diff options
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 364 |
1 files changed, 249 insertions, 115 deletions
@@ -17,139 +17,273 @@ $ ./make # Build the project $ ./make install # Install the project ``` -By default Grab is linked against the PCRE2 library for PCRE support. If -you prefer to simply use POSIX EREs, you can pass `--no-pcre` to the -build script: +If you want to build with optimizations enabled, you can pass the `-r` +flag. ```sh -$ ./make --no-pcre -``` - -If you want to build with optimizations enabled, you can pass the -`--release` flag. You can additionally pass the `--lto` flag to enable -link-time optimizations: - -```sh -$ ./make --release --lto +$ ./make -r ``` ## Description -Grab invocations must include a pattern string which specifies which text -to match. A pattern string consists of one or more commands. A command -is an operator followed by a delimiter, a regular expression (regex), and -then terminated by the same delimiter. The last delimiter of the last -command is optional. - -For example, a pattern string may look like ‘`x/[a-z]+/ g.foo. v/bar/`’. - -The available operators are ‘g’, ‘G’, ‘h’, ‘H’, ‘x’, and ‘X’. The ‘g’ -and ‘G’ operators are filter operators, the ‘h’ and ‘H’ operators are -highlighting operators, and ‘x’ and ‘X’ are selection operators. - -You probably want to begin your pattern with a selection operator. By -default the entire contents of the file you’re searching through will be -selected, but you probably want to shrink that down to a specific query. -With ‘x’ you can specify what text you want to select in the file. For -example ‘`x/[0-9]+/`’ will select all numbers: - -```sh -echo 'foo12bar34baz' | grab 'x/[0-9]+/' -# ⇒ 12 -# ⇒ 34 -``` - -The ‘X’ operator works in reverse, selecting everything that _doesn’t_ -match the given regex: - -```sh -echo 'foo12bar34baz' | grab 'X/[0-9]+/' -# ⇒ foo -# ⇒ bar -# ⇒ baz -``` - -You can additionally use filter operators to keep or discard certain -results. The ‘g’ operator will filter out any results that don’t match -the given regex, while the ‘G’ operator will do the opposite. To select -all numbers that contain a ‘3’ we can thus do: - -``` sh -echo 'foo12bar34baz' | grab 'x/[0-9]+/ g/3/' -# ⇒ 34 - -# If we had used ‘x’ instead of ‘g’, the result would have just been ‘3’. -# Filter operators do not modify the selections; they merely filter them. -``` - -Likewise to select all numbers that don’t contain a ‘3’: - -```sh -echo 'foo12bar34baz' | grab 'x/[0-9]+/ G/3/' -# ⇒ 12 ``` +GRAB(1) General Commands Manual GRAB(1) + +NAME + grab, git grab — search for patterns in files + +SYNOPSIS + grab [-H never | multi | always] [-bcilLpsUz] pattern [file ...] + grab -h + + git grab [-H never | multi | always] [-bcilLpsUz] pattern [glob + ...] + git grab -h + +DESCRIPTION + The grab utility searches for text matching the given pattern in + the files listed on the command-line, printing the matches to the + standard-output. Unlike the grep(1) utility, grab is not + strictly line-oriented; the structure of matches is left up to + the user to define. For more details on the pattern syntax, see + “Pattern Syntax”. + + The git grab utility is identical to the grab utility except that + it takes globs matching files as command-line arguments instead + of files, and processes all non-binary files in the current git + repository that match the provided globs. If no globs are pro‐ + vided, all non-binary files in the current git repository are + processed. + + grab will read from the files provided on the command-line. If + no files are provided, the standard-input will be read instead. + The special filename ‘-’ can also be provided, which represents + the standard-input. + + Similar to the grep(1) utility matches are printed to the stan‐ + dard output. They are additionally prefixed with the name of the + file in which pattern was matched, as well as the location of the + match. + + The options are as follows: + + -b, --byte-offset + Report the positions of pattern matches as the (zero- + based) byte offset of the match from the beginning of the + file. + + This option is useful if your text editor (such as vim(1) + or emacs(1)) supports jumping directly to a given byte + offset/position. + + This is the default behaviour if the -L option is not + provided. + + -c, --color + Force colored output, even if the output device is not a + TTY. This is useful when piping the output of grab into + a pager such as less(1). + + This option takes precedence over the environment vari‐ + ables described in “ENVIRONMENT” that relate to the usage + of color. + + -h, --help + Display help information by opening this manual page. + + -H, --header-line=when + Control the usage of a dedicated header line, where the + filename and match position are printed on a dedicated + line above the match. The available options for when + are: + + never never use a dedicated header line + always always use a dedicated header line + multi use a dedicated header line when the matched pat‐ + tern spans multiple lines + + -i, --ignore-case + Match patterns case-insensitively. + + -l, --literal + Treat patterns as literal strings, i.e. don’t interpret + them as regular expressions. + + -L, --line-position + Report the positions of matches as a (one-based) line- + and column position separated by a colon. + + This option may be ill-advised in many circumstances. + See “BUGS” for more details. + + -p, --predicate + Return an exit status indicating if a match was found + without writing any output to the standard output. When + simply checking for the presence of a pattern in an in‐ + put, this option is far more efficient than redirecting + output to /dev/null. + + -s, --strip-newline + Don’t print a newline at the end of a match if the match + already ends in a newline. This can make output seem + more ‘natural’, as many matches will already have termi‐ + nating newlines. + + -U, --no-unicode + Don’t use Unicode properties when matching \d, \w, etc. + Recognize only ASCII values instead. + + -z, --zero + Separate output data by null bytes (‘\0’) instead of new‐ + lines. This option can be used to process matches con‐ + taining newlines. + + Pattern Syntax + A pattern is a sequence of whitespace-separated commands. A com‐ + mand is a sequence of an operator, an opening delimiter, a regu‐ + lar expression, a closing delimter, and zero-or-more flags. The + last command of a pattern if given no flags need not have a clos‐ + ing delimter. + + The supported operators are as follows: + + g Keep matches that match the given regex. + G Keep matches that don’t match the given regex. + h Highlight substrings in matches that match the given + regex. + H Highlight substrings in matches that don’t match the + given regex. + x Select everything that matches the given regex. + X Select everything that doesn’t match the given regex. + + An example pattern to match all numbers that contain a ‘3’ but + aren’t ‘1337’ could be ‘x/[0-9]+/ g/3/ G/^1337$/’. In that pat‐ + tern, ‘x/[0-9]+/’ selects all numbers in the input, ‘g/3/’ keeps + only those matches that contain the number 3, and ‘G/^1337$/’ + filters out the specific number 1337. + + The opening- and closing-delimiter used for each given command + can be any valid UTF-8 codepoint. As a result, the following + pattern using the delimiters ‘|’, ‘.’, and ‘ä’ is well-formed: + + x|[0-9]+| g.3. Gä^1337$ä + + Delimeters also respect the Unicode ‘Bidirectional Paired + Bracket’ property. This means that alongside the previous exam‐ + ples, the following non-exhaustive list of character pairs may be + used as opening- and closing delimiters: + + • ｢…｣ + • ⟮…⟯ + • ⟨…⟩ + + It is not recommended that you use characters that have a special + meaning in regular expression syntax as delimiters, unless you’re + using literal patterns via the -l option or the ‘l’ command flag. + + Operators are not allowed to take empty regular expression argu‐ + ments with one exception: ‘h’. When given an empty regular ex‐ + pression argument, the ‘h’ operator assumes the same regular ex‐ + pression as the previous operator. This allows you to avoid du‐ + plication in the common case where a user wishes to highlight + text matched by a ‘g’ or ‘x’ operator. The following example + pattern selects all words that have a capital letter, and high‐ + lights the capital letter(s): + + x/\w+/ g/\p{Lu}/ h// + + The empty ‘h’ operator is not permitted as the first operator in + a pattern. + + While various command-line options exist to alter the behaviour + of patterns such as -i to enable case-insensitive matching or -U + to disable Unicode support, various different options can also be + set at the command-level by appending a command with one-or-more + flags. As an example, one could match all sequences of one-or- + more non-whitespace characters that contain the case-insensitive + literal string ‘[hi]’ by using the following pattern: + + x/\S+/ g/[hi]/li + + The currently supported flags are as follows: + + i/I enable or disable case-insensitive matching respectively + l/L enable or disable treating the supplied regex as a fixed + string + u/U enable or disable Unicode support respectively + +ENVIRONMENT + Do not display any colored output when set to a non-empty string, + even if the standard-output is a terminal. This environment + variable takes precedence over CLICOLOR_FORCE. + Force display of colored output when set to a non-empty string, + even if the standard-output isn’t a terminal. + If set to ‘dumb’ disables colored output, taking precedence over + all other environment variables. + +EXIT STATUS + The grab utility exits with one of the following values: + + 0 One or more matches were selected. + 1 No matches were selected. + 2 A non-fatal error occured, such as failure to read + a file. + >2 A fatal error occured. + +EXAMPLES + List all your systems CPU flags, sorted and without duplicates: + + $ grab 'x/^flags.*?$/ x/\w+/ G/^flags$/' </proc/cpuinfo | + sort -u + + Search for a pattern in multiple files without printing filenames + or position information: + + $ cat file1 file2 file3 | grab 'x/pattern/' + + Search for usages of an ‘<hb-form-text>’ Vue component — but only + those which are being passed a ‘placeholder’ property — searching + all files in the current git-repository: -You can also chain these together. To get all numbers in a file that -contain a ‘3’ but aren’t the specific number ‘1337’, we could do the -following: - -```sh -grab 'x/[0-9]+/ g/3/ G/^1337$/' /foo/bar -``` - -The final set of operators are highlighting operators. They don’t change -the text that is ultimately matched in any manner, but instead highlight -the matched text in the output. If given the empty regular expression -the ‘h’ operator will highlight according to the same regular expression -as the previous operator. - -The following examples select words with a capital letter, and highlights -all the capital letters: - -```sh -# These are both the same -grab 'x/\w+/ g/[A-Z]/ h/[A-Z]/' /foo/bar -grab 'x/\w+/ g/[A-Z]/ h//' /foo/bar -``` + $ git grab 'x/<hb-form-text.*?>/ g/\bplaceholder\b/' + '*.vue' + + Extract bibliographic references from mdoc(7) formatted manual + pages: + + $ grab 'x/(^\.%.*?\n)+/' foo.1 bar.1 +SEE ALSO + git(1), grep(1), pcre2syntax(3), regex(7) -## Examples + Rob Pike, Structural Regular Expressions, + https://doc.cat-v.org/bell_labs/structural_regexps/se.pdf, AT&T + Bell Laboratories, Murray Hill, New Jersey 07974, 1987. -### Get a list of your CPU flags. + SGR Parameters: + https://en.wikipedia.org/wiki/ANSI_escape_code#SGR -```sh -# With Grep -grep '^flags' /proc/cpuinfo \ -| sed 's/flags:\t*: //; y/ /\n/' \ -| sort \ -| uniq - -# With Grab -grab 'x/^flags.*/ x/\w+/ G/flags/' /proc/cpuinfo \ -| sort \ -| uniq -``` +AUTHORS + Thomas Voss <mail@thomasvoss.com> -1) Select lines that start with ‘flags’: `x/^flags.*/` -2) Select all the words: `x/\w+/` -3) Filter out the word ‘flags’: `G/flags/` +NOTES + When pattern matching with literal strings you should avoid using + delimeters that are contained within the search string as any + backslashes used to escape the delimeters will be searched for in + the text literally. +BUGS + The pattern string provided as a command-line argument as well as + the provided input files must be encoded as UTF-8. No other en‐ + codings are supported unless they are UTF-8 compatible, such as + ASCII. -### Find `<my-tag>` tags with the attribute `data-attr` in a Git repo + The -L option has incredibly poor performance compared to the -b + option, especially with very large inputs. -```sh -git grab 'x/<my-tag.*?>/ g/data-attr/' '*.html' +Grab 3.0.0 13 November, 2024 GRAB(1) ``` -1) Select all tags matching `<my-tag>` -2) Filter out tags without `data-attr` - - -## Additional Options - -The Grab utility has a few options that may be helpful for your usecase. -For more detailed documentation, see the Grab manual with `man grab`. - [1]: https://doc.cat-v.org/bell_labs/structural_regexps/se.pdf |