summaryrefslogtreecommitdiff
path: root/doc/rfc/rfc2670.txt
diff options
context:
space:
mode:
authorThomas Voss <mail@thomasvoss.com> 2024-11-27 20:54:24 +0100
committerThomas Voss <mail@thomasvoss.com> 2024-11-27 20:54:24 +0100
commit4bfd864f10b68b71482b35c818559068ef8d5797 (patch)
treee3989f47a7994642eb325063d46e8f08ffa681dc /doc/rfc/rfc2670.txt
parentea76e11061bda059ae9f9ad130a9895cc85607db (diff)
doc: Add RFC documents
Diffstat (limited to 'doc/rfc/rfc2670.txt')
-rw-r--r--doc/rfc/rfc2670.txt4035
1 files changed, 4035 insertions, 0 deletions
diff --git a/doc/rfc/rfc2670.txt b/doc/rfc/rfc2670.txt
new file mode 100644
index 0000000..880ce74
--- /dev/null
+++ b/doc/rfc/rfc2670.txt
@@ -0,0 +1,4035 @@
+
+
+
+
+
+
+Network Working Group M. St. Johns, Ed.
+Request for Comments: 2670 @Home Network
+Category: Proposed Standard August 1999
+
+
+ Radio Frequency (RF) Interface Management Information Base
+ for MCNS/DOCSIS compliant RF interfaces
+
+
+Status of this Memo
+
+ This document specifies an Internet standards track protocol for the
+ Internet community, and requests discussion and suggestions for
+ improvements. Please refer to the current edition of the "Internet
+ Official Protocol Standards" (STD 1) for the standardization state
+ and status of this protocol. Distribution of this memo is unlimited.
+
+Copyright Notice
+
+ Copyright (C) The Internet Society (1999). All Rights Reserved.
+
+Abstract
+
+ This memo defines a portion of the Management Information Base (MIB)
+ for use with network management protocols in the Internet community.
+ In particular, it defines a basic set of managed objects for SNMP-
+ based management of MCNS/DOCSIS compliant Radio Frequency (RF)
+ interfaces.
+
+ This memo specifies a MIB module in a manner that is compliant to the
+ SNMP SMIv2 [5][6][7]. The set of objects are consistent with the
+ SNMP framework and existing SNMP standards.
+
+ This memo is a product of the IPCDN working group within the Internet
+ Engineering Task Force. Comments are solicited and should be
+ addressed to the working group's mailing list at ipcdn@terayon.com
+ and/or the author.
+
+ Table of Contents
+
+ 1 The SNMP Management Framework ................................... 3
+ 2 Glossary ........................................................ 4
+ 2.1 CATV .......................................................... 4
+ 2.2 Channel ....................................................... 4
+ 2.3 CM ............................................................ 4
+ 2.4 CMTS .......................................................... 4
+ 2.5 Codeword ...................................................... 4
+ 2.6 Data Packet ................................................... 4
+
+
+
+St. Johns Standard [Page 1]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ 2.7 dBmV .......................................................... 4
+ 2.8 DOCSIS ........................................................ 5
+ 2.9 Downstream .................................................... 5
+ 2.10 Head-end ..................................................... 5
+ 2.11 MAC Packet ................................................... 5
+ 2.12 MCNS ......................................................... 5
+ 2.13 Mini-slot .................................................... 5
+ 2.14 QPSK ......................................................... 5
+ 2.15 QAM .......................................................... 5
+ 2.16 RF ........................................................... 5
+ 2.17 Symbol-times ................................................. 5
+ 2.18 Upstream ..................................................... 6
+ 3 Overview ........................................................ 6
+ 3.1 Structure of the MIB .......................................... 6
+ 3.1.1 docsIfBaseObjects ........................................... 6
+ 3.1.2 docsIfCmObjects ............................................. 7
+ 3.1.3 docsIfCmtsObjects ........................................... 7
+ 3.2 Relationship to the Interfaces MIB ............................ 7
+ 3.2.1 Layering Model .............................................. 7
+ 3.2.2 Virtual Circuits ............................................ 8
+ 3.2.3 ifTestTable ................................................. 9
+ 3.2.4 ifRcvAddressTable ........................................... 9
+ 3.2.5 ifEntry ..................................................... 9
+ 3.2.5.1 ifEntry for Downstream interfaces ......................... 9
+ 3.2.5.1.1 ifEntry for Downstream interfaces in Cable Modem
+ Termination Systems .......................................... 9
+ 3.2.5.1.2 ifEntry for Downstream interfaces in Cable Modems ...... 11
+ 3.2.5.2 ifEntry for Upstream interfaces .......................... 12
+ 3.2.5.2.1 ifEntry for Upstream interfaces in Cable Modem
+ Termination Systems ......................................... 12
+ 3.2.5.2.2 ifEntry for Upstream interfaces in Cable Modems ........ 14
+ 3.2.5.3 ifEntry for the MAC Layer ................................ 15
+ 4 Definitions .................................................... 18
+ 5 Acknowledgments ................................................ 69
+ 6 References ..................................................... 69
+ 7 Security Considerations ........................................ 70
+ 8 Intellectual Property .......................................... 71
+ 9 Author's Address ............................................... 71
+ 10 Full Copyright Statement ...................................... 72
+
+
+
+
+
+
+
+
+
+
+
+
+St. Johns Standard [Page 2]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+1. The SNMP Management Framework
+
+ The SNMP Management Framework presently consists of five major
+ components:
+
+ o An overall architecture, described in RFC 2571 [1].
+
+ o Mechanisms for describing and naming objects and events for the
+ purpose of management. The first version of this Structure of
+ Management Information (SMI) is called SMIv1 and described in STD
+ 16, RFC 1155 [2], STD 16, RFC 1212 [3] and RFC 1215 [4]. The
+ second version, called SMIv2, is described in STD 58, RFC 2578
+ [5], STD 58, RFC 2579 [6] and STD 58, RFC 2580 [7].
+
+ o Message protocols for transferring management information. The
+ first version of the SNMP message protocol is called SNMPv1 and
+ described in RFC 1157 [8]. A second version of the SNMP message
+ protocol, which is not an Internet standards track protocol, is
+ called SNMPv2c and described in RFC 1901 [9] and RFC 1906 [10].
+ The third version of the message protocol is called SNMPv3 and
+ described in RFC 1906 [10], RFC 2572 [11] and RFC 2574 [12].
+
+ o Protocol operations for accessing management information. The
+ first set of protocol operations and associated PDU formats is
+ described in STD 15, RFC 1157 [8]. A second set of protocol
+ operations and associated PDU formats is described in RFC 1905
+ [13].
+
+ o A set of fundamental applications described in RFC 2573 [14] and
+ the view-based access control mechanism described in RFC 2575
+ [15].
+
+ Managed objects are accessed via a virtual information store, termed
+ the Management Information Base or MIB. Objects in the MIB are
+ defined using the mechanisms defined in the SMI.
+
+ This memo specifies a MIB module that is compliant to the SMIv2. A
+ MIB conforming to the SMIv1 can be produced through the appropriate
+ translations. The resulting translated MIB MUST be semantically
+ equivalent, except where objects or events are omitted because no
+ translation is possible (use of Counter64). Some machine readable
+ information in SMIv2 will be converted into textual descriptions in
+ SMIv1 during the translation process. However, this loss of machine
+ readable information is not considered to change the semantics of the
+ MIB.
+
+
+
+
+
+
+St. Johns Standard [Page 3]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+2. Glossary
+
+ The terms in this document are derived either from normal cable
+ system usage, or from the documents associated with the Data Over
+ Cable Service Interface Specification process.
+
+2.1. CATV
+
+ Originally "Community Antenna Television", now used to refer to any
+ cable or hybrid fiber and cable system used to deliver video signals
+ to a community.
+
+2.2. Channel
+
+ A specific frequency allocation with an RF medium, specified by
+ channel width in Hertz (cycles per second) and by center frequency.
+ Within the US Cable Systems, upstream channels are generally
+ allocated from the 5-42MHz range while down stream channels are
+ generally allocated from the 50-750MHz range depending on the
+ capabilities of the given system. The typical broadcast channel
+ width in the US is 6MHz. Upstream channel widths for DOCSIS vary.
+
+2.3. CM Cable Modem.
+
+ A CM acts as a "slave" station in a DOCSIS compliant cable data
+ system.
+
+2.4. CMTS Cable Modem Termination System.
+
+ A generic term covering a cable bridge or cable router in a head-end.
+ A CMTS acts as the master station in a DOCSIS compliant cable data
+ system. It is the only station that transmits downstream, and it
+ controls the scheduling of upstream transmissions by its associated
+ CMs.
+
+2.5. Codeword
+
+ See [16]. A characteristic of the Foward Error Correction scheme used
+ above the RF media layer.
+
+2.6. Data Packet
+
+ The payload portion of the MAC Packet.
+
+2.7. dBmV
+
+ Decibel relative to one milli-volt. A measure of RF power.
+
+
+
+
+St. Johns Standard [Page 4]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+2.8. DOCSIS
+
+ "Data Over Cable Interface Specification". A term referring to the
+ ITU-T J.112 Annex B standard for cable modem systems [20].
+
+2.9. Downstream
+
+ The direction from the head-end towards the subscriber.
+
+2.10. Head-end
+
+ The origination point in most cable systems of the subscriber video
+ signals.
+
+2.11. MAC Packet
+
+ A DOCSIS PDU.
+
+2.12. MCNS
+
+ "Multimedia Cable Network System". Generally replaced in usage by
+ DOCSIS.
+
+2.13. Mini-slot
+
+ See [16]. In general, an interval of time which is allocated by the
+ CMTS to a given CM for that CM to transmit in an upstream direction.
+
+2.14. QPSK Quadrature Phase Shift Keying.
+
+ A particular modulation scheme on an RF medium. See [19].
+
+2.15. QAM Quadrature Amplitude Modulation.
+
+ A particular modulation scheme on on RF medium. Usually expressed
+ with a number indicating the size of the modulation constellation
+ (e.g. 16 QAM). See [19], or any other book on digital communications
+ over RF for a complete explanation of this.
+
+2.16. RF
+
+ Radio Frequency.
+
+2.17. Symbol-times
+
+ See [16]. A characteristic of the RF modulation scheme.
+
+
+
+
+
+St. Johns Standard [Page 5]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+2.18. Upstream
+
+ The direction from the subscriber towards the head-end.
+
+3. Overview
+
+ This MIB provides a set of objects required for the management of
+ MCNS/DOCSIS compliant Cable Modem (CM) and Cable Modem Termination
+ System (CMTS) RF interfaces. The specification is derived in part
+ from the parameters and protocols described in DOCSIS Radio Frequency
+ Interface Specification [16].
+
+3.1. Structure of the MIB
+
+ This MIB is structured as three groups:
+
+ o Management information pertinent to both Cable Modems (CM) and
+ Cable Modem Termination Systems (CMTS) (docsIfBaseObjects).
+
+ o Management information pertinent to Cable Modems only
+ (docsIfCmObjects).
+
+ o Management information pertinent to Cable Modem Termination
+ Systems only (docsIfCmtsObjects).
+
+ Tables within each of these groups group objects functionally - e.g.
+ Quality of Service, Channel characteristics, MAC layer management,
+ etc. Rows created automatically (e.g. by the device according to the
+ hardware configuration) may and generally will have a mixture of
+ configuration and status objects within them. Rows that are meant to
+ be created by the management station are generally restricted to
+ configuration (read-create) objects.
+
+3.1.1. docsIfBaseObjects
+
+ docsIfDownstreamChannelTable - This table describes the active
+ downstream channels for a CMTS and the received downstream channel
+ for a CM.
+
+ docsIfUpstreamChannelTable - This table describes the active upstream
+ channels for a a CMTS and the current upstream transmission channel
+ for a CM.
+
+ docsIfQosProfileTable - This table describes the valid Quality of
+ Service service profiles for the cable data system.
+
+ docsIfSignalQualityTable - This table is used to monitor RF signal
+ quality characteristics of received signals.
+
+
+
+St. Johns Standard [Page 6]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+3.1.2. docsIfCmObjects
+
+ docsIfCmMacTable - This table is used to monitor the DOCSIS MAC
+ interface and can be considered an extension to the ifEntry.
+
+ docsIfCmServiceTable - This table describes the upstream service
+ queues available at this CM. There is a comparable table at the
+ CMTS, docsIfCmtsServiceEntry, which describes the service queues from
+ the point of view of the CMTS.
+
+3.1.3. docsIfCmtsObjects
+
+ docsIfCmtsStatusTable - This table provides a set of aggregated
+ counters which roll-up values and events that occur on the underlying
+ sub-interfaces.
+
+ docsIfCmtsCmStatusTable - This table is used to hold information
+ about known (e.g. registered) cable modems on the system serviced by
+ this CMTS.
+
+ docsIfCmtsServiceEntry - This table provides access to the
+ information related to upstream service queues.
+
+ docsIfCmtsModulationTable - This table allows control over the
+ modulation profiles for RF channels associated with this CMTS.
+
+ docsIfCmtsMacToCmTable - This table allows fast access into the
+ docsIfCmtsCmTable via a MAC address (of the CM) interface.
+
+3.2. Relationship to the Interfaces MIB
+
+ This section clarifies the relationship of this MIB to the Interfaces
+ MIB [17]. Several areas of correlation are addressed in the
+ following subsections. The implementor is referred to the Interfaces
+ MIB document in order to understand the general intent of these
+ areas.
+
+3.2.1. Layering Model
+
+ An instance of ifEntry exists for each RF Downstream interface, for
+ each RF Upstream interface, and for each RF MAC layer. The
+ ifStackTable [17] MUST be implemented to identify relationships among
+ sub-interfaces.
+
+
+
+
+
+
+
+
+St. Johns Standard [Page 7]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ The following example illustrates a MAC interface with one downstream
+ and two upstream channels.
+
+ | <== to network layer
+ +-------------+--------------+
+ | RF MAC |
+ +----+---------+-----------+-+
+ | | |
+ +---------+---+ +---+-------+ +-+---------+
+ | Downstream1 | | Upstream1 | | Upstream2 |
+ +-------------+ +-----------+ +-----------+
+
+ As can be seen from this example, the RF MAC interface is layered on
+ top of the downstream and upstream interfaces.
+
+ In this example, the assignment of index values could be as follows:
+
+ ifIndex ifType Description
+
+ 1 docsCableMaclayer(127) CATV MAC Layer
+ 2 docsCableDownstream(128) CATV Downstream interface
+ 3 docsCableUpstream(129) CATV Upstream interface
+ 4 docsCableUpstream(129) CATV Upstream interface
+
+ The corresponding ifStack entries would then be:
+
+ | IfStackHigherLayer | ifStackLowerLayer |
+ | 0 | 1 |
+ | 1 | 2 |
+ | 1 | 3 |
+ | 1 | 4 |
+ | 2 | 0 |
+ | 3 | 0 |
+ | 4 | 0 |
+
+ The same interface model can also be used in Telephony or Telco
+ Return systems. A pure Telco Return system (Cable Modem as well as
+ Cable Modem Termination System) would not have upstream, but only
+ downstream cable channels. Systems supporting both Telco Return and
+ cable upstream channels can use the above model without modification.
+
+ Telco Return Upstream channel(s) are handled by the appropriate MIBs,
+ such as PPP or Modem MIBs.
+
+3.2.2. Virtual Circuits
+
+ This medium does not support virtual circuits and this area is not
+ applicable to this MIB.
+
+
+
+St. Johns Standard [Page 8]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+3.2.3. ifTestTable
+
+ The ifTestTable is not supported by this MIB.
+
+3.2.4. ifRcvAddressTable
+
+ The ifRcvAddressTable is not supported by this MIB.
+
+3.2.5. ifEntry
+
+ This section documents only the differences from the requirements
+ specified in the Interfaces MIB. See that MIB for columns omitted
+ from the descriptions below.
+
+3.2.5.1. ifEntry for Downstream interfaces
+
+ The ifEntry for Downstream interfaces supports the
+ ifGeneralInformationGroup and the ifPacketGroup of the Interfaces
+ MIB. This is an output only interface at the CMTS and all input
+ status counters - ifIn* - will return zero. This is an input only
+ interface at the CM and all output status counters - ifOut* - will
+ return zero.
+
+3.2.5.1.1. ifEntry for Downstream interfaces in Cable Modem Termination
+ Systems
+
+ ifTable Comments
+ ============== ===========================================
+ ifIndex Each RF Cable Downstream interface is represented
+ by an ifEntry.
+
+ ifType The IANA value of docsCableDownstream(128).
+
+ ifSpeed Return the speed of this downstream channel.
+ The returned value the raw bandwidth in bits/s
+ of this interface. This is the symbol rate
+ multiplied with the number of bits per symbol.
+
+ ifPhysAddress Return an empty string.
+
+ ifAdminStatus The administrative status of this interface.
+
+ ifOperStatus The current operational status of this interface.
+
+ ifMtu The size of the largest frame which can be
+ sent on this interface, specified in octets.
+ The value includes the length of the MAC header.
+
+
+
+
+St. Johns Standard [Page 9]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ ifInOctets Return zero.
+
+ ifInUcastPkts Return zero.
+
+ ifInMulticastPkts Return zero.
+
+ ifInBroadcastPkts Return zero.
+
+ ifInDiscards Return zero.
+
+ ifInErrors Return zero.
+
+ ifInUnknownProtos Return zero.
+
+ ifOutOctets The total number of octets transmitted on this
+ interface. This includes MAC packets as well as
+ data packets, and includes the length of the MAC
+ header.
+
+ ifOutUcastPkts The number of Unicast packets transmitted on this
+ interface. This includes MAC packets as well as
+ data packets.
+
+ ifOutMulticastPkts
+ Return the number of Multicast packets transmitted
+ on this interface.
+ This includes MAC packets as well as data packets.
+
+ ifOutBroadcastPkts
+ Return the number of broadcast packets transmitted
+ on this interface.
+ This includes MAC packets as well as data packets.
+
+ ifOutDiscards The total number of outbound packets which
+ were discarded. Possible reasons are:
+ buffer shortage.
+
+ ifOutErrors The number of packets which could not be
+ transmitted due to errors.
+
+ ifPromiscuousMode Return false.
+
+
+
+
+
+
+
+
+
+
+St. Johns Standard [Page 10]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+3.2.5.1.2. ifEntry for Downstream interfaces in Cable Modems
+
+ ifTable Comments
+ ============== ===========================================
+ ifIndex Each RF Cable Downstream interface is represented
+ by an ifEntry.
+
+ ifType The IANA value of docsCableDownstream(128).
+
+ ifSpeed Return the speed of this downstream channel.
+ The returned value the raw bandwidth in bits/s
+ of this interface. This is the symbol rate
+ multiplied with the number of bits per symbol.
+
+ ifPhysAddress Return an empty string.
+
+ ifAdminStatus The administrative status of this interface.
+
+ ifOperStatus The current operational status of this interface.
+
+ ifMtu The size of the largest frame which can be
+ received from this interface, specified in octets.
+ The value includes the length of the MAC header.
+
+ ifInOctets The total number of octets received on this
+ interface. This includes data packets as well as
+ MAC layer packets, and includes the length of the
+ MAC header.
+
+ ifInUcastPkts The number of Unicast packets received on this
+ interface. This includes data packets as well as
+ MAC layer packets.
+
+ ifInMulticastPkts Return the number of Multicast packets received
+ on this interface. This includes data packets as
+ well as MAC layer packets.
+
+ ifInBroadcastPkts Return the number of Broadcast packets received
+ on this interface. This includes data packets
+ as well as MAC layer packets.
+
+ ifInDiscards The total number of received packets which have
+ been discarded.
+ The possible reasons are: buffer shortage.
+
+ ifInErrors The number of inbound packets that contained
+ errors preventing them from being deliverable
+ to higher layers.
+
+
+
+St. Johns Standard [Page 11]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ Possible reasons are: MAC FCS error.
+
+ ifInUnknownProtos The number of frames with an unknown packet type.
+ These are MAC frames with an unknown packet type.
+
+ ifOutOctets Return zero.
+
+ ifOutUcastPkts Return zero.
+
+ ifOutMulticastPkts
+ Return zero.
+
+ ifOutBroadcastPkts
+ Return zero.
+
+ ifOutDiscards Return zero.
+
+ ifOutErrors Return zero.
+
+ ifPromiscuousMode Refer to the Interfaces MIB.
+
+3.2.5.2. ifEntry for Upstream interfaces
+
+ The ifEntry for Upstream interfaces supports the
+ ifGeneralInformationGroup and the ifPacketGroup of the Interfaces
+ MIB. This is an input only interface at the CMTS and all output
+ status counters - ifOut* - will return zero. This is an output only
+ interface at the CM and all input status counters - ifIn* - will
+ return zero.
+
+3.2.5.2.1. ifEntry for Upstream interfaces in Cable Modem Termination
+ Systems
+
+ ifTable Comments
+ ============== ===========================================
+ ifIndex Each RF Cable Upstream interface is represented
+ by an ifEntry.
+
+ ifType The IANA value of docsCableUpstream(129).
+
+ ifSpeed Return the speed of this upstream channel.
+ The returned value is the raw bandwidth
+ in bits/s of this interface, regarding the
+ highest speed modulation profile that is
+ defined. This is the symbol rate multiplied
+ with the number of bits per symbol for this
+ modulation profile.
+
+
+
+
+St. Johns Standard [Page 12]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ ifPhysAddress Return an empty string.
+
+ ifAdminStatus The administrative status of this interface.
+
+ ifOperStatus The current operational status of this interface.
+
+ ifMtu The size of the largest frame which can be
+ received on this interface, specified in octets.
+ The value includes the length of the MAC header.
+
+ ifInOctets The total number of octets received on this
+ interface. This includes data packets as well as
+ MAC layer packets, and includes the length of the
+ MAC header.
+
+ ifInUcastPkts The number of Unicast packets received on this
+ interface. This includes data packets as well as
+ MAC layer packets.
+
+ ifInMulticastPkts Return the number of Multicast packets received
+ on this interface. This includes data packets as
+ well as MAC layer packets.
+
+ ifInBroadcastPkts Return the number of Broadcast packets received
+ on this interface. This includes data packets
+ as well as MAC layer packets.
+
+ ifInDiscards The total number of received packets which have
+ been discarded.
+ The possible reasons are: buffer shortage.
+
+ ifInErrors The number of inbound packets that contained
+ errors preventing them from being deliverable
+ to higher layers.
+ Possible reasons are: MAC FCS error.
+
+ ifInUnknownProtos The number of frames with an unknown packet type.
+ This are MAC frames with an unknown packet type.
+
+ ifOutOctets Return zero.
+
+ ifOutUcastPkts Return zero.
+
+ ifOutMulticastPkts
+ Return zero.
+
+ ifOutBroadcastPkts
+ Return zero.
+
+
+
+St. Johns Standard [Page 13]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ ifOutDiscards Return zero.
+
+ ifOutErrors Return zero.
+
+3.2.5.2.2. ifEntry for Upstream interfaces in Cable Modems
+
+ ifTable Comments
+ ============== ===========================================
+ ifIndex Each RF Cable Upstream interface is represented
+ by an ifEntry.
+
+ ifType The IANA value of docsCableUpstream(129).
+
+ ifSpeed Return the speed of this upstream channel.
+ The returned value is the raw bandwidth
+ in bits/s of this interface, regarding the
+ highest speed modulation profile that is
+ defined. This is the symbol rate multiplied
+ with the number of bits per symbol for this
+ modulation profile.
+
+ ifPhysAddress Return an empty string.
+
+ ifAdminStatus The administrative status of this interface.
+
+ ifOperStatus The current operational status of this interface.
+
+ ifMtu The size of the largest frame which can be
+ transmitted on this interface, specified in octets.
+ The value includes the length of the MAC header.
+
+ ifInOctets Return zero.
+
+ ifInUcastPkts Return zero.
+
+ ifInMulticastPkts Return zero.
+
+ ifInBroadcastPkts Return zero.
+
+ ifInDiscards Return zero.
+
+ ifInErrors Return zero.
+
+ ifInUnknownProtos Return zero.
+
+
+
+
+
+
+
+St. Johns Standard [Page 14]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ ifOutOctets The total number of octets transmitted on this
+ interface. This includes MAC packets as well as
+ data packets, and includes the length of the MAC
+ header.
+
+ ifOutUcastPkts The number of Unicast packets transmitted on this
+ interface. This includes MAC packets as well as
+ data packets.
+
+ ifOutMulticastPkts
+ Return the number of Multicast packets transmitted
+ on this interface.
+ This includes MAC packets as well as data packets.
+
+ ifOutBroadcastPkts
+ Return the number of broadcast packets transmitted
+ on this interface.
+ This includes MAC packets as well as data packets.
+
+ ifOutDiscards The total number of outbound packets which
+ were discarded. Possible reasons are:
+ buffer shortage.
+
+ ifOutErrors The number of packets which could not be
+ transmitted due to errors.
+
+ ifPromiscuousMode Return false.
+
+3.2.5.3. ifEntry for the MAC Layer
+
+ The ifEntry for the MAC Layer supports the ifGeneralInformationGroup
+ and the ifPacketGroup of the Interfaces MIB. This interface provides
+ an aggregate view of status for the lower level Downstream and
+ Upstream interfaces.
+
+ ifTable Comments
+ ============== ===========================================
+ ifIndex Each RF Cable MAC layer entity is represented
+ by an ifEntry.
+
+ ifType The IANA value of docsCableMaclayer(127).
+
+ ifSpeed Return zero.
+
+ ifPhysAddress Return the physical address of this interface.
+
+ ifAdminStatus The administrative status of this interface.
+
+
+
+
+St. Johns Standard [Page 15]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ ifOperStatus The current operational status of the MAC
+ layer interface.
+
+ ifHighSpeed Return zero.
+
+ ifMtu Return 1500.
+
+ ifInOctets The total number of data octets received on this
+ interface, targeted for upper protocol layers.
+
+ ifInUcastPkts The number of Unicast packets received on this
+ interface, targeted for upper protocol layers.
+
+ ifInMulticastPkts Return the number of Multicast packets received
+ on this interface, targeted for upper protocol
+ layers.
+
+ ifInBroadcastPkts Return the number of Broadcast packets received
+ on this interface, targeted for upper protocol
+ layers.
+
+ ifInDiscards The total number of received packets which have
+ been discarded.
+ The possible reasons are: buffer shortage.
+
+ ifInErrors The number of inbound packets that contained
+ errors preventing them from being deliverable
+ to higher layers.
+ Possible reasons are: data packet FCS error,
+ invalid MAC header.
+
+ ifInUnknownProtos The number of frames with an unknown packet type.
+ This is the number of data packets targeted for
+ upper protocol layers with an unknown packet type.
+
+ ifOutOctets The total number of octets, received from upper
+ protocol layers and transmitted on this interface.
+
+ ifOutUcastPkts The number of Unicast packets, received from upper
+ protocol layers and transmitted on this interface.
+
+ ifOutMulticastPkts
+ Return the number of Multicast packets received
+ from upper protocol layers and transmitted on this
+ interface.
+
+
+
+
+
+
+St. Johns Standard [Page 16]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ ifOutBroadcastPkts
+ Return the number of broadcast packets received
+ from upper protocol layers and transmitted on this
+ interface.
+
+ ifOutDiscards The total number of outbound packets which
+ were discarded. Possible reasons are:
+ buffer shortage.
+
+ ifOutErrors The number of packets which could not be
+ transmitted due to errors.
+
+ ifPromiscuousMode Refer to the Interfaces MIB.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+St. Johns Standard [Page 17]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+4. Definitions
+
+DOCS-IF-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ -- do not import BITS,
+ Unsigned32,
+ Integer32,
+ Counter32,
+ TimeTicks,
+ IpAddress,
+ transmission
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION,
+ MacAddress,
+ RowStatus,
+ TruthValue,
+ TimeInterval,
+ TimeStamp
+ FROM SNMPv2-TC
+ OBJECT-GROUP,
+
+ MODULE-COMPLIANCE
+ FROM SNMPv2-CONF
+ ifIndex, InterfaceIndexOrZero
+ FROM IF-MIB;
+
+docsIfMib MODULE-IDENTITY
+ LAST-UPDATED "9908190000Z" -- August 19, 1999
+ ORGANIZATION "IETF IPCDN Working Group"
+ CONTACT-INFO
+ " Michael StJohns
+ Postal: @Home Network
+ 425 Broadway
+ Redwood City, CA
+ U.S.A.
+ Phone: +1 650 569 5368
+ E-mail: stjohns@corp.home.net"
+ DESCRIPTION
+ "This is the MIB Module for MCNS/DOCSIS compliant Radio
+ Frequency (RF) interfaces in Cable Modems (CM) and
+ Cable Modem Termination Systems (CMTS)."
+ REVISION "9908190000Z"
+ DESCRIPTION
+ "Initial Version, published as RFC 2670.
+ Modified by Mike StJohns to fix problems identified by
+
+
+
+St. Johns Standard [Page 18]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ the first pass of the MIB doctor. Of special note,
+ docsIfRangingResp and docsIfCmtsInsertionInterval were
+ obsoleted and replaced by other objects with the same
+ functionality, but more appropriate SYNTAX."
+ ::= { transmission 127 }
+
+-- Textual Conventions
+
+TenthdBmV ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-1"
+ STATUS current
+ DESCRIPTION
+ "This data type represents power levels that are normally
+ expressed in dBmV. Units are in tenths of a dBmV;
+ for example, 5.1 dBmV will be represented as 51."
+ SYNTAX Integer32
+
+TenthdB ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-1"
+ STATUS current
+ DESCRIPTION
+ "This data type represents power levels that are normally
+ expressed in dB. Units are in tenths of a dB;
+ for example, 5.1 dB will be represented as 51."
+ SYNTAX Integer32
+
+docsIfMibObjects OBJECT IDENTIFIER ::= { docsIfMib 1 }
+docsIfBaseObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 1 }
+docsIfCmObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 2 }
+docsIfCmtsObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 3 }
+
+--
+-- BASE GROUP
+--
+
+--
+-- The following table is implemented on both the Cable Modem (CM)
+-- and the Cable Modem Termination System (CMTS).
+--
+
+docsIfDownstreamChannelTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfDownstreamChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the attributes of downstream
+ channels (frequency bands)."
+ REFERENCE
+
+
+
+St. Johns Standard [Page 19]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ "DOCSIS Radio Frequency Interface Specification,
+ Table 4-12 and Table 4-13."
+ ::= { docsIfBaseObjects 1 }
+
+docsIfDownstreamChannelEntry OBJECT-TYPE
+ SYNTAX DocsIfDownstreamChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry provides a list of attributes for a single
+ Downstream channel.
+ An entry in this table exists for each ifEntry with an
+ ifType of docsCableDownstream(128)."
+ INDEX { ifIndex }
+ ::= { docsIfDownstreamChannelTable 1 }
+
+DocsIfDownstreamChannelEntry ::= SEQUENCE {
+ docsIfDownChannelId Integer32,
+ docsIfDownChannelFrequency Integer32,
+ docsIfDownChannelWidth Integer32,
+ docsIfDownChannelModulation INTEGER,
+ docsIfDownChannelInterleave INTEGER,
+ docsIfDownChannelPower TenthdBmV
+ }
+
+docsIfDownChannelId OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Cable Modem Termination System (CMTS) identification
+ of the downstream channel within this particular MAC
+ interface. If the interface is down, the object returns
+ the most current value. If the downstream channel ID is
+ unknown, this object returns a value of 0."
+ ::= { docsIfDownstreamChannelEntry 1 }
+
+docsIfDownChannelFrequency OBJECT-TYPE
+ SYNTAX Integer32 (0..1000000000)
+ UNITS "hertz"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The center of the downstream frequency associated with
+ this channel. This object will return the current tuner
+ frequency. If a CMTS provides IF output, this object
+ will return 0, unless this CMTS is in control of the
+ final downstream RF frequency. See the associated
+
+
+
+St. Johns Standard [Page 20]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ compliance object for a description of valid frequencies
+ that may be written to this object."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 4.3.3."
+ ::= { docsIfDownstreamChannelEntry 2 }
+
+docsIfDownChannelWidth OBJECT-TYPE
+ SYNTAX Integer32 (0..16000000)
+ UNITS "hertz"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The bandwidth of this downstream channel. Most
+ implementations are expected to support a channel width
+ of 6 MHz (North America) and/or 8 MHz (Europe). See the
+ associated compliance object for a description of the
+ valid channel widths for this object."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Table 4-12 and Table 4-13."
+ ::= { docsIfDownstreamChannelEntry 3 }
+
+docsIfDownChannelModulation OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ other(2),
+ qam64(3),
+ qam256(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The modulation type associated with this downstream
+ channel. If the interface is down, this object either
+ returns the configured value (CMTS), the most current
+ value (CM), or the value of unknown(1). See the
+ associated conformance object for write conditions and
+ limitations. See the reference for specifics on the
+ modulation profiles implied by qam64 and qam256."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 3.6.2."
+ ::= { docsIfDownstreamChannelEntry 4 }
+
+docsIfDownChannelInterleave OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+
+
+
+St. Johns Standard [Page 21]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ other(2),
+ taps8Increment16(3),
+ taps16Increment8(4),
+ taps32Increment4(5),
+ taps64Increment2(6),
+ taps128Increment1(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Forward Error Correction (FEC) interleaving used
+ for this downstream channel.
+ Values are defined as follows:
+ taps8Increment16(3): protection 5.9/4.1 usec,
+ latency .22/.15 msec
+ taps16Increment8(4): protection 12/8.2 usec,
+ latency .48/.33 msec
+ taps32Increment4(5): protection 24/16 usec,
+ latency .98/.68 msec
+ taps64Increment2(6): protection 47/33 usec,
+ latency 2/1.4 msec
+ taps128Increment1(7): protection 95/66 usec,
+ latency 4/2.8 msec
+ If the interface is down, this object either returns
+ the configured value (CMTS), the most current value (CM),
+ or the value of unknown(1).
+ The value of other(2) is returned if the interleave
+ is known but not defined in the above list.
+ See the associated conformance object for write
+ conditions and limitations. See the reference for the FEC
+ configuration described by the setting of this object."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 4.3.2."
+ ::= { docsIfDownstreamChannelEntry 5 }
+
+docsIfDownChannelPower OBJECT-TYPE
+ SYNTAX TenthdBmV
+ UNITS "dBmV"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "At the CMTS, the operational transmit power. At the CM,
+ the received power level. May be set to zero at the CM
+ if power level measurement is not supported.
+ If the interface is down, this object either returns
+ the configured value (CMTS), the most current value (CM)
+ or the value of 0. See the associated conformance object
+
+
+
+St. Johns Standard [Page 22]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ for write conditions and limitations. See the reference
+ for recommended and required power levels."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Table 4-12 and Table 4-13."
+ ::= { docsIfDownstreamChannelEntry 6 }
+
+--
+-- The following table is implemented on both the CM and the CMTS.
+-- For the CM, only attached channels appear in the table. For the
+-- CM, this table is read only as well.
+--
+
+docsIfUpstreamChannelTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfUpstreamChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes the attributes of attached upstream
+ channels (frequency bands)."
+ ::= { docsIfBaseObjects 2 }
+
+docsIfUpstreamChannelEntry OBJECT-TYPE
+ SYNTAX DocsIfUpstreamChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "List of attributes for a single upstream channel.
+ An entry in this table exists for each ifEntry with an
+ ifType of docsCableUpstream(129)."
+ INDEX { ifIndex }
+ ::= { docsIfUpstreamChannelTable 1 }
+
+DocsIfUpstreamChannelEntry ::= SEQUENCE {
+ docsIfUpChannelId Integer32,
+ docsIfUpChannelFrequency Integer32,
+ docsIfUpChannelWidth Integer32,
+ docsIfUpChannelModulationProfile Unsigned32,
+ docsIfUpChannelSlotSize Unsigned32,
+ docsIfUpChannelTxTimingOffset Unsigned32,
+ docsIfUpChannelRangingBackoffStart Integer32,
+ docsIfUpChannelRangingBackoffEnd Integer32,
+ docsIfUpChannelTxBackoffStart Integer32,
+ docsIfUpChannelTxBackoffEnd Integer32
+ }
+
+docsIfUpChannelId OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+
+
+
+St. Johns Standard [Page 23]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CMTS identification of the upstream channel."
+ ::= { docsIfUpstreamChannelEntry 1 }
+
+docsIfUpChannelFrequency OBJECT-TYPE
+ SYNTAX Integer32 (0..1000000000)
+ UNITS "hertz"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The center of the frequency band associated with this
+ upstream channel. This object returns 0 if the frequency
+ is undefined or unknown. Minimum permitted upstream
+ frequency is 5,000,000 Hz for current technology. See
+ the associated conformance object for write conditions
+ and limitations."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Table 2-2."
+ ::= { docsIfUpstreamChannelEntry 2 }
+
+docsIfUpChannelWidth OBJECT-TYPE
+ SYNTAX Integer32 (0..20000000)
+ UNITS "hertz"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The bandwidth of this upstream channel. This object
+ returns 0 if the channel width is undefined or unknown.
+ Minimum permitted channel width is 200,000 Hz currently.
+ See the associated conformance object for write conditions
+ and limitations."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Table 4-3."
+ ::= { docsIfUpstreamChannelEntry 3 }
+
+docsIfUpChannelModulationProfile OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An entry identical to the docsIfModIndex in the
+ docsIfCmtsModulationTable that describes this channel.
+ This channel is further instantiated there by a grouping
+ of interval usage codes which together fully describe the
+
+
+
+St. Johns Standard [Page 24]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ channel modulation. This object returns 0 if the
+ docsIfCmtsModulationTable entry does not exist or
+ docsIfCmtsModulationTable is empty. See
+ the associated conformance object for write conditions
+ and limitations."
+ ::= { docsIfUpstreamChannelEntry 4 }
+
+docsIfUpChannelSlotSize OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The number of 6.25 microsecond ticks in each upstream mini-
+ slot. Returns zero if the value is undefined or unknown.
+ See the associated conformance object for write
+ conditions and limitations."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 6.1.2.4."
+ ::= { docsIfUpstreamChannelEntry 5 }
+
+docsIfUpChannelTxTimingOffset OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A measure of the current round trip time at the CM, or the
+ maximum round trip time seen by the CMTS. Used for timing
+ of CM upstream transmissions to ensure synchronized
+ arrivals at the CMTS. Units are in terms of
+ (6.25 microseconds/64)."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 6.5."
+ ::= { docsIfUpstreamChannelEntry 6 }
+
+docsIfUpChannelRangingBackoffStart OBJECT-TYPE
+ SYNTAX Integer32 (0..16)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The initial random backoff window to use when retrying
+ Ranging Requests. Expressed as a power of 2. A value of 16
+ at the CMTS indicates that a proprietary adaptive retry
+ mechanism is to be used. See the associated conformance
+ object for write conditions and limitations."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+
+
+
+St. Johns Standard [Page 25]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ Section 6.4.4."
+ ::= { docsIfUpstreamChannelEntry 7 }
+
+docsIfUpChannelRangingBackoffEnd OBJECT-TYPE
+ SYNTAX Integer32 (0..16)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The final random backoff window to use when retrying
+ Ranging Requests. Expressed as a power of 2. A value of 16
+ at the CMTS indicates that a proprietary adaptive retry
+ mechanism is to be used. See the associated conformance
+ object for write conditions and limitations."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 6.4.4."
+ ::= { docsIfUpstreamChannelEntry 8 }
+
+docsIfUpChannelTxBackoffStart OBJECT-TYPE
+ SYNTAX Integer32 (0..16)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The initial random backoff window to use when retrying
+ transmissions. Expressed as a power of 2. A value of 16
+ at the CMTS indicates that a proprietary adaptive retry
+ mechanism is to be used. See the associated conformance
+ object for write conditions and limitations."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 6.4.4."
+ ::= { docsIfUpstreamChannelEntry 9 }
+
+docsIfUpChannelTxBackoffEnd OBJECT-TYPE
+ SYNTAX Integer32 (0..16)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The final random backoff window to use when retrying
+ transmissions. Expressed as a power of 2. A value of 16
+ at the CMTS indicates that a proprietary adaptive retry
+ mechanism is to be used. See the associated conformance
+ object for write conditions and limitations."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 6.4.4."
+ ::= { docsIfUpstreamChannelEntry 10 }
+
+
+
+
+St. Johns Standard [Page 26]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+-- The following table describes the attributes of each class of
+-- service. The entries in this table are referenced from the
+-- docsIfServiceEntries. They exist as a separate table in order to
+-- reduce redundant information in docsIfServiceTable.
+--
+-- This table is implemented at both the CM and the CMTS.
+-- The CM need only maintain entries for the classes of service
+-- referenced by its docsIfServiceTable.
+--
+
+docsIfQosProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfQosProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes the attributes for each class of service."
+ ::= { docsIfBaseObjects 3 }
+
+docsIfQosProfileEntry OBJECT-TYPE
+ SYNTAX DocsIfQosProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes the attributes for a single class of service.
+
+ If implemented as read-create in the Cable Modem
+ Termination System, creation of entries in this table is
+ controlled by the value of docsIfCmtsQosProfilePermissions.
+
+ If implemented as read-only, entries are created based
+ on information in REG-REQ MAC messages received from
+ Cable Modems (Cable Modem Termination System
+ implementation), or based on information extracted from
+ the TFTP option file (Cable Modem implementation).
+ In the Cable Modem Termination system, read-only entries
+ are removed if no longer referenced by
+ docsIfCmtsServiceTable.
+
+ An entry in this table must not be removed while it is
+ referenced by an entry in docsIfCmServiceTable (Cable Modem)
+ or docsIfCmtsServiceTable (Cable Modem Termination System).
+
+ An entry in this table should not be changeable while
+ it is referenced by an entry in docsIfCmtsServiceTable.
+
+ If this table is created automatically, there should only
+ be a single entry for each Class of Service. Multiple
+ entries with the same Class of Service parameters are not
+
+
+
+St. Johns Standard [Page 27]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ recommended."
+ INDEX { docsIfQosProfIndex }
+ ::= { docsIfQosProfileTable 1 }
+
+DocsIfQosProfileEntry ::= SEQUENCE {
+ docsIfQosProfIndex Integer32,
+ docsIfQosProfPriority Integer32,
+ docsIfQosProfMaxUpBandwidth Integer32,
+ docsIfQosProfGuarUpBandwidth Integer32,
+ docsIfQosProfMaxDownBandwidth Integer32,
+ docsIfQosProfMaxTxBurst Integer32,
+ docsIfQosProfBaselinePrivacy TruthValue,
+ docsIfQosProfStatus RowStatus
+ }
+
+docsIfQosProfIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..16383)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The index value which uniquely identifies an entry
+ in the docsIfQosProfileTable."
+ ::= { docsIfQosProfileEntry 1 }
+
+docsIfQosProfPriority OBJECT-TYPE
+ SYNTAX Integer32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A relative priority assigned to this service when
+ allocating bandwidth. Zero indicates lowest priority;
+ and seven indicates highest priority.
+ Interpretation of priority is device-specific.
+ MUST NOT be changed while this row is active."
+ DEFVAL { 0 }
+ ::= { docsIfQosProfileEntry 2 }
+
+docsIfQosProfMaxUpBandwidth OBJECT-TYPE
+ SYNTAX Integer32 (0..100000000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum upstream bandwidth, in bits per second,
+ allowed for a service with this service class.
+ Zero if there is no restriction of upstream bandwidth.
+ MUST NOT be changed while this row is active."
+ DEFVAL { 0 }
+ ::= { docsIfQosProfileEntry 3 }
+
+
+
+St. Johns Standard [Page 28]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+docsIfQosProfGuarUpBandwidth OBJECT-TYPE
+ SYNTAX Integer32 (0..100000000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Minimum guaranteed upstream bandwidth, in bits per second,
+ allowed for a service with this service class.
+ MUST NOT be changed while this row is active."
+ DEFVAL { 0 }
+ ::= { docsIfQosProfileEntry 4 }
+
+docsIfQosProfMaxDownBandwidth OBJECT-TYPE
+ SYNTAX Integer32 (0..100000000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum downstream bandwidth, in bits per second,
+ allowed for a service with this service class.
+ Zero if there is no restriction of downstream bandwidth.
+ MUST NOT be changed while this row is active."
+ DEFVAL { 0 }
+ ::= { docsIfQosProfileEntry 5 }
+
+docsIfQosProfMaxTxBurst OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of mini-slots that may be requested
+ for a single upstream transmission.
+ A value of zero means there is no limit.
+ MUST NOT be changed while this row is active."
+ DEFVAL { 0 }
+ ::= { docsIfQosProfileEntry 6 }
+
+docsIfQosProfBaselinePrivacy OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Baseline Privacy is enabled for this
+ service class.
+ MUST NOT be changed while this row is active."
+ DEFVAL { false }
+ ::= { docsIfQosProfileEntry 7 }
+
+docsIfQosProfStatus OBJECT-TYPE
+ SYNTAX RowStatus
+
+
+
+St. Johns Standard [Page 29]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This is object is to used to create or delete rows in
+ this table. This object MUST NOT be changed from active
+ while the row is referenced by the any entry in either
+ docsIfCmServiceTable (on the CM), or the
+ docsIfCmtsServiceTable (on the CMTS)."
+ ::= { docsIfQosProfileEntry 8 }
+
+
+docsIfSignalQualityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfSignalQualityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "At the CM, describes the PHY signal quality of downstream
+ channels. At the CMTS, describes the PHY signal quality of
+ upstream channels. At the CMTS, this table may exclude
+ contention intervals."
+ ::= { docsIfBaseObjects 4 }
+
+docsIfSignalQualityEntry OBJECT-TYPE
+ SYNTAX DocsIfSignalQualityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "At the CM, describes the PHY characteristics of a
+ downstream channel. At the CMTS, describes the PHY signal
+ quality of an upstream channel.
+ An entry in this table exists for each ifEntry with an
+ ifType of docsCableUpstream(129) for Cable Modem Termination
+ Systems and docsCableDownstream(128) for Cable Modems."
+ INDEX { ifIndex }
+ ::= { docsIfSignalQualityTable 1 }
+
+DocsIfSignalQualityEntry ::= SEQUENCE {
+ docsIfSigQIncludesContention TruthValue,
+ docsIfSigQUnerroreds Counter32,
+ docsIfSigQCorrecteds Counter32,
+ docsIfSigQUncorrectables Counter32,
+ docsIfSigQSignalNoise TenthdB,
+ docsIfSigQMicroreflections Integer32,
+ docsIfSigQEqualizationData OCTET STRING
+ }
+
+docsIfSigQIncludesContention OBJECT-TYPE
+ SYNTAX TruthValue
+
+
+
+St. Johns Standard [Page 30]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "true(1) if this CMTS includes contention intervals in
+ the counters in this table. Always false(2) for CMs."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.4.4"
+ ::= { docsIfSignalQualityEntry 1 }
+
+docsIfSigQUnerroreds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Codewords received on this channel without error.
+ This includes all codewords, whether or not they
+ were part of frames destined for this device."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.3 and 4.3.6"
+ ::= { docsIfSignalQualityEntry 2 }
+
+docsIfSigQCorrecteds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Codewords received on this channel with correctable
+ errors. This includes all codewords, whether or not
+ they were part of frames destined for this device."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.3 and 4.3.6"
+ ::= { docsIfSignalQualityEntry 3 }
+
+docsIfSigQUncorrectables OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Codewords received on this channel with uncorrectable
+ errors. This includes all codewords, whether or not
+ they were part of frames destined for this device."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.3 and 4.3.6"
+ ::= { docsIfSignalQualityEntry 4 }
+
+
+
+St. Johns Standard [Page 31]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+docsIfSigQSignalNoise OBJECT-TYPE
+ SYNTAX TenthdB
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Signal/Noise ratio as perceived for this channel.
+ At the CM, describes the Signal/Noise of the downstream
+ channel. At the CMTS, describes the average Signal/Noise
+ of the upstream channel."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Table 2-1 and 2-2"
+ ::= { docsIfSignalQualityEntry 5 }
+
+docsIfSigQMicroreflections OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ UNITS "dBc"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total microreflections including in-channel response
+ as perceived on this interface, measured in dBc below
+ the signal level.
+ This object is not assumed to return an absolutely
+ accurate value, but should give a rough indication
+ of microreflections received on this interface.
+ It is up to the implementor to provide information
+ as accurate as possible."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Table 2-1 and 2-2"
+ ::= { docsIfSignalQualityEntry 6 }
+
+docsIfSigQEqualizationData OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "At the CM, returns the equalization data for the downstream
+ channel. At the CMTS, returns the average equalization
+ data for the upstream channel. Returns an empty string
+ if the value is unknown or if there is no equalization
+ data available or defined."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Figure 6-23."
+ ::= { docsIfSignalQualityEntry 7 }
+
+
+
+St. Johns Standard [Page 32]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+--
+-- CABLE MODEM GROUP
+--
+
+-- #######
+
+--
+-- The CM MAC Table
+--
+
+docsIfCmMacTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfCmMacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes the attributes of each CM MAC interface,
+ extending the information available from ifEntry."
+ ::= { docsIfCmObjects 1 }
+
+docsIfCmMacEntry OBJECT-TYPE
+ SYNTAX DocsIfCmMacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing objects describing attributes of
+ each MAC entry, extending the information in ifEntry.
+ An entry in this table exists for each ifEntry with an
+ ifType of docsCableMaclayer(127)."
+ INDEX { ifIndex }
+ ::= { docsIfCmMacTable 1 }
+
+DocsIfCmMacEntry ::= SEQUENCE {
+ docsIfCmCmtsAddress MacAddress,
+ docsIfCmCapabilities BITS,
+ docsIfCmRangingRespTimeout TimeTicks,
+ docsIfCmRangingTimeout TimeInterval
+ }
+
+docsIfCmCmtsAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the CMTS that is believed to control this MAC
+ domain. At the CM, this will be the source address from
+ SYNC, MAP, and other MAC-layer messages. If the CMTS is
+ unknown, returns 00-00-00-00-00-00."
+ ::= { docsIfCmMacEntry 1 }
+
+
+
+St. Johns Standard [Page 33]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+docsIfCmCapabilities OBJECT-TYPE
+ SYNTAX BITS {
+ atmCells(0),
+ concatenation(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the capabilities of the MAC implementation
+ at this interface. Note that packet transmission is
+ always supported. Therefore, there is no specific bit
+ required to explicitely indicate this capability."
+ ::= { docsIfCmMacEntry 2 }
+
+-- This object has been obsoleted and replaced by
+-- docsIfCmRangingTimeout to correct the typing to TimeInterval. New
+-- implementations of the MIB should use docsIfCmRangingTimeout instead.
+
+docsIfCmRangingRespTimeout OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Waiting time for a Ranging Response packet."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Figure 7-6 and 7-7, timer T3."
+ DEFVAL { 20 }
+ ::= { docsIfCmMacEntry 3 }
+
+docsIfCmRangingTimeout OBJECT-TYPE
+ SYNTAX TimeInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Waiting time for a Ranging Response packet."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Figure 7-6 and 7-7, timer T3."
+ DEFVAL { 20 }
+ ::= { docsIfCmMacEntry 4 }
+
+--
+-- CM status table.
+-- This table is implemented only at the CM.
+--
+
+docsIfCmStatusTable OBJECT-TYPE
+
+
+
+St. Johns Standard [Page 34]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ SYNTAX SEQUENCE OF DocsIfCmStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table maintains a number of status objects
+ and counters for Cable Modems."
+ ::= { docsIfCmObjects 2 }
+
+docsIfCmStatusEntry OBJECT-TYPE
+ SYNTAX DocsIfCmStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of status objects and counters for a single MAC
+ layer instance in a Cable Modem.
+ An entry in this table exists for each ifEntry with an
+ ifType of docsCableMaclayer(127)."
+ INDEX { ifIndex }
+ ::= { docsIfCmStatusTable 1 }
+
+DocsIfCmStatusEntry ::= SEQUENCE {
+ docsIfCmStatusValue INTEGER,
+ docsIfCmStatusCode OCTET STRING,
+ docsIfCmStatusTxPower TenthdBmV,
+ docsIfCmStatusResets Counter32,
+ docsIfCmStatusLostSyncs Counter32,
+ docsIfCmStatusInvalidMaps Counter32,
+ docsIfCmStatusInvalidUcds Counter32,
+-- docsIfCmStatusInvalidRangingResp Counter32,
+ docsIfCmStatusInvalidRangingResponses Counter32,
+-- docsIfCmStatusInvalidRegistrationResp Counter32,
+ docsIfCmStatusInvalidRegistrationResponses Counter32,
+ docsIfCmStatusT1Timeouts Counter32,
+ docsIfCmStatusT2Timeouts Counter32,
+ docsIfCmStatusT3Timeouts Counter32,
+ docsIfCmStatusT4Timeouts Counter32,
+ docsIfCmStatusRangingAborteds Counter32
+ }
+
+docsIfCmStatusValue OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ notReady(2),
+ notSynchronized(3),
+ phySynchronized(4),
+ usParametersAcquired(5),
+ rangingComplete(6),
+ ipComplete(7),
+
+
+
+St. Johns Standard [Page 35]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ todEstablished(8),
+ securityEstablished(9),
+ paramTransferComplete(10),
+ registrationComplete(11),
+ operational(12),
+ accessDenied(13)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Cable Modem connectivity state, as specified
+ in the RF Interface Specification."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Chapter 7.2."
+ ::= { docsIfCmStatusEntry 1 }
+
+docsIfCmStatusCode OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status code for this Cable Modem as defined in the
+ RF Interface Specification. The status code consists
+ of a single character indicating error groups, followed
+ by a two- or three-digit number indicating the status
+ condition."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Cable Modem status codes."
+ ::= { docsIfCmStatusEntry 2 }
+
+docsIfCmStatusTxPower OBJECT-TYPE
+ SYNTAX TenthdBmV
+ UNITS "dBmV"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational transmit power for the attached upstream
+ channel."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.8."
+ ::= { docsIfCmStatusEntry 3 }
+
+docsIfCmStatusResets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+
+
+
+St. Johns Standard [Page 36]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ STATUS current
+ DESCRIPTION
+ "Number of times the CM reset or initialized
+ this interface."
+ ::= { docsIfCmStatusEntry 4 }
+
+docsIfCmStatusLostSyncs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times the CM lost synchronization with
+ the downstream channel."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.5."
+ ::= { docsIfCmStatusEntry 5 }
+
+docsIfCmStatusInvalidMaps OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times the CM received invalid MAP messages."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.3.2.3 and 6.4.2."
+ ::= { docsIfCmStatusEntry 6 }
+
+docsIfCmStatusInvalidUcds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times the CM received invalid UCD messages."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.3.2.2."
+ ::= { docsIfCmStatusEntry 7 }
+
+-- docsIfCmStatusInvalidRangingResp replaced for Counter32
+-- naming requirements
+
+docsIfCmStatusInvalidRangingResponses OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+St. Johns Standard [Page 37]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ "Number of times the CM received invalid ranging response
+ messages."
+ ::= { docsIfCmStatusEntry 8 }
+
+-- docsIfCmStatusInvalidRegistrationResp replaced for
+-- Counter32 naming requirements
+docsIfCmStatusInvalidRegistrationResponses OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times the CM received invalid registration
+ response messages."
+ ::= { docsIfCmStatusEntry 9 }
+
+docsIfCmStatusT1Timeouts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times counter T1 expired in the CM."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Figure 7-3."
+ ::= { docsIfCmStatusEntry 10 }
+
+docsIfCmStatusT2Timeouts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times counter T2 expired in the CM."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Figure 7-6."
+ ::= { docsIfCmStatusEntry 11 }
+
+docsIfCmStatusT3Timeouts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times counter T3 expired in the CM."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Figure 7-6 and 7-7."
+ ::= { docsIfCmStatusEntry 12 }
+
+
+
+
+St. Johns Standard [Page 38]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+docsIfCmStatusT4Timeouts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times counter T4 expired in the CM."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Figure 7-7."
+ ::= { docsIfCmStatusEntry 13 }
+
+docsIfCmStatusRangingAborteds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times the ranging process was aborted
+ by the CMTS."
+ ::= { docsIfCmStatusEntry 14 }
+
+--
+-- The Cable Modem Service Table
+--
+
+docsIfCmServiceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfCmServiceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes the attributes of each upstream service queue
+ on a CM."
+ ::= { docsIfCmObjects 3 }
+
+docsIfCmServiceEntry OBJECT-TYPE
+ SYNTAX DocsIfCmServiceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes the attributes of an upstream bandwidth service
+ queue.
+ An entry in this table exists for each Service ID.
+ The primary index is an ifIndex with an ifType of
+ docsCableMaclayer(127)."
+ INDEX { ifIndex, docsIfCmServiceId }
+ ::= { docsIfCmServiceTable 1 }
+
+DocsIfCmServiceEntry ::= SEQUENCE {
+ docsIfCmServiceId Integer32,
+
+
+
+St. Johns Standard [Page 39]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ docsIfCmServiceQosProfile Integer32,
+ docsIfCmServiceTxSlotsImmed Counter32,
+ docsIfCmServiceTxSlotsDed Counter32,
+ docsIfCmServiceTxRetries Counter32,
+
+-- docsIfCmServiceTxExceeded Counter32,
+ docsIfCmServiceTxExceededs Counter32,
+ docsIfCmServiceRqRetries Counter32,
+-- docsIfCmServiceRqExceeded Counter32
+ docsIfCmServiceRqExceededs Counter32
+ }
+
+docsIfCmServiceId OBJECT-TYPE
+ SYNTAX Integer32 (1..16383)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Identifies a service queue for upstream bandwidth. The
+ attributes of this service queue are shared between the
+ CM and the CMTS. The CMTS allocates upstream bandwidth
+ to this service queue based on requests from the CM and
+ on the class of service associated with this queue."
+ ::= { docsIfCmServiceEntry 1 }
+
+docsIfCmServiceQosProfile OBJECT-TYPE
+ SYNTAX Integer32 (0..16383)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index in docsIfQosProfileTable describing the quality
+ of service attributes associated with this particular
+ service. If no associated entry in docsIfQosProfileTable
+ exists, this object returns a value of zero."
+ ::= { docsIfCmServiceEntry 2 }
+
+docsIfCmServiceTxSlotsImmed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of upstream mini-slots which have been used to
+ transmit data PDUs in immediate (contention) mode. This
+ includes only those PDUs which are presumed to have
+ arrived at the headend (i.e., those which were explicitly
+ acknowledged.) It does not include retransmission attempts
+ or mini-slots used by Requests."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+
+
+
+St. Johns Standard [Page 40]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ Section 6.4."
+ ::= { docsIfCmServiceEntry 3 }
+
+docsIfCmServiceTxSlotsDed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of upstream mini-slots which have been used to
+ transmit data PDUs in dedicated mode (i.e., as a result
+ of a unicast Data Grant)."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.4."
+ ::= { docsIfCmServiceEntry 4 }
+
+docsIfCmServiceTxRetries OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of attempts to transmit data PDUs containing
+ requests for acknowledgment which did not result in
+ acknowledgment."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.4."
+ ::= { docsIfCmServiceEntry 5 }
+
+-- docsIfCmServiceTxExceeded renamed for Counter32 naming requirements
+docsIfCmServiceTxExceededs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of data PDUs transmission failures due to
+ excessive retries without acknowledgment."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.4."
+ ::= { docsIfCmServiceEntry 6 }
+
+docsIfCmServiceRqRetries OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of attempts to transmit bandwidth requests
+
+
+
+St. Johns Standard [Page 41]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ which did not result in acknowledgment."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.4."
+ ::= { docsIfCmServiceEntry 7 }
+
+
+-- docsIfCmServiceRqExceeded renamed for Counter 32 naming
+-- requirements
+docsIfCmServiceRqExceededs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of requests for bandwidth which failed due to
+ excessive retries without acknowledgment."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 6.4."
+ ::= { docsIfCmServiceEntry 8 }
+
+--
+-- CMTS GROUP
+--
+
+--
+-- The CMTS MAC Table
+--
+
+docsIfCmtsMacTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfCmtsMacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes the attributes of each CMTS MAC interface,
+ extending the information available from ifEntry.
+ Mandatory for all CMTS devices."
+ ::= { docsIfCmtsObjects 1 }
+
+docsIfCmtsMacEntry OBJECT-TYPE
+ SYNTAX DocsIfCmtsMacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing objects describing attributes of each
+ MAC entry, extending the information in ifEntry.
+ An entry in this table exists for each ifEntry with an
+ ifType of docsCableMaclayer(127)."
+
+
+
+St. Johns Standard [Page 42]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ INDEX { ifIndex }
+ ::= { docsIfCmtsMacTable 1 }
+
+DocsIfCmtsMacEntry ::= SEQUENCE {
+ docsIfCmtsCapabilities BITS,
+ docsIfCmtsSyncInterval Integer32,
+ docsIfCmtsUcdInterval Integer32,
+ docsIfCmtsMaxServiceIds Integer32,
+ docsIfCmtsInsertionInterval TimeTicks, -- Obsolete
+ docsIfCmtsInvitedRangingAttempts Integer32,
+ docsIfCmtsInsertInterval TimeInterval
+ }
+
+docsIfCmtsCapabilities OBJECT-TYPE
+ SYNTAX BITS {
+ atmCells(0),
+ concatenation(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Identifies the capabilities of the CMTS MAC
+ implementation at this interface. Note that packet
+ transmission is always supported. Therefore, there
+ is no specific bit required to explicitely indicate
+ this capability."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Chapter 6."
+ ::= { docsIfCmtsMacEntry 1 }
+
+docsIfCmtsSyncInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..200)
+ UNITS "Milliseconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The interval between CMTS transmission of successive SYNC
+ messages at this interface."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 6.5 and Appendix B."
+ ::= { docsIfCmtsMacEntry 2 }
+
+docsIfCmtsUcdInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..2000)
+ UNITS "Milliseconds"
+ MAX-ACCESS read-write
+
+
+
+St. Johns Standard [Page 43]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ STATUS current
+ DESCRIPTION
+ "The interval between CMTS transmission of successive
+ Upstream Channel Descriptor messages for each upstream
+ channel at this interface."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 6.5 and Appendix B."
+ ::= { docsIfCmtsMacEntry 3 }
+
+docsIfCmtsMaxServiceIds OBJECT-TYPE
+ SYNTAX Integer32 (1..16383)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of service IDs that may be
+ simultaneously active."
+ ::= { docsIfCmtsMacEntry 4 }
+
+
+-- This object has been obsoleted and replaced by
+-- docsIfCmtsInsertInterval to fix a SYNTAX typing problem. New
+-- implementations of this MIB should use that object instead.
+docsIfCmtsInsertionInterval OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The amount of time to elapse between each broadcast
+ station maintenance grant. Broadcast station maintenance
+ grants are used to allow new cable modems to join the
+ network. Zero indicates that a vendor-specific algorithm
+ is used instead of a fixed time. Maximum amount of time
+ permitted by the specification is 2 seconds."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Appendix B, Ranging Interval."
+ ::= { docsIfCmtsMacEntry 5 }
+
+docsIfCmtsInvitedRangingAttempts OBJECT-TYPE
+ SYNTAX Integer32 (0..1024)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of attempts to make on invitations
+ for ranging requests. A value of zero means the system
+ should attempt to range forever."
+ REFERENCE
+
+
+
+St. Johns Standard [Page 44]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ "DOCSIS Radio Frequency Interface specification,
+ Section 7.2.5 and Appendix B."
+ ::= { docsIfCmtsMacEntry 6 }
+
+docsIfCmtsInsertInterval OBJECT-TYPE
+ SYNTAX TimeInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The amount of time to elapse between each broadcast
+ station maintenance grant. Broadcast station maintenance
+ grants are used to allow new cable modems to join the
+ network. Zero indicates that a vendor-specific algorithm
+ is used instead of a fixed time. Maximum amount of time
+ permitted by the specification is 2 seconds."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Appendix B."
+ ::= { docsIfCmtsMacEntry 7 }
+
+--
+--
+-- CMTS status table.
+--
+
+docsIfCmtsStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfCmtsStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "For the MAC layer, this group maintains a number of
+ status objects and counters."
+ ::= { docsIfCmtsObjects 2 }
+
+docsIfCmtsStatusEntry OBJECT-TYPE
+ SYNTAX DocsIfCmtsStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Status entry for a single MAC layer.
+ An entry in this table exists for each ifEntry with an
+ ifType of docsCableMaclayer(127)."
+ INDEX { ifIndex }
+ ::= { docsIfCmtsStatusTable 1 }
+
+DocsIfCmtsStatusEntry ::= SEQUENCE {
+ docsIfCmtsStatusInvalidRangeReqs Counter32,
+ docsIfCmtsStatusRangingAborteds Counter32,
+
+
+
+St. Johns Standard [Page 45]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ docsIfCmtsStatusInvalidRegReqs Counter32,
+ docsIfCmtsStatusFailedRegReqs Counter32,
+ docsIfCmtsStatusInvalidDataReqs Counter32,
+ docsIfCmtsStatusT5Timeouts Counter32
+ }
+
+docsIfCmtsStatusInvalidRangeReqs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts invalid RNG-REQ messages received on
+ this interface."
+ ::= { docsIfCmtsStatusEntry 1 }
+
+docsIfCmtsStatusRangingAborteds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts ranging attempts that were explicitely
+ aborted by the CMTS."
+ ::= { docsIfCmtsStatusEntry 2 }
+
+docsIfCmtsStatusInvalidRegReqs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts invalid REG-REQ messages received on
+ this interface."
+ ::= { docsIfCmtsStatusEntry 3 }
+
+docsIfCmtsStatusFailedRegReqs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts failed registration attempts, i.e.,
+ authentication failures and class of service failures,
+ on this interface."
+ ::= { docsIfCmtsStatusEntry 4 }
+
+docsIfCmtsStatusInvalidDataReqs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+
+St. Johns Standard [Page 46]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ "This object counts invalid data request messages
+ received on this interface."
+ ::= { docsIfCmtsStatusEntry 5 }
+
+docsIfCmtsStatusT5Timeouts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of times counter T5
+ expired on this interface."
+ ::= { docsIfCmtsStatusEntry 6 }
+
+--
+-- CM status table (within CMTS).
+-- This table is implemented only at the CMTS.
+-- It contains per CM status information available in the CMTS.
+--
+
+docsIfCmtsCmStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfCmtsCmStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of objects in the CMTS, maintained for each
+ Cable Modem connected to this CMTS."
+ ::= { docsIfCmtsObjects 3 }
+
+docsIfCmtsCmStatusEntry OBJECT-TYPE
+ SYNTAX DocsIfCmtsCmStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Status information for a single Cable Modem.
+ An entry in this table exists for each Cable Modem
+ that is connected to the CMTS implementing this table."
+ INDEX { docsIfCmtsCmStatusIndex }
+ ::= { docsIfCmtsCmStatusTable 1 }
+
+DocsIfCmtsCmStatusEntry ::= SEQUENCE {
+ docsIfCmtsCmStatusIndex Integer32,
+ docsIfCmtsCmStatusMacAddress MacAddress,
+ docsIfCmtsCmStatusIpAddress IpAddress,
+ docsIfCmtsCmStatusDownChannelIfIndex InterfaceIndexOrZero,
+ docsIfCmtsCmStatusUpChannelIfIndex InterfaceIndexOrZero,
+ docsIfCmtsCmStatusRxPower TenthdBmV,
+ docsIfCmtsCmStatusTimingOffset Unsigned32,
+ docsIfCmtsCmStatusEqualizationData OCTET STRING,
+
+
+
+St. Johns Standard [Page 47]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ docsIfCmtsCmStatusValue INTEGER,
+ docsIfCmtsCmStatusUnerroreds Counter32,
+ docsIfCmtsCmStatusCorrecteds Counter32,
+ docsIfCmtsCmStatusUncorrectables Counter32,
+ docsIfCmtsCmStatusSignalNoise TenthdB,
+ docsIfCmtsCmStatusMicroreflections Integer32
+ }
+
+docsIfCmtsCmStatusIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Index value to uniquely identify an entry in this table.
+ For an individual Cable Modem, this index value should
+ not change during CMTS uptime."
+ ::= { docsIfCmtsCmStatusEntry 1 }
+
+docsIfCmtsCmStatusMacAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MAC address of this Cable Modem. If the Cable Modem has
+ multiple MAC addresses, this is the MAC address associated
+ with the Cable interface."
+ ::= { docsIfCmtsCmStatusEntry 2 }
+
+docsIfCmtsCmStatusIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP address of this Cable Modem. If the Cable Modem has no
+ IP address assigned, or the IP address is unknown, this
+ object returns a value of 0.0.0.0. If the Cable Modem has
+ multiple IP addresses, this object returns the IP address
+ associated with the Cable interface."
+ ::= { docsIfCmtsCmStatusEntry 3 }
+
+docsIfCmtsCmStatusDownChannelIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IfIndex of the downstream channel this CM is connected
+ to. If the downstream channel is unknown, this object
+ returns a value of zero."
+
+
+
+St. Johns Standard [Page 48]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ ::= { docsIfCmtsCmStatusEntry 4 }
+
+docsIfCmtsCmStatusUpChannelIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IfIndex of the upstream channel this CM is connected
+ to. If the upstream channel is unknown, this object
+ returns a value of zero."
+ ::= { docsIfCmtsCmStatusEntry 5 }
+
+docsIfCmtsCmStatusRxPower OBJECT-TYPE
+ SYNTAX TenthdBmV
+ UNITS "dBmV"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The receive power as percieved for upstream data from
+ this Cable Modem.
+ If the receive power is unknown, this object returns
+ a value of zero."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Table 4-13."
+ ::= { docsIfCmtsCmStatusEntry 6 }
+
+docsIfCmtsCmStatusTimingOffset OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A measure of the current round trip time for this CM.
+ Used for timing of CM upstream transmissions to ensure
+ synchronized arrivals at the CMTS. Units are in terms
+ of (6.25 microseconds/64). Returns zero if the value
+ is unknown."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Section 6.5."
+ ::= { docsIfCmtsCmStatusEntry 7 }
+
+docsIfCmtsCmStatusEqualizationData OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Equalization data for this CM. Returns an empty string
+
+
+
+St. Johns Standard [Page 49]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ if the value is unknown or if there is no equalization
+ data available or defined."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Figure 6-23."
+ ::= { docsIfCmtsCmStatusEntry 8 }
+
+docsIfCmtsCmStatusValue OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ ranging(2),
+ rangingAborted(3),
+ rangingComplete(4),
+ ipComplete(5),
+ registrationComplete(6),
+ accessDenied(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Cable Modem connectivity state, as specified
+ in the RF Interface Specification. Returned status
+ information is the CM status as assumed by the CMTS,
+ and indicates the following events:
+ other(1)
+ Any state other than below.
+ ranging(2)
+ The CMTS has received an Initial Ranging Request
+ message from the CM, and the ranging process is not
+ yet complete.
+ rangingAborted(3)
+ The CMTS has sent a Ranging Abort message to the CM.
+ rangingComplete(4)
+ The CMTS has sent a Ranging Complete message to the CM.
+ ipComplete(5)
+ The CMTS has received a DHCP reply message and forwarded
+ it to the CM.
+ registrationComplete(6)
+ The CMTS has sent a Registration Response mesage to
+ the CM.
+ accessDenied(7)
+ The CMTS has sent a Registration Aborted message
+ to the CM.
+ The CMTS only needs to report states it is able to detect."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface Specification,
+ Chapter 7.2."
+ ::= { docsIfCmtsCmStatusEntry 9 }
+
+
+
+St. Johns Standard [Page 50]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+docsIfCmtsCmStatusUnerroreds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Codewords received without error from this Cable Modem."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.3"
+ ::= { docsIfCmtsCmStatusEntry 10 }
+
+docsIfCmtsCmStatusCorrecteds OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Codewords received with correctable errors from this
+ Cable Modem."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.3"
+ ::= { docsIfCmtsCmStatusEntry 11 }
+
+docsIfCmtsCmStatusUncorrectables OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Codewords received with uncorrectable errors from this
+ Cable Modem."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.3"
+ ::= { docsIfCmtsCmStatusEntry 12 }
+
+docsIfCmtsCmStatusSignalNoise OBJECT-TYPE
+ SYNTAX TenthdB
+ UNITS "dB"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Signal/Noise ratio as perceived for upstream data from
+ this Cable Modem.
+ If the Signal/Noise is unknown, this object returns
+ a value of zero."
+ ::= { docsIfCmtsCmStatusEntry 13 }
+
+docsIfCmtsCmStatusMicroreflections OBJECT-TYPE
+
+
+
+St. Johns Standard [Page 51]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ SYNTAX Integer32 (0..255)
+ UNITS "dBc"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total microreflections including in-channel response
+ as perceived on this interface, measured in dBc below
+ the signal level.
+ This object is not assumed to return an absolutely
+ accurate value, but should give a rough indication
+ of microreflections received on this interface.
+ It is up to the implementor to provide information
+ as accurate as possible."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Table 2-1 and 2-2"
+ ::= { docsIfCmtsCmStatusEntry 14 }
+
+--
+-- The CMTS Service Table.
+--
+
+docsIfCmtsServiceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfCmtsServiceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes the attributes of upstream service queues
+ in a Cable Modem Termination System."
+ ::= { docsIfCmtsObjects 4 }
+
+docsIfCmtsServiceEntry OBJECT-TYPE
+ SYNTAX DocsIfCmtsServiceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes the attributes of a single upstream bandwidth
+ service queue.
+ Entries in this table exist for each ifEntry with an
+ ifType of docsCableMaclayer(127), and for each service
+ queue (Service ID) within this MAC layer.
+ Entries in this table are created with the creation of
+ individual Service IDs by the MAC layer and removed
+ when a Service ID is removed."
+ INDEX { ifIndex, docsIfCmtsServiceId }
+ ::= { docsIfCmtsServiceTable 1 }
+
+DocsIfCmtsServiceEntry ::= SEQUENCE {
+
+
+
+St. Johns Standard [Page 52]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ docsIfCmtsServiceId Integer32,
+ docsIfCmtsServiceCmStatusIndex Integer32,
+ docsIfCmtsServiceAdminStatus INTEGER,
+ docsIfCmtsServiceQosProfile Integer32,
+ docsIfCmtsServiceCreateTime TimeStamp,
+ docsIfCmtsServiceInOctets Counter32,
+ docsIfCmtsServiceInPackets Counter32
+ }
+
+docsIfCmtsServiceId OBJECT-TYPE
+ SYNTAX Integer32 (1..16383)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Identifies a service queue for upstream bandwidth. The
+ attributes of this service queue are shared between the
+ Cable Modem and the Cable Modem Termination System.
+ The CMTS allocates upstream bandwidth to this service
+ queue based on requests from the CM and on the class of
+ service associated with this queue."
+ ::= { docsIfCmtsServiceEntry 1 }
+
+docsIfCmtsServiceCmStatusIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Pointer to an entry in docsIfCmtsCmStatusTable identifying
+ the Cable Modem using this Service Queue. If multiple
+ Cable Modems are using this Service Queue, the value of
+ this object is zero."
+ ::= { docsIfCmtsServiceEntry 2 }
+
+docsIfCmtsServiceAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2),
+ destroyed(3) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allows a service class for a particular modem to be
+ suppressed, (re-)enabled, or deleted altogether."
+ ::= { docsIfCmtsServiceEntry 3 }
+
+docsIfCmtsServiceQosProfile OBJECT-TYPE
+ SYNTAX Integer32 (0..16383)
+ MAX-ACCESS read-only
+
+
+
+St. Johns Standard [Page 53]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ STATUS current
+ DESCRIPTION
+ "The index in docsIfQosProfileTable describing the quality
+ of service attributes associated with this particular
+ service. If no associated docsIfQosProfileTable entry
+ exists, this object returns a value of zero."
+ ::= { docsIfCmtsServiceEntry 4 }
+
+docsIfCmtsServiceCreateTime OBJECT-TYPE
+
+-- SYNTAX TimeTicks
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this entry was created."
+ ::= { docsIfCmtsServiceEntry 5 }
+
+docsIfCmtsServiceInOctets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cumulative number of Packet Data octets received
+ on this Service ID. The count does not include the
+ size of the Cable MAC header"
+ ::= { docsIfCmtsServiceEntry 6 }
+
+docsIfCmtsServiceInPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cumulative number of Packet Data packets received
+ on this Service ID."
+ ::= { docsIfCmtsServiceEntry 7 }
+
+--
+-- The following table provides upstream channel modulation profiles.
+-- Entries in this table can be
+-- re-used by one or more upstream channels. An upstream channel will
+-- have a modulation profile
+-- for each value of docsIfModIntervalUsageCode.
+--
+
+docsIfCmtsModulationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfCmtsModulationEntry
+ MAX-ACCESS not-accessible
+
+
+
+St. Johns Standard [Page 54]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ STATUS current
+ DESCRIPTION
+ "Describes a modulation profile associated with one or more
+ upstream channels."
+ ::= { docsIfCmtsObjects 5 }
+
+docsIfCmtsModulationEntry OBJECT-TYPE
+ SYNTAX DocsIfCmtsModulationEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Describes a modulation profile for an Interval Usage Code
+ for one or more upstream channels.
+ Entries in this table are created by the operator. Initial
+ default entries may be created at system initialization
+ time. No individual objects have to be specified in order
+ to create an entry in this table.
+ Note that some objects do not have DEFVALs, but do have
+ calculated defaults and need not be specified during row
+ creation.
+ There is no restriction on the changing of values in this
+ table while their associated rows are active."
+ INDEX { docsIfCmtsModIndex, docsIfCmtsModIntervalUsageCode }
+ ::= { docsIfCmtsModulationTable 1 }
+
+DocsIfCmtsModulationEntry ::= SEQUENCE {
+ docsIfCmtsModIndex Integer32,
+ docsIfCmtsModIntervalUsageCode INTEGER,
+ docsIfCmtsModControl RowStatus,
+ docsIfCmtsModType INTEGER,
+ docsIfCmtsModPreambleLen Integer32,
+ docsIfCmtsModDifferentialEncoding TruthValue,
+ docsIfCmtsModFECErrorCorrection Integer32,
+ docsIfCmtsModFECCodewordLength Integer32,
+ docsIfCmtsModScramblerSeed Integer32,
+ docsIfCmtsModMaxBurstSize Integer32,
+ docsIfCmtsModGuardTimeSize Unsigned32,
+ docsIfCmtsModLastCodewordShortened TruthValue,
+ docsIfCmtsModScrambler TruthValue
+ }
+
+docsIfCmtsModIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index into the Channel Modulation table representing
+ a group of Interval Usage Codes, all associated with the
+
+
+
+St. Johns Standard [Page 55]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ same channel."
+ ::= { docsIfCmtsModulationEntry 1 }
+
+docsIfCmtsModIntervalUsageCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ request(1),
+ requestData(2),
+ initialRanging(3),
+ periodicRanging(4),
+ shortData(5),
+ longData(6)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index into the Channel Modulation table which, when
+ grouped with other Interval Usage Codes, fully
+ instantiate all modulation sets for a given upstream
+ channel."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Table 6-16."
+ ::= { docsIfCmtsModulationEntry 2 }
+
+docsIfCmtsModControl OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Controls and reflects the status of rows in this table."
+ ::= { docsIfCmtsModulationEntry 3 }
+
+docsIfCmtsModType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ qpsk(2),
+ qam16(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The modulation type used on this channel. Returns
+ other(1) if the modulation type is neither qpsk or
+ qam16. See the reference for the modulation profiles
+ implied by qpsk or qam16. See the conformance object for
+ write conditions and limitations."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+
+
+
+St. Johns Standard [Page 56]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ Section 4.2.2."
+ DEFVAL { qpsk }
+ ::= { docsIfCmtsModulationEntry 4 }
+
+docsIfCmtsModPreambleLen OBJECT-TYPE
+ SYNTAX Integer32 (0..1024)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The preamble length for this modulation profile in bits.
+ Default value is the minimum needed by the implementation
+ at the CMTS for the given modulation profile."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.5."
+ ::= { docsIfCmtsModulationEntry 5 }
+
+docsIfCmtsModDifferentialEncoding OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies whether or not differential encoding is used
+ on this channel."
+ DEFVAL { false }
+ ::= { docsIfCmtsModulationEntry 6 }
+
+docsIfCmtsModFECErrorCorrection OBJECT-TYPE
+ SYNTAX Integer32 (0..10)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of correctable errored bytes (t) used in
+ forward error correction code. The value of 0 indicates
+ no correction is employed. The number of check bytes
+ appended will be twice this value."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.3."
+ DEFVAL { 0 }
+ ::= { docsIfCmtsModulationEntry 7 }
+
+docsIfCmtsModFECCodewordLength OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of data bytes (k) in the forward error
+
+
+
+St. Johns Standard [Page 57]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ correction codeword.
+ This object is not used if docsIfCmtsModFECErrorCorrection
+ is zero."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.3."
+ DEFVAL { 32 }
+ ::= { docsIfCmtsModulationEntry 8 }
+
+docsIfCmtsModScramblerSeed OBJECT-TYPE
+ SYNTAX Integer32 (0..32767)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The 15 bit seed value for the scrambler polynomial."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.4."
+ DEFVAL { 0 }
+ ::= { docsIfCmtsModulationEntry 9 }
+
+docsIfCmtsModMaxBurstSize OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of mini-slots that can be transmitted
+ during this channel's burst time. Returns zero if the
+ burst length is bounded by the allocation MAP rather than
+ this profile.
+ Default value is 0 except for shortData, where it is 8."
+ ::= { docsIfCmtsModulationEntry 10 }
+
+docsIfCmtsModGuardTimeSize OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of symbol-times which must follow the end of
+ this channel's burst. Default value is the minimum time
+ needed by the implementation for this modulation profile."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.7."
+ ::= { docsIfCmtsModulationEntry 11 }
+
+docsIfCmtsModLastCodewordShortened OBJECT-TYPE
+ SYNTAX TruthValue
+
+
+
+St. Johns Standard [Page 58]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates if the last FEC codeword is truncated."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.10."
+ DEFVAL { true }
+ ::= { docsIfCmtsModulationEntry 12 }
+
+docsIfCmtsModScrambler OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates if the scrambler is employed."
+ REFERENCE
+ "DOCSIS Radio Frequency Interface specification,
+ Section 4.2.4."
+ DEFVAL { false }
+ ::= { docsIfCmtsModulationEntry 13 }
+
+docsIfCmtsQosProfilePermissions OBJECT-TYPE
+ SYNTAX BITS {
+ createByManagement(0),
+ updateByManagement(1),
+ createByModems(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies permitted methods of creating
+ entries in docsIfQosProfileTable.
+ CreateByManagement(0) is set if entries can be created
+ using SNMP. UpdateByManagement(1) is set if updating
+ entries using SNMP is permitted. CreateByModems(2)
+ is set if entries can be created based on information
+ in REG-REQ MAC messages received from Cable Modems.
+ Information in this object is only applicable if
+ docsIfQosProfileTable is implemented as read-create.
+ Otherwise, this object is implemented as read-only
+ and returns CreateByModems(2).
+ Either CreateByManagement(0) or CreateByModems(1)
+ must be set when writing to this object."
+ ::= { docsIfCmtsObjects 6 }
+
+docsIfCmtsMacToCmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DocsIfCmtsMacToCmEntry
+
+
+
+St. Johns Standard [Page 59]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This is a table to provide a quick access index into the
+ docsIfCmtsCmStatusTable. There is exactly one row in this
+ table for each row in the docsIfCmtsCmStatusTable. In
+ general, the management station should use this table only
+ to get a pointer into the docsIfCmtsCmStatusTable (which
+ corresponds to the CM's RF interface MAC address), and
+ should not iterate (e.g. GetNext through) this table."
+ ::= { docsIfCmtsObjects 7 }
+
+docsIfCmtsMacToCmEntry OBJECT-TYPE
+ SYNTAX DocsIfCmtsMacToCmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A row in the docsIfCmtsMacToCmTable.
+ An entry in this table exists for each Cable Modem
+ that is connected to the CMTS implementing this table."
+ INDEX { docsIfCmtsCmMac }
+ ::= {docsIfCmtsMacToCmTable 1 }
+
+DocsIfCmtsMacToCmEntry ::= SEQUENCE {
+ docsIfCmtsCmMac MacAddress,
+ docsIfCmtsCmPtr Integer32
+ }
+
+docsIfCmtsCmMac OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The RF side MAC address for the referenced CM. (E.g. the
+ interface on the CM that has docsCableMacLayer(127) as
+ its ifType."
+ ::= { docsIfCmtsMacToCmEntry 1 }
+
+docsIfCmtsCmPtr OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An row index into docsIfCmtsCmStatusTable. When queried
+ with the correct instance value (e.g. a CM's MAC address),
+ returns the index in docsIfCmtsCmStatusTable which
+ represents that CM."
+ ::= { docsIfCmtsMacToCmEntry 2 }
+
+
+
+St. Johns Standard [Page 60]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+--
+-- notification group is for future extension.
+--
+docsIfNotification OBJECT IDENTIFIER ::= { docsIfMib 2 }
+
+docsIfConformance OBJECT IDENTIFIER ::= { docsIfMib 3 }
+docsIfCompliances OBJECT IDENTIFIER ::= { docsIfConformance 1 }
+docsIfGroups OBJECT IDENTIFIER ::= { docsIfConformance 2 }
+
+-- compliance statements
+
+docsIfBasicCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for devices that implement
+ MCNS/DOCSIS compliant Radio Frequency Interfaces."
+
+MODULE -- docsIfMib
+
+-- unconditionally mandatory groups
+MANDATORY-GROUPS {
+ docsIfBasicGroup
+ }
+
+-- conditionally mandatory group
+GROUP docsIfCmGroup
+ DESCRIPTION
+ "This group is implemented only in Cable Modems, not in
+ Cable Modem Termination Systems."
+
+-- conditionally mandatory group
+GROUP docsIfCmtsGroup
+ DESCRIPTION
+ "This group is implemented only in Cable Modem Termination
+ Systems, not in Cable Modems."
+
+OBJECT docsIfDownChannelFrequency
+ WRITE-SYNTAX Integer32 (54000000..860000000)
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems. The values above are
+ appropriate for a cable plant using a Sub-Split channel
+ plan. If DOCSIS is extended to cover other types of
+ channel plans (and frequency allocations) this object
+ will be modified accordingly."
+
+OBJECT docsIfDownChannelWidth
+
+
+
+St. Johns Standard [Page 61]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ WRITE-SYNTAX Integer32 (6000000)
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "It is conformant to implement this object as read-only.
+ In Cable Modems, this object is always implemented as
+ read-only. The above value is appropriate for cable
+ plants running under NTSC (National Television
+ Standards Committee) standards. If DOCSIS is extended to
+ work with other standard (e.g. European standards), this
+ object will be modified accordingly."
+
+OBJECT docsIfDownChannelModulation
+ WRITE-SYNTAX INTEGER {
+ qam64 (3),
+ qam256 (4)
+ }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems."
+
+OBJECT docsIfDownChannelInterleave
+ WRITE-SYNTAX INTEGER {
+ taps8Increment16(3),
+ taps16Increment8(4),
+ taps32Increment4(5),
+ taps64Increment2(6),
+ taps128Increment1(7)
+ }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems."
+
+OBJECT docsIfDownChannelPower
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems."
+
+OBJECT docsIfUpChannelFrequency
+ WRITE-SYNTAX Integer32 (5000000..42000000)
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems.The values above are
+ appropriate for a cable plant using a Sub-Split channel
+ plan. If DOCSIS is extended to cover other types of
+
+
+
+St. Johns Standard [Page 62]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ channel plans (and frequency allocations) this object
+ will be modified accordingly."
+
+OBJECT docsIfUpChannelWidth
+ WRITE-SYNTAX Integer32 (200000..3200000)
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems.The above value is appropriate
+ for cable plants running under NTSC (National Television
+ Standards Committee) standards. If DOCSIS is extended to
+ work with other standard (e.g. European standards), this
+ object will be modified accordingly."
+
+OBJECT docsIfUpChannelModulationProfile
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems."
+
+OBJECT docsIfUpChannelSlotSize
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is always read-only in Cable Modems.
+ It is compliant to implement this object as read-only
+ in Cable Modem Termination Systems."
+
+OBJECT docsIfUpChannelRangingBackoffStart
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems."
+
+OBJECT docsIfUpChannelRangingBackoffEnd
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems."
+
+OBJECT docsIfUpChannelTxBackoffStart
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems."
+
+OBJECT docsIfUpChannelTxBackoffEnd
+ MIN-ACCESS read-only
+ DESCRIPTION
+
+
+
+St. Johns Standard [Page 63]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ "Read-write in Cable Modem Termination Systems;
+ read-only in Cable Modems."
+
+OBJECT docsIfQosProfPriority
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is always read-only in Cable Modems.
+ It is compliant to implement this object as read-only
+ in Cable Modem Termination Systems."
+
+OBJECT docsIfQosProfMaxUpBandwidth
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is always read-only in Cable Modems.
+ It is compliant to implement this object as read-only
+ in Cable Modem Termination Systems."
+
+OBJECT docsIfQosProfGuarUpBandwidth
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is always read-only in Cable Modems.
+ It is compliant to implement this object as read-only
+ in Cable Modem Termination Systems."
+
+OBJECT docsIfQosProfMaxDownBandwidth
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is always read-only in Cable Modems.
+ It is compliant to implement this object as read-only
+ in Cable Modem Termination Systems."
+
+OBJECT docsIfQosProfMaxTxBurst
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is always read-only in Cable Modems.
+ It is compliant to implement this object as read-only
+ in Cable Modem Termination Systems."
+
+OBJECT docsIfQosProfBaselinePrivacy
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is always read-only in Cable Modems.
+ It is compliant to implement this object as read-only
+ in Cable Modem Termination Systems."
+
+OBJECT docsIfQosProfStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+
+
+
+St. Johns Standard [Page 64]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ "This object is always read-only in Cable Modems.
+ It is compliant to implement this object as read-only
+ in Cable Modem Termination Systems."
+
+OBJECT docsIfCmtsServiceAdminStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmtsSyncInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmtsUcdInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmtsInsertInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmtsInvitedRangingAttempts
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmtsQosProfilePermissions
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "It is compliant to implement this object as read-only."
+
+OBJECT docsIfCmtsModType
+ WRITE-SYNTAX INTEGER {
+ qpsk (2),
+ qam16 (3)
+ }
+ DESCRIPTION
+ "Management station may only set 16QAM or QPSK modulation,
+ but others might be possible based on device configuration."
+
+
+ ::= { docsIfCompliances 1 }
+
+docsIfBasicGroup OBJECT-GROUP
+ OBJECTS {
+
+
+
+St. Johns Standard [Page 65]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ docsIfDownChannelId,
+ docsIfDownChannelFrequency,
+ docsIfDownChannelWidth,
+ docsIfDownChannelModulation,
+ docsIfDownChannelInterleave,
+ docsIfDownChannelPower,
+ docsIfUpChannelId,
+ docsIfUpChannelFrequency,
+ docsIfUpChannelWidth,
+ docsIfUpChannelModulationProfile,
+ docsIfUpChannelSlotSize,
+ docsIfUpChannelTxTimingOffset,
+ docsIfUpChannelRangingBackoffStart,
+ docsIfUpChannelRangingBackoffEnd,
+ docsIfUpChannelTxBackoffStart,
+ docsIfUpChannelTxBackoffEnd,
+ docsIfQosProfPriority,
+ docsIfQosProfMaxUpBandwidth,
+ docsIfQosProfGuarUpBandwidth,
+ docsIfQosProfMaxDownBandwidth,
+ docsIfQosProfMaxTxBurst,
+ docsIfQosProfBaselinePrivacy,
+ docsIfQosProfStatus,
+ docsIfSigQIncludesContention,
+ docsIfSigQUnerroreds,
+ docsIfSigQCorrecteds,
+ docsIfSigQUncorrectables,
+ docsIfSigQSignalNoise,
+ docsIfSigQMicroreflections,
+ docsIfSigQEqualizationData
+ }
+ STATUS current
+ DESCRIPTION
+ "Group of objects implemented in both Cable Modems and
+ Cable Modem Termination Systems."
+ ::= { docsIfGroups 1 }
+
+-- The following table was modified to correct naming conventions for
+-- Counter32 variables.
+docsIfCmGroup OBJECT-GROUP
+ OBJECTS {
+ docsIfCmCmtsAddress,
+ docsIfCmCapabilities,
+-- docsIfCmRangingRespTimeout,
+ docsIfCmRangingTimeout,
+ docsIfCmStatusValue,
+ docsIfCmStatusCode,
+ docsIfCmStatusTxPower,
+
+
+
+St. Johns Standard [Page 66]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ docsIfCmStatusResets,
+ docsIfCmStatusLostSyncs,
+ docsIfCmStatusInvalidMaps,
+ docsIfCmStatusInvalidUcds,
+-- docsIfCmStatusInvalidRangingResp,
+ docsIfCmStatusInvalidRangingResponses,
+-- docsIfCmStatusInvalidRegistrationResp,
+ docsIfCmStatusInvalidRegistrationResponses,
+ docsIfCmStatusT1Timeouts,
+ docsIfCmStatusT2Timeouts,
+ docsIfCmStatusT3Timeouts,
+ docsIfCmStatusT4Timeouts,
+ docsIfCmStatusRangingAborteds,
+ docsIfCmServiceQosProfile,
+ docsIfCmServiceTxSlotsImmed,
+ docsIfCmServiceTxSlotsDed,
+ docsIfCmServiceTxRetries,
+-- docsIfCmServiceTxExceeded,
+ docsIfCmServiceTxExceededs,
+ docsIfCmServiceRqRetries,
+-- docsIfCmServiceRqExceeded
+ docsIfCmServiceRqExceededs
+ }
+ STATUS current
+ DESCRIPTION
+ "Group of objects implemented in Cable Modems."
+ ::= { docsIfGroups 2 }
+
+docsIfCmtsGroup OBJECT-GROUP
+ OBJECTS {
+ docsIfCmtsCapabilities,
+ docsIfCmtsSyncInterval,
+ docsIfCmtsUcdInterval,
+ docsIfCmtsMaxServiceIds,
+-- docsIfCmtsInsertionInterval,
+ docsIfCmtsInvitedRangingAttempts,
+ docsIfCmtsInsertInterval,
+ docsIfCmtsStatusInvalidRangeReqs,
+ docsIfCmtsStatusRangingAborteds,
+ docsIfCmtsStatusInvalidRegReqs,
+ docsIfCmtsStatusFailedRegReqs,
+ docsIfCmtsStatusInvalidDataReqs,
+ docsIfCmtsStatusT5Timeouts,
+ docsIfCmtsCmStatusMacAddress,
+ docsIfCmtsCmStatusIpAddress,
+ docsIfCmtsCmStatusDownChannelIfIndex,
+ docsIfCmtsCmStatusUpChannelIfIndex,
+ docsIfCmtsCmStatusRxPower,
+
+
+
+St. Johns Standard [Page 67]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ docsIfCmtsCmStatusTimingOffset,
+ docsIfCmtsCmStatusEqualizationData,
+ docsIfCmtsCmStatusValue,
+ docsIfCmtsCmStatusUnerroreds,
+ docsIfCmtsCmStatusCorrecteds,
+ docsIfCmtsCmStatusUncorrectables,
+ docsIfCmtsCmStatusSignalNoise,
+ docsIfCmtsCmStatusMicroreflections,
+ docsIfCmtsServiceCmStatusIndex,
+ docsIfCmtsServiceAdminStatus,
+ docsIfCmtsServiceQosProfile,
+ docsIfCmtsServiceCreateTime,
+ docsIfCmtsServiceInOctets,
+ docsIfCmtsServiceInPackets,
+ docsIfCmtsModType,
+ docsIfCmtsModControl,
+ docsIfCmtsModPreambleLen,
+ docsIfCmtsModDifferentialEncoding,
+ docsIfCmtsModFECErrorCorrection,
+ docsIfCmtsModFECCodewordLength,
+ docsIfCmtsModScramblerSeed,
+ docsIfCmtsModMaxBurstSize,
+ docsIfCmtsModGuardTimeSize,
+ docsIfCmtsModLastCodewordShortened,
+ docsIfCmtsModScrambler,
+ docsIfCmtsQosProfilePermissions,
+ docsIfCmtsCmPtr
+ }
+ STATUS current
+ DESCRIPTION
+ "Group of objects implemented in Cable Modem Termination
+ Systems."
+ ::= { docsIfGroups 3 }
+
+
+docsIfObsoleteGroup OBJECT-GROUP
+ OBJECTS {
+ docsIfCmRangingRespTimeout,
+ docsIfCmtsInsertionInterval
+ }
+ STATUS obsolete
+ DESCRIPTION
+ "Group of objects obsoleted."
+ ::= { docsIfGroups 4 }
+
+END
+
+
+
+
+
+St. Johns Standard [Page 68]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+5. Acknowledgments
+
+ This document was produced by the IPCDN Working Group. It is based
+ on a document written by Pam Anderson from CableLabs, Wilson Sawyer
+ from BayNetworks, and Rich Woundy from Continental Cablevision. The
+ original working group editor, Guenter Roeck of cisco Systems, did
+ much of the grunt work of putting the document into its current form.
+
+ Special thanks is also due to Azlina Palmer, who helped a lot
+ reviewing the document.
+
+6. References
+
+ [1] Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture for
+ Describing SNMP Management Frameworks", RFC 2571, April 1999.
+
+ [2] Rose, M. and K. McCloghrie, "Structure and Identification of
+ Management Information for TCP/IP-based Internets", STD 16, RFC
+ 1155, May 1990.
+
+ [3] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD 16,
+ RFC 1212, March 1991.
+
+ [4] Rose, M., "A Convention for Defining Traps for use with the
+ SNMP", RFC 1215, March 1991.
+
+ [5] McCloghrie, K., Perkins, D. and J. Schoenwaelder, "Structure of
+ Management Information for Version 2 (SMIv2)", STD 58, RFC 2578,
+ April 1999.
+
+ [6] McCloghrie, K., Perkins, D. and J. Schoenwaelder, "Textual
+ Conventions for SMIv2", STD 58, RFC 2579, April 1999.
+
+ [7] McCloghrie, K., Perkins, D. and J. Schoenwaelder, "Conformance
+ Statements for SMIv2", STD 58, RFC 2580, April 1999.
+
+ [8] Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple
+ Management Protocol", STD 15, RFC 1157, May 1990.
+
+ [9] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
+ "Introduction to Community-based SNMPv2", RFC 1901, January
+ 1996.
+
+ [10] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Transport
+ Mappings for Version 2 of the Simple Network Management Protocol
+ (SNMPv2)", RFC 1906, January 1996.
+
+
+
+
+
+St. Johns Standard [Page 69]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ [11] Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message
+ Processing and Dispatching for the Simple Network Management
+ Protocol (SNMP)", RFC 2572, April 1999.
+
+ [12] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM)
+ for version 3 of the Simple Network Management Protocol
+ (SNMPv3)", RFC 2574, April 1999.
+
+ [13] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Protocol
+ Operations for Version 2 of the Simple Network Management
+ Protocol (SNMPv2)", RFC 1905, January 1996.
+
+ [14] Levi, D., Meyer, P. and B. Stewart, "SNMP Applications", RFC
+ 2573, April 1999.
+
+ [15] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based Access
+ Control Model (VACM) for the Simple Network Management Protocol
+ (SNMP)", RFC 2575, April 1999.
+
+ [16] "Data-Over-Cable Service Interface Specifications: Cable Modem
+ Radio Frequency Interface Specification SP-RFI-I04-980724",
+ DOCSIS, July 1998,
+ http://www.cablemodem.com/public/pubtechspec/SP-RFI-I04-
+ 980724.pdf.
+
+ [17] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB
+ using SMIv2", RFC 2233, November 1997.
+
+ [18] StJohns, M. , "Cable Device Management Information Base for
+ DOCSIS Compliant Cable Modems and Cable Modem Termination
+ Systems", RFC2669, August 1999.
+
+ [19] Proakis, John G., "Digital Communications, 3rd Edition",
+ McGraw-Hill, New York, New York, 1995, ISBN 0-07-051726-6
+
+ [20] "Transmission Systems for Interactive Cable Television Services,
+ Annex B", J.112, International Telecommunications Union, March
+ 1998.
+
+7. Security Considerations
+
+ This MIB relates to a system which will provide metropolitan public
+ internet access. As such, improper manipulation of the objects
+ represented by this MIB may result in denial of service to a large
+ number of end-users. In addition, manipulation of the
+ docsIfCmServiceQosProfile, docsIfCmtsServerQosProfile, and the
+ elements of docsIfQosProfileTable may allow an end-user to improve
+ their service response or decrease other subscriber service response.
+
+
+
+St. Johns Standard [Page 70]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+ This MIB does not affect confidentiality, authentication or
+ authorization of services on a cable modem system. For
+ authentication and authorization, please see the related document
+ "Cable Device Management Information Base for DOCSIS compliant Cable
+ Modems and Cable Modem Termination Systems" [18]. For
+ confidentiality, the working group expects to issue a MIB which
+ describes the management of the DOCSIS Baseline Privacy mechanism.
+
+8. Intellectual Property
+
+ The IETF takes no position regarding the validity or scope of any
+ intellectual property or other rights that might be claimed to
+ pertain to the implementation or use of the technology described in
+ this document or the extent to which any license under such rights
+ might or might not be available; neither does it represent that it
+ has made any effort to identify any such rights. Information on the
+ IETF's procedures with respect to rights in standards-track and
+ standards-related documentation can be found in BCP-11. Copies of
+ claims of rights made available for publication and any assurances of
+ licenses to be made available, or the result of an attempt made to
+ obtain a general license or permission for the use of such
+ proprietary rights by implementors or users of this specification can
+ be obtained from the IETF Secretariat.
+
+ The IETF invites any interested party to bring to its attention any
+ copyrights, patents or patent applications, or other proprietary
+ rights which may cover technology that may be required to practice
+ this standard. Please address the information to the IETF Executive
+ Director.
+
+9. Author's Address
+
+ Michael StJohns
+ @Home Network
+ 425 Broadway
+ Redwood City, CA 94063
+
+ Phone: +1 650 569 5368
+ EMail: stjohns@corp.home.net
+
+
+
+
+
+
+
+
+
+
+
+
+St. Johns Standard [Page 71]
+
+RFC 2670 DOCSIS RF Interface MIB August 1999
+
+
+10. Full Copyright Statement
+
+ Copyright (C) The Internet Society (1999). All Rights Reserved.
+
+ This document and translations of it may be copied and furnished to
+ others, and derivative works that comment on or otherwise explain it
+ or assist in its implementation may be prepared, copied, published
+ and distributed, in whole or in part, without restriction of any
+ kind, provided that the above copyright notice and this paragraph are
+ included on all such copies and derivative works. However, this
+ document itself may not be modified in any way, such as by removing
+ the copyright notice or references to the Internet Society or other
+ Internet organizations, except as needed for the purpose of
+ developing Internet standards in which case the procedures for
+ copyrights defined in the Internet Standards process must be
+ followed, or as required to translate it into languages other than
+ English.
+
+ The limited permissions granted above are perpetual and will not be
+ revoked by the Internet Society or its successors or assigns.
+
+ This document and the information contained herein is provided on an
+ "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
+ TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+ BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
+ HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
+ MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+
+Acknowledgement
+
+ Funding for the RFC Editor function is currently provided by the
+ Internet Society.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+St. Johns Standard [Page 72]
+