diff options
| author | Thomas Voss <mail@thomasvoss.com> | 2024-11-27 20:54:24 +0100 |
|---|---|---|
| committer | Thomas Voss <mail@thomasvoss.com> | 2024-11-27 20:54:24 +0100 |
| commit | 4bfd864f10b68b71482b35c818559068ef8d5797 (patch) | |
| tree | e3989f47a7994642eb325063d46e8f08ffa681dc /doc/rfc/rfc4740.txt | |
| parent | ea76e11061bda059ae9f9ad130a9895cc85607db (diff) | |
doc: Add RFC documents
Diffstat (limited to 'doc/rfc/rfc4740.txt')
| -rw-r--r-- | doc/rfc/rfc4740.txt | 4035 |
1 files changed, 4035 insertions, 0 deletions
diff --git a/doc/rfc/rfc4740.txt b/doc/rfc/rfc4740.txt new file mode 100644 index 0000000..2154334 --- /dev/null +++ b/doc/rfc/rfc4740.txt @@ -0,0 +1,4035 @@ + + + + + + +Network Working Group M. Garcia-Martin, Ed. +Request for Comments: 4740 Nokia +Category: Standards Track M. Belinchon + M. Pallares-Lopez + C. Canales-Valenzuela + Ericsson + K. Tammi + Nokia + November 2006 + + + Diameter Session Initiation Protocol (SIP) Application + +Status of This Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Copyright Notice + + Copyright (C) The IETF Trust (2006). + +Abstract + + This document specifies the Diameter Session Initiation Protocol + (SIP) application. This is a Diameter application that allows a + Diameter client to request authentication and authorization + information. This application is designed to be used in conjunction + with SIP and provides a Diameter client co-located with a SIP server, + with the ability to request the authentication of users and + authorization of SIP resources usage from a Diameter server. + + + + + + + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 1] + +RFC 4740 Diameter SIP Application November 2006 + + +Table of Contents + + 1. Introduction ....................................................4 + 2. Terminology .....................................................5 + 3. Definitions .....................................................5 + 4. Acronyms ........................................................6 + 5. Applicability Statement .........................................6 + 6. Overview of Operation ...........................................7 + 6.1. General Architecture .......................................7 + 6.2. Diameter Server Authenticates the User .....................9 + 6.3. Delegating Final Authentication Check to the SIP Server ...12 + 6.4. SIP Server Requests Authentication and Authorization ......15 + 6.5. Locating the Recipient of the SIP Request .................16 + 6.6. Update of the User Profile ................................17 + 6.7. SIP Soft State Termination ................................18 + 6.8. Diameter Server Discovery .................................19 + 7. Advertising Application Support ................................21 + 8. Diameter SIP Application Command Codes .........................22 + 8.1. User-Authorization-Request (UAR) Command ..................22 + 8.2. User-Authorization-Answer (UAA) Command ...................23 + 8.3. Server-Assignment-Request (SAR) Command ...................27 + 8.4. Server-Assignment-Answer (SAA) Command ....................29 + 8.5. Location-Info-Request (LIR) Command .......................33 + 8.6. Location-Info-Answer (LIA) Command ........................33 + 8.7. Multimedia-Auth-Request (MAR) Command .....................35 + 8.8. Multimedia-Auth-Answer (MAA) Command ......................36 + 8.9. Registration-Termination-Request (RTR) Command ............39 + 8.10. Registration-Termination-Answer (RTA) Command ............39 + 8.11. Push-Profile-Request (PPR) Command .......................41 + 8.12. Push-Profile-Answer (PPA) Command ........................42 + 9. Diameter SIP Application AVPs ..................................44 + 9.1. SIP-Accounting-Information AVP ............................46 + 9.1.1. SIP-Accounting-Server-URI AVP ......................47 + 9.1.2. SIP-Credit-Control-Server-URI AVP ..................47 + 9.2. SIP-Server-URI AVP ........................................47 + 9.3. SIP-Server-Capabilities AVP ...............................47 + 9.3.1. SIP-Mandatory-Capability AVP .......................48 + 9.3.2. SIP-Optional-Capability AVP ........................48 + 9.4. SIP-Server-Assignment-Type AVP ............................48 + 9.5. SIP-Auth-Data-Item AVP ....................................50 + 9.5.1. SIP-Authentication-Scheme AVP ......................50 + 9.5.2. SIP-Item-Number AVP ................................51 + 9.5.3. SIP-Authenticate AVP ...............................51 + 9.5.4. SIP-Authorization AVP ..............................52 + 9.5.5. SIP-Authentication-Info AVP ........................52 + 9.5.6. Digest AVPs ........................................53 + 9.6. SIP-Number-Auth-Items AVP .................................55 + + + + +Garcia-Martin, et al. Standards Track [Page 2] + +RFC 4740 Diameter SIP Application November 2006 + + + 9.7. SIP-Deregistration-Reason AVP .............................55 + 9.7.1. SIP-Reason-Code AVP ................................55 + 9.7.2. SIP-Reason-Info AVP ................................56 + 9.8. SIP-AOR AVP ...............................................56 + 9.9. SIP-Visited-Network-Id AVP ................................56 + 9.10. SIP-User-Authorization-Type AVP ..........................56 + 9.11. SIP-Supported-User-Data-Type AVP .........................57 + 9.12. SIP-User-Data AVP ........................................57 + 9.12.1. SIP-User-Data-Type AVP ............................58 + 9.12.2. SIP-User-Data-Contents AVP ........................58 + 9.13. SIP-User-Data-Already-Available AVP ......................58 + 9.14. SIP-Method AVP ...........................................59 + 10. New Values for Existing AVPs ..................................59 + 10.1. Extension to the Result-Code AVP Values ..................59 + 10.1.1. Success Result-Code AVP Values ....................59 + 10.1.2. Transient Failures Result-Code AVP Values .........60 + 10.1.3. Permanent Failures Result-Code AVP Values .........60 + 11. Authentication Details ........................................61 + 12. Migration from RADIUS .........................................63 + 12.1. Gateway from RADIUS Client to Diameter Server ............63 + 12.2. Gateway from Diameter Client to RADIUS Server ............63 + 12.3. Known Limitations ........................................64 + 13. IANA Considerations ...........................................64 + 13.1. Application Identifier ...................................64 + 13.2. Command Codes ............................................65 + 13.3. AVP Codes ................................................65 + 13.4. Additional Values for the Result-Code AVP Value ..........65 + 13.5. Creation of the SIP-Server-Assignment-Type + Section in the AAA .......................................66 + 13.6. Creation of the SIP-Authentication-Scheme Section + in the AAA ...............................................66 + 13.7. Creation of the SIP-Reason-Code Section in the + AAA Registry .............................................66 + 13.8. Creation of the SIP-User-Authorization-Type + Section in the AAA .......................................66 + 13.9. Creation of the SIP-User-Data-Already-Available + Section in the ...........................................66 + 14. Security Considerations .......................................67 + 14.1. Final Authentication Check in the Diameter + Client/SIP Server ........................................67 + 15. Contributors ..................................................68 + 16. Acknowledgements ..............................................68 + 17. References ....................................................68 + 17.1. Normative References .....................................68 + 17.2. Informative References ...................................69 + + + + + + +Garcia-Martin, et al. Standards Track [Page 3] + +RFC 4740 Diameter SIP Application November 2006 + + +1. Introduction + + This document specifies the Diameter Session Initiation Protocol + (SIP) application. This is a Diameter application that allows a + Diameter client to request authentication and authorization + information to a Diameter server for SIP-based IP multimedia services + (see [RFC3261] about SIP). Furthermore, this Diameter SIP + application provides the Diameter client with functions that go + beyond the typical authorization and authentication, such as the + ability to download or receive updated user profiles, or rudimentary + routing functions that can assist a SIP server in finding another SIP + server allocated to the user. + + We assume that the SIP server (such as SIP proxy server, registrar, + redirect server, or alike) and the Diameter client are co-located in + the same node, so that the SIP server is able to receive and process + SIP requests and responses. In turn, the SIP server relies on the + Authentication, Authorization, and Accounting (AAA) infrastructure + for authenticating the SIP request and authorizing the usage of + particular SIP services. + + This document provides Diameter procedures to implement certain + required functionality when SIP is the protocol chosen to initiate + and tear down multimedia sessions or when SIP is used for other + non-session-related applications. However, this document does not + mandate any particular mapping of SIP procedures to Diameter SIP + application procedures, nor does it mandate any particular sequence + of events between SIP and Diameter. This document provides useful + examples to show the interaction between SIP and the Diameter SIP + application in order to achieve the desired functionality. + + This application does not require and is not related to other + authentication services provided by the Diameter Mobile IPv4 + [RFC4004] or the Diameter Network Access Server [RFC4005] + applications. + + This Diameter SIP application is loosely related to the Diameter + credit-control application [RFC4006]. Although both applications are + independent, the Diameter SIP application is able to supply the + addresses of credit-control servers that will be implementing the + Diameter credit-control application [RFC4006]. + + Section 5 discusses assumptions and configurations assumed by this + document. + + Section 6 provides the reader with informative descriptions of the + Diameter SIP application commands and responses and with some + guidance about their linkage with SIP procedures. + + + +Garcia-Martin, et al. Standards Track [Page 4] + +RFC 4740 Diameter SIP Application November 2006 + + + Advertisement of this application is specified in Section 7. + + Section 8 provides a normative description of all the new Diameter + commands defined by this specification. + + This application extends the Result-Code Attribute-Value-Pair (AVP) + with some new values. Further information is described in + Section 10. + + This application defines some new AVPs. All these AVPs are described + in Section 9. + + Some extra information about authentication is provided in + Section 11. + +2. Terminology + + In this document, the key words "MUST", "MUST NOT", "REQUIRED", + "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT + RECOMMENDED", "MAY", and "OPTIONAL" are to be interpreted as + described in BCP 14, RFC 2119 [RFC2119] and indicate requirement + levels for compliant implementations. + +3. Definitions + + For the purpose of this document, the following terms and definitions + apply: + + Node: an addressable device attached to a computer network that + implements SIP functionality, Diameter functionality, or a + combination of both. + + For the purpose of this document, the following terms and definitions + given in RFC 3261 [RFC3261] Section 6, apply: + + o Address-of-Record (AOR) + o Outbound proxy + o Proxy + o Registrar + o Server (SIP server) + o User Agent (UA) + o User Agent Client (UAC) + o User Agent Server (UAS) + + For the purpose of this document, the following terms and definitions + given in RFC 3588 [RFC3588] Section 1.3, apply: + + + + + +Garcia-Martin, et al. Standards Track [Page 5] + +RFC 4740 Diameter SIP Application November 2006 + + + o Authorization + o Authentication + o Attribute-Value Pair (AVP) + o Diameter Client + o Diameter Server + o Home Realm + o Redirect Agent + o User + +4. Acronyms + + AKA: Authentication and Key Agreement + LIR: Location-Info-Request + LIA: Location-Info-Answer + MAR: Multimedia-Auth-Request + MAA: Multimedia-Auth-Answer + PPR: Push-Profile-Request + PPA: Push-Profile-Answer + RTR: Registration-Termination-Request + RTA: Registration-Termination-Answer + SAR: Server-Assignment-Request + SAA: Server-Assignment-Answer + SL: Subscriber Locator + UAR: User-Authorization-Request + UAA: User-Authorization-Answer + +5. Applicability Statement + + This document assumes a general architecture where a Home Realm is + composed of one or more nodes implementing Diameter or SIP functions. + Users are issuing SIP requests to access SIP resources. For each + particular user, the Home Realm needs to authenticate and authorize + the usage of those resources and/or the route to the appropriate + node. We assume that the database containing the user-related data + is located outside the SIP node that requires authorization. Data + belonging to different users may be stored in different nodes in the + Home Realm, but we assume that all the data related to a particular + user is stored in a single node. + + Note: Central to the architecture is the fact that the user data + is stored in a single point in the network. This restriction does + not mandate a particular implementation, e.g., it is possible to + implement clusters of databases operating in mirror mode to + provide redundancy. The property required by this specification + is that the user data the Diameter server has access to is stored + safely in what is seen, from the external point of view, as a + single user database. + + + + +Garcia-Martin, et al. Standards Track [Page 6] + +RFC 4740 Diameter SIP Application November 2006 + + + This document allows several configurations of the Home Realm. In + one configuration, a SIP server (proxy, registrar, etc.) is allocated + to a user for the purpose of triggering and executing services. The + allocation of the SIP server may be done dynamically, e.g., at the + time the user registers in the network. This configuration requires + a SIP server, typically located at the edge of the network, that is + able to allocate another SIP server for the user and that also + supports routing of SIP requests and responses towards that allocated + SIP server. Both SIP server nodes implement a Diameter client. + + In another configuration, the address of a SIP outbound proxy is + configured (by means outside the scope of this specification) into + the SIP User Agent. The outbound Diameter client in the SIP outbound + proxy node authenticates the user, requests authorization for SIP + requests, and performs accounting activities. + +6. Overview of Operation + + This section provides an informative description of how the Diameter + SIP application can be used together with SIP. This section is not + intended to mandate any specific usage of the Diameter SIP + application nor does it mandate a specific mapping between SIP and + Diameter messages. We provide a collection of examples that show how + the required AAA functionality can be achieved in conjunction with + SIP. + +6.1. General Architecture + + The Diameter SIP application can be used in a SIP environment where + an interface to a AAA infrastructure is required to authenticate and + authorize the usage of SIP resources. This application provides + support for SIP User Agents and proxies that implement and use HTTP + Digest authentication [RFC2617], which is the authentication + mechanism mandated by SIP [RFC3261]. The application is extensible + and, if need arises, it can be extended to provide support for other + authentication mechanisms or extensions to HTTP Digest authentication + when they occur. + + This application provides limited support for accounting services as + follows: the Diameter server is able to provide the addresses of + accounting severs to the Diameter client. Figure 1, below, shows a + general overview of the integration of the SIP architecture with the + AAA architecture. + + According to Figure 1, there are one or more SIP User Agents (UAs) + that initiate or terminate SIP traffic through one or more SIP + servers. Both SIP servers implement a Diameter client that supports + the Diameter application described in this specification. + + + +Garcia-Martin, et al. Standards Track [Page 7] + +RFC 4740 Diameter SIP Application November 2006 + + + +--------+ + UAR/UAA +--->|Diameter|<----+ PPR/PPA + LIR/LIA | | server | | MAR/MAA + | +--------+ | SAR/SAA + | | RTR/RTA + | | + v v + +------+ SIP +--------+ SIP +--------+ SIP +------+ + | SIP |<--------->| SIP |<-------->| SIP |<--------->| SIP | + | UA | |server 1| |server 2| | UA | + +------+ +--------+ +--------+ +------+ + ^ ^ + UAR/UAA | | + LIR/LIA | | MAR/MAA + | +--------+ | SAR/SAA + +--->|Diameter|<----+ + | SL | + +--------+ + + Figure 1: Architecture of the Diameter application for SIP + + In Figure 1, it can be seen that SIP server 1 sends different + Diameter commands and receives different responses than those sent + and received by SIP server 2. This is because SIP server 1 in + Figure 1 is located at the edge of a network, and its main task is to + locate SIP server 2. SIP server 2 is requesting and receiving + authentication and authorization data from the Diameter server and is + not located at the edge of the network. + + This Diameter application assumes that all the data pertaining to a + given user is stored in a single Diameter server. For redundancy + purposes, several Diameter servers can be configured in a redundancy + fashion, in which case all of them keep the data synchronized and + operate externally as a single Diameter server. + + With respect to SIP server 1 in Figure 1, the Diameter SIP + application provides support for the existence of a farm of these + servers, typically configured through one or more DNS records that + point to several hosts (this is a typical configuration in common SIP + deployments). There is no requirement for these types of servers to + keep state related to the Diameter SIP application. + + The Diameter SIP application provides support for a feature that + allows an administrative domain to provide a collection of SIP + servers 2 (as per Figure 1). Once the user registers for the first + time, one of these SIP servers is selected and all the SIP requests + related to the user are processed by the same SIP server. + + + + +Garcia-Martin, et al. Standards Track [Page 8] + +RFC 4740 Diameter SIP Application November 2006 + + + The Diameter Subscriber Locator (SL) serves the purpose of locating + the Diameter server that contains the user-related data. Its + functionality is based on the Diameter redirect mechanism and is + further described in Section 6.8. + + It should be noted that this document does not mandate any particular + SIP/AAA architecture. However, the Diameter SIP application provides + the functionality needed to accommodate all the different + architectures where SIP and Diameter are used. + + The following subsections provide an informative overview of the + Diameter SIP application, its commands, and a possible interaction + with SIP signaling. + +6.2. Diameter Server Authenticates the User + + This is the generic mechanism to authenticate users. In this + approach, we show an example of an administrative network where the + Diameter server is authenticating SIP user requests. This could be + the case of a medium-size network where the Diameter server is + keeping user records and authenticating SIP requests to perform a + certain transaction. We have chosen to show a SIP REGISTER request + in the example, but the SIP server could request authentication of + any other SIP request. + + + + + + + + + + + + + + + + + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 9] + +RFC 4740 Diameter SIP Application November 2006 + + + +--------+ +--------+ +--------+ + | SIP | |Diameter| | SIP | + |server 1| | server | |server 2| + +--------+ +--------+ +--------+ + | | | + 1. SIP REGISTER | | | + -------------------->| 2. UAR | | + |------------------>| | + | 3. UAA | | + |<------------------| | + | 4. SIP REGISTER | + |-------------------------------------->| + | | 5. MAR | + | |<------------------| + | | 6. MAA | + | |------------------>| + | 7. SIP 401 (Unauthorized) | + 8. SIP 401 (Unauth.) |<--------------------------------------| + <--------------------| | | + 9. SIP REGISTER | | | + -------------------->| 10. UAR | | + |------------------>| | + | 11. UAA | | + |<------------------| | + | 12. SIP REGISTER | + |-------------------------------------->| + | | 13. MAR | + | |<------------------| + | | 14. MAA | + | |------------------>| + | 15. SIP 200 (OK) | + 16. SIP 200 (OK) |<--------------------------------------| + <--------------------| | | + | | 17. SAR | + | |<------------------| + | | 18. SAA | + | |------------------>| + | | | + + Figure 2: Authentication performed in the Diameter server + + According to Figure 2, a SIP User Agent Client (UAC) sends a SIP + REGISTER request (step 1) to SIP server 1, which receives the SIP + request. In Figure 2, we assume that this SIP server is located at + the edge of the administrative home domain. The Diameter client in + SIP server 1 contacts its Diameter server by sending a Diameter + User-Authorization-Request (UAR) message (step 2) to determine if + this user is allowed to receive service, and if so, request the + + + +Garcia-Martin, et al. Standards Track [Page 10] + +RFC 4740 Diameter SIP Application November 2006 + + + address of a local SIP server capable of handling this user. The + Diameter server answers with a Diameter User-Authorization-Answer + (UAA) message (step 3), which indicates a list of capabilities that + SIP server 1 may use to select an appropriate SIP server (SIP server + 2) and/or a SIP or SIPS URI pointing to SIP server 2. + + SIP server 1 forwards the SIP REGISTER request (step 4) to an + appropriate SIP server (SIP server 2). Then the Diameter client in + SIP server 2 requests user authentication from the Diameter server by + sending a Diameter Multimedia-Auth-Request (MAR) message (step 5). + This request also serves to make the Diameter server aware of the SIP + or SIPS URI of SIP server 2, so as to return subsequent requests for + the same user to the same SIP server 2. The Diameter server responds + with a Diameter Multimedia-Auth-Answer (MAA) message (step 6) with + Result-Code AVP set to the value DIAMETER_MULTI_ROUND_AUTH. The + Diameter server also generates a nonce and includes a challenge in + the MAA message. SIP server 2 uses that challenge to map into the + WWW-Authenticate header in the SIP 401 (Unauthorized) response (step + 7), which is sent back to SIP server 1 and then to the SIP UAC (step + 8). + + SIP server 1 receives a next SIP REGISTER request containing the user + credentials (step 9). Note that SIP server 1 does not need to keep a + state, and even more, there is no guarantee that the SIP request + arrives at the same SIP server 1; there could be a farm of SIP + servers 1 operating in redundant configuration. The Diameter client + in SIP server 1 contacts the Diameter server by sending a Diameter + UAR message (step 10) to determine the SIP server allocated to the + user. The Diameter server sends the SIP or SIPS URI of SIP server 2 + in a Diameter UAA message (step 11). + + Then SIP server 1 forwards the SIP REGISTER request to SIP server 2 + (step 12). SIP server 2 extracts the credentials from the SIP + REGISTER request. The Diameter client in SIP server 2 sends those + credentials in a Diameter MAR message (step 13) to the Diameter + server. At this point, the Diameter server is able to authenticate + the user, and upon success, returns a Diameter MAA message (step 14) + with the AVP Result-Code set to the value DIAMETER_SUCCESS. + + Then SIP server 2 generates a SIP 200 (OK) response (step 15), which + is forwarded to SIP server 1 and eventually to the SIP UAC (step 16). + + If the Diameter client in SIP server 2 is interested in downloading + the user profile information or is required to store the address of + the SIP server in the Diameter server, then the Diameter client sends + a Diameter SAR message (step 17) to the Diameter server. The + Diameter server replies with a Diameter SAA message (step 18) that + contains the requested user profile information and the + + + +Garcia-Martin, et al. Standards Track [Page 11] + +RFC 4740 Diameter SIP Application November 2006 + + + acknowledgement of the SIP server address storage. These actions are + needed when the SIP server has to retrieve a user profile used to + provide services to the served user, or when the SIP server keeps a + state for the user, so the Diameter server needs to store the SIP + server's address. + +6.3. Delegating Final Authentication Check to the SIP Server + + An operator with a large base of installed SIP servers may wish to + minimize the number of round-trips between the Diameter client and + the Diameter server. We provide support for a mechanism where the + Diameter server delegates the final authentication check to the SIP + server, thereby saving a round-trip. Section 14.1 discusses the + security considerations of this scenario. + + It must noted that this scenario is not applicable when the Diameter + server is configured to use a session MD5 (MD5-sess) algorithm, + because the Diameter server requires the client nonce to compute the + H(A1) before sending it to the Diameter client. However, the client + nonce might not be available at that time. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 12] + +RFC 4740 Diameter SIP Application November 2006 + + + +--------+ +--------+ +--------+ + | SIP | |Diameter| | SIP | + |server 1| | server | |server 2| + +--------+ +--------+ +--------+ + | | | + 1. SIP REGISTER | | | + -------------------->| 2. UAR | | + |------------------>| | + | 3. UAA | | + |<------------------| | + | 4. SIP REGISTER | + |-------------------------------------->| + | | 5. MAR | + | |<------------------| + | | 6. MAA | + | |------------------>| + | 7. SIP 401 (Unauthorized) | + 8. SIP 401 (Unauth.) |<--------------------------------------| + <--------------------| | | + 9. SIP REGISTER | | | + -------------------->| 10. UAR | | + |------------------>| | + | 11. UAA | | + |<------------------| | + | 12. SIP REGISTER | + |-------------------------------------->| + | | 13. SAR | + | |<------------------| + | | 14. SAA | + | |------------------>| + | 15. SIP 200 (OK) | + 16. SIP 200 (OK) |<--------------------------------------| + <--------------------| | | + | | | + + Figure 3: Delegation of authentication to the SIP server + + Figure 3 shows an example where a SIP server is dynamically allocated + to serve a SIP User Agent with the support of the Diameter server. + This may be the case of certain architectures, such as that of the + 3rd Generation Partnership Project (3GPP) IP Multimedia Core Network + Subsystem. + + A first SIP server receives a SIP REGISTER request (step 1) whose + target is the home network domain. In Figure 3, we assume that this + SIP server is located at the edge of the administrative home domain. + The Diameter client in this SIP server requests authorization from + the Diameter server to proceed with the registration, by sending a + + + +Garcia-Martin, et al. Standards Track [Page 13] + +RFC 4740 Diameter SIP Application November 2006 + + + Diameter User-Authorization-Request (UAR) message (step 2). The + message includes, among other Attribute-Value-Pairs (AVPs), the SIP + Address-Of-Record (AOR) that is included in the SIP REGISTER request. + The Diameter server verifies the SIP AOR and, if it is a valid + defined user in the home network, authorizes the registration to + proceed. The Diameter server responds with a Diameter + User-Authorization-Answer (UAA) message (step 3), which informs the + Diameter client/SIP server about the result of the user + authorization. In case of a successful authorization, the Diameter + UAA message indicates the address of a local SIP server (SIP server 2 + in Figure 3) and/or a list of capabilities that SIP server 1 may use + to select an appropriate SIP server 2. + + When the authorization is successful, SIP server 1 forwards the SIP + REGISTER request (step 4) to the appropriate SIP server (SIP server + 2). The Diameter client in SIP server 2 requests authentication + parameters by sending a Diameter Multimedia-Auth-Request (MAR) + message (step 5) to the Diameter server. This request also makes the + Diameter server aware of the SIP or SIPS URI of SIP server 2, so as + to return subsequent requests of the same user to the same SIP server + 2. The Diameter server responds with a Diameter + Multimedia-Auth-Answer (MAA) message (step 6), which includes a nonce + and all the rest of the parameters necessary for the designated + authentication algorithm associated with the user. Among others, the + MAA message includes a Digest-HA1 AVP that contains H(A1) (as defined + in RFC 2617 [RFC2617]), and that allows the Diameter client to + calculate the expected response. Then the Diameter client can + compare this expected response with the response to the challenge + sent from the SIP UA. The absence of the Digest-HA1 AVP in MAA + indicates that authentication and authorization take place in the + Diameter server, as per the scenario described in Section 6.2. + + SIP server 2 creates a SIP 401 (Unauthorized) SIP response (step 7) + based on the challenge included in the MAA message, including the + authentication material needed by the SIP User Agent Client (UAC) to + include the appropriate credentials. SIP server 1 forwards the SIP + response to the SIP UAC (step 8). + + The SIP server 1 receives the next SIP REGISTER request containing + the user credentials (step 9). Because SIP server 1 does not need to + keep a state (and there is no guarantee that the SIP request arrives + to the same SIP server 1), the Diameter client in SIP server 1 + contacts the Diameter server again by sending a Diameter UAR message + (step 10) to determine the SIP server allocated to the user. The + Diameter server sends the SIP or SIPS URI of SIP server 2 in a + Diameter UAA message (step 11). + + + + + +Garcia-Martin, et al. Standards Track [Page 14] + +RFC 4740 Diameter SIP Application November 2006 + + + SIP server 1 forwards the SIP REGISTER request to SIP server 2 (step + 12). SIP server 2 validates the credentials by comparing the + response supplied by the SIP UA with the expected response calculated + by the SIP server 2 (based on the H(A1) received from the Diameter + server). + + If the credentials are valid, SIP server 2 sends a Diameter + Server-Assignment-Request (SAR) message (step 13) requesting the + Diameter server to confirm the completion of the authentication + procedure and to confirm the SIP or SIPS URI of the SIP server that + is currently serving the user. The Diameter SAR message also serves + the purpose of requesting that the Diameter server send the user + profile to the SIP server. The Diameter server responds with a + Diameter Server-Assignment-Answer (SAA) message (step 14). If the + Result-Code AVP value does not inform SIP Server 2 of an error, the + SAA message can include zero or more SIP-User-Data AVPs containing + the information that SIP server 2 needs in order to provide a service + to the user. + + SIP server 2 generates a SIP 200 (OK) response (step 15), which is + forwarded to SIP server 1 and eventually to the SIP UAC (step 16). + +6.4. SIP Server Requests Authentication and Authorization + + Figure 4 depicts a typical scenario where a stateless SIP proxy + requests authentication information and authorization to a Diameter + server, for the purpose of providing SIP routing services to a SIP + User Agent. The SIP proxy server may be configured as an outbound + SIP proxy, so that all the requests initiated by the SIP UA traverse + the SIP proxy. + + According to Figure 4, a SIP User Agent sends a SIP request to its + outbound SIP proxy server. In this case, the message is a SIP INVITE + request (see step 1), but it could be any other SIP request. We + assume that this SIP request does not contain any credentials at this + time. The outbound SIP proxy server needs to authenticate and + authorize the proxy services offered to the user. The Diameter + client in the SIP server sends a Multimedia-Auth-Request (MAR) + message (step 2). The Diameter server generates a nonce and sends a + Multimedia-Auth-Answer (MAA) message (step 3) that includes the nonce + and the rest of the data necessary for the SIP server to challenge + the user, typically with HTTP Digest Authentication indicated in the + MAA message. This data enables the SIP server to create a SIP 407 + (Proxy Authentication Required) response (step 4) that contains a + challenge. The SIP UA creates a new INVITE request (step 5) that + contains the credentials. The Diameter client in the SIP server + sends the credentials to the Diameter server in a new Diameter MAR + message (step 6). The Diameter server validates the credentials and + + + +Garcia-Martin, et al. Standards Track [Page 15] + +RFC 4740 Diameter SIP Application November 2006 + + + authorize the SIP transaction in a Diameter MAA message (step 7). + The SIP server forwards the SIP INVITE request to its destination + (step 8) as per regular SIP procedures. Eventually, the session + setup is confirmed with a SIP 200 (OK) response (step 9) that is + forwarded to the SIP UA (step 10). The session setup is complete. + + +--------+ +--------+ + |Diameter| | SIP | + | server | | server | + +--------+ +--------+ + | | + | | + 1. SIP INVITE | + ----------------------------------->| + | 2. MAR | + |<------------------| + | 3. MAA | + |------------------>| + | | + 4. SIP 407 (Proxy | + Authentication Required) | + <-----------------------------------| + | | + 5. SIP INVITE | + ----------------------------------->| + | 6. MAR | + |<------------------| + | 7. MAA | + |------------------>| 8. SIP INVITE + | |----------------> + | | 9. SIP 200 (OK) + 10. SIP 200 (OK) |<---------------- + <-----------------------------------| + | | + + Figure 4: SIP server requests authorization + +6.5. Locating the Recipient of the SIP Request + + Figure 5 shows the scenario where SIP server 1 may be configured as a + SIP edge proxy server, processing SIP traffic at the edge of a + network. SIP server 1 receives a SIP INVITE request (step 1). SIP + server 1 needs to find the address of SIP server 2, which is serving + the recipient of the SIP request. The Diameter client in SIP server + 1 sends a Diameter Location-Info-Request (LIR) message (step 2) to + the Diameter server. The Diameter server responds with a Diameter + Location-Info-Answer (LIA) message (step 3) that contains the SIP or + + + + +Garcia-Martin, et al. Standards Track [Page 16] + +RFC 4740 Diameter SIP Application November 2006 + + + SIPS URI of SIP server 2. SIP server 1 then forwards the SIP INVITE + to SIP server 2 (step 4). SIP server 2 eventually forwards the SIP + INVITE to the appropriate UAS (step 5). + + +--------+ +--------+ +--------+ + | SIP | |Diameter| | SIP | + |server 1| | server | |server 2| + +--------+ +--------+ +--------+ + | | | + 1. SIP INVITE | | | + -------------->| 2. LIR | | + |---------------->| | + | 3. LIA | | + |<----------------| | + | 4. SIP INVITE | + |--------------------------------->| + | | | 5. SIP INVITE + | | |--------------> + | | | + | | | + + Figure 5: Locating the SIP server of the recipient + + Although the example shows the connection between a SIP INVITE + request and the Diameter LIR message, any SIP request other than + REGISTER (such as SUBSCRIBE, OPTIONS, etc.) would trigger the same + Diameter message. (A SIP REGISTER request will trigger a Diameter + UAR message, as indicated in Figure 2 and Figure 3.) + + The scenario described in this section is also applicable in case an + outbound SIP server is not interested in authenticating the user, but + is required to locate a further SIP server to route the outbound SIP + requests. In this case, the outbound SIP server is mapped to SIP + server 1 as shown in Figure 5. + +6.6. Update of the User Profile + + The Diameter SIP application provides a mechanism for a Diameter + server to asynchronously download a user profile to a SIP server + whenever there is an update of such user profile. It must be noted + that the Diameter server also attaches the user profile to the + Diameter Server-Assignment-Answer (SAA) message. This is valid for + most of the daily situations; however, the administrator may decide + to update or modify the user profile for a particular user, due to, + e.g., new services made available to the user. This may involve + mechanisms outside the scope of this specification, such as human + + + + + +Garcia-Martin, et al. Standards Track [Page 17] + +RFC 4740 Diameter SIP Application November 2006 + + + intervention, in the Diameter server. In this situation, the + Diameter server is able to push the new user profile into the SIP + server allocated to the user. + + The scenario is illustrated in Figure 6. When the user profile + changes, the Diameter server sends a Diameter Push-Profile-Request + (PPR) message (step 1) to the Diameter client in the SIP server + allocated to that user (SIP server 2 in the examples). The Diameter + PPR message contains one or more SIP-User-Data AVPs, a User-Name AVP + and zero or more SIP-AOR AVPs. The Diameter client in SIP server 2 + acknowledges the Diameter PPR message by sending a Diameter + Push-Profile-Answer (PPA) message (step 2) to the Diameter server. + + +--------+ +--------+ + |Diameter| | SIP | + | server | |server 2| + +--------+ +--------+ + | | + | 1. PPR | + |------------------>| + | | + | 2. PPA | + |<------------------| + | | + + Figure 6: Diameter server pushes an update of the user profile + +6.7. SIP Soft State Termination + + SIP can create soft states in SIP nodes based on events such as SIP + registrations or SIP event subscriptions. These states are + periodically refreshed, and cease to exist if they are not refreshed. + Additionally, an administrative action can be taken to terminate a + SIP soft state, or the SIP UA can explicitly terminate a SIP soft + state. + + The Diameter base protocol offers a mechanism to create and delete + states in Diameter nodes. These states are called Diameter user + sessions. The Diameter server decides whether to use a Diameter user + session as a mechanism to map to a SIP soft state. If the Diameter + server decides to use Diameter user sessions, the termination of a + Diameter user session implies the termination of the corresponding + SIP soft state (e.g., registration, event subscription), and vice + versa. If the Diameter server does not use Diameter user sessions, + this Diameter SIP application offers specific commands to manage the + SIP soft states. Implementations compliant with this specification + MUST support both mechanisms of session management. + + + + +Garcia-Martin, et al. Standards Track [Page 18] + +RFC 4740 Diameter SIP Application November 2006 + + + We provide support for both Diameter client- and Diameter + server-initiated session termination. Depending on whether Diameter + sessions are used, termination of a SIP soft state can be achieved by + one of the following methods: + + o When the Diameter client (SIP proxy) wants to terminate the SIP + soft state and Diameter user sessions are not maintained (i.e., + the Auth-Session-State AVP has been previously set to + NO_STATE_MAINTAINED), the Diameter client MUST send a + Server-Assignment-Request (SAR) message with the + SIP-Server-Assignment-Type AVP (Section 9.4) set to any of the + deregistration values: TIMEOUT_DEREGISTRATION, + USER_DEREGISTRATION, TIMEOUT_DEREGISTRATION_STORE_SERVER_NAME, + USER_DEREGISTRATION_STORE_SERVER_NAME, + ADMINISTRATIVE_DEREGISTRATION, DEREGISTRATION_TOO_MUCH_DATA. + + o When the Diameter client (SIP proxy) wants to terminate the SIP + soft state and Diameter user sessions are maintained (i.e., the + Auth-Session-State AVP has been previously set to + STATE_MAINTAINED), the Diameter client MUST send a Session- + Termination-Request (STR) message as per regular procedures + according to RFC 3588 [RFC3588]. + + o When the Diameter server wants to terminate the SIP soft state and + Diameter user sessions are not maintained (i.e., the + Auth-Session-State AVP has been previously set to + NO_STATE_MAINTAINED), the Diameter server MUST send a + Registration-Termination-Request (RTR) message (see Section 8.9). + + o When the Diameter server wants to terminate the SIP soft state and + Diameter user sessions are maintained (i.e., the + Auth-Session-State AVP has been previously set to + STATE_MAINTAINED), the Diameter server MUST send an + Abort-Session-Request (ASR) message as per regular procedures + according to RFC 3588 [RFC3588]. + +6.8. Diameter Server Discovery + + The basic architecture assumption of this document is that all the + data related to a user is stored in a unique Diameter server. + Contrary to general opinion, this does not create a single point of + failure. It is assumed that Diameter servers are configured in a + redundant fashion in an attempt to mitigate the + single-point-of-failure problem. + + In large networks, where the number of users may be significantly + high, there might be a need to scale the number of Diameter servers. + All the data associated with a user is still stored in one Diameter + + + +Garcia-Martin, et al. Standards Track [Page 19] + +RFC 4740 Diameter SIP Application November 2006 + + + server (typically, operating in a redundant configuration), but the + data associated with different users may reside in different Diameter + servers. + + Although this configuration scales well, it introduces a new problem, + namely: given the user's SIP AOR as an input, how to determine which + of various Diameter servers is storing the data for that particular + SIP AOR. We solve this problem with inspiration from the Diameter + redirection mechanism specified in RFC 3588 [RFC3588]. We include in + the architecture a new Diameter node that, for the purpose of this + document, is known as Diameter Subscriber Locator (SL). The Diameter + SL contains a database or routing tables that map SIP AORs to + Diameter server URIs. A particular Diameter server URI points to the + actual Diameter server that stores all the data related to a + particular SIP AOR, and in consequence, to the user who owns the SIP + AOR. The Diameter SL acts in a similar way to a Diameter Redirect + Agent, dispatching Diameter requests (e.g., providing the redirection + URI in the answer). The Diameter SL can redirect all the request + pertaining to a user by setting the Redirect-Host-Usage AVP with a + value ALL_USER, as specified in RFC 3588 [RFC3588]. + + The Diameter SL can be replicated in different nodes along the + network, for the purpose of building scalability and redundancy. The + database or routing tables have to be consistent across all these + different Diameter SLs, so that equal Diameter requests will produce + equal Diameter answers, no matter which Diameter SL processes the + request. + + +--------+ +--------+ +--------+ +--------+ + | SIP | |Diameter| |Diameter| | SIP | + |server 1| |SL red. | |server 1| |server 2| + +--------+ +--------+ +--------+ +--------+ + | | | | + 1. SIP INVITE| | | | + ------------>| 2. LIR | | | + |---------->| | | + | 3. LIA | | | + |<----------| | | + | 4. LIR | | + |---------------------->| | + | 5. LIA | | + |<----------------------| | + | 6. SIP INVITE | | + |----------------------------------->| 7. SIP INVITE + | | | | -------------> + | | | | + + Figure 7: Locating a Diameter server. SL redirecting requests + + + +Garcia-Martin, et al. Standards Track [Page 20] + +RFC 4740 Diameter SIP Application November 2006 + + + Figure 7 shows an example of operation of a Diameter SL acting in + redirect mode. SIP server 1 receives an INVITE request (step 1) + addressed (in the SIP Request-URI) to a user for which the Diameter + client in SIP server 1 does not possess routing information. In + other words, the Diameter client in SIP server 1 does not know the + URI of the Diameter server 1. The Diameter client sends a Diameter + LIR message (step 2) to any of the Diameter SLs configured in the + network. The address of those SLs is assumed to be pre-provisioned + in the Diameter client. The Diameter SL, based on the contents of + the SIP-AOR AVP and its own routing tables, determines the Diameter + server that stores the information allocated to such user. Then it + builds a Diameter LIA message (step 3) that includes a Result-Code + AVP set to DIAMETER_REDIRECT_INDICATION and one Redirect-Host AVP, + whose value is set to the URI of the Diameter server that stores the + information related to such user. Then the Diameter client in SIP + server 1 builds a new LIR message (step 4) addressed to the Diameter + server received in the Redirect-Host AVP. The rest of the procedure + is completed as described in previous sections. + +7. Advertising Application Support + + Diameter implementations conforming to this specification MUST + advertise its support by including an Auth-Application-Id AVP in the + Capabilities-Exchange-Request (CER) and Capabilities-Exchange-Answer + (CEA) commands, according to the Diameter base protocol, RFC 3588 + [RFC3588]. This Auth-Application-Id AVP MUST be set to the value of + this Diameter SIP application (Section 13.1 indicates the actual + value allocated by IANA). + + + + + + + + + + + + + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 21] + +RFC 4740 Diameter SIP Application November 2006 + + +8. Diameter SIP Application Command Codes + + All the Diameter implementations conforming to this specification + MUST implement and support the list of Diameter commands listed in + Table 1. + + +-------------------------------------+-------+------+--------------+ + | Command Name | Abbr. | Code | Reference | + +-------------------------------------+-------+------+--------------+ + | User-Authorization-Request | UAR | 283 | Section 8.1 | + | User-Authorization-Answer | UAA | 283 | Section 8.2 | + | Server-Assignment-Request | SAR | 284 | Section 8.3 | + | Server-Assignment-Answer | SAA | 284 | Section 8.4 | + | Location-Info-Request | LIR | 285 | Section 8.5 | + | Location-Info-Answer | LIA | 285 | Section 8.6 | + | Multimedia-Auth-Request | MAR | 286 | Section 8.7 | + | Multimedia-Auth-Answer | MAA | 286 | Section 8.8 | + | Registration-Termination-Request | RTR | 287 | Section 8.9 | + | Registration-Termination-Answer | RTA | 287 | Section 8.10 | + | Push-Profile-Request | PPR | 288 | Section 8.11 | + | Push-Profile-Answer | PPA | 288 | Section 8.12 | + +-------------------------------------+-------+------+--------------+ + + Table 1: Defined command codes + + Sections defining commands contain the Message Format for that + particular command. The Message Formats included in this document + are defined as per Section 3.2 of RFC 3588 [RFC3588]. + +8.1. User-Authorization-Request (UAR) Command + + The User-Authorization-Request (UAR) is indicated by the Command-Code + set to 283 and the Command Flags' 'R' bit set. The Diameter client + in a SIP server sends this command to the Diameter server to request + authorization for the SIP User Agent to route a SIP REGISTER request. + Because the SIP REGISTER request implicitly carries a permission to + bind an AOR to a contact address, the Diameter client uses the + Diameter UAR as a first authorization request towards the Diameter + server to authorize the registration. For instance, the Diameter + server can verify that the AOR is a legitimate user of the realm. + + The Diameter client in the SIP server requests authorization for one + of the possible values defined in the SIP-User-Authorization-Type AVP + (Section 9.10). + + The user name used for authentication of the user is conveyed in a + User-Name AVP (defined in the Diameter base protocol, RFC 3588 + [RFC3588]). The location of the authentication user name in the SIP + + + +Garcia-Martin, et al. Standards Track [Page 22] + +RFC 4740 Diameter SIP Application November 2006 + + + REGISTER request varies depending on the authentication mechanism. + When the authentication mechanism is HTTP Digest as defined in RFC + 2617 [RFC2617], the authentication user name is found in the + "username" directive of the SIP Authorization header field value. + This Diameter SIP application only provides support for HTTP Digest + authentication in SIP; other authentication mechanisms are not + currently supported. + + The SIP or SIPS URI to be registered is conveyed in the SIP-AOR AVP + (Section 9.8). Typically this SIP or SIPS URI is found in the To + header field value of the SIP REGISTER request that triggered the + Diameter UAR message. + + The SIP-Visited-Network-Id AVP indicates the network that is + providing SIP services (e.g., SIP proxy functionality or any other + kind of services) to the SIP User Agent. + + The Message Format of the UAR command is as follows: + + <UAR> ::= < Diameter Header: 283, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { SIP-AOR } + [ Destination-Host ] + [ User-Name ] + [ SIP-Visited-Network-Id ] + [ SIP-User-Authorization-Type ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.2. User-Authorization-Answer (UAA) Command + + The User-Authorization-Answer (UAA) is indicated by the Command-Code + set to 283 and the Command Flags' 'R' bit cleared. The Diameter + server sends this command in response to a previously received + Diameter User-Authorization-Request (UAR) command. The Diameter + server indicates the result of the requested registration + authorization. Additionally, the Diameter server may indicate a + collection of SIP capabilities that assists the Diameter client to + select a SIP proxy to the AOR under registration. + + + + + + +Garcia-Martin, et al. Standards Track [Page 23] + +RFC 4740 Diameter SIP Application November 2006 + + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + Whenever the Diameter server fails to process the Diameter UAR + message, it MUST stop processing and return the relevant error in the + Diameter UAA message. When there is success in the process, the + Diameter server MUST set the code to DIAMETER_SUCCESS in the Diameter + UAA message. + + If the Diameter server requires a User-Name AVP value to process the + Diameter UAR request, but the Diameter UAR message did not contain a + User-Name AVP value, the Diameter server MUST set the Result-Code AVP + value to DIAMETER_USER_NAME_REQUIRED (see Section 10.1.2) and return + it in a Diameter UAA message. Upon reception of this Diameter UAA + message with the Result-Code AVP value set to + DIAMETER_USER_NAME_REQUIRED, the SIP server typically requests + authentication by sending a SIP 401 (Unauthorized) or SIP 407 (Proxy + Authentication Required) response back to the originator. + + When the authorization procedure succeeds, the Diameter server + constructs a User-Authorization-Answer (UAA) message that MUST + include (1) the address of the SIP server already assigned to the + user name, (2) the capabilities needed by the SIP server (Diameter + client) to select another SIP server for the user, or (3) a + combination of the previous two options. + + If the Diameter server is already aware of a SIP server allocated to + the user, the Diameter UAA message contains the address of that SIP + server. + + The Diameter UAA message contains the capabilities required by a SIP + server to trigger and execute services. It is required that these + capabilities are present in the Diameter UAA message due to the + possibility that the Diameter client (in the SIP server) allocates a + different SIP server to trigger and execute services for that + particular user. + + If a User-Name AVP is present in the Diameter UAR message, then the + Diameter server MUST verify the existence of the user in the realm, + i.e., the User-Name AVP value is a valid user within that realm. If + the Diameter server does not recognize the user name received in the + User-Name AVP, the Diameter server MUST build a Diameter User- + Authorization-Answer (UAA) message and MUST set the Result-Code AVP + to DIAMETER_ERROR_USER_UNKNOWN. + + + + + + +Garcia-Martin, et al. Standards Track [Page 24] + +RFC 4740 Diameter SIP Application November 2006 + + + If a User-Name AVP is present in the Diameter UAR message, then the + Diameter server MUST authorize that User-Name AVP value is able to + register the SIP or SIPS URI included in the SIP-AOR AVP. If this + authorization fails, the Diameter server must set the Result-Code AVP + to DIAMETER_ERROR_IDENTITIES_DONT_MATCH and send it in a Diameter + User-Authorization-Answer (UAA) message. + + Note: Correlation between User-Name and SIP-AOR AVP values is + required in order to avoid registration of a SIP-AOR allocated to + another user. + + If there is a SIP-Visited-Network-Id AVP in the Diameter UAR message, + and the SIP-User-Authorization-Type AVP value received in the + Diameter UAR message is set to REGISTRATION or REGISTRATION& + CAPABILITIES, then the Diameter server SHOULD verify whether the user + is allowed to roam into the network specified in the + SIP-Visited-Network-Id AVP in the Diameter UAR message. If the user + is not allowed to roam into that network, the Diameter AAA server + MUST set the Result-Code AVP value in the Diameter UAA message to + DIAMETER_ERROR_ROAMING_NOT_ALLOWED. + + If the SIP-User-Authorization-Type AVP value received in the Diameter + UAR message is set to REGISTRATION or REGISTRATION&CAPABILITIES, then + the Diameter server SHOULD verify whether the SIP-AOR AVP value is + authorized to register in the Home Realm. Where the SIP AOR is not + authorized to register in the Home Realm, the Diameter server MUST + set the Result-Code AVP to DIAMETER_AUTHORIZATION_REJECTED and send + it in a Diameter UAA message. + + When the SIP-User-Authorization-Type AVP is not present in the + Diameter UAR message, or when it is present and its value is set to + REGISTRATION, then: + + o If the Diameter server is not aware of any previous registration + of the user name (including registrations of other SIP AORs + allocated to the same user name), then the Diameter server does + not know of any SIP server allocated to the user. In this case, + the Diameter server MUST set the Result-Code AVP value to + DIAMETER_FIRST_REGISTRATION in the Diameter UAA message, and the + Diameter server SHOULD include the required SIP server + capabilities in the SIP-Server-Capabilities AVP value in the + Diameter UAA message. The SIP-Server-Capabilities AVP assists the + Diameter client (SIP server) to select an appropriate SIP server + for the user, according to the required capabilities. + + o In some cases, the Diameter server is aware of a previously + assigned SIP server for the same or different SIP AORs allocated + to the same user name. In these cases, re-assignment of a new SIP + + + +Garcia-Martin, et al. Standards Track [Page 25] + +RFC 4740 Diameter SIP Application November 2006 + + + server may or may not be needed, depending on the capabilities of + the SIP server. The Diameter server MUST always include the + allocated SIP server URI in the SIP-Server-URI AVP of the UAA + message. If the Diameter server does not return the SIP + capabilities, the Diameter server MUST set the Result-Code AVP in + the Diameter UAA message to DIAMETER_SUBSEQUENT_REGISTRATION. + Otherwise (i.e., if the Diameter server includes a + SIP-Server-Capabilities AVP), then the Diameter server MUST set + the Result-Code AVP in the Diameter UAA message to + DIAMETER_SERVER_SELECTION. Then the Diameter client determines, + based on the received information, whether it needs to select a + new SIP server. + + When the SIP-User-Authorization-Type AVP value received in the + Diameter UAR message is set to REGISTRATION&CAPABILITIES, then + Diameter Server MUST return the list of capabilities in the + SIP-Server-Capabilities AVP value of the Diameter UAA message, it + MUST set the Result-Code to DIAMETER_SUCCESS, and it MUST NOT return + a SIP-Server-URI AVP. The SIP-Server-Capabilities AVP enables the + SIP server (Diameter client) to select another appropriate SIP server + for invoking and executing services for the user, depending on the + required capabilities. The Diameter server MAY leave the list of + capabilities empty to indicate that any SIP server can be selected. + + When the SIP-User-Authorization-Type AVP value received in the + Diameter UAR message is set to DEREGISTRATION, then: + + o If the Diameter server is aware of a SIP server assigned to the + SIP AOR under deregistration, the Diameter server MUST set the + Result-Code AVP to DIAMETER_SUCCESS and MUST set the + SIP-Server-URI AVP value to the known SIP server, and return them + in the Diameter UAA message. + + o If the Diameter server is not aware of a SIP server assigned to + the SIP AOR under deregistration, then the Diameter server MUST + set the Result-Code AVP in the Diameter UAA message to + DIAMETER_ERROR_IDENTITY_NOT_REGISTERED. + + The Message Format of the UAA command is as follows: + + <UAA> ::= < Diameter Header: 283, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Result-Code } + { Origin-Host } + { Origin-Realm } + [ SIP-Server-URI ] + + + +Garcia-Martin, et al. Standards Track [Page 26] + +RFC 4740 Diameter SIP Application November 2006 + + + [ SIP-Server-Capabilities ] + [ Authorization-Lifetime ] + [ Auth-Grace-Period ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.3. Server-Assignment-Request (SAR) Command + + The Server-Assignment-Request (SAR) command is indicated by the + Command-Code set to 284 and the Command Flags' 'R' bit set. The + Diameter client in a SIP server sends this command to the Diameter + server to indicate the completion of the authentication process and + to request that the Diameter server store the URI of the SIP server + that is currently serving the user. The main functions of the + Diameter SAR command are to inform the Diameter server of the URI of + the SIP server allocated to the user, and to store or clear it from + the Diameter server. Additionally, the Diameter client can request + to download the user profile or part of it. + + During the registration procedure, a SIP server becomes assigned to + the user. The Diameter client in the assigned SIP server MUST + include its own URI in the SIP-Server-URI AVP of the + Server-Assignment-Request (SAR) Diameter message and send it to the + Diameter server. The Diameter server then becomes aware of the + allocation of the SIP server to the user name and the server's URI. + + The Diameter client in the SIP server MAY send a Diameter SAR message + because of other reasons. These reasons are identified in the + SIP-Server-Assignment-Type AVP (Section 9.4) value. For instance, a + Diameter client in a SIP server may contact the Diameter server to + request deregistration of a user, to inform the Diameter server of an + authentication failure, or just to download the user profile. For a + complete description of all the SIP-Server-Assignment-Type AVP + values, see Section 9.4. + + Typically the reception of a SIP REGISTER request in a SIP server + will trigger the Diameter client in the SIP server to send the + Diameter SAR message. However, if a SIP server is receiving other + SIP request, such as INVITE, and the SIP server does not have the + user profile, the Diameter client in the SIP server may send the + Diameter SAR message to the Diameter server in order to download the + user profile and make the Diameter server aware of the SIP server + assigned to the user. + + + + +Garcia-Martin, et al. Standards Track [Page 27] + +RFC 4740 Diameter SIP Application November 2006 + + + The user profile is an important piece of information that dictates + the behavior of the SIP server when triggering or providing services + for the user. Typically the user profile is divided into: + + o Services to be rendered to the user when the user is registered + and initiates a SIP request. + + o Services to be rendered to the user when the user is registered + and a SIP request destined to that user arrives to the SIP proxy. + + o Services to be rendered to the user when the user is not + registered and a SIP request destined to that user arrives to the + SIP proxy. + + The SIP-Server-Assignment-Type AVP indicates the reason why the + Diameter client (SIP server) contacted the Diameter server. If the + Diameter client sets the SIP-Server-Assignment-Type AVP value to + REGISTRATION, RE_REGISTRATION, UNREGISTERED_USER, NO_ASSIGNMENT, + AUTHENTICATION_FAILURE or AUTHENTICATION_TIMEOUT, the Diameter client + MUST include exactly one SIP-AOR AVP in the Diameter SAR message. + + The SAR message MAY contain zero or more SIP-Supported-User-Data-Type + AVPs. Each of them contains a type of user data understood by the + SIP server. This allows the Diameter client to provide an indication + to the Diameter server of the different format of user data + understood by the SIP server. The Diameter server uses this + information to select one or more SIP-User-Data AVPs that will be + included in the SAA message. + + The Message Format of the SAR command is as follows: + + <SAR> ::= < Diameter Header: 284, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { SIP-Server-Assignment-Type } + { SIP-User-Data-Already-Available } + [ Destination-Host ] + [ User-Name ] + [ SIP-Server-URI ] + * [ SIP-Supported-User-Data-Type ] + * [ SIP-AOR ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + + +Garcia-Martin, et al. Standards Track [Page 28] + +RFC 4740 Diameter SIP Application November 2006 + + +8.4. Server-Assignment-Answer (SAA) Command + + The Server-Assignment-Answer (SAA) is indicated by the Command-Code + set to 284 and the Command Flags' 'R' bit cleared. The Diameter + server sends this command in response to a previously received + Diameter Server-Assignment-Request (SAR) command. The response may + include the user profile or part of it, if requested. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + The Result-Code AVP value in the Diameter SAA message may indicate a + success or an error in the execution of the Diameter SAR command. If + Result-Code AVP value in the Diameter SAA message does not contain an + error code, the SAA message MAY include one or more SIP-User-Data + AVPs that typically contain the profile of the user, indicating + services that the SIP server can provide to that user. + + The Diameter server MAY include one or more + SIP-Supported-User-Data-Type AVPs, each one identifying a type of + user data format supported in the Diameter server. If there is not a + common supported user data type between the Diameter client and the + Diameter server, the Diameter server SHOULD declare its list of + supported user data types by including one or more + SIP-Supported-User-Data-Type AVPs in a Diameter SAA message. This + indication is merely for debugging reasons, since there is not a + fallback mechanism that allows the Diameter client to retrieve the + profile in a supported format. + + If the Diameter server requires a User-Name AVP value to process the + Diameter SAR request, but the Diameter SAR message did not contain a + User-Name AVP value, the Diameter server MUST set the Result-Code AVP + value to DIAMETER_USER_NAME_REQUIRED (see Section 10.1.2) and return + it in a Diameter SAA message. Upon reception of this Diameter SAA + message with the Result-Code AVP value set to + DIAMETER_USER_NAME_REQUIRED, the SIP server typically requests + authentication by generating a SIP 401 (Unauthorized) or SIP 407 + (Proxy Authentication Required) response back to the originator. + + If the User-Name AVP is included in the Diameter SAR message, upon + reception of the Diameter SAR message, the Diameter server MUST + verify the existence of the user in the realm, i.e., the User-Name + AVP value is a valid user within that realm. If the Diameter server + does not recognize the user name received in the User-Name AVP, the + Diameter server MUST build a Diameter Server-Assignment-Answer (SAA) + message and MUST set the Result-Code AVP to + DIAMETER_ERROR_USER_UNKNOWN. + + + +Garcia-Martin, et al. Standards Track [Page 29] + +RFC 4740 Diameter SIP Application November 2006 + + + Then the Diameter server MUST authorize that User-Name AVP value is a + valid authentication name for the SIP or SIPS URI included in the + SIP-AOR AVP of the Diameter SAR message. If this authorization + fails, the Diameter server must set the Result-Code AVP to + DIAMETER_ERROR_IDENTITIES_DONT_MATCH and send it in a Diameter + Server-Assignment-Answer (SAA) message. + + After successful execution of the Diameter SAR command, the Diameter + server MUST clear the "authentication pending" flag and SHOULD move + the temporarily stored SIP server URI to permanent storage. + + The actions of the Diameter server upon reception of the Diameter SAR + message depend on the value of the SIP-Server-Assignment-Type: + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to REGISTRATION or RE_REGISTRATION, the Diameter + server SHOULD verify that there is only one SIP-AOR AVP. + Otherwise, the Diameter server MUST answer with a Diameter SAA + message with the Result-Code AVP value set to + DIAMETER_AVP_OCCURS_TOO_MANY_TIMES and MUST NOT include any + SIP-User-Data AVP. If there is only one SIP-AOR AVP and if the + SIP-User-Data-Already-Available AVP value is set to + USER_DATA_NOT_AVAILABLE, then the Diameter server SHOULD include + one or more user profile data with the SIP or SIPS URI (SIP-AOR + AVP) and all other SIP identities associated with that AVP in the + SIP-User-Data AVP value of the Diameter SAA message. On selecting + the type of user data, the Diameter server SHOULD take into + account the supported formats at the SIP server + (SIP-Supported-User-Data-Type AVP in the SAR message) and the + local policy. Additionally, the Diameter server MUST set the + Result-Code AVP value to DIAMETER_SUCCESS in the Diameter SAA + message. The Diameter server considers the SIP AOR authenticated + and registered. + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to UNREGISTERED_USER, then the Diameter server MUST + store the SIP server address included in the SIP-Server-URI AVP + value. The Diameter server will return the SIP server address in + Diameter Location-Info-Answer (LIA) messages. If the + SIP-User-Data-Already-Available AVP value is set to + USER_DATA_NOT_AVAILABLE, then the Diameter server SHOULD include + one or more user profile data associated with the SIP or SIPS URI + (SIP-AOR AVP) and associated identities in the SIP-User-Data AVP + value of the Diameter SAA message. On selecting the type of user + data, the Diameter server SHOULD take into account the supported + formats at the SIP server (SIP-Supported-User-Data-Type AVP in the + SAR message) and the local policy. The Diameter server MUST set + the Result-Code AVP value to DIAMETER_SUCCESS. The Diameter + + + +Garcia-Martin, et al. Standards Track [Page 30] + +RFC 4740 Diameter SIP Application November 2006 + + + server considers the SIP AOR UNREGISTERED, but with a SIP server + allocated to trigger and provide services for unregistered users. + Note that in case of UNREGISTERED_USER (SIP-Server-Assignment-Type + AVP), the Diameter server MUST verify that there is only one + SIP-AOR AVP. Otherwise, the Diameter server MUST answer the + Diameter SAR message with a Diameter SAA message, and it MUST set + the Result-Code AVP value to DIAMETER_AVP_OCCURS_TOO_MANY_TIMES + and MUST NOT include any SIP-User-Data AVP. + If the User-Name AVP was not present in the Diameter SAR message + and the SIP-AOR is not known for the Diameter server, the Diameter + server MUST NOT include a User-Name AVP in the Diameter SAA + message and MUST set the Result-Code AVP value to + DIAMETER_ERROR_USER_UNKNOWN. + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to TIMEOUT_DEREGISTRATION, USER_DEREGISTRATION, + DEREGISTRATION_TOO_MUCH_DATA, or ADMINISTRATIVE_DEREGISTRATION, + the Diameter server MUST clear the SIP server address associated + with all SIP AORs indicated in each of the SIP-AOR AVP values + included in the Diameter SAR message. The Diameter server + considers all of these SIP AORs as not registered. The Diameter + server MUST set the Result-Code AVP value to DIAMETER_SUCCESS in + the Diameter SAA message. + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to TIMEOUT_DEREGISTRATION_STORE_SERVER_NAME or + USER_DEREGISTRATION_STORE_SERVER_NAME, the Diameter server MAY + keep the SIP server address associated with the SIP AORs included + in the SIP-AOR AVP values of the Diameter SAR message, even though + the SIP AORs become unregistered. This feature allows a SIP + server to request that the Diameter server remain an assigned SIP + server for those SIP AORs (SIP-AOR AVP values) allocated to the + same user name, and avoid SIP server assignment. The Diameter + server MUST consider all these SIP AORs as not registered. If the + Diameter server honors the request of the Diameter client (SIP + server) to remain as an allocated SIP server, then the Diameter + server MUST keep the SIP server assigned to those SIP AORs + allocated to the username and MUST set the Result-Code AVP value + to DIAMETER_SUCCESS in the Diameter SAA message. Otherwise, when + the Diameter server does not honor the request of the Diameter + client (SIP server) to remain as an allocated SIP server, the + Diameter server MUST clear the SIP server name assigned to those + SIP AORs and it MUST set the Result-Code AVP value to + DIAMETER_SUCCESS_SERVER_NAME_NOT_STORED in the Diameter SAA + message. + + + + + + +Garcia-Martin, et al. Standards Track [Page 31] + +RFC 4740 Diameter SIP Application November 2006 + + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to NO_ASSIGNMENT, the Diameter server SHOULD first + verify that the SIP-Server-URI AVP value in the Diameter SAR + message is the same URI as the one assigned to the SIP-AOR AVP + value. If they differ, then the Diameter server MUST set the + Result-Code AVP value to DIAMETER_UNABLE_TO_COMPLY in the Diameter + SAA message. Otherwise, if the SIP-User-Data-Already-Available + AVP value is set to USER_DATA_NOT_AVAILABLE, then the Diameter + server SHOULD include the user profile data with the SIP or SIPS + URI (SIP-AOR AVP) and all other SIP identities associated with + that AVP in the SIP-User-Data AVP value of the Diameter SAA + message. On selecting the type of user data, the Diameter server + SHOULD take into account the supported formats at the SIP server + (SIP-Supported-User-Data-Type AVP in the SAR message) and the + local policy. + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to AUTHENTICATION_FAILURE or + AUTHENTICATION_TIMEOUT, the Diameter server MUST verify that there + is exactly one SIP-AOR AVP in the Diameter SAR message. If the + number of occurrences of the SIP-AOR AVP is not exactly one, the + Diameter server MUST set the Result-Code AVP value to + DIAMETER_AVP_OCCURS_TOO_MANY_TIMES in the Diameter SAA message, + and SHOULD not take further actions. If there is exactly one + SIP-AOR AVP in the Diameter SAR message, the Diameter server MUST + clear the address of the SIP server assigned to the SIP AOR + allocated to the user name, and the Diameter server MUST set the + Result-Code AVP value to DIAMETER_SUCCESS in the Diameter SAA + message. The Diameter server MUST consider the SIP AOR as not + registered. + + The Message Format of the SAA command is as follows: + + <SAA> ::= < Diameter Header: 284, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + * [ SIP-User-Data ] + [ SIP-Accounting-Information ] + * [ SIP-Supported-User-Data-Type ] + [ User-Name ] + [ Auth-Grace-Period ] + [ Authorization-Lifetime ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + + + +Garcia-Martin, et al. Standards Track [Page 32] + +RFC 4740 Diameter SIP Application November 2006 + + + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.5. Location-Info-Request (LIR) Command + + The Location-Info-Request (LIR) is indicated by the Command-Code set + to 285 and the Command Flags' 'R' bit set. The Diameter client in a + SIP server sends this command to the Diameter server to request + routing information, e.g., the URI of the SIP server assigned to the + SIP-AOR AVP value allocated to the users. + + The Message Format of the LIR command is as follows: + + <LIR> ::= < Diameter Header: 285, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { SIP-AOR } + [ Destination-Host ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.6. Location-Info-Answer (LIA) Command + + The Location-Info-Answer (LIA) is indicated by the Command-Code set + to 285 and the Command Flags' 'R' bit cleared. The Diameter server + sends this command in response to a previously received Diameter + Location-Info-Request (LIR) command. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. When the Diameter server finds an error in processing + the Diameter LIR message, the Diameter server MUST stop the process + of the message and answer with a Diameter LIA message that includes + the appropriate error code in the Result-Code AVP value. When there + is no error, the Diameter server MUST set the Result-Code AVP value + to DIAMETER_SUCCESS in the Diameter LIA message. + + One of the errors that the Diameter server may find is that the + SIP-AOR AVP value is not a valid user in the realm. In such cases, + the Diameter server MUST set the Result-Code AVP value to + DIAMETER_ERROR_USER_UNKNOWN and return it in a Diameter LIA message. + + + +Garcia-Martin, et al. Standards Track [Page 33] + +RFC 4740 Diameter SIP Application November 2006 + + + If the Diameter server cannot process the Diameter LIR command, e.g., + due to a database error, the Diameter server MUST set the Result-Code + AVP value to DIAMETER_UNABLE_TO_COMPLY and return it in a Diameter + LIA message. The Diameter server MUST NOT include any SIP-Server-URI + or SIP-Server-Capabilities AVP in the Diameter LIA message. + + The Diameter server may or may not be aware of a SIP server assigned + to the SIP-AOR AVP value included in the Diameter LIR message. If + the Diameter server is aware of a SIP server allocated to that + particular user, the Diameter server MUST include the URI of such SIP + server in the SIP-Server-URI AVP and return it in a Diameter LIA + message. This is typically the situation when the user is either + registered, or unregistered but a SIP server is still assigned to the + user. + + When the Diameter server is not aware of a SIP server allocated to + the user (typically the case when the user unregistered), the + Result-Code AVP value in the Diameter LIA message depends on whether + the Diameter server is aware that the user has services defined for + unregistered users: + + o Those users who have services defined for unregistered users may + require the allocation of a SIP server to trigger and perhaps + execute those services. Therefore, when the Diameter server is + not aware of an assigned SIP server, but the user has services + defined for unregistered users, the Diameter server MUST set the + Result-Code AVP value to DIAMETER_UNREGISTERED_SERVICE and return + it in a Diameter LIA message. The Diameter server MAY also + include a SIP-Server-Capabilities AVP to facilitate the SIP server + (Diameter client) with the selection of an appropriate SIP server + with the required capabilities. Absence of the SIP-Server- + Capabilities AVP indicates to the SIP server (Diameter client) + that any SIP server is suitable to be allocated for the user. + + o Those users who do not have service defined for unregistered users + do not require further processing. The Diameter server MUST set + the Result-Code AVP value to + DIAMETER_ERROR_IDENTITY_NOT_REGISTERED and return it to the + Diameter client in a Diameter LIA message. The SIP server + (Diameter client) may return the appropriate SIP response (e.g., + 480 (Temporarily unavailable)) to the original SIP request. + + The Message Format of the LIA command is as follows: + + <LIA> ::= < Diameter Header: 285, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + + + +Garcia-Martin, et al. Standards Track [Page 34] + +RFC 4740 Diameter SIP Application November 2006 + + + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ SIP-Server-URI ] + [ SIP-Server-Capabilities ] + [ Auth-Grace-Period ] + [ Authorization-Lifetime ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.7. Multimedia-Auth-Request (MAR) Command + + The Multimedia-Auth-Request (MAR) command is indicated by the + Command-Code set to 286 and the Command Flags' 'R' bit set. The + Diameter client in a SIP server sends this command to the Diameter + server to request that the Diameter server authenticate and authorize + a user attempt to use some SIP service (in this context, SIP service + can be something as simple as a SIP subscription or using the proxy + services for a SIP request). + + The MAR command may also register the SIP server's own URI to the + Diameter server, so that future LIR/LIA messages can return this URI. + If the SIP server is acting as a SIP registrar (see examples in + Sections 6.2 and 6.3), its Diameter client MUST include a SIP- + Server-URI AVP in the MAR command. In any other cases (see example + in Section 6.4), its Diameter client MUST NOT include a SIP-Server- + URI AVP in the MAR command. + + The SIP-Method AVP MUST include the SIP method name of the SIP + request that triggered this Diameter MAR message. The Diameter + server can use this AVP to authorize some SIP requests depending on + the method. + + The Diameter MAR message MUST include a SIP-AOR AVP. The SIP-AOR AVP + indicates the target of the SIP request. The value of the AVP is + extracted from different places in SIP request, depending on the + semantics of the SIP request. For SIP REGISTER messages the SIP-AOR + AVP value indicates the intended public user identity under + registration, and it is the SIP or SIPS URI populated in the To + header field value (addr-spec as per RFC 3261 [RFC3261]) of the SIP + REGISTER request. For other types of SIP requests, such as INVITE, + SUBSCRIBE, MESSAGE, etc., the SIP-AOR AVP value indicates the + intended destination of the request. This is typically populated in + the Request-URI of the SIP request. Extracting the SIP-AOR AVP value + + + +Garcia-Martin, et al. Standards Track [Page 35] + +RFC 4740 Diameter SIP Application November 2006 + + + from the proper SIP header field is the Diameter client's + responsibility. Extensions to SIP (new SIP methods or new semantics) + may require the SIP-AOR to be extracted from other parts of the + request. + + If the SIP request includes some sort of authentication information, + the Diameter client MUST include the user name, extracted from the + authentication information of the SIP request, in the User-Name AVP + value. + + The Message Format of the MAR command is as follows: + + <MAR> ::= < Diameter Header: 286, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { SIP-AOR } + { SIP-Method } + [ Destination-Host ] + [ User-Name ] + [ SIP-Server-URI ] + [ SIP-Number-Auth-Items ] + [ SIP-Auth-Data-Item ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.8. Multimedia-Auth-Answer (MAA) Command + + The Multimedia-Auth-Answer (MAA) is indicated by the Command-Code set + to 286 and the Command Flags' 'R' bit cleared. The Diameter server + sends this command in response to a previously received Diameter + Multimedia-Auth-Request (MAR) command. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + If the Diameter server requires a User-Name AVP value to process the + Diameter MAR request, but the Diameter MAR message did not contain a + User-Name AVP value, the Diameter server MUST set the Result-Code AVP + value to DIAMETER_USER_NAME_REQUIRED (see Section 10.1.2) and return + it in a Diameter MAA message. The Diameter server MAY include a + SIP-Number-Auth-Items AVP and one or more SIP-Auth-Data-Item AVPs + with authentication information (e.g., a challenge). Upon reception + + + +Garcia-Martin, et al. Standards Track [Page 36] + +RFC 4740 Diameter SIP Application November 2006 + + + of this Diameter MAA message with the Result-Code AVP value set to + DIAMETER_USER_NAME_REQUIRED, the SIP server typically requests + authentication by generating a SIP 401 (Unauthorized) or SIP 407 + (Proxy Authentication Required) response back to the originator. + + If the User-Name AVP is present in the Diameter MAR message, the + Diameter server MUST verify the existence of the user in the realm, + i.e., the User-Name AVP value is a valid user within that realm. If + the Diameter server does not recognize the user name received in the + User-Name AVP, the Diameter server MUST build a Diameter + Multimedia-Auth-Answer (MAA) message and MUST set the Result-Code AVP + to DIAMETER_ERROR_USER_UNKNOWN. + + If the SIP-Methods AVP value of the Diameter MAR message is set to + REGISTER and a User-Name AVP is present, then the Diameter server + MUST authorize that User-Name AVP value is able to use the URI + included in the SIP-AOR AVP. If this authorization fails, the + Diameter server must set the Result-Code AVP to + DIAMETER_ERROR_IDENTITIES_DONT_MATCH and send it in a Diameter + Multimedia-Auth-Answer (MAA) message. + + Note: Correlation between User-Name and SIP-AOR AVP values is only + required for SIP REGISTER request, to prevent a user from + registering a SIP-AOR allocated to another user. In other types + of SIP requests (e.g., INVITE), the SIP-AOR indicates the intended + destination of the request, rather than the originator of it. + + The Diameter server MUST verify whether the authentication scheme + (SIP-Authentication-Scheme AVP value) indicated in the grouped + SIP-Auth-Data-Item AVP is supported or not. If that authentication + scheme is not supported, then the Diameter server MUST set the + Result-Code AVP to DIAMETER_ERROR_AUTH_SCHEME_NOT_SUPPORTED and send + it in a Diameter Multimedia-Auth-Answer (MAA) message. + + If the SIP-Number-Auth-Items AVP is present in the Diameter MAR + message, it indicates the number of authentication data items that + the Diameter client is requesting. It is RECOMMENDED that the + Diameter server, when building the Diameter MAA message, includes a + number of SIP-Auth-Data-Item AVPs that are a subset of the + authentication data items requested by the Diameter client in the + SIP-Number-Auth-Items AVP value of the Diameter MAR message. + + If the SIP-Server-URI AVP is present in the Diameter MAR message, + then the Diameter server MUST compare the stored SIP server (assigned + to the user) with the SIP-Server-URI AVP value (received in the + Diameter MAR message). If they don't match, the Diameter server MUST + temporarily save the newly received SIP server assigned to the user, + and MUST set an "authentication pending" flag for the user. If they + + + +Garcia-Martin, et al. Standards Track [Page 37] + +RFC 4740 Diameter SIP Application November 2006 + + + match, the Diameter server shall clear the "authentication pending" + flag for the user. + + In any other situation, if there is a success in processing the + Diameter MAR command and the Diameter server stored the + SIP-Server-URI, the Diameter server MUST set the Result-Code AVP + value to DIAMETER_SUCCESS and return it in a Diameter MAA message. + + If there is a success in processing the Diameter MAR command, but the + Diameter server does not store the SIP-Server-URI because the AVP was + not present in the Diameter MAR command, then the Diameter server + MUST set the Result-Code AVP value to either: + + 1. DIAMETER_SUCCESS_AUTH_SENT_SERVER_NOT_STORED, if the Diameter + server is sending authentication credentials to create a + challenge. + + 2. DIAMETER_SUCCESS_SERVER_NAME_NOT_STORED, if the Diameter server + successfully authenticated the user and authorized the SIP server + to proceed with the SIP request. + + Otherwise, the Diameter server MUST set the Result-Code AVP value to + DIAMETER_UNABLE_TO_COMPLY, and it MUST NOT include any + SIP-Auth-Data-Item AVP. + + The Message Format of the MAA command is as follows: + + <MAA> ::= < Diameter Header: 286, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ User-Name ] + [ SIP-AOR ] + [ SIP-Number-Auth-Items ] + * [ SIP-Auth-Data-Item ] + [ Authorization-Lifetime ] + [ Auth-Grace-Period ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + + + + +Garcia-Martin, et al. Standards Track [Page 38] + +RFC 4740 Diameter SIP Application November 2006 + + +8.9. Registration-Termination-Request (RTR) Command + + The Registration-Termination-Request (RTR) command is indicated by + the Command-Code set to 287 and the Command Flags' 'R' bit set. The + Diameter server sends this command to the Diameter client in a SIP + server to indicate to the SIP server that one or more SIP AORs have + to be deregistered. The command allows an operator to + administratively cancel the registration of a user from a centralized + Diameter server. + + The Diameter server has the capability to initiate the deregistration + of a user and inform the SIP server by means of the Diameter RTR + command. The Diameter server can decide whether only one SIP AOR is + going to be deregistered, a list of SIP AORs, or all the SIP AORs + allocated to the user. + + The absence of a SIP-AOR AVP in the Diameter RTR message indicates + that all the SIP AORs allocated to the user identified by the + User-Name AVP are being deregistered. + + The Diameter server MUST include a SIP-Deregistration-Reason AVP + value to indicate the reason for the deregistration. + + The Message Format of the RTR command is as follows: + + <RTR> ::= < Diameter Header: 287, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Host } + { SIP-Deregistration-Reason } + [ Destination-Realm ] + [ User-Name ] + * [ SIP-AOR ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.10. Registration-Termination-Answer (RTA) Command + + The Registration-Termination-Answer (RTA) is indicated by the + Command-Code set to 287 and the Command Flags' 'R' bit cleared. The + Diameter client sends this command in response to a previously + received Diameter Registration-Termination-Request (RTR) command. + + + + + +Garcia-Martin, et al. Standards Track [Page 39] + +RFC 4740 Diameter SIP Application November 2006 + + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + If the SIP server (Diameter client) requires a User-Name AVP value to + process the Diameter RTR request, but the Diameter RTR message did + not contain a User-Name AVP value, the Diameter client MUST set the + Result-Code AVP value to DIAMETER_USER_NAME_REQUIRED (see Section + 10.1.2) and return it in a Diameter RTA message. + + The SIP server (Diameter client) applies the administrative + deregistration to each of the URIs included in each of the SIP-AOR + AVP values, or, if there is no SIP-AOR AVP present in the Diameter + RTR request, to all the URIs allocated to the User-Name AVP value. + + The value of the SIP-Deregistration-Reason AVP in the Diameter RTR + command has an effect on the actions performed at the SIP server + (Diameter client): + + o If the value is set to PERMANENT_TERMINATION, then the user has + terminated his/her registration to the realm. If informing the + interested parties (e.g., subscribers to the "reg" event + [RFC3680]) about the administrative deregistration is supported + through SIP procedures, the SIP server (Diameter client) will do + so. The Diameter Client in the SIP Server SHOULD NOT request a + new user registration. The SIP server clears the registration + state of the deregistered AORs. + + o If the value is set to NEW_SIP_SERVER_ASSIGNED, the Diameter + server informs the SIP server (Diameter client) that a new SIP + server has been allocated to the user, due to some reason. The + SIP server, if supported through SIP procedures, will inform the + interested parties (e.g., subscribers to the "reg" event + [RFC3680]) about the administrative deregistration at this SIP + server. The Diameter client in the SIP server SHOULD NOT request + a new user registration. The SIP server clears the registration + state of the deregistered SIP AORs. + + o If the value is set to SIP_SERVER_CHANGE, the Diameter server + informs the SIP server (Diameter client) that a new SIP server has + to be allocated to the user, e.g., due to user's capabilities + requiring a new SIP server, or not enough resources in the current + SIP server. If informing the interested parties about the + administrative deregistration is supported through SIP procedures + (e.g., subscriptions to the "reg" event [RFC3680]), the SIP server + will do so. The Diameter client in the SIP Server SHOULD NOT + request a new user registration. The SIP server clears the + registration state of the deregistered SIP AORs. + + + +Garcia-Martin, et al. Standards Track [Page 40] + +RFC 4740 Diameter SIP Application November 2006 + + + o If the value is set to REMOVE_SIP_SERVER, the Diameter server + informs the SIP server (Diameter client) that the SIP server will + no longer be bound in the Diameter server with that user. The SIP + server can delete all data related to the user. + + The Message Format of the RTA command is as follows: + + <RTA> ::= < Diameter Header: 287, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ Authorization-Lifetime ] + [ Auth-Grace-Period ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.11. Push-Profile-Request (PPR) Command + + The Push-Profile-Request (PPR) command is indicated by the + Command-Code set to 288 and the Command Flags' 'R' bit set. The + Diameter server sends this command to the Diameter client in a SIP + server to update either the user profile of an already registered + user in that SIP server or the SIP accounting information. This + allows an operator to modify the data of a user profile or the + accounting information and push it to the SIP server where the user + is registered. + + Each user has a user profile associated with him/her and other + accounting information. The profile or the accounting information + may change with time, e.g., due to addition of new services to the + user. When the user profile or the accounting information changes, + the Diameter server sends a Diameter Push-Profile-Request (PPR) + command to the Diameter client in a SIP server, in order to start + applying those new services. + + A PPR command MAY contain a SIP-Accounting-Information AVP that + updates the addresses of the accounting servers. Changes in the + addresses of the accounting servers take effect immediately. The + Diameter client SHOULD close any existing accounting session with the + existing server and start providing accounting information to the + newly acquired accounting server. + + + +Garcia-Martin, et al. Standards Track [Page 41] + +RFC 4740 Diameter SIP Application November 2006 + + + A PPR command MAY contain zero or more SIP-User-Data AVP values + containing the new user profile. On selecting the type of user data, + the Diameter server SHOULD take into account the supported formats at + the SIP server (SIP-Supported-User-Data-Type AVP sent in a previous + SAR message) and the local policy. + + The User-Name AVP indicates the user to whom the profile is + applicable. + + The Message Format of the PPR command is as follows: + + <PPR> ::= < Diameter Header: 288, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { User-Name } + * [ SIP-User-Data ] + [ SIP-Accounting-Information ] + [ Destination-Host ] + [ Authorization-Lifetime ] + [ Auth-Grace-Period ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + +8.12. Push-Profile-Answer (PPA) Command + + The Push-Profile-Answer (PPA) is indicated by the Command-Code set to + 288 and the Command Flags' 'R' bit cleared. The Diameter client + sends this command in response to a previously received Diameter + Push-Profile-Request (PPR) command. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + If there is no error when processing the received Diameter PPR + message, the SIP server (Diameter client) MUST download the received + user profile from the SIP-User-Data AVP values in the Diameter PPR + message and store it associated with the user specified in the + User-Name AVP value. + + If the SIP server does not recognize or does not support some of the + data transferred in the SIP-User-Data AVP values, the Diameter client + in the SIP server MUST return a Diameter PPA message that includes a + + + +Garcia-Martin, et al. Standards Track [Page 42] + +RFC 4740 Diameter SIP Application November 2006 + + + Result-Code AVP set to the value + DIAMETER_ERROR_NOT_SUPPORTED_USER_DATA. + + If the SIP server (Diameter client) receives a Diameter PPR message + with a User-Name AVP that is unknown, the Diameter client MUST set + the Result-Code AVP value to DIAMETER_ERROR_USER_UNKNOWN and MUST + return it to the Diameter server in a Diameter PPA message. + + If the SIP server (Diameter client) receives in the + SIP-User-Data-Content AVP value (of the grouped SIP-User-Data AVP) + more data than it can accept, it MUST set the Result-Code AVP value + to DIAMETER_ERROR_TOO_MUCH_DATA and MUST return it to the Diameter + server in a Diameter PPA message. The SIP server MUST NOT override + the existing user profile with the one received in the PPR message. + + If the Diameter server receives the Result-Code AVP value set to + DIAMETER_ERROR_TOO_MUCH_DATA in a Diameter PPA message, it SHOULD + force a new re-registration of the user by sending to the Diameter + client a Diameter Registration-Termination-Request (RTR) with the + SIP-Deregistration-Reason AVP value set to SIP_SERVER_CHANGE. This + will force a re-registration of the user and will trigger a selection + of a new SIP server. + + If the Diameter client is not able to honor the command, for any + other reason, it MUST set the Result-Code AVP value to + DIAMETER_UNABLE_TO_COMPLY and it MUST return it in a Diameter PPA + message. + + The Message Format of the PPA command is as follows: + + <PPA> ::= < Diameter Header: 288, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 43] + +RFC 4740 Diameter SIP Application November 2006 + + +9. Diameter SIP Application AVPs + + This section defines new AVPs used in this Diameter SIP application. + Applications compliant with this specification MUST implement these + AVPs. + + Table 2 lists the new AVPs defined in this Diameter SIP application. + The following abbreviations are used in the Data-Type column: + + o DURI: DiameterURI + o E: Enumerated + o G: Grouped + o OS: OctetString + o UTF8S: UTF8String + o U32: Unsigned32 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 44] + +RFC 4740 Diameter SIP Application November 2006 + + + +-----------------------------------+------+----------------+-------+ + | Attribute Name | AVP | Reference | Data- | + | | Code | | Type | + +-----------------------------------+------+----------------+-------+ + | SIP-Accounting-Information | 368 | Section 9.1 | G | + | SIP-Accounting-Server-URI | 369 | Section 9.1.1 | DURI | + | SIP-Credit-Control-Server-URI | 370 | Section 9.1.2 | DURI | + | SIP-Server-URI | 371 | Section 9.2 | UTF8S | + | SIP-Server-Capabilities | 372 | Section 9.3 | G | + | SIP-Mandatory-Capability | 373 | Section 9.3.1 | U32 | + | SIP-Optional-Capability | 374 | Section 9.3.2 | U32 | + | SIP-Server-Assignment-Type | 375 | Section 9.4 | E | + | SIP-Auth-Data-Item | 376 | Section 9.5 | G | + | SIP-Authentication-Scheme | 377 | Section 9.5.1 | E | + | SIP-Item-Number | 378 | Section 9.5.2 | U32 | + | SIP-Authenticate | 379 | Section 9.5.3 | G | + | SIP-Authorization | 380 | Section 9.5.4 | G | + | SIP-Authentication-Info | 381 | Section 9.5.5 | G | + | SIP-Number-Auth-Items | 382 | Section 9.6 | U32 | + | SIP-Deregistration-Reason | 383 | Section 9.7 | G | + | SIP-Reason-Code | 384 | Section 9.7.1 | E | + | SIP-Reason-Info | 385 | Section 9.7.2 | UTF8S | + | SIP-Visited-Network-Id | 386 | Section 9.9 | UTF8S | + | SIP-User-Authorization-Type | 387 | Section 9.10 | E | + | SIP-Supported-User-Data-Type | 388 | Section 9.11 | UTF8S | + | SIP-User-Data | 389 | Section 9.12 | G | + | SIP-User-Data-Type | 390 | Section 9.12.1 | UTF8S | + | SIP-User-Data-Contents | 391 | Section 9.12.2 | OS | + | SIP-User-Data-Already-Available | 392 | Section 9.13 | E | + | SIP-Method | 393 | Section 9.14 | UTF8S | + +-----------------------------------+------+----------------+-------+ + + Table 2: Defined AVPs + + Table 3 expands the table of AVPs included in Section 4.5 of RFC 3588 + [RFC3588]. The table indicates the Diameter AVPs defined in this + Diameter SIP Application, their possible flag values, and whether the + AVP may be encrypted. The acronyms 'M', 'P', and 'V' refer to AVP + flags whose semantics are described in RFC 3588 [RFC3588]. The value + of the 'Encr' column is also described in RFC 3588 [RFC3588]. + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 45] + +RFC 4740 Diameter SIP Application November 2006 + + + +----------------------------------+------+-----+-----+------+------+ + | Attribute Name | MUST | MAY | SHD | MUST | Encr | + | | | | NOT | NOT | | + +----------------------------------+------+-----+-----+------+------+ + | SIP-Accounting-Information | M | P | | V | N | + | SIP-Accounting-Server-URI | M | P | | V | N | + | SIP-Credit-Control-Server-URI | M | P | | V | N | + | SIP-Server-URI | M | P | | V | N | + | SIP-Server-Capabilities | M | P | | V | N | + | SIP-Mandatory-Capability | M | P | | V | N | + | SIP-Optional-Capability | M | P | | V | N | + | SIP-Server-Assignment-Type | M | P | | V | N | + | SIP-Auth-Data-Item | M | P | | V | N | + | SIP-Authentication-Scheme | M | P | | V | N | + | SIP-Item-Number | M | P | | V | N | + | SIP-Authenticate | M | P | | V | N | + | SIP-Authorization | M | P | | V | N | + | SIP-Authentication-Info | M | P | | V | N | + | SIP-Number-Auth-Items | M | P | | V | N | + | SIP-Deregistration-Reason | M | P | | V | N | + | SIP-Reason-Code | M | P | | V | N | + | SIP-Reason-Info | M | P | | V | N | + | SIP-Visited-Network-Id | M | P | | V | N | + | SIP-User-Authorization-Type | M | P | | V | N | + | SIP-Supported-User-Data-Type | M | P | | V | N | + | SIP-User-Data | M | P | | V | N | + | SIP-User-Data-Type | M | P | | V | N | + | SIP-User-Data-Contents | M | P | | V | N | + | SIP-User-Data-Already-Available | M | P | | V | N | + | SIP-Method | M | P | | V | N | + +----------------------------------+------+-----+-----+------+------+ + + Table 3: Summary of the new AVPs flags + +9.1. SIP-Accounting-Information AVP + + The SIP-Accounting-Information (AVP Code 368) is of type Grouped, and + contains the Diameter addresses of those nodes that are able to + collect accounting information. + + The SIP-Accounting-Information AVP is defined as follows (per the + grouped-avp-def of RFC 3588 [RFC3588]): + + SIP-Accounting-Information ::= < AVP Header: 368 > + * [ SIP-Accounting-Server-URI ] + * [ SIP-Credit-Control-Server-URI ] + * [ AVP] + + + + +Garcia-Martin, et al. Standards Track [Page 46] + +RFC 4740 Diameter SIP Application November 2006 + + +9.1.1. SIP-Accounting-Server-URI AVP + + The SIP-Accounting-Server-URI AVP (AVP Code 369) is of type + DiameterURI. This AVP contains the address of a Diameter server that + is able to receive SIP-session-related accounting information. + +9.1.2. SIP-Credit-Control-Server-URI AVP + + The SIP-Credit-Control-Server-URI AVP (AVP Code 370) is of type + DiameterURI. This AVP contains the address of a Diameter server that + is able to authorize real-time credit control usage. The Diameter + Credit-Control Application [RFC4006] may be used for this purpose. + +9.2. SIP-Server-URI AVP + + The SIP-Server-URI AVP (AVP Code 371) is of type UTF8String. This + AVP contains a SIP or SIPS URI (as defined in RFC 3261 [RFC3261]) + that identifies a SIP server. + +9.3. SIP-Server-Capabilities AVP + + The SIP-Server-Capabilities AVP (AVP Code 372) is of type Grouped. + The Diameter indicates in this AVP the requirements for a particular + SIP capability, so that the Diameter client (SIP server) is able to + select another appropriate SIP server to serve the user. + + The SIP-Server-Capabilities AVP allows a Diameter client (SIP server) + to select another SIP server for triggering or executing services to + the user. A user may have enabled some services that require the + implementation of certain capabilities in the SIP server that + triggers or executes those services. For example, the SIP server + that triggers or executes services to this user may need to implement + SIP servlets [JSR-000116], Call Processing Language (CPL) [RFC3880], + or any other kind of capability. Or perhaps that user belongs to a + premium users group that has a certain stringent quality-of-service + agreement that requires a fast SIP server. The capabilities required + or recommended to a given user are conveyed in the + SIP-Server-Capabilities AVP. When it receives them, the Diameter + client (SIP server) that does the SIP server selection needs to have + the means to find out available SIP servers that meet the required or + optional capabilities. Such means are outside the scope of this + specification. + + Note that the SIP-Server-Capabilities AVP assists the Diameter client + (SIP server) to produce a subset of all the available SIP servers to + be allocated to the user in the Home Realm; this is the subset that + conforms the requirements of capabilities on a per-user basis. + Typically this subset will be formed of more than a single SIP + + + +Garcia-Martin, et al. Standards Track [Page 47] + +RFC 4740 Diameter SIP Application November 2006 + + + server, so once the subset of those SIP servers is identified, it is + possible that several instances of these SIP servers exist, in which + case the Diameter client (SIP server) should choose one particular + SIP server to execute and trigger services to this user. It is + expected that at this point the SIP server (Diameter client) will + follow the procedures of RFC 3263 [RFC3263] to allocate one SIP + server to the user. + + The SIP-Server-Capabilities AVP is defined as follows (per the + grouped-avp-def of RFC 3588 [RFC3588]): + + SIP-Server-Capabilities ::= < AVP Header: 372 > + * [ SIP-Mandatory-Capability ] + * [ SIP-Optional-Capability ] + * [ SIP-Server-URI ] + * [ AVP ] + +9.3.1. SIP-Mandatory-Capability AVP + + The SIP-Mandatory-Capability AVP (AVP Code 373) is of type + Unsigned32. The value represents a certain capability (or set of + capabilities) that have to be fulfilled by the SIP server allocated + to the user. + + The semantics of the different values are not standardized, as it is + a matter of the administrative network to allocate its own semantics + within its own network. Each value has to represent a single + capability within the administrative network. + +9.3.2. SIP-Optional-Capability AVP + + The SIP-Optional-Capability AVP (AVP Code 374) is of type Unsigned32. + The value represents a certain capability (or set of capabilities) + that, optionally, may be fulfilled by the SIP server allocated to the + user. + + The semantics of the different values are not standardized, as it is + a matter of the administrative network to allocate its own semantics + within its own network. Each value has to represent a single + capability within the administrative network. + +9.4. SIP-Server-Assignment-Type AVP + + The SIP-Server-Assignment-Type AVP (AVP Code 375) is of type + Enumerated and indicates the type of server update being performed in + a Diameter Server-Assignment-Request (SAR) operation. The following + values are defined: + + + + +Garcia-Martin, et al. Standards Track [Page 48] + +RFC 4740 Diameter SIP Application November 2006 + + + o NO_ASSIGNMENT (0) + The Diameter client uses this value to request the user profile of + a SIP AOR, without affecting the registration state of that + identity. + + o REGISTRATION (1) + First SIP registration of a SIP AOR. + + o RE_REGISTRATION (2) + Subsequent SIP registration of a SIP AOR. + + o UNREGISTERED_USER (3) + The SIP server has received a SIP request (e.g., SIP INVITE) + addressed for a SIP AOR that is not registered. + + o TIMEOUT_DEREGISTRATION (4) + The SIP registration timer of an identity has expired. + + o USER_DEREGISTRATION (5) + The SIP server has received a request to deregister a SIP AOR. + + o TIMEOUT_DEREGISTRATION_STORE_SERVER_NAME (6) + The SIP registration timer of an identity has expired. The SIP + server keeps the user data stored and requests the Diameter server + to store the SIP server address. + + o USER_DEREGISTRATION_STORE_SERVER_NAME (7) + The SIP server has received a user-initiated deregistration + request. The SIP server keeps the user data stored and requests + the Diameter server to store the SIP server address. + + o ADMINISTRATIVE_DEREGISTRATION (8) + The SIP server, due to administrative reasons, has deregistered a + SIP AOR. + + o AUTHENTICATION_FAILURE (9) + The authentication of a user has failed. + + o AUTHENTICATION_TIMEOUT (10) + The authentication timer has expired. + + o DEREGISTRATION_TOO_MUCH_DATA (11) + The SIP server has requested user profile information from the + Diameter server and has received a volume of data higher than it + can accept. + + + + + + +Garcia-Martin, et al. Standards Track [Page 49] + +RFC 4740 Diameter SIP Application November 2006 + + +9.5. SIP-Auth-Data-Item AVP + + The SIP-Auth-Data-Item (AVP Code 376) is of type Grouped and contains + the authentication and/or authorization information pertaining to a + user. + + When the Diameter server uses the grouped SIP-Auth-Data-Item AVP to + include a SIP-Authenticate AVP, the Diameter server MUST send a + maximum of one authentication data item (e.g., in case the SIP + request contained several credentials). Section 11 contains a + detailed discussion and normative text of the case when a SIP request + contains several credentials. + + The SIP-Auth-Data-Item AVP is defined as follows (per the + grouped-avp-def of RFC 3588 [RFC3588]): + + SIP-Auth-Data-Item ::= < AVP Header: 376 > + { SIP-Authentication-Scheme } + [ SIP-Item-Number ] + [ SIP-Authenticate ] + [ SIP-Authorization ] + [ SIP-Authentication-Info ] + * [ AVP ] + +9.5.1. SIP-Authentication-Scheme AVP + + The SIP-Authentication-Scheme AVP (AVP Code 377) is of type + Enumerated and indicates the authentication scheme used in the + authentication of SIP services. RFC 2617 identifies this value as an + "auth-scheme" (see Section 1.2 of RFC 2617 [RFC2617]). The only + currently defined value is: + + o DIGEST (0) to indicate HTTP Digest authentication as specified in + RFC 2617 [RFC2617] Section 3.2.1. Derivative work is also + considered Digest authentication scheme, as long as the + "auth-scheme" is identified as Digest in the SIP headers carrying + the HTTP authentication. This includes, e.g., the HTTP Digest + authentication using AKA [RFC3310]. + + Each HTTP Digest directive (parameter) is transported in a + corresponding AVP, whose name follows the pattern Digest-*. The + Digest-* AVPs are RADIUS attributes imported from the RADIUS + Extension for Digest Authentication [RFC4590] namespace, allowing a + smooth transition between RADIUS and Diameter applications supporting + SIP. The Diameter SIP application goes a step further by grouping + the Digest-* AVPs into the SIP-Authenticate, SIP-Authorization, and + + + + + +Garcia-Martin, et al. Standards Track [Page 50] + +RFC 4740 Diameter SIP Application November 2006 + + + SIP-Authentication-Info grouped AVPs that correspond to the SIP WWW- + Authenticate/Proxy-Authentication, Authorization/Proxy-Authorization, + and Authentication-Info headers fields, respectively. + + Note: Due to the fact that HTTP Digest authentication [RFC2617] is + the only mandatory authentication mechanism in SIP, this memo only + provides support for HTTP Digest authentication and derivative + work such as HTTP Digest authentication using AKA [RFC3310]. + Extensions to this memo can register new values and new AVPs to + provide support for other authentication schemes or extensions to + HTTP Digest authentication. + + Note: Although RFC 2617 [RFC2617] defines the Basic and Digest + schemes for authenticating HTTP requests, RFC 3261 [RFC3261] only + imports HTTP Digest as a mechanism to provide authentication in + SIP. + + Due to syntactic requirements, HTTP Digest authentication has to + escape quote characters in contents of HTTP Digest directives. When + translating directives into Digest-* AVPs, the Diameter client or + server removes the surrounding quotes where present, as required by + the syntax of the Digest-* attributes defined in the "RADIUS + Extension for Digest Authentication" [RFC4590]. + +9.5.2. SIP-Item-Number AVP + + The SIP-Item-Number (AVP Code 378) is of type Unsigned32 and is + included in a SIP-Auth-Data-Item grouped AVP in circumstances where + there are multiple occurrences of SIP-Auth-Data-Item AVPs and the + order of processing is relevant. The AVP indicates the order in + which the Grouped SIP-Auth-Data-Item should be processed. Lower + values of the SIP-Item-Number AVP indicate that the whole + SIP-Auth-Data-Item SHOULD be processed before other + SIP-Auth-Data-Item AVPs that contain higher values in the + SIP-Item-Number AVP. + +9.5.3. SIP-Authenticate AVP + + The SIP-Authenticate AVP (AVP Code 379) is of type Grouped and + contains a reconstruction of either the SIP WWW-Authenticate or + Proxy-Authentication header fields specified in RFC 2617 [RFC2617] + for the HTTP Digest authentication scheme. Additionally, the AVP may + include a Digest-HA1 AVP that contains H(A1) (as defined in RFC 2617 + [RFC2617]). H(A1) allows the Diameter client to create an expected + response and compare it with the Digest response received from the + SIP UA. + + + + + +Garcia-Martin, et al. Standards Track [Page 51] + +RFC 4740 Diameter SIP Application November 2006 + + + The SIP-Authenticate AVP is defined as follows (per the + grouped-avp-def of RFC 3588 [RFC3588]): + + SIP-Authenticate ::= < AVP Header: 379 > + { Digest-Realm } + { Digest-Nonce } + [ Digest-Domain ] + [ Digest-Opaque ] + [ Digest-Stale ] + [ Digest-Algorithm ] + [ Digest-QoP ] + [ Digest-HA1] + * [ Digest-Auth-Param ] + * [ AVP ] + +9.5.4. SIP-Authorization AVP + + The SIP-Authorization AVP (AVP Code 380) is of type Grouped and + contains a reconstruction of either the SIP Authorization or + Proxy-Authorization header fields specified in RFC 2617 [RFC2617] for + the HTTP Digest authentication scheme. + + The SIP-Authorization AVP is defined as follows (per the + grouped-avp-def of RFC 3588 [RFC3588]): + + SIP-Authorization ::= < AVP Header: 380 > + { Digest-Username } + { Digest-Realm } + { Digest-Nonce } + { Digest-URI } + { Digest-Response } + [ Digest-Algorithm ] + [ Digest-CNonce ] + [ Digest-Opaque ] + [ Digest-QoP ] + [ Digest-Nonce-Count ] + [ Digest-Method] + [ Digest-Entity-Body-Hash ] + * [ Digest-Auth-Param ] + * [ AVP ] + +9.5.5. SIP-Authentication-Info AVP + + The SIP-Authentication-Info AVP (AVP Code 381) is of type Grouped and + contains a reconstruction of the SIP Authentication-Info header + specified in RFC 2617 [RFC2617] for the HTTP Digest authentication + scheme. + + + + +Garcia-Martin, et al. Standards Track [Page 52] + +RFC 4740 Diameter SIP Application November 2006 + + + The SIP-Authentication-Info AVP is defined as follows (per the + grouped-avp-def of RFC 3588 [RFC3588]): + + SIP-Authentication-Info ::= < AVP Header: 381 > + [ Digest-Nextnonce ] + [ Digest-QoP ] + [ Digest-Response-Auth ] + [ Digest-CNonce ] + [ Digest-Nonce-Count ] + * [ AVP ] + + Note that, in some cases, the Digest-Response-Auth AVP cannot be + calculated at the Diameter server, but has to be calculated at the + Diameter client (SIP server). For example, if the value of the + quality of protection (qop) parameter in Digest is set to "auth-int", + then the response-digest (rspauth parameter value in Digest) is + calculated with the hash of the body of the SIP response, which is + not available at the Diameter server. In this case, the Diameter + client (SIP server) must calculate the response-digest once the body + of the SIP response is calculated. + + Therefore, a value of "auth-int" in the Digest-QoP AVP of the + SIP-Authentication-Info AVP indicates that the Diameter client (SIP + server) MUST compute the Digest "rspauth" parameter value at the + Diameter client (SIP server). + +9.5.6. Digest AVPs + + The following AVPs are RADIUS attributes defined in the RADIUS + Extension for Digest Authentication [RFC4590] and imported by this + specification: Digest-AKA-Auts, Digest-Algorithm, Digest-Auth-Param, + Digest-CNonce, Digest-Domain, Digest-Entity-Body-Hash, Digest-HA1, + Digest-Method, Digest-Nextnonce, Digest-Nonce, Digest-Nonce-Count, + Digest-Opaque, Digest-QoP, Digest-Realm, Digest-Response, + Digest-Response-Auth, Digest-URI, Digest-Username, and Digest-Stale. + +9.5.6.1. Considerations about Digest-HA1 AVP + + The Digest-HA1 AVP contains the value, pre-calculated at the Diameter + server, of H(A1) as defined in RFC 2617 [RFC2617]. The Diameter + client can use H(A1) to calculate the expected Digest response, + according to this challenge. If the SIP UA is in possession of the + credentials, the calculated expected response and the response sent + from the SIP UA will match. The Diameter server MAY include this AVP + to enable and assist the SIP server in authenticating the SIP UA. + + This scenario is not applicable when the Diameter server is + configured to use a session MD5 (MD5-sess) algorithm, because the + + + +Garcia-Martin, et al. Standards Track [Page 53] + +RFC 4740 Diameter SIP Application November 2006 + + + Diameter server requires the client nonce to compute the H(A1) before + sending it to the Diameter client, and the client nonce might not be + available when the computation of H(A1) is done. Therefore, if the + final authentication is delegated to the Diameter client, it is + RECOMMENDED to configure the Diameter server to use algorithms + different than MD5-sess in HTTP Digest. + + It is up to the Diameter server to include a Digest-HA1 AVP. The + Diameter server calculates the Digest H(A1) with the username, + password, and realm (and nonce and cnonce, if applicable) as inputs, + and places the result in the Digest-HA1 AVP value. For more details + of the A1 computation, see RFC 2617 [RFC2617] Section 3.2.2.2. The + Diameter client can calculate the Digest expected response with H(A1) + as input, as described in RFC 2617 [RFC2617] Section 3.2.2. + + Section 11 provides further normative details about the usage of the + Digest-HA1 AVP. + +9.5.6.2. Considerations about Digest-Entity-Body-Hash AVP + + The Digest-Entity-Body-Hash AVP contains a hash of the entity body + contained in the SIP message. This hash is required by HTTP Digest + with quality of protection set to "auth-int". Diameter clients MUST + use this AVP to transport the hash of the entity body when HTTP + Digest is the authentication mechanism and the Diameter server + requires verification of the integrity of the entity body (e.g., qop + parameter set to "auth-int"). + + The clarifications described in Section 22.4 of RFC 3261 [RFC3261] + about the hash of empty entity bodies apply to the + Digest-Entity-Body-Hash AVP. + +9.5.6.3. Considerations about Digest-Auth-Param AVP + + The Digest-Auth-Param AVP is the mechanism whereby the Diameter + client and Diameter server can exchange possible extension parameters + contained in Digest headers that are either not understood by the + Diameter client or for which there are no corresponding stand-alone + AVPs. Unlike the previously listed Digest-* AVPs, the + Digest-Auth-Param contains not only the value, but also the parameter + name, since it is unknown to the Diameter client. The Diameter node + MUST insert one Digest parameter/value combination per AVP value. If + the Digest header contains several unknown parameters, then the + Diameter implementation MUST repeat this AVP and each instance MUST + contain one different unknown Digest parameter/value combination. + This AVP corresponds to the "auth-param" parameter defined in Section + 3.2.1 of RFC 2617 [RFC2617]. + + + + +Garcia-Martin, et al. Standards Track [Page 54] + +RFC 4740 Diameter SIP Application November 2006 + + + Example: Assume that the Diameter server wants the SIP server to send + a "foo" parameter with the value set to "bar", so that the SIP server + sends that combination in a SIP WWW-Authenticate header field. The + Diameter server builds a grouped SIP-Authenticate AVP that contains a + Digest-Auth-Param whose value is set to foo="bar". Then the SIP + server creates the WWW-Authenticate header field with all the digest + parameters (received in Digest-* AVPs) and adds the foo="bar" + parameter to that header field. + +9.6. SIP-Number-Auth-Items AVP + + The SIP-Number-Auth-Items AVP (AVP Code 382) is of type Unsigned32 + and indicates the number of authentication and/or authorization + credentials that the Diameter server included in a Diameter message. + + When the AVP is present in a request, it indicates the number of + SIP-Auth-Data-Items the Diameter client is requesting. This can be + used, for instance, when the SIP server is requesting several + pre-calculated authentication credentials. In the answer message, + the SIP-Number-Auth-Items AVP indicates the actual number of items + that the Diameter server included. + +9.7. SIP-Deregistration-Reason AVP + + The SIP-Deregistration-Reason AVP (AVP Code 383) is of type Grouped + and indicates the reason for a deregistration operation. + + The SIP-Deregistration-Reason AVP is defined as follows (per the + grouped-avp-def of RFC 3588 [RFC3588]): + + SIP-Deregistration-Reason ::= < AVP Header: 383 > + { SIP-Reason-Code } + [ SIP-Reason-Info ] + * [ AVP ] + +9.7.1. SIP-Reason-Code AVP + + The SIP-Reason-Code AVP (AVP Code 384) is of type Enumerated and + defines the reason for the network initiated deregistration. The + following values are defined: + + o PERMANENT_TERMINATION (0) + o NEW_SIP_SERVER_ASSIGNED (1) + o SIP_SERVER_CHANGE (2) + o REMOVE_SIP_SERVER (3) + + + + + + +Garcia-Martin, et al. Standards Track [Page 55] + +RFC 4740 Diameter SIP Application November 2006 + + +9.7.2. SIP-Reason-Info AVP + + The SIP-Reason-Info AVP (AVP Code 385) is of type UTF8String and + contains textual information that can be rendered to the user, about + the reason for a deregistration. + +9.8. SIP-AOR AVP + + The SIP-AOR AVP is a RADIUS attribute imported from the RADIUS + Extension for Digest Authentication [RFC4590] namespace, allowing a + smooth transition between RADIUS and Diameter applications supporting + SIP. The SIP-AOR AVP carries the URI of the intended user related to + the SIP request (whose location in SIP may vary depending on the + actual SIP request and whether the SIP server is acting on Diameter + due to a SIP-originated or terminating requests). + + The Diameter client (SIP server) uses the value found in a SIP + Request-URI or a header field value of the SIP request to construct + the SIP-AOR AVP. The selection of a Request-URI or a particular + header field to create the value of the SIP-AOR AVP depends on the + semantics of the SIP message and whether the SIP server is acting for + originating or terminating requests. For instance, when the SIP + server receives an INVITE request addressed to the served user (e.g., + the SIP server is receiving a terminating SIP request), it maps the + SIP Request-URI of the SIP request to this AVP. However, when the + SIP server receives an INVITE request originated by the served user, + it can map either the P-Asserted-Identity or the From header field + values to this AVP. If the SIP server is acting as a SIP registrar, + then it maps the To header field of the REGISTER request to the + SIP-AOR AVP. + +9.9. SIP-Visited-Network-Id AVP + + The SIP-Visited-Network-Id AVP (AVP Code 386) is of type UTF8String. + This AVP contains an identifier that helps the home network identify + the visited network (e.g., the visited network domain name), in order + to authorize roaming to that visited network. + +9.10. SIP-User-Authorization-Type AVP + + The SIP-User-Authorization-Type AVP (AVP Code 387) is of type + Enumerated and indicates the type of user authorization being + performed in a User Authorization operation, i.e., the Diameter + User-Authorization-Request (UAR) command. The following values are + defined: + + + + + + +Garcia-Martin, et al. Standards Track [Page 56] + +RFC 4740 Diameter SIP Application November 2006 + + + o REGISTRATION (0) + This value is used for initial registration or re-registration. + This is the default value. + + o DEREGISTRATION (1) + This value is used for deregistration. + + o REGISTRATION_AND_CAPABILITIES (2) + This value is used for initial registration or re-registration + when the SIP server explicitly requests the Diameter server to get + capability information. This capability information helps the SIP + server to allocate another SIP server to serve the user. + +9.11. SIP-Supported-User-Data-Type AVP + + The SIP-Supported-User-Data-Type AVP (AVP Code 388) is of type + UTF8String and contains a string that identifies the type of + supported user data (user profile, see SIP-User-Data AVP + (Section 9.12)) supported in the node. The AVP can be repeated, if + the SIP server supports several user data types. In case of + repetition, the Diameter client should order the different instances + of this AVP according to its preferences. + + When the Diameter client inserts this AVP in a SAR message, it allows + the Diameter client to provide an indication to the Diameter server + of the types of user data supported by the SIP server. The Diameter + server, upon inspection of these AVPs, will return a suitable + SIP-User-Data AVP (Section 9.12) of the type indicated in the + SIP-User-Data-Type AVP (Section 9.12.1). + +9.12. SIP-User-Data AVP + + The SIP-User-Data AVP (AVP Code 389) is of type Grouped. This AVP + allows the Diameter server to transport user-specific data, such as a + user profile, to the SIP server (in the Diameter client). The + Diameter server selects a type of user data that is understood by the + SIP server in the Diameter client, and has been indicated in a + SIP-Supported-User-Data-Type AVP. In case the Diameter client + indicated support for several types of user data, the Diameter server + SHOULD choose the first type supported by the client. + + The SIP-User-Data grouped AVP contains a SIP-User-Data-Type AVP that + indicates the type of user data included in the + SIP-User-Data-Contents-AVP. + + The SIP-User-Data AVP is defined as follows (per the grouped-avp-def + of RFC 3588 [RFC3588]): + + + + +Garcia-Martin, et al. Standards Track [Page 57] + +RFC 4740 Diameter SIP Application November 2006 + + + SIP-User-Data ::= < AVP Header: 389 > + { SIP-User-Data-Type } + { SIP-User-Data-Contents } + * [ AVP ] + +9.12.1. SIP-User-Data-Type AVP + + The SIP-User-Data AVP (AVP Code 390) is of type UTF8String and + contains a string that identifies the type of user data included in + the SIP-User-Data AVP (Section 9.12). + + This document does not specify a convention to characterize the type + of user data contained in the SIP-User-Data AVP (Section 9.12). It + is believed that in most cases this feature will be used in + environments controlled by a network administrator who can configure + both the client and server to assign the same value type at the + client and server. It is also RECOMMENDED that organizations + developing their own profile of SIP-User-Data AVP (Section 9.12) + allocate a type based on their canonical DNS name. For instance, + organization "example.com" can define several types of SIP-User-Data + and allocate the types "type1.dsa.example.com", + "type2.dsa.example.com", and so on. This convention will avoid a + clash in the allocation of types of SIP-User-Data AVP (Section 9.12). + +9.12.2. SIP-User-Data-Contents AVP + + The SIP-User-Data-Contents AVP (AVP Code 391) is of type OctetString. + The Diameter peers do not need to understand the value of this AVP. + + The AVP contains the user profile data required for a SIP server to + give service to the user. + +9.13. SIP-User-Data-Already-Available AVP + + The SIP-User-Data-Already-Available AVP (AVP Code 392) is of type + Enumerated and gives an indication to the Diameter server about + whether the Diameter client (SIP server) already received the portion + of the user profile needed in order to serve the user. The following + values are defined: + + o USER_DATA_NOT_AVAILABLE (0) + The Diameter client (SIP server) does not have the data that it + needs to serve the user. + + o USER_DATA_ALREADY_AVAILABLE (1) + The Diameter client (SIP server) already has received the data + that it needs to serve the user. + + + + +Garcia-Martin, et al. Standards Track [Page 58] + +RFC 4740 Diameter SIP Application November 2006 + + +9.14. SIP-Method AVP + + The SIP-Method-AVP (AVP Code 393) is of type UTF8String and contains + the method of the SIP request that triggered the Diameter message. + The Diameter server MUST use this AVP solely for authorization of SIP + requests, and MUST NOT use it to compute the Digest authentication. + To compute the Digest authentication, the Diameter server MUST use + the Digest-Method AVP instead. + +10. New Values for Existing AVPs + + This section defines new values that the Diameter SIP application + extends to already existing AVPs. + +10.1. Extension to the Result-Code AVP Values + + The Result-Code AVP is already defined in RFC 3588 [RFC3588]. In + addition to the values already defined in RFC 3588 [RFC3588], the + Diameter SIP application defines the following new Result-Code AVP + values: + +10.1.1. Success Result-Code AVP Values + + A Diameter peer uses Result-Code AVP values that fall into the + success category to inform the remote peer that a request has been + successfully completed. + + o DIAMETER_FIRST_REGISTRATION 2003 + The user was not previously registered. The Diameter server has + now authorized the registration. + + o DIAMETER_SUBSEQUENT_REGISTRATION 2004 + The user is already registered. The Diameter server has now + authorized the re-registration. + + o DIAMETER_UNREGISTERED_SERVICE 2005 + The user is not currently registered, but the requested service + can still be granted to the user. + + o DIAMETER_SUCCESS_SERVER_NAME_NOT_STORED 2006 + The request operation was successfully processed. The Diameter + server does not keep a record of the SIP server address assigned + to the user. + + o DIAMETER_SERVER_SELECTION 2007 + The Diameter server has authorized the registration. The user has + already been assigned a SIP server, but it may be necessary to + select a new SIP server for the user. + + + +Garcia-Martin, et al. Standards Track [Page 59] + +RFC 4740 Diameter SIP Application November 2006 + + + o DIAMETER_SUCCESS_AUTH_SENT_SERVER_NOT_STORED 2008 + The requested operation was successfully executed. The Diameter + server is sending a number of authentication credentials in the + answer message. The Diameter server does not keep a record of the + SIP server. + +10.1.2. Transient Failures Result-Code AVP Values + + A Diameter peer uses a Result-Code AVP value that falls in the + transient failures category to inform the remote peer that a request + could not be satisfied at the time it was received, but it MAY be + satisfied by the Diameter peer in the future. + + o DIAMETER_USER_NAME_REQUIRED 4013 + The Diameter request did not contain a User-Name AVP, which is + required to complete the transaction. The Diameter peer MAY + include a User-Name AVP and attempt the request again. + +10.1.3. Permanent Failures Result-Code AVP Values + + A Diameter peer uses a Result-Code AVP value that falls into the + permanent failure category to inform the remote peer that the request + failed and should not be attempted again. + + o DIAMETER_ERROR_USER_UNKNOWN 5032 + The SIP-AOR AVP value does not belong to a known user in this + realm. + + o DIAMETER_ERROR_IDENTITIES_DONT_MATCH 5033 + The value in one of the SIP-AOR AVPs is not allocated to the user + specified in the User-Name AVP. + + o DIAMETER_ERROR_IDENTITY_NOT_REGISTERED 5034 + A query for location information is received for a SIP AOR that + has not been registered before. The user to which this identity + belongs cannot be given service in this situation. + + o DIAMETER_ERROR_ROAMING_NOT_ALLOWED 5035 + The user is not allowed to roam to the visited network. + + o DIAMETER_ERROR_IDENTITY_ALREADY_REGISTERED 5036 + The identity being registered has already been assigned a server + and the registration status does not allow that it is overwritten. + + o DIAMETER_ERROR_AUTH_SCHEME_NOT_SUPPORTED 5037 + The authentication scheme indicated in an authentication request + is not supported. + + + + +Garcia-Martin, et al. Standards Track [Page 60] + +RFC 4740 Diameter SIP Application November 2006 + + + o DIAMETER_ERROR_IN_ASSIGNMENT_TYPE 5038 + The SIP server address sent in the SIP-Server-URI AVP value of the + Diameter Server-Assignment-Request (SAR) command is the same SIP + server address that is currently assigned to the user name, but + the SIP-Server-Assignment-Type AVP is not allowed. For example, + the user is registered and the Server-Assignment-Request indicates + the assignment for an unregistered user. + + o DIAMETER_ERROR_TOO_MUCH_DATA 5039 + The Diameter peer in the SIP server receives more data than it can + accept. The SIP server cannot overwrite the already stored data. + + o DIAMETER_ERROR_NOT SUPPORTED_USER_DATA 5040 + The SIP server informs the Diameter server that the received + subscription data contained information that was not recognized or + supported. + +11. Authentication Details + + Authenticating a user can occur through various mechanisms. + Currently HTTP Digest authentication is supported. The actual + authentication is performed in either the SIP server or the Diameter + server. + + If the Diameter server wants to assure that authentication will take + place in the Diameter server (as opposed to a delegated + authentication taking place in the SIP server), it MUST NOT include a + Digest-HA1 AVP (part of the grouped SIP-Authenticate AVP, which in + turn is part of the SIP-Auth-Data-Item AVP) in a MAA message. The + Diameter server MAY include a pre-calculated Digest-HA1 AVP in the + MAA message if it wants to delegate authentication of the user to the + SIP server. + + Note that on systems where the SIP User Agent is using HTTP Digest + authentication [RFC2617] inside of Transport Layer Security (TLS) + [RFC4346], where only the SIP proxy server has a certificate, + delegating authentication to the SIP server (by making Digest-HA1 + available to the SIP server) might reduce the load on the Diameter + server. + + When requesting authentication, the Diameter client indicates in the + SIP-Number-Auth-Items AVP value of a Diameter MAR message how many + authentication credentials are being requested. In the Diameter MAA + message, the Diameter server MAY include more than one + SIP-Auth-Data-Item AVP, but it is only useful for the Diameter client + if the Digest-QoP AVP was set to 'auth-int' (in the MAR message), and + if future authentications will have the same realm. When including + more than one SIP-Auth-Data-Item AVP, the Diameter server SHOULD + + + +Garcia-Martin, et al. Standards Track [Page 61] + +RFC 4740 Diameter SIP Application November 2006 + + + indicate how many instances of SIP-Auth-Data-Item AVPs are present + with the SIP-Number-Auth-Items AVP. This number may be different + from the one requested in the Diameter MAR message. If multiple + SIP-Auth-Data-Item AVPs are present, and their ordering is + significant, the Diameter server MUST include a SIP-Item-Number AVP + in each grouping to indicate the order. The + SIP-Authentication-Scheme AVP indicates "Digest" and the + SIP-Authenticate AVP contains data (typically a challenge of some + kind) that the user can use for her authentication. The grouped + SIP-Authorization AVP contains the AVPs that conform to the response + expected from the user. + + If the Diameter server performs the authentication of the user, the + Diameter MAR message that the Diameter client sends to the Diameter + server MUST include all the authentication credentials supplied by + the SIP UA (there might be more than one credential, e.g., different + realms, authentication of proxies, etc.). Each credential is + inserted in a grouped SIP-Authorization AVP (part of the grouped + SIP-Auth-Data-Item AVP). The Diameter client MUST insert a + SIP-Number-Auth-Items AVP with the value set to the number of + credentials enclosed. If necessary, the Digest-Entity-Body-Hash AVP + will contain a hash of the body, needed to perform the + authentication. If the authentication is successful, the Diameter + MAA message will contain a Result-Code AVP indicating success, and if + necessary, the Diameter server MAY include one or more + SIP-Auth-Data-Item AVPs to provide further authentication credentials + to the SIP server. If the authentication is unsuccessful due to + missing credentials, the Diameter MAA message will include a + SIP-Auth-Data-Item AVP with the SIP-Authentication-Scheme and + SIP-Authenticate AVPs containing data (typically a challenge of some + kind) that the user can use to authenticate itself. + + There are situations where a SIP request traverses several proxies, + and each of the proxies requests to authenticate the SIP UA. In this + situation, it is a valid scenario that a SIP request received at a + SIP server contains several sets of credentials. The 'realm' + directive in HTTP is the key that the Diameter client can use to + determine which credential is applicable. Also, none of the realms + may be of interest to the Diameter client, in which case the Diameter + client MUST consider that no credentials (of interest) were sent. In + any case, a Diameter client MUST send zero or exactly one credential + to the Diameter server. The Diameter client MUST choose the + credential based on the 'realm' directive in the + Authorization/Proxy-Authorization header field, and it MUST match the + realm of the Diameter client. + + It must be noted that nonces are always generated in the Diameter + server. + + + +Garcia-Martin, et al. Standards Track [Page 62] + +RFC 4740 Diameter SIP Application November 2006 + + +12. Migration from RADIUS + + RADIUS offers support for HTTP Digest authentication in the RADIUS + Extension for Digest Authentication [RFC4590]. A number of AVPs (the + Digest-* AVPs) of this Diameter SIP application are imported from the + RADIUS attributes namespace, thus making the migration from RADIUS to + Diameter smooth. + + Note that the RADIUS Extension for Digest Authentication [RFC4590] + provides a more limited scope than this Diameter SIP application. + Specifically, the RADIUS extension for Digest Authentication merely + provides support for HTTP Digest authentication, whereas the Diameter + SIP application provides support for user location, profile + downloading and update, etc. + + The following sections discuss several configurations in which a + gateway translates RADIUS to Diameter and vice versa. + +12.1. Gateway from RADIUS Client to Diameter Server + + The gateway maps Access-Request messages to MAR request. If a RADIUS + Access-Request message contains at least one Digest-* attribute, the + gateway maps all Digest-* attributes to the AVPs of a Diameter + SIP-Authorization AVP, constructs a MAR message, and sends it to the + Diameter server. If the RADIUS Access-Request message does not + contain any Digest-* attribute, then the RADIUS client does not want + to apply HTTP Digest authentication, in which case, actions at the + gateway are outside the scope of this document. + + The Diameter server responds with a MAA message. If the MAA message + contains a Result-Code AVP set to the value DIAMETER_MULTI_ROUND_AUTH + and contains challenge parameters in a SIP-Authenticate AVP, then the + gateway translates the AVPs of SIP-Authenticate AVP and puts the + resulting RADIUS attributes into an Access-Challenge message. It + sends the Access-Challenge message to the RADIUS client. + + If the MAA message contains a SIP-Authentication-Info and a + Digest-Response AVP, the gateway converts these AVPs to the + corresponding RADIUS attributes and constructs a RADIUS message. If + the Result-Code AVP is DIAMETER_SUCCESS, an Access-Accept is sent. + In all other cases, an Access-Reject is sent. + +12.2. Gateway from Diameter Client to RADIUS Server + + The Diameter client sends a Diameter MAR message to the gateway. If + the MAR message does not contain SIP-Auth-Data-Item AVPs, the gateway + constructs an Access-Request message and maps the SIP-AOR and + SIP-Method AVPs to RADIUS attributes. The gateway sends the + + + +Garcia-Martin, et al. Standards Track [Page 63] + +RFC 4740 Diameter SIP Application November 2006 + + + Access-Request message to the RADIUS server, which will respond with + an Access-Challenge. The gateway creates a MAA message with a + Result-Code AVP set to DIAMETER_MULTI_ROUND_AUTH and maps the + Digest-* attributes to Diameter AVPs in a SIP-Authenticate AVP. The + gateway sends the resulting MAA to the Diameter client, which will + respond with a new MAR. + + The gateway checks the SIP-Auth-Data-Item AVPs of this MAR for an AVP + where the Digest-Realm AVP matches the locally configured realm + value. It takes the AVPs from this SIP-Auth-Data-Item AVP, converts + them into the corresponding RADIUS attributes and constructs a RADIUS + Access-Request message. The gateway sends the Access-Request message + to the RADIUS server. If the RADIUS server responds with an + Access-Accept message, the gateway converts the RADIUS attributes to + Diameter AVPs, constructs a MAA message with a Result-Code AVP set to + DIAMETER_SUCCESS and sends this message to the Diameter client. If + the RADIUS server responds with an Access-Reject message, the gateway + converts the RADIUS attributes to Diameter AVPs, constructs a MAA + message with a Result-Code AVP set to + DIAMETER_ERROR_IDENTITIES_DONT_MATCH, and sends this message to the + Diameter client. + +12.3. Known Limitations + + As mentioned earlier, there is not a 100% match between the Diameter + SIP application and the RADIUS Extension for Digest Authentication + [RFC4590]. In particular, the RADIUS Extension for Digest + Authentication [RFC4590] does not offer equivalent functionality to + the Diameter UAR/UAA, SAR/SAA, LIR/LIA, RTR/RTA, and PPR/PPA messages + defined by this specification. + +13. IANA Considerations + + This document serves as IANA registration request for a number of + items that should be registered in the AAA parameters registry. + +13.1. Application Identifier + + This document defines a standards-track Application-ID that falls + into the Application Identifier standards-track address space defined + by RFC 3588 [RFC3588] Section 11.3. This Application-ID has been + registered in the Application IDs sub-registry of the AAA parameters + registry with the following data: + + ID values Name Reference + ----------- ------------------------ --------- + 6 Diameter Session Initiation RFC 4740 + Protocol (SIP) Application + + + +Garcia-Martin, et al. Standards Track [Page 64] + +RFC 4740 Diameter SIP Application November 2006 + + +13.2. Command Codes + + This document defines new standard commands whose Command Codes are + to be allocated within the standard permanent Command Codes address + space defined in RFC 3588 [RFC3588] Section 11.2.1. These command + codes should be registered in the Command Codes sub-registry of the + AAA parameters registry. + + Table 1 in Section 8 contains the detailed list of Command Code names + and values that are part of this Diameter application. + +13.3. AVP Codes + + This document defines new standard AVPs, whose AVP Codes are to be + allocated within the AVP Codes address space defined in RFC 3588 + [RFC3588] Section 11.4. These AVP codes have been registered in the + AVP Codes sub-registry of the AAA parameters registry. + + Table 2 in Section 9 contains the detailed list of AVP names and AVP + codes that are part of this Diameter application. + +13.4. Additional Values for the Result-Code AVP Value + + This document defines new standard Result-Code AVP values to be + allocated within the Result-Code AVP address space defined in RFC + 3588 [RFC3588] Section 14.4.1. These values are listed in the + Result-Code AVP values section of the AVP Specific Values + sub-registry of the AAA parameters registry. + + Section 10.1.1 lists the new Result-Code AVP values that fall into + the success category, according to RFC 3588 [RFC3588] Section 7.1.2. + + Section 10.1.2 lists the new Result-Code AVP values that fall into + the transient failures category, according to RFC 3588 [RFC3588] + Section 7.1.4. + + Section 10.1.3 lists the new Result-Code AVP values that fall into + the permanent failures category, according to RFC 3588 [RFC3588] + Section 7.1.5. + + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 65] + +RFC 4740 Diameter SIP Application November 2006 + + +13.5. Creation of the SIP-Server-Assignment-Type Section in the AAA + Registry + + This document defines a new SIP-Server-Assignment-Type AVP (see + Section 9.4). This AVP is of type Enumerated. We define an initial + set of values that should be registered by IANA. IANA should create + a new "SIP-Sever-Assignment-Type AVP values" section under the AVP + Specific Values sub-registry of the AAA parameters registry. The + initial list of values is listed in Section 9.4. + +13.6. Creation of the SIP-Authentication-Scheme Section in the AAA + Registry + + This document defines a new SIP-Authentication-Scheme AVP (see + Section 9.5.1). This AVP is of type Enumerated. We currently define + a single value that should be registered by IANA. IANA should create + a new "SIP-Authentication-Scheme AVP values" section under the AVP + Specific Values sub-registry of the AAA parameters registry. The + initial list of values is included in Section 9.5.1. + +13.7. Creation of the SIP-Reason-Code Section in the AAA Registry + + This document defines a new SIP-Reason-Code AVP (see Section 9.7.1). + This AVP is of type Enumerated. We define an initial set of values + that should be registered by IANA. IANA should create a new + "SIP-Reason-Code AVP values" section under the AVP Specific Values + sub-registry of the AAA parameters registry. The initial list of + values is listed in Section 9.7.1. + +13.8. Creation of the SIP-User-Authorization-Type Section in the AAA + Registry + + This document defines a new SIP-User-Authorization-Type AVP (see + Section 9.10). This AVP is of type Enumerated. We define an initial + set of values that should be registered by IANA. IANA should create + a new "SIP-User-Authorization-Type AVP values" section under the AVP + Specific Values sub-registry of the AAA parameters registry. The + initial list of values is listed in Section 9.10. + +13.9. Creation of the SIP-User-Data-Already-Available Section in the + AAA Registry + + This document defines a new SIP-User-Data-Already-Available AVP (see + Section 9.13). This AVP is of type Enumerated. We define an initial + set of values which should be registered by IANA. IANA should create + a new "SIP-User-Data-Already-Available AVP values" section under the + AVP Specific Values sub-registry of the AAA parameters registry. The + initial list of values is listed in Section 9.13. + + + +Garcia-Martin, et al. Standards Track [Page 66] + +RFC 4740 Diameter SIP Application November 2006 + + +14. Security Considerations + + This memo does not describe a stand-alone protocol, but a particular + application for the Diameter protocol [RFC3588]. Consequently, all + the security considerations applicable to Diameter automatically + apply to this memo. In particular, Section 13 of RFC 3588 applies to + this memo. + + This Diameter SIP application allows a Diameter client to use the + properties of HTTP Digest authentication [RFC2617] by evaluating or + sending to the Diameter server the credentials supplied by a user. + The discussion of HTTP Digest authentication in Section 4 of RFC 2617 + [RFC2617] is also applicable to this memo. + + This Diameter SIP application also allows a Diameter client to use + the properties of HTTP Digest authentication using AKA [RFC3310] by + evaluating or sending to the Diameter server the credentials supplied + by a user. Section 5 of RFC 3310 [RFC3310] is also applicable to + this memo. + +14.1. Final Authentication Check in the Diameter Client/SIP Server + + The Diameter SIP application can be configured to operate in a + scenario where the final authentication check is performed in the + Diameter client (SIP server). There are a number of security + considerations associated to it; all of them are consequences of the + requirement to transfer H(A1) from the Diameter server to the + Diameter client: + + o Both Diameter client and server must trust each other, such as + when both client and server belong to the same administrative + domain. + + o To avoid eavesdroppers, the transport protocol between the + Diameter client and server MUST be secured. RFC 3588 [RFC3588] + specifies TLS [RFC4346] and IPsec as possible transport protection + mechanisms for Diameter. + + Due to these security considerations, it is RECOMMENDED to configure + the Diameter SIP application to operate in the mode where the final + authentication check is performed in the Diameter server. + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 67] + +RFC 4740 Diameter SIP Application November 2006 + + +15. Contributors + + The authors would like to thank the following contributors who made + substantial contributions to this work: + + Pete McCann Lucent + + Jaakko Rajaniemi Nokia + + Wolfgang Beck (Deutsche Telekom AG) provided the text in Section 12, + "Migration from RADIUS". + +16. Acknowledgements + + The authors would like to thank Tony Johansson and Kevin Purser for + their invaluable contribution to the start-up of this application and + the continuous progress. The authors would like to thank Daniel + Warren, Jayshree Bharatia, Kuntal Chowdhury, Jari Arkko, Avi Lior, + Wolfgang Beck, Ulrich Wiehe, Cullen Jennings, Anu Leinonen, Glen + Zorn, German Blanco, Mikko Aittola, Bert Wijnen, and Sam Hartman for + their reviews and valuable comments. + + The Diameter SIP application is based on the Diameter application for + the Cx interface of the 3GPP IP Multimedia Subsystem [3GPP.29.229]. + The authors would like to thank 3GPP Working Group CN4 for this work. + +17. References + +17.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC2617] Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, + S., Leach, P., Luotonen, A., and L. Stewart, "HTTP + Authentication: Basic and Digest Access + Authentication", RFC 2617, June 1999. + + [RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., + Johnston, A., Peterson, J., Sparks, R., Handley, M., + and E. Schooler, "SIP: Session Initiation Protocol", + RFC 3261, June 2002. + + [RFC3310] Niemi, A., Arkko, J., and V. Torvinen, "Hypertext + Transfer Protocol (HTTP) Digest Authentication Using + Authentication and Key Agreement (AKA)", RFC 3310, + September 2002. + + + + +Garcia-Martin, et al. Standards Track [Page 68] + +RFC 4740 Diameter SIP Application November 2006 + + + [RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and + J. Arkko, "Diameter Base Protocol", RFC 3588, + September 2003. + + [RFC4590] Sterman, B., Sadolevsky, D., Schwartz, D., Williams, + D., and W. Beck, "RADIUS Extension for Digest + Authentication", RFC 4590, July 2006. + +17.2. Informative References + + [RFC4346] Dierks, T. and E. Rescorla, "The Transport Layer + Security (TLS) Protocol Version 1.1", RFC 4346, April + 2006. + + [RFC3263] Rosenberg, J. and H. Schulzrinne, "Session Initiation + Protocol (SIP): Locating SIP Servers", RFC 3263, + June 2002. + + [RFC3680] Rosenberg, J., "A Session Initiation Protocol (SIP) + Event Package for Registrations", RFC 3680, + March 2004. + + [RFC3880] Lennox, J., Wu, X., and H. Schulzrinne, "Call + Processing Language (CPL): A Language for User Control + of Internet Telephony Services", RFC 3880, + October 2004. + + [RFC4004] Calhoun, P., Johansson, T., Perkins, C., Hiller, T., + and P. McCann, "Diameter Mobile IPv4 Application", + RFC 4004, August 2005. + + [RFC4005] Calhoun, P., Zorn, G., Spence, D., and D. Mitton, + "Diameter Network Access Server Application", + RFC 4005, August 2005. + + [RFC4006] Hakala, H., Mattila, L., Koskinen, J-P., Stura, M., + and J. Loughney, "Diameter Credit-Control + Application", RFC 4006, August 2005. + + [3GPP.29.229] 3GPP, "Cx and Dx interfaces based on the Diameter + protocol; Protocol details", 3GPP TS 29.229 5.12.0, + June 2006. + + [JSR-000116] Java Community Process, "SIP Servlet API Specification + 1.0 Final Release", JSR 000116, March 2003. + + + + + + +Garcia-Martin, et al. Standards Track [Page 69] + +RFC 4740 Diameter SIP Application November 2006 + + +Authors' Addresses + + Miguel A. Garcia-Martin (Editor) + Nokia + P.O. Box 407 + NOKIA GROUP, FIN 00045 + Finland + + Phone: +358 50 480 4586 + EMail: miguel.an.garcia@nokia.com + + + Maria-Carmen Belinchon + Ericsson + Via de los Poblados 13 + Madrid 28033 + Spain + + Phone: +34 91 339 3535 + EMail: maria.carmen.belinchon@ericsson.com + + + Miguel A. Pallares-Lopez + Ericsson + Via de los Poblados 13 + Madrid 28033 + Spain + + Phone: +34 91 339 4222 + EMail: miguel-angel.pallares@ericsson.com + + + Carolina Canales-Valenzuela + Ericsson + Via de los Poblados 13 + Madrid 28033 + Spain + + Phone: +34 91 339 2680 + EMail: carolina.canales@ericsson.com + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 70] + +RFC 4740 Diameter SIP Application November 2006 + + + Kalle Tammi + Nokia + P.O.Box 785 + Tampere 33101 + Finland + + Phone: +358 40 505 8670 + EMail: kalle.tammi@nokia.com + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Garcia-Martin, et al. Standards Track [Page 71] + +RFC 4740 Diameter SIP Application November 2006 + + +Full Copyright Statement + + Copyright (C) The IETF Trust (2006). + + This document is subject to the rights, licenses and restrictions + contained in BCP 78, and except as set forth therein, the authors + retain all their rights. + + This document and the information contained herein are provided on an + "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS + OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST, + AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT + THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY + IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR + PURPOSE. + +Intellectual Property + + The IETF takes no position regarding the validity or scope of any + Intellectual Property Rights or other rights that might be claimed to + pertain to the implementation or use of the technology described in + this document or the extent to which any license under such rights + might or might not be available; nor does it represent that it has + made any independent effort to identify any such rights. Information + on the procedures with respect to rights in RFC documents can be + found in BCP 78 and BCP 79. + + Copies of IPR disclosures made to the IETF Secretariat and any + assurances of licenses to be made available, or the result of an + attempt made to obtain a general license or permission for the use of + such proprietary rights by implementers or users of this + specification can be obtained from the IETF on-line IPR repository at + http://www.ietf.org/ipr. + + The IETF invites any interested party to bring to its attention any + copyrights, patents or patent applications, or other proprietary + rights that may cover technology that may be required to implement + this standard. Please address the information to the IETF at + ietf-ipr@ietf.org. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + +Garcia-Martin, et al. Standards Track [Page 72] + |