+ appcCpicOperParLuName,
+ appcCpicOperModeName,
+ appcCpicOperTpNameType,
+ appcCpicOperTpName,
+ appcCpicOperUserid,
+ appcCpicOperSecurity
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ CPI-C side information."
+
+ ::= { appcGroups 9 }
+
+appcConversationConfGroup OBJECT-GROUP
+ OBJECTS {
+ appcActiveConvId,
+ appcActiveConvState,
+ appcActiveConvType,
+ appcActiveConvCorrelator,
+ appcActiveConvSyncLvl,
+ appcActiveConvSource,
+ appcActiveConvDuplex,
+ appcActiveConvUpTime,
+ appcActiveConvSendBytes,
+ appcActiveConvRcvBytes,
+ appcActiveConvUserid,
+ appcActiveConvPcidNauName,
+ appcActiveConvPcid,
+ appcActiveConvModeName,
+ appcActiveConvLuwIdName,
+ appcActiveConvLuwIdInstance,
+ appcActiveConvLuwIdSequence,
+ appcActiveConvTpName,
+
+ appcHistConvEndTime,
+
+
+
+Allen, et. al. Standards Track [Page 121]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+ appcHistConvLocLuName,
+ appcHistConvParLuName,
+ appcHistConvTpName,
+ appcHistConvPcidNauName,
+ appcHistConvPcid,
+ appcHistConvSenseData,
+ appcHistConvLogData,
+ appcHistConvEndedBy
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of APPC
+ conversations."
+
+ ::= { appcGroups 10 }
+
+-- end of conformance statement
+
+END
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Allen, et. al. Standards Track [Page 122]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+5. Acknowledgments
+
+ This MIB module is the product of the SNA NAU MIB Working Group.
+ Special thanks to Wayne Clark, Cisco Systems; Rich Daugherty, IBM
+ Corporation; and Leo Temoshenko, IBM Corporation, for their
+ contributions and review.
+
+6. References
+
+[1] IBM, Systems Network Architecture Technical Overview, GC30-3073-4,
+ January, 1994.
+
+[2] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
+ Waldbusser, "Structure of Management Information for version 2 of
+ the Simple Network Management Protocol (SNMPv2)", RFC 1902, January
+ 1996.
+
+[3] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
+ Waldbusser, "Textual Conventions for Version 2 of the Simple
+ Network Management Protocol (SNMPv2)", RFC 1903, January 1996.
+
+[4] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
+ Waldbusser, "Conformance Statements for Version 2 of the Simple
+ Network Management Protocol (SNMPv2)", RFC 1904, January 1996.
+
+[5] IBM, Systems Network Architecture Transaction Programmer's
+ Reference for LU Type 6.2, GC30-3084-05, June, 1993.
+
+[6] IBM, Common Programming Interface Communications Specification 2.0,
+ SC31-6180-01, June, 1994.
+
+[7] Kielczewski, Z., Kostick D., and K. Shih, "Definition of Managed
+ Objects for SNA NAUs using SMIv2", RFC 1666, Eicon Technology
+ Corporation, Bell Communications Research, Novell, August 1994.
+
+7. Security Considerations
+
+ Security issues are not discussed in this memo.
+
+
+
+
+
+
+
+
+
+
+
+
+
+Allen, et. al. Standards Track [Page 123]
+
+RFC 2051 SNANAU APPC MIB using SMIv2 October 1996
+
+
+8. Authors' Addresses
+
+ Michael Allen
+ Wall Data Inc.
+ P.O.Box 1120, WA 98019, USA
+
+ Phone: +1 206 844 3505
+ EMail: mallen@hq.walldata.com
+
+
+ Bob Clouston
+ Cisco Systems
+ 7025 Kit Creek Road
+ PO Box 14987
+ Research Triangle Park, NC 27709, USA
+
+ Phone: +1 919 472 2333
+ EMail: clouston@cisco.com
+
+
+ Zbigniew Kielczewski
+ Cisco Systems
+ 7025 Kit Creek Road
+ PO Box 14987
+ Research Triangle Park, NC 27709, USA
+
+ Phone: +1 919 472 2326
+ EMail: zbig@cisco.com
+
+
+ William Kwan
+ Jupiter Technology Inc.
+ 200 Prospect St.
+ Waltham, MA 02254
+
+ Phone: 1 617 894-9300 x423
+ EMail: billk@jti.com
+
+
+ Bob Moore
+ IBM Corporation
+ 800 Park Offices Drive
+ E87/664
+ P.O. Box 12195
+ Research Triangle Park, NC 27709, USA
+
+ Phone: 1 919 254 4436
+ EMail: remoore@ralvm6.vnet.ibm.com
+
+
+
+Allen, et. al. Standards Track [Page 124]
+