1 files changed, 271 insertions, 0 deletions
diff --git a/doc/rfc/rfc106.txt b/doc/rfc/rfc106.txt
new file mode 100644
index 0000000..d98981c
--- /dev/null
+++ b/doc/rfc/rfc106.txt
@@ -0,0 +1,271 @@
+
+
+
+
+
+
+NETWORK WORKING GROUP                                           NIC 5776
+Request for Comments #106                              Thomas O'Sullivan
+                                                                     RDS
+                                                            3 March 1971
+
+                       USER/SERVER SITE PROTOCOL
+                       NETWORK HOST QUESTIONNAIRE
+
+
+
+        The answer to a number of questions about the characteristics
+and operation of Network HOSTS will be useful to implementers of some
+early versions of TELNET, and/or to the USER/SERVER SITE PROTOCOL
+Committee in their consideration of a full TELNET PROTOCOL
+specification.
+
+
+        Questions of current interest are covered on the attached
+questionnaire.  The Technical Liaison contact at each HOST site is asked
+to review these questions and fill in the answers as soon as convenient
+after receipt.
+
+
+        One of the members of the committee listed below will contact
+each HOST site by telephone in the next few days to record the answers.
+
+   Committee members include:
+
+         Bob Long                   SDC
+
+         John Melvin                SRI/ARC
+
+         Ed Meyer                   MIT/MAC
+
+         Tom O'Sullivan             RDS
+
+
+        Results of the questionnaire will be tabulated and distributed
+as an RFC.
+
+
+
+
+
+
+
+
+
+
+
+
+                                                                [Page 1]
+
+                      NETWORK HOST QUESTIONNAIRE*
+
+                        For TELNET Consideration
+
+Installation __________________________  Prepared By _______________
+
+System**  _____________________________  Date  _____________________
+
+1.)    Does system operate on keyboard terminal input on one
+       character at a time (e.g. searching for a special
+       character other than end of line), or does it accumulate
+       a line at a time and operate on the line when a
+       special character is entered, e.g. Carriage Return (CR)?
+
+         [ ]  Line at time
+
+         [ ]  Character at time
+
+         [ ]  Both (Explain) __________________________________
+
+       _____________________________________________________________
+
+       _____________________________________________________________
+
+       _____________________________________________________________
+
+2.)    What maximum buffer size does your system provide for
+       input of a physical line from a keyboard terminal, and
+       for output to a terminal, printer, or screen?
+
+            Input______Char
+
+            Output_____Char
+
+       Remarks: ____________________________________________________
+
+       _____________________________________________________________
+
+       _____________________________________________________________
+
+       _____________________________________________________________
+
+=================
+ * If there is insufficient space on the questionnaire, continue
+   answers on back of page.
+
+** Fill out separate questionnaire for each HOST to be directly
+   interfaced to an IMP.
+
+
+
+                                                                [Page 2]
+
+Network HOST Questionnaire (Continued)
+
+3.)    Describe the effect in your system of use of the following
+       keying conventions.  Indicate how implemented, i.e. is there
+       a hardware interrupt?  Does the terminal respond?  How?
+       What is sent into system as data, what is echoed, etc.
+       If the key(s) are not available, so indicate (as may be
+       the case for Newline for some systems, line feed for 2741's,
+       etc.). If available but has no meaning, so indicate.
+
+       Key Strokes        Implementation           System Action
+
+          CR       __________________________   __________________
+
+          LF       __________________________   __________________
+
+          NL       __________________________   __________________
+
+        CR,LF      __________________________   __________________
+
+
+              Terminal Type =  __________________________
+
+
+       If appropriate, enter data for other terminal types on the
+       back of this page.
+
+
+4.)    What special character or characters are used in your
+       system to awaken some process during the entry of data
+       from a terminal (e.g. control C for some systems, break on
+       others, etc.)?
+
+       Character(s)                 Operation
+
+       ___________    ___________________________________________
+
+       ___________    ___________________________________________
+
+       ___________    ___________________________________________
+
+       ___________    ___________________________________________
+
+
+
+
+
+
+
+
+
+                                                                [Page 3]
+
+Network HOST Questionnaire (Continued)
+
+5.)    List the types of keyboard terminals and codes supported
+       by your system.
+
+       __________________________________________________________
+
+       __________________________________________________________
+
+       __________________________________________________________
+
+
+6.)    What internal code(s) is used in your system to represent
+       character sets?  If not ASCII nor EBCDIC, attach a copy of
+       the code.
+
+       __________________________________________________________
+
+       __________________________________________________________
+
+       __________________________________________________________
+
+
+7.)    For each terminal type do you support it in:
+
+       Half Duplex (Pure) _______________________________________
+
+       Half Duplex (with Break or Attention) ____________________
+
+       Half Duplex (Break & Reverse Break) ______________________
+
+       Full Duplex (without echo) _______________________________
+
+       Full Duplex (with echo) __________________________________
+
+
+8.)   For optional echo systems, at initial connect time
+      is the terminal assumed to require an echo?
+
+            [ ] Yes
+
+            [ ] No
+
+
+
+
+
+
+
+
+
+                                                                [Page 4]
+
+Network HOST Questionnaire (Continued)
+
+
+9.)   Does your system perform error detection (e.g. parity
+      check) on terminal input and, if so, is this a hardware
+      or software check?
+
+      _____________________________________________________________
+
+      _____________________________________________________________
+
+      _____________________________________________________________
+
+
+
+10.)   Does your system support punched paper tape input?  If so,
+       what sort of end of line sequence is used?
+
+       _____________________________________________________________
+
+       _____________________________________________________________
+
+       _____________________________________________________________
+
+       [ This RFC was put into machine readable form for entry ]
+            [ into the online RFC archives by S.M.H. 5/97 ]
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+                                                                [Page 5]
+