path: root/doc/rfc/rfc1248.txt

Network Working Group                                          F. Baker
Request for Comments: 1248                                          ACC
                                                              R. Coltun
                                                Computer Science Center
                                                              July 1991


               OSPF Version 2 Management Information Base

Status of this Memo

   This RFC specifies an IAB standards track protocol for the Internet
   community, and requests discussion and suggestions for improvements.
   Please refer to the current edition of the "IAB Official Protocol
   Standards" for the standardization state and status of this protocol.
   Distribution of this memo is unlimited.

Table of Contents

   1. Abstract .............................................    2
   2. The Network Management Framework......................    2
   3. Objects ..............................................    2
   3.1 Format of Definitions ...............................    3
   4. Overview .............................................    3
   4.1 Textual Conventions .................................    3
   4.2 Structure of MIB ....................................    3
   4.2.1 General Variables .................................    4
   4.2.2 Area Data Structure and Area Stub Metric Table ....    4
   4.2.3 Link State Database ...............................    4
   4.2.4 Address Table and Host Tables .....................    4
   4.2.5 Interface and Interface Metric Tables .............    4
   4.2.6 Virtual Interface Table ...........................    4
   4.2.7 Neighbor and Virtual Neighbor Tables ..............    4
   4.3 Conceptual Row Creation .............................    5
   4.4 Default Configuration ...............................    5
   5. Definitions ..........................................    7
   5.1 OSPF General Variables ..............................    8
   5.2 OSPF Area Data Structure ............................   11
   5.3 OSPF Area Default Metric Table ......................   14
   5.4 OSPF Link State Database ............................   16
   5.5 OSPF Address Range Table ............................   19
   5.6 OSPF Host Table .....................................   21
   5.7 OSPF Interface Table ................................   23
   5.8 OSPF Interface Metric Table .........................   28
   5.9 OSPF Virtual Interface Table ........................   31
   5.10 OSPF Neighbor Table ................................   34
   5.11 OSPF Virtual Neighbor Table ........................   38
   6. Acknowledgements .....................................   40



Baker & Coltun                                                  [Page 1]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


   7. References ...........................................   40
   8. Security Considerations...............................   41
   9. Authors' Addresses....................................   42

1.  Abstract

   This memo defines an experimental portion of the Management
   Information Base (MIB) for use with network management protocols in
   TCP/IP-based internets.  In particular, it defines objects for
   managing OSPF Version 2.

2.  The Network Management Framework

   The Internet-standard Network Management Framework consists of three
   components.  They are:

      RFC 1155 which defines the SMI, the mechanisms used for describing
      and naming objects for the purpose of management.  RFC 1212
      defines a more concise description mechanism, which is wholly
      consistent with the SMI.

      RFC 1156 which defines MIB-I, the core set of managed objects for
      the Internet suite of protocols.  RFC 1213, defines MIB-II, an
      evolution of MIB-I based on implementation experience and new
      operational requirements.

      RFC 1157 which defines the SNMP, the protocol used for network
      access to managed objects.

   The Framework permits new objects to be defined for the purpose of
   experimentation and evaluation.

3.  Objects

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  Objects in the MIB are
   defined using the subset of Abstract Syntax Notation One (ASN.1) [7]
   defined in the SMI.  In particular, each object has a name, a syntax,
   and an encoding.  The name is an object identifier, an
   administratively assigned name, which specifies an object type.  The
   object type together with an object instance serves to uniquely
   identify a specific instantiation of the object.  For human
   convenience, we often use a textual string, termed the OBJECT
   DESCRIPTOR, to also refer to the object type.

   The syntax of an object type defines the abstract data structure
   corresponding to that object type.  The ASN.1 language is used for
   this purpose.  However, the SMI [3] purposely restricts the ASN.1



Baker & Coltun                                                  [Page 2]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


   constructs which may be used.  These restrictions are explicitly made
   for simplicity.

   The encoding of an object type is simply how that object type is
   represented using the object type's syntax.  Implicitly tied to the
   notion of an object type's syntax and encoding is how the object type
   is represented when being transmitted on the network.

   The SMI specifies the use of the basic encoding rules of ASN.1 [8],
   subject to the additional requirements imposed by the SNMP.

3.1.  Format of Definitions

   Section 5 contains contains the specification of all object types
   contained in this MIB module.  The object types are defined using the
   conventions defined in the SMI, as amended by the extensions
   specified in [9].

4.  Overview

4.1.  Textual Conventions

   Several new data types are introduced as a textual convention in this
   MIB document.  These textual conventions enhance the readability of
   the specification and can ease comparison with other specifications
   if appropriate.  It should be noted that the introduction of the
   these textual conventions has no effect on either the syntax nor the
   semantics of any managed objects.  The use of these is merely an
   artifact of the explanatory method used.  Objects defined in terms of
   one of these methods are always encoded by means of the rules that
   define the primitive type.  Hence, no changes to the SMI or the SNMP
   are necessary to accommodate these textual conventions which are
   adopted merely for the convenience of readers and writers in pursuit
   of the elusive goal of clear, concise, and unambiguous MIB documents.

   The new data types are AreaID, RouterID, TOSType, Metric, BigMetric,
   TruthValue, Status, Validation, PositiveInteger, HelloRange,
   UpToMaxAge, InterfaceIndex, and DesignatedRouterPriority.

4.2.  Structure of MIB

   The MIB is composed of the following sections:

          General Variables
          Area Data Structure
          Area Stub Metric Table
          Link State Database
          Address Range Table



Baker & Coltun                                                  [Page 3]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


          Host Table
          Interface Table
          Interface Metric Table
          Virtual Interface Table
          Neighbor Table
          Virtual Neighbor Table

4.2.1.  General Variables

   The General Variables are about what they sound like; variables which
   are global to the OSPF Process.

4.2.2.  Area Data Structure and Area Stub Metric Table

   The Area Data Structure describes the OSPF Areas that the router
   participates in.  The Area Stub Metric Table describes the metrics
   advertised into a stub area by the default router(s).

4.2.3.  Link State Database

   The Link State Database is provided primarily to provide detailed
   information for network debugging.

4.2.4.  Address Table and Host Tables

   The Address Range Table and Host Table are provided to view
   configured Network Summary and Host Route information.

4.2.5.  Interface and Interface Metric Tables

   The Interface Table and the Interface Metric Table together describe
   the various IP interfaces to OSPF.  The metrics are placed in
   separate tables in order to simplify dealing with multiple types of
   service, and to provide flexibility in the event that the IP TOS
   definition is changed in the future.  A Default Value specification
   is supplied for the TOS 0 (default) metric.

4.2.6.  Virtual Interface Table

   Likewise, the Virtual Interface Table describe virtual links to the
   OSPF Process.

4.2.7.  Neighbor and Virtual Neighbor Tables

   The Neighbor Table and the Virtual Neighbor Table describe the
   neighbors to the OSPF Process.





Baker & Coltun                                                  [Page 4]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


4.3.  Conceptual Row Creation

   For the benefit of row-creation in "conceptual" (see [9]) tables,
   DEFVAL (Default Value) clauses are included in the definitions in
   section 5, suggesting values which an agent should use for instances
   of variables which need to be created due to a Set-Request, but which
   are not specified in the Set- Request.  DEFVAL clauses have not been
   specified for some objects which are read-only, implying that they
   are zeroed upon row creation.  These objects are of the SYNTAX
   Counter or Gauge.

   For those objects not having a DEFVAL clause, both management
   stations and agents should heed the Robustness Principle of the
   Internet (see RFC-791):

      "be liberal in what you accept, conservative in what
      you send"

   That is, management stations should include as many of these columnar
   objects as possible (e.g., all read-write objects) in a Set-Request
   when creating a conceptual row; agents should accept a Set-Request
   with as few of these as they need (e.g., the minimum contents of a
   row creating SET consists of those objects for which, as they cannot
   be intuited, no default is specified.).

   There are numerous read-write objects in this MIB, as it is designed
   for SNMP management of the protocol, not just SNMP monitoring of its
   state.  However, in the absence of a standard SNMP Security
   architecture, it is acceptable for implementations to implement these
   as read-only with an alternative interface for their modification.

4.4.  Default Configuration

   OSPF is a powerful routing protocol, equipped with features to handle
   virtually any configuration requirement that might reasonably be
   found within an Autonomous System.  With this power comes a fair
   degree of complexity, which the sheer number of objects in the MIB
   will attest to.  Care has therefore been taken, in constructing this
   MIB, to define default values for virtually every object, to minimize
   the amount of parameterization required in the typical case.  That
   default configuration is as follows:

   Given the following assumptions:

            - IP has already been configured

            - The ifTable has already been configured




Baker & Coltun                                                  [Page 5]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            - ifSpeed is estimated by the interface drivers

            - The OSPF Process automatically discovers all IP
            Interfaces and creates corresponding OSPF Interfaces

            - The TOS 0 metrics are autonomously derived from
            ifSpeed

            - The OSPF Process automatically creates the Areas
            required for the Interfaces

     The simplest configuration of an OSPF process requires that:

            - The OSPF Process be Enabled.

     This can be accomplished with a single SET:

                       ospfAdminStat := enabled.

     The configured system will have the following attributes:

            - The RouterID will be one of the IP addresses of the
            device

            - The device will be neither an Area Border Router nor
            an Autonomous System Border Router.

            - Every IP Interface, with or without an address, will
            be an OSPF Interface.

            - The AreaID of each interface will be 0.0.0.0, the
            Backbone.

            - Authentication will be disabled

            - All Broadcast and Point to Point interfaces will be
            operational.  NBMA Interfaces require the configuration
            of at least one neighbor.

            - Timers on all direct interfaces will be:
                     Hello Interval:        10 seconds
                     Dead Timeout:          40 Seconds
                     Retransmission:         5 Seconds
                     Transit Delay:          1 Second
                     Poll Interval:        120 Seconds

           - no direct links to hosts will be configured.




Baker & Coltun                                                  [Page 6]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


           - no addresses will be summarized

           - Metrics, being a measure of bit duration, are
           unambiguous and intelligent.

           - No Virtual Links will be configured.

5.  Definitions


     RFC1248-MIB DEFINITIONS ::= BEGIN

     IMPORTS
             experimental, Counter, Gauge, IpAddress
                     FROM RFC1155-SMI
             OBJECT-TYPE
                     FROM RFC-1212;

     --  This MIB module uses the extended OBJECT-TYPE macro as
     --  defined in [9].

             ospf OBJECT IDENTIFIER ::= { standard-mib 13 }

     --  The Area ID, in OSPF, has the same format as an IP Address,
     --  but has the function of defining a summarization point for
     --  Link State Advertisements

             AreaID ::= IpAddress

     --  The Router ID, in OSPF, has the same format as an IP Address,
     --  but identifies the router independent of its IP Address.

             RouterID ::= IpAddress

     --  The OSPF Metric is defined as an unsigned value in the range

             Metric    ::= INTEGER (1..'FFFF'h)
             BigMetric ::= INTEGER (1..'FFFFFF'h)

     --  Boolean Values

             TruthValue ::= INTEGER { true (1), false (2) }

     --  Status Values

             Status ::= INTEGER { enabled (1), disabled (2) }





Baker & Coltun                                                  [Page 7]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     --  Row Creation/Deletion Values

             Validation ::= INTEGER { valid (1), invalid (2) }

     --  Time Durations measured in seconds

             PositiveInteger ::= INTEGER (1..'FFFFFFFF'h)
             HelloRange      ::= INTEGER (1..'FFFF'h)
             UpToMaxAge      ::= INTEGER (1..3600)

     --  The range of ifIndex, i.e. (1..ifNumber)

             InterfaceIndex ::= INTEGER

     --  Potential Priorities for the Designated Router Election

             DesignatedRouterPriority ::= INTEGER (0..'FF'h)

     --  Type of Service is defined as a mapping to the IP Type of
     --  Service Flags as defined in the Router Requirements
     --  Document:
     --
     --      D => Low Delay          R => Reliable Route
     --      T => High Bandwidth

     --  D T R   TOS      D T R   TOS
     --  0 0 0 =>  0      0 0 1 =>  4
     --  0 1 0 =>  8      0 1 1 => 12
     --  1 0 0 => 16      1 0 1 => 20
     --  1 1 0 => 24      1 1 1 => 28

     --  The remaining values are left for future definition.

             TOSType ::= INTEGER (0..31)

     --  OSPF General Variables

     --      These parameters apply globally to the Router's
     --      OSPF Process.

     ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 }

     ospfRouterId OBJECT-TYPE
         SYNTAX   RouterID
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "A 32-bit integer uniquely identifying the router in



Baker & Coltun                                                  [Page 8]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            the Autonomous System.

            By convention, to ensure uniqueness, this should
            default to the value of one of the router's IP
            interface addresses."
         REFERENCE
            "OSPF Version 2, C.1 Global parameters"
         ::= { ospfGeneralGroup 1 }

     ospfAdminStat OBJECT-TYPE
         SYNTAX   Status
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The administrative status of OSPF in the router.  The
            value 'enabled' denotes that the OSPF Process is active
            on at least one interface; 'disabled' disables it on
            all interfaces."
         ::= { ospfGeneralGroup 2 }

     ospfVersionNumber OBJECT-TYPE
         SYNTAX   INTEGER { version2 (2) }
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The current version number of the OSPF protocol is 2."
         REFERENCE
            "OSPF Version 2, Title"
         ::= { ospfGeneralGroup 3 }

     ospfAreaBdrRtrStatus OBJECT-TYPE
         SYNTAX   TruthValue
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "A flag to note whether this router is an area border
            router."
         REFERENCE
            "OSPF Version 2, Section 3 Splitting the AS into Areas"
         ::= { ospfGeneralGroup 4 }

     ospfASBdrRtrStatus OBJECT-TYPE
         SYNTAX   TruthValue
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "A flag to note whether this router is an Autonomous
            System border router."



Baker & Coltun                                                  [Page 9]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


         REFERENCE
            "OSPF Version 2, Section 3.3 Classification of routers"
         ::= { ospfGeneralGroup 5 }

     ospfExternLSACount OBJECT-TYPE
         SYNTAX   Gauge
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The number of external (LS type 5) link-state
            advertisements in the link-state database."
         REFERENCE
            "OSPF Version 2, Appendix A.4.5 AS external link
            advertisements"
         ::= { ospfGeneralGroup 6 }

     ospfExternLSACksumSum OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The 32-bit unsigned sum of the LS checksums of the
            external link-state advertisements contained in the
            link-state database.  This sum can be used to determine
            if there has been a change in a router's link state
            database, and to compare the link-state database of two
            routers."
         ::= { ospfGeneralGroup 7 }

     ospfTOSSupport OBJECT-TYPE
         SYNTAX   TruthValue
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The router's support for type-of-service routing."
         REFERENCE
            "OSPF Version 2, Appendix F.1.2 Optional TOS support"
         ::= { ospfGeneralGroup 8 }

     ospfOriginateNewLSAs OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The number of new link-state advertisements that have
            been originated.  This number is incremented each time
            the router originates a new LSA."
         ::= { ospfGeneralGroup 9 }



Baker & Coltun                                                 [Page 10]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     ospfRxNewLSAs OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The number of link-state advertisements received
            determined to be new instantiations.  This number does
            not include newer instantiations of self-originated
            link-state advertisements."
         ::= { ospfGeneralGroup 10 }


     --      The OSPF Area Data Structure contains information
     --      regarding the various areas. The interfaces and
     --      virtual links are configured as part of these areas.
     --      Area 0.0.0.0, by definition, is the Backbone Area

     ospfAreaTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfAreaEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "Information describing the configured parameters and
            cumulative statistics of the router's attached areas."
         REFERENCE
            "OSPF Version 2, Section 6  The Area Data Structure"
         ::= { ospf 2 }

     ospfAreaEntry OBJECT-TYPE
         SYNTAX   OspfAreaEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "Information describing the configured parameters and
            cumulative statistics of one of the router's attached
            areas."
         INDEX { ospfAreaID }
         ::= { ospfAreaTable 1 }

     OspfAreaEntry ::=
         SEQUENCE {
             ospfAreaId
                 AreaID,
             ospfAuthType
                 INTEGER,
             ospfImportASExtern
                 TruthValue,
             ospfSpfRuns



Baker & Coltun                                                 [Page 11]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


                 Counter,
             ospfAreaBdrRtrCount
                 Gauge,
             ospfASBdrRtrCount
                 Gauge,
             ospfLSACount
                 Gauge,
             ospfAreaLSACksumSum
                 INTEGER
         }

     ospfAreaId OBJECT-TYPE
         SYNTAX   AreaID
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "A 32-bit integer uniquely identifying an area.  Area
            ID 0.0.0.0 is used for the OSPF backbone."
         REFERENCE
            "OSPF Version 2, Appendix C.2 Area parameters"
         ::= { ospfAreaEntry 1 }

     ospfAuthType OBJECT-TYPE
         SYNTAX   INTEGER
                     -- none (0),
                     -- simplePassword (1)
                     -- reserved for specification by IANA (> 1)
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The authentication type specified for an area.
            Additional authentication types may be assigned locally
            on a per Area basis."
         REFERENCE
            "OSPF Version 2, Appendix E Authentication"
         DEFVAL { 0 }        -- no authentication, by default
         ::= { ospfAreaEntry 2 }

     ospfImportASExtern OBJECT-TYPE
         SYNTAX   TruthValue
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The area's support for importing AS external link-
            state advertisements."
         REFERENCE
            "OSPF Version 2, Appendix C.2 Area parameters"
         DEFVAL { true }



Baker & Coltun                                                 [Page 12]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


         ::= { ospfAreaEntry 3 }

     ospfSpfRuns OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The number of times that the intra-area route table
            has been calculated using this area's link-state
            database.  This is typically done using Dijkstra's
            algorithm."
         DEFVAL   { 0 }
         ::= { ospfAreaEntry 4 }

     ospfAreaBdrRtrCount OBJECT-TYPE
         SYNTAX   Gauge
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The total number of area border routers reachable
            within this area.  This is initially zero, and is
            calculated in each SPF Pass."
         DEFVAL   { 0 }
         ::= { ospfAreaEntry 5 }

     ospfASBdrRtrCount OBJECT-TYPE
         SYNTAX   Gauge
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The total number of Autonomous System border routers
            reachable within this area.  This is initially zero,
            and is calculated in each SPF Pass."
         DEFVAL   { 0 }
         ::= { ospfAreaEntry 6 }

     ospfAreaLSACount OBJECT-TYPE
         SYNTAX   Gauge
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The total number of link-state advertisements in this
            area's link-state database, excluding AS External
            LSA's."
         DEFVAL   { 0 }
         ::= { ospfAreaEntry 7 }





Baker & Coltun                                                 [Page 13]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     ospfAreaLSACksumSum OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The 32-bit unsigned sum of the link-state
            advertisements' LS checksums contained in this area's
            link-state database.  This sum excludes external (LS
            type 5) link-state advertisements.  The sum can be used
            to determine if there has been a change in a router's
            link state database, and to compare the link-state
            database of two routers."
         DEFVAL   { 0 }
         ::= { ospfAreaEntry 8 }


     --  OSPF Area Default Metric Table

     --      The OSPF Area Default Metric Table describes the metrics
     --      that a default Area Border Router will advertise into a
     --      Stub area.

     ospfStubAreaTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfStubAreaEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The set of metrics that will be advertised by a
            default Area Border Router into a stub area."
         REFERENCE
            "OSPF Version 2, Appendix C.2, Area Parameters"
         ::= { ospf 3 }

     ospfStubAreaEntry OBJECT-TYPE
         SYNTAX   OspfStubAreaEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The metric for a given Type of Service that will be
            advertised by a default Area Border Router into a stub
            area."
         REFERENCE
            "OSPF Version 2, Appendix C.2, Area Parameters"
         INDEX { ospfStubAreaID, ospfStubTOS }
         ::= { ospfStubAreaTable 1 }






Baker & Coltun                                                 [Page 14]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     OspfStubAreaEntry ::=
         SEQUENCE {
             ospfStubAreaID
                 AreaID,
             ospfStubTOS
                 TOSType,
             ospfStubMetric
                 BigMetric,
             ospfStubStatus
                 Validation
         }

     ospfStubAreaID OBJECT-TYPE
         SYNTAX   AreaID
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The 32 bit identifier for the Stub Area.  On creation,
            this can be derived from the instance."
         ::= { ospfStubAreaEntry 1 }

     ospfStubTOS OBJECT-TYPE
         SYNTAX   TOSType
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The Type of Service associated with the metric.  On
            creation, this can be derived from the instance."

         ::= { ospfStubAreaEntry 2 }

     ospfStubMetric OBJECT-TYPE
         SYNTAX   BigMetric
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The metric value applied at the indicated type of
            service.  By default, this equals the least metric at
            the type of service among the interfaces to other
            areas."
         ::= { ospfStubAreaEntry 3 }

     ospfStubStatus OBJECT-TYPE
         SYNTAX   Validation
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This variable displays the validity or invalidity of



Baker & Coltun                                                 [Page 15]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            the entry.  Setting it to 'invalid' has the effect of
            rendering it inoperative.  The internal effect (row
            removal) is implementation dependent."
         DEFVAL   { valid }
         ::= { ospfStubAreaEntry 4 }


     --  OSPF Link State Database

     --      The Link State Database contains the Link State
     --      Advertisements from throughout the areas that the
     --      device is attached to.

     ospfLsdbTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfLsdbEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The OSPF Process's Links State Database."
         REFERENCE
            "OSPF Version 2, Section 12 Link State Advertisements"
         ::= { ospf 4 }

     ospfLsdbEntry OBJECT-TYPE
         SYNTAX   OspfLsdbEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "A single Link State Advertisement."
         INDEX { ospfLsdbAreaId, ospfLsdbType,
                 ospfLsdbLSID, ospfLsdbRouterId }
         ::= { ospfLsdbTable 1 }

     OspfLsdbEntry ::=
         SEQUENCE {
             ospfLsdbAreaId
                 AreaID,
             ospfLsdbType
                 INTEGER,
             ospfLsdbLSID
                 IpAddress,
             ospfLsdbRouterId
                 RouterID,
             ospfLsdbSequence
                 INTEGER,
             ospfLsdbAge
                 INTEGER,
             ospfLsdbChecksum



Baker & Coltun                                                 [Page 16]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


                 INTEGER,
             ospfLsdbAdvertisement
                 OCTET STRING
         }

     ospfLsdbAreaId OBJECT-TYPE
         SYNTAX   AreaID
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The 32 bit identifier of the Area from which the LSA
            was received."
         REFERENCE
            "OSPF Version 2, Appendix C.2 Area parameters"
         ::= { ospfLsdbEntry 1 }

     ospfLsdbType OBJECT-TYPE
         SYNTAX   INTEGER {
                     routerLink (1),
                     networkLink (2),
                     summaryLink (3),
                     asSummaryLink (4),
                     asExternalLink (5)
                  }
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The type of the link state advertisement.  Each link
            state type has a separate advertisement format."
         REFERENCE
            "OSPF Version 2, Appendix A.4.1 The Link State
            Advertisement header"
         ::= { ospfLsdbEntry 2 }

     ospfLsdbLSID OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The Link State ID is an LS Type Specific field
            containing either a Router ID or an IP Address; it
            identifies the piece of the routing domain that is
            being described by the advertisement."
         REFERENCE
            "OSPF Version 2, Section 12.1.4 Link State ID"
         ::= { ospfLsdbEntry 3 }





Baker & Coltun                                                 [Page 17]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     ospfLsdbRouterId OBJECT-TYPE
         SYNTAX   RouterID
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The 32 bit number that uniquely identifies the
            originating router in the Autonomous System."
         REFERENCE
            "OSPF Version 2, Appendix C.1 Global parameters"
         ::= { ospfLsdbEntry 4 }

     --  Note that the OSPF Sequence Number is a 32 bit signed
     --  integer.  It starts with the value '80000001'h,
     --  or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
     --  Thus, a typical sequence number will be very negative.

     ospfLsdbSequence OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The sequence number field is a signed 32-bit integer.
            It is used to detect old and duplicate link state
            advertisements.  The space of sequence numbers is
            linearly ordered.  The larger the sequence number the
            more recent the advertisement."
         REFERENCE
            "OSPF Version 2, Section 12.1.6 LS sequence number"
         ::= { ospfLsdbEntry 5 }

     ospfLsdbAge OBJECT-TYPE
         SYNTAX   INTEGER    -- Should be 0..MaxAge
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "This field is the age of the link state advertisement
            in seconds."
         REFERENCE
            "OSPF Version 2, Section 12.1.1 LS age"
         ::= { ospfLsdbEntry 6 }

     ospfLsdbChecksum OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "This field is the checksum of the complete contents of
            the advertisement, excepting the age field.  The age



Baker & Coltun                                                 [Page 18]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            field is excepted so that an advertisement's age can be
            incremented without updating the checksum.  The
            checksum used is the same that is used for ISO
            connectionless datagrams; it is commonly referred to as
            the Fletcher checksum."
         REFERENCE
            "OSPF Version 2, Section 12.1.7 LS checksum"
         ::= { ospfLsdbEntry 7 }

     ospfLsdbAdvertisement OBJECT-TYPE
         SYNTAX   OCTET STRING
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The entire Link State Advertisement, including its
            header."
         REFERENCE
            "OSPF Version 2, Section 12 Link State Advertisements"
         ::= { ospfLsdbEntry 8 }


     --  Address Range Table

     --      The Address Range Table acts as an adjunct to the Area
     --      Table; It describes those Address Range Summaries that
     --      are configured to be propagated from an Area to reduce
     --      the amount of information about it which is known beyond
     --      its borders.

     ospfAreaRangeTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfAreaRangeEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "A range if IP addresses specified by an IP address/IP
            network mask pair.  For example, class B address range
            of X.X.X.X with a network mask of 255.255.0.0 includes
            all IP addresses from X.X.0.0 to X.X.255.255"
         REFERENCE
            "OSPF Version 2, Appendix C.2  Area parameters"
         ::= { ospf 5 }

     ospfAreaRangeEntry OBJECT-TYPE
         SYNTAX   OspfAreaRangeEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "A range if IP addresses specified by an IP address/IP



Baker & Coltun                                                 [Page 19]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            network mask pair.  For example, class B address range
            of X.X.X.X with a network mask of 255.255.0.0 includes
            all IP addresses from X.X.0.0 to X.X.255.255"
         REFERENCE
            "OSPF Version 2, Appendix C.2  Area parameters"
         INDEX { ospfAreaRangeAreaID, ospfAreaRangeNet }
         ::= { ospfAreaRangeTable 1 }

     OspfAreaRangeEntry ::=
         SEQUENCE {
             ospfAreaRangeAreaID
                 AreaID,
             ospfAreaRangeNet
                 IpAddress,
             ospfAreaRangeMask
                 IpAddress,
             ospfAreaRangeStatus
                 Validation
         }

     ospfAreaRangeAreaID OBJECT-TYPE
         SYNTAX   AreaID
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The Area the Address Range is to be found within."
         REFERENCE
            "OSPF Version 2, Appendix C.2 Area parameters"
         ::= { ospfAreaRangeEntry 1 }

     ospfAreaRangeNet OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The IP Address of the Net or Subnet indicated by the
            range."
         REFERENCE
            "OSPF Version 2, Appendix C.2 Area parameters"
         ::= { ospfAreaRangeEntry 2 }

     ospfAreaRangeMask OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The Subnet Mask that pertains to the Net or Subnet."
         REFERENCE



Baker & Coltun                                                 [Page 20]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            "OSPF Version 2, Appendix C.2 Area parameters"
         ::= { ospfAreaRangeEntry 3 }

     ospfAreaRangeStatus OBJECT-TYPE
         SYNTAX   Validation
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This variable displays the validity or invalidity of
            the entry.  Setting it to 'invalid' has the effect of
            rendering it inoperative.  The internal effect (row
            removal) is implementation dependent."
         DEFVAL   { valid }
         ::= { ospfAreaRangeEntry 4 }


     --  OSPF Host Table

     --      The Host/Metric Table indicates what hosts are directly
     --      attached to the Router, and what metrics and types of
     --      service should be advertised for them.

     ospfHostTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfHostEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The list of Hosts, and their metrics, that the router
            will advertise as host routes."
         REFERENCE
            "OSPF Version 2, Appendix C.6  Host route parameters"
         ::= { ospf 6 }

     ospfHostEntry OBJECT-TYPE
         SYNTAX   OspfHostEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "A metric to be advertised, for a given type of service,
            when a given host is reachable."
         INDEX { ospfHostIpAddress, ospfHostTOS }
         ::= { ospfHostTable 1 }

     OspfHostEntry ::=
         SEQUENCE {
             ospfHostIpAddress
                 IpAddress,
             ospfHostTOS



Baker & Coltun                                                 [Page 21]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


                 TOSType,
             ospfHostMetric
                 Metric,
             ospfHostStatus
                 Validation
         }

     ospfHostIpAddress OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The IP Address of the Host."
         REFERENCE
            "OSPF Version 2, Appendix C.6 Host route parameters"
         ::= { ospfHostEntry 1 }

     ospfHostTOS OBJECT-TYPE
         SYNTAX   TOSType
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The Type of Service of the route being configured."
         REFERENCE
            "OSPF Version 2, Appendix C.6 Host route parameters"
         ::= { ospfHostEntry 2 }

     ospfHostMetric OBJECT-TYPE
         SYNTAX   Metric
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The Metric to be advertised."
         REFERENCE
            "OSPF Version 2, Appendix C.6 Host route parameters"
         ::= { ospfHostEntry 3 }

     ospfHostStatus OBJECT-TYPE
         SYNTAX   Validation
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This variable displays the validity or invalidity of
            the entry.  Setting it to 'invalid' has the effect of
            rendering it inoperative.  The internal effect (row
            removal) is implementation dependent."
         DEFVAL   { valid }
         ::= { ospfHostEntry 4 }



Baker & Coltun                                                 [Page 22]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     --  OSPF Interface Table

     --      The OSPF Interface Table augments the ifTable with OSPF
     --      specific information.

     ospfIfTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfIfEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The OSPF Interface Table describes the interfaces from
            the viewpoint of OSPF."
         REFERENCE
            "OSPF Version 2, Appendix C.3  Router interface
            parameters"
         ::= { ospf 7 }

     ospfIfEntry OBJECT-TYPE
         SYNTAX   OspfIfEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The OSPF Interface Entry describes one interface from
            the viewpoint of OSPF."
         INDEX { ospfIfIpAddress, ospfAddressLessIf }
         ::= { ospfIfTable 1 }

     OspfIfEntry ::=
         SEQUENCE {
             ospfIfIpAddress
                 IpAddress,
             ospfAddressLessIf
                 INTEGER,
             ospfIfAreaId
                 AreaID,
             ospfIfType
                 INTEGER,
             ospfIfAdminStat
                 Status,
             ospfIfRtrPriority
                 DesignatedRouterPriority,
             ospfIfTransitDelay
                 UpToMaxAge,
             ospfIfRetransInterval
                 UpToMaxAge,
             ospfIfHelloInterval
                 HelloRange,
             ospfIfRtrDeadInterval



Baker & Coltun                                                 [Page 23]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


                 PositiveInteger,
             ospfIfPollInterval
                 PositiveInteger,
             ospfIfState
                 INTEGER,
             ospfIfDesignatedRouter
                 IpAddress,
             ospfIfBackupDesignatedRouter
                 IpAddress,
             ospfIfEvents
                 Counter,
             ospfIfAuthKey
                 OCTET STRING
         }

     ospfIfIpAddress OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The IP address of this OSPF interface."
         ::= { ospfIfEntry 1 }

     ospfAddressLessIf OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "For the purpose of easing the instancing of addressed
            and addressless interfaces; This variable takes the
            value 0 on interfaces with IP Addresses, and the
            corresponding value of ifIndex for interfaces having no
            IP Address."
         ::= { ospfIfEntry 2 }

     ospfIfAreaId OBJECT-TYPE
         SYNTAX   AreaID
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "A 32-bit integer uniquely identifying the area to
            which the interface connects.  Area ID 0.0.0.0 is used
            for the OSPF backbone."
         DEFVAL   { '00000000'H }    -- 0.0.0.0
         ::= { ospfIfEntry 3 }






Baker & Coltun                                                 [Page 24]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     ospfIfType OBJECT-TYPE
         SYNTAX   INTEGER {
                     broadcast (1),
                     nbma (2),
                     pointToPoint (3)
                  }
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The OSPF interface type.

            By way of a default, this field may be intuited from
            the corresponding value of ifType.  Broadcast LANs,
            such as Ethernet and IEEE 802.5, take the value
            'broadcast', X.25, Frame Relay, and similar
            technologies take the value 'nbma', and links that are
            definitively point to point take the value
            'pointToPoint'."
         ::= { ospfIfEntry 4 }

     ospfIfAdminStat OBJECT-TYPE
         SYNTAX   Status
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The OSPF interface's administrative status.  The value
            'enabled' denotes that neighbor relationships may be
            formed on the interface, and the interface will be
            advertised as an internal route to some area.  The
            value 'disabled' denotes that the interface is external
            to OSPF."
         DEFVAL { enabled }
         ::= { ospfIfEntry 5 }

     ospfIfRtrPriority OBJECT-TYPE
         SYNTAX   DesignatedRouterPriority
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The priority of this interface.  Used in multi-access
            networks, this field is used in the designated router
            election algorithm.  The value 0 signifies that the
            router is not eligible to become the designated router
            on this particular network.  In the event of a tie in
            this value, routers will use their router id as a tie
            breaker."
         DEFVAL { 1 }
         ::= { ospfIfEntry 6 }



Baker & Coltun                                                 [Page 25]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     ospfIfTransitDelay OBJECT-TYPE
         SYNTAX   UpToMaxAge
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The estimated number of seconds it takes to transmit a
            link- state update packet over this interface."
         DEFVAL { 1 }
         ::= { ospfIfEntry 7 }

     ospfIfRetransInterval OBJECT-TYPE
         SYNTAX   UpToMaxAge
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The number of seconds between link-state advertisement
            retransmissions, for adjacencies belonging to this
            interface.  This value is also used when retransmitting
            database description and link-state request packets."
         DEFVAL { 5 }
         ::= { ospfIfEntry 8 }

     ospfIfHelloInterval OBJECT-TYPE
         SYNTAX   HelloRange
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The length of time, in seconds, between the Hello
            packets that the router sends on the interface.  This
            value must be the same for all routers attached to a
            common network."
         DEFVAL { 10 }
         ::= { ospfIfEntry 9 }

     ospfIfRtrDeadInterval OBJECT-TYPE
         SYNTAX   PositiveInteger
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The number of seconds that a router's Hello packets
            have not been seen before it's neighbors declare the
            router down.  This should be some multiple of the Hello
            interval.  This value must be the same for all routers
            attached to a common network."
         DEFVAL { 40 }
         ::= { ospfIfEntry 10 }





Baker & Coltun                                                 [Page 26]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     ospfIfPollInterval OBJECT-TYPE
         SYNTAX   PositiveInteger
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The larger time interval, in seconds, between the
            Hello packets sent to an inactive non-broadcast multi-
            access neighbor."
         DEFVAL { 120 }
         ::= { ospfIfEntry 11 }

     ospfIfState OBJECT-TYPE
         SYNTAX   INTEGER {
                     down (1),
                     loopback (2),
                     waiting (3),
                     pointToPoint (4),
                     designatedRouter (5),
                     backupDesignatedRouter (6),
                     otherDesignatedRouter (7)
                  }
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The OSPF Interface State."
         DEFVAL { down }
         ::= { ospfIfEntry 12 }

     ospfIfDesignatedRouter OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The IP Address of the Designated Router."
         DEFVAL   { '00000000'H }    -- 0.0.0.0
         ::= { ospfIfEntry 13 }

     ospfIfBackupDesignatedRouter OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The IP Address of the Backup Designated Router."
         DEFVAL   { '00000000'H }    -- 0.0.0.0
         ::= { ospfIfEntry 14 }






Baker & Coltun                                                 [Page 27]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     ospfIfEvents OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The number of times this OSPF interface has changed
            its state, or an error has occurred."
         DEFVAL   { 0 }
         ::= { ospfIfEntry 15 }

     ospfIfAuthKey OBJECT-TYPE
         SYNTAX   OCTET STRING
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The Authentication Key.  If the Area's Authorization
            Type is simplePassword, and the key length is shorter
            than 8 octets, the agent will left adjust and zero fill
            to 8 octets.

            When read, ospfIfAuthKey always returns an Octet String
            of length zero."
         REFERENCE
            "OSPF Version 2, Section 9 The Interface Data
            Structure"
         DEFVAL   { '0000000000000000'H }    -- 0.0.0.0.0.0.0.0
         ::= { ospfIfEntry 16 }


     --  OSPF Interface Metric Table

     --      The Metric Table describes the metrics to be advertised
     --      for a specified interface at the various types of service.
     --      As such, this table is an adjunct of the OSPF Interface
     --      Table.

     -- Types of service, as defined by RFC 791, have the ability
     -- to request low delay, high bandwidth, or reliable linkage.

     -- For the purposes of this specification, the measure of
     -- bandwidth

     --      Metric = 10^8 / ifSpeed

     -- is the default value.  For multiple link interfaces, note
     -- that ifSpeed is the sum of the individual link speeds.
     -- This yields a number having the following typical values:




Baker & Coltun                                                 [Page 28]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     --      Network Type/bit rate   Metric

     --      >= 100 MBPS                 1
     --      Ethernet/802.3             10
     --      E1                         48
     --      T1 (ESF)                   65
     --       64 KBPS                 1562
     --       56 KBPS                 1785
     --       19.2 KBPS               5208
     --        9.6 KBPS              10416

     -- Routes that are not specified use the default (TOS 0) metric

     ospfIfMetricTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfIfMetricEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The TOS metrics for a non-virtual interface identified
            by the interface index."
         REFERENCE
            "OSPF Version 2, Appendix C.3  Router interface
            parameters"
         ::= { ospf 8 }

     ospfIfMetricEntry OBJECT-TYPE
         SYNTAX   OspfIfMetricEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "A particular TOS metric for a non-virtual interface
            identified by the interface index."
         REFERENCE
            "OSPF Version 2, Appendix C.3  Router interface
            parameters"
         INDEX { ospfIfMetricIpAddress,
                 ospfIfMetricAddressLessIf,
                 ospfIfMetricTOS }
         ::= { ospfIfMetricTable 1 }

     OspfIfMetricEntry ::=
         SEQUENCE {
             ospfIfMetricIpAddress
                 IpAddress,
             ospfIfMetricAddressLessIf
                 INTEGER,
             ospfIfMetricTOS
                 TOSType,



Baker & Coltun                                                 [Page 29]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


             ospfIfMetricMetric
                 Metric,
             ospfIfMetricStatus
                 Validation
         }

     ospfIfMetricIpAddress OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The IP address of this OSPF interface.  On row
            creation, this can be derived from the instance."
         ::= { ospfIfMetricEntry 1 }

     ospfIfMetricAddressLessIf OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "For the purpose of easing the instancing of addressed
            and addressless interfaces; This variable takes the
            value 0 on interfaces with IP Addresses, and the value
            of ifIndex for interfaces having no IP Address.  On row
            creation, this can be derived from the instance."
         ::= { ospfIfMetricEntry 2 }

     ospfIfMetricTOS OBJECT-TYPE
         SYNTAX   TOSType
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The type of service metric being referenced.  On row
            creation, this can be derived from the instance."
         ::= { ospfIfMetricEntry 3 }

     ospfIfMetricMetric OBJECT-TYPE
         SYNTAX   Metric
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The metric of using this type of service on this
            interface.  The default value of the TOS 0 Metric is
            10^8 / ifSpeed.

            The value FFFF is distinguished to mean 'no route via
            this TOS'."
         ::= { ospfIfMetricEntry 4 }



Baker & Coltun                                                 [Page 30]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


     ospfIfMetricStatus OBJECT-TYPE
         SYNTAX   Validation
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This variable displays the validity or invalidity of
            the entry.  Setting it to 'invalid' has the effect of
            rendering it inoperative.  The internal effect (row
            removal) is implementation dependent."
         DEFVAL   { valid }
         ::= { ospfIfMetricEntry 5 }


     --  OSPF Virtual Interface Table

     --      The Virtual Interface Table describes the virtual
     --      links that the OSPF Process is configured to
     --      carry on.

     ospfVirtIfTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfVirtIfEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "Information about this router's virtual interfaces."
         REFERENCE
            "OSPF Version 2, Appendix C.4  Virtual link parameters"
         ::= { ospf 9 }

     ospfVirtIfEntry OBJECT-TYPE
         SYNTAX   OspfVirtIfEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "Information about a single Virtual Interface."
         INDEX { ospfVirtIfAreaID, ospfVirtIfNeighbor }
         ::= { ospfVirtIfTable 1 }

     OspfVirtIfEntry ::=
         SEQUENCE {
             ospfVirtIfAreaID
                 AreaID,
             ospfVirtIfNeighbor
                 RouterID,
             ospfVirtIfTransitDelay
                 UpToMaxAge,
             ospfVirtIfRetransInterval
                 UpToMaxAge,



Baker & Coltun                                                 [Page 31]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


             ospfVirtIfHelloInterval
                 HelloRange,
             ospfVirtIfRtrDeadInterval
                 PositiveInteger,
             ospfVirtIfState
                 INTEGER,
             ospfVirtIfEvents
                 Counter,
             ospfVirtIfAuthKey
                 OCTET STRING,
             ospfVirtIfStatus
                 Validation
         }

     ospfVirtIfAreaID OBJECT-TYPE
         SYNTAX   AreaID
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The Transit Area that the Virtual Link traverses.  By
            definition, this is not 0.0.0.0"
         ::= { ospfVirtIfEntry 1 }

     ospfVirtIfNeighbor OBJECT-TYPE
         SYNTAX   RouterID
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The Router ID of the Virtual Neighbor."
         ::= { ospfVirtIfEntry 2 }

     ospfVirtIfTransitDelay OBJECT-TYPE
         SYNTAX   UpToMaxAge
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The estimated number of seconds it takes to transmit a
            link- state update packet over this interface."
         DEFVAL { 1 }
         ::= { ospfVirtIfEntry 3 }

     ospfVirtIfRetransInterval OBJECT-TYPE
         SYNTAX   UpToMaxAge
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The number of seconds between link-state advertisement
            retransmissions, for adjacencies belonging to this



Baker & Coltun                                                 [Page 32]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            interface.  This value is also used when retransmitting
            database description and link-state request packets.
            This value should be well over the expected round-trip
            time."
         DEFVAL { 5 }
         ::= { ospfVirtIfEntry 4 }

     ospfVirtIfHelloInterval OBJECT-TYPE
         SYNTAX   HelloRange
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The length of time, in seconds, between the Hello
            packets that the router sends on the interface.  This
            value must be the same for the virtual neighbor."
         DEFVAL { 10 }
         ::= { ospfVirtIfEntry 5 }

     ospfVirtIfRtrDeadInterval OBJECT-TYPE
         SYNTAX   PositiveInteger
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The number of seconds that a router's Hello packets
            have not been seen before it's neighbors declare the
            router down.  This should be some multiple of the Hello
            interval.  This value must be the same for the virtual
            neighbor."
         DEFVAL { 60 }
         ::= { ospfVirtIfEntry 6 }

     ospfVirtIfState OBJECT-TYPE
         SYNTAX   INTEGER {
                     down (1),            -- these use the same encoding
                     pointToPoint (4)     -- as the ospfIfTable
                  }
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "OSPF virtual interface states."
         DEFVAL   { down }
         ::= { ospfVirtIfEntry 7 }

     ospfVirtIfEvents OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION



Baker & Coltun                                                 [Page 33]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            "The number of state changes or error events on this
            Virtual Link"
         DEFVAL   { 0 }
         ::= { ospfVirtIfEntry 8 }

     ospfVirtIfAuthKey OBJECT-TYPE
         SYNTAX   OCTET STRING
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "If Authentication Type is simplePassword, the device
            will left adjust and zero fill to 8 octets.

            When read, ospfVifAuthKey always returns a string of
            length zero."
         REFERENCE
            "OSPF Version 2, Section 9 The Interface Data
            Structure"
         DEFVAL   { '0000000000000000'H }    -- 0.0.0.0.0.0.0.0
         ::= { ospfVirtIfEntry 9 }

     ospfVirtIfStatus OBJECT-TYPE
         SYNTAX   Validation
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This variable displays the validity or invalidity of
            the entry.  Setting it to 'invalid' has the effect of
            rendering it inoperative.  The internal effect (row
            removal) is implementation dependent."
         DEFVAL   { valid }
         ::= { ospfVirtIfEntry 10 }


     --  OSPF Neighbor Table

     --      The OSPF Neighbor Table describes all neighbors in
     --      the locality of the subject router.

     ospfNbrTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfNbrEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "A table of non-virtual neighbor information."
         REFERENCE
            "OSPF Version 2, Section 10 The Neighbor Data
            Structure"



Baker & Coltun                                                 [Page 34]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


         ::= { ospf 10 }

     ospfNbrEntry OBJECT-TYPE
         SYNTAX   OspfNbrEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The information regarding a single neighbor."
         REFERENCE
            "OSPF Version 2, Section 10 The Neighbor Data
            Structure"
         INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
         ::= { ospfNbrTable 1 }

     OspfNbrEntry ::=
         SEQUENCE {
             ospfNbrIpAddr
                 IpAddress,
             ospfNbrAddressLessIndex
                 InterfaceIndex,
             ospfNbrRtrId
                 RouterID,
             ospfNbrOptions
                 INTEGER,
             ospfNbrPriority
                 DesignatedRouterPriority,
             ospfNbrState
                 INTEGER,
             ospfNbrEvents
                 Counter,
             ospfNbrLSRetransQLen
                 Gauge,
             ospfNBMANbrStatus
                 Validation
         }

     ospfNbrIpAddr OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The IP address of this neighbor."
         ::= { ospfNbrEntry 1 }

     ospfNbrAddressLessIndex OBJECT-TYPE
         SYNTAX   InterfaceIndex
         ACCESS   read-write
         STATUS   mandatory



Baker & Coltun                                                 [Page 35]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


         DESCRIPTION
            " On an interface having an IP Address, zero.  On
            addressless interfaces, the corresponding value of
            ifIndex in the Internet Standard MIB.  On row creation,
            this can be derived from the instance."
         ::= { ospfNbrEntry 2 }

     ospfNbrRtrId OBJECT-TYPE
         SYNTAX   RouterID
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "A 32-bit integer (represented as a type IpAddress)
            uniquely identifying the neighboring router in the
            Autonomous System."
         DEFVAL   { '00000000'H }    -- 0.0.0.0
         ::= { ospfNbrEntry 3 }

     ospfNbrOptions OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "A Bit Mask corresponding to the neighbor's options
            field.

            Bit 0, if set, indicates that the area accepts and
            operates on external information; if zero, it is a stub
            area.

            Bit 1, if set, indicates that the system will operate
            on Type of Service metrics other than TOS 0.  If zero,
            the neighbor will ignore all metrics except the TOS 0
            metric."
         REFERENCE
            "OSPF Version 2, Section 12.1.2 Options"
         DEFVAL { 0 }
         ::= { ospfNbrEntry 4 }

     ospfNbrPriority OBJECT-TYPE
         SYNTAX   DesignatedRouterPriority
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The priority of this neighbor in the designated router
            election algorithm.  The value 0 signifies that the
            neighbor is not eligible to become the designated
            router on this particular network."



Baker & Coltun                                                 [Page 36]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


         DEFVAL { 1 }
         ::= { ospfNbrEntry 5 }

     ospfNbrState OBJECT-TYPE
         SYNTAX   INTEGER {
                     down (1),
                     attempt (2),
                     init (3),
                     twoWay (4),
                     exchangeStart (5),
                     exchange (6),
                     loading (7),
                     full (8)
                  }
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The State of the relationship with this Neighbor."
         REFERENCE
            "OSPF Version 2, Section 10.1 Neighbor States"
         DEFVAL   { down }
         ::= { ospfNbrEntry 6 }

     ospfNbrEvents OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The number of times this neighbor relationship has
            changed state, or an error has occurred."
         DEFVAL   { 0 }
         ::= { ospfNbrEntry 7 }

     ospfNbrLSRetransQLen OBJECT-TYPE
         SYNTAX   Gauge
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The current length of the retransmission queue."
         DEFVAL   { 0 }
         ::= { ospfNbrEntry 8 }

     ospfNBMANbrStatus OBJECT-TYPE
         SYNTAX   Validation
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This variable displays the validity or invalidity of



Baker & Coltun                                                 [Page 37]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


            the entry.  Setting it to 'invalid' has the effect of
            rendering it inoperative.  The internal effect (row
            removal) is implementation dependent."
         DEFVAL { valid }
         ::= { ospfNbrEntry 9 }


     --  OSPF Virtual Neighbor Table

     --      This table describes all virtual neighbors.
     --      Since Virtual Links are configured in the
     --      virtual interface table, this table is read-only.

     ospfVirtNbrTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF OspfVirtNbrEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "A table of virtual neighbor information."
         REFERENCE
            "OSPF Version 2, Section 15  Virtual Links"
         ::= { ospf 11 }

     ospfVirtNbrEntry OBJECT-TYPE
         SYNTAX   OspfVirtNbrEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "Virtual neighbor information."
         INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
         ::= { ospfVirtNbrTable 1 }

     OspfVirtNbrEntry ::=
         SEQUENCE {
             ospfVirtNbrArea
                 AreaID,
             ospfVirtNbrRtrId
                 RouterID,
             ospfVirtNbrIpAddr
                 IpAddress,
             ospfVirtNbrOptions
                 INTEGER,
             ospfVirtNbrState
                 INTEGER,
             ospfVirtNbrEvents
                 Counter,
             ospfVirtNbrLSRetransQLen
                 Gauge



Baker & Coltun                                                 [Page 38]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


         }

     ospfVirtNbrArea OBJECT-TYPE
         SYNTAX   AreaID
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The Transit Area Identifier."
         ::= { ospfVirtNbrEntry 1 }

     ospfVirtNbrRtrId OBJECT-TYPE
         SYNTAX   RouterID
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "A 32-bit integer uniquely identifying the neighboring
            router in the Autonomous System."
         ::= { ospfVirtNbrEntry 2 }

     ospfVirtNbrIpAddr OBJECT-TYPE
         SYNTAX   IpAddress
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The IP address this Virtual Neighbor is using."
         ::= { ospfVirtNbrEntry 3 }

     ospfVirtNbrOptions OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "A bit map corresponding to the neighbor's options
            field.  Thus, Bit 1, if set, indicates that the
            neighbor supports Type of Service Routing; if zero, no
            metrics other than TOS 0 are in use by the neighbor."
         ::= { ospfVirtNbrEntry 4 }

     ospfVirtNbrState OBJECT-TYPE
         SYNTAX   INTEGER {
                     down (1),
                     attempt (2),
                     init (3),
                     twoWay (4),
                     exchangeStart (5),
                     exchange (6),
                     loading (7),
                     full (8)



Baker & Coltun                                                 [Page 39]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


                  }
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The state of the Virtual Neighbor Relationship."
         ::= { ospfVirtNbrEntry 5 }

     ospfVirtNbrEvents OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The number of times this virtual link has changed its
            state, or an error has occurred."
         DEFVAL   { 0 }
         ::= { ospfVirtNbrEntry 6 }

     ospfVirtNbrLSRetransQLen OBJECT-TYPE
         SYNTAX   Gauge
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The current length of the retransmission queue."
         ::= { ospfVirtNbrEntry 7 }

     END

6.  Acknowledgements

   This document was produced by the OSPF Working Group, of which the
   Chairman is John Moy of Proteon.

   In addition, the comments of the following individuals are also
   acknowledged:

          John Moy                Proteon, Inc
          Dino Farinacci          3COM
          Stan Froyd              Advanced Computer Communications
          Steve Willis            Wellfleet
          John Burress            Wellfleet
          Keith McCloghrie        Hughes LAN Systems

7.  References

   [1] Cerf, V., "IAB Recommendations for the Development of Internet
       Network Management Standards", RFC 1052, NRI, April 1988.

   [2] Cerf, V., "Report of the Second Ad Hoc Network Management Review



Baker & Coltun                                                 [Page 40]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


       Group", RFC 1109, NRI, August 1989.

   [3] Rose M., and K. McCloghrie, "Structure and Identification of
       Management Information for TCP/IP-based internets", RFC 1155,
       Performance Systems International, Hughes LAN Systems, May 1990.

   [4] McCloghrie K., and M. Rose, "Management Information Base for
       Network Management of TCP/IP-based internets", RFC 1156, Hughes
       LAN Systems, Performance Systems International, May 1990.

   [5] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
       Network Management Protocol", RFC 1157, SNMP Research,
       Performance Systems International, Performance Systems
       International, MIT Laboratory for Computer Science, May 1990.

   [6] Rose M., Editor, "Management Information Base for Network
       Management of TCP/IP-based internets: MIB-II", RFC 1213,
       Performance Systems International, March 1991.

   [7] Information processing systems - Open Systems Interconnection -
       Specification of Abstract Syntax Notation One (ASN.1),
       International Organization for Standardization, International
       Standard 8824, December 1987.

   [8] Information processing systems - Open Systems Interconnection -
       Specification of Basic Encoding Rules for Abstract Notation One
       (ASN.1), International Organization for Standardization,
       International Standard 8825, December 1987.

   [9] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
       RFC 1212, Performance Systems International, Hughes LAN Systems,
       March 1991.

  [10] Moy, J., Editor, "The OSPF Specification, Version 2", RFC 1247,
       Proteon, Inc., July 1991.

8.  Security Considerations

   Security issues are not discussed in this memo.












Baker & Coltun                                                 [Page 41]
^L
RFC 1248                   OSPF Version 2 MIB                  July 1991


9.  Authors' Addresses

   Fred Baker
   Advanced Computer Communications
   720 Santa Barbara Street
   Santa Barbara, California  93101

   Phone: (805) 963-9431
   EMail:  fbaker@acc.com


   Rob Coltun
   Computer Science Center
   Computer and Space Sciences Building
   College Park, Maryland 20742

   Phone: (301) 921-8600
   EMail: rcoltun@ni.umd.edu

   Or send comments to ospf@trantor.umd.edu.































Baker & Coltun                                                 [Page 42]
^L