diff options
Diffstat (limited to 'doc/rfc/rfc247.txt')
-rw-r--r-- | doc/rfc/rfc247.txt | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/doc/rfc/rfc247.txt b/doc/rfc/rfc247.txt new file mode 100644 index 0000000..57e3209 --- /dev/null +++ b/doc/rfc/rfc247.txt @@ -0,0 +1,222 @@ + + + + + + +Network Working Group Peggy Karp +Request for Comments: #247 MITRE +NIC 7688 12 October 1971 +Categories: Policy, Telnet +Related: #226, 236, 239, 233, 237 +Obsoletes: #226 + + Proferred Set of Standard Host Names + + In RFC #226, BBN's TENEX list of Host names was set up as a strawman + set of standard Host names. Comments received since then (an RFC + actually generated comments!!!) have influenced me to propose the + following general rules for forming Host names. + + The Host names will be 8 characters in length. The general form is + + <site> '-' <machine> + + <site> will be at most 4 characters, formed as follows: + + (a) Use the keyword in the site name, if not more than + four characters, e.g., NASA Ames, Case Western + Reserve. ---- ---- + + (b) Use the standard acronym, if not more than four + characters, e.g., UCLA, RADC, NBS. + + (c) If a standard abbreviation exists, use it, e.g., Ill. + + (d) If none of the above apply, use the first four letters + in the site name, e.g., Burr, Mitr, Harv. + + (e) If none of the above is acceptable to the site, the + technical liaison should select the site mnemonic. + + <machine> will be at most 4 characters of the form <mfg. #> + <designator>. + Examples of mfg. # are: + + IBM 360 2 digit model number + IBM 370 3 digit model number + PDP 1 - 2 digit model number + Burroughs 4 digits + CDC 4 digits + etc. + + + + + + + + [Page 1] + +RFC #247 + + + <designator> will be used when more than one machine of the same + type is located at a site (e.g., 2 PDP-10s at MIT, at SRI, and + at BBN). + + Limiting <machine> to 4 characters does not permit distinctions + to be made between machines with 4 digit mfg. #s. I expect + the situation will be handled in an ad hoc manner by the NIC if + it arises. + + TIPs are identified as 'TIP' rather than by '316'. If a Host + is not to be permanently addressable, the machine is identified + as 'TEST'. + + A list of Host names, formed according to these rules, is + attached. Alternate Host names should be provided, as + suggested by Jon Postel (RFC #236). RFC's 206, 233, and + 236 present lists with 4-character alternate names. The + Technical Liaison should select the alternate name for his + site and communicate the selection to the NIC. + + + The preceding rules and the attached list of Host names are + subject to the approval of the NWG. Hereafter, the list will + be generated and maintained by the NIC in cooperation with + the Technical Liaison at each site, as suggested in RFC #237. + Comments should be addressed to Dick Watson. + + + + + + + + [ This RFC was put into machine readable form for entry ] + + [ into the online RFC archives by BBN Corp. under the ] + + [ direction of Alex McKenzie. 12/96 ] + + + + + + + + + + + + [Page 2] + +RFC #247 +Attachment 1 + + NETWORK ADDRESS STANDARD NAME + --------------- ------------- + 1 UCLA-7 + 65 UCLA-91 + 2 SRI-10NI + 66 SRI-10AI + 3 UCSB-75 + 4 UTAH-10 + 5 BBN-516 + 69 BBN-10A + 133 BBN-10B + 6 MIT-645 + 70 MIT-10DM + 134 MIT-10AI + 7 RAND-65 + 71 RAND-10 + 8 SDC-75 + 9 HARV-10 + 73 HARV-1 + 137 HARV-11 + 10 LL-67 + 74 LL-TX2 + 138 LL-TSP + 11 SAIL-10 + 12 ILL-11 + 76 ILL-6500 + 13 CASE-10 + 14 CMU-10 + 15 BURR-6500 + 79 BURR-TEST + 16 AMES-67 + 144 AMES-TIP + 145 MITR-TIP + 18 RADC-645 + 146 RADC-TIP + 19 NBS-11 + 147 NBS-TIP + 148 ETAC-TIP + 21 TINK-418 + 22 MCCL-418 + 23 USC-44 + 151 USC-TIP + 152 GWC-TIP + 25 NCAR-7600 + 153 NCAR-TIP + 158 BBNX-TEST + + + + [Page 3] + +RFC #247 +Attachment 2 + + An Implementation Scheme + +If the standard Host names are formed according to the proposed +rules, the following implementation scheme, suggested by Steve +Crocker, can be used. + + Map <site> into an 8-bit number, S and + map <machine> into an 8-bit number, M, + where + S + M = Network Address. + + S and M can be selected such that specification of <site> + alone could cause a default to the "primary" Host at + the site. Note that this scheme depends on a unique + <site> designator for each IMP. + +Some examples: + +If the "primary" Host at UCLA is the 91, let + UCLA -> S = X'41' + 7 -> M = X'40' + 91 -> M = X'00' +then for + UCLA-7, S + M = X'01' = 1 base 10 + UCLA-91,S + M = X'41' = 65 base 10 + +and + UCLA alone = X'41' = 65 base 10 + +If the primary Host at BBN is TENEX System A, let + BBN -> S = X'45' + 516 -> M = X'40' + 10A -> M = X'00' + 10B -> M = X'C0' +then for + BBN-516, S + M = X'05' = 5 base 10 + BBN-10A, S + M = X'45' = 69 base 10 + BBN-10B, S + M = X'85' = 133 base 10 + +and + BBN alone = X'45' = 69 base 10 + +The primary Host for each IMP would be designated by the +site and such information disseminated by the NIC. + + + + + + [Page 4] + |