diff options
Diffstat (limited to 'doc/rfc/rfc7388.txt')
-rw-r--r-- | doc/rfc/rfc7388.txt | 1515 |
1 files changed, 1515 insertions, 0 deletions
diff --git a/doc/rfc/rfc7388.txt b/doc/rfc/rfc7388.txt new file mode 100644 index 0000000..598c13d --- /dev/null +++ b/doc/rfc/rfc7388.txt @@ -0,0 +1,1515 @@ + + + + + + +Internet Engineering Task Force (IETF) J. Schoenwaelder +Request for Comments: 7388 A. Sehgal +Category: Standards Track Jacobs University +ISSN: 2070-1721 T. Tsou + C. Zhou + Huawei Technologies + October 2014 + + + Definition of Managed Objects for + IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs) + +Abstract + + This document defines a portion of the Management Information Base + (MIB) for use with network management protocols in the Internet + community. In particular, it defines objects for managing IPv6 over + Low-Power Wireless Personal Area Networks (6LoWPANs). + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 5741. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + http://www.rfc-editor.org/info/rfc7388. + +Copyright Notice + + Copyright (c) 2014 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. + + + + +Schoenwaelder, et al. Standards Track [Page 1] + +RFC 7388 LOWPAN-MIB October 2014 + + +Table of Contents + + 1. Introduction ....................................................2 + 2. The Internet-Standard Management Framework ......................2 + 3. Conventions .....................................................3 + 4. Overview ........................................................3 + 5. Relationship to Other MIB Modules ...............................7 + 6. Definitions .....................................................7 + 7. Security Considerations ........................................24 + 8. IANA Considerations ............................................25 + 9. References .....................................................25 + 9.1. Normative References ......................................25 + 9.2. Informative References ....................................26 + Acknowledgements ..................................................27 + Authors' Addresses ................................................27 + +1. Introduction + + This document defines a portion of the Management Information Base + (MIB) for use with network management protocols. In particular it + defines objects for managing IPv6 over Low-Power Wireless Personal + Area Networks (6LoWPANs) [RFC4944]. + + While a MIB module provides a direct binding for accessing data via + the Simple Network Management Protocol (SNMP) [RFC3410], supporting + SNMP may not always be affordable on constrained devices. Other + protocols to access data modeled in MIB modules are possible and + proposals have been made recently to provide bindings to the + Constrained Application Protocol (CoAP) [RFC7252]. + +2. The Internet-Standard Management Framework + + For a detailed overview of the documents that describe the current + Internet-Standard Management Framework, please refer to section 7 of + RFC 3410 [RFC3410]. + + Managed objects are accessed via a virtual information store, termed + the Management Information Base or MIB. MIB objects are generally + accessed through the Simple Network Management Protocol (SNMP). + Objects in the MIB are defined using the mechanisms defined in the + Structure of Management Information (SMI). This document specifies a + MIB module that is compliant to the SMIv2, which is described in STD + 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC + 2580 [RFC2580]. + + + + + + + +Schoenwaelder, et al. Standards Track [Page 2] + +RFC 7388 LOWPAN-MIB October 2014 + + +3. Conventions + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and + "OPTIONAL" in this document are to be interpreted as described in BCP + 14, RFC 2119 [RFC2119]. + +4. Overview + + The left part of Figure 1 provides an overview of the IETF protocols + designed for constrained devices. The right part lists the MIB + modules providing monitoring and troubleshooting support ([RFC4113], + [RFC4292], [RFC4293], and [RFC2863]). The LOWPAN-MIB defined in this + document fills a hole by providing monitoring and troubleshooting + support for the 6LoWPAN layer. + + Protocol Layer MIB Modules + +--------------------+ + | CoAP [RFC7252] | + +--------------------+ +--------------------------+ + | UDP [RFC0768] | | UDP-MIB [RFC4113] | + +--------------------+ +--------------------------+ + | IPv6 [RFC2460] | | IP-MIB [RFC4293] | + | ICMPv6 [RFC4443] | | IP-FORWARD-MIB [RFC4292] | + +--------------------+ +--------------------------+ + | 6LoWPAN [RFC4944] | | LOWPAN-MIB [RFC7388] | + +--------------------+ +--------------------------+ + | IF-MIB [RFC2863] | + +--------------------+ +--------------------------+ + | IEEE 802.15.4, ... | + +--------------------+ + + Figure 1: Protocol Layers and MIB Modules + + The LOWPAN-MIB module is primarily a collection of counters that + reflect how 6LoWPAN datagrams are processed by the 6LoWPAN layer. + The objects are defined twice: once to report the global statistics + as seen by the 6LoWPAN layer and once to report per-interface 6LoWPAN + layer statistics. The per-interface statistics are optional to + implement. The object identifier registration tree has the following + structure: + + + + + + + + + + +Schoenwaelder, et al. Standards Track [Page 3] + +RFC 7388 LOWPAN-MIB October 2014 + + + ---- lowpanMIB(1.3.6.1.2.1.226) + +---- lowpanNotifications(0) + +---- lowpanObjects(1) + | +---- lowpanStats(1) + | | +--r- lowpanReasmTimeout(1) Unsigned32 + | | +--r- lowpanInReceives(2) Counter32 + | | +--r- lowpanInHdrErrors(3) Counter32 + | | +--r- lowpanInMeshReceives(4) Counter32 + | | +--r- lowpanInMeshForwds(5) Counter32 + | | +--r- lowpanInMeshDelivers(6) Counter32 + | | +--r- lowpanInReasmReqds(7) Counter32 + | | +--r- lowpanInReasmFails(8) Counter32 + | | +--r- lowpanInReasmOKs(9) Counter32 + | | +--r- lowpanInCompReqds(10) Counter32 + | | +--r- lowpanInCompFails(11) Counter32 + | | +--r- lowpanInCompOKs(12) Counter32 + | | +--r- lowpanInDiscards(13) Counter32 + | | +--r- lowpanInDelivers(14) Counter32 + | | +--r- lowpanOutRequests(15) Counter32 + | | +--r- lowpanOutCompReqds(16) Counter32 + | | +--r- lowpanOutCompFails(17) Counter32 + | | +--r- lowpanOutCompOKs(18) Counter32 + | | +--r- lowpanOutFragReqds(19) Counter32 + | | +--r- lowpanOutFragFails(20) Counter32 + | | +--r- lowpanOutFragOKs(21) Counter32 + | | +--r- lowpanOutFragCreates(22) Counter32 + | | +--r- lowpanOutMeshHopLimitExceeds(23) Counter32 + | | +--r- lowpanOutMeshNoRoutes(24) Counter32 + | | +--r- lowpanOutMeshRequests(25) Counter32 + | | +--r- lowpanOutMeshForwds(26) Counter32 + | | +--r- lowpanOutMeshTransmits(27) Counter32 + | | +--r- lowpanOutDiscards(28) Counter32 + | | +--r- lowpanOutTransmits(29) Counter32 + | +---- lowpanIfStatsTable(2) + | +---- lowpanIfStatsEntry(1) [ifIndex] + | +--r- lowpanIfReasmTimeout(1) Unsigned32 + | +--r- lowpanIfInReceives(2) Counter32 + | +--r- lowpanIfInHdrErrors(3) Counter32 + | +--r- lowpanIfInMeshReceives(4) Counter32 + | +--r- lowpanIfInMeshForwds(5) Counter32 + | +--r- lowpanIfInMeshDelivers(6) Counter32 + | +--r- lowpanIfInReasmReqds(7) Counter32 + | +--r- lowpanIfInReasmFails(8) Counter32 + | +--r- lowpanIfInReasmOKs(9) Counter32 + | +--r- lowpanIfInCompReqds(10) Counter32 + | +--r- lowpanIfInCompFails(11) Counter32 + | +--r- lowpanIfInCompOKs(12) Counter32 + | +--r- lowpanIfInDiscards(13) Counter32 + + + +Schoenwaelder, et al. Standards Track [Page 4] + +RFC 7388 LOWPAN-MIB October 2014 + + + | +--r- lowpanIfInDelivers(14) Counter32 + | +--r- lowpanIfOutRequests(15) Counter32 + | +--r- lowpanIfOutCompReqds(16) Counter32 + | +--r- lowpanIfOutCompFails(17) Counter32 + | +--r- lowpanIfOutCompOKs(18) Counter32 + | +--r- lowpanIfOutFragReqds(19) Counter32 + | +--r- lowpanIfOutFragFails(20) Counter32 + | +--r- lowpanIfOutFragOKs(21) Counter32 + | +--r- lowpanIfOutFragCreates(22) Counter32 + | +--r- lowpanIfOutMeshHopLimitExceeds(23) Counter32 + | +--r- lowpanIfOutMeshNoRoutes(24) Counter32 + | +--r- lowpanIfOutMeshRequests(25) Counter32 + | +--r- lowpanIfOutMeshForwds(26) Counter32 + | +--r- lowpanIfOutMeshTransmits(27) Counter32 + | +--r- lowpanIfOutDiscards(28) Counter32 + | +--r- lowpanIfOutTransmits(29) Counter32 + +---- lowpanConformance(2) + +---- lowpanGroups(1) + | +---- lowpanStatsGroup(1) + | +---- lowpanStatsMeshGroup(2) + | +---- lowpanIfStatsGroup(3) + | +---- lowpanIfStatsMeshGroup(4) + +---- lowpanCompliances(2) + +---- lowpanCompliance(1) + + Figure 2: Object Identifier Registration Tree + + The counters defined in the LOWPAN-MIB module provide information + about the 6LoWPAN datagrams received and transmitted and how they are + processed in the 6LoWPAN layer. For link layers that use the 6LoWPAN + dispatch byte as defined in [RFC4944] (e.g., IEEE 802.15.4), a + 6LoWPAN datagram is a datagram with a dispatch byte matching the bit + patterns 01xxxxxx, 10xxxxxx, or 11xxxxxx. Datagrams with a dispatch + byte matching the bit pattern 00xxxxxx (NALP - not a LoWPAN frame) + are not considered to be 6LoWPAN datagrams by this specification. + Other radio technologies may use different mechanisms to identify + 6LoWPAN datagrams (e.g., the BLUETOOTH Low-Energy Logical Link + Control and Adaptation Protocol uses Channel Identifiers + [IPV6-BTLE]). + + The Case Diagram [CASE] in Figure 3 illustrates the conceptual + relationships between the counters. Implementations may choose to + implement the processing of 6LoWPAN datagrams in a different order. + + The generic InDiscards and OutDiscards counters can be incremented + anytime 6LoWPAN datagrams are discarded due to reasons not covered by + the other more specific counters. For example, an implementation + + + + +Schoenwaelder, et al. Standards Track [Page 5] + +RFC 7388 LOWPAN-MIB October 2014 + + + discarding 6LoWPAN datagrams while all buffers are used for ongoing + packet reassemblies will increment the relevant InDiscards counters + for each discarded 6LoWPAN datagram. + + IPv6 layer + ^ v + InDelivers -+- -+- OutRequests + | | + InDiscards <--+ | + | | + InCompOKs .-->| |-->. OutCompReqds + InCompFails <--| | | +--> OutCompFails + InCompReqds `<--+ +<--' OutCompOKs + | | + | +-->. OutFragReqds + InReasmOKs .-->| | +--> OutFragFails + InReasmFails <--| | | -+- OutFragOKs + InReasmReqds `<--+ +<--' OutFragCreates + | | + | | + InMeshDelivers |<--. | + InMeshForwds | |-->. | + InMeshReceives +-->' | | + | +--> | OutMeshHopLimitExceeds + | +--> | OutMeshNoRoutes + | | | + | | .<--+ OutMeshRequests + | `-->| | OutMeshForwds + | `-->| OutMeshTransmits + | | + InHdrErrors <--+ +--> OutDiscards + | | + InReceives -+- -+- OutTransmits + ^ v + interface layer + + Figure 3: Conceptual Relationship between LOWPAN-MIB Counters + + The fragmentation-related counters have been modeled after the + fragmentation-related counters of the IP-MIB [RFC4293]. The discard + counters have been placed at the end of the input and output chains, + but they can be bumped any time if a datagram is discarded for a + reason not covered by the other counters. + + The compression-related counters provide insights into compression + requests and, in particular, compression-related failures. Note that + the diagram is conceptual in the sense that compression happens after + reassembly for incoming 6LoWPAN datagrams, and compression happens + + + +Schoenwaelder, et al. Standards Track [Page 6] + +RFC 7388 LOWPAN-MIB October 2014 + + + before fragmentation for outgoing 6LoWPAN datagrams. Implementations + may choose to implement things slightly differently. For example, + implementations may decompress FRAG1 fragments as soon as they are + received, not waiting for reassembly to complete. + + The counters related to MESH header processing do not have an + explicit discard counter. Implementations that do not support mesh + forwarding MUST count the number of received 6LoWPAN datagrams with a + MESH header (lowpanInMeshReceives), but they MUST NOT increment the + lowpanInMeshReceives and lowpanInMeshDelivers counters if these + 6LoWPAN datagrams are dropped. + +5. Relationship to Other MIB Modules + + The MIB module imports definitions from SNMPv2-SMI [RFC2578], + SNMPv2-CONF [RFC2580], and IF-MIB [RFC2863]. + +6. Definitions + + LOWPAN-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, mib-2 + FROM SNMPv2-SMI -- RFC 2578 + OBJECT-GROUP, MODULE-COMPLIANCE + FROM SNMPv2-CONF -- RFC 2580 + ifIndex FROM IF-MIB; -- RFC 2863 + + lowpanMIB MODULE-IDENTITY + LAST-UPDATED "201410100000Z" -- October 10, 2014 + ORGANIZATION + "IETF IPv6 over Networks of Resource-constrained Nodes + Working Group" + CONTACT-INFO + "WG Email: 6lo@ietf.org + WG Web: http://tools.ietf.org/wg/6lo/ + + Juergen Schoenwaelder + Jacobs University Bremen + Email: j.schoenwaelder@jacobs-university.de + + Anuj Sehgal + Jacobs University Bremen + Email: s.anuj@jacobs-university.de + + Tina Tsou + Huawei Technologies + Email: tina.tsou.zouting@huawei.com + + + +Schoenwaelder, et al. Standards Track [Page 7] + +RFC 7388 LOWPAN-MIB October 2014 + + + Cathy Zhou + Huawei Technologies + Email: cathyzhou@huawei.com" + DESCRIPTION + "The MIB module for monitoring nodes implementing the IPv6 + over Low-Power Wireless Personal Area Networks (6LoWPAN) + protocol. + + Copyright (c) 2014 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD + License set forth in Section 4.c of the IETF Trust's + Legal Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info)." + + REVISION "201410100000Z" -- October 10, 2014 + DESCRIPTION + "Initial version, published as RFC 7388." + + ::= { mib-2 226 } + + -- object definitions + + lowpanNotifications OBJECT IDENTIFIER ::= { lowpanMIB 0 } + lowpanObjects OBJECT IDENTIFIER ::= { lowpanMIB 1 } + lowpanConformance OBJECT IDENTIFIER ::= { lowpanMIB 2 } + + lowpanStats OBJECT IDENTIFIER ::= { lowpanObjects 1 } + + lowpanReasmTimeout OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of seconds that received fragments are + held while they are awaiting reassembly at this entity." + ::= { lowpanStats 1 } + + lowpanInReceives OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + + + + + +Schoenwaelder, et al. Standards Track [Page 8] + +RFC 7388 LOWPAN-MIB October 2014 + + + DESCRIPTION + "The total number of 6LoWPAN datagrams received, including + those received in error." + ::= { lowpanStats 2 } + + lowpanInHdrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of received 6LoWPAN datagrams discarded due to + errors in their headers, including unknown dispatch values." + ::= { lowpanStats 3 } + + lowpanInMeshReceives OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of received 6LoWPAN datagrams with a MESH + header." + ::= { lowpanStats 4 } + + lowpanInMeshForwds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of received 6LoWPAN datagrams requiring mesh + forwarding." + ::= { lowpanStats 5 } + + lowpanInMeshDelivers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of received 6LoWPAN datagrams with a MESH header + delivered to the local system." + ::= { lowpanStats 6 } + + lowpanInReasmReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + + + + + + +Schoenwaelder, et al. Standards Track [Page 9] + +RFC 7388 LOWPAN-MIB October 2014 + + + DESCRIPTION + "The number of received 6LoWPAN fragments that needed to + be reassembled. This includes both FRAG1 and FRAGN 6LoWPAN + datagrams." + ::= { lowpanStats 7 } + + lowpanInReasmFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of failures detected by the re-assembly + algorithm (e.g., timeouts). Note that this is not + necessarily a count of discarded 6LoWPAN fragments + since implementations can lose track of the number + of fragments by combining them as received." + ::= { lowpanStats 8 } + + lowpanInReasmOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets successfully reassembled." + ::= { lowpanStats 9 } + + lowpanInCompReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams requiring header + decompression." + ::= { lowpanStats 10 } + + lowpanInCompFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams where header decompression + failed (e.g., because the necessary context information was + not available)." + ::= { lowpanStats 11 } + + + + + + + +Schoenwaelder, et al. Standards Track [Page 10] + +RFC 7388 LOWPAN-MIB October 2014 + + + lowpanInCompOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams where header decompression + was successful." + ::= { lowpanStats 12 } + + lowpanInDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of received 6LoWPAN datagrams that were + discarded (e.g., for lack of buffer space) even though no + problems were encountered to prevent their continued + processing. Note that this counter does not include any + datagrams discarded due to a reassembly failure or a + compression failure." + ::= { lowpanStats 13 } + + lowpanInDelivers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets successfully delivered + to the IPv6 layer." + ::= { lowpanStats 14 } + + lowpanOutRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets supplied by the IPv6 + layer." + ::= { lowpanStats 15 } + + lowpanOutCompReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets for which header + compression was attempted." + ::= { lowpanStats 16 } + + + +Schoenwaelder, et al. Standards Track [Page 11] + +RFC 7388 LOWPAN-MIB October 2014 + + + lowpanOutCompFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets for which header + compression failed." + ::= { lowpanStats 17 } + + lowpanOutCompOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets for which header + compression was successful." + ::= { lowpanStats 18 } + + lowpanOutFragReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets that required fragmentation + in order to be transmitted." + ::= { lowpanStats 19 } + + lowpanOutFragFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets that have been discarded because + fragmentation failed." + ::= { lowpanStats 20 } + + lowpanOutFragOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets that have been successfully + fragmented." + ::= { lowpanStats 21 } + + lowpanOutFragCreates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + + + +Schoenwaelder, et al. Standards Track [Page 12] + +RFC 7388 LOWPAN-MIB October 2014 + + + STATUS current + DESCRIPTION + "The number of 6LoWPAN fragments that have been + generated as a result of fragmentation. This includes + both FRAG1 and FRAGN 6LoWPAN datagrams." + ::= { lowpanStats 22 } + + lowpanOutMeshHopLimitExceeds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams with a MESH header that + were dropped because the hop limit was exceeded." + ::= { lowpanStats 23 } + + lowpanOutMeshNoRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams with a MESH header that + were dropped because there was no forwarding information + available." + ::= { lowpanStats 24 } + + lowpanOutMeshRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams requiring MESH header + encapsulation." + ::= { lowpanStats 25 } + + lowpanOutMeshForwds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams with a MESH header for + which suitable forwarding information was available." + ::= { lowpanStats 26 } + + lowpanOutMeshTransmits OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + + + +Schoenwaelder, et al. Standards Track [Page 13] + +RFC 7388 LOWPAN-MIB October 2014 + + + DESCRIPTION + "The number of 6LoWPAN datagrams with a MESH header + created." + ::= { lowpanStats 27 } + + lowpanOutDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets that were discarded (e.g., + for lack of buffer space) even though no problem was + encountered to prevent their transmission to their + destination." + ::= { lowpanStats 28 } + + lowpanOutTransmits OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of 6LoWPAN datagram that this entity + supplied to the lower layers for transmission." + ::= { lowpanStats 29 } + + lowpanIfStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF LowpanIfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table providing per-interface statistics." + ::= { lowpanObjects 2 } + + lowpanIfStatsEntry OBJECT-TYPE + SYNTAX LowpanIfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry providing statistics for a specific interface." + INDEX { ifIndex } + ::= { lowpanIfStatsTable 1 } + + LowpanIfStatsEntry ::= SEQUENCE { + lowpanIfReasmTimeout Unsigned32, + lowpanIfInReceives Counter32, + lowpanIfInHdrErrors Counter32, + lowpanIfInMeshReceives Counter32, + lowpanIfInMeshForwds Counter32, + + + +Schoenwaelder, et al. Standards Track [Page 14] + +RFC 7388 LOWPAN-MIB October 2014 + + + lowpanIfInMeshDelivers Counter32, + lowpanIfInReasmReqds Counter32, + lowpanIfInReasmFails Counter32, + lowpanIfInReasmOKs Counter32, + lowpanIfInCompReqds Counter32, + lowpanIfInCompFails Counter32, + lowpanIfInCompOKs Counter32, + lowpanIfInDiscards Counter32, + lowpanIfInDelivers Counter32, + lowpanIfOutRequests Counter32, + lowpanIfOutCompReqds Counter32, + lowpanIfOutCompFails Counter32, + lowpanIfOutCompOKs Counter32, + lowpanIfOutFragReqds Counter32, + lowpanIfOutFragFails Counter32, + lowpanIfOutFragOKs Counter32, + lowpanIfOutFragCreates Counter32, + lowpanIfOutMeshHopLimitExceeds Counter32, + lowpanIfOutMeshNoRoutes Counter32, + lowpanIfOutMeshRequests Counter32, + lowpanIfOutMeshForwds Counter32, + lowpanIfOutMeshTransmits Counter32, + lowpanIfOutDiscards Counter32, + lowpanIfOutTransmits Counter32 + } + + lowpanIfReasmTimeout OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of seconds that received fragments are + held while they are awaiting reassembly at this interface." + ::= { lowpanIfStatsEntry 1 } + + lowpanIfInReceives OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of 6LoWPAN datagrams received on this + interface, including those received in error." + ::= { lowpanIfStatsEntry 2 } + + lowpanIfInHdrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + + + +Schoenwaelder, et al. Standards Track [Page 15] + +RFC 7388 LOWPAN-MIB October 2014 + + + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams received on this + interface that were discarded due to errors in + their headers, including unknown dispatch values." + ::= { lowpanIfStatsEntry 3 } + + lowpanIfInMeshReceives OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams received on this + interface with a MESH header." + ::= { lowpanIfStatsEntry 4 } + + lowpanIfInMeshForwds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams received on this + interface requiring mesh forwarding." + ::= { lowpanIfStatsEntry 5 } + + lowpanIfInMeshDelivers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams received on this + interface with a MESH header delivered to the local + system." + ::= { lowpanIfStatsEntry 6 } + + lowpanIfInReasmReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN fragments received on this + interface that needed to be reassembled. This + includes both FRAG1 and FRAGN 6LoWPAN datagrams." + ::= { lowpanIfStatsEntry 7 } + + lowpanIfInReasmFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + + + +Schoenwaelder, et al. Standards Track [Page 16] + +RFC 7388 LOWPAN-MIB October 2014 + + + STATUS current + DESCRIPTION + "The number of failures detected by the reassembly + algorithm (e.g., timeouts) for datagrams received + on this interface. Note that this is not necessarily + a count of discarded 6LoWPAN fragments since + implementations can lose track of the number + of fragments by combining them as received." + ::= { lowpanIfStatsEntry 8 } + + lowpanIfInReasmOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets successfully reassembled + from fragments received on this interface." + ::= { lowpanIfStatsEntry 9 } + + lowpanIfInCompReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams received on this + interface requiring header decompression." + ::= { lowpanIfStatsEntry 10 } + + lowpanIfInCompFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams received on this + interface where header decompression failed (e.g., + because the necessary context information was + not available)." + ::= { lowpanIfStatsEntry 11 } + + lowpanIfInCompOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams received on this + interface where header decompression was successful." + ::= { lowpanIfStatsEntry 12 } + + + + +Schoenwaelder, et al. Standards Track [Page 17] + +RFC 7388 LOWPAN-MIB October 2014 + + + lowpanIfInDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams received on this + interface that were discarded (e.g., for lack of buffer + space) even though no problems were encountered to + prevent their continued processing. Note that this + counter does not include any datagrams discarded due + to a reassembly failure or a compression failure." + ::= { lowpanIfStatsEntry 13 } + + lowpanIfInDelivers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets received on this + interface that were successfully delivered to the + IPv6 layer." + ::= { lowpanIfStatsEntry 14 } + + lowpanIfOutRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets supplied by the IPv6 + layer to be sent over this interface." + ::= { lowpanIfStatsEntry 15 } + + lowpanIfOutCompReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets to be sent over + this interface for which header compression was + attempted." + ::= { lowpanIfStatsEntry 16 } + + lowpanIfOutCompFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + + + + + +Schoenwaelder, et al. Standards Track [Page 18] + +RFC 7388 LOWPAN-MIB October 2014 + + + DESCRIPTION + "The total number of IPv6 packets to be sent over + this interface for which header compression failed." + ::= { lowpanIfStatsEntry 17 } + + lowpanIfOutCompOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 packets to be sent over + this interface for which header compression was + successful." + ::= { lowpanIfStatsEntry 18 } + + lowpanIfOutFragReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets to be sent over this + interface that required fragmentation in order + to be transmitted." + ::= { lowpanIfStatsEntry 19 } + + lowpanIfOutFragFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets to be sent over this + interface that have been discarded because + fragmentation failed." + ::= { lowpanIfStatsEntry 20 } + + lowpanIfOutFragOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets to be sent over this + interface that have been successfully fragmented." + ::= { lowpanIfStatsEntry 21 } + + lowpanIfOutFragCreates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + + + +Schoenwaelder, et al. Standards Track [Page 19] + +RFC 7388 LOWPAN-MIB October 2014 + + + DESCRIPTION + "The number of 6LoWPAN fragments that have been + generated on this interface as a result of + fragmentation. This includes both FRAG1 and FRAGN + 6LoWPAN datagrams." + ::= { lowpanIfStatsEntry 22 } + + lowpanIfOutMeshHopLimitExceeds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams to be sent on this + interface with a MESH header that were dropped + because the hop limit was exceeded." + ::= { lowpanIfStatsEntry 23 } + + lowpanIfOutMeshNoRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams to be sent on this + interface with a MESH header that were dropped + because there was no forwarding information available." + ::= { lowpanIfStatsEntry 24 } + + lowpanIfOutMeshRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams to be sent on this + interface requiring MESH header encapsulation." + ::= { lowpanIfStatsEntry 25 } + + lowpanIfOutMeshForwds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams to be sent on this + interface with a MESH header for which suitable + forwarding information was available." + ::= { lowpanIfStatsEntry 26 } + + + + + + +Schoenwaelder, et al. Standards Track [Page 20] + +RFC 7388 LOWPAN-MIB October 2014 + + + lowpanIfOutMeshTransmits OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 6LoWPAN datagrams to be sent on this + interface with a MESH header created." + ::= { lowpanIfStatsEntry 27 } + + lowpanIfOutDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 packets to be sent over this + interface that were discarded (e.g., for lack of buffer + space) even though no problem was encountered to + prevent their transmission to their destination." + ::= { lowpanIfStatsEntry 28 } + + lowpanIfOutTransmits OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of 6LoWPAN datagrams to be sent on + this interface that this entity supplied to the lower + layers for transmission." + ::= { lowpanIfStatsEntry 29 } + + -- conformance definitions + + lowpanGroups OBJECT IDENTIFIER ::= { lowpanConformance 1 } + lowpanCompliances OBJECT IDENTIFIER ::= { lowpanConformance 2 } + + lowpanCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for systems that implement 6LoWPAN." + MODULE -- this module + MANDATORY-GROUPS { + lowpanStatsGroup + } + GROUP lowpanStatsMeshGroup + DESCRIPTION + "This group is mandatory for implementations that process + or forward 6LoWPAN datagrams with a MESH header." + GROUP lowpanIfStatsGroup + + + +Schoenwaelder, et al. Standards Track [Page 21] + +RFC 7388 LOWPAN-MIB October 2014 + + + DESCRIPTION + "This group is mandatory for implementations that expose + per-interface statistics." + GROUP lowpanIfStatsMeshGroup + DESCRIPTION + "This group is mandatory for implementations that expose + per-interface statistics and that process or forward + 6LoWPAN datagrams with a MESH header." + ::= { lowpanCompliances 1 } + + lowpanStatsGroup OBJECT-GROUP + OBJECTS { + lowpanReasmTimeout, + lowpanInReceives, + lowpanInHdrErrors, + lowpanInMeshReceives, + lowpanInReasmReqds, + lowpanInReasmFails, + lowpanInReasmOKs, + lowpanInCompReqds, + lowpanInCompFails, + lowpanInCompOKs, + lowpanInDiscards, + lowpanInDelivers, + lowpanOutRequests, + lowpanOutCompReqds, + lowpanOutCompFails, + lowpanOutCompOKs, + lowpanOutFragReqds, + lowpanOutFragFails, + lowpanOutFragOKs, + lowpanOutFragCreates, + lowpanOutDiscards, + lowpanOutTransmits + } + STATUS current + DESCRIPTION + "A collection of objects providing information and + statistics about the processing of 6LoWPAN datagrams, + excluding counters covering the processing of datagrams + with a MESH header." + ::= { lowpanGroups 1 } + + lowpanStatsMeshGroup OBJECT-GROUP + OBJECTS { + lowpanInMeshForwds, + lowpanInMeshDelivers, + lowpanOutMeshHopLimitExceeds, + + + +Schoenwaelder, et al. Standards Track [Page 22] + +RFC 7388 LOWPAN-MIB October 2014 + + + lowpanOutMeshNoRoutes, + lowpanOutMeshRequests, + lowpanOutMeshForwds, + lowpanOutMeshTransmits + } + STATUS current + DESCRIPTION + "A collection of objects providing information and + statistics about the processing of 6LoWPAN datagrams + with a MESH header." + ::= { lowpanGroups 2 } + + lowpanIfStatsGroup OBJECT-GROUP + OBJECTS { + lowpanIfReasmTimeout, + lowpanIfInReceives, + lowpanIfInHdrErrors, + lowpanIfInMeshReceives, + lowpanIfInReasmReqds, + lowpanIfInReasmFails, + lowpanIfInReasmOKs, + lowpanIfInCompReqds, + lowpanIfInCompFails, + lowpanIfInCompOKs, + lowpanIfInDiscards, + lowpanIfInDelivers, + lowpanIfOutRequests, + lowpanIfOutCompReqds, + lowpanIfOutCompFails, + lowpanIfOutCompOKs, + lowpanIfOutFragReqds, + lowpanIfOutFragFails, + lowpanIfOutFragOKs, + lowpanIfOutFragCreates, + lowpanIfOutDiscards, + lowpanIfOutTransmits + } + STATUS current + DESCRIPTION + "A collection of objects providing per-interface + information and statistics about the processing + of 6LoWPAN datagrams, excluding counters covering + the processing of datagrams with a MESH header." + ::= { lowpanGroups 3 } + + + + + + + +Schoenwaelder, et al. Standards Track [Page 23] + +RFC 7388 LOWPAN-MIB October 2014 + + + lowpanIfStatsMeshGroup OBJECT-GROUP + OBJECTS { + lowpanIfInMeshForwds, + lowpanIfInMeshDelivers, + lowpanIfOutMeshHopLimitExceeds, + lowpanIfOutMeshNoRoutes, + lowpanIfOutMeshRequests, + lowpanIfOutMeshForwds, + lowpanIfOutMeshTransmits + } + STATUS current + DESCRIPTION + "A collection of objects providing per-interface + information and statistics about the processing + of 6LoWPAN datagrams with a MESH header." + ::= { lowpanGroups 4 } + + END + +7. Security Considerations + + There are no management objects defined in this MIB module that have + a MAX-ACCESS clause of read-write and/or read-create. So, if this + MIB module is implemented correctly, then there is no risk that an + intruder can alter or create any management objects of this MIB + module via direct SNMP SET operations. + + Some of the readable objects in this MIB module (i.e., objects with a + MAX-ACCESS other than not-accessible) may be considered sensitive or + vulnerable in some network environments. It is thus important to + control even GET and/or NOTIFY access to these objects and possibly + to even encrypt the values of these objects when sending them over + the network via SNMP. + + The read-only counters provide insights into the amount of 6LoWPAN + traffic a node is receiving or transmitting. This might provide + information regarding whether a device is regularly exchanging + information with other devices or whether a device is mostly not + participating in any communication (e.g., the device might be + "easier" to take away unnoticed). The reassembly counters could be + used to direct denial-of-service attacks on the reassembly mechanism. + + SNMP versions prior to SNMPv3 did not include adequate security. + Even if the network itself is secure (for example by using IPsec), + even then, there is no control as to who on the secure network is + allowed to access and GET/SET (read/change/create/delete) the objects + in this MIB module. + + + + +Schoenwaelder, et al. Standards Track [Page 24] + +RFC 7388 LOWPAN-MIB October 2014 + + + It is RECOMMENDED that implementers consider the security features as + provided by the SNMPv3 framework (see [RFC3410], Section 8), + including full support for the SNMPv3 cryptographic mechanisms (for + authentication and privacy). + + Further, deployment of SNMP versions prior to SNMPv3 is NOT + RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to + enable cryptographic security. It is then a customer/operator + responsibility to ensure that the SNMP entity giving access to an + instance of this MIB module is properly configured to give access to + the objects only to those principals (users) that have legitimate + rights to indeed GET or SET (change/create/delete) them. + +8. IANA Considerations + + The MIB module in this document uses the following IANA-assigned + OBJECT IDENTIFIER value recorded in the SMI Numbers registry: + + Descriptor OBJECT IDENTIFIER value + ---------- ----------------------- + lowpanMIB { mib-2 226 } + +9. References + +9.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997, + <http://www.rfc-editor.org/info/rfc2119>. + + [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. + Schoenwaelder, Ed., "Structure of Management Information + Version 2 (SMIv2)", STD 58, RFC 2578, April 1999, + <http://www.rfc-editor.org/info/rfc2578>. + + [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. + Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD + 58, RFC 2579, April 1999, + <http://www.rfc-editor.org/info/rfc2579>. + + [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, + "Conformance Statements for SMIv2", STD 58, RFC 2580, + April 1999, <http://www.rfc-editor.org/info/rfc2580>. + + [RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group + MIB", RFC 2863, June 2000, + <http://www.rfc-editor.org/info/rfc2863>. + + + + +Schoenwaelder, et al. Standards Track [Page 25] + +RFC 7388 LOWPAN-MIB October 2014 + + + [RFC4944] Montenegro, G., Kushalnagar, N., Hui, J., and D. Culler, + "Transmission of IPv6 Packets over IEEE 802.15.4 + Networks", RFC 4944, September 2007, + <http://www.rfc-editor.org/info/rfc4944>. + +9.2. Informative References + + [CASE] Case, J. and C. Partridge, "Case Diagrams: A First Step to + Diagrammed Management Information Bases", Computer + Communications Review 19(1), January 1989. + + [IPV6-BTLE] + Nieminen, J., Savolainen, T., Isomaki, M., Patil, B., + Shelby, Z., and C. Gomez, "Transmission of IPv6 Packets + over BLUETOOTH(R) Low Energy", Work in Progress, draft- + ietf-6lo-btle-03, September 2014. + + [RFC0768] Postel, J., "User Datagram Protocol", STD 6, RFC 768, + August 1980, <http://www.rfc-editor.org/info/rfc768>. + + [RFC2460] Deering, S. and R. Hinden, "Internet Protocol, Version 6 + (IPv6) Specification", RFC 2460, December 1998, + <http://www.rfc-editor.org/info/rfc2460>. + + [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, + "Introduction and Applicability Statements for Internet- + Standard Management Framework", RFC 3410, December 2002, + <http://www.rfc-editor.org/info/rfc3410>. + + [RFC4113] Fenner, B. and J. Flick, "Management Information Base for + the User Datagram Protocol (UDP)", RFC 4113, June 2005, + <http://www.rfc-editor.org/info/rfc4113>. + + [RFC4292] Haberman, B., "IP Forwarding Table MIB", RFC 4292, April + 2006, <http://www.rfc-editor.org/info/rfc4292>. + + [RFC4293] Routhier, S., "Management Information Base for the + Internet Protocol (IP)", RFC 4293, April 2006, + <http://www.rfc-editor.org/info/rfc4293>. + + [RFC4443] Conta, A., Deering, S., and M. Gupta, "Internet Control + Message Protocol (ICMPv6) for the Internet Protocol + Version 6 (IPv6) Specification", RFC 4443, March 2006, + <http://www.rfc-editor.org/info/rfc4443>. + + [RFC7252] Shelby, Z., Hartke, K., and C. Bormann, "The Constrained + Application Protocol (CoAP)", RFC 7252, June 2014, + <http://www.rfc-editor.org/info/rfc7252>. + + + +Schoenwaelder, et al. Standards Track [Page 26] + +RFC 7388 LOWPAN-MIB October 2014 + + +Acknowledgements + + This specification borrows heavily from the IP-MIB defined in + [RFC4293]. + + Juergen Schoenwaelder and Anuj Sehgal were partly funded by Flamingo, + a Network of Excellence project (ICT-318488) supported by the + European Commission under its Seventh Framework Programme. + +Authors' Addresses + + Juergen Schoenwaelder + Jacobs University + Campus Ring 1 + Bremen 28759 + Germany + + EMail: j.schoenwaelder@jacobs-university.de + + + Anuj Sehgal + Jacobs University + Campus Ring 1 + Bremen 28759 + Germany + + EMail: s.anuj@jacobs-university.de + + + Tina Tsou + Huawei Technologies + 2330 Central Expressway + Santa Clara CA 95050 + United States + + EMail: tina.tsou.zouting@huawei.com + + + Cathy Zhou + Huawei Technologies + Bantian, Longgang District + Shenzhen 518129 + China + + EMail: cathyzhou@huawei.com + + + + + + +Schoenwaelder, et al. Standards Track [Page 27] + |