Run ‘make check’ and fix various typos

2 files changed, 135 insertions, 1 deletions

diff --git a/src/prj/totp/index.gsp b/src/prj/totp/index.gsp
index ea5637a..c447242 100644
--- a/src/prj/totp/index.gsp
+++ b/src/prj/totp/index.gsp
@@ -38,7 +38,7 @@ html lang="en" {
 
 			h2 #prologue {-Prologue}
 			p {-
-				m4_abbr(TOTP) codes are pretty cool, and really easay to do.  They’re
+				m4_abbr(TOTP) codes are pretty cool, and really easy to do.  They’re
 				also the backbone of modern two-factor authentication.  With
 				@code{-totp} I hope to handling m4_abbr(TOTP) codes as easy and
 				extensible as possible
diff --git a/src/prj/totp/index.gsp.bak b/src/prj/totp/index.gsp.bak
new file mode 100644
index 0000000..ea5637a
--- /dev/null
+++ b/src/prj/totp/index.gsp.bak
@@ -0,0 +1,134 @@
+html lang="en" {
+	head { m4_include(head.gsp) }
+	body {
+		header {
+			div {
+				h1 {-Easy Password Generation}
+				m4_include(nav.gsp)
+			}
+
+			figure .quote {
+				blockquote {
+					p {=
+						The C preprocessor is worse than m4, and I would kill myself before I
+						had to use m4.
+					}
+				}
+				figcaption {-Arav K.}
+			}
+		}
+
+		main {
+			p {
+				em {-
+					You can find the @code{-totp} git repository over at
+					@a href="https://git.sr.ht/~mango/totp" target="_blank" {-sourcehut}
+					or
+					@a href="https://github.com/Mango0x45/totp" target="_blank" {-GitHub}.
+				}
+			}
+
+			h2 {-Table of Contents}
+			ul {
+				li {a href="#prologue" {-Prologue}}
+				li {a href="#terms" {-Terminology}}
+				li {a href="#usage" {-Basic Usage}}
+				li {a href="#qr" {-Working with QR Codes}}
+			}
+
+			h2 #prologue {-Prologue}
+			p {-
+				m4_abbr(TOTP) codes are pretty cool, and really easay to do.  They’re
+				also the backbone of modern two-factor authentication.  With
+				@code{-totp} I hope to handling m4_abbr(TOTP) codes as easy and
+				extensible as possible
+			}
+
+			h2 #terms {-Terminology}
+			p {-
+				There are a few terms that I will be using throughout this post, so it’s
+				good to make sure that we’re all on the same page about what I’m
+				referring to.
+			}
+
+			dl {
+				dt {-Secret}
+				dd {
+					p {-
+						Your @em{-secret} is a
+						@a
+							href="https://en.wikipedia.org/wiki/Base32"
+							target="_blank"
+						{-base32}
+						encoded secret key that you should under no circumstances share with
+						anyone else.  It is from this secret key that we can generate valid
+						m4_abbr(TOTP) codes.
+					}
+				}
+
+				dt {-Digits}
+				dd {
+					p {-
+						Your @em {-digits} is the length of the generated m4_abbr(TOTP) in
+						digits.  If @em{-digits} is 8, then your generated key could be
+						‘01234567’.  When dealing with m4_abbr(2FA) this is typically 6.
+					}
+				}
+
+				dt {-Period}
+				dd {
+					p {-
+						Your @em{-period} it the duration for which the generated key is
+						valid in seconds.  When working with m4_abbr(2FA) this is typically
+						30.
+					}
+				}
+			}
+
+			h2 #usage {-Basic Usage}
+
+			p {-
+				@code{-totp} takes secret keys as command-line arguments, but also reads
+				them from the standard input if none are provided.  It assumes that
+				@em{-digits} is 6 and @em{-period} is 30.  These defaults can be changed
+				with the @code{--d} and @code{--p} flags.
+			}
+
+			figure {
+				pre { m4_fmt_code(basic-usage.sh.gsp) }
+			}
+
+			aside {
+				p {-
+					I’m using @code{-mkpass} to generate a random secret.  You can
+					see my post about @code{-mkpass} @a href="/prj/mkpass" {-here}.
+				}
+			}
+
+			h2 #qr {-Working with m4_abbr(QR) Codes}
+			p {-
+				Often times when enabling m4_abbr(2FA) on your account on some website
+				or platform, you will be shown a m4_abbr(QR) code you can scan with your
+				m4_abbr(2FA) mobile application.  These m4_abbr(QR) codes contain
+				@em{-otpauth} m4_abbr(URI)s.  We can extract these from downloaded
+				images using utilities such as @code{-zbarimg} and use them in
+				@code{-totp} using the @code{--u} flag to enable ‘m4_abbr(URI) mode’
+			}
+
+			figure {
+				pre { m4_fmt_code(zbarimg.sh.gsp) }
+			}
+
+			p {-
+				…and that’s all!  There’s nothing else you need.  You can use secret
+				keys and otpauth m4_abbr(URI)s, and you can configure the @em{-digits}
+				and @em{-period} of the generated codes.  You can generate multiple keys
+				at once, and all outputs are printed to the standard output.
+			}
+		}
+
+		hr{}
+
+		footer { m4_footer }
+	}
+}