Run ‘make check’ and fix various typos

8 files changed, 926 insertions, 15 deletions

diff --git a/src/ame/index.gsp b/src/ame/index.gsp
index e0ed55b..6659d57 100644
--- a/src/ame/index.gsp
+++ b/src/ame/index.gsp
@@ -34,7 +34,7 @@ html lang="en" {
 				machines to toggle folder visibility with a password.  That became
 				necessary because the genius m4_abbr(IT) guys at our school decided we
 				should all save our work onto a shared m4_abbr(NAS) where everyone has
-				read+write access to everyone elses work.  @em {-How could that ever go
+				read+write access to everyone else’s work.  @em {-How could that ever go
 				wrong.}
 			}
 
diff --git a/src/ame/index.gsp.bak b/src/ame/index.gsp.bak
new file mode 100644
index 0000000..e0ed55b
--- /dev/null
+++ b/src/ame/index.gsp.bak
@@ -0,0 +1,92 @@
+html lang="en" {
+	head { m4_include(head.gsp) }
+	body {
+		header {
+			div {
+				h1 {-About Me}
+				m4_include(nav.gsp)
+			}
+
+			figure .quote {
+				blockquote {
+					p {=
+						One obvious advantage [of lisp syntax] is that there hardly *is* any
+						syntax.  You can learn enough Lisp syntax to write useful programs
+						in about ten minutes.
+					}
+				}
+				figcaption {-Mark J. Dominus}
+			}
+		}
+
+		main {
+			p {-
+				If you are a prospective employer, you can view my m4_abbr(CV)
+				@a href="https://cv.thomasvoss.com" target="_blank" {-here}.
+			}
+
+			h2 {-Who Am I}
+
+			p {-
+				I’m Thomas.  A self-taught software developer from Brazil and the
+				Netherlands who grew up in the Middle East.  I started to code at the
+				age of 9, writing batch scripts @x-ref {-1} on my schools Windows 7
+				machines to toggle folder visibility with a password.  That became
+				necessary because the genius m4_abbr(IT) guys at our school decided we
+				should all save our work onto a shared m4_abbr(NAS) where everyone has
+				read+write access to everyone elses work.  @em {-How could that ever go
+				wrong.}
+			}
+
+			aside {
+				p data-ref="1" {-
+					Shoutouts to
+					@a
+						href="https://www.instructables.com/member/Prof.%20Pickle/"
+						target="_blank"
+					{-
+						Prof. Pickle on Instructables
+					}
+					by the way.  Most of his stuff seems to have been deleted all these
+					years later, but he was the guy I learnt to code from.
+				}
+			}
+
+			p {-
+				These days my interests lie mostly in m4_abbr(CLI) development.  I take
+				a great joy in writing simple yet highly effective tools to solve
+				problems not only in the easiest way, but also in the most extensible
+				way possible.  I think my batch file-renaming utility @em {-mmv}
+				@a href="/prj/mmv" {-does a great job at that}.
+			}
+
+			p {-
+				That being said, I also have a great interest in operating systems,
+				shells, and really anything that could be considered remotely low-level.
+				I’m not totally afraid of front-end development, although I @em {-did}
+				write this site in plain m4_abbr(HTML) and m4_abbr(CSS) because modern
+				m4_abbr(HTML) frameworks are the worst excuses for software I have ever
+				seen.
+			}
+
+			p {-
+				As for my religious- and political beliefs, let’s make those
+				clear:
+				@ul {
+					li {-Spaces should never be used for indentation}
+					li {-Tabs should never be used for alignment}
+					li {-Emacs is better than Vim}
+					li {-The dominance of VSCode is an embarrassment to our industry}
+					li {-
+						Object-oriented programming, Java, JavaScript, and m4_abbr(XML) were
+						all massive mistakes
+					}
+					li {-C is far superior to C++}
+					li {-Rust is not gods chosen language (even if it’s pretty cool)}
+				}
+			}
+		}
+
+		footer { m4_footer }
+	}
+}
diff --git a/src/prj/mmv/index.gsp b/src/prj/mmv/index.gsp
index 3c2fd97..f049426 100644
--- a/src/prj/mmv/index.gsp
+++ b/src/prj/mmv/index.gsp
@@ -270,8 +270,8 @@ html lang="en" {
 					}
 					p {-
 						If combined with the @code{--0} flag, then while input will be read
-						assuming a NUL-byte input-seperator, the encoded input files will be
-						written to the spawned process newline-seperated.
+						assuming a NUL-byte input-separator, the encoded input files will be
+						written to the spawned process newline-separated.
 					}
 				}
 			}
@@ -332,7 +332,7 @@ html lang="en" {
 
 			p {-
 				So we’re getting places, but we aren’t quite there yet.  The issue we’re
-				getting now is that @code{-mmv} recieved 2 input files from the standard
+				getting now is that @code{-mmv} received 2 input files from the standard
 				input, but @code{-rev} produced 3 output files.  Why is that?  Well
 				let’s try our hand at a little bit of command-line debugging with
 				@code{-sed}:
@@ -365,7 +365,7 @@ html lang="en" {
 			p {-
 				In the @code{-sed} output, we can see that @samp{-$} represents the end
 				of a line, and @samp{-\\000} represents the NUL-byte.  All looks good
-				here, we have two inputs seperated by NUL-bytes.  Now let’s try to throw
+				here, we have two inputs separated by NUL-bytes.  Now let’s try to throw
 				in @code{-rev}:
 			}
 
@@ -375,7 +375,7 @@ html lang="en" {
 
 			p {-
 				Well wouldn’t you know it?  Since @code{-rev} @em{-also} works with
-				newline-seperated input, it reversed out NUL-byte seperators and now
+				newline-separated input, it reversed out NUL-byte separators and now
 				gives us 3 outputs.  Luckily the folks over at @em{-util-linux} provided
 				us with the @code{--0} flag here too, so that we can properly handle
 				NUL-delimited input. Combining all of this together we get a final
@@ -393,7 +393,7 @@ html lang="en" {
 				use doesn’t support NUL-bytes as nicely as we would like.  In these
 				cases, you may want to consider encoding your newline characters into
 				the literal string ‘@code{-\\n}’ and then passing your input
-				newline-seperated to your given command with the @code{--e} flag.
+				newline-separated to your given command with the @code{--e} flag.
 			}
 
 			p {-
@@ -415,7 +415,7 @@ html lang="en" {
 			aside {
 				p {-
 					Notice how you still need to pass the @code{--0} flag to @code{-mmv}
-					know that our inputfiles may have embedded newlines.
+					know that our input files may have embedded newlines.
 				}
 			}
 
@@ -429,8 +429,8 @@ html lang="en" {
 			}
 
 			p {-
-				After you exit your editor, @code{-mmv} will decode all occurances of
-				‘@code{-\\n}’ back into a newline, and all occurances of ‘@code{-\\\\}’
+				After you exit your editor, @code{-mmv} will decode all occurrences of
+				‘@code{-\\n}’ back into a newline, and all occurrences of ‘@code{-\\\\}’
 				back into a backslash:
 			}
 
@@ -441,11 +441,11 @@ html lang="en" {
 			h2 #i-flag {-Individual Execution}
 			p {-
 				The previous examples are great and all, but what do you do if your
-				mapping command doesn’t have the concept of an input seperator at all?
+				mapping command doesn’t have the concept of an input separator at all?
 				This is where the @code{--i} flag comes into play.  With the @code{--i}
 				flag we can get @code{-mmv} to execute our mapping command for every
 				input filename.  This means that as long as we can work with a complete
-				buffer, we don’t need to worry about seperators.
+				buffer, we don’t need to worry about separators.
 			}
 
 			p {-
@@ -524,7 +524,7 @@ html lang="en" {
 				}
 				li {-
 					In the case that something goes wrong during execution (perhaps you
-					tried to move a file to a non-existant directory, or a syscall
+					tried to move a file to a non-existent directory, or a syscall
 					failed), a backup of your input files is saved automatically by
 					@code{-mmv} for recovery.
 				}
diff --git a/src/prj/mmv/index.gsp.bak b/src/prj/mmv/index.gsp.bak
new file mode 100644
index 0000000..3c2fd97
--- /dev/null
+++ b/src/prj/mmv/index.gsp.bak
@@ -0,0 +1,645 @@
+html lang="en" {
+	head { m4_include(head.gsp) }
+	body {
+		header {
+			div {
+				h1 {-Moving Files the Right Way}
+				m4_include(nav.gsp)
+			}
+
+			figure .quote {
+				blockquote {
+					p {=
+						I think the OpenBSD crowd is a bunch of masturbating monkeys, in
+						that they make such a big deal about concentrating on security to
+						the point where they pretty much admit that nothing else matters to
+						them.
+					}
+				}
+				figcaption {-Linus Torvalds}
+			}
+		}
+
+		main {
+			p {
+				em {-
+					You can find the @code{-mmv} git repository over at
+					@a
+						href="https://git.sr.ht/~mango/mmv"
+						target="_blank"
+					{-sourcehut}
+					or
+					@a
+						href="https://github.com/Mango0x45/mmv"
+					  target="_blank"
+					{-GitHub}.
+				}
+			}
+
+			p {-
+				NOTE: As of the
+				@a href="https://git.sr.ht/~mango/mmv/refs/v1.2.0" {-v1.2.0}
+				release there is now also the @code{-mcp} utility.  It behaves the same
+				as the @code{-mmv} utility but it copies files instead of moving them.
+				It also doesn’t support the ‘@code{--n}’ flag as it doesn’t need to deal
+				with backups.
+			}
+
+			h2 {-Table of Contents}
+
+			ul {
+				li {a href="#prologue" {-Prologue}}
+				li {a href="#moving" {-Advanced Moving and Pitfalls}}
+				li {a href="#mapping" {-Name Mapping with @code{-mmv}}}
+				li {a href="#newlines" {-Filenames with Embedded Newlines}}
+				ul {
+					li {a href="0-flag" {-The Simple Case}}
+					li {a href="#e-flag" {-Encoding Newlines}}
+				}
+				li {a href="#i-flag" {-Individual Execution}}
+				li {a href="#safety" {-Safety}}
+				li {a href="#examples" {-Examples}}
+			}
+			
+			h2 #prologue {-Prologue}
+			p {-
+				File moving and renaming is one of the most common tasks we undertake on
+				the command-line.  We basically always do this with the @code{-mv}
+				utility, and it gets the job done most of the time.  Want to rename one
+				file?  Use @code{-mv}!  Want to move a bunch of files into a directory?
+				Use @code{-mv}! How could mv ever go wrong?  Well I’m glad you asked!
+			}
+
+			h2 #moving {-Advanced Moving and Pitfalls}
+			p {-
+				Let’s start off nice and simple.  You just inherited a C project that
+				uses the sacrilegious
+				@a
+					href="https://en.wikipedia.org/wiki/Camel_case"
+					target="_blank"
+				{-camelCase}
+				naming convention for its files:
+			}
+
+			figure {
+				pre { m4_fmt_code(ls-files.sh.gsp) }
+			}
+
+			p {-
+				This deeply upsets you, as it upsets me.  So you decide you want to
+				switch all these files to use
+				@a
+					href="https://en.wikipedia.org/wiki/Snake_case"
+					target="_blank"
+				{-snake_case},
+				like a normal person.  Well how would you do this?  You use @code{-mv}!
+				This is what you might end up doing:
+			}
+
+			figure {
+				pre { m4_fmt_code(manual-mv.sh.gsp) }
+			}
+
+			p {-
+				Well… it works I guess, but it’s a pretty shitty way of renaming these
+				files.  Luckily we only had 5, but what if this was a much larger
+				project with many more files to rename?  Things would get tedious.  So
+				instead we can use a pipeline for this:
+			}
+
+			figure {
+				pre { m4_fmt_code(camel-to-snake-naïve.sh.gsp) }
+			}
+
+			aside {
+				p {-
+					The given example assumes your @code{-sed} implementation supports
+					‘@code{-\\L}’ which is a non-standard m4_abbr(GNU) extension.
+				}
+			}
+
+			p {-
+				That works and it gets the job done, but it’s not really ideal is
+				it?  There are a couple of issues with this.
+			}
+
+			ol {
+				li {
+					p {-
+						You’re writing more complicated code.  This has the obvious drawback
+						of potentially being more error-prone, but also risks taking more
+						time to write than you’d like as you might have forgotten if
+						@code{-xargs} actually has an ‘@code{--L}’ option or not (which
+						would require reading the
+						@a
+							href="https://www.man7.org/linux/man-pages/man1/xargs.1.html"
+							target="_blank"
+						{
+							code {-xargs(1)}
+						}
+						manual).
+					}
+				}
+				li {
+					p {-
+						If you try to rename the file @em{-foo} to @em{-bar} but @em{-bar}
+						already exists, you end up deleting a file you may not have wanted
+						to.
+					}
+				}
+				li {
+					p {-
+						In a similar vein to the previous point, you need to be very careful
+						about schemes like renaming the file @em{-a} to @em{-b} and @em{-b}
+						to @em{-c}.  You run the risk of turning @em{-a} into @em{-c} and
+						losing the file @em{-b} entirely.
+					}
+				}
+				li {
+					p {-
+						Moving symbolic links is its own whole can of worms.  If a symlink
+						points to a relative location then you need to make sure you keep
+						pointing to the right place.  If the symlink is absolute however
+						then you can leave it untouched.  But what if the symlink points to
+						a file that you’re moving as part of your batch move operation? Now
+						you need to handle that too.
+					}
+				}
+			}
+
+			h2 #mapping {-Name Mapping with @code{-mmv}}
+
+			p {-
+				What is @code{-mmv}?  It’s the solution to all your problems, that’s
+				what it is!  @code{-mmv} takes as its argument(s) a utility and that
+				utilities arguments and uses that to create a mapping between old and
+				new filenames — similar to the @code{-map()} function found in many
+				programming languages.  I think to best convey how the tool functions, I
+				should provide an example.  Let’s try to do the same thing we did
+				previously where we tried to turn camelCase files to snake_case, but
+				using @code{-mmv}:
+			}
+
+			figure {
+				pre { m4_fmt_code(camel-to-snake-smart.sh.gsp) }
+			}
+
+			p {-Let me break down how this works.}
+
+			p {-
+				@code{-mmv} starts by reading a series of filenames separated by
+				newlines from the standard input.  Yes, sometimes filenames have
+				newlines in them and yes there is a way to handle them but I shall get
+				to that later.  The filenames that @code{-mmv} reads from the standard
+				input will be referred to as the @em{-input files}.  Once all the input
+				files have been read, the utility specified by the arguments is spawned;
+				in this case that would be @code{-sed} with the argument
+				@code{-'s/[A-Z]/\\L_&/g'}. The input files are then piped into
+				@code{-sed} the exact same way that they would have been if we ran the
+				above commands without @code{-mmv}, and the output of @code{-sed} then
+				forms what will be referred to as the @em{-output files}.  Once a
+				complete list of output files is accumulated, each input file gets
+				renamed to its corresponding output file.
+			}
+
+			p {-
+				Let’s look at a simpler example.  Say we want to rename 2 files in the
+				current directory to use lowercase letters, we could use the following
+				command:
+			}
+			
+			figure {
+				pre { m4_fmt_code(mmv-tr.sh.gsp) }
+			}
+
+			p {-
+				In the above example @code{-mmv} reads 2 lines from standard input,
+				those being @em{-LICENSE} and @em{-README}.  Those are our 2 input files
+				now. The @code{-tr} utility is then spawned and the input files are
+				piped into it.  We can simulate this in the shell:
+			}
+
+			figure {
+				pre { m4_fmt_code(tr.sh.gsp) }
+			}
+
+			p {-
+				As you can see above, @code{-tr} has produced 2 lines of output; these
+				are our 2 output files.  Since we now have our 2 input files and 2
+				output files, @code{-mmv} can go ahead and rename the files.  In this
+				case it will rename @em{-LICENSE} to @em{-license} and @em{-README} to
+				@em{-readme}.  For some examples, check the @a href="#examples"
+				{-examples} section of this page down below.
+			}
+
+			h2 #newlines {-Filenames with Embedded Newlines}
+
+			p {-
+				People are retarded, and as a result we have filenames with newlines in
+				them.  All it would have taken to solve this issue for everyone was for
+				literally @strong{-anybody} during the early UNIX days to go “@em{-hey,
+				this is a bad idea!}”, but alas, we must deal with this.  Newlines are
+				of course not the only special characters filenames can contain, but
+				they are the single most infuriating to deal with; the UNIX utilities
+				all being line-oriented really doesn’t work well with these files.
+			}
+
+			p {-
+				So how does @code{-mmv} deal with special characters, and newlines in
+				particular?  Well it does so by providing the user with the @code{--0}
+				and @code{--e} flags:
+			}
+
+			dl {
+				dt { code{--0} }
+				dd {
+					p {-
+						Tell @code{-mmv} to expect its input to not be separated by newlines
+						(‘@code{-\\n}’), but by NUL bytes (‘@code{-\\0}’).  NUL bytes are
+						the only characters not allowed in filenames besides forward
+						slashes, so they are an obvious choice for an alternative separator.
+					}
+				}
+				dt { code{--e} }
+				dd {
+					p {-
+						Encode newlines in filenames before passing them to the provided
+						utility.  Newline characters are replaced by the literal string
+						‘@code{-\\n}’ and backslashes by the literal string ‘@code{-\\\\}’.
+						After processing, the resulting output is decoded again.
+					}
+					p {-
+						If combined with the @code{--0} flag, then while input will be read
+						assuming a NUL-byte input-seperator, the encoded input files will be
+						written to the spawned process newline-seperated.
+					}
+				}
+			}
+
+			h3 id="0-flag" {-The Simple Case}
+
+			p {-
+				In order to better understand these flags and how they work let’s go
+				though another example.  We have 2 files — one with and one without an
+				embedded newline — and our goal is to simply reverse these filenames.
+				In this example I am going to be displaying newlines in filenames with
+				the “@code{-$'\\n'}” syntax as this is how my shell displays embedded
+				newlines.
+			}
+
+			p {-
+				We can start by just trying to naïvely pass these 2 files to @code{-mmv}
+				and use @code{-rev} to reverse the names, but this doesn’t work:
+			}
+
+			figure {
+				pre { m4_fmt_code(mmv-rev.sh.gsp) }
+			}
+
+			p {-
+				The reason this doesn’t work is because due to the line-oriented nature
+				of @code{-ls} and @code{-rev}, we are actually trying to rename the
+				files @em{-foo}, @em{-bar}, and @em{-baz} to the new filenames
+				@em{-zab}, @em{-rab}, and @em{-oof}.  As can be seen in the following
+				diagram, the embedded newline is causing our input to be ambiguous and
+				@code{-mmv} can’t reliably proceed anymore @x-ref{-1}:
+			}
+
+			figure {
+				object data="conflict.svg" type="image/svg+xml" {-}
+			}
+
+			aside {
+				p data-ref="1" {-
+					The reason you get a cryptic “file not found” error message is because
+					@code{-mmv} tries to assert that all the input files actually exist
+					before doing anything.  Since “foo” isn’t a real file, we error out.
+				}
+			}
+			
+			p {-
+				The first thing we need to do in order to proceed is to pass the
+				@code{--0} flag to @code{-mmv}.  This will tell @code{-mmv} that we want
+				to use the NUL-byte as our input separator and not the newline.  We also
+				need @code{-ls} to actually provide us with the filenames delimited by
+				NUL-bytes. Luckily m4_abbr(GNU) @code{-ls} gives us the @code{---zero}
+				flag to do just that:
+			}
+
+			figure {
+			  pre { m4_fmt_code(mmv-rev-zero.sh.gsp) }
+			}
+
+			p {-
+				So we’re getting places, but we aren’t quite there yet.  The issue we’re
+				getting now is that @code{-mmv} recieved 2 input files from the standard
+				input, but @code{-rev} produced 3 output files.  Why is that?  Well
+				let’s try our hand at a little bit of command-line debugging with
+				@code{-sed}:
+			}
+
+			figure {
+				pre { m4_fmt_code(sed-debugging.sh.gsp) }
+			}
+
+			p {-
+				If you aren’t quite sure what the above is doing, here’s a quick
+				summary:
+			}
+
+			ul {
+				li {-
+					The @code{--U} flag given to @code{-ls} tells it not to sort our
+					output.  This is purely just to keep this example clear to the reader.
+				}
+				li {-
+					The @code{--n} flag given to @code{-sed} tells it not to print the
+					input line automatically at the end of the provided script.
+				}
+				li {-
+					The @code{-l} command in @code{-sed} prints the current input in a
+					“visually unambiguous form”.
+				}
+			}
+
+			p {-
+				In the @code{-sed} output, we can see that @samp{-$} represents the end
+				of a line, and @samp{-\\000} represents the NUL-byte.  All looks good
+				here, we have two inputs seperated by NUL-bytes.  Now let’s try to throw
+				in @code{-rev}:
+			}
+
+			figure {
+				pre { m4_fmt_code(sed-debugging-rev.sh.gsp) }
+			}
+
+			p {-
+				Well wouldn’t you know it?  Since @code{-rev} @em{-also} works with
+				newline-seperated input, it reversed out NUL-byte seperators and now
+				gives us 3 outputs.  Luckily the folks over at @em{-util-linux} provided
+				us with the @code{--0} flag here too, so that we can properly handle
+				NUL-delimited input. Combining all of this together we get a final
+				working product:
+			}
+
+			figure {
+				pre { m4_fmt_code(reverse-embedded-newline.sh.gsp) }
+			}
+
+			h3 #e-flag {-Encoding Newlines}
+
+			p {-
+				Sometimes we want to rename a bunch of files, but the command we want to
+				use doesn’t support NUL-bytes as nicely as we would like.  In these
+				cases, you may want to consider encoding your newline characters into
+				the literal string ‘@code{-\\n}’ and then passing your input
+				newline-seperated to your given command with the @code{--e} flag.
+			}
+
+			p {-
+				For a real-world example, perhaps you want to edit some filenames in
+				vim, or whatever other editor you use.  Well we can do this incredibly
+				easily with the @code{-vipe} utility from the
+				@a href="https://joeyh.name/code/moreutils/" {-moreutils}
+				collection.  The @code{-vipe} command simply reads input from the
+				standard input, opens it up in your editor, and then prints the
+				resulting output to the standard output; perfect for @code{-mmv}!  We do
+				not really want to deal with NUL-bytes in our text-editor though, so
+				let’s just encode our newlines:
+			}
+
+			figure {
+				pre { m4_fmt_code(vipe.sh.gsp) }
+			}
+
+			aside {
+				p {-
+					Notice how you still need to pass the @code{--0} flag to @code{-mmv}
+					know that our inputfiles may have embedded newlines.
+				}
+			}
+
+			p {-
+				When running the above code example, you will see the following in your
+				editor:
+			}
+
+			figure {
+				pre { m4_fmt_code(vim.gsp) }
+			}
+
+			p {-
+				After you exit your editor, @code{-mmv} will decode all occurances of
+				‘@code{-\\n}’ back into a newline, and all occurances of ‘@code{-\\\\}’
+				back into a backslash:
+			}
+
+			figure {
+				object data="e-flag.svg" type="image/svg+xml" {-}
+			}
+
+			h2 #i-flag {-Individual Execution}
+			p {-
+				The previous examples are great and all, but what do you do if your
+				mapping command doesn’t have the concept of an input seperator at all?
+				This is where the @code{--i} flag comes into play.  With the @code{--i}
+				flag we can get @code{-mmv} to execute our mapping command for every
+				input filename.  This means that as long as we can work with a complete
+				buffer, we don’t need to worry about seperators.
+			}
+
+			p {-
+				To be honest, I cannot really think of any situation where you might
+				actually need to do this.  If you can think of one, please @a
+				href="mailto:mail@thomasvoss.com" {-email me} and I’ll update the
+				example on this page.  Regardless, let’s imagine that we wanted to
+				rename some files so that their filenames are replaced with their
+				filename
+				@a
+					href="https://en.wikipedia.org/wiki/SHA-1"
+					target="_blank"
+				{-m4_abbr(SHA)-1 hash}.
+				On Linux we have the @code{-sha1sum} program which reads input from the
+				standard input and outputs the m4_abbr(SHA)-1 hash.  This is how we
+				would use it with @code{-mmv}:
+			}
+
+			figure {
+				pre { m4_fmt_code(sha1sum-long-example.sh.gsp) }
+			}
+
+			p {-
+				Another approach is to invoke @code{-mmv} twice:
+			}
+
+			figure {
+				pre { m4_fmt_code(sha1sum-short-example.sh.gsp) }
+			}
+
+			p {-
+				If you are confused about why we need to make a call to @code{-awk},
+				it’s because the @code{-sha1sum} program outputs 2 columns of data.  The
+				first column is our hash and the second column is the filename where the
+				to-be-hashed data was read from.  We don’t want the second column.
+			}
+
+			p {-
+				Unlike in previous examples where one process was spawned to map all our
+				filenames, with the @code{--i} flag we are spawning a new instance for
+				each filename.  If you struggle to visualize this, perhaps the following
+				diagrams help:
+			}
+
+			figure {
+				figcaption {-Invoking @code{-mmv} without @code{--i}}
+				object data="without-i-flag.svg" type="image/svg+xml" {-}
+			}
+
+			figure {
+				figcaption {-Invoking @code{-mmv} with @code{--i}}
+				object data="with-i-flag.svg" type="image/svg+xml" {-}
+			}
+
+			h2 #safety {-Safety}
+			p {-
+				When compared to the standard @code{-for f in *; do mv $f …; done} or
+				@code{-ls | … | xargs -L2 mv} constructs, @code{-mmv} is significantly
+				more safe to use. These are some of the safety features that are built
+				into the tool:
+			}
+
+			ol {
+				li {-
+					If the number of input- and output files differs, execution is aborted
+					before making any changes.
+				}
+				li {-
+					If an input file is renamed to the name of another input file, the
+					second input file is not lost (i.e. you can rename @em{-a} to @em{-b}
+					and @em{-b} to @em{-a} with no problem).
+				}
+				li {-
+					All input files must be unique and all output files must be unique.
+					Otherwise execution is aborted before making any changes.
+				}
+				li {-
+					In the case that something goes wrong during execution (perhaps you
+					tried to move a file to a non-existant directory, or a syscall
+					failed), a backup of your input files is saved automatically by
+					@code{-mmv} for recovery.
+				}
+			}
+
+			p {-
+				Due to the way @code{-mmv} handles #2, when things do go wrong you may
+				find that all of your input files have disappeared.  Don’t worry though,
+				@code{-mmv} takes a backup of your code before doing anything.  If you
+				run @code{-mmv} with the @code{--v} option for verbose output, you’ll
+				notice it backing up your stuff in the @code{-$XDG_CACHE_DIR} directory:
+			}
+
+			figure {
+				pre { m4_fmt_code(mmv-verbose.sh.gsp) }
+			}
+
+			p {-
+				Upon successful execution the @code{-$XDG_CACHE_DIR/mmv/TIMESTAMP}
+				directory will be automatically removed, but it remains when things go
+				wrong so that you can recover any missing data.  The names of the
+				backup-subdirectories in the @code{-$XDG_CACHE_DIR/mmv} directory are
+				timestamps of when the directories were created. This should make it
+				easier for you to figure out which directory you need to recover if you
+				happen to have multiple of these.
+			}
+			
+			h2 #examples {-Examples}
+
+			aside {
+				p {-
+					All of these examples are ripped straight from the @code{-mmv(1)}
+					manual page. If you installed @code{-mmv} through a package manager or
+					via @code{-make install} then you should have the manual installed on
+					your system.
+				}
+			}
+
+			p {-Swap the files @em{-foo} and @em{-bar}:}
+			figure {
+				pre { m4_fmt_code(examples/swap.sh.gsp) }
+			}
+
+			p {-
+				Rename all files in the current directory to use hyphens (‘-’) instead
+				of spaces:
+			}
+			figure {
+				pre { m4_fmt_code(examples/hyphens.sh.gsp) }
+			}
+
+			p {-
+				Rename a given list of movies to use lowercase letters and hyphens
+				instead of uppercase letters and spaces, and number them so that they’re
+				properly ordered in globs (e.g. rename @em{-The Return of the King.mp4}
+				to @em{-02-the-return-of-the-king.mp4}):
+			}
+			figure {
+				pre { m4_fmt_code(examples/number.sh.gsp) }
+			}
+
+			p {-
+				Rename files interactively in your editor while encoding newline into
+				the literal string ‘@code{-\\n}’, making use of
+				@code {
+					a
+						href="https://linux.die.net/man/1/vipe"
+						target="_blank"
+					{-vipe(1)}
+				}
+				from @em{-moreutils}:
+			}
+			figure {
+				pre { m4_fmt_code(examples/vipe.sh.gsp) }
+			}
+
+			p {-
+				Rename all C source code- and header files in a git repository
+				to use snake_case instead of camelCase using
+				the m4_abbr(GNU)
+				@code {
+					a
+						href="https://www.man7.org/linux/man-pages/man1/sed.1.html"
+						target="_blank"
+					{-sed(1)}
+				}
+				‘@code{-\\n}’ extension:
+			}
+			figure {
+				pre { m4_fmt_code(examples/camel-to-snake.sh.gsp) }
+			}
+
+			p {-
+				Lowercase all filenames within a directory hierarchy which may contain
+				newline characters:
+			}
+			figure {
+				pre { m4_fmt_code(examples/lowercase.sh.gsp) }
+			}
+
+			p {-
+				Map filenames which may contain newlines in the current directory with
+				the command ‘@code{-cmd}’, which itself does not support nul-byte
+				separated entries.  This only works assuming your mapping doesn’t
+				require any context outside of the given input filename (for example,
+				you would not be able to number your files as this requires knowledge of
+				the input files position in the input list):
+			}
+			figure {
+				pre { m4_fmt_code(examples/i-flag.sh.gsp) }
+			}
+		}
+
+		hr{}
+
+		footer { m4_footer }
+	}
+}
diff --git a/src/prj/totp/index.gsp b/src/prj/totp/index.gsp
index ea5637a..c447242 100644
--- a/src/prj/totp/index.gsp
+++ b/src/prj/totp/index.gsp
@@ -38,7 +38,7 @@ html lang="en" {
 
 			h2 #prologue {-Prologue}
 			p {-
-				m4_abbr(TOTP) codes are pretty cool, and really easay to do.  They’re
+				m4_abbr(TOTP) codes are pretty cool, and really easy to do.  They’re
 				also the backbone of modern two-factor authentication.  With
 				@code{-totp} I hope to handling m4_abbr(TOTP) codes as easy and
 				extensible as possible
diff --git a/src/prj/totp/index.gsp.bak b/src/prj/totp/index.gsp.bak
new file mode 100644
index 0000000..ea5637a
--- /dev/null
+++ b/src/prj/totp/index.gsp.bak
@@ -0,0 +1,134 @@
+html lang="en" {
+	head { m4_include(head.gsp) }
+	body {
+		header {
+			div {
+				h1 {-Easy Password Generation}
+				m4_include(nav.gsp)
+			}
+
+			figure .quote {
+				blockquote {
+					p {=
+						The C preprocessor is worse than m4, and I would kill myself before I
+						had to use m4.
+					}
+				}
+				figcaption {-Arav K.}
+			}
+		}
+
+		main {
+			p {
+				em {-
+					You can find the @code{-totp} git repository over at
+					@a href="https://git.sr.ht/~mango/totp" target="_blank" {-sourcehut}
+					or
+					@a href="https://github.com/Mango0x45/totp" target="_blank" {-GitHub}.
+				}
+			}
+
+			h2 {-Table of Contents}
+			ul {
+				li {a href="#prologue" {-Prologue}}
+				li {a href="#terms" {-Terminology}}
+				li {a href="#usage" {-Basic Usage}}
+				li {a href="#qr" {-Working with QR Codes}}
+			}
+
+			h2 #prologue {-Prologue}
+			p {-
+				m4_abbr(TOTP) codes are pretty cool, and really easay to do.  They’re
+				also the backbone of modern two-factor authentication.  With
+				@code{-totp} I hope to handling m4_abbr(TOTP) codes as easy and
+				extensible as possible
+			}
+
+			h2 #terms {-Terminology}
+			p {-
+				There are a few terms that I will be using throughout this post, so it’s
+				good to make sure that we’re all on the same page about what I’m
+				referring to.
+			}
+
+			dl {
+				dt {-Secret}
+				dd {
+					p {-
+						Your @em{-secret} is a
+						@a
+							href="https://en.wikipedia.org/wiki/Base32"
+							target="_blank"
+						{-base32}
+						encoded secret key that you should under no circumstances share with
+						anyone else.  It is from this secret key that we can generate valid
+						m4_abbr(TOTP) codes.
+					}
+				}
+
+				dt {-Digits}
+				dd {
+					p {-
+						Your @em {-digits} is the length of the generated m4_abbr(TOTP) in
+						digits.  If @em{-digits} is 8, then your generated key could be
+						‘01234567’.  When dealing with m4_abbr(2FA) this is typically 6.
+					}
+				}
+
+				dt {-Period}
+				dd {
+					p {-
+						Your @em{-period} it the duration for which the generated key is
+						valid in seconds.  When working with m4_abbr(2FA) this is typically
+						30.
+					}
+				}
+			}
+
+			h2 #usage {-Basic Usage}
+
+			p {-
+				@code{-totp} takes secret keys as command-line arguments, but also reads
+				them from the standard input if none are provided.  It assumes that
+				@em{-digits} is 6 and @em{-period} is 30.  These defaults can be changed
+				with the @code{--d} and @code{--p} flags.
+			}
+
+			figure {
+				pre { m4_fmt_code(basic-usage.sh.gsp) }
+			}
+
+			aside {
+				p {-
+					I’m using @code{-mkpass} to generate a random secret.  You can
+					see my post about @code{-mkpass} @a href="/prj/mkpass" {-here}.
+				}
+			}
+
+			h2 #qr {-Working with m4_abbr(QR) Codes}
+			p {-
+				Often times when enabling m4_abbr(2FA) on your account on some website
+				or platform, you will be shown a m4_abbr(QR) code you can scan with your
+				m4_abbr(2FA) mobile application.  These m4_abbr(QR) codes contain
+				@em{-otpauth} m4_abbr(URI)s.  We can extract these from downloaded
+				images using utilities such as @code{-zbarimg} and use them in
+				@code{-totp} using the @code{--u} flag to enable ‘m4_abbr(URI) mode’
+			}
+
+			figure {
+				pre { m4_fmt_code(zbarimg.sh.gsp) }
+			}
+
+			p {-
+				…and that’s all!  There’s nothing else you need.  You can use secret
+				keys and otpauth m4_abbr(URI)s, and you can configure the @em{-digits}
+				and @em{-period} of the generated codes.  You can generate multiple keys
+				at once, and all outputs are printed to the standard output.
+			}
+		}
+
+		hr{}
+
+		footer { m4_footer }
+	}
+}
diff --git a/src/srp/index.gsp b/src/srp/index.gsp
index 8b2ddad..da62301 100644
--- a/src/srp/index.gsp
+++ b/src/srp/index.gsp
@@ -3,7 +3,7 @@ html lang="en" {
 	body {
 		header {
 			div {
-				h1 {-Sortware-Related Posts}
+				h1 {-Software-Related Posts}
 				m4_include(nav.gsp)
 			}
 
diff --git a/src/srp/index.gsp.bak b/src/srp/index.gsp.bak
new file mode 100644
index 0000000..8b2ddad
--- /dev/null
+++ b/src/srp/index.gsp.bak
@@ -0,0 +1,40 @@
+html lang="en" {
+	head { m4_include(head.gsp) }
+	body {
+		header {
+			div {
+				h1 {-Sortware-Related Posts}
+				m4_include(nav.gsp)
+			}
+
+			figure .quote {
+				blockquote {
+					p {=
+						Object-oriented programming is an exceptionally bad idea which could
+						only have originated in California.
+					}
+				}
+				figcaption {-Edsgar W. Dijkstra}
+			}
+		}
+
+		main {
+			p {-
+				In this section of the website I cover random software-related stuff
+				that isn’t related to actual projects of mine.  Posts here could be
+				about anything from a cool program I found, to a patch I wrote, to me
+				complaining about bad software design.
+			}
+
+			p {-Posts:}
+
+			ul {
+				li {a href="fw-ec" {-Patching My Laptop’s Embedded Controller}}
+			}
+		}
+
+		hr{}
+
+		footer { m4_footer }
+	}
+}