summaryrefslogtreecommitdiff
path: root/doc/rfc/rfc2155.txt
diff options
context:
space:
mode:
authorThomas Voss <mail@thomasvoss.com> 2024-11-27 20:54:24 +0100
committerThomas Voss <mail@thomasvoss.com> 2024-11-27 20:54:24 +0100
commit4bfd864f10b68b71482b35c818559068ef8d5797 (patch)
treee3989f47a7994642eb325063d46e8f08ffa681dc /doc/rfc/rfc2155.txt
parentea76e11061bda059ae9f9ad130a9895cc85607db (diff)
doc: Add RFC documents
Diffstat (limited to 'doc/rfc/rfc2155.txt')
-rw-r--r--doc/rfc/rfc2155.txt6947
1 files changed, 6947 insertions, 0 deletions
diff --git a/doc/rfc/rfc2155.txt b/doc/rfc/rfc2155.txt
new file mode 100644
index 0000000..43ac0a3
--- /dev/null
+++ b/doc/rfc/rfc2155.txt
@@ -0,0 +1,6947 @@
+
+
+
+
+
+
+Network Working Group B. Clouston
+Request for Comments: 2155 Cisco Systems
+Category: Standards Track B. Moore
+ IBM Corporation
+ June 1997
+
+
+ Definitions of Managed Objects
+ for APPN using SMIv2
+
+Status of this Memo
+
+ This document specifies an Internet standards track protocol for the
+ Internet community, and requests discussion and suggestions for
+ improvements. Please refer to the current edition of the "Internet
+ Official Protocol Standards" (STD 1) for the standardization state
+ and status of this protocol. Distribution of this memo is unlimited.
+
+Table of Contents
+
+ 1. Introduction ........................................... 1
+ 2. The SNMPv2 Network Management Framework ................ 1
+ 3. Overview ............................................... 2
+ 3.1 APPN MIB structure .................................... 4
+ 4. Definitions ............................................ 9
+ 5. Acknowledgments ........................................ 122
+ 6. References ............................................. 122
+ 7. Security Considerations ................................ 123
+ 8. Author's Addresses ..................................... 124
+
+1. Introduction
+
+ This memo defines a portion of the Management Information Base (MIB)
+ for use with network management protocols in the Internet community.
+ In particular, it defines objects for monitoring and controlling
+ network devices with APPN (Advanced Peer-to-Peer Networking)
+ capabilities. This memo identifies managed objects for the APPN
+ protocol.
+
+2. The SNMPv2 Network Management Framework
+
+ The SNMP Network Management Framework consists of several components.
+ For the purpose of this specification, the applicable components of
+ the Framework are the SMI and related documents [1, 2, 3], which
+ define the mechanisms used for describing and naming objects for the
+ purpose of management.
+
+
+
+
+
+Clouston & Moore Standards Track [Page 1]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ The Framework permits new objects to be defined for the purpose of
+ experimentation and evaluation.
+
+3. Overview
+
+ This document identifies a set of objects for monitoring the
+ configuration and active characteristics of devices with APPN
+ capabilities, and for controlling certain characteristics. APPN is
+ the aspect of Systems Network Architecture (SNA) that supports peer-
+ to-peer networking. These networks transport both independent and
+ dependent LU session traffic. See the SNANAU APPC MIB [7] and the
+ SNA NAU MIB [8] for management of these sessions. See also the DLUR
+ MIB[9], and the HPR MIB[10] for management of extensions to the APPN
+ architecture. In this document, we describe APPN managed objects.
+
+ An APPN network comprises various types of nodes, and transmission
+ groups (TGs) that connect the nodes. Network nodes (NNs) provide
+ directory and routing functions for session establishment. NNs may
+ be session end points or intermediate nodes in a session. A border
+ node is a type of network node that connects networks together for
+ session establishment without fully merging them. End nodes (ENs)
+ are session end points that receive directory and routing functions
+ from network nodes, over control-point to control-point (CP-CP)
+ sessions. Low-entry networking (LEN) nodes are also session end
+ points, but do not support CP-CP sessions, and therefore need
+ additional manual configuration definitions to establish sessions in
+ an APPN network. ENs and LEN nodes may have minimal directory and
+ routing functions to establish control sessions (ENs) or to connect
+ into the APPN network (LEN nodes). Virtual routing nodes (VRNs) are
+ not really nodes, but rather common definitions among actual nodes in
+ a shared transport facility such as a local area network (LAN) that
+ allow these actual nodes to temporarily establish a logical link with
+ one another without defining each other's link-level addressing
+ information.
+
+ Ports and link stations are the node's interface to the data link
+ control (DLC), which provides the physical transport, or to another
+ protocol such as Data Link Switching (DLSw), which provides transport
+ over an IP network. See the SNADLC SDLC MIB[11], the SNADLC LLC
+ MIB[12], and the DLSw MIB[13]. A link station uses a port to make a
+ connection to another node. This connection establishes a TG between
+ the two nodes.
+
+
+
+
+
+
+
+
+
+Clouston & Moore Standards Track [Page 2]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ The directory and routing functions enable an NN to find where an LU
+ is located in the network, and calculate the optimal route for the
+ session based on the requested class of service (COS). A network
+ node saves the LU information in a directory database, which is built
+ from LUs defined locally, LU registration from served end nodes, and
+ LUs learned from network searches.
+
+ Each NN maintains a local COS database that assigns a routing weight,
+ or relative cost, to each resource for each class of service. For
+ example, the #INTER COS assigns a lower weight to TGs with a greater
+ effective capacity, while the #BATCH COS favors TGs with a lower
+ relative cost per byte.
+
+ A node saves network topology information (on NNs, VRNs, and TGs
+ between them) in a network topology database. The topology
+ information includes state and routing characteristics. Topology
+ information is exchanged between NNs over CP-CP sessions such that
+ the database is fully replicated at each NN. Information on TGs from
+ NNs to ENs are kept in a local topology database. Local topology
+ information is shared with other NNs only during the session
+ establishment process, to give the NN responsible for route
+ calculation the necessary information for end-to- end route
+ calculation.
+
+ SNA names such as LU names, CP names, COS names, and mode names can
+ be padded with blanks (space characters) in SNA formats. These
+ blanks are nonsignificant. For example, in a BIND Request Unit (RU)
+ a COS name of "#INTER" with a length of 6 is identical to a COS name
+ of "#INTER " with a length of 8. However, in this MIB,
+ nonsignificant blanks are not included by the agent. Using the COS
+ name from the previous example, an agent would return a length of 6
+ and the string "#INTER" with no blanks for appnCosName, regardless of
+ how it appears in the BIND RU or in internal storage. The lone
+ exception is the all blank mode name, for which the agent returns a
+ length of 8 and the string " " (8 blank spaces). The MIB
+ variables that this applies to are identified by a textual convention
+ syntax that also describes this behavior.
+
+ When an SNA name is functioning as a table index, an agent treats
+ trailing blanks as significant. If a management station requests the
+ objects from a row with index "#INTER ", the agent does not match
+ this to the row with index "#INTER". Since an agent has no
+ nonsignificant blanks in any of its table indices, the only reason
+ for a Management Station to include them would be to start GetNext
+ processing at a chosen point in a table. For example, a GetNext
+ request with index "M " would start retrieval from a table at
+ the first row with an 8-character index beginning with "M" or a
+ letter after "M".
+
+
+
+Clouston & Moore Standards Track [Page 3]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ The SNA/APPN terms and overall architecture are documented in [4],
+ [5], [6], and [14].
+
+ Highlights of the management functions supported by the APPN MIB
+ module include the following:
+
+ o Activating and deactivating ports and link stations.
+
+ o Monitoring of configuration parameters related to the node,
+ ports, link stations, virtual routing nodes, and classes of
+ service.
+
+ o Monitoring of operational parameters related to ports, link
+ stations, virtual routing nodes, topology, directory, and
+ intermediate sessions.
+
+ o Historical information about link station errors during
+ connection establishment, or that caused the connection to
+ terminate.
+
+ o Deactivating intermediate sessions.
+
+ o Traps for SNA Management Services (SNA/MS) Alert conditions.
+
+ This MIB module does not support:
+
+ o Configuration of APPN nodes.
+
+ o Monitoring and control of endpoint sessions.
+
+ o Dependent LU Requester (DLUR) management.
+
+ o High-Performance Routing (HPR) management.
+
+3.1. APPN MIB Structure
+
+ The APPN MIB module contains the following groups of objects:
+
+
+ o appnNode - objects related to the APPN node for all node types.
+
+ o appnNn - objects to represent the network nodes, virtual
+ routing nodes, and TGs between these nodes that make up the APPN
+ network topology database maintained in NNs.
+
+ o appnLocalTopology - objects to represent nodes and TGs between
+ nodes in the local topology database maintained in all nodes.
+
+
+
+
+Clouston & Moore Standards Track [Page 4]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ o appnDir - objects related to LU location information from the
+ node's directory database.
+
+ o appnCos - objects related to classes of service information.
+
+ o appnSessIntermediate - objects related to intermediate sessions
+ that pass through this node.
+
+ These groups are described below in more detail.
+
+3.1.1. appnNode group
+
+ The appnNode group consists of the following tables and objects:
+
+ 1) appnGeneralInfoAndCaps
+
+ This group of objects describes general information about the APPN
+ node. The type of information includes the node type and the time
+ since this node was initialized.
+
+ 2) appnNnUniqueInfoAndCaps
+
+ This group of objects describes information specific to network nodes
+ such as node routing characteristics.
+
+ 3) appnEnUniqueInfoAndCaps
+
+ This group of objects describes information specific to end nodes,
+ including its network node server.
+
+ 4) appnPortInformation
+
+ This includes the appnPortTable, which describes the configuration
+ and current status of the ports used by APPN, including the port
+ state and DLC type.
+
+ 5) appnLinkStationInformation
+
+ This includes the appnNodeLsTable, which describes the configuration
+ and current status of the link stations used by APPN, including the
+ link state and port name; and the appnLsStatusTable, which provides
+ information about errors this node encountered with connections to
+ adjacent nodes, such as the sense data captured during connection
+ failures. It is a product option to decide how many
+ appnLsStatusTable entries are kept.
+
+
+
+
+
+
+Clouston & Moore Standards Track [Page 5]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ 6) appnVrnInfo
+
+ This includes the appnVrnTable, which describes the relationship
+ between virtual routing nodes' TGs described in the appnLocalTgTable
+ with ports in the appnPortTable.
+
+3.1.2. appnNn group
+
+ The appnNn group consists of the following objects and tables
+
+ 1) appnNnTopo
+
+ These objects contain general information about the network topology
+ database including the number of nodes present, and the number of
+ topology database updates (TDU) wars the node has detected.
+
+ 2) appnNnTopology
+
+ This includes tables representing the APPN network topology database.
+ This includes the network nodes, virtual routing nodes, and TGs
+ between these nodes, as well as the information about these resources
+ carried in topology updates. The tables are first indexed by the
+ same flow reduction sequence number (FRSN) used in topology exchanges
+ between NNs. This allows a management station to retrieve only
+ incremental updates, since the agent will update the FRSN of new or
+ changed resources.
+
+3.1.3. appnLocalTopology group
+
+ The appnLocalTopology group consists of the following objects and
+ tables:
+
+ 1) appnLocalThisNode
+
+ a) appnLocalGeneral
+
+ Contains the local node and type.
+
+ b) appnLocalNnSpecific
+
+ These objects contain routing information about the local network
+ node.
+
+ c) appnLocalTg
+
+ This table represents information about this node's local TGs.
+
+
+
+
+
+Clouston & Moore Standards Track [Page 6]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ 2) appnLocalEnTopology
+
+ This table represents TG information for EN TGs learned by the NN via
+ TG registration with the local node.
+
+3.1.4. appnDir group
+
+ The appnDir group consists of the following objects and tables:
+
+ 1) appnDirPerf
+
+ These objects represent information related to information about the
+ directory database and directory searches involving this node.
+
+ 2) appnDirTable
+
+ This table represents the directory database, listing LUs known to
+ this node, along with the owning node of the LU and the serving NN of
+ the owning node.
+
+3.1.5. appnCos group
+
+ The appnCos group consists of the following tables:
+
+ 1) appnCosModeTable
+
+ This table represents the mode to class of service mapping.
+
+ 2) appnCosNameTable
+
+ This table represents the tranmission priority for each class of
+ service.
+
+ 3) appnCosNodeRowTable
+
+ This table represents the node-row information for each class of
+ service, including the weight of each node.
+
+ 3) appnCosTGRowTable
+
+ This table represents the TG-row information for each class of
+ service, including the weight of each TG.
+
+
+
+
+
+
+
+
+
+Clouston & Moore Standards Track [Page 7]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+3.1.6. appnSessIntermediate group
+
+ The appnSessIntermediate group consists of the following objects and
+ tables:
+
+ 1) appnIsInGlobal
+
+ These objects allow control of the collection of intermediate session
+ information such as Route Selection Control Vectors (RSCVs) and
+ counters.
+
+ 2) appnIsInTable
+
+ This table contains information on active intermediate sessions.
+
+ 3) appnIsRtpTable
+
+ This table contains information on active intermediate sessions that
+ are being transported on Rapid Transport Protocol (RTP) connections
+ by High Performance Routing (HPR).
+
+3.1.7. appnTraps
+
+ One APPN trap is defined. It is intended to correspond to SNA/MS
+ Alerts, but is optional for a product to implement this trap. The
+ trap identifies the Alert ID number and, where possible, the affected
+ resource.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Clouston & Moore Standards Track [Page 8]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+4. Definitions
+
+APPN-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+ IANAifType
+ FROM IANAifType-MIB
+
+ DisplayString, VariablePointer, RowPointer, DateAndTime,
+ TruthValue, TimeStamp, TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+
+ experimental, Counter32, Gauge32, Integer32, Unsigned32,
+ TimeTicks, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+
+ snanauMIB
+ FROM SNA-NAU-MIB;
+
+appnMIB MODULE-IDENTITY
+ LAST-UPDATED "9703201200Z"
+ ORGANIZATION "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
+ CONTACT-INFO
+
+ "
+
+ Bob Clouston
+ Cisco Systems
+ 7025 Kit Creek Road
+ P.O. Box 14987
+ Research Triangle Park, NC 27709, USA
+ Tel: 1 919 472 2333
+ E-mail: clouston@cisco.com
+
+ Bob Moore
+ IBM Corporation
+ 800 Park Offices Drive
+ RHJA/664
+ P.O. Box 12195
+ Research Triangle Park, NC 27709, USA
+ Tel: 1 919 254 4436
+ E-mail: remoore@ralvm6.vnet.ibm.com
+ "
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 9]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "This is the MIB module for objects used to
+ manage network devices with APPN capabilities."
+
+::= { snanauMIB 4 }
+-- snanauMIB ::= { mib-2 34 }
+
+-- *********************************************************************
+-- Textual Conventions
+-- *********************************************************************
+SnaNodeIdentification ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "An SNA Node Identification consists of two parts, which
+ together comprise four bytes of hexadecimal data. In SNA the
+ Node Identification is transported in bytes 2-5 of the XID.
+
+ The block number is the first three digits of the Node
+ Identification. These 3 hexadecimal digits identify the
+ product.
+
+ The ID number is the last 5 digits of the Node Identification.
+ These 5 hexadecimal digits are administratively defined and
+ combined with the 3-digit block number form the 8-digit Node
+ Identification. A unique value is required for connections to
+ SNA subarea. In some implementations, the value 'bbb00000'
+ (where 'bbb' represents a 3-digit block number) is returned to
+ mean that the ID number is not unique on this node.
+
+ An SNA Node Identification is represented as eight
+ ASCII-encoded hexadecimal digits, using the characters '0' -
+ '9' and 'A' - 'F'."
+
+ SYNTAX OCTET STRING (SIZE (8))
+
+SnaControlPointName ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A fully qualified SNA control point name, consisting of a 1 to
+ 8 character network identifier (NetId), a period ('.'), and a 1
+ to 8 character control point name (CpName).
+
+ The NetId and CpName are constructed from the uppercase letters
+ 'A' - 'Z' and the numerics '0' - '9', all encoded in ASCII,
+ with the restriction that the first character of each must be
+ a letter. Trailing blanks are not allowed.
+
+ Earlier versions of SNA permitted three additional characters
+ in NetIds and CpNames: '#', '@', and '$'. While this use of
+
+
+
+Clouston & Moore Standards Track [Page 10]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ these characters has been retired, a Management Station should
+ still accept them for backward compatibility."
+
+ SYNTAX OCTET STRING (SIZE (3..17))
+
+SnaClassOfServiceName ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "An SNA class-of-service (COS) name, ranging from 1 to 8
+ ASCII characters. COS names take one of two forms:
+
+ - a user-defined COS name is constructed from the uppercase
+ letters 'A' - 'Z' and the numerics '0' - '9', with the
+ restriction that the first character of the name must be
+ a letter.
+ - an SNA-defined user-session COS name begins with the
+ character '#', which is followed by up to seven
+ additional characters from the set of uppercase letters
+ and numerics.
+
+ Trailing blanks are not allowed in either form of COS name.
+
+ A zero-length string indicates that a COS name is not
+ available."
+
+ SYNTAX OCTET STRING (SIZE (0..8))
+
+SnaModeName ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "An SNA mode name, ranging from 1 to 8 ASCII characters.
+ Mode names take one of two forms:
+
+ - a user-defined mode name is constructed from the
+ uppercase letters 'A' - 'Z' and the numerics '0' - '9',
+ with the restriction that the first character of the name
+ must be a letter.
+ - an SNA-defined user-session mode name begins with the
+ character '#', which is followed by up to seven
+ additional characters from the set of uppercase letters
+ and numerics.
+
+ Trailing blanks are not allowed in either form of mode name,
+ with the single exception of the all-blank mode name, where
+ a string consisting of 8 blanks is returned.
+
+ A zero-length string indicates that a mode name is not
+ available."
+
+
+
+Clouston & Moore Standards Track [Page 11]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ SYNTAX OCTET STRING (SIZE (0..8))
+
+SnaSenseData ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "To facilitate their display by a Management Station, sense
+ data objects in the MIB are represented as OCTET STRINGS
+ containing eight ASCII characters. Eight '0' characters
+ indicates that no sense data identifying an SNA error
+ condition is available.
+
+ An SNA sense data is represented as eight hexadecimal digits,
+ using the characters '0' - '9' and 'A' - 'F'."
+
+ SYNTAX OCTET STRING (SIZE (8))
+
+DisplayableDlcAddress ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "DLC address of a port or link station, represented as an
+ OCTET STRING containing 0 to 64 ASCII characters.
+ A Management Station should use a value of this type only
+ for display. The 'real' DLC address, i.e., the sequence of
+ bytes that flow in the DLC header, is often available in a
+ DLC-specific MIB.
+
+ The zero-length string indicates that the DLC address in
+ question is not known to the agent."
+
+ SYNTAX OCTET STRING (SIZE (0..64))
+
+AppnNodeCounter ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "An object providing global statistics for the entire APPN
+ node. A Management Station can detect discontinuities in this
+ counter by monitoring the appnNodeCounterDisconTime object."
+
+ SYNTAX Counter32
+
+AppnPortCounter ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "An object providing statistics for an APPN port. A
+ Management Station can detect discontinuities in this counter
+ by monitoring the appnPortCounterDisconTime object."
+
+ SYNTAX Counter32
+
+
+
+Clouston & Moore Standards Track [Page 12]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+AppnLinkStationCounter ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "An object providing statistics for an APPN link station. A
+ Management Station can detect discontinuities in this counter
+ by monitoring the appnLsCounterDisconTime object."
+
+ SYNTAX Counter32
+
+AppnTopologyEntryTimeLeft ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Number of days before deletion of this entry from the topology
+ database. Range is 0-15. A value of 0 indicates that the
+ entry is either in the process of being deleted, or is being
+ marked for deletion at the next garbage collection cycle."
+
+ SYNTAX INTEGER (0..15)
+
+AppnTgDlcData ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "DLC-specific data related to a connection network transmission
+ group. For other TGs, a zero-length string is returned.
+
+ Examples of the type of data returned by an object with this
+ syntax include the following:
+
+ Token-Ring - MAC/SAP
+ X.25 Switched - dial digits
+ X.21 Switched - dial digits
+ Circuit Switch - dial digits
+
+ This MIB does not specify formats for these or any other types
+ of DLC-specific data. Formats may, however, be specified in
+ documents related to a particular DLC.
+
+ The contents of an object with this syntax correspond to the
+ contents of the DLC-specific subfields of cv46, documented in
+ (6)."
+
+ SYNTAX OCTET STRING (SIZE (0..64))
+
+AppnTgEffectiveCapacity ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value representing the effective capacity of a transmission
+ group. This is an administratively assigned value derived from
+
+
+
+Clouston & Moore Standards Track [Page 13]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ the link bandwidth and maximum load factor. It is encoded in
+ the same way as byte 7 of cv47, and represents a floating-point
+ number in units of 300 bits per second."
+
+ SYNTAX OCTET STRING (SIZE (1))
+
+AppnTgSecurity ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value representing the level of security on a transmission
+ group. A class of service definition includes an indication of
+ the acceptable TG security value(s) for that class of service.
+
+ The following seven values are defined:
+
+ nonsecure(1) -
+ (X'01'): none of the values listed below;
+ for example, satellite-connected or
+ located in a nonsecure country
+ publicSwitchedNetwork(32) -
+ (X'20'): public switched network; secure
+ in the sense that there is no
+ predetermined route that traffic will take
+ undergroundCable(64) -
+ (X'40'): underground cable; located in a
+ secure country (as determined by the
+ network administrator)
+ secureConduit(96) -
+ (X'60'): secure conduit, not guarded; for
+ example, pressurized pipe
+ guardedConduit(128) -
+ (X'80'): guarded conduit; protected
+ against physical tapping
+ encrypted(160) -
+ (X'A0'): link-level encryption is provided
+ guardedRadiation(192) -
+ (X'C0'): guarded conduit containing the
+ transmission medium; protected against
+ physical and radiation tapping"
+
+ SYNTAX INTEGER {
+ nonsecure(1), -- X'01'
+ publicSwitchedNetwork(32), -- X'20'
+ undergroundCable(64), -- X'40'
+ secureConduit(96), -- X'60'
+ guardedConduit(128), -- X'80'
+ encrypted(160), -- X'A0'
+ guardedRadiation(192) -- X'C0'
+
+
+
+Clouston & Moore Standards Track [Page 14]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ }
+
+AppnTgDelay ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Relative amount of time that it takes for a signal to travel
+ the length of a logical link. This time is represented in
+ microseconds, using the same encoding scheme used in cv47 in a
+ topology update. Some of the more common values, along with
+ their encoded hex values, are:
+
+ minimum(0), X'00'
+ negligible(384), X'4C'
+ terrestrial(9216), X'71'
+ packet(147456), X'91'
+ long(294912), X'99'
+ maximum(2013265920) X'FF'
+
+ "
+
+ SYNTAX OCTET STRING (SIZE (1))
+
+-- *********************************************************************
+ appnObjects OBJECT IDENTIFIER ::= { appnMIB 1 }
+-- *********************************************************************
+
+-- ******************** The APPN Node Group ****************************
+
+appnNode OBJECT IDENTIFIER ::= { appnObjects 1 }
+ appnGeneralInfoAndCaps OBJECT IDENTIFIER ::= { appnNode 1 }
+ appnNnUniqueInfoAndCaps OBJECT IDENTIFIER ::= { appnNode 2 }
+ appnEnUniqueCaps OBJECT IDENTIFIER ::= { appnNode 3 }
+ appnPortInformation OBJECT IDENTIFIER ::= { appnNode 4 }
+ appnLinkStationInformation OBJECT IDENTIFIER ::= { appnNode 5 }
+ appnVrnInfo OBJECT IDENTIFIER ::= { appnNode 6 }
+
+-- This group provides global information about an APPN network node,
+-- an APPN end node, or an LEN node.
+
+-- The first section applies to all three node types.
+-- The second section applies only to APPN network nodes.
+-- The third section applies only to APPN end nodes and to LEN nodes.
+-- The fourth section applies to all three node types.
+-- The fifth section applies to all three node types.
+-- The sixth section applies only to APPN network nodes.
+
+-- APPN General Information
+-- This section applies to both APPN network and end nodes, and to
+
+
+
+Clouston & Moore Standards Track [Page 15]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+-- LEN end nodes.
+
+appnNodeCpName OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned network name for this node."
+
+ ::= { appnGeneralInfoAndCaps 1 }
+
+appnNodeMibVersion OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (11))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of LAST-UPDATED from this module's MODULE-IDENTITY
+ macro. This object gives a Management Station an easy way of
+ determining the level of the MIB supported by an agent."
+
+ ::= { appnGeneralInfoAndCaps 2 }
+
+appnNodeId OBJECT-TYPE
+ SYNTAX SnaNodeIdentification
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This node's Node Identification, which it sends in bytes
+ 2-5 of XID."
+
+ ::= { appnGeneralInfoAndCaps 3 }
+
+appnNodeType OBJECT-TYPE
+ SYNTAX INTEGER {
+ networkNode(1),
+ endNode(2),
+ t21len(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of APPN node:
+
+ networkNode(1) - APPN network node
+ endNode(2) - APPN end node
+ t21len(4) - LEN end node"
+
+ ::= { appnGeneralInfoAndCaps 4 }
+
+
+
+Clouston & Moore Standards Track [Page 16]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnNodeUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "hundredths of a second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Amount of time (in hundredths of a second) since the APPN node
+ was last re-initialized."
+
+ ::= { appnGeneralInfoAndCaps 5 }
+
+appnNodeParallelTg OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node supports parallel TGs."
+
+ ::= { appnGeneralInfoAndCaps 6 }
+
+appnNodeAdaptiveBindPacing OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node supports adaptive bind pacing for
+ dependent LUs."
+
+ ::= { appnGeneralInfoAndCaps 7 }
+
+appnNodeHprSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ noHprSupport(1),
+ hprBaseOnly(2),
+ rtpTower(3),
+ controlFlowsOverRtpTower(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates this node's level of support for high-performance
+ routing (HPR):
+
+ noHprSupport(1) - no HPR support
+ hprBaseOnly(2) - HPR base (option set 1400)
+ supported
+ rtpTower(3) - HPR base and RTP tower
+ (option set 1401) supported
+
+
+
+Clouston & Moore Standards Track [Page 17]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
+ control flows over RTP
+ (option set 1402) supported
+
+ This object corresponds to cv4580, byte 9, bits 3-4."
+
+ ::= { appnGeneralInfoAndCaps 8 }
+
+appnNodeMaxSessPerRtpConn OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object represents a configuration parameter indicating
+ the maximum number of sessions that the APPN node is to put on
+ any HPR connection. The value is zero if not applicable."
+
+ ::= { appnGeneralInfoAndCaps 9 }
+
+appnNodeHprIntRteSetups OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of HPR route setups received for routes
+ passing through this node since the node was last
+ re-initialized."
+
+ ::= { appnGeneralInfoAndCaps 10 }
+
+appnNodeHprIntRteRejects OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of HPR route setups rejected by this node for
+ routes passing through it since the node was last
+ re-initialized."
+
+ ::= { appnGeneralInfoAndCaps 11 }
+
+appnNodeHprOrgRteSetups OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of HPR route setups sent for routes
+ originating in this node since the node was last
+
+
+
+Clouston & Moore Standards Track [Page 18]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ re-initialized."
+
+ ::= { appnGeneralInfoAndCaps 12 }
+
+appnNodeHprOrgRteRejects OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of HPR route setups rejected by other nodes for
+ routes originating in this node since the node was last
+ re-initialized."
+
+ ::= { appnGeneralInfoAndCaps 13 }
+
+appnNodeHprEndRteSetups OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of HPR route setups received for routes
+ ending in this node since the node was last re-initialized."
+
+ ::= { appnGeneralInfoAndCaps 14 }
+
+appnNodeHprEndRteRejects OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of HPR route setups rejected by this node for
+ routes ending in it since the node was last re-initialized."
+
+ ::= { appnGeneralInfoAndCaps 15 }
+
+appnNodeCounterDisconTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the sysUpTime object the last time the APPN node
+ was re-initialized."
+
+ ::= { appnGeneralInfoAndCaps 16 }
+
+
+-- *********************************************************************
+-- APPN Network Node Information
+
+
+
+Clouston & Moore Standards Track [Page 19]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+-- This section provides global information about an APPN network node.
+
+appnNodeNnCentralDirectory OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node supports central directory
+ services.
+
+ This object corresponds to cv4580, byte 8, bit 1."
+
+ ::= { appnNnUniqueInfoAndCaps 1 }
+
+appnNodeNnTreeCache OBJECT-TYPE
+ SYNTAX INTEGER {
+ noCache(1),
+ cacheNoIncrUpdate(2),
+ cacheWithIncrUpdate(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates this node's level of support for caching of route
+ trees. Three levels are specified:
+
+ noCache(1) - caching of route trees is not
+ supported
+ cacheNoIncrUpdate(2) - caching of route trees is
+ supported, but without incremental
+ updates
+ cacheWithIncrUpdate(3) - caching of route trees with
+ incremental updates is supported"
+
+ ::= { appnNnUniqueInfoAndCaps 2 }
+
+appnNodeNnRouteAddResist OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Route addition resistance.
+
+ This administratively assigned value indicates the relative
+ desirability of using this node for intermediate session
+ traffic. The value, which can be any integer 0-255, is used
+ in route computation. The lower the value, the more
+ desirable the node is for intermediate routing.
+
+
+
+Clouston & Moore Standards Track [Page 20]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ This object corresponds to cv4580, byte 6."
+
+ ::= { appnNnUniqueInfoAndCaps 3 }
+
+appnNodeNnIsr OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node supports intermediate session
+ routing.
+
+ This object corresponds to cv4580, byte 8, bit 2."
+
+ ::= { appnNnUniqueInfoAndCaps 4 }
+
+appnNodeNnFrsn OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last flow-reduction sequence number (FRSN) sent by this
+ node in a topology update to an adjacent network node."
+
+ ::= { appnNnUniqueInfoAndCaps 5 }
+
+appnNodeNnPeriBorderSup OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node has peripheral border node
+ support.
+
+ This object corresponds to cv4580, byte 9, bit 0."
+
+ ::= { appnNnUniqueInfoAndCaps 6 }
+
+appnNodeNnInterchangeSup OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node has interchange node support.
+
+ This object corresponds to cv4580, byte 9, bit 1."
+
+ ::= { appnNnUniqueInfoAndCaps 7 }
+
+
+
+Clouston & Moore Standards Track [Page 21]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnNodeNnExteBorderSup OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node has extended border node support.
+
+ This object corresponds to cv4580, byte 9, bit 2."
+
+ ::= { appnNnUniqueInfoAndCaps 8 }
+
+
+appnNodeNnSafeStoreFreq OBJECT-TYPE
+ SYNTAX INTEGER (0..32767)
+ UNITS "TDUs"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The topology safe store frequency.
+
+ If this number is not zero, then the topology database is saved
+ each time the total number of topology database updates (TDUs)
+ received by this node increases by this number. A value of
+ zero indicates that the topology database is not being saved."
+
+ ::= { appnNnUniqueInfoAndCaps 9 }
+
+appnNodeNnRsn OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Resource sequence number for this node, which it assigns and
+ controls.
+
+ This object corresponds to the numeric value in cv4580, bytes
+ 2-5."
+
+ ::= { appnNnUniqueInfoAndCaps 10 }
+
+appnNodeNnCongested OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node is congested. Other network nodes
+ stop routing traffic to this node while this flag is on.
+
+
+
+
+Clouston & Moore Standards Track [Page 22]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ This object corresponds to cv4580, byte 7, bit 0."
+
+ ::= { appnNnUniqueInfoAndCaps 11 }
+
+appnNodeNnIsrDepleted OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate whether intermediated session routing resources are
+ depleted. Other network nodes stop routing traffic through
+ this node while this flag is on.
+
+ This object corresponds to cv4580, byte 7, bit 1."
+
+ ::= { appnNnUniqueInfoAndCaps 12 }
+
+appnNodeNnQuiescing OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node is quiescing.
+
+ This object corresponds to cv4580, byte 7, bit 5."
+
+ ::= { appnNnUniqueInfoAndCaps 13 }
+
+appnNodeNnGateway OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node has gateway services support.
+
+ This object corresponds to cv4580, byte 8, bit 0."
+
+ ::= { appnNnUniqueInfoAndCaps 14 }
+
+
+-- *********************************************************************
+-- APPN End Node Information
+
+appnNodeEnModeCosMap OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 23]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Indicates whether this end node supports mode name to COS name
+ mapping."
+
+ ::= { appnEnUniqueCaps 1 }
+
+appnNodeEnNnServer OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0 | 3..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The fully qualified name of the current NN server for this end
+ node. An NN server is identified using the format specified in
+ the SnaControlPointName textual convention. The value is a
+ zero-length string when there is no active NN server."
+ ::= { appnEnUniqueCaps 2 }
+
+appnNodeEnLuSearch OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node is to be searched for LUs as part
+ of a network broadcast search."
+
+ ::= { appnEnUniqueCaps 3 }
+
+
+-- *********************************************************************
+-- APPN Port information
+--
+
+appnPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Port table describes the configuration and current status
+ of the ports used by APPN. When it is known to the APPN
+ component, an OBJECT IDENTIFIER pointing to additional
+ information related to the port is included. This may, but
+ need not, be a RowPointer to an ifTable entry for a DLC
+ interface immediately 'below' the port."
+
+ ::= { appnPortInformation 1 }
+
+appnPortEntry OBJECT-TYPE
+ SYNTAX AppnPortEntry
+ MAX-ACCESS not-accessible
+
+
+
+Clouston & Moore Standards Track [Page 24]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ STATUS current
+ DESCRIPTION
+ "The port name is used as the index to this table."
+
+ INDEX
+ { appnPortName }
+
+ ::= { appnPortTable 1 }
+
+AppnPortEntry ::= SEQUENCE {
+ appnPortName DisplayString,
+ appnPortCommand INTEGER,
+ appnPortOperState INTEGER,
+ appnPortDlcType IANAifType,
+ appnPortPortType INTEGER,
+ appnPortSIMRIM TruthValue,
+ appnPortLsRole INTEGER,
+ appnPortNegotLs TruthValue,
+ appnPortDynamicLinkSupport TruthValue,
+ appnPortMaxRcvBtuSize INTEGER,
+ appnPortMaxIframeWindow Gauge32,
+ appnPortDefLsGoodXids AppnPortCounter,
+ appnPortDefLsBadXids AppnPortCounter,
+ appnPortDynLsGoodXids AppnPortCounter,
+ appnPortDynLsBadXids AppnPortCounter,
+ appnPortSpecific RowPointer,
+ appnPortDlcLocalAddr DisplayableDlcAddress,
+ appnPortCounterDisconTime TimeStamp
+ }
+
+appnPortName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..10))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for this APPN port."
+
+ ::= { appnPortEntry 1 }
+
+appnPortCommand OBJECT-TYPE
+ SYNTAX INTEGER {
+ deactivate(1),
+ activate(2),
+ recycle(3),
+ ready(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 25]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "Object by which a Management Station can activate, deactivate,
+ or recycle (i.e., cause to be deactivated and then immediately
+ activated) a port, by setting the value to activate(1),
+ deactivate(2), or recycle(3), respectively. The value ready(4)
+ is returned on GET operations until a SET has been processed;
+ after that the value received on the most recent SET is
+ returned."
+
+ ::= { appnPortEntry 2 }
+
+appnPortOperState OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ pendactive(2),
+ active(3),
+ pendinact(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current state of this port:
+
+ inactive(1) - port is inactive
+ pendactive(2) - port is pending active
+ active(3) - port is active
+ pendinact(4) - port is pending inactive"
+
+
+ ::= { appnPortEntry 3 }
+
+appnPortDlcType OBJECT-TYPE
+ SYNTAX IANAifType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of DLC interface, distinguished according to the
+ protocol immediately 'below' this layer."
+
+ ::= { appnPortEntry 4 }
+
+appnPortPortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ leased(1),
+ switched(2),
+ sharedAccessFacilities(3)
+ }
+ MAX-ACCESS read-only
+
+
+
+Clouston & Moore Standards Track [Page 26]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ STATUS current
+ DESCRIPTION
+ "Identifies the type of line used by this port:
+
+ leased(1) - leased line
+ switched(2) - switched line
+ sharedAccessFacilities(3) - shared access facility, such
+ as a LAN."
+
+ ::= { appnPortEntry 5 }
+
+appnPortSIMRIM OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Set Initialization Mode (SIM) and Receive
+ Initialization Mode (RIM) are supported for this port."
+
+ ::= { appnPortEntry 6 }
+
+appnPortLsRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ primary(1),
+ secondary(2),
+ negotiable(3),
+ abm(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Initial role for link stations activated through this port.
+ The values map to the following settings in the initial XID,
+ where 'ABM' indicates asynchronous balanced mode and 'NRM'
+ indicated normal response mode:
+
+ primary(1): ABM support = 0 ( = NRM)
+ role = 01 ( = primary)
+ secondary(2): ABM support = 0 ( = NRM)
+ role = 00 ( = secondary)
+ negotiable(3): ABM support = 0 ( = NRM)
+ role = 11 ( = negotiable)
+ abm(4): ABM support = 1 ( = ABM)
+ role = 11 ( = negotiable)"
+
+ ::= { appnPortEntry 7 }
+
+appnPortNegotLs OBJECT-TYPE
+
+
+
+Clouston & Moore Standards Track [Page 27]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node supports negotiable link stations
+ for this port."
+
+ ::= { appnPortEntry 8 }
+
+appnPortDynamicLinkSupport OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node allows call-in on this port from
+ nodes not defined locally."
+
+ ::= { appnPortEntry 9 }
+
+appnPortMaxRcvBtuSize OBJECT-TYPE
+ SYNTAX INTEGER (99..32767)
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum Basic Transmission Unit (BTU) size that a link station
+ on this port can receive.
+
+ This object corresponds to bytes 21-22 of XID3."
+
+ ::= { appnPortEntry 10 }
+
+appnPortMaxIframeWindow OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "I-frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum number of I-frames that can be received by the XID
+ sender before an acknowledgement is received."
+
+ ::= { appnPortEntry 11 }
+
+appnPortDefLsGoodXids OBJECT-TYPE
+ SYNTAX AppnPortCounter
+ UNITS "XID exchanges"
+ MAX-ACCESS read-only
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 28]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "The total number of successful XID exchanges that have
+ occurred on all defined link stations on this port since the
+ last time this port was started."
+
+ ::= { appnPortEntry 12 }
+
+appnPortDefLsBadXids OBJECT-TYPE
+ SYNTAX AppnPortCounter
+ UNITS "XID exchanges"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of unsuccessful XID exchanges that have
+ occurred on all defined link stations on this port since the
+ last time this port was started."
+
+ ::= { appnPortEntry 13 }
+
+appnPortDynLsGoodXids OBJECT-TYPE
+ SYNTAX AppnPortCounter
+ UNITS "XID exchanges"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of successful XID exchanges that have
+ occurred on all dynamic link stations on this port since the
+ last time this port was started."
+
+ ::= { appnPortEntry 14 }
+
+appnPortDynLsBadXids OBJECT-TYPE
+ SYNTAX AppnPortCounter
+ UNITS "XID exchanges"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of unsuccessful XID exchanges that have
+ occurred on all dynamic link stations on this port since the
+ last time this port was started."
+
+ ::= { appnPortEntry 15 }
+
+appnPortSpecific OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 29]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Identifies the object, e.g., one in a DLC-specific MIB, that
+ can provide additional information related to this port.
+ If the agent is unable to identify such an object, the value
+ 0.0 is returned."
+
+ ::= { appnPortEntry 16 }
+
+appnPortDlcLocalAddr OBJECT-TYPE
+ SYNTAX DisplayableDlcAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Local DLC address of this port."
+
+ ::= { appnPortEntry 17 }
+
+appnPortCounterDisconTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the sysUpTime object the last time the port was
+ started."
+
+ ::= { appnPortEntry 18 }
+
+-- *********************************************************************
+-- APPN Link Station Information
+--
+
+appnLsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnLsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains detailed information about the link
+ station configuration and its current status."
+
+ ::= { appnLinkStationInformation 1 }
+
+appnLsEntry OBJECT-TYPE
+ SYNTAX AppnLsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is indexed by the link station name."
+
+ INDEX
+
+
+
+Clouston & Moore Standards Track [Page 30]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ { appnLsName }
+
+ ::= { appnLsTable 1 }
+
+AppnLsEntry ::= SEQUENCE {
+ appnLsName DisplayString,
+ appnLsCommand INTEGER,
+ appnLsOperState INTEGER,
+
+ appnLsPortName DisplayString,
+ appnLsDlcType IANAifType,
+ appnLsDynamic TruthValue,
+
+ appnLsAdjCpName OCTET STRING,
+ appnLsAdjNodeType INTEGER,
+ appnLsTgNum INTEGER,
+ appnLsLimResource TruthValue,
+ appnLsActOnDemand TruthValue,
+ appnLsMigration TruthValue,
+ appnLsPartnerNodeId SnaNodeIdentification,
+ appnLsCpCpSessionSupport TruthValue,
+
+ appnLsMaxSendBtuSize INTEGER,
+-- performance data
+ appnLsInXidBytes AppnLinkStationCounter,
+ appnLsInMsgBytes AppnLinkStationCounter,
+ appnLsInXidFrames AppnLinkStationCounter,
+ appnLsInMsgFrames AppnLinkStationCounter,
+ appnLsOutXidBytes AppnLinkStationCounter,
+ appnLsOutMsgBytes AppnLinkStationCounter,
+ appnLsOutXidFrames AppnLinkStationCounter,
+ appnLsOutMsgFrames AppnLinkStationCounter,
+-- propagation delay
+ appnLsEchoRsps AppnLinkStationCounter,
+ appnLsCurrentDelay Gauge32,
+ appnLsMaxDelay Gauge32,
+ appnLsMinDelay Gauge32,
+ appnLsMaxDelayTime DateAndTime,
+-- XID Statistics
+ appnLsGoodXids AppnLinkStationCounter,
+ appnLsBadXids AppnLinkStationCounter,
+-- DLC-specific
+ appnLsSpecific RowPointer,
+ appnLsActiveTime Unsigned32,
+ appnLsCurrentStateTime TimeTicks,
+-- HPR-specific
+ appnLsHprSup INTEGER,
+ appnLsErrRecoSup TruthValue,
+
+
+
+Clouston & Moore Standards Track [Page 31]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnLsForAnrLabel OCTET STRING,
+ appnLsRevAnrLabel OCTET STRING,
+ appnLsCpCpNceId OCTET STRING,
+ appnLsRouteNceId OCTET STRING,
+ appnLsBfNceId OCTET STRING,
+
+ appnLsLocalAddr DisplayableDlcAddress,
+ appnLsRemoteAddr DisplayableDlcAddress,
+ appnLsRemoteLsName DisplayString,
+ appnLsCounterDisconTime TimeStamp
+ }
+
+appnLsName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..10))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for the link station.
+ The name can be from one to ten characters."
+
+ ::= { appnLsEntry 1 }
+
+appnLsCommand OBJECT-TYPE
+ SYNTAX INTEGER {
+ deactivate(1),
+ activate(2),
+ recycle(3),
+ ready(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Object by which a Management Station can activate, deactivate,
+ or recycle (i.e., cause to be deactivated and then immediately
+ reactivated) a link station, by setting the value to
+ activate(1), deactivate(2), or recycle(3), respectively. The
+ value ready(4) is returned on GET operations until a SET has
+ been processed; after that the value received on the most
+ recent SET is returned."
+
+ ::= { appnLsEntry 2 }
+
+appnLsOperState OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ sentConnectOut(2), -- pending active
+ pendXidExch(3), -- pending active
+ sendActAs(4), -- pending active
+
+
+
+Clouston & Moore Standards Track [Page 32]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ sendSetMode(5), -- pending active
+ otherPendingActive(6),-- pending active
+ active(7),
+ sentDeactAsOrd(8), -- pending inactive
+ sentDiscOrd(9), -- pending inactive
+ sentDiscImmed(10), -- pending inactive
+ otherPendingInact(11) -- pending inactive
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "State of this link station. The comments map these more
+ granular states to the 'traditional' four states for SNA
+ resources. Values (2) through (5) represent the normal
+ progression of states when a link station is being activated.
+ Value (6) represents some other state of a link station in
+ the process of being activated. Values (8) through (10)
+ represent different ways a link station can be deactivated.
+ Value (11) represents some other state of a link station in
+ the process of being deactivated."
+
+ ::= { appnLsEntry 3 }
+
+appnLsPortName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for the port associated with
+ this link station. The name can be from one to ten
+ characters."
+
+ ::= { appnLsEntry 4 }
+
+appnLsDlcType OBJECT-TYPE
+ SYNTAX IANAifType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of DLC interface, distinguished according to the
+ protocol immediately 'below' this layer."
+
+ ::= { appnLsEntry 5 }
+
+appnLsDynamic OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 33]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "Identifies whether this is a dynamic link station. Dynamic
+ link stations are created when links that have not been locally
+ defined are established by adjacent nodes."
+
+ ::= { appnLsEntry 6 }
+
+appnLsAdjCpName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0 | 3..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fully qualified name of the adjacent node for this link
+ station. An adjacent node is identified using the format
+ specified in the SnaControlPointName textual convention.
+
+ The value of this object is determined as follows:
+
+ 1. If the adjacent node's name was received on XID, it
+ is returned.
+
+ 2. If the adjacent node's name was not received on XID,
+ but a locally-defined value is available, it is
+ returned.
+
+ 3. Otherwise a string of length 0 is returned, indicating
+ that no name is known for the adjacent node."
+
+ ::= { appnLsEntry 7 }
+
+appnLsAdjNodeType OBJECT-TYPE
+ SYNTAX INTEGER {
+ networkNode(1),
+ endNode(2),
+ t21len(4),
+ unknown(255)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Node type of the adjacent node on this link:
+
+ networkNode(1) - APPN network node
+ endNode(2) - APPN end node
+ t21len(4) - LEN end node
+ unknown(255) - the agent does not know the node type
+ of the adjacent node
+ "
+
+
+
+Clouston & Moore Standards Track [Page 34]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnLsEntry 8 }
+
+appnLsTgNum OBJECT-TYPE
+ SYNTAX INTEGER (0..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number associated with the TG to this link station, with a
+ range from 0 to 256. A value of 256 indicates that the TG
+ number has not been negotiated and is unknown at this time."
+
+ ::= { appnLsEntry 9 }
+
+appnLsLimResource OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the link station is a limited resource. A
+ link station that is a limited resource is deactivated when it
+ is no longer in use."
+
+ ::= { appnLsEntry 10 }
+
+appnLsActOnDemand OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the link station is activatable on demand.
+
+ Such a link station is reported in the topology as active
+ regardless of its actual state, so that it can be considered in
+ route calculations. If the link station is inactive and is
+ chosen for a route, it will be activated at that time."
+
+ ::= { appnLsEntry 11 }
+
+appnLsMigration OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this link station will be used for
+ connections to down-level or migration partners.
+
+ In general, migration nodes do not append their CP names on
+ XID3. Such nodes: (1) will not support parallel TGs, (2)
+
+
+
+Clouston & Moore Standards Track [Page 35]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ should be sent an ACTIVATE PHYSICAL UNIT (ACTPU), provided that
+ the partner supports ACTPUs, and (3) should not be sent
+ segmented BINDs. However, if this node receives an XID3 with
+ an appended CP name, then the partner node will not be treated
+ as a migration node.
+
+ In the case of DYNAMIC TGs this object should be set to 'no'."
+
+ ::= { appnLsEntry 12 }
+
+appnLsPartnerNodeId OBJECT-TYPE
+ SYNTAX SnaNodeIdentification
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The partner's Node Identification, from bytes 2-5 of the XID
+ received from the partner. If this value is not available,
+ then the characters '00000000' are returned."
+
+ ::= { appnLsEntry 13 }
+
+appnLsCpCpSessionSupport OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether CP-CP sessions are supported by this
+ link station. For a dynamic link, this object represents
+ the default ('Admin') value."
+
+ ::= { appnLsEntry 14 }
+
+appnLsMaxSendBtuSize OBJECT-TYPE
+ SYNTAX INTEGER (99..32767)
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Numeric value between 99 and 32767 inclusive indicating the
+ maximum number of bytes in a Basic Transmission Unit (BTU) sent
+ on this link.
+
+ When the link state (returned by the appnLsOperState object) is
+ inactive or pending active, the value configured at this node
+ is returned. When the link state is active, the value that was
+ negotiated for it is returned. This negotiated value is the
+ smaller of the value configured at this node and the partner's
+ maximum receive BTU length, received in XID."
+
+
+
+Clouston & Moore Standards Track [Page 36]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnLsEntry 15 }
+
+appnLsInXidBytes OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of XID bytes received. All of the bytes in the SNA
+ basic transmission unit (BTU), i.e., all of the bytes in the
+ DLC XID Information Field, are counted."
+
+ ::= { appnLsEntry 16 }
+
+appnLsInMsgBytes OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of message (I-frame) bytes received. All of the bytes
+ in the SNA basic transmission unit (BTU), including the
+ transmission header (TH), are counted."
+
+ ::= { appnLsEntry 17 }
+
+appnLsInXidFrames OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "XID frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of XID frames received."
+
+ ::= { appnLsEntry 18 }
+
+appnLsInMsgFrames OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "I-frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of message (I-frame) frames received."
+
+ ::= { appnLsEntry 19 }
+
+appnLsOutXidBytes OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+
+
+
+Clouston & Moore Standards Track [Page 37]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of XID bytes sent. All of the bytes in the SNA basic
+ transmission unit (BTU), i.e., all of the bytes in the DLC XID
+ Information Field, are counted."
+
+ ::= { appnLsEntry 20 }
+
+appnLsOutMsgBytes OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of message (I-frame) bytes sent. All of the bytes
+ in the SNA basic transmission unit (BTU), including the
+ transmission header (TH), are counted."
+
+ ::= { appnLsEntry 21 }
+
+appnLsOutXidFrames OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "XID frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of XID frames sent."
+
+ ::= { appnLsEntry 22 }
+
+appnLsOutMsgFrames OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "I-frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of message (I-frame) frames sent."
+
+ ::= { appnLsEntry 23 }
+
+appnLsEchoRsps OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "echo responses"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 38]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Number of echo responses returned from adjacent link station.
+ A response should be returned for each test frame sent by this
+ node. Test frames are sent to adjacent nodes periodically to
+ verify connectivity and to measure the actual round trip time,
+ that is, the time interval from when the test frame is sent
+ until when the response is received."
+
+
+ ::= { appnLsEntry 24 }
+
+appnLsCurrentDelay OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time that it took for the last test signal to be sent and
+ returned from this link station to the adjacent link station.
+ This time is represented in milliseconds."
+
+ ::= { appnLsEntry 25 }
+
+appnLsMaxDelay OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The longest time it took for a test signal to be sent and
+ returned from this link station to the adjacent link station.
+ This time is represented in milliseconds .
+
+ The value 0 is returned if no test signal has been sent and
+ returned."
+
+ ::= { appnLsEntry 26 }
+
+appnLsMinDelay OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The shortest time it took for a test signal to be sent and
+ returned from this link station to the adjacent link station.
+ This time is represented in milliseconds.
+
+ The value 0 is returned if no test signal has been sent and
+
+
+
+Clouston & Moore Standards Track [Page 39]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ returned."
+
+ ::= { appnLsEntry 27 }
+
+appnLsMaxDelayTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time when the longest delay occurred. This time can be
+ used to identify when this high water mark occurred in relation
+ to other events in the APPN node, for example, the time at
+ which an APPC session was either terminated or failed to be
+ established. This latter time is available in the
+ appcHistSessTime object in the APPC MIB.
+
+ The value 00000000 is returned if no test signal has been sent
+ and returned."
+
+ ::= { appnLsEntry 28 }
+
+appnLsGoodXids OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "XID exchanges"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of successful XID exchanges that have
+ occurred on this link station since the time it was started."
+
+ ::= { appnLsEntry 29 }
+
+appnLsBadXids OBJECT-TYPE
+ SYNTAX AppnLinkStationCounter
+ UNITS "XID exchanges"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of unsuccessful XID exchanges that have
+ occurred on this link station since the time it was started."
+
+ ::= { appnLsEntry 30 }
+
+appnLsSpecific OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 40]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Identifies the object, e.g., one in a DLC-specific MIB, that
+ can provide additional information related to this link
+ station.
+
+ If the agent is unable to identify such an object, the value
+ 0.0 is returned."
+
+ ::= { appnLsEntry 31 }
+
+appnLsActiveTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "hundredths of a second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cumulative amount of time since the node was last re-
+ initialzed, measured in hundredths of a second, that this link
+ station has been in the active state. A zero value indicates
+ that the link station has never been active since the node was
+ last re-initialized."
+
+ ::= { appnLsEntry 32 }
+
+appnLsCurrentStateTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "hundredths of a second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time, measured in hundredths of a second, that
+ the link station has been in its current state."
+
+ ::= { appnLsEntry 33 }
+
+appnLsHprSup OBJECT-TYPE
+ SYNTAX INTEGER {
+ noHprSupport(1),
+ hprBaseOnly(2),
+ rtpTower(3),
+ controlFlowsOverRtpTower(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the level of high performance routing (HPR) support
+ over this link:
+
+ noHprSupport(1) - no HPR support
+
+
+
+Clouston & Moore Standards Track [Page 41]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ hprBaseOnly(2) - HPR base (option set 1400)
+ supported
+ rtpTower(3) - HPR base and RTP tower
+ (option set 1401) supported
+ controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
+ control flows over RTP
+ (option set 1402) supported
+
+ If the link is not active, the defined value is returned."
+
+ ::= { appnLsEntry 34 }
+
+appnLsErrRecoSup OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the link station is supporting
+ HPR link-level error recovery."
+
+ ::= { appnLsEntry 35 }
+
+appnLsForAnrLabel OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The forward Automatic Network Routing (ANR) label for this
+ link station. If the link does not support HPR or the value is
+ unknown, a zero-length string is returned."
+
+ ::= { appnLsEntry 36 }
+
+appnLsRevAnrLabel OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The reverse Automatic Network Routing (ANR) label for this
+ link station. If the link does not support HPR or the value is
+ unknown, a zero-length string is returned."
+
+ ::= { appnLsEntry 37 }
+
+appnLsCpCpNceId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 42]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "The network connection endpoint identifier (NCE ID) for CP-CP
+ sessions if this node supports the HPR transport tower, a
+ zero-length string if the value is unknown or not meaningful
+ for this node."
+
+ ::= { appnLsEntry 38 }
+
+appnLsRouteNceId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network connection endpoint identifier (NCE ID) for Route
+ Setup if this node supports the HPR transport tower, a zero-
+ length string if the value is unknown or not meaningful for
+ this node."
+
+ ::= { appnLsEntry 39 }
+
+appnLsBfNceId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network connection endpoint identifier (NCE ID) for the
+ APPN/HPR boundary function if this node supports the HPR
+ transport tower, a zero-length string if the value is unknown
+ or not meaningful for this node."
+
+ ::= { appnLsEntry 40 }
+
+appnLsLocalAddr OBJECT-TYPE
+ SYNTAX DisplayableDlcAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Local address of this link station."
+
+ ::= { appnLsEntry 41 }
+
+
+appnLsRemoteAddr OBJECT-TYPE
+ SYNTAX DisplayableDlcAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Address of the remote link station on this link."
+
+
+
+Clouston & Moore Standards Track [Page 43]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnLsEntry 42 }
+
+appnLsRemoteLsName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remote link station discovered from the XID exchange.
+ The name can be from one to ten characters. A zero-length
+ string indicates that the value is not known."
+
+ ::= { appnLsEntry 43 }
+
+appnLsCounterDisconTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the sysUpTime object the last time the link
+ station was started."
+
+ ::= { appnLsEntry 44 }
+
+
+
+--********************************************************************
+-- This table provides information about errors this node encountered
+-- with connections to adjacent nodes. Entries are added for exceptional
+-- conditions encountered establishing connections and exceptional
+-- conditions that resulted in termination of a connection. It is an
+-- implementation option how many entries to keep in this table, and
+-- how long to retain any individual entry.
+--********************************************************************
+
+appnLsStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnLsStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains information related to exceptional and
+ potentially exceptional conditions that occurred during the
+ activation, XID exchange, and termination of a connection. No
+ entries are created when these activities proceed normally."
+
+ ::= { appnLinkStationInformation 2 }
+
+appnLsStatusEntry OBJECT-TYPE
+ SYNTAX AppnLsStatusEntry
+
+
+
+Clouston & Moore Standards Track [Page 44]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is indexed by the LsStatusIndex, which is an
+ integer that is continuously updated until it eventually
+ wraps."
+
+ INDEX
+ { appnLsStatusIndex }
+
+ ::= { appnLsStatusTable 1 }
+
+AppnLsStatusEntry ::= SEQUENCE {
+ appnLsStatusIndex INTEGER,
+ appnLsStatusTime DateAndTime,
+ appnLsStatusLsName DisplayString,
+ appnLsStatusCpName DisplayString,
+ appnLsStatusPartnerId SnaNodeIdentification,
+ appnLsStatusTgNum INTEGER,
+ appnLsStatusGeneralSense SnaSenseData,
+ appnLsStatusRetry TruthValue,
+ appnLsStatusEndSense SnaSenseData,
+ appnLsStatusXidLocalSense SnaSenseData,
+ appnLsStatusXidRemoteSense SnaSenseData,
+ appnLsStatusXidByteInError INTEGER,
+ appnLsStatusXidBitInError INTEGER,
+ appnLsStatusDlcType IANAifType,
+ appnLsStatusLocalAddr DisplayableDlcAddress,
+ appnLsStatusRemoteAddr DisplayableDlcAddress
+ }
+
+
+appnLsStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table index. The value of the index begins at zero
+ and is incremented up to a maximum value of 2**31-1
+ (2,147,483,647) before wrapping."
+
+ ::= { appnLsStatusEntry 1 }
+
+appnLsStatusTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 45]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Time when the exception condition occurred. This time can be
+ used to identify when this event occurred in relation to other
+ events in the APPN node, for example, the time at which an APPC
+ session was either terminated or failed to be established.
+ This latter time is available in the appcHistSessTime object in
+ the APPC MIB."
+
+ ::= { appnLsStatusEntry 2 }
+
+appnLsStatusLsName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for the link station
+ experiencing the condition."
+
+ ::= { appnLsStatusEntry 3 }
+
+appnLsStatusCpName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0 | 3..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fully qualified name of the adjacent node for this link
+ station. An adjacent node is identified using the format
+ specified in the SnaControlPointName textual convention.
+
+ The value of this object is determined as follows:
+
+ 1. If the adjacent node's name was received on XID, it
+ is returned.
+
+ 2. If the adjacent node's name was not received on XID,
+ but a locally-defined value is available, it is
+ returned.
+
+ 3. Otherwise a string of length 0 is returned, indicating
+ that no name is known for the adjacent node."
+
+ ::= { appnLsStatusEntry 4 }
+
+appnLsStatusPartnerId OBJECT-TYPE
+ SYNTAX SnaNodeIdentification
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The partner's Node Identification, from bytes 2-5 of the XID
+
+
+
+Clouston & Moore Standards Track [Page 46]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ received from the partner. If this value is not available,
+ then the characters '00000000' are returned."
+
+ ::= { appnLsStatusEntry 5 }
+
+appnLsStatusTgNum OBJECT-TYPE
+ SYNTAX INTEGER (0..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number associated with the TG to this link station, with a
+ range from 0 to 256. A value of 256 indicates that the TG
+ number was unknown at the time of the failure."
+
+ ::= { appnLsStatusEntry 6 }
+
+appnLsStatusGeneralSense OBJECT-TYPE
+ SYNTAX SnaSenseData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The error sense data associated with the start sequence of
+ activation of a link up to the beginning of the XID sequence.
+
+ This is the sense data that came from Configuration Services
+ whenever the link did not activate or when it went inactive."
+
+ ::= { appnLsStatusEntry 7 }
+
+appnLsStatusRetry OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node will retry the start request to
+ activate the link."
+
+ ::= { appnLsStatusEntry 8 }
+
+appnLsStatusEndSense OBJECT-TYPE
+ SYNTAX SnaSenseData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sense data associated with the termination of the link
+ connection to adjacent node.
+
+ This is the sense data that came from the DLC layer."
+
+
+
+Clouston & Moore Standards Track [Page 47]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnLsStatusEntry 9 }
+
+appnLsStatusXidLocalSense OBJECT-TYPE
+ SYNTAX SnaSenseData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sense data associated with the rejection of the XID.
+
+ This is the sense data that came from the local node (this
+ node) when it built the XID Negotiation Error control vector
+ (cv22) to send to the remote node."
+
+ ::= { appnLsStatusEntry 10 }
+
+appnLsStatusXidRemoteSense OBJECT-TYPE
+ SYNTAX SnaSenseData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sense data the adjacent node returned to this node
+ indicating the reason the XID was rejected.
+
+ This is the sense data that came from the remote node in the
+ XID Negotiation Error control vector (cv22) it sent to the
+ local node (this node)."
+
+ ::= { appnLsStatusEntry 11 }
+
+appnLsStatusXidByteInError OBJECT-TYPE
+ SYNTAX INTEGER (0..65536)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object identifies the actual byte in the XID that caused
+ the error. The value 65536 indicates that the object has no
+ meaning.
+
+ For values in the range 0-65535, this object corresponds to
+ bytes 2-3 of the XID Negotiation (X'22') control vector."
+
+ ::= { appnLsStatusEntry 12 }
+
+appnLsStatusXidBitInError OBJECT-TYPE
+ SYNTAX INTEGER (0..8)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 48]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "This object identifies the actual bit in error (0 through 7)
+ within the errored byte of the XID. The value 8 indicates that
+ this object has no meaning.
+
+ For values in the range 0-7, this object corresponds to byte 4
+ of the XID Negotiation (X'22') control vector."
+
+ ::= { appnLsStatusEntry 13 }
+
+appnLsStatusDlcType OBJECT-TYPE
+ SYNTAX IANAifType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of DLC interface, distinguished according to the
+ protocol immediately 'below' this layer."
+
+ ::= { appnLsStatusEntry 14 }
+
+appnLsStatusLocalAddr OBJECT-TYPE
+ SYNTAX DisplayableDlcAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Local address of this link station."
+
+ ::= { appnLsStatusEntry 15 }
+
+appnLsStatusRemoteAddr OBJECT-TYPE
+ SYNTAX DisplayableDlcAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Address of the remote link station on this link."
+
+ ::= { appnLsStatusEntry 16 }
+
+-- *********************************************************************
+-- APPN Virtual Routing Node Information
+--
+
+appnVrnTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnVrnEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table relates a virtual routing node to an APPN port."
+
+
+
+
+Clouston & Moore Standards Track [Page 49]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnVrnInfo 1 }
+
+appnVrnEntry OBJECT-TYPE
+ SYNTAX AppnVrnEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is indexed by the virtual routing node name, TG
+ number, and port name. There will be a matching entry in the
+ appnLocalTgTable to represent status and characteristics of the
+ TG representing each virtual routing node definition."
+
+ INDEX
+ { appnVrnName, appnVrnTgNum, appnVrnPortName }
+
+ ::= { appnVrnTable 1 }
+
+AppnVrnEntry ::= SEQUENCE {
+ appnVrnName SnaControlPointName,
+ appnVrnTgNum INTEGER,
+ appnVrnPortName DisplayString
+}
+
+appnVrnName OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name of the virtual routing node.
+ This is a fully qualified name, and matches the appnLocalTgDest
+ name in the appnLocalTgTable."
+
+ ::= { appnVrnEntry 1 }
+
+appnVrnTgNum OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number associated with the transmission group representing
+ this virtual routing node definition."
+
+ ::= { appnVrnEntry 2 }
+
+appnVrnPortName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..10))
+ MAX-ACCESS read-only
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 50]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "The name of the port this virtual routing node definition is
+ defined to."
+
+ ::= { appnVrnEntry 3 }
+
+-- ************** The APPN Topology Group ******************************
+
+appnNn OBJECT IDENTIFIER ::= { appnObjects 2 }
+appnNnTopo OBJECT IDENTIFIER ::= { appnNn 1 }
+appnNnTopology OBJECT IDENTIFIER ::= { appnNn 2 }
+
+-- This group is used to represent the entire APPN network-node topology
+-- including network nodes, virtual routing nodes and all TGs associated
+-- with these nodes.
+--
+-- Network nodes
+-- The APPN topology database consists of information about every APPN
+-- network node in this network node's topology subnetwork. This
+-- information is learned over time as each network node exchanges
+-- topology information with the network nodes adjacent to it. The
+-- database consists of information about each node, and information
+-- about all of the transmission groups used by these nodes.
+--
+-- Virtual routing nodes
+-- Information about virtual routing nodes (representing connection
+-- networks) is treated in the same way as information about network
+-- nodes, and is replicated at each network node. The FRSN, node name,
+-- and node type are the only meaningful fields for a virtual routing
+-- node. The other node objects return unspecified values. Each
+-- node that has defined a TG with this virtual routing node as the
+-- destination also defines a TG on this virtual routing node. There
+-- is a TG record for each node that uses this virtual routing node.
+--
+-- The APPN node table represents node information from the APPN topology
+-- database, with the FRSN and APPN CP fully qualified name serving as
+-- the index. The FRSN is the agent's relative time stamp of an update
+-- to the network topology database. After collecting the entire database
+-- once, a management application can issue GET NEXT commands starting
+-- from the last rows it has retrieved from the appnNnTopologyFRTable and
+-- from the appnNnTgTopologyFRTable. When the response to either of these
+-- GET NEXT commands returns another row of its respective table, this
+-- indicates a change to the agent's topology database. The management
+-- application can then retrieve only the updates to the table, using
+-- GET NEXT commands starting from the last retrieved node or TG
+-- entry.
+--
+-- The format of the actual APPN topology database is as follows:
+
+
+
+Clouston & Moore Standards Track [Page 51]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+--
+-- Node table (entry for each node in network)
+-- TG table (entry for each TG owned by node)
+--
+-- Due to SNMP's ASN.1 limitations, we cannot represent the TG table
+-- within the node table in this way. We define separate tables for
+-- nodes and TGs, adding the node name to each TG entry to provide a
+-- means of correlating the TG with its originating node.
+
+appnNnTopoMaxNodes OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "node entries"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum number of node entries allowed in the APPN topology
+ database. It is an implementation choice whether to count only
+ network-node entries, or to count all node entries. If the
+ number of node entries exceeds this value, APPN will issue an
+ Alert and the node can no longer participate as a network node.
+ The value 0 indicates that the local node has no defined limit,
+ and the number of node entries is bounded only by memory."
+
+ ::= { appnNnTopo 1 }
+
+appnNnTopoCurNumNodes OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "node entries"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current number of node entries in this node's topology
+ database. It is an implementation choice whether to count only
+ network-node entries, or to count all node entries, but an
+ implementation must make the same choice here that it makes for
+ the appnNnTopoMaxNodes object. If this value exceeds the
+ maximum number of nodes allowed (appnNnTopoMaxNodes, if that
+ field in not 0), APPN Alert CPDB002 is issued."
+
+ ::= { appnNnTopo 2 }
+
+appnNnTopoNodePurges OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "node entries"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of topology node records purged from this node's
+
+
+
+Clouston & Moore Standards Track [Page 52]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ topology database since the node was last re-initialized."
+
+ ::= { appnNnTopo 3 }
+
+appnNnTopoTgPurges OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "TG entries"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of topology TG records purged from this node's
+ topology database since the node was last re-initialized."
+
+ ::= { appnNnTopo 4 }
+
+appnNnTopoTotalTduWars OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "TDU wars"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of TDU wars detected by this node since its last
+ initialization."
+
+ ::= { appnNnTopo 5 }
+
+
+
+-- APPN network node topology table (using FRSN and name as index)
+
+-- This table describes every APPN network node and virtual routing node
+-- represented in this node's topology database.
+
+appnNnTopologyFRTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnNnTopologyFREntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Portion of the APPN topology database that describes all of
+ the APPN network nodes and virtual routing nodes known to this
+ node."
+
+ ::= { appnNnTopology 3 }
+
+appnNnTopologyFREntry OBJECT-TYPE
+ SYNTAX AppnNnTopologyFREntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 53]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "The FRSN and the fully qualified node name are used to index
+ this table."
+
+ INDEX
+ {appnNnNodeFRFrsn,
+ appnNnNodeFRName}
+
+ ::= { appnNnTopologyFRTable 1 }
+
+AppnNnTopologyFREntry ::= SEQUENCE {
+ appnNnNodeFRFrsn Unsigned32,
+ appnNnNodeFRName SnaControlPointName,
+ appnNnNodeFREntryTimeLeft AppnTopologyEntryTimeLeft,
+ appnNnNodeFRType INTEGER,
+
+ appnNnNodeFRRsn Unsigned32,
+ appnNnNodeFRRouteAddResist INTEGER,
+ appnNnNodeFRCongested TruthValue,
+ appnNnNodeFRIsrDepleted TruthValue,
+ appnNnNodeFRQuiescing TruthValue,
+ appnNnNodeFRGateway TruthValue,
+ appnNnNodeFRCentralDirectory TruthValue,
+ appnNnNodeFRIsr TruthValue,
+ appnNnNodeFRGarbageCollect TruthValue,
+
+ appnNnNodeFRHprSupport INTEGER,
+ appnNnNodeFRPeriBorderSup TruthValue,
+ appnNnNodeFRInterchangeSup TruthValue,
+ appnNnNodeFRExteBorderSup TruthValue
+}
+
+appnNnNodeFRFrsn OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Flow reduction sequence numbers (FRSNs) are associated with
+ Topology Database Updates (TDUs) and are unique only within
+ each APPN network node. A TDU can be associated with multiple
+ APPN resources. This FRSN indicates the last relative time
+ this resource was updated at the agent node."
+
+ ::= { appnNnTopologyFREntry 1 }
+
+appnNnNodeFRName OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS not-accessible
+
+
+
+Clouston & Moore Standards Track [Page 54]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned network name that is locally defined
+ at each network node."
+
+ ::= { appnNnTopologyFREntry 2 }
+
+appnNnNodeFREntryTimeLeft OBJECT-TYPE
+ SYNTAX AppnTopologyEntryTimeLeft
+ UNITS "days"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of days before deletion of this network node entry."
+
+ ::= { appnNnTopologyFREntry 3 }
+
+appnNnNodeFRType OBJECT-TYPE
+ SYNTAX INTEGER {
+ networkNode(1),
+ virtualRoutingNode(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of APPN node."
+
+ ::= { appnNnTopologyFREntry 4 }
+
+appnNnNodeFRRsn OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Resource sequence number, which is assigned and controlled by
+ the network node that owns this resource. An odd number
+ indicates that information about the resource is inconsistent.
+
+ This object corresponds to the numeric value in cv4580, bytes
+ 2-5."
+
+ ::= { appnNnTopologyFREntry 5 }
+
+appnNnNodeFRRouteAddResist OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 55]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Route addition resistance.
+
+ This administratively assigned value indicates the relative
+ desirability of using this node for intermediate session
+ traffic. The value, which can be any integer 0-255, is used
+ in route computation. The lower the value, the more
+ desirable the node is for intermediate routing.
+
+ This object corresponds to cv4580, byte 6."
+
+ ::= { appnNnTopologyFREntry 6 }
+
+appnNnNodeFRCongested OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node is congested. This node is not be
+ included in route selection by other nodes when this congestion
+ exists.
+
+ This object corresponds to cv4580, byte 7, bit 0."
+
+ ::= { appnNnTopologyFREntry 7 }
+
+appnNnNodeFRIsrDepleted OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether intermediate session routing resources are
+ depleted. This node is not included in intermediate route
+ selection by other nodes when resources are depleted.
+
+ This object corresponds to cv4580, byte 7, bit 1."
+
+ ::= { appnNnTopologyFREntry 8 }
+
+appnNnNodeFRQuiescing OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node is quiescing. This node is not
+ included in route selection by other nodes when the node is
+ quiescing.
+
+ This object corresponds to cv4580, byte 7, bit 5."
+
+
+
+Clouston & Moore Standards Track [Page 56]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnNnTopologyFREntry 9 }
+
+appnNnNodeFRGateway OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node provide gateway services.
+
+ This object corresponds to cv4580, byte 8, bit 0."
+
+
+ ::= { appnNnTopologyFREntry 10 }
+
+appnNnNodeFRCentralDirectory OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node supports central directory
+ services.
+
+ This object corresponds to cv4580, byte 8, bit 1."
+
+
+ ::= { appnNnTopologyFREntry 11 }
+
+appnNnNodeFRIsr OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node supports intermediate session
+ routing (ISR).
+
+ This object corresponds to cv4580, byte 8, bit 2."
+
+ ::= { appnNnTopologyFREntry 12 }
+
+appnNnNodeFRGarbageCollect OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the node has been marked for garbage
+ collection (deletion from the topology database) upon the next
+ garbage collection cycle.
+
+
+
+
+Clouston & Moore Standards Track [Page 57]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ This object corresponds to cv4580, byte 7, bit 3."
+
+ ::= { appnNnTopologyFREntry 13 }
+
+appnNnNodeFRHprSupport OBJECT-TYPE
+ SYNTAX INTEGER {
+ noHprSupport(1),
+ hprBaseOnly(2),
+ rtpTower(3),
+ controlFlowsOverRtpTower(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the node's level of support for high-performance
+ routing (HPR):
+
+ noHprSupport(1) - no HPR support
+ hprBaseOnly(2) - HPR base (option set 1400)
+ supported
+ rtpTower(3) - HPR base and RTP tower
+ (option set 1401) supported
+ controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
+ control flows over RTP
+ (option set 1402) supported
+
+ This object corresponds to cv4580, byte 9, bits 3-4."
+
+ ::= { appnNnTopologyFREntry 14 }
+
+appnNnNodeFRPeriBorderSup OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node has peripheral border node
+ support.
+
+ This object corresponds to cv4580, byte 9, bit 0."
+
+ ::= { appnNnTopologyFREntry 15 }
+
+appnNnNodeFRInterchangeSup OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node has interchange node support.
+
+
+
+Clouston & Moore Standards Track [Page 58]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ This object corresponds to cv4580, byte 9, bit 1."
+
+ ::= { appnNnTopologyFREntry 16 }
+
+appnNnNodeFRExteBorderSup OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this node has extended border node
+ support.
+
+ This object corresponds to cv4580, byte 9, bit 2."
+
+ ::= { appnNnTopologyFREntry 17 }
+
+
+--APPN transmission group (TG) table
+
+-- This table describes the TGs associated with all the APPN network
+-- nodes known to this node. The originating (owning) node for each
+-- TG is repeated here to provide a means of correlating the TGs with
+-- the nodes.
+
+
+appnNnTgTopologyFRTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnNnTgTopologyFREntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Portion of the APPN topology database that describes all of
+ the APPN transmissions groups between nodes in the database."
+
+ ::= { appnNnTopology 4 }
+
+appnNnTgTopologyFREntry OBJECT-TYPE
+ SYNTAX AppnNnTgTopologyFREntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is indexed by four columns: FRSN, TG owner fully
+ qualified node name, TG destination fully qualified node name,
+ and TG number."
+
+ INDEX
+ {appnNnTgFRFrsn,
+ appnNnTgFROwner,
+ appnNnTgFRDest,
+
+
+
+Clouston & Moore Standards Track [Page 59]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnNnTgFRNum}
+
+ ::= { appnNnTgTopologyFRTable 1 }
+
+AppnNnTgTopologyFREntry ::= SEQUENCE {
+
+ appnNnTgFRFrsn Unsigned32,
+ appnNnTgFROwner SnaControlPointName,
+ appnNnTgFRDest SnaControlPointName,
+ appnNnTgFRNum INTEGER,
+ appnNnTgFREntryTimeLeft AppnTopologyEntryTimeLeft,
+
+ appnNnTgFRDestVirtual TruthValue,
+ appnNnTgFRDlcData AppnTgDlcData,
+
+ appnNnTgFRRsn Unsigned32,
+ appnNnTgFROperational TruthValue,
+ appnNnTgFRQuiescing TruthValue,
+ appnNnTgFRCpCpSession INTEGER,
+ appnNnTgFREffCap AppnTgEffectiveCapacity,
+ appnNnTgFRConnCost INTEGER,
+ appnNnTgFRByteCost INTEGER,
+ appnNnTgFRSecurity AppnTgSecurity,
+ appnNnTgFRDelay AppnTgDelay,
+ appnNnTgFRUsr1 INTEGER,
+ appnNnTgFRUsr2 INTEGER,
+ appnNnTgFRUsr3 INTEGER,
+ appnNnTgFRGarbageCollect TruthValue,
+ appnNnTgFRSubareaNum Unsigned32,
+
+ appnNnTgFRHprSup TruthValue,
+ appnNnTgFRDestHprTrans TruthValue,
+ appnNnTgFRTypeIndicator INTEGER,
+ appnNnTgFRIntersubnet TruthValue
+}
+
+
+appnNnTgFRFrsn OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Flow reduction sequence numbers (FRSNs) are associated with
+ Topology Database Updates (TDUs) and are unique only within
+ each APPN network node. A TDU can be associated with multiple
+ APPN resources. This FRSN indicates the last time this
+ resource was updated at this node."
+
+
+
+
+Clouston & Moore Standards Track [Page 60]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnNnTgTopologyFREntry 1 }
+
+appnNnTgFROwner OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for the originating node for
+ this TG. This is the same name specified in the node table."
+
+ ::= { appnNnTgTopologyFREntry 2 }
+
+appnNnTgFRDest OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned fully qualified network name for the
+ destination node for this TG."
+
+ ::= { appnNnTgTopologyFREntry 3 }
+
+appnNnTgFRNum OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number associated with this transmission group. Range is
+ 0-255."
+
+ ::= { appnNnTgTopologyFREntry 4 }
+
+appnNnTgFREntryTimeLeft OBJECT-TYPE
+ SYNTAX AppnTopologyEntryTimeLeft
+ UNITS "days"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of days before deletion of this network node TG entry
+ if it is not operational or has an odd (inconsistent) RSN."
+
+ ::= { appnNnTgTopologyFREntry 5 }
+
+appnNnTgFRDestVirtual OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 61]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Indicates whether the destination node is a virtual routing
+ node."
+
+ ::= { appnNnTgTopologyFREntry 6 }
+
+appnNnTgFRDlcData OBJECT-TYPE
+ SYNTAX AppnTgDlcData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DLC-specific data related to a link connection network."
+
+ ::= { appnNnTgTopologyFREntry 7 }
+
+appnNnTgFRRsn OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current owning node's resource sequence number for this
+ resource. An odd number indicates that information about the
+ resource is inconsistent.
+
+ This object corresponds to the numeric value in cv47, bytes
+ 2-5"
+
+ ::= { appnNnTgTopologyFREntry 8 }
+
+appnNnTgFROperational OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the transmission group is operational.
+
+ This object corresponds to cv47, byte 6, bit 0."
+
+ ::= { appnNnTgTopologyFREntry 9 }
+
+appnNnTgFRQuiescing OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the transmission group is quiescing.
+
+ This object corresponds to cv47, byte 6, bit 2."
+
+
+
+
+Clouston & Moore Standards Track [Page 62]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnNnTgTopologyFREntry 10 }
+
+appnNnTgFRCpCpSession OBJECT-TYPE
+ SYNTAX INTEGER {
+ supportedUnknownStatus(1),
+ supportedActive(2),
+ notSupported(3),
+ supportedNotActive(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether CP-CP sessions are supported on this TG, and
+ whether the TG owner's contention-winner session is active on
+ this TG. Some nodes in the network are not able to
+ differentiate support and status of CP-CP sessions, and thus
+ may report the 'supportedUnknownStatus' value.
+
+ This object corresponds to cv47, byte 6, bits 3-4."
+
+ ::= { appnNnTgTopologyFREntry 11 }
+
+
+appnNnTgFREffCap OBJECT-TYPE
+ SYNTAX AppnTgEffectiveCapacity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Effective capacity for this TG."
+
+ ::= { appnNnTgTopologyFREntry 12 }
+
+appnNnTgFRConnCost OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Cost per connect time.
+
+ This is an administratively assigned value representing the
+ relative cost per unit of time to use this TG. Range is from
+ 0, which means no cost, to 255, which indicates maximum cost.
+
+ This object corresponds to cv47, byte 13."
+
+ ::= { appnNnTgTopologyFREntry 13 }
+
+appnNnTgFRByteCost OBJECT-TYPE
+
+
+
+Clouston & Moore Standards Track [Page 63]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Cost per byte transmitted.
+
+ This is an administratively assigned value representing the
+ relative cost of transmitting a byte over this TG. Range is
+ from 0, which means no cost, to 255, which indicates maximum
+ cost.
+
+ This object corresponds to cv47, byte 14."
+
+ ::= { appnNnTgTopologyFREntry 14 }
+
+appnNnTgFRSecurity OBJECT-TYPE
+ SYNTAX AppnTgSecurity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned security level of this TG.
+
+ This object corresponds to cv47, byte 16."
+
+ ::= { appnNnTgTopologyFREntry 15 }
+
+appnNnTgFRDelay OBJECT-TYPE
+ SYNTAX AppnTgDelay
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned delay associated with this TG.
+
+ This object corresponds to cv47, byte 17."
+
+ ::= { appnNnTgTopologyFREntry 16 }
+
+appnNnTgFRUsr1 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "First user-defined TG characteristic for this TG. This is
+ an administratively assigned value associated with the TG.
+
+ This object corresponds to cv47, byte 19."
+
+ ::= { appnNnTgTopologyFREntry 17 }
+
+
+
+Clouston & Moore Standards Track [Page 64]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnNnTgFRUsr2 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Second user-defined TG characteristic for this TG. This is
+ an administratively assigned value associated with the TG.
+
+ This object corresponds to cv47, byte 20."
+
+ ::= { appnNnTgTopologyFREntry 18 }
+
+appnNnTgFRUsr3 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Third user-defined TG characteristic for this TG. This is
+ an administratively assigned value associated with the TG.
+
+ This object corresponds to cv47, byte 21."
+
+ ::= { appnNnTgTopologyFREntry 19 }
+
+appnNnTgFRGarbageCollect OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the TG has been marked for garbage
+ collection (deletion from the topology database) upon the next
+ garbage collection cycle.
+
+ This object corresponds to cv47, byte 6, bit 1."
+
+ ::= { appnNnTgTopologyFREntry 20 }
+
+appnNnTgFRSubareaNum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The subarea number associated with this TG.
+
+ This object corresponds to cv4680, bytes m+2 through m+5."
+
+ ::= { appnNnTgTopologyFREntry 21 }
+
+
+
+
+Clouston & Moore Standards Track [Page 65]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnNnTgFRHprSup OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether high performance routing (HPR)
+ is supported over this TG.
+
+ This object corresponds to cv4680, byte m+1, bit 2."
+
+ ::= { appnNnTgTopologyFREntry 22 }
+
+appnNnTgFRDestHprTrans OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the destination node supports
+ high performance routing (HPR) transport tower.
+
+ This object corresponds to cv4680, byte m+1, bit 7."
+
+ ::= { appnNnTgTopologyFREntry 23 }
+
+appnNnTgFRTypeIndicator OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ appnOrBfTg(2),
+ interchangeTg(3),
+ virtualRouteTg(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the type of the TG.
+
+ This object corresponds to cv4680, byte m+1, bits 3-4."
+
+ ::= { appnNnTgTopologyFREntry 24 }
+
+appnNnTgFRIntersubnet OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the transmission group is an intersubnet TG,
+ which defines a border between subnetworks.
+
+
+
+
+Clouston & Moore Standards Track [Page 66]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ This object corresponds to cv4680, byte m+1, bit 5."
+
+ ::= { appnNnTgTopologyFREntry 25 }
+
+-- ************** The APPN Local Topology Group ************************
+-- This MIB Group represents the local topology maintained in
+-- both APPN end nodes and network nodes. It consists of two
+-- tables:
+-- - a table containing information about all of the TGs owned
+-- by this node, which is implemented by all node types.
+-- - a table containing all of the information known to this node
+-- about the TGs owned by its end nodes, which is implemented only
+-- by network nodes.
+
+appnLocalTopology OBJECT IDENTIFIER ::= { appnObjects 3 }
+
+-- APPN Local Transmission Group (TG) table
+-- This table describes the TGs associated with this node only.
+
+appnLocalTgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnLocalTgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "TG Table describes all of the TGs owned by this node. The TG
+ destination can be a virtual node, network node, LEN node, or
+ end node."
+
+ ::= { appnLocalTopology 1 }
+
+appnLocalTgEntry OBJECT-TYPE
+ SYNTAX AppnLocalTgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is indexed by the destination CPname and the TG
+ number."
+
+ INDEX
+ {appnLocalTgDest,
+ appnLocalTgNum}
+
+ ::= { appnLocalTgTable 1 }
+
+AppnLocalTgEntry ::= SEQUENCE {
+
+ appnLocalTgDest SnaControlPointName,
+ appnLocalTgNum INTEGER,
+
+
+
+Clouston & Moore Standards Track [Page 67]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnLocalTgDestVirtual TruthValue,
+ appnLocalTgDlcData AppnTgDlcData,
+ appnLocalTgPortName DisplayString,
+
+ appnLocalTgQuiescing TruthValue,
+ appnLocalTgOperational TruthValue,
+ appnLocalTgCpCpSession INTEGER,
+ appnLocalTgEffCap AppnTgEffectiveCapacity,
+ appnLocalTgConnCost INTEGER,
+ appnLocalTgByteCost INTEGER,
+ appnLocalTgSecurity AppnTgSecurity,
+ appnLocalTgDelay AppnTgDelay,
+ appnLocalTgUsr1 INTEGER,
+ appnLocalTgUsr2 INTEGER,
+ appnLocalTgUsr3 INTEGER,
+
+ appnLocalTgHprSup INTEGER,
+ appnLocalTgIntersubnet TruthValue
+ }
+
+appnLocalTgDest OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name of the destination node for
+ this TG. This is the fully qualified name of a network node,
+ end node, LEN node, or virtual routing node."
+
+ ::= { appnLocalTgEntry 1 }
+
+appnLocalTgNum OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number associated with this transmission group."
+
+ ::= { appnLocalTgEntry 2 }
+
+appnLocalTgDestVirtual OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the destination node for this TG is a
+ virtual routing node."
+
+
+
+
+Clouston & Moore Standards Track [Page 68]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnLocalTgEntry 3 }
+
+appnLocalTgDlcData OBJECT-TYPE
+ SYNTAX AppnTgDlcData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DLC-specific data related to a link connection network."
+
+ ::= { appnLocalTgEntry 4 }
+
+appnLocalTgPortName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for the local port associated
+ with this TG. A zero-length string indicates that this value
+ is unknown."
+
+ ::= { appnLocalTgEntry 5 }
+
+appnLocalTgQuiescing OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the transmission group is quiescing."
+
+ ::= { appnLocalTgEntry 6 }
+
+appnLocalTgOperational OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the transmission group is operational."
+
+ ::= { appnLocalTgEntry 7 }
+
+appnLocalTgCpCpSession OBJECT-TYPE
+ SYNTAX INTEGER {
+ supportedUnknownStatus(1),
+ supportedActive(2),
+ notSupported(3),
+ supportedNotActive(4)
+ }
+ MAX-ACCESS read-only
+
+
+
+Clouston & Moore Standards Track [Page 69]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ STATUS current
+ DESCRIPTION
+ "Indicates whether CP-CP sessions are supported on this TG, and
+ whether the TG owner's contention-winner session is active on
+ this TG. Some nodes in the network are not able to
+ differentiate support and status of CP-CP sessions, and thus
+ may report the 'supportedUnknownStatus' value."
+
+ ::= { appnLocalTgEntry 8 }
+
+appnLocalTgEffCap OBJECT-TYPE
+ SYNTAX AppnTgEffectiveCapacity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Effective capacity for this TG."
+
+ ::= { appnLocalTgEntry 9 }
+
+appnLocalTgConnCost OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Cost per connect time: a value representing the relative cost
+ per unit of time to use the TG. Range is from 0, which means
+ no cost, to 255."
+
+ ::= { appnLocalTgEntry 10 }
+
+appnLocalTgByteCost OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Relative cost of transmitting a byte over this link.
+ Range is from 0 (lowest cost) to 255."
+
+ ::= { appnLocalTgEntry 11 }
+
+appnLocalTgSecurity OBJECT-TYPE
+ SYNTAX AppnTgSecurity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned security level of this TG."
+
+ ::= { appnLocalTgEntry 12 }
+
+
+
+Clouston & Moore Standards Track [Page 70]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnLocalTgDelay OBJECT-TYPE
+ SYNTAX AppnTgDelay
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned delay associated with this TG."
+
+ ::= { appnLocalTgEntry 13 }
+
+appnLocalTgUsr1 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "First user-defined TG characteristic for this TG. This is
+ an administratively assigned value associated with the TG."
+
+ ::= { appnLocalTgEntry 14 }
+
+appnLocalTgUsr2 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Second user-defined TG characteristic for this TG. This is
+ an administratively assigned value associated with the TG."
+
+ ::= { appnLocalTgEntry 15 }
+
+appnLocalTgUsr3 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Third user-defined TG characteristic for this TG. This is
+ an administratively assigned value associated with the TG."
+
+ ::= { appnLocalTgEntry 16 }
+
+appnLocalTgHprSup OBJECT-TYPE
+ SYNTAX INTEGER {
+ noHprSupport(1),
+ hprBaseOnly(2),
+ rtpTower(3),
+ controlFlowsOverRtpTower(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 71]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "Indicates the level of high performance routing (HPR) support
+ over this TG :
+
+ noHprSupport(1) - no HPR support
+ hprBaseOnly(2) - HPR base (option set 1400)
+ supported
+ rtpTower(3) - HPR base and RTP tower
+ (option set 1401) supported
+ controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
+ control flows over RTP
+ (option set 1402) supported"
+
+ ::= { appnLocalTgEntry 17 }
+
+appnLocalTgIntersubnet OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the transmission group is an intersubnet TG,
+ which defines a border between subnetworks."
+
+ ::= { appnLocalTgEntry 18 }
+
+
+-- APPN Local End Node Transmission Group (TG) table
+-- This table describes the TGs associated with all of the end nodes
+-- known to this node.
+
+appnLocalEnTgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnLocalEnTgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table describing all of the TGs owned by the end nodes known
+ to this node via TG registration. This node does not represent
+ its own view of the TG on behalf of the partner node in this
+ table. The TG destination can be a virtual routing node,
+ network node, or end node."
+
+ ::= { appnLocalTopology 2 }
+
+appnLocalEnTgEntry OBJECT-TYPE
+ SYNTAX AppnLocalEnTgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 72]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "This table requires multiple indexes to uniquely identify each
+ TG. They are originating CPname, destination CPname, and the
+ TG number."
+
+ INDEX
+ {appnLocalEnTgOrigin,
+ appnLocalEnTgDest,
+ appnLocalEnTgNum}
+
+ ::= { appnLocalEnTgTable 1 }
+
+AppnLocalEnTgEntry ::= SEQUENCE {
+ appnLocalEnTgOrigin SnaControlPointName,
+ appnLocalEnTgDest SnaControlPointName,
+ appnLocalEnTgNum INTEGER,
+ appnLocalEnTgEntryTimeLeft AppnTopologyEntryTimeLeft,
+
+ appnLocalEnTgDestVirtual TruthValue,
+ appnLocalEnTgDlcData AppnTgDlcData,
+
+ appnLocalEnTgOperational TruthValue,
+ appnLocalEnTgCpCpSession INTEGER,
+ appnLocalEnTgEffCap AppnTgEffectiveCapacity,
+ appnLocalEnTgConnCost INTEGER,
+ appnLocalEnTgByteCost INTEGER,
+ appnLocalEnTgSecurity AppnTgSecurity,
+ appnLocalEnTgDelay AppnTgDelay,
+ appnLocalEnTgUsr1 INTEGER,
+ appnLocalEnTgUsr2 INTEGER,
+ appnLocalEnTgUsr3 INTEGER
+ }
+
+appnLocalEnTgOrigin OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name of the origin node for this
+ TG. This is a fully qualified network name."
+
+ ::= { appnLocalEnTgEntry 1 }
+
+appnLocalEnTgDest OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name of the destination node for
+
+
+
+Clouston & Moore Standards Track [Page 73]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ this TG. This is the fully qualified name of a network node,
+ end node, LEN node, or virtual routing node."
+
+ ::= { appnLocalEnTgEntry 2 }
+
+appnLocalEnTgNum OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Number associated with this transmission group."
+
+ ::= { appnLocalEnTgEntry 3 }
+
+appnLocalEnTgEntryTimeLeft OBJECT-TYPE
+ SYNTAX AppnTopologyEntryTimeLeft
+ UNITS "days"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of days before deletion of this end node TG entry."
+
+ ::= { appnLocalEnTgEntry 4 }
+
+appnLocalEnTgDestVirtual OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the destination node is a virtual routing
+ node."
+
+ ::= { appnLocalEnTgEntry 5 }
+
+appnLocalEnTgDlcData OBJECT-TYPE
+ SYNTAX AppnTgDlcData
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DLC-specific data related to a link connection network."
+
+ ::= { appnLocalEnTgEntry 6 }
+
+appnLocalEnTgOperational OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 74]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Indicates whether the transmission group is operational."
+
+ ::= { appnLocalEnTgEntry 7 }
+
+appnLocalEnTgCpCpSession OBJECT-TYPE
+ SYNTAX INTEGER {
+ supportedUnknownStatus(1),
+ supportedActive(2),
+ notSupported(3),
+ supportedNotActive(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether CP-CP sessions are supported on this TG, and
+ whether the TG owner's contention-winner session is active on
+ this TG. Some nodes in the network are not able to
+ differentiate support and status of CP-CP sessions, and thus
+ may report the 'supportedUnknownStatus' value."
+
+ ::= { appnLocalEnTgEntry 8 }
+
+appnLocalEnTgEffCap OBJECT-TYPE
+ SYNTAX AppnTgEffectiveCapacity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Effective capacity for this TG."
+
+ ::= { appnLocalEnTgEntry 9 }
+
+appnLocalEnTgConnCost OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Cost per connect time: a value representing the relative cost
+ per unit of time to use the TG. Range is from 0, which means
+ no cost, to 255."
+
+ ::= { appnLocalEnTgEntry 10 }
+
+appnLocalEnTgByteCost OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Relative cost of transmitting a byte over this link.
+
+
+
+Clouston & Moore Standards Track [Page 75]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ Range is from 0, which means no cost, to 255."
+
+ ::= { appnLocalEnTgEntry 11 }
+
+appnLocalEnTgSecurity OBJECT-TYPE
+ SYNTAX AppnTgSecurity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned security level of this TG."
+
+ ::= { appnLocalEnTgEntry 12 }
+
+appnLocalEnTgDelay OBJECT-TYPE
+ SYNTAX AppnTgDelay
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned delay associated with this TG."
+
+ ::= { appnLocalEnTgEntry 13 }
+
+appnLocalEnTgUsr1 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "First user-defined TG characteristic for this TG. This is
+ an administratively assigned value associated with the TG."
+
+ ::= { appnLocalEnTgEntry 14 }
+
+appnLocalEnTgUsr2 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Second user-defined TG characteristic for this TG. This is
+ an administratively assigned value associated with the TG."
+
+ ::= { appnLocalEnTgEntry 15 }
+
+appnLocalEnTgUsr3 OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Third user-defined TG characteristic for this TG. This is
+
+
+
+Clouston & Moore Standards Track [Page 76]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ an administratively assigned value associated with the TG."
+
+ ::= { appnLocalEnTgEntry 16 }
+
+-- ************** The APPN Directory Group *****************************
+appnDir OBJECT IDENTIFIER ::= { appnObjects 4 }
+appnDirPerf OBJECT IDENTIFIER ::= { appnDir 1 }
+
+-- The APPN Directory Group
+
+-- The APPN Directory Database
+
+-- Each APPN network node maintains directories containing information on
+-- which LUs (applications) are available and where they are located.
+-- LUs can be located in an APPN network node or in any of its attached
+-- end nodes.
+
+appnDirMaxCaches OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "directory entries"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum number of cache entries allowed. This is an
+ administratively assigned value."
+
+ ::= { appnDirPerf 1 }
+
+appnDirCurCaches OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "directory entries"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current number of cache entries."
+
+ ::= { appnDirPerf 2 }
+
+appnDirCurHomeEntries OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "directory entries"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current number of home entries."
+
+ ::= { appnDirPerf 3 }
+
+
+
+
+Clouston & Moore Standards Track [Page 77]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnDirRegEntries OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "directory entries"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current number of registered entries."
+
+ ::= { appnDirPerf 4 }
+
+appnDirInLocates OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "Locate messages"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of directed Locates received since the node was last
+ re-initialized."
+
+ ::= { appnDirPerf 5 }
+
+appnDirInBcastLocates OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "Locate messages"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of broadcast Locates received since the node was last
+ re-initialized."
+
+ ::= { appnDirPerf 6 }
+
+appnDirOutLocates OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "Locate messages"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of directed Locates sent since the node was last
+ re-initialized."
+
+ ::= { appnDirPerf 7 }
+
+appnDirOutBcastLocates OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "Locate messages"
+ MAX-ACCESS read-only
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 78]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "Number of broadcast Locates sent since the node was last
+ re-initialized."
+
+ ::= { appnDirPerf 8 }
+
+appnDirNotFoundLocates OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "Locate messages"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of directed Locates returned with a 'not found' since
+ the node was last re-initialized."
+
+ ::= { appnDirPerf 9 }
+
+appnDirNotFoundBcastLocates OBJECT-TYPE
+ SYNTAX AppnNodeCounter
+ UNITS "Locate messages"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of broadcast Locates returned with a 'not found' since
+ the node was last re-initialized."
+
+ ::= { appnDirPerf 10 }
+
+appnDirLocateOutstands OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "Locate messages"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current number of outstanding Locates, both directed and
+ broadcast. This value varies. A value of zero indicates
+ that no Locates are unanswered."
+
+ ::= { appnDirPerf 11 }
+
+
+--APPN Directory table
+-- This table contains information about all known LUs.
+
+appnDirTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnDirEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+
+
+Clouston & Moore Standards Track [Page 79]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ DESCRIPTION
+ "Table containing information about all known LUs."
+
+ ::= { appnDir 2 }
+
+appnDirEntry OBJECT-TYPE
+ SYNTAX AppnDirEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is indexed by the LU name."
+
+ INDEX
+ {appnDirLuName}
+
+ ::= { appnDirTable 1 }
+
+AppnDirEntry ::= SEQUENCE {
+ appnDirLuName DisplayString,
+ appnDirNnServerName SnaControlPointName,
+ appnDirLuOwnerName SnaControlPointName,
+ appnDirLuLocation INTEGER,
+ appnDirType INTEGER
+ }
+
+appnDirLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..17))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Fully qualified network LU name in the domain of the
+ serving network node. Entries take one of three forms:
+
+ - Explicit entries do not contain the character '*'.
+ - Partial wildcard entries have the form 'ccc*', where
+ 'ccc' represents one to sixteen characters in a
+ legal SNA LuName.
+ - A full wildcard entry consists of the single
+ character '*'"
+
+ ::= { appnDirEntry 1 }
+
+appnDirNnServerName OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fully qualified control point (CP) name of the network node
+
+
+
+Clouston & Moore Standards Track [Page 80]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ server. For unassociated end node entries, a zero-length
+ string is returned."
+
+ ::= { appnDirEntry 2 }
+
+appnDirLuOwnerName OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fully qualified CP name of the node at which the LU is
+ located. This name is the same as the serving NN name when
+ the LU is located at a network node. It is also the same as
+ the fully qualified LU name when this is the control point
+ LU for this node."
+
+ ::= { appnDirEntry 3 }
+
+appnDirLuLocation OBJECT-TYPE
+ SYNTAX INTEGER {
+ local(1), --Local
+ domain(2), --Domain
+ xdomain(3) --Cross Domain
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the location of the LU with respect to the local
+ node."
+
+ ::= { appnDirEntry 4 }
+
+appnDirType OBJECT-TYPE
+ SYNTAX INTEGER {
+ home(1), --defined as home entry
+ cache(2), --learned over time
+ registered(3) --registered by end node
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Directory types are:
+ 1 - Home
+ The LU is in the domain of the local node, and the LU
+ information has been configured at the local node.
+
+ 2 - Cache
+ The LU has previously been located by a broadcast
+
+
+
+Clouston & Moore Standards Track [Page 81]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ search, and the location information has been saved.
+
+ 3 - Registered
+ The LU is at an end node that is in the domain
+ of the local network node. Registered entries
+ are registered by the served end node."
+
+ ::= { appnDirEntry 5 }
+
+
+-- ************** The APPN Class of Service Group **********************
+
+appnCos OBJECT IDENTIFIER ::= { appnObjects 5 }
+
+-- The APPN Class of Service (COS)
+
+-- Class of Service is a means of expressing the quality of routes and
+-- the transmission priority of traffic that flows on these routes.
+-- The quality of routes is specified by two tables, a COS weight table
+-- for TGs and a COS weight table for nodes. Values in these COS tables
+-- are administratively assigned at each APPN node, with seven default
+-- tables specified by the APPN architecture.
+-- *********************************************************************
+
+appnCosModeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnCosModeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table representing all of the defined mode names for this
+ node. The table contains the matching COS name for each
+ mode name."
+
+ ::= { appnCos 1 }
+
+appnCosModeEntry OBJECT-TYPE
+ SYNTAX AppnCosModeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is indexed by the mode name."
+
+ INDEX
+ {appnCosModeName}
+
+ ::= { appnCosModeTable 1 }
+
+AppnCosModeEntry ::= SEQUENCE {
+
+
+
+Clouston & Moore Standards Track [Page 82]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnCosModeName SnaModeName,
+ appnCosModeCosName SnaClassOfServiceName
+ }
+
+appnCosModeName OBJECT-TYPE
+ SYNTAX SnaModeName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for this mode."
+
+ ::= { appnCosModeEntry 1 }
+
+appnCosModeCosName OBJECT-TYPE
+ SYNTAX SnaClassOfServiceName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for this class of service."
+
+ ::= { appnCosModeEntry 2 }
+
+
+-- *********************************************************************
+appnCosNameTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnCosNameEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table mapping all of the defined class-of-service names for
+ this node to their network transmission priorities."
+
+ ::= { appnCos 2 }
+
+appnCosNameEntry OBJECT-TYPE
+ SYNTAX AppnCosNameEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The COS name is the index to this table."
+
+ INDEX
+ {appnCosName}
+
+ ::= { appnCosNameTable 1 }
+
+AppnCosNameEntry ::= SEQUENCE {
+ appnCosName SnaClassOfServiceName,
+
+
+
+Clouston & Moore Standards Track [Page 83]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnCosTransPriority INTEGER
+ }
+
+
+appnCosName OBJECT-TYPE
+ SYNTAX SnaClassOfServiceName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for this class of service."
+
+ ::= { appnCosNameEntry 1 }
+
+appnCosTransPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(1), --X'01'
+ medium(2), --X'02'
+ high(3), --X'03'
+ network(4) --X'04'
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmission priority for this class of service:
+
+ low(1) - (X'01'): low priority
+ medium(2) - (X'02'): medium priority
+ high(3) - (X'03'): high priority
+ network(4) - (X'04'): network priority"
+
+ ::= { appnCosNameEntry 2 }
+
+-- *********************************************************************
+appnCosNodeRowTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnCosNodeRowEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains all node-row information for all classes
+ of service defined in this node."
+
+ ::= { appnCos 3 }
+
+appnCosNodeRowEntry OBJECT-TYPE
+ SYNTAX AppnCosNodeRowEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 84]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "A node entry for a given class of service."
+
+ INDEX
+ {appnCosNodeRowName,
+ appnCosNodeRowIndex}
+
+ ::= { appnCosNodeRowTable 1 }
+
+AppnCosNodeRowEntry ::= SEQUENCE {
+ appnCosNodeRowName SnaClassOfServiceName,
+ appnCosNodeRowIndex INTEGER,
+ appnCosNodeRowWgt DisplayString,
+ appnCosNodeRowResistMin INTEGER,
+ appnCosNodeRowResistMax INTEGER,
+ appnCosNodeRowMinCongestAllow INTEGER,
+ appnCosNodeRowMaxCongestAllow INTEGER
+ }
+
+appnCosNodeRowName OBJECT-TYPE
+ SYNTAX SnaClassOfServiceName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for this class of service."
+
+ ::= { appnCosNodeRowEntry 1 }
+
+appnCosNodeRowIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Subindex under appnCosNodeRowName, corresponding to a row in
+ the node table for the class of service identified in
+ appnCosNodeRowName.
+
+ For each class of service, this subindex orders rows in the
+ appnCosNodeRowTable in the same order as that used for route
+ calculation in the APPN node."
+
+ ::= { appnCosNodeRowEntry 2 }
+
+appnCosNodeRowWgt OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Weight to be associated with the nodes that fit the criteria
+
+
+
+Clouston & Moore Standards Track [Page 85]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ specified by this node row.
+
+ This value can either be a character representation of an
+ integer, or a formula for calculating the weight."
+
+ ::= { appnCosNodeRowEntry 3 }
+
+appnCosNodeRowResistMin OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum route addition resistance value for this node.
+ Range of values is 0-255. The lower the value, the more
+ desirable the node is for intermediate routing."
+
+ ::= { appnCosNodeRowEntry 4 }
+
+appnCosNodeRowResistMax OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum route addition resistance value for this node.
+ Range of values is 0-255. The lower the value, the more
+ desirable the node is for intermediate routing."
+
+ ::= { appnCosNodeRowEntry 5 }
+
+appnCosNodeRowMinCongestAllow OBJECT-TYPE
+ SYNTAX INTEGER (0..1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether low congestion will be tolerated. This
+ object and appnCosNodeRowMaxCongestAllow together delineate a
+ range of acceptable congestion states for a node. For the
+ ordered pair (minimum congestion allowed, maximum congestion
+ allowed), the values are interpreted as follows:
+
+ - (0,0): only low congestion is acceptable
+ - (0,1): either low or high congestion is acceptable
+ - (1,1): only high congestion is acceptable.
+
+ Note that the combination (1,0) is not defined, since it
+ would identify a range whose lower bound was high congestion
+ and whose upper bound was low congestion."
+
+
+
+
+Clouston & Moore Standards Track [Page 86]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnCosNodeRowEntry 6 }
+
+appnCosNodeRowMaxCongestAllow OBJECT-TYPE
+ SYNTAX INTEGER (0..1)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether low congestion will be tolerated. This
+ object and appnCosNodeRowMinCongestAllow together delineate a
+ range of acceptable congestion states for a node. For the
+ ordered pair (minimum congestion allowed, maximum congestion
+ allowed), the values are interpreted as follows:
+
+ - (0,0): only low congestion is acceptable
+ - (0,1): either low or high congestion is acceptable
+ - (1,1): only high congestion is acceptable.
+
+ Note that the combination (1,0) is not defined, since it
+ would identify a range whose lower bound was high congestion
+ and whose upper bound was low congestion."
+
+ ::= { appnCosNodeRowEntry 7 }
+
+
+-- *********************************************************************
+appnCosTgRowTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnCosTgRowEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table containing all the TG-row information for all classes of
+ service defined in this node."
+
+ ::= { appnCos 4 }
+
+appnCosTgRowEntry OBJECT-TYPE
+ SYNTAX AppnCosTgRowEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TG entry for a given class of service."
+
+ INDEX
+ {appnCosTgRowName,
+ appnCosTgRowIndex}
+
+ ::= { appnCosTgRowTable 1 }
+
+
+
+
+Clouston & Moore Standards Track [Page 87]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+AppnCosTgRowEntry ::= SEQUENCE {
+ appnCosTgRowName SnaClassOfServiceName,
+ appnCosTgRowIndex INTEGER,
+ appnCosTgRowWgt DisplayString,
+ appnCosTgRowEffCapMin AppnTgEffectiveCapacity,
+ appnCosTgRowEffCapMax AppnTgEffectiveCapacity,
+ appnCosTgRowConnCostMin INTEGER,
+ appnCosTgRowConnCostMax INTEGER,
+ appnCosTgRowByteCostMin INTEGER,
+ appnCosTgRowByteCostMax INTEGER,
+ appnCosTgRowSecurityMin AppnTgSecurity,
+ appnCosTgRowSecurityMax AppnTgSecurity,
+ appnCosTgRowDelayMin AppnTgDelay,
+ appnCosTgRowDelayMax AppnTgDelay,
+ appnCosTgRowUsr1Min INTEGER,
+ appnCosTgRowUsr1Max INTEGER,
+ appnCosTgRowUsr2Min INTEGER,
+ appnCosTgRowUsr2Max INTEGER,
+ appnCosTgRowUsr3Min INTEGER,
+ appnCosTgRowUsr3Max INTEGER
+ }
+
+appnCosTgRowName OBJECT-TYPE
+ SYNTAX SnaClassOfServiceName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Administratively assigned name for this class of service."
+
+ ::= { appnCosTgRowEntry 1 }
+
+appnCosTgRowIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Subindex under appnCosTgRowName, corresponding to a row in the
+ TG table for the class of service identified in
+ appnCosTgRowName.
+
+ For each class of service, this subindex orders rows in the
+ appnCosTgRowTable in the same order as that used for route
+ calculation in the APPN node."
+
+ ::= { appnCosTgRowEntry 2 }
+
+appnCosTgRowWgt OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+
+
+
+Clouston & Moore Standards Track [Page 88]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Weight to be associated with the TGs that fit the criteria
+ specified by this TG row.
+
+ This value can either be a character representation of an
+ integer, or a formula for calculating the weight."
+
+ ::= { appnCosTgRowEntry 3 }
+
+appnCosTgRowEffCapMin OBJECT-TYPE
+ SYNTAX AppnTgEffectiveCapacity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum acceptable capacity for this class of service."
+
+ ::= { appnCosTgRowEntry 4 }
+
+appnCosTgRowEffCapMax OBJECT-TYPE
+ SYNTAX AppnTgEffectiveCapacity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum acceptable capacity for this class of service."
+
+ ::= { appnCosTgRowEntry 5 }
+
+appnCosTgRowConnCostMin OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum acceptable cost per connect time for this class of
+ service.
+
+ Cost per connect time: a value representing the relative
+ cost per unit of time to use this TG. Range is from 0, which
+ means no cost, to 255."
+
+ ::= { appnCosTgRowEntry 6 }
+
+appnCosTgRowConnCostMax OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 89]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Maximum acceptable cost per connect time for this class of
+ service.
+
+ Cost per connect time: a value representing the relative
+ cost per unit of time to use this TG. Range is from 0, which
+ means no cost, to 255."
+
+ ::= { appnCosTgRowEntry 7 }
+
+appnCosTgRowByteCostMin OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum acceptable cost per byte transmitted for this class
+ of service.
+
+ Cost per byte transmitted: a value representing the relative
+ cost per unit of time to use this TG. Range is from 0, which
+ means no cost, to 255."
+
+ ::= { appnCosTgRowEntry 8 }
+
+appnCosTgRowByteCostMax OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum acceptable cost per byte transmitted for this class
+ of service.
+
+ Cost per byte transmitted: a value representing the relative
+ cost of transmitting a byte over this TG. Range is from 0,
+ which means no cost, to 255."
+
+ ::= { appnCosTgRowEntry 9 }
+
+appnCosTgRowSecurityMin OBJECT-TYPE
+ SYNTAX AppnTgSecurity
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum acceptable security for this class of service."
+
+ ::= { appnCosTgRowEntry 10 }
+
+appnCosTgRowSecurityMax OBJECT-TYPE
+ SYNTAX AppnTgSecurity
+
+
+
+Clouston & Moore Standards Track [Page 90]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum acceptable security for this class of service."
+
+ ::= { appnCosTgRowEntry 11 }
+
+appnCosTgRowDelayMin OBJECT-TYPE
+ SYNTAX AppnTgDelay
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum acceptable propagation delay for this class of
+ service."
+
+ ::= { appnCosTgRowEntry 12 }
+
+appnCosTgRowDelayMax OBJECT-TYPE
+ SYNTAX AppnTgDelay
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum acceptable propagation delay for this class of
+ service."
+
+ ::= { appnCosTgRowEntry 13 }
+
+appnCosTgRowUsr1Min OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum acceptable value for this user-defined
+ characteristic."
+
+ ::= { appnCosTgRowEntry 14 }
+
+appnCosTgRowUsr1Max OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum acceptable value for this user-defined
+ characteristic."
+
+ ::= { appnCosTgRowEntry 15 }
+
+appnCosTgRowUsr2Min OBJECT-TYPE
+
+
+
+Clouston & Moore Standards Track [Page 91]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum acceptable value for this user-defined
+ characteristic."
+
+ ::= { appnCosTgRowEntry 16 }
+
+appnCosTgRowUsr2Max OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum acceptable value for this user-defined
+ characteristic."
+
+ ::= { appnCosTgRowEntry 17 }
+
+appnCosTgRowUsr3Min OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum acceptable value for this user-defined
+ characteristic."
+
+ ::= { appnCosTgRowEntry 18 }
+
+appnCosTgRowUsr3Max OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum acceptable value for this user-defined
+ characteristic."
+
+ ::= { appnCosTgRowEntry 19 }
+
+-- *********************************************************************
+-- Intermediate Session Information
+-- *********************************************************************
+appnSessIntermediate OBJECT IDENTIFIER ::= { appnObjects 6 }
+
+-- *********************************************************************
+-- Intermediate Session Information Global Objects
+-- *********************************************************************
+-- The following simple objects allow the collection of intermediate
+
+
+
+Clouston & Moore Standards Track [Page 92]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+-- session Information to be started and stopped.
+-- *********************************************************************
+appnIsInGlobal OBJECT IDENTIFIER ::= { appnSessIntermediate 1 }
+
+appnIsInGlobeCtrAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2),
+ ready(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Object by which a Management Station can deactivate or
+ activate capture of intermediate-session counts and names, by
+ setting the value to notActive(1) or active(2), respectively.
+ The value ready(3) is returned on GET operations until a SET
+ has been processed; after that the value received on the most
+ recent SET is returned.
+
+ The counts referred to here are the eight objects in the
+ AppnIsInTable, from appnIsInP2SFmdPius through
+ appnIsInS2PNonFmdBytes. The names are the four objects in this
+ table, from appnIsInPriLuName through appnIsInCosName.
+
+ Setting this object to the following values has the following
+ effects:
+
+ notActive(1) stop collecting count data. If a count
+ is queried, it returns the value 0.
+ Collection of names may, but need not be,
+ disabled.
+ active(2) start collecting count data. If it is
+ supported, collection of names is enabled."
+
+ ::= { appnIsInGlobal 1 }
+
+appnIsInGlobeCtrOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether or not the intermediate session counts
+ are active. The counts referred to here are the eight
+ objects in the AppnIsInTable, from appnIsInP2SFmdPius through
+
+
+
+Clouston & Moore Standards Track [Page 93]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnIsInS2PNonFmdBytes. These eight counts are of type
+ Unsigned32 rather than Counter32 because when this object
+ enters the notActive state, either because a Management
+ Station has set appnInInGlobeCtrAdminStatus to notActive or
+ because of a locally-initiated transition, the counts are
+ all reset to 0.
+
+ The values for this object are:
+
+ notActive(1): collection of counts is not active; if it
+ is queried, a count returns the value 0.
+ active(2): collection of counts is active."
+
+ ::= { appnIsInGlobal 2 }
+
+appnIsInGlobeCtrStatusTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "hundredths of a second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time since the appnIsInGlobeCtrOperStatus object last
+ changed, measured in hundredths of a second. This time can be
+ used to identify when this change occurred in relation to other
+ events in the agent, such as the last time the APPN node was
+ re-initialized."
+
+ ::= { appnIsInGlobal 3 }
+
+appnIsInGlobeRscv OBJECT-TYPE
+ SYNTAX INTEGER {
+ notActive(1),
+ active(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the current route selection control vector (RSCV)
+ collection option in effect, and allows a Management Station to
+ change the option.
+
+ The values for this object are:
+
+ notActive(1): collection of route selection control vectors
+ is not active.
+ active(2): collection of route selection control vectors
+ is active."
+
+
+
+
+Clouston & Moore Standards Track [Page 94]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnIsInGlobal 4 }
+
+appnIsInGlobeRscvTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "hundredths of a second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time since the appnIsInGlobeRscv object last changed,
+ measured in hundredths of a second. This time can be used to
+ identify when this change occurred in relation to other events
+ in the agent, such as the last time the APPN node was
+ re-initialized."
+
+ ::= { appnIsInGlobal 5 }
+
+
+appnIsInGlobeActSess OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "sessions"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of currently active intermediate sessions."
+
+ ::= { appnIsInGlobal 6 }
+
+appnIsInGlobeHprBfActSess OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "sessions"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of currently active HPR intermediate sessions."
+
+ ::= { appnIsInGlobal 7 }
+
+-- *********************************************************************
+-- Intermediate Session Information Table
+-- *********************************************************************
+-- This table contains information on intermediate sessions
+-- which are currently active.
+-- *********************************************************************
+appnIsInTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnIsInEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 95]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Intermediate Session Information Table"
+
+ ::= { appnSessIntermediate 2 }
+
+appnIsInEntry OBJECT-TYPE
+ SYNTAX AppnIsInEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of Intermediate Session Information Table."
+
+ INDEX
+ { appnIsInFqCpName,
+ appnIsInPcid }
+
+ ::= { appnIsInTable 1 }
+
+AppnIsInEntry ::= SEQUENCE {
+ appnIsInFqCpName SnaControlPointName,
+ appnIsInPcid OCTET STRING,
+
+ appnIsInSessState INTEGER,
+ appnIsInPriLuName DisplayString,
+ appnIsInSecLuName DisplayString,
+ appnIsInModeName SnaModeName,
+ appnIsInCosName SnaClassOfServiceName,
+ appnIsInTransPriority INTEGER,
+
+ appnIsInSessType INTEGER,
+ appnIsInSessUpTime TimeTicks,
+ appnIsInCtrUpTime TimeTicks,
+
+ appnIsInP2SFmdPius Unsigned32,
+ appnIsInS2PFmdPius Unsigned32,
+ appnIsInP2SNonFmdPius Unsigned32,
+ appnIsInS2PNonFmdPius Unsigned32,
+ appnIsInP2SFmdBytes Unsigned32,
+ appnIsInS2PFmdBytes Unsigned32,
+ appnIsInP2SNonFmdBytes Unsigned32,
+ appnIsInS2PNonFmdBytes Unsigned32,
+
+ appnIsInPsAdjCpName SnaControlPointName,
+ appnIsInPsAdjTgNum INTEGER,
+ appnIsInPsSendMaxBtuSize INTEGER,
+ appnIsInPsSendPacingType INTEGER,
+ appnIsInPsSendRpc Gauge32,
+ appnIsInPsSendNxWndwSize Gauge32,
+ appnIsInPsRecvPacingType INTEGER,
+
+
+
+Clouston & Moore Standards Track [Page 96]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnIsInPsRecvRpc Gauge32,
+ appnIsInPsRecvNxWndwSize Gauge32,
+
+ appnIsInSsAdjCpName SnaControlPointName,
+ appnIsInSsAdjTgNum INTEGER,
+ appnIsInSsSendMaxBtuSize INTEGER,
+ appnIsInSsSendPacingType INTEGER,
+ appnIsInSsSendRpc Gauge32,
+ appnIsInSsSendNxWndwSize Gauge32,
+ appnIsInSsRecvPacingType INTEGER,
+ appnIsInSsRecvRpc Gauge32,
+ appnIsInSsRecvNxWndwSize Gauge32,
+
+ appnIsInRouteInfo OCTET STRING,
+
+ appnIsInRtpNceId OCTET STRING,
+ appnIsInRtpTcid OCTET STRING
+ }
+
+appnIsInFqCpName OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The network-qualified control point name of the node at which
+ the session and PCID originated. For APPN and LEN nodes, this
+ is either CP name of the APPN node at which the origin LU is
+ located or the CP name of the NN serving the LEN node at which
+ the origin LU is located. For resources served by a dependent
+ LU requester (DLUR), it is the name of the owning system
+ services control point (SSCP)."
+
+ ::= { appnIsInEntry 1 }
+
+appnIsInPcid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The procedure correlation identifier (PCID) of a session. It
+ is an 8-byte value assigned by the primary LU."
+
+ ::= { appnIsInEntry 2 }
+
+appnIsInSessState OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ pendactive(2),
+
+
+
+Clouston & Moore Standards Track [Page 97]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ active(3),
+ pendinact(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the state of the session:
+
+ inactive(1) - session is inactive
+ pendactive(2) - session is pending active
+ active(3) - session is active
+ pendinact(4) - session is pending inactive
+
+ Active sessions can be deactivated by setting this object
+ to inactive(1)."
+
+ ::= { appnIsInEntry 3 }
+
+appnIsInPriLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary LU name of the session. A zero-length
+ string indicates that this name is not available."
+
+ ::= { appnIsInEntry 4 }
+
+appnIsInSecLuName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..17))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary LU name of the session. A zero-length
+ string indicates that this name is not available."
+
+ ::= { appnIsInEntry 5 }
+
+appnIsInModeName OBJECT-TYPE
+ SYNTAX SnaModeName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The mode name used for this session."
+
+ ::= { appnIsInEntry 6 }
+
+appnIsInCosName OBJECT-TYPE
+
+
+
+Clouston & Moore Standards Track [Page 98]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ SYNTAX SnaClassOfServiceName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Class of Service (COS) name used for this session."
+
+ ::= { appnIsInEntry 7 }
+
+appnIsInTransPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(1), --X'01'
+ medium(2), --X'02'
+ high(3), --X'03'
+ network(4) --X'04'
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmission priority for this class of service. Values are:
+
+ low(1) - (X'01'): low priority
+ medium(2) - (X'02'): medium priority
+ high(3) - (X'03'): high priority
+ network(4) - (X'04'): network priority"
+
+ ::= { appnIsInEntry 8 }
+
+appnIsInSessType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ lu62(2),
+ lu0thru3(3),
+ lu62dlur(4),
+ lu0thru3dlur(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of intermediate session. Defined values are
+
+ unknown The session type is not known.
+
+ lu62 A session between LUs of type 6.2
+ (as indicated by the LU type in Bind)
+
+ lu0thru3 A session between LUs of type 0, 1, 2, or 3
+ (as indicated by the LU type in Bind)
+
+
+
+
+Clouston & Moore Standards Track [Page 99]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ lu62dlur A session between LUs of type 6.2
+ (as indicated by the LU type in Bind).
+ One of the LUs is a dependent LU supported
+ by the dependent LU requester (DLUR)
+ function at this node.
+
+ lu0thru3dlur A session between LUs of type 0, 1, 2, or 3
+ (as indicated by the LU type in Bind)
+ One of the LUs is a dependent LU supported
+ by the dependent LU requester (DLUR)
+ function at this node."
+
+ ::= { appnIsInEntry 9 }
+
+appnIsInSessUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Length of time the session has been active, measured in
+ hundredths of a second."
+
+ ::= { appnIsInEntry 10 }
+
+appnIsInCtrUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Length of time the session counters have been active, measured
+ in hundredths of a second."
+
+ ::= { appnIsInEntry 11 }
+
+appnIsInP2SFmdPius OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "path information units (PIUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of function management data (FMD) path information
+ units (PIUs) sent from the Primary LU to the Secondary LU since
+ the counts were last activated."
+
+ ::= { appnIsInEntry 12 }
+
+appnIsInS2PFmdPius OBJECT-TYPE
+ SYNTAX Unsigned32
+
+
+
+Clouston & Moore Standards Track [Page 100]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ UNITS "path information units (PIUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of FMD PIUs sent from the Secondary LU to the Primary
+ LU since the counts were last activated."
+
+ ::= { appnIsInEntry 13 }
+
+appnIsInP2SNonFmdPius OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "path information units (PIUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of non-FMD PIUs sent from the Primary LU to the
+ Secondary LU since the counts were last activated."
+
+ ::= { appnIsInEntry 14 }
+
+appnIsInS2PNonFmdPius OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "path information units (PIUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of non-FMD PIUs sent from the Secondary LU to the
+ Primary LU since the counts were last activated."
+
+ ::= { appnIsInEntry 15 }
+
+appnIsInP2SFmdBytes OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of FMD bytes sent from the Primary LU to the Secondary
+ LU since the counts were last activated."
+
+ ::= { appnIsInEntry 16 }
+
+appnIsInS2PFmdBytes OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+Clouston & Moore Standards Track [Page 101]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ "Number of FMD bytes sent from the Secondary LU to the Primary
+ LU since the counts were last activated."
+
+ ::= { appnIsInEntry 17 }
+
+appnIsInP2SNonFmdBytes OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of non-FMD bytes sent from the Primary LU to the
+ Secondary LU since the counts were last activated."
+
+ ::= { appnIsInEntry 18 }
+
+appnIsInS2PNonFmdBytes OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of non-FMD bytes sent from the Secondary LU to the
+ Primary LU since the counts were last activated."
+
+ ::= { appnIsInEntry 19 }
+
+appnIsInPsAdjCpName OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage adjacent CP name of this session. If the
+ session stage traverses an RTP connection, the CP name of the
+ remote RTP endpoint is returned."
+
+ ::= { appnIsInEntry 20 }
+
+appnIsInPsAdjTgNum OBJECT-TYPE
+ SYNTAX INTEGER (0..300)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage adjacent transmission group (TG) number
+ associated with this session. If the session stage traverses
+ an RTP connection, the value 256 is returned.
+
+ Values between 257 and 300 are available for other possible
+
+
+
+Clouston & Moore Standards Track [Page 102]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ TG 'stand-ins' that may be added to APPN in the future."
+
+ ::= { appnIsInEntry 21 }
+
+appnIsInPsSendMaxBtuSize OBJECT-TYPE
+ SYNTAX INTEGER (99..32767)
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage maximum basic transmission unit (BTU) size
+ for sending data."
+
+ ::= { appnIsInEntry 22 }
+
+appnIsInPsSendPacingType OBJECT-TYPE
+ SYNTAX INTEGER {
+ fixed(1),
+ adaptive(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage type of pacing being used for sending data."
+
+ ::= { appnIsInEntry 23 }
+
+appnIsInPsSendRpc OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "message units (MUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage send residual pace count. This represents
+ the primary stage number of message units (MUs) that can still
+ be sent in the current session window."
+
+ ::= { appnIsInEntry 24 }
+
+appnIsInPsSendNxWndwSize OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "message units (MUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage size of the next window which will be used
+ to send data."
+
+
+
+
+Clouston & Moore Standards Track [Page 103]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnIsInEntry 25 }
+
+appnIsInPsRecvPacingType OBJECT-TYPE
+ SYNTAX INTEGER {
+ fixed(1),
+ adaptive(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage type of pacing being used for receiving
+ data."
+
+ ::= { appnIsInEntry 26 }
+
+appnIsInPsRecvRpc OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "message units (MUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage receive residual pace count. This
+ represents the primary stage number of message units (MUs) that
+ can still be received in the current session window."
+
+ ::= { appnIsInEntry 27 }
+
+appnIsInPsRecvNxWndwSize OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "message units (MUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary stage size of the next window which will be used
+ to receive data."
+
+ ::= { appnIsInEntry 28 }
+
+appnIsInSsAdjCpName OBJECT-TYPE
+ SYNTAX SnaControlPointName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage adjacent CP name of this session. If the
+ session stage traverses an RTP connection, the CP name of the
+ remote RTP endpoint is returned."
+
+ ::= { appnIsInEntry 29 }
+
+
+
+Clouston & Moore Standards Track [Page 104]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnIsInSsAdjTgNum OBJECT-TYPE
+ SYNTAX INTEGER (0..300)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage adjacent transmission group (TG) number
+ associated with this session. If the session stage traverses
+ an RTP connection, the value 256 is returned.
+
+ Values between 257 and 300 are available for other possible
+ TG 'stand-ins' that may be added to APPN in the future."
+
+ ::= { appnIsInEntry 30 }
+
+appnIsInSsSendMaxBtuSize OBJECT-TYPE
+ SYNTAX INTEGER (99..32767)
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage maximum basic transmission unit (BTU) size
+ for sending data."
+
+ ::= { appnIsInEntry 31 }
+
+appnIsInSsSendPacingType OBJECT-TYPE
+ SYNTAX INTEGER {
+ fixed(1),
+ adaptive(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage type of pacing being used for sending
+ data."
+
+ ::= { appnIsInEntry 32 }
+
+appnIsInSsSendRpc OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "message units (MUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage send residual pace count. This represents
+ the secondary stage number of message units (MUs) that can
+ still be sent in the current session window."
+
+
+
+
+Clouston & Moore Standards Track [Page 105]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnIsInEntry 33 }
+
+appnIsInSsSendNxWndwSize OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "message units (MUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage size of the next window which will be used
+ to send data."
+
+ ::= { appnIsInEntry 34 }
+
+appnIsInSsRecvPacingType OBJECT-TYPE
+ SYNTAX INTEGER {
+ fixed(1),
+ adaptive(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage type of pacing being used for receiving
+ data."
+
+ ::= { appnIsInEntry 35 }
+
+appnIsInSsRecvRpc OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "message units (MUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage receive residual pace count. This
+ represents the secondary stage number of message units (MUs)
+ that can still be received in the current session window."
+
+ ::= { appnIsInEntry 36 }
+
+appnIsInSsRecvNxWndwSize OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "message units (MUs)"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary stage size of the next window which will be used
+ to receive data."
+
+ ::= { appnIsInEntry 37 }
+
+
+
+Clouston & Moore Standards Track [Page 106]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnIsInRouteInfo OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The route selection control vector (RSCV X'2B') used for this
+ session. It is present for APPN nodes; but is not present for
+ LEN nodes. The format of this vector is described in SNA
+ Formats. If no RSCV is available, a zero-length string is
+ returned."
+
+ ::= { appnIsInEntry 38 }
+
+appnIsInRtpNceId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The HPR local Network Connection Endpoint of the session."
+
+ ::= { appnIsInEntry 39 }
+
+appnIsInRtpTcid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The RTP connection local TCID of the session."
+
+ ::= { appnIsInEntry 40 }
+
+-- *********************************************************************
+-- Intermediate Session RTP Table
+-- *********************************************************************
+-- This table contains information on intermediate sessions that are
+-- being transported on Rapid Transport Protocol (RTP) connections by
+-- High Performance Routing (HPR).
+-- *********************************************************************
+appnIsRtpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AppnIsRtpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table indicating how many ISR sessions are transported by
+ each RTP connection."
+
+ ::= { appnSessIntermediate 3 }
+
+
+
+
+Clouston & Moore Standards Track [Page 107]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+appnIsRtpEntry OBJECT-TYPE
+ SYNTAX AppnIsRtpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of Intermediate Session RTP Table."
+
+ INDEX
+ { appnIsRtpNceId,
+ appnIsRtpTcid }
+
+ ::= { appnIsRtpTable 1 }
+
+AppnIsRtpEntry ::= SEQUENCE {
+ appnIsRtpNceId OCTET STRING,
+ appnIsRtpTcid OCTET STRING,
+ appnIsRtpSessions Gauge32
+ }
+
+appnIsRtpNceId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The local Network Connection Endpoint of the RTP connection."
+
+ ::= { appnIsRtpEntry 1 }
+
+appnIsRtpTcid OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The local TCID of the RTP connection."
+
+ ::= { appnIsRtpEntry 2 }
+
+appnIsRtpSessions OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "sessions"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of intermediate sessions using this RTP
+ connection."
+
+ ::= { appnIsRtpEntry 3 }
+
+
+
+
+Clouston & Moore Standards Track [Page 108]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+-- *********************************************************************
+ appnTraps OBJECT IDENTIFIER ::= { appnMIB 2 }
+-- *********************************************************************
+
+alertTrap NOTIFICATION-TYPE
+ OBJECTS { alertIdNumber, affectedObject }
+ STATUS current
+ DESCRIPTION
+ "This trap carries a 32-bit SNA Management Services (SNA/MS)
+ Alert ID Number, as specified in SNA/MS Formats."
+
+ ::= { appnTraps 1 }
+
+alertIdNumber OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (4))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "A 32-bit SNA Management Services (SNA/MS) Alert ID Number, as
+ specified in SNA/MS Formats."
+
+ ::= { appnTraps 2 }
+
+affectedObject OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The MIB object associated with the Alert condition, if there
+ is an object associated with it. If no associated object can
+ be identified, the value 0.0 is passed in the trap."
+
+ ::= { appnTraps 3 }
+
+-- *********************************************************************
+-- Conformance information
+-- *********************************************************************
+
+appnConformance OBJECT IDENTIFIER ::= {appnMIB 3 }
+
+appnCompliances OBJECT IDENTIFIER ::= {appnConformance 1 }
+appnGroups OBJECT IDENTIFIER ::= {appnConformance 2 }
+
+-- Compliance statements
+appnCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the SNMPv2 entities that
+
+
+
+Clouston & Moore Standards Track [Page 109]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ implement the APPN MIB."
+
+ MODULE -- this module
+
+-- Unconditionally mandatory groups
+ MANDATORY-GROUPS {
+ appnGeneralConfGroup,
+ appnPortConfGroup,
+ appnLinkConfGroup,
+ appnLocalTgConfGroup,
+ appnDirTableConfGroup
+ }
+
+-- Conditionally mandatory groups
+ GROUP appnNnUniqueConfGroup
+ DESCRIPTION
+ "The appnNnUniqueConfGroup is mandatory only for
+ network nodes."
+
+ GROUP appnEnUniqueConfGroup
+ DESCRIPTION
+ "The appnEnUniqueConfGroup is mandatory only for end
+ nodes."
+ GROUP appnVrnConfGroup
+ DESCRIPTION
+ "The appnVrnConfGroup is mandatory only for network
+ nodes and end nodes that implement virtual routing
+ node support."
+
+ GROUP appnNnTopoConfGroup
+ DESCRIPTION
+ "The appnNnTopoConfGroup is mandatory only for
+ network nodes."
+
+ GROUP appnLocalEnTopoConfGroup
+ DESCRIPTION
+ "The appnLocalEnTopoConfGroup is mandatory only for
+ network nodes."
+
+ GROUP appnLocalDirPerfConfGroup
+ DESCRIPTION
+ "The appnLocalDirPerfConfGroup is mandatory only for
+ APPN network nodes and end nodes."
+
+ GROUP appnCosConfGroup
+ DESCRIPTION
+ "The appnCosConfGroup is mandatory only for APPN
+ network nodes and end nodes."
+
+
+
+Clouston & Moore Standards Track [Page 110]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ GROUP appnIntSessConfGroup
+ DESCRIPTION
+ "The appnIntSessConfGroup is mandatory only for
+ network nodes."
+
+ GROUP appnHprBaseConfGroup
+ DESCRIPTION
+ "The appnHprBaseConfGroup is mandatory only for nodes
+ that implement the HPR base (APPN option set 1400)."
+
+ GROUP appnHprRtpConfGroup
+ DESCRIPTION
+ "The appnHprRtpConfGroup is mandatory only for nodes
+ that implement the HPR RTP tower (APPN option set
+ 1401)."
+
+ GROUP appnHprCtrlFlowsRtpConfGroup
+ DESCRIPTION
+ "The appnHprCtrlFlowsRtpConfGroup is mandatory only
+ for nodes that implement the HPR Control Flows over
+ RTP tower (APPN option set 1402)."
+
+ GROUP appnHprBfConfGroup
+ DESCRIPTION
+ "The appnHprBfConfGroup is mandatory only for nodes
+ that implement the APPN/HPR boundary function."
+
+ GROUP appnTrapConfGroup
+ DESCRIPTION
+ "Traps are optional for all nodes."
+
+ GROUP appnTrapNotifGroup
+ DESCRIPTION
+ "Traps are optional for all nodes."
+
+ ::= {appnCompliances 1 }
+
+-- Units of conformance
+appnGeneralConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnNodeCpName,
+ appnNodeMibVersion,
+ appnNodeId,
+ appnNodeType,
+ appnNodeUpTime,
+ appnNodeParallelTg,
+ appnNodeAdaptiveBindPacing,
+ appnNodeHprSupport,
+
+
+
+Clouston & Moore Standards Track [Page 111]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnNodeCounterDisconTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of
+ APPN general information and capabilities."
+
+ ::= { appnGroups 1 }
+
+appnPortConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnPortCommand,
+ appnPortOperState,
+ appnPortDlcType,
+ appnPortPortType,
+ appnPortSIMRIM,
+ appnPortLsRole,
+ appnPortNegotLs,
+ appnPortDynamicLinkSupport,
+ appnPortMaxRcvBtuSize,
+ appnPortMaxIframeWindow,
+ appnPortDefLsGoodXids,
+ appnPortDefLsBadXids,
+ appnPortDynLsGoodXids,
+ appnPortDynLsBadXids,
+ appnPortSpecific,
+ appnPortDlcLocalAddr,
+ appnPortCounterDisconTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of
+ APPN port information."
+
+ ::= { appnGroups 2 }
+
+appnLinkConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnLsCommand,
+ appnLsOperState,
+ appnLsPortName,
+ appnLsDlcType,
+ appnLsDynamic,
+ appnLsAdjCpName,
+ appnLsAdjNodeType,
+ appnLsTgNum,
+ appnLsLimResource,
+ appnLsActOnDemand,
+
+
+
+Clouston & Moore Standards Track [Page 112]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnLsMigration,
+ appnLsPartnerNodeId,
+ appnLsCpCpSessionSupport,
+ appnLsMaxSendBtuSize,
+ appnLsInXidBytes,
+ appnLsInMsgBytes,
+ appnLsInXidFrames,
+ appnLsInMsgFrames,
+ appnLsOutXidBytes,
+ appnLsOutMsgBytes,
+ appnLsOutXidFrames,
+ appnLsOutMsgFrames,
+ appnLsEchoRsps,
+ appnLsCurrentDelay,
+ appnLsMaxDelay,
+ appnLsMinDelay,
+ appnLsMaxDelayTime,
+ appnLsGoodXids,
+ appnLsBadXids,
+ appnLsSpecific,
+ appnLsActiveTime,
+ appnLsCurrentStateTime,
+ appnLsHprSup,
+ appnLsLocalAddr,
+ appnLsRemoteAddr,
+ appnLsRemoteLsName,
+ appnLsStatusTime,
+ appnLsStatusLsName,
+ appnLsStatusCpName,
+ appnLsStatusPartnerId,
+ appnLsStatusTgNum,
+ appnLsStatusGeneralSense,
+ appnLsStatusRetry,
+ appnLsStatusEndSense,
+ appnLsStatusXidLocalSense,
+ appnLsStatusXidRemoteSense,
+ appnLsStatusXidByteInError,
+ appnLsStatusXidBitInError,
+ appnLsStatusDlcType,
+ appnLsStatusLocalAddr,
+ appnLsStatusRemoteAddr,
+ appnLsCounterDisconTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of
+ APPN link information."
+
+
+
+
+Clouston & Moore Standards Track [Page 113]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ ::= { appnGroups 3 }
+
+appnLocalTgConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnLocalTgDestVirtual,
+ appnLocalTgDlcData,
+ appnLocalTgPortName,
+ appnLocalTgQuiescing,
+ appnLocalTgOperational,
+ appnLocalTgCpCpSession,
+ appnLocalTgEffCap,
+ appnLocalTgConnCost,
+ appnLocalTgByteCost,
+ appnLocalTgSecurity,
+ appnLocalTgDelay,
+ appnLocalTgUsr1,
+ appnLocalTgUsr2,
+ appnLocalTgUsr3,
+ appnLocalTgHprSup,
+ appnLocalTgIntersubnet
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of
+ APPN local TG information."
+
+ ::= { appnGroups 4 }
+
+appnDirTableConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnDirNnServerName,
+ appnDirLuOwnerName,
+ appnDirLuLocation,
+ appnDirType
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing the instrumentation of the
+ APPN directory database."
+
+ ::= { appnGroups 5 }
+
+appnNnUniqueConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnNodeNnCentralDirectory,
+ appnNodeNnTreeCache,
+ appnNodeNnRouteAddResist,
+ appnNodeNnIsr,
+
+
+
+Clouston & Moore Standards Track [Page 114]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnNodeNnFrsn,
+ appnNodeNnPeriBorderSup,
+ appnNodeNnInterchangeSup,
+ appnNodeNnExteBorderSup,
+ appnNodeNnSafeStoreFreq,
+ appnNodeNnRsn,
+ appnNodeNnCongested,
+ appnNodeNnIsrDepleted,
+ appnNodeNnQuiescing,
+ appnNodeNnGateway
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnNnUniqueConfGroup is mandatory only for network
+ nodes."
+
+ ::= { appnGroups 6 }
+
+appnEnUniqueConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnNodeEnModeCosMap,
+ appnNodeEnNnServer,
+ appnNodeEnLuSearch
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnEnUniqueConfGroup is mandatory only for end nodes."
+
+ ::= { appnGroups 7 }
+
+appnVrnConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnVrnPortName
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnVrnConfGroup is mandatory only for APPN network
+ nodes and end nodes."
+
+ ::= { appnGroups 8 }
+
+appnNnTopoConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnNnTopoMaxNodes,
+ appnNnTopoCurNumNodes,
+ appnNnTopoNodePurges,
+ appnNnTopoTgPurges,
+ appnNnTopoTotalTduWars,
+
+
+
+Clouston & Moore Standards Track [Page 115]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnNnNodeFREntryTimeLeft,
+ appnNnNodeFRType,
+ appnNnNodeFRRsn,
+ appnNnNodeFRRouteAddResist,
+ appnNnNodeFRCongested,
+ appnNnNodeFRIsrDepleted,
+ appnNnNodeFRQuiescing,
+ appnNnNodeFRGateway,
+ appnNnNodeFRCentralDirectory,
+ appnNnNodeFRIsr,
+ appnNnNodeFRGarbageCollect,
+ appnNnNodeFRHprSupport,
+ appnNnNodeFRPeriBorderSup,
+ appnNnNodeFRInterchangeSup,
+ appnNnNodeFRExteBorderSup,
+ appnNnTgFREntryTimeLeft,
+ appnNnTgFRDestVirtual,
+ appnNnTgFRDlcData,
+ appnNnTgFRRsn,
+ appnNnTgFROperational,
+ appnNnTgFRQuiescing,
+ appnNnTgFRCpCpSession,
+ appnNnTgFREffCap,
+ appnNnTgFRConnCost,
+ appnNnTgFRByteCost,
+ appnNnTgFRSecurity,
+ appnNnTgFRDelay,
+ appnNnTgFRUsr1,
+ appnNnTgFRUsr2,
+ appnNnTgFRUsr3,
+ appnNnTgFRGarbageCollect,
+ appnNnTgFRSubareaNum,
+ appnNnTgFRHprSup,
+ appnNnTgFRDestHprTrans,
+ appnNnTgFRTypeIndicator,
+ appnNnTgFRIntersubnet
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnNnTopoConfGroup is mandatory only for network
+ nodes."
+
+ ::= { appnGroups 9 }
+
+appnLocalEnTopoConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnLocalEnTgEntryTimeLeft,
+ appnLocalEnTgDestVirtual,
+
+
+
+Clouston & Moore Standards Track [Page 116]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnLocalEnTgDlcData,
+ appnLocalEnTgOperational,
+ appnLocalEnTgCpCpSession,
+ appnLocalEnTgEffCap,
+ appnLocalEnTgConnCost,
+ appnLocalEnTgByteCost,
+ appnLocalEnTgSecurity,
+ appnLocalEnTgDelay,
+ appnLocalEnTgUsr1,
+ appnLocalEnTgUsr2,
+ appnLocalEnTgUsr3
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnLocalEnTopoConfGroup is mandatory only for network
+ nodes."
+
+ ::= { appnGroups 10 }
+
+appnLocalDirPerfConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnDirMaxCaches,
+ appnDirCurCaches,
+ appnDirCurHomeEntries,
+ appnDirRegEntries,
+ appnDirInLocates,
+ appnDirInBcastLocates,
+ appnDirOutLocates,
+ appnDirOutBcastLocates,
+ appnDirNotFoundLocates,
+ appnDirNotFoundBcastLocates,
+ appnDirLocateOutstands
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnLocalDirPerfConfGroup is mandatory only for APPN
+ network nodes and end nodes."
+
+ ::= { appnGroups 11 }
+
+appnCosConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnCosModeCosName,
+ appnCosTransPriority,
+ appnCosNodeRowWgt,
+ appnCosNodeRowResistMin,
+ appnCosNodeRowResistMax,
+ appnCosNodeRowMinCongestAllow,
+
+
+
+Clouston & Moore Standards Track [Page 117]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnCosNodeRowMaxCongestAllow,
+ appnCosTgRowWgt,
+ appnCosTgRowEffCapMin,
+ appnCosTgRowEffCapMax,
+ appnCosTgRowConnCostMin,
+ appnCosTgRowConnCostMax,
+ appnCosTgRowByteCostMin,
+ appnCosTgRowByteCostMax,
+ appnCosTgRowSecurityMin,
+ appnCosTgRowSecurityMax,
+ appnCosTgRowDelayMin,
+ appnCosTgRowDelayMax,
+ appnCosTgRowUsr1Min,
+ appnCosTgRowUsr1Max,
+ appnCosTgRowUsr2Min,
+ appnCosTgRowUsr2Max,
+ appnCosTgRowUsr3Min,
+ appnCosTgRowUsr3Max
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnCosConfGroup is mandatory only for APPN network
+ nodes and end nodes."
+
+ ::= { appnGroups 12 }
+
+appnIntSessConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnIsInGlobeCtrAdminStatus,
+ appnIsInGlobeCtrOperStatus,
+ appnIsInGlobeCtrStatusTime,
+ appnIsInGlobeRscv,
+ appnIsInGlobeRscvTime,
+ appnIsInGlobeActSess,
+ appnIsInSessState,
+ appnIsInPriLuName,
+ appnIsInSecLuName,
+ appnIsInModeName,
+ appnIsInCosName,
+ appnIsInTransPriority,
+ appnIsInSessType,
+ appnIsInSessUpTime,
+ appnIsInCtrUpTime,
+ appnIsInP2SFmdPius,
+ appnIsInS2PFmdPius,
+ appnIsInP2SNonFmdPius,
+ appnIsInS2PNonFmdPius,
+ appnIsInP2SFmdBytes,
+
+
+
+Clouston & Moore Standards Track [Page 118]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnIsInS2PFmdBytes,
+ appnIsInP2SNonFmdBytes,
+ appnIsInS2PNonFmdBytes,
+ appnIsInPsAdjCpName,
+ appnIsInPsAdjTgNum,
+ appnIsInPsSendMaxBtuSize,
+ appnIsInPsSendPacingType,
+ appnIsInPsSendRpc,
+ appnIsInPsSendNxWndwSize,
+ appnIsInPsRecvPacingType,
+ appnIsInPsRecvRpc,
+ appnIsInPsRecvNxWndwSize,
+ appnIsInSsAdjCpName,
+ appnIsInSsAdjTgNum,
+ appnIsInSsSendMaxBtuSize,
+ appnIsInSsSendPacingType,
+ appnIsInSsSendRpc,
+ appnIsInSsSendNxWndwSize,
+ appnIsInSsRecvPacingType,
+ appnIsInSsRecvRpc,
+ appnIsInSsRecvNxWndwSize,
+ appnIsInRouteInfo
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnIntSessConfGroup is mandatory only for network
+ nodes."
+
+ ::= { appnGroups 13 }
+
+appnHprBaseConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnNodeHprIntRteSetups,
+ appnNodeHprIntRteRejects,
+ appnLsErrRecoSup,
+ appnLsForAnrLabel,
+ appnLsRevAnrLabel
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnHprBaseConfGroup is mandatory only for nodes that
+ implement the HPR base (APPN option set 1400)."
+
+ ::= { appnGroups 14 }
+
+appnHprRtpConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnNodeMaxSessPerRtpConn,
+
+
+
+Clouston & Moore Standards Track [Page 119]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ appnNodeHprOrgRteSetups,
+ appnNodeHprOrgRteRejects,
+ appnNodeHprEndRteSetups,
+ appnNodeHprEndRteRejects,
+ appnLsBfNceId
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnHprRtpConfGroup is mandatory only for nodes that
+ implement the HPR RTP tower (APPN option set 1401)."
+
+ ::= { appnGroups 15 }
+
+appnHprCtrlFlowsRtpConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnLsCpCpNceId,
+ appnLsRouteNceId
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnHprCtrlFlowsRtpConfGroup is mandatory only for nodes
+ that implement the HPR Control Flows over RTP tower (APPN
+ option set 1402)."
+
+ ::= { appnGroups 16 }
+
+appnHprBfConfGroup OBJECT-GROUP
+ OBJECTS {
+ appnIsInGlobeHprBfActSess,
+ appnIsInRtpNceId,
+ appnIsInRtpTcid,
+ appnIsRtpSessions
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnHprBfConfGroup is mandatory only for nodes that
+ implement the APPN/HPR boundary function."
+
+ ::= { appnGroups 17 }
+
+appnTrapConfGroup OBJECT-GROUP
+ OBJECTS {
+ alertIdNumber,
+ affectedObject
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnTrapConfGroup is optional for all APPN nodes. Nodes
+
+
+
+Clouston & Moore Standards Track [Page 120]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ implementing this group shall also implement the
+ appnTrapNotifGroup."
+
+ ::= { appnGroups 18 }
+
+appnTrapNotifGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ alertTrap
+ }
+ STATUS current
+ DESCRIPTION
+ "The appnTrapNotifGroup is optional for all APPN nodes.
+ Nodes implementing this group shall also implement the
+ appnTrapConfGroup."
+
+ ::= { appnGroups 19 }
+
+END
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Clouston & Moore Standards Track [Page 121]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+5. Acknowledgments
+
+ This MIB module is the product of the IETF SNA NAU MIB WG and the AIW
+ APPN/HPR MIBs SIG. Thanks to Wayne Clark, Cisco Systems; Jim Cobban,
+ Nortel; Rich Daugherty, IBM Corporation; Mark Regan, Cisco Systems;
+ and Leo Temoshenko, IBM Corporation, for their contributions and
+ review.
+
+6. References
+
+ [1] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
+ Waldbusser, "Structure of Management Information for version 2
+ of the Simple Network Management Protocol (SNMPv2)", RFC 1902,
+ January 1996.
+
+ [2] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
+ Waldbusser, "Textual Conventions for Version 2 of the Simple
+ Network Management Protocol (SNMPv2)", RFC 1903, January 1996.
+
+ [3] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
+ Waldbusser, "Conformance Statements for Version 2 of the Simple
+ Network Management Protocol (SNMPv2)", RFC 1904, January 1996.
+
+ [4] IBM, Systems Network Architecture Technical Overview, GC30-3073.
+
+ [5] IBM, Systems Network Architecture APPN Architecture Reference,
+ SC30-3422
+
+ [6] IBM, Systems Network Architecture Formats, SC30-3346.
+
+ [7] Allen, M., Clouston, B., Kielczewski, Z., Kwan, W., and B.
+ Moore, "Definition of Managed Objects for APPC", RFC 2051, Wall
+ Data Inc., Cisco Systems, Jupiter Technology Inc., IBM
+ Corporation, December 1995.
+
+ [8] Kielczewski, Z., Kostick D., and K. Shih, "Definition of Managed
+ Objects for SNA NAUs using SMIv2", RFC 1666, Eicon Technology
+ Corporation, Bell Communications Research, Novell, August 1994.
+
+ [9] Clouston, B., and B. Moore, "Definitions of Managed Objects for
+ DLUR", November 1996.
+
+ [10] Clouston, B., and B. Moore, "Definitions of Managed Objects for
+ HPR", November 1996.
+
+
+
+
+
+
+
+Clouston & Moore Standards Track [Page 122]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+ [11] SNA DLC Services MIB Working Group, Hilgeman, J., Nix, S.,
+ Bartky, A., and W. Clark, "Definitions of Managed Objects for
+ SNA Data Link Control (SDLC) using SMIv2", RFC 1747, January
+ 1995. URL: ftp://ds.internic.net/rfc/rfc1747.txt
+
+ [12] SNA DLC Services MIB Working Group, Berl, S., Nix, S., and W.
+ Clark, "Definitions of Managed Objects for SNA Data Link
+ Control: LLC", May 1995.
+
+ [13] Chen, D., Gayek, P., and S. Nix, "Definitions of Managed Objects
+ for Data Link Switching using SNMPv2", RFC 2024, October 1995.
+
+ [14] IBM, Systems Network Architecture Management Services Formats,
+ GC31-8302.
+
+7. Security Considerations
+
+ In most cases, MIBs are not themselves security risks; if SNMP
+ security is operating as intended, the use of a MIB to view
+ information about a system, or to change some parameter at the
+ system, is a tool, not a threat.
+
+ None of the read-only objects in the APPN MIB reports a password,
+ user data, or anything else that is particularly sensitive. Some
+ enterprises view their network configuration itself, as well as
+ information about network usage and performance, as corporate assets;
+ such enterprises may wish to restrict SNMP access to most of the
+ objects in the MIB.
+
+ Four of the read-write objects in the MIB can affect network
+ operations; it is recommended that SNMP access to these objects be
+ restricted. The four objects are:
+
+ o appnNodeNnSafeStoreFreq: Setting this object to 0, or to a very
+ large value, effectively turns off safe storing of topology
+ data.
+
+ o appnPortCommand, appnLsCommand: These two objects allow an APPN
+ port or link station to be activated, deactivated, or recycled
+ via an SNMP operation. The latter two operations may disrupt
+ current users of the network.
+
+ o appnIsInSessState: Setting this object to 'inactive' causes an
+ active SNA session to be deactivated.
+
+ Other read-write objects control the gathering of network
+ management data; controlling access to these objects is less
+ critical.
+
+
+
+Clouston & Moore Standards Track [Page 123]
+
+RFC 2155 Definitions of Managed Objects for APPN June 1997
+
+
+8. Authors' Addresses
+
+ Bob Clouston
+ Cisco Systems
+ 7025 Kit Creek Road
+ P.O. Box 14987
+ Research Triangle Park, NC 27709, USA
+
+ Tel: 1 919 472 2333
+ E-mail: clouston@cisco.com
+
+
+ Bob Moore
+ IBM Corporation
+ 800 Park Offices Drive
+ CNMA/664
+ P.O. Box 12195
+ Research Triangle Park, NC 27709, USA
+
+ Tel: 1 919 254 4436
+ E-mail: remoore@ralvm6.vnet.ibm.com
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Clouston & Moore Standards Track [Page 124]
+